Add a backport patch of realtek ecc driver which has been accepted
upstream. It enables us to make use of devices with NAND that have
OOB size larger than 64 and utilize Realtek ECC engine in OpenWrt.
Daniel Golle [Wed, 4 Mar 2026 01:45:41 +0000 (01:45 +0000)]
uboot-mediatek: port RNG drivers and enable them
Port drivers for the hardware true random number generator found in
MediaTek SoCs and enable them for all boards.
This has the side-effect of U-Boot now providing '/chosen/kaslr-seed'
to Linux which is required to enabled KASLR.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 4 Mar 2026 01:18:08 +0000 (01:18 +0000)]
mediatek: replace downstream TRNGv2 driver
Replace the downstream mtk-rng-v2 driver which was acquires random bytes
from TF-A via SMC. A new approach is needed as TF-A for MT7986 has
changed and now requires to use SMC instead of directly accessing the
TRNG via MMIO. However, we can't know whether we are on old or new TF-A,
many devices (like the BananaPi BPi-R3) allow updating TF-A BL3 in the
field, so it may be of the old or new type, and the RNG driver will have
to figure it out somehow.
This currently means that MT7986 with newer TF-A has broken/non-working
HWRNG in Linux:
root@OpenWrt:~# hexdump -C /dev/hwrng
hexdump: /dev/hwrng: I/O error
Fix this by creating a new combined driver which replaces the previous
mtk-rng-v2 driver, and is able to auto-detect which convention to use
on MT7986.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
firmware: Add support for Airoha EN7581/AN7583 NPU variant firmware
Add support for Airoha EN7581/AN7583 NPU variant firmware present in
linux-firmware. The Airoha EN7581 NPU variant is to support devices
equipped with the MT7996 WiFi chip.
While at it also add an extra new line to follow pattern of double new line to
separate each firmware package.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Oliver Sedlbauer [Tue, 20 Jan 2026 12:54:12 +0000 (13:54 +0100)]
base-files: avoid rm error messages in failsafe_wait
The fs_wait_for_key function runs multiple background processes that all
try to delete the same temporary file ($keypress_wait) when they exit.
This creates a race condition where one process successfully deletes the
file while others fail with ENOENT.
Busybox rm only suppresses "file not found" errors during the initial lstat()
check, not during the actual unlink() call. This causes error messages in the
boot log even with rm -f:
rm: can't remove '/tmp/tmp.hKjPDH': No such file or directory
Fixed by redirecting stderr to /dev/null for rm calls in concurrent contexts.
This change does not affect functionality and only avoids confusing log
output during boot.
Valent Turkovic [Tue, 3 Mar 2026 21:18:52 +0000 (22:18 +0100)]
ipq40xx: re-enable MeshPoint.One target
The MeshPoint.One was disabled during the DSA migration with the
comment "Missing DSA Setup". However, this device inherits its
entire network configuration from 8dev Jalapeno via the
Device/8dev_jalapeno-common template, and shares the same DSA
network setup in 02_network.
The Jalapeno has been working with DSA since the migration. All
MeshPoint.One board support files (DTS, network config, LED config)
are already in place and reference the same QCA8072 switch
configuration as the Jalapeno.
Hardware: Qualcomm IPQ4018, QCA8072 switch, same as 8dev Jalapeno.
Tested: Built firmware from current main branch, boots and network
functions correctly.
Chester A. Unal [Mon, 9 Feb 2026 10:55:02 +0000 (12:55 +0200)]
uqmi: introduce devpath option
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
Chester A. Unal [Wed, 5 Mar 2025 06:04:58 +0000 (06:04 +0000)]
umbim: introduce devpath option
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
rtldsa_get_mib_desc() is always well defined and only looks into
the configuration structure. Drop it and use direct data assignment
where needed. While we are here drop all NULL checks because
mib_desc is never unset.
realtek: dsa: move mib_desc/mib_list to device specific source
The device specific mib descriptors are located in dsa.c and
rtldsa_get_mib_desc() selects the right decriptor for the caller
based on family_id from the private structure. That makes not
much sense and is not wanted
Move the descriptors into their corresponding files and link
them directly to the config structure. Simplify the selector
by directly returning the linked data.
