Joshua Colp [Tue, 19 Feb 2008 21:38:39 +0000 (21:38 +0000)]
Only output a log message saying the format does not exist if it actually does not exist, not if the file itself could not be opened.
(closes issue #11828)
Reported by: IgorG
Patches:
readfile.v1.diff uploaded by IgorG (license 20)
Joshua Colp [Tue, 19 Feb 2008 19:27:50 +0000 (19:27 +0000)]
len already contains the position we want to examine, if we move one left again we'll actually probably be looking at a digit.
(issue #12030)
Reported by: alligosh
Joshua Colp [Tue, 19 Feb 2008 18:40:22 +0000 (18:40 +0000)]
Add CHANNELREDIRECT_STATUS variable to ChannelRedirect() dialplan application. This will either be set to NOCHANNEL if the given channel was not found or SUCCESS if it worked.
(closes issue #11553)
Reported by: johan
Patches:
UPGRADE.txt.channelredirect.patch uploaded by johan (license 334)
CHANGES.channelredirect.patch uploaded by johan (license 334)
app_channelredirect-20080219.patch uploaded by johan (license 334)
Jeff Peeler [Tue, 19 Feb 2008 18:14:56 +0000 (18:14 +0000)]
(closes issue #11864)
Reported by: julianjm
Patches:
chan_zap.c-1.4-devicestate-v1.diff uploaded by julianjm (license 99)
Patch fixes problem of device state incorrectly reporting idle before PBX answers incoming call on FXO channel. Device status is updated now during new channel creation.
Ensure that emulated DTMFs do not get interrupted by another begin frame.
(closes issue #11740)
Reported by: gserra
Patches:
v1-11740.patch uploaded by dimas (license 88)
(closes issue #11955)
Reported by: tsearle
(closes issue #10530)
Reported by: xmarksthespot
Joshua Colp [Mon, 18 Feb 2008 23:47:01 +0000 (23:47 +0000)]
Add a non-invasive API for application level manipulation of T38 on a channel. This uses control frames (so they can even pass across IAX2) to negotiate T38 and provided a way of getting the current status of T38 using queryoption. This should by no means cause any issues and if it does I will take responsibility for it.
(closes issue #11873)
Reported by: dimas
Patches:
v4-t38-api.patch uploaded by dimas (license 88)
There was an invalid assumption when calculating the duration of a file that the filestream in question
was created properly. Unfortunately this led to a segfault in the situation where an unknown format was
specified in voicemail.conf and a voicemail was recorded. Now, we first check to be sure that the stream
was written correctly or else assume a zero duration.
When a SIP channel is being auto-destroyed, it's possible for it to still be
in bridge code. When that happens, we crash. Delay the RTP destruction until
the bridge is ended.
(closes issue #11960)
Reported by: norman
Patches:
20080215__bug11960__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: norman
Joshua Colp [Mon, 18 Feb 2008 15:47:00 +0000 (15:47 +0000)]
Add an API call (ast_async_parseable_goto) which parses a goto string and does an async goto instead of an explicit goto.
(closes issue #11753)
Reported by: johan
Russell Bryant [Fri, 15 Feb 2008 23:14:32 +0000 (23:14 +0000)]
Fix a regression in Asterisk 1.6 related to the use of AES encryption.
1024 was used instead of 128 when using AES from OpenSSL. Many thanks
to d1mas for figuring this one out!
Russell Bryant [Fri, 15 Feb 2008 19:50:47 +0000 (19:50 +0000)]
Merged revisions 103728 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103728 | russell | 2008-02-15 13:50:11 -0600 (Fri, 15 Feb 2008) | 4 lines
In the case that you try to directly reload a module has returned
AST_MODULE_LOAD_DECLINE, log a message indicating that the module is not fully
initialized and must be initialized using "module load".
Russell Bryant [Fri, 15 Feb 2008 18:34:42 +0000 (18:34 +0000)]
Merged revisions 103726 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103726 | russell | 2008-02-15 12:33:29 -0600 (Fri, 15 Feb 2008) | 6 lines
Don't attempt to execute the reload callback for a module that returned
AST_MODULE_LOAD_DECLINE. This fixes a crash that was reported against
chan_console in trunk.
(closes issue #11953, reported by junky, fixed by me)
Final round of changes for configure script logic for IMAP
Now if a directory is specified, then we will search that directory for
a source installation of the IMAP toolkit. If none is found, then we will
use that directory as the basis for detecting a package installation of
the IMAP c-client. If that check fails, then configure will fail.
Fix a bit of wrong logic in the configure script that caused problems when trying to configure
without IMAP. Patch suggestion from phsultan, but I modified it slightly.
I apparently misunderstood one of the requirements of this configure change.
Now, if a source directory is specified with the --with-imap option, and a valid
source installation is not detected there, then configure will fail and will not
check for a package installation.
Mark Michelson [Thu, 14 Feb 2008 23:39:47 +0000 (23:39 +0000)]
See commit message for svn revision 103698. This behavior is the same as what is described
there. The difference is that trunk already had the --with-imap=system option, but it only
checked the include path for headers in the imap directory and not also the c-client directory.
