Installation via CFE web UI:
1. Power off the router.
2. Press reset button near the antenna.
3. Keep it pressed while powering up during ~20+ seconds.
4. Browse to http://192.168.1.1 and upload the firmware.
5. Wait a few minutes for it to finish.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 3baa45fbd8)
Installation via CFE web UI:
1. Power off the router and make a temporal TX-RX shortcircuit on the
serial pins.
2. Power on the router and wait 3 or more seconds
3. Remove the TX-RX shortcircuit
4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the
firmware
5. Wait a few minutes for it to finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Thomas Schröder [Fri, 9 Jun 2023 10:03:31 +0000 (12:03 +0200)]
ramips: fix button definitions for Zyxel WSM20
Setting the events of the WPS and LED buttons to
the best matching values based from the documentation:
<https://openwrt.org/docs/guide-user/hardware/hardware.button#procd_buttons>
Arınç ÜNAL [Fri, 9 Jun 2023 08:55:21 +0000 (11:55 +0300)]
ramips: fix first boot network configuration for TOZED ZLT S12 PRO
The network configuration at first boot for TOZED ZLT S12 PRO lacks setting
up the LAN and WAN network interfaces. Address this. The WAN port is
advertised as WAN/LAN on the device and is put on LAN on stock firmware so
put it on LAN here as well.
Fixes: ce1f9fa625 ("ramips: add support for TOZED ZLT S12 PRO") Reported-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
(cherry picked from commit b61253f92abb4c0d21ec7358a74438eae8d7e6b4)
kernel: use struct group to wipe psb6970 volatile priv data
Instead of reference vlan and do strange subtraction, use the handy
struct_group() to create a virtual struct of the same size of the
members. This permits to have a more secure memset and fix compilation
warning in 6.1 where additional checks are done.
Fix compilation warning:
| inlined from 'psb6970_reset_switch' at drivers/net/phy/psb6970.c:275:2:
| ./include/linux/fortify-string.h:314:25: error: call to '__write_overflow_field'
| declared with attribute warning: detected write beyond size of field
| (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
| 314 | __write_overflow_field(p_size_field, size);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|cc1: all warnings being treated as errors
bmips: add support for Netgear DGND3700 v1, DGND3800B
The Netgear DGND3700 v1 and DGND3800B are the same device but with
different factory firmwares. It's an xDSL wifi router with a slim black
shiny casing and 4 PCB internal antennas connected via UFL to a miniPCI
detachable card.
Installation via OEM web UI:
1. Open the Netgear administration web interface, by default:
http://192.168.0.1
user: admin
password: password
2. Look for "upgrade firmware" and proceed
3. Wait some minutes until it finishes
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Installation via OEM web UI:
1. Use the admin credentials to login via web UI
2. Go to Managament->Update firmware and select the OpenWrt CFE firmware
3. Press "Update Firmware" button and wait some minutes until it finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
This allows booting bigger ramdisk images via TFTP at the cost of breaking 32M
RAM compatibility, but those devices have been unable to boot ramdisks on this
target for some time anyway due to not having enough RAM.
Daniel Golle [Tue, 6 Jun 2023 12:05:50 +0000 (13:05 +0100)]
mediatek: use DEVICE_DTC_FLAGS and drop DTC_FLAGS where not needed
The MT7986 RFB was intended to use device tree overlays and for that
reason modified DTC_FLAGS. zyxel_ex5601-t0-stock later on probably
copied it from there. Both boards do not actually use device tree
overlays, so remove setting DTC_FLAGS from both.
The BPi-R3 does use device tree overlays, use DEVICE_DTC_FLAGS to give
it an extra 4kb of padding for overlays to be applied.
Daniel Golle [Tue, 6 Jun 2023 12:01:15 +0000 (13:01 +0100)]
image: introduce DEVICE_DTC_FLAGS and DEVICE_DTCO_FLAGS
Handle compiling device tree overlay blobs separate to allow for
overlays being compiled with different parameters, mostly to safe
space.
Allow defining DEVICE_DTC_FLAGS and DEVICE_DTCO_FLAGS as per-device
parameters to be passed to dtc. Previously some boards directly used
DTC_FLAGS in their build recipe which then also affected other boards.