KSZ DSA driver is the only thing in the kernel selecting DCB support
instead of depending on it if required.
So, it will enable DCB support without asking and we do not want the
kernel size increase, as well as current Layerscape ARMv8 build failure.
So, revert this until its fixed upstream or worked around.
Manually edit patches:
- 110-mbedtls-TLS-crypto-option-initial-port.patch
- 190-hostapd-Fix-hostapd-crash-if-setup-a-iface-with-.patch
- 191-hostapd-add-support-for-specifying-the-link-id-in-th.patch
- 220-indicate-features.patch
- 360-acs_retry.patch
-> Remove the extra check for -EBUSY (see below) because the code we
want to skip is now already guarded by:
https://git.w1.fi/cgit/hostap/commit/?id=af6473761f07ae4f13ef228dec618ca62faf6ef4
```
+ if (ret == -EBUSY)
+ goto fail;
```
- 341-mesh-ctrl-iface-channel-switch.patch
- 600-ubus_support.patch
- 601-ucode_support.patch
-> The patch had this and similar changes:
```
- if (os_strcmp(drv->first_bss->ifname, ifname) != 0) {
+ if (drv->first_bss->ifindex != ifi->ifi_index) {
```
Those changes should be unnecessary due to the commit:
https://git.w1.fi/cgit/hostap/commit/?id=2bf6d85963b9857b411b57cc7949e30ee2cb1216
- 780-Implement-APuP-Access-Point-Micro-Peering.patch
-> Needs adjustement because of Enhanced Privacy Protection (EPP):
https://git.w1.fi/cgit/hostap/commit/?id=1e13ee9c382a5d88c4bb0ffdfaf434fbb31123f3
Tested-By: Daniel Pawlik <pawlik.dan@gmail.com> Co-developed-by: Agustin Lorenzo <agustin.lorenzo@thinco.es> Link: https://github.com/openwrt/openwrt/pull/20912 Signed-off-by: Nick Hainke <vincent@systemli.org>
This access point is a ‘friend’ of the T56 supplied by Odido but with DDR3 RAM and with two Ethernet 2.5 (GPY211)
The flash procedure is similar to other Zyxel T56/EX5600/EX5601
If you need backup please use the T56 guide
Please refer to https://openwrt.org/inbox/toh/zyxel/wx5600-t0 for detailed flash informations
Specifications:
SOC: MT7986b
RAM: 512MB
Flash: 512 MB SPI NAND
Ports: 2 LAN 2.5Gbps (GPY211C)
WIFI: MT7976GN + MT7976AN
LED: 3 bicolor LED - 1 monocolor LED
Buttons: Reset and WPS
We can install all with U-boot and mtk_uartboot.
Load Uboot:
```
./mtk_uartboot -a -p ./mt7986-ram-ddr3-bl2.bin -s /dev/ttyUSB0 -f openwrt-mediatek-filogic-zyxel_wx5600-t0-ubootmod-bl31-uboot.fip
```
**WARNING: Please use a GBIT ethernet or force it on system**
**WARNING: Please use only LAN2 port in Uboot**
Press 0 on Bootmenu
```
mtd erase ubi
run ubi_format
bootmenu
```
Load and write BL2 and U-boot:
```
8
7
```
Load and write recovery and production
```
6
5
```
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu> Co-authored-by: Hal Martin <halmartin@gmail.com> Link: https://github.com/openwrt/openwrt/pull/18364 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This access point is a ‘friend’ of the T56 supplied by Odido but with DDR3 RAM and with two Ethernet 2.5 (GPY211)
The flash procedure is similar to other Zyxel T56/EX5600/EX5601
If you need backup please use the T56 guide
Please refer to https://openwrt.org/inbox/toh/zyxel/wx5600-t0 for detailed flash informations
We can install all with U-boot and mtk_uartboot.
