Rubén Justo [Sun, 26 Mar 2023 22:33:27 +0000 (00:33 +0200)]
branch: rename orphan branches in any worktree
In cfaff3aac (branch -m: allow renaming a yet-unborn branch, 2020-12-13)
we added support for renaming an orphan branch when that branch is
checked out in the current worktree.
Let's also allow renaming an orphan branch checked out in a worktree
different than the current one.
Signed-off-by: Rubén Justo <rjusto@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rubén Justo [Sun, 26 Mar 2023 22:33:17 +0000 (00:33 +0200)]
branch: description for orphan branch errors
In bcfc82bd48 (branch: description for non-existent branch errors,
2022-10-08) we checked the HEAD in the current worktree to detect if the
branch to operate with is an orphan branch, so as to avoid the confusing
error: "No branch named...".
If we are asked to operate with an orphan branch in a different working
tree than the current one, we need to check the HEAD in that different
working tree.
Let's extend the check we did in bcfc82bd48, to check the HEADs in all
worktrees linked to the current repository, using the helper introduced
in 31ad6b61bd (branch: add branch_checked_out() helper, 2022-06-15).
The helper, branch_checked_out(), does its work obtaining internally a
list of worktrees linked to the current repository. Obtaining that list
is not a lightweight work because it implies disk access.
In copy_or_rename_branch() we already have a list of worktrees. Let's
use that already obtained list, and avoid using here the helper.
Signed-off-by: Rubén Justo <rjusto@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rubén Justo [Sun, 26 Mar 2023 22:33:09 +0000 (00:33 +0200)]
branch: use get_worktrees() in copy_or_rename_branch()
Obtaining the list of worktrees, using get_worktrees(), is not a
lightweight operation, because it involves reading from disk.
Let's stop calling get_worktrees() in reject_rebase_or_bisect_branch()
and in replace_each_worktree_head_symref(). Make them receive the list
of worktrees from their only caller, copy_or_rename_branch().
Signed-off-by: Rubén Justo <rjusto@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rubén Justo [Sun, 26 Mar 2023 22:33:02 +0000 (00:33 +0200)]
branch: test for failures while renaming branches
When we introduced replace_each_worktree_head_symref() in 70999e9cec
(branch -m: update all per-worktree HEADs, 2016-03-27), we implemented a
best effort approach.
If we are asked to rename a branch that is simultaneously checked out in
multiple worktrees, we try to update all of those worktrees. If we fail
updating any of them, we die() as a signal that something has gone
wrong. However, at this point, the branch ref has already been renamed
and also updated the HEADs of the successfully updated worktrees.
Despite returning an error, we do not try to rollback those changes.
Let's add a test to notice if we change this behavior in the future.
In next commits we will change replace_each_worktree_head_symref() to
work more closely with its only caller, copy_or_rename_branch(). Let's
move the former closer to its caller, to facilitate those changes.
Signed-off-by: Rubén Justo <rjusto@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Henrie [Sun, 26 Mar 2023 03:06:36 +0000 (21:06 -0600)]
rebase: add a config option for --rebase-merges
The purpose of the new option is to accommodate users who would like
--rebase-merges to be on by default and to facilitate turning on
--rebase-merges by default without configuration in a future version of
Git.
Name the new option rebase.rebaseMerges, even though it is a little
redundant, for consistency with the name of the command line option and
to be clear when scrolling through values in the [rebase] section of
.gitconfig.
Support setting rebase.rebaseMerges to the nonspecific value "true" for
users who don't need to or don't want to learn about the difference
between rebase-cousins and no-rebase-cousins.
Make --rebase-merges without an argument on the command line override
any value of rebase.rebaseMerges in the configuration, for consistency
with other command line flags with optional arguments that have an
associated config option.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Henrie [Sun, 26 Mar 2023 03:06:35 +0000 (21:06 -0600)]
rebase: deprecate --rebase-merges=""
The unusual syntax --rebase-merges="" (that is, --rebase-merges with an
empty string argument) has been an undocumented synonym of
--rebase-merges without an argument. Deprecate that syntax to avoid
confusion when a rebase.rebaseMerges config option is introduced, where
rebase.rebaseMerges="" will be equivalent to --no-rebase-merges.