Daniel Golle [Tue, 6 Jun 2023 00:14:27 +0000 (01:14 +0100)]
mediatek: set new compat version if booted on R64 and R3
If the board comes up with OpenWrt that means that the bootloader is
recent enough and knows about the new device tree overlays.
Using /etc/board.d/ is not enough in this case because it doesn't
overwrite existing configuration which may exist (and is fine to exist)
if the user updated with 'sysupgrade -F *.itb' and has kept
configuration. They would still need to manually set compat_version
even though the fact that the bootloader env has been updated can be
implied by the fact that the system has started.
Hence we can always set compat_version=1.1 for those two boards using
uci-defaults.
Daniel Golle [Sun, 4 Jun 2023 17:55:17 +0000 (18:55 +0100)]
uboot-mediatek: adapt BPi-R3 and BPi-R64 to new device tree overlay
Update bootloader environment for BPi-R3 and BPi-R64 to adapt to new
device tree overlay mechanism now that support for multiple device
tree overlays has been added.
Daniel Golle [Sun, 4 Jun 2023 17:21:29 +0000 (18:21 +0100)]
generic: use only first element in bootconf for uImage.FIT
Now that it is possible to load several device tree overlays by
appending their config names to bootconf the uImage.FIT partition
parser need to discard everything after the first '#' character in
bootconf when looking up the config node to be used.
Daniel Golle [Sun, 4 Jun 2023 14:57:25 +0000 (15:57 +0100)]
image: improve uImage.FIT device tree overlay support
Instead of generating full config nodes incl. kernel, generate minimal
config nodes for device tree overlays to be applied to the main config.
In this way, multiple device tree overlays can be applied more easily.
While at it change filenames to upstream style, ie. use dtso and dtbo
suffix for device tree overlays.
Daniel Golle [Thu, 1 Jun 2023 09:32:19 +0000 (10:32 +0100)]
mediatek: use existing I2C clock names
PCK and MCK should really be P=PMIC and M=MEM, which means that they
should effectively be CLK_PMIC and CLK_ARB.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 0580747adab2094862c18b5e762c908dd3b43236)
Ivan Pavlov [Sun, 4 Jun 2023 19:34:39 +0000 (22:34 +0300)]
openssl: update to 3.0.9
CVE-2023-2650 fix
Remove upstreamed patches
Major changes between OpenSSL 3.0.8 and OpenSSL 3.0.9 [30 May 2023]
* Mitigate for very slow OBJ_obj2txt() performance with gigantic OBJECT IDENTIFIER sub-identities. (CVE-2023-2650)
* Fixed buffer overread in AES-XTS decryption on ARM 64 bit platforms (CVE-2023-1255)
* Fixed documentation of X509_VERIFY_PARAM_add0_policy() (CVE-2023-0466)
* Fixed handling of invalid certificate policies in leaf certificates (CVE-2023-0465)
* Limited the number of nodes created in a policy tree (CVE-2023-0464)
Tony Ambardar [Mon, 17 May 2021 18:57:40 +0000 (11:57 -0700)]
kselftests-bpf: add kernel BPF tests
Build and package kernel self-tests used for BPF testing, program and JIT
development. This package, together with the existing 'kmod-bpf-test', was
extensively used for past upstream Linux JIT submissions [1].
Currently this includes only 'test_verifier'; building 'test_progs' will
fail due to known endian limitations with bpftool skeletons.
Tony Ambardar [Fri, 26 May 2023 08:41:18 +0000 (01:41 -0700)]
base-files: enable BPF JIT kallsyms by default
Set net.core.bpf_jit_kallsyms=1 in /etc/sysctl.d/10-default.conf.
For privileged users, this exports addresses of JIT-compiled programs to
appear in /proc/kallsyms when present, allowing their use for debugging
and in traces.
Tianling Shen [Tue, 30 May 2023 04:59:07 +0000 (12:59 +0800)]
rockchip: add Orange Pi R1 Plus LTS support
The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
identical to OrangePi R1 Plus.
Tianling Shen [Tue, 30 May 2023 04:59:07 +0000 (12:59 +0800)]
rockchip: add Orange Pi R1 Plus support
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.