Load Uboot:
```
./mtk_uartboot -a -p ./mt7986-ram-ddr3-bl2.bin -s /dev/ttyUSB0 -f openwrt-mediatek-filogic-zyxel_wx5600-t0-ubootmod-bl31-uboot.fip
```
**WARNING: Please use a GBIT ethernet or force it on system**
**WARNING: Please use only LAN2 port in Uboot**
Press 0 on Bootmenu
```
mtd erase ubi
run ubi_format
bootmenu
```
Load and write BL2 and U-boot:
```
8
7
```
Load and write recovery and production
```
6
5
```
Hannu Nyman [Sun, 1 Mar 2026 21:26:08 +0000 (23:26 +0200)]
config: add build config option to sign each .apk package
Add a build config option to sign each individual .apk package.
If individual .apk files are signed with the build key, they can be
installed with 'apk add' without '--allow-untrusted' to a firmware
compiled by the same buildhost.
Enable the option by default, but disable it for BUILDBOT.
(At the moment, since commit 084697e, only the package index is signed,
which forces users to use '--allow-untrusted' when installing
self-built .apk files.)
Add menuconfig options to include modules for (virtio) vsockets. These are
used when running as Guest OS in a VM.
OpenWRT can be run in a vm (mostly commonly on the x86/64 and armsr
targets). Often it is convenient to have some sort of guest agent running,
to ease communication from host to guest.
Virtual Sockets provide this communication channel.
Virtio is a transport for this communication channel.
Virtual Sockets over virtio are for example used by Incus.
Virtual Sockets in general are used by most hypervisors, including VMware,
Hyper-V, and libvirt (qemu). These may need other transport-specific
modules not included in this commit.
Felix Fietkau [Sat, 28 Feb 2026 11:19:04 +0000 (11:19 +0000)]
ucode: update to Git HEAD (2026-02-27)
d768823fea50 vm: rework I_DYNLOAD instruction to read module name from stack 9e265b9a1e15 program: support encoding export symbols in precompiled bytecode 926f20b55e13 compiler: add support for runtime module imports e3d7d77f0e5d lib: avoid stack operations if required code invoked exit() 7f3a0512f49d compiler: turn static imports of precompiled modules into dynamic loads ccc25285471b nl80211.h: update to version 6.18 bb145163147a nl80211: add WiFi 7 EHT and MLD attributes 65d268546453 nl80211: add scan, BSS status and BSS use-for constants
Fixes: https://github.com/jow-/ucode/issues/336#issuecomment-3415635374 Fixes: https://github.com/jow-/ucode/pull/338#issuecomment-3442569831 Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bevan Weiss [Tue, 6 Jan 2026 09:50:34 +0000 (20:50 +1100)]
kernel: mfd: Add Hasivo STC8 mfd
This STC8 microcontroller is used on a range of Hasivo managed switches.
It typically performs some fan/thermal control, and also has some
discrete IO hanging off of it.
The fan/thermal control is still somewhat unknown at this stage, but the
LED / gpio control has been determined as being two I2C registers which
need to be written to with a 'typical' Hasivo 0x40 execute mask set, to
change values.
Rather than having this expose the LED functionality / thermal control
directly, just represent it as an mfd, with some configurable OR'ing of
an execute-bit to certain registers (execute-bit-regs). This way different
STC8 arrangements can hopefully be handled by devicetree configs rather
than needing new driver code.
Ahmed Naseef [Thu, 26 Feb 2026 11:04:17 +0000 (15:04 +0400)]
econet: en7528: fix swapped WiFi eeprom references for DASAN H660GM-A
The 2.4 GHz and 5 GHz WiFi eeprom cell references were assigned to the
wrong PCIe slots. Swap them so slot0 (2.4 GHz) uses the eeprom at
0x1c0000 and slot1 (5 GHz) uses the eeprom at 0x40000. Fix the eeprom
cell lengths to match the sizes expected by their respective drivers.