It is not likely that anyone is actually using this syntax, but just in
case, deprecate the empty string argument instead of dropping support
for it immediately.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Henrie [Sun, 26 Mar 2023 03:06:34 +0000 (21:06 -0600)]
rebase: add documentation and test for --no-rebase-merges
As far as I can tell, --no-rebase-merges has always worked, but has
never been documented. It is especially important to document it before
a rebase.rebaseMerges option is introduced so that users know how to
override the config option on the command line. It's also important to
clarify that --rebase-merges without an argument is not the same as
--no-rebase-merges and not passing --rebase-merges is not the same as
passing --rebase-merges=no-rebase-cousins.
A test case is necessary to make sure that --no-rebase-merges keeps
working after its code is refactored in the following patches of this
series. The test case is a little contrived: It's unlikely that a user
would type both --rebase-merges and --no-rebase-merges at the same time.
However, if an alias is defined which includes --rebase-merges, the user
might decide to add --no-rebase-merges to countermand that part of the
alias but leave alone other flags set by the alias.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 25 Mar 2023 12:16:32 +0000 (13:16 +0100)]
t5000: use check_mtime()
fd2da4b1ea (archive: add --mtime, 2023-02-18) added a helper function
for checking the file modification time of an extracted entry. Use it
for the older mtime test as well to shorten the code and piggyback on
the archive extraction done to validate file contents.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Fri, 24 Mar 2023 22:27:11 +0000 (23:27 +0100)]
archive: improve support for running in subdirectory
When git archive is started in a subdirectory, it archives its
corresponding tree and its child objects, only. That is intended. It
does that by effectively cd'ing into that tree and setting "prefix" to
the empty string.
This has unfortunate consequences, though: Attributes are anchored at
the root of the repository and git archive still applies them to
subtrees, causing mismatches. And when checking pathspecs it cannot
tell the difference between one that doesn't match anthing or one that
matches some actual blob outside of the subdirectory, leading to a
confusing error message.
Fix that by keeping the "prefix" value and passing it to pathspec and
attribute functions, and shortening it using relative_path() for paths
written to the archive and (if --verbose is given) to stdout.
Still reject attempts to archive files outside the current directory,
but print a more specific error in that case. Recognizing it requires a
full traversal of the subtree for each pathspec, however. Allowing them
would be easier, but archive entry paths starting with "../" can be
problematic to extract -- e.g. bsdtar skips them by default.
Reported-by: Cristian Le <cristian.le@mpsd.mpg.de> Reported-by: Matthias Görgens <matthias.goergens@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Fri, 24 Mar 2023 17:08:00 +0000 (10:08 -0700)]
blame: allow --contents to work with non-HEAD commit
The --contents option can be used with git blame to blame the file as if
it had the contents from the specified file. This is akin to copying the
contents into the working tree and then running git blame. This option
has been supported since 1cfe77333f27 ("git-blame: no rev means start
from the working tree file.")
The --contents option always blames the file as if it was based on the
current HEAD commit. If you try to pass a revision while using
--contents, you get the following error:
fatal: cannot use --contents with final commit object name
This is because the blame process generates a fake working tree commit
which always uses the HEAD object as its sole parent.
Enhance fake_working_tree_commit to take the object ID to use for the
parent instead of always using the HEAD object. Then, always generate a
fake commit when we have contents provided, even if we have a final
object. Remove the check to disallow --contents and a final revision.
Note that the behavior of generating a fake working commit is still
skipped when a revision is provided but --contents is not provided.
Generating such a commit in that case would combine the currently
checked out file contents with the provided revision, which breaks
normal blame behavior and produces unexpected results.
This enables use of --contents with an arbitrary revision, rather than
forcing the use of the local HEAD commit. This makes the --contents
option significantly more flexible, as it is no longer required to check
out the working tree to the desired commit before using --contents.