This device is similar to the NanoPi R2S, and has a 16MB
SPI NOR (mx25l12805d). The reset button is changed to
directly reset the power supply, another detail is that
both network ports have independent MAC addresses.
Note: booting from SPI is currently unsupported, you have to install
the image on a SD card.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit ab641efe698f4412319fcbcfe6ffde64c929cd97)
[Removed patches for kernel 6.1] Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
generic: drop useless binfmt patch fixing compilation warning
The compilation warning was triggered by wrongly set FRAME_WARN to 1024
even for 64bit. This was recently fix by correctly setting the
FRAME_WARN to 2048 for 64bit systems.
The compilation warning would still be triggered on 32bit system but the
actual code is never reached as ARCH_USE_GNU_PROPERTY is only set on
arm64 arch.
Drop the patch as kmalloc cause perf regression as suggested by upstream
maintainers.
Fixes: fa79baf4a6e2 ("generic: copy backport, hack, pending patch and config from 5.15 to 6.1") Fixes: 5913ea1ba2fa ("generic: 5.15: add pending patch fixing binfmt compilation warning") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 62338f41625074640a4de9e26e5e67b010fe0ebe)
Jitao Lu [Sun, 4 Jun 2023 05:54:01 +0000 (13:54 +0800)]
oxnas: Enable CONFIG_CRYPTO_LZ4
Previously, CONFIG_LZ4_DECOMPRESS=y was selected by CONFIG_RD_LZ4 only.
When building kernel for initramfs, CONFIG_RD_LZ4 will be unset by
Kernel/SetInitramfs if the chosen compression method is not lz4, then
CONFIG_LZ4_DECOMPRESS will become a *module* in the newly generated
kernel config.
However, the newly added module won't be built after 38c150612cc9be488527e342db92d5c74093213f, so packaging kmod-lib-lz4
fails due to missing lz4_decompress.ko.
CONFIG_CRYPTO_LZ4=y makes CONFIG_LZ4_DECOMPRESS=y being selected w/o
CONFIG_RD_LZ4, so that the modules of the default kernel and initramfs
kernel are consistent.
Fixes: #12766 Fixes: 38c150612cc ("build: revert 54070a1 (all kernels are >= 5.10)") Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
(cherry picked from commit cc87f6629b8a120420075cd984a4e6ece6c669df)
Mikhail Zhilkin [Sat, 3 Jun 2023 08:37:54 +0000 (08:37 +0000)]
ramips: enable LED button for TP-Link EC330-G5u v1
The device already has LED push button (KEY_LIGHTS_TOGGLE)
and exported GPIO control "led-light". This commit adds
button handler script for switching on/off all device LEDs.
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit d955b41275eaf93b7600f8eb7d706f40302f26c2)
Tianling Shen [Thu, 1 Jun 2023 07:22:26 +0000 (15:22 +0800)]
openssl: fix uci config for built-in engines
Built-in engine configs are added in libopenssl-conf/install stage
already, postinst/add_engine_config is just duplicating them, and
due to the lack of `config` header it results a broken uci config:
> uci: Parse error (invalid command) at line 3, byte 0
Marek Behún [Wed, 12 Apr 2023 11:01:25 +0000 (13:01 +0200)]
kernel: Backport mvneta crash fix to 5.15
Backport Russell King's series [1]
net: mvneta: reduce size of TSO header allocation
to pending-5.15 to fix random crashes on Turris Omnia.
This also backports two patches that are dependencies to this series:
net: mvneta: Delete unused variable
net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit()
Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (squashed)
(cherry picked from commit 7b31c2e9ed4da7bfeecbd393c17c249eca870717)
Petr Štetiar [Wed, 29 Mar 2023 08:57:17 +0000 (10:57 +0200)]
netifd: update to version 2023-05-31
Contains following changes:
* bridge: bridge_dump_info: add dumping of bridge attributes
* bridge: make it more clear why the config was applied
* cmake: fix build by reordering the cflags definitions
* treewide: fix multiple compiler warnings
Jeffery To [Wed, 31 May 2023 13:58:34 +0000 (21:58 +0800)]
build: export GIT_CEILING_DIRECTORIES for package builds
A package may run git as part of its build process, and if the package
source code is not from a git checkout, then git may traverse up the
directory tree to find buildroot's repository directory (.git).