Change to the configure logic regarding IMAP. Prior to this commit, if you wished to configure
Asterisk with IMAP support, you would use the --with-imap configure switch in one of the following
two ways:
--with-imap=/some/directory would look in the directory specified for a UW IMAP source installation
--with-imap would assume that you had imap-2004g installed in .. relative to the Asterisk source
With this set of changes the two above options still work the same, but there are two new behaviors, too.
--with-imap=system will assume that you have -libc-client.so where you store your shared objects and will
attempt to find c-client headers in your include path either in the imap or c-client directory.
If either of the two original methods of specifying the imap option should fail, then the check for --with-imap
=system will be performed in addition. It is only after this "system" check that failure can happen.
Jason Parker [Thu, 14 Feb 2008 21:21:53 +0000 (21:21 +0000)]
Modify ldap autoconf function, so that an incorrect ldap library is not found on Solaris (it is incompatible).
Also removes second check for awk, which causes Solaris to find an incompatible version of awk.
Mark Michelson [Thu, 14 Feb 2008 20:46:00 +0000 (20:46 +0000)]
Change the queue holdtime announcement to happen at any interval (not just greater than two minutes). Remove
the saying of less-than for holdtime announcements since it can lead to awkward holdtime announcements. Using
'1' as a queue-round-seconds value is no longer valid.
Mark Michelson [Wed, 13 Feb 2008 00:55:09 +0000 (00:55 +0000)]
Fix a small logic error in ast_event_iterator_next. The previous logic allowed for the iterator
to indicate there was more data than there really was, causing the iterator read beyond the end
of the event structure. This led to invalid memory reads and potential crashes.
Refuse to load app_voicemail if res_adsi is not loaded (which is a symbol dependency)
(closes issue #11760)
Reported by: non-poster
Patches:
20080114__bug11760.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, non-poster, jamesgolovich
Jeff Peeler [Tue, 12 Feb 2008 00:24:36 +0000 (00:24 +0000)]
Requested changes from Pari, reviewed by Russell.
Added ability to retrieve list of categories in a config file.
Added ability to retrieve the content of a particular category.
Added ability to empty a context.
Created new action to create a new file.
Updated delete action to allow deletion by line number with respect to category.
Added new action insert to add new variable to category at specified line.
Updated action newcat to allow new category to be inserted in file above another existing category.
If entering a conference with the 'w' option ensure that we can't listen or speak until the marked user appears.
(closes issue #11835)
Reported by: alanmcmillan
Joshua Colp [Mon, 11 Feb 2008 16:17:15 +0000 (16:17 +0000)]
Add support for allowing a native bridge to happen when the L option is enabled. The RTP bridging could already handle this, it just needed to be enabled in the main bridging code.
(issue #10647)
Reported by: samdell3
Mark Michelson [Mon, 11 Feb 2008 02:47:25 +0000 (02:47 +0000)]
Fix a problem regarding network vs. host byte order
in the event API.
ast_event_iterator_get_ie_type should return the ie type in
host byte order. Furthermore, ast_event_get_ie_raw should already
have its ie type argument in host byte order since it could be called
externally (and it in fact is called in this way by ast_event_get_cached).
Commit fix for being unable to send voicemail from VoiceMailMain
Reported by: William F Acker (via the -users mailing list)
Patch by: Corydon76 (license 14)
Russell Bryant [Fri, 8 Feb 2008 21:26:32 +0000 (21:26 +0000)]
Merge changes from team/mvanbaak/cli-command-audit
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Russell Bryant [Fri, 8 Feb 2008 16:49:19 +0000 (16:49 +0000)]
At the request of ManxPower, include the UPGRADE.txt from 1.2 and 1.4, as well.
This way, if people need to go back and review what was deprecated in previous
major releases, it is readily available to them. Thanks for the suggestion!
Joshua Colp [Fri, 8 Feb 2008 15:31:00 +0000 (15:31 +0000)]
Fix a network byte order issue and ensure when creating an outgoing dialog that the socket always contains information such as type and port.
(closes issue #11916)
Reported by: mnnojd
Mark Michelson [Thu, 7 Feb 2008 21:37:00 +0000 (21:37 +0000)]
This is a combination new feature/bug fix for app_chanspy.
New feature: Add the 'e' option, which takes as an argument a list of
interfaces separated by colons. This way, you will only be able to spy
on this limited list of interfaces.
Bug fix: change some pointer checks to ast_strlen_zero so that spying
would work properly even if no channel was specified as the first argument
to chanspy.
Terry Wilson [Wed, 6 Feb 2008 16:23:22 +0000 (16:23 +0000)]
Add REALTIME_STORE and REALTIME_DESTROY dialplan functions provided by sergee.
I just added the ability to set multiple fields at once after discussions with
Tilghman and Russell. Currently limited to 30 fields.
projects / thirdparty / asterisk.git / log