Reword the documentation so that its clear that --contents can be used
with <rev>.
Add tests for the --contents option to the annotate-tests.sh test
script.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 23 Mar 2023 20:40:47 +0000 (16:40 -0400)]
pack-redundant: escalate deprecation warning to an error
In c3b58472be2 (pack-redundant: gauge the usage before proposing its
removal, 2020-08-25), we added a big, ugly warning when pack-redundant
is run. The plan there indicated that we would ratchet that up to an
error before finally removing it. Since it has been 2.5 years (and 9
releases) since then, let's continue with the plan.
Note that we did get one bite on the warning, which was somebody asking
about alternatives:
but we didn't undo the ugly warning (and the advice continues to be "use
repack -d" instead).
There was also some discussion around the time of the deprecation that
pack-redundant was invoked by the bitbake tool, and it still seems to do
so now:
https://git.openembedded.org/bitbake
That use should probably just go away in favor of an occasional repack
(which probably even happens via auto-gc after fetch these days).
But since neither of those data points caused us to cancel the
deprecation plan by dropping the warning, it seems like we should
proceed with the next step.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: add support for different sslcert and sslkey types.
Basically git work with default curl ssl type - PEM. But for support
eTokens like SafeNet tokens via pksc11 need setup 'ENG' as sslcert type
and as sslkey type. So there added additional options for http to make
that possible.
Signed-off-by: Stanislav Malishevskiy <stanislav.malishevskiy@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mathias Krause [Thu, 23 Mar 2023 17:25:39 +0000 (18:25 +0100)]
grep: work around UTF-8 related JIT bug in PCRE2 <= 10.34
Stephane is reporting[1] a regression introduced in git v2.40.0 that leads
to 'git grep' segfaulting in his CI pipeline. It turns out, he's using an
older version of libpcre2 that triggers a wild pointer dereference in
the generated JIT code that was fixed in PCRE2 10.35.
Instead of completely disabling the JIT compiler for the buggy version,
just mask out the Unicode property handling as we used to do prior to
commit acabd2048ee0 ("grep: correctly identify utf-8 characters with
\{b,w} in -P").
Jeff King [Tue, 18 Oct 2022 20:15:33 +0000 (16:15 -0400)]
Makefile: force -O0 when compiling with SANITIZE=leak
Cherry pick commit d3775de0 (Makefile: force -O0 when compiling with
SANITIZE=leak, 2022-10-18), as otherwise the leak checker at GitHub
Actions CI seems to fail with a false positive.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Wed, 22 Mar 2023 17:43:22 +0000 (13:43 -0400)]
fast-export: drop unused parameter from anonymize_commit_message()
As the comment above the function indicates, we do not bother actually
storing commit messages in our anonymization map. But we still take the
message as a parameter, and just ignore it. Let's stop doing that, which
will make -Wunused-parameter happier.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Mar 2023 17:42:51 +0000 (13:42 -0400)]
fast-export: drop data parameter from anonymous generators
The anonymization code has a specific generator callback for each type
of data (e.g., one for paths, one for oids, and so on). These all take a
"data" parameter, but none of them use it for anything. Which is not
surprising, as the point is to generate a new name independent of any
input, and each function keeps its own static counter.
We added the extra pointer in d5bf91fde44 (fast-export: add a "data"
callback parameter to anonymize_str(), 2020-06-23) to handle
--anonymize-map parsing, but that turned out to be awkward itself, and
was recently dropped.
So let's get rid of this "data" parameter that nobody is using, both
from the generators and from anonymize_str() which plumbed it through.
This simplifies the code, and makes -Wunused-parameter happier.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we handle an --anonymize-map option, we parse the orig/anon pair,
and then feed the "orig" string to anonymize_str(), along with a
generator function that duplicates the "anon" string to be cached in the
map.
This works, because anonymize_str() says "ah, there is no mapping yet
for orig; I'll add one from the generator". But there are some
downsides:
1. It's a bit too clever, as it's not obvious what the code is trying
to do or why it works.