For instance, Poetry Core, a Python build backend, will read the
contents of .gitignore for paths to exclude when creating a Python
package. If it finds buildroot's .gitignore file, then Poetry Core will
exclude all of the package's files[1].
This exports GIT_CEILING_DIRECTORIES for both package and host builds so
that git will not traverse beyond $(BUILD_DIR)/$(BUILD_DIR_HOST).
Hauke Mehrtens [Tue, 30 May 2023 18:21:43 +0000 (20:21 +0200)]
kernel: Set CONFIG_FRAME_WARN depending on target
This set the CONFIG_FRAME_WARN option depending on some target settings.
It will use the default from the upstream kernel and not the hard coded
value of 1024 now.
Currently, e2600ac-c1 cannot be built as the kernel is larger than the defined KERNEL_SIZE,
however, there is no bootloader limit for the kernel size so remove KERNEL_SIZE completely.
Signed-off-by: 张 鹏 <sd20@qxwlan.com>
[ rename port to more generic name ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 0dca52cf595cedcabec5d384ddc83f1954cca46d)
Signed-off-by: 张 鹏 <sd20@qxwlan.com>
[ rename port to more generic name ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 7f2ecab0f4623e9b437b1a6656275695ac063fe4)
Petr Štetiar [Sat, 27 May 2023 08:31:58 +0000 (10:31 +0200)]
Revert "feeds: use git-src-full to allow Git versioning"
This partially reverts commit 7fae1e5677e9bb4979c8d4ac99be4de6955b13d0
as it should be no longer necessary to do a full clone since commit 48ed07bc0b94 ("treewide: replace AUTORELEASE with real PKG_RELEASE").
Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 11bb5337b8d8b5018e48f0df415efb99e2f49d0d)
[adjusted to 23.05] Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Shiji Yang [Sun, 21 May 2023 14:51:16 +0000 (22:51 +0800)]
ramips: correct page read return value of the mt7621 nand driver
read_page() need to return maximum number of bitflips instead of the
accumulated number. Change takes from upstream mt7621 u-boot [1].
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips
* corrected in any single ECC step, -EIO hw error
Stan Grishin [Sun, 28 May 2023 04:48:26 +0000 (04:48 +0000)]
base-files: x86 fix 01_leds Syntax error
Cezary Jackiewicz reported:
| Syntax error in line /etc/board.d/01_leds#L22 - missing "\"
Fixes: c191c2d46f00 ("x86: base-files add support for Sophos 135r3/135r3w") Reported-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Stan Grishin <stangri@melmac.ca>
(buffed up commit message) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 4b8b2f4f978d6df586dd7ce4dcc3e1286b93bd48)
Management Complex (MC) userspace support is required for userspace
helpers working with DPAA2 objects exported by the Management Complex BUS.
Without it, there is the error:
```
root@OpenWrt:/# ls-addni dpmac.1
error: Did not find a device file
Restool wrapper scripts only support the latest major MC version
that currently is MC10.x. Use with caution.
error: Did not find a device file
```
This patch fixes it.
Suggested-by: Alexandra Alth <alexandra@alth.de> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(cherry picked from commit d04d6a82da70f6b691409972ffd4503f339105b7)
Daniel Golle [Sat, 27 May 2023 20:03:40 +0000 (21:03 +0100)]
mediatek: sync MT7988 USXGMII with SDK driver
The USXGMII driver in SDK was heavily refactored, some bugs have been
fixed and it has switched to use phylink_pcs. Follow up with changes
in SDK driver and sync our on-top-of-mainline driver with the SDK
driver.
Daniel Golle [Sat, 27 May 2023 20:49:55 +0000 (21:49 +0100)]
mediatek: follow-up with renamed Build/bl2 and Build/bl31-uboot
Use renamed build step names for all boards which were not handled by
commit c620409d58 ("mediatek: filogic: add uboot build for mt7981")
and now breaking the build.
Fixes: c620409d58 ("mediatek: filogic: add uboot build for mt7981") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 037ce27244b52fe4c0e2bd15f4a16973c64df93f)
Flash instructions:
1. Attach UART, boot the stock firmware until
the message about failsafe mode appears.