Fixes: be24a13ad5b2 ("econet: en7528: add PCIe and WiFi support") Signed-off-by: Ahmed Naseef <naseefkm@gmail.com> Link: https://github.com/openwrt/openwrt/pull/22195 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Jonas Jelonek [Fri, 27 Feb 2026 23:24:29 +0000 (23:24 +0000)]
realtek: dts: drop SYS LED of XikeStor SKS8310-8X
The sys_led node in the device tree is wrong and doesn't work. On GPIO
23 nothing seems to be connected. The switch has a SYS LED but as with a
lot other Realtek switches, this LED is connected to the pin A0, which
can be driven as GPIO0 or system LED. The hardware-assisted behavior is
configured during boot by u-boot.
Though it is be possible to deactivate the hardware-assisted behavior
and give userspace control over the LED, it doesn't work for this
switch. XikeStor apparently decided to hook the SYS LED to some kind of
external watchdog. This one seems to expect a LOW signal on that line
periodically. This leaves room for two options:
1) keep behavior and let the LED blink as configured by u-boot
2) turn off LED completely
Option 2) is rather odd and may confuse users, thus it is better to keep
the behavior as-is for now. u-boot configures the LED to blink fast
which might be annoying. As soon as we have a way in the device tree to
specify different blinking frequencies as supported by the hardware,
this can be smoothened.
Jonas Jelonek [Fri, 27 Feb 2026 22:38:02 +0000 (22:38 +0000)]
realtek: dts: add monitor IC node for XikeStor SKS8310-8X
The XikeStor SKS8310-8X has a monitoring IC LM75B from National
Instruments on board. This was missed when support for the device was
added. Add it now and also add the corresponding kmod to the device
packages.
Fixes: 62d50fb196 ("realtek: add support for XikeStor SKS8310-8X") Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Link: https://github.com/openwrt/openwrt/pull/22211 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Jonas Jelonek [Fri, 27 Feb 2026 22:31:55 +0000 (22:31 +0000)]
realtek: use nvmem for mac address for XikeStor SKS8310-8X
Define an nvmem cell in the device tree of XikeStor SKS8310-8X to
reference that as a source for the MAC address of the switch (ports).
This eliminates the need for the userspace script to read and parse the
MAC address.
The driver covers phys and not ports. Adapt the iterator to
align with this naming convention. While we are here convert
some open coding to this iterator macro.
The mdio driver is about phys and not about the (dsa) port number
of the cpu. This was a generic alias when all of this was part
of a big large mdio/ethernet driver. Give the cpu_port variable
a new name that better fits to the mdio context.
In most drivers upstream use "ethernet-ports" instead of "ports"
in dts. Especially the upstream rtl9300 mdio driver uses this to
lookup the port/phy mapping. Do the same downstream. There is no
need to adapt the dsa driver because it scans the dts via
for_each_node_by_name(dn, "port").
Bevan Weiss [Wed, 25 Feb 2026 08:49:50 +0000 (19:49 +1100)]
packages: add PSE (PoE) packages
There are a number of pse chips already present in upstream Linux.
OpenWrt is starting to support a number of devices can contain various pse
chips. But having all the pse chip combinations defined at the target
level will result in bloat on images.
Present the current upstream Linux pse drivers as packages so that they
can be selectively included per board (rather than per target).
Signed-off-by: Bevan Weiss <bevan.weiss@gmail.com>
[Make it depend on REGULATOR_SUPPORT, and !SMALL_FLASH] Link: https://github.com/openwrt/openwrt/pull/22172 Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Fri, 27 Feb 2026 11:08:56 +0000 (12:08 +0100)]
targets: add REGULATOR_SUPPORT auto-feature
Not all targets need regulator support, so they dont enable it as its
disabled in the generic config by default.