2. Enter failsafe mode by pressing "f" and "Enter"
3. Type "mount_root", then run
"fw_setenv bootmenu_delay 3"
4. Back up all mtd partitions before flashing.
5. Reboot, U-Boot now presents a menu.
6. Connect to your PC via the Gigabit port of the router,
set a static ip on the ethernet interface of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
7. Select "Upgrade ATF BL2", then use this file:
openwrt-mediatek-filogic-qihoo_360t7-preloader.bin
8. Select "Upgrade ATF FIP", then use this file:
openwrt-mediatek-filogic-qihoo_360t7-bl31-uboot.fip
9. Download the initramfs image, and type "reset",
waiting for tftp recovery to complete.
a. After openwrt boots up, perform sysupgrade.
Note:
1. Since NMBM is disabled, we must back up all partitions.
2. Flash instructions is based on commit 28df7f7.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit dc2d4d73939c3d86a8e9d968c5c3462f92771bc6) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Chukun Pan [Fri, 28 Apr 2023 15:36:17 +0000 (23:36 +0800)]
uboot-mediatek: add Qihoo 360T7 support
The vendor uboot will verify firmware at boot.
So add a custom uboot build for this device.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit c51eb177308835f811ae43b17dde0ea962ed1df1) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Chukun Pan [Wed, 26 Apr 2023 15:28:31 +0000 (23:28 +0800)]
arm-trusted-firmware-mediatek: add build for MT7981 DDR3
Add new build option BOARD_QFN/BOARD_BGA.
This option is only useful for MT7981 device.
MT7981A/B: BOARD_BGA, MT7981C: BOARD_QFN.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 602cb4f3259cb676fcf6fa6c459d598df643653b) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Chukun Pan [Tue, 25 Apr 2023 15:06:20 +0000 (23:06 +0800)]
mediatek: filogic: add uboot build for mt7981
Rename previous uboot build to mt7986-*.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit c620409d58a29d49ceccf838e90e030610c06611) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
mediatek: mt7981: add reserved memory to support pstore
Add reserved memory for pstore/ramoops to device tree used by Linux
as well as U-Boot.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3eb354f999a3687f9ae547899b0f5ec2b10185ab) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 26 May 2023 12:49:02 +0000 (13:49 +0100)]
mediatek: cleanly backport and add fix for I2C driver
Pick accepted patches from upstream Linux tree instead of having to
maintain our slightly different downstream patches.
Import pending patch fixing I2C on MT7981 by making sure all clocks
are enabled before accessing I2C registers.
Nick Hainke [Tue, 23 May 2023 14:47:42 +0000 (16:47 +0200)]
ramips: mark patches accepted upstream
Add kernel tags to the patches that got accepted upstream.
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 2388b119de9279d7adaa525c7ba502fcae1fe187) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Use toolchain container for label workflow to skip downloading external
toolchain from openwrt servers.
Fixes: 0fe5776f4a79 ("CI: build: Add support to use container included external toolchain") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 66fd0aa6efac3690fdc46c94a4657faacf3070dd)
CI: don't add "" in target and subtarget for label workflow
Don't add "" in target and subtarget for label workflow from label
detection as it does cause problem in build workflow on container
target/subtarget matching.
Fixes: bf8187d5dc4d ("CI: use split target and subtarget in label workflow") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 1fa84354a963eb71eca9e67a1fc7f99a53016a5c)
Commit 1cb8cdb ("ci: use new buildbot worker images with Debian 11")
introduced new Git version with strict rules for owner of the git
directory.
To handle this and not cause major change, just move the parsing before
the change of ownership of the openwrt directory permitting the correct
run of git fetch command with the same user that did the repository
checkout.
Fixes: 1cb8cdb ("ci: use new buildbot worker images with Debian 11") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 0063e71d66766818fba286efe2a0ed8746c265e5)
Commit bf8187d5dc4d ("CI: use split target and subtarget in label
workflow") didn't correctly output subtarget resulting in calling with
an empty subtarget. Fix this and correctly output generated subtarget.