So, in order to allow kernel modules to depend on regulator support lets
add a new feature flag "regulator" and set it automatically if target
kernel config enables CONFIG_REGULATOR.
Hauke Mehrtens [Thu, 26 Feb 2026 19:49:17 +0000 (20:49 +0100)]
lantiq: dm200: Fix loading PHY firmware
The device has 1 100MBit/s port. By default the PHY firmware is running
in 1GBit/s mode. The driver will try to load the 1GBit/s firmware and
fail if it is not there. Set the GPHY0 also to 100MBit/s mode.
The driver uses all nodes independent of the status attribute.
Do the same fix for AVM FRITZ!Box 7412 too.
Reported-by: Achelon in OpenWrt forum Fixes: https://github.com/openwrt/openwrt/issues/21836 Link: https://github.com/openwrt/openwrt/pull/22188 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Linus Lüssing [Wed, 28 Jan 2026 00:52:15 +0000 (01:52 +0100)]
realtek: remove currently unused VLAN profile_id 1
So far we are only associating and using a VLAN profile ID of 0 to any
VLAN ID, VLAN profile ID 1 is unused. Therefore we can safely remove its
initialization, just like we don't initialize any of VLAN profile IDs
2 to 7 on rtl83xx/rtl930x or 2 to 15 on rtl931x.
Linus Lüssing [Sat, 10 May 2025 13:38:49 +0000 (15:38 +0200)]
realtek: setup special portmasks only once
The special all-ports multicast portmasks table entry would be written
twice, redundantly as vlan_profile_setup() is called twice. Which is
unnecessary. Writing this reserved multicast portmask entry is
independent of a VLAN profile, therefore let's move this to a more
suitable position.
Bevan Weiss [Fri, 27 Feb 2026 22:39:54 +0000 (09:39 +1100)]
kernel: lift CONFIG_REGULATOR_VEXPRESS 'not set' to generic
Advertise the default 'not set' of this CONFIG higher in the tree since
it's already referenced by several other targets, with a few more targets
missing this reference (which fails build to prompt for N/y/m).
Make use of the new fast_age() helpers for the RTL83xx targets.
For this:
- split the existing rtldsa_83xx_fast_age() into two device
specific functions. This removes a family_id check.
- change the callbacks in the config structures
realtek: dsa: provide generic fast_age for RTL93xx
Fast ageing of L2 entries is supported by DSA with two callbacks.
- port_fast_age(): age out for one port
- port_vlan_fast_age(): age out for one vlan on one port
Independent from the SoC it always boils down to issue a command
to the L2_TBL_FLUSH_CTRL register. Nevertheless the current
implemententation is repeated multiple times and makes use of
the family_id.
As a first refactoring step provide generic fast_age() functions
for RTL930x and RTL931x by rearranging the existing definitions
of vlan_port_fast_age().
The logic is as follows:
- provide a SoC dependent function that works with or without VLAN.
When VLAN/VID = -1 only flush the specific port otherwise only
flush given VLAN on port.
- provide a port_fast_age() helper that calls the SoC specific
functions with VLAN = -1.
- provide a port_vlan_fast_age() helper that calls the SOC specific
functions and handing over the given VLAN.
rteth_hw_receive() already has a loop that checks how much work
may be done. No need to repeat that in the caller too. While we
are here adapt the function prefix.
realtek: eth: be defensive in rteth_confirm_and_disable_irqs()
With latest refactoring irq activation and deactivation is side-by-side
in the code. This makes it easier to align these functions. Current
assumption is, that the ethernet irq is only called on one cpu and
napi handling does not interfere. So it should be totally fine to
run irq disabling (called from interrupt handler) without locks.
Nevertheless be defensive and add a lock(). So in the case the ethernet
irq is fired twice on two cpus (e.g. RTL931x) the code is on the
safe side.
Once again there is a family_id check. This time around the irq
reactivation in the receive path. For cleanup and better readability
add a helper directly besides its already existing counterpart
rteth_confirm_and_disable_irqs(). With that drop unneeded defines.
Compared to ralink,mtd-eeprom , the nvmewm binding ends up byteswapping
the data on big endian hosts. Meaning on big endian, the nvmwem binding
is equivalent to:
ralink,mtd-eeprom +
ralink,eeprom-wrap
Revert as a result since there's no eeprom-swap here.
Robert Marko [Fri, 27 Feb 2026 10:09:00 +0000 (11:09 +0100)]
generic: add CONFIG_REGULATOR_QCOM_USB_VBUS
CONFIG_REGULATOR_QCOM_USB_VBUS showed up on Layerscape recently, and it
looks like multiple targets disable it manually, so simply disable it in
generic configuration instead.
Hauke Mehrtens [Wed, 25 Feb 2026 00:26:02 +0000 (01:26 +0100)]
mac80211: activate BRCMFMAC_SDIO on x86
Activate the option BRCMFMAC_SDIO by default on x86 too. x86 already
compiles MMC support into the kernel. This will just compile brcmfmac
with MMC support.
Hauke Mehrtens [Wed, 25 Feb 2026 23:41:11 +0000 (00:41 +0100)]
wifi-scripts: fix handling of 64 character WPA key
The key variable is not defined in the scope when setting wpa_psk. Use
config.key instead.
This fixes configuration the 64 characters wpa_psk directly.
Hauke Mehrtens [Wed, 25 Feb 2026 21:42:56 +0000 (22:42 +0100)]
ramips: mt7621: fix network configuration
The configuration for the dlink,dir-1360-a1 also changed the settings
for the devices defined on top of it. "lan1 lan2 lan3 lan4" "wan" is
the default configuration, no need to add it here.
Fixes: 7a8e2efed587 ("ramips: add support for D-Link DIR-1360 A1") Reported-by: schmars in IRC Link: https://github.com/openwrt/openwrt/pull/22179 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Sander Vanheule [Sat, 21 Feb 2026 14:00:39 +0000 (15:00 +0100)]
realtek: hog the GS1900-24E external IC reset line
The GPIO line connecting to the reset signals of the GS1900-24E(A1)'s
external ICs (RTL8218B phys and RTL8231 expander) cannot be asserted by
the MDIO subsystem, as the reset is shared between busses.
To prevent users from accidentally asserting the reset line, a GPIO hog
is created to permanently de-assert the signal, reliably keeping the
phys and GPIO expanders on.
Tested-by: Simon Fischer <simi.fischa@gmail.com> Signed-off-by: Sander Vanheule <sander@svanheule.net>
Sander Vanheule [Sat, 21 Feb 2026 13:44:23 +0000 (14:44 +0100)]
realtek: rtl838x: drop GS1900 MDIO reset GPIO
The reset line wired to the RTL8231 on the GS1900 series may also
connect to other external ICs on the board. On the GS1900-24E, the
reset line is wired (via buffers) to the board's RTL8231 expanders and
the RTL8218 phys. As these external devices (phys) are on different
busses, the reset line shouldn't be specified on one bus or the other.
Drop the reset specification from the generic GPIO description, so it
can be added back on a per-device basis after confirming the behavior.
Hauke Mehrtens [Sun, 22 Feb 2026 22:11:47 +0000 (23:11 +0100)]
wireless-regdb: update to version 2026.02.04
75bedc5 wireless-regdb: Update regulatory info for Australia (AU) for 2025 a6e5195 wireless-regdb: Update broken link in regulatory.bin(5) manpage 9e8c67f wireless-regdb: Update regulatory info for Malaysia (MY) for 2024 61a4637 wireless-regdb: Update regulatory info for Malaysia (MY) for 2025 5cefe55 wireless-regdb: Update regulatory info for Tunisia (TN) on 6GHz for 2025 1a729ae wireless-regdb: Update regulatory info for Canada (CA) for 2025 ea20dfa wireless-regdb: update regulatory database based on preceding changes
Jonas Lochmann [Mon, 16 Feb 2026 00:00:00 +0000 (01:00 +0100)]
iproute2: include upstream patch for musl libc
Due to a missing include, the constant UINT_MAX is undefined. This
fixes issues when building v25.12.0-rc5. Including a newer version of
iproute2 would include the patch, but causes other building issues.