Fixes: bf8187d5dc4d ("CI: use split target and subtarget in label workflow") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 8aa5a860101cc3f8d35ca968746320495c4b469e)
CI: use split target and subtarget in label workflow
With eecc6e48117b ("CI: rework build workflow to have split target and
subtarget directly") target and subtarget are split in 2 different
variables. Label workflow were not aligned to this change and are
currently broken.
Fix them and correctly pass split target and subtarget.
Fixes: eecc6e48117b ("CI: rework build workflow to have split target and subtarget directly") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit bf8187d5dc4d4bbb23770955744bca1787f32ac0)
Robert Marko [Mon, 22 May 2023 21:42:13 +0000 (23:42 +0200)]
generic: filter out CONFIG_PAHOLE_HAS_SPLIT_BTF
CONFIG_PAHOLE_HAS_SPLIT_BTF should be runtime detected as it depends on
pahole being available on the host, so filter it out of configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 3591353f5143fc46e31f921484177a9d6f1089a2) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tony Ambardar [Sun, 21 May 2023 09:14:37 +0000 (02:14 -0700)]
bpftools: update, split off bpftool and libbpf packages
My original bpftools package made "variant" builds of bpftool and libbpf
as a convenience, since both used the same local kernel sources with the
same versioning. This is no longer the case, since the commit below
switched to using an out-of-tree build mirror hosting repos for each.
Replace bpftools with separate bpftool and libbpf packages, each simplified
and correctly versioned. Also fix the broken libbpf ABI introduced in the
same commit. Existing build .config files are not impacted.
Fixes: 00cbf6f6ab1d ("bpftools: update to standalone bpftools + libbpf, use the latest version") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit afe1bf11f2539f75e30ab3206891dbe6f8c43bd5) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Sam Shih [Sun, 19 Feb 2023 02:18:36 +0000 (10:18 +0800)]
mediatek: add basic mt7988 device tree support
This add basic device tree support for mediatek MT7988 SoC
Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit e3a681bab4b2c193704e76b8a6091e57f0fab14e)
Daniel Golle [Sun, 30 Apr 2023 16:13:33 +0000 (17:13 +0100)]
mediatek: filogic: add driver for Richtek RT5190A regulator
The Richtek RT5190A is used on the MT7988 reference board. Backport and
enable the driver on the filogic subtarget, so we can support cpufreq
on the MT7988 reference board.
Daniel Golle [Sun, 30 Apr 2023 16:41:22 +0000 (17:41 +0100)]
mediatek: add driver for built-in 2.5G Ethernet PHY
Add driver for the built-in 2.5G Ethernet PHY found in the MT7988 SoC.
To function the PHY also needs firmware files which have not yet been
published via linux-firmware.
Daniel Golle [Sun, 30 Apr 2023 13:32:03 +0000 (14:32 +0100)]
generic: mt7530: backport support for the MT7988 built-in switch
Backport commits adding support for the MT7988 built-in switch to the
mt7530 driver.
This change results in the Kconfig symbol NET_DSA_MT7530 to be extended
by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530)
and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in
switch of the MT7988 SoC).
Select NET_DSA_MT7530_MDIO for all targets previously selecting
NET_DSA_MT7530, with the exception of mediatek/filogic which also
selects NET_DSA_MT7530_MMIO.
Sam Shih [Sun, 19 Feb 2023 02:15:10 +0000 (10:15 +0800)]
mediatek: add mt7988 pinctrl driver support
This adds provisional pinctrl driver support for the MediaTek MT7988 SoC.
Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 9e6a7e808f2e9dd02733ccc41827940fb421091d)
Sam Shih [Sun, 19 Feb 2023 02:11:50 +0000 (10:11 +0800)]
mediatek: add mt7988 clock drivers support
This adds clock drivers for the MediaTek MT7988 SoC
Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit b33c1858767e5109913ac2195ec2b2b8ef0e726a)
Chukun Pan [Mon, 1 May 2023 15:20:28 +0000 (23:20 +0800)]
mediatek: mt7981: usb enable 3.0 by default
There is no reason to limit USB to 2.0 mode
by default, delete this limit.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit b2beb4c68849c804a8b9441f776a6918d433fb1e) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
projects / thirdparty / openwrt.git / log