Tested-by: Arif Rahman Hakim <arif2785id@gmail.com> Signed-off-by: Ahmed Naseef <naseefkm@gmail.com> Link: https://github.com/openwrt/openwrt/pull/22095 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
mt7620: workaround jal imm26 and redundant PAGE_ALIGN
On MT7620-class platforms (CONFIG_NET_RALINK_MT7620) we observe sporadic
wrong-jump-targets, kernel oopses, hanging, corrupted backtraces or even
"half-written" instructions when the compiler emits a direct 'jal imm26'
call.
This is triggered in:
- the small random helpers inside get_random_u32_below(), and
- the blkcg_maybe_throttle_current() call in resume_user_mode_work().
This patch forces those two call sites to use an indirect call via
a volatile function pointer (load into register + jalr) when building
for MT7620, avoiding embedding a 26-bit immediate jump target.
Additionally, on MT7620 builds the exec path in fs/exec.c is modified:
- skip arch_align_stack() + PAGE_ALIGN() in setup_arg_pages()
because the micro-randomization (< PAGE_SIZE) implemented by many
ports (including MT7620) is negated immediately by PAGE_ALIGN().
Skipping the redundant PAGE_ALIGN() reduces exposure to the
problematic code pattern.
These changes are targeted workarounds for MT7620; behavioral logic is unchanged.
Tim Harvey [Fri, 20 Feb 2026 01:01:48 +0000 (17:01 -0800)]
imx: cortexa53: remove KSZ9477 static driver
The KSZ9477 driver was added to the cortexa53 kernel to support the
Gateworks Venice product family which has a board with this switch. Now
that the kmod-dsa-ksz9477 driver is available as a package remove the
static configuration ad add the package.
This resolves an issue caused by having the switch driver static and the
PHY driver as a module such that the PHY driver was not registered early
enough to be used causing some errata to not be worked around.
The makefile recipe is wrong and a module compilation tries
to build each object individually. Fix that. This allows to
build the dsa driver as a module.
Suggested-by: Balázs Triszka <info@balika011.hu> Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Link: https://github.com/openwrt/openwrt/pull/22121 Signed-off-by: Robert Marko <robimarko@gmail.com>
The ethernet driver has a hard link to the dsa driver. Especially
the setup_tc() function must be available when the driver loads.
Decouple it by using a dsa callback recipe.
Suggested-by: Balázs Triszka <info@balika011.hu> Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Link: https://github.com/openwrt/openwrt/pull/22121 Signed-off-by: Robert Marko <robimarko@gmail.com>
We do not want to rely on the soc_info structure. But at the moment
it is still referenced in several places. Add an EXPORT() to it.
So drivers that need access to this structure can be build as modules.
Suggested-by: Balázs Triszka <info@balika011.hu> Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Link: https://github.com/openwrt/openwrt/pull/22121 Signed-off-by: Robert Marko <robimarko@gmail.com>
Eicke Herbertz [Sat, 21 Feb 2026 16:35:54 +0000 (17:35 +0100)]
ath79: remove kmod-ath9k and wpad from Mikrotik RB750r2
The RB750r2 (HEXLite) does not have wifi and those packages bloat the image
by a significant amount. When building a custom image with WireGuard and
booting that from initramfs, there wasn't enough space left in tmpfs to
upload and flash the squashfs image. Investigating what packages I could
remove, I discovered these unneeded ones.
projects / thirdparty / openwrt.git / log