2. It requires allowing generator functions to take an extra void
pointer, which is not something any of the normal callers of
anonymize_str() want.
3. It does the wrong thing if the same token is provided twice.
When there are conflicting options, like:
we usually let the second one override the first. But by using
anonymize_str(), which has first-one-wins logic, we do the
opposite.
So instead of relying on anonymize_str(), let's directly add the entry
ourselves. We can tweak the tests to show that we handle overridden
options correctly now.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Mar 2023 17:40:51 +0000 (13:40 -0400)]
fast-export: factor out anonymized_entry creation
When anonymizing output, there's only one spot where we generate new
entries to add to our hashmap: when anonymize_str() doesn't find an
entry, we use the generate() callback to make one and add it. Let's pull
that into its own function in preparation for another caller.
Note that we'll add one extra feature. In anonymize_str(), we know that
we won't find an existing entry in the hashmap (since it will only try
to add after failing to find one). But other callers won't have the same
behavior, so we should catch this case and free the now-dangling entry.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Mar 2023 17:38:04 +0000 (13:38 -0400)]
fast-export: simplify initialization of anonymized hashmaps
We take pains to avoid doing a lookup on a hashmap which has not been
initialized with hashmap_init(). That was necessary back when this code
was written. But hashmap_get() became safer in b7879b0ba6e (hashmap:
allow re-use after hashmap_free(), 2020-11-02). Since then it's OK to
call functions on a zero-initialized table; it will just correctly
return NULL, since there is no match.
This simplifies the code a little, and also lets us keep the
initialization line closer to when we add an entry (which is when the
hashmap really does need to be totally initialized). That will help
later refactoring.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Mar 2023 17:37:17 +0000 (13:37 -0400)]
fast-export: drop const when storing anonymized values
We store anonymized values as pointers to "const char *", since they are
conceptually const to callers who use them. But they are actually
allocated strings whose memory is owned by the struct.
The ownership mismatch hasn't been a big deal since we never free() them
(they are held until the program ends), but let's switch them to "char *"
in preparation for changing that.
Since most code only accesses them via anonymize_str(), it can continue
to narrow them to "const char *" in its return value.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 30 Aug 2021 23:06:05 +0000 (16:06 -0700)]
Merge branch 'backport/jk/range-diff-fixes'
"git range-diff" code clean-up. Needed to pacify modern GCC versions.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
Junio C Hamano [Fri, 20 Jan 2023 23:36:21 +0000 (15:36 -0800)]
Merge branch 'backport/jk/curl-avoid-deprecated-api' into maint-2.30
Deal with a few deprecation warning from cURL library.
* jk/curl-avoid-deprecated-api:
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Junio C Hamano [Sat, 10 Dec 2022 07:17:47 +0000 (16:17 +0900)]
Merge branch 'backport/jx/ci-ubuntu-fix' into maint-2.30
Adjust the GitHub CI to newer ubuntu release.
* jx/ci-ubuntu-fix:
github-actions: run gcc-8 on ubuntu-20.04 image
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
ci: remove the pipe after "p4 -V" to catch errors
Junio C Hamano [Thu, 2 Mar 2023 16:44:16 +0000 (08:44 -0800)]
http.c: clear the 'finished' member once we are done with it
In http.c, the run_active_slot() function allows the given "slot" to
make progress by calling step_active_slots() in a loop repeatedly,
and the loop is not left until the request held in the slot
completes.
Ages ago, we used to use the slot->in_use member to get out of the
loop, which misbehaved when the request in "slot" completes (at
which time, the result of the request is copied away from the slot,
and the in_use member is cleared, making the slot ready to be
reused), and the "slot" gets reused to service a different request
(at which time, the "slot" becomes in_use again, even though it is
for a different request). The loop terminating condition mistakenly
thought that the original request has yet to be completed.
Today's code, after baa7b67d (HTTP slot reuse fixes, 2006-03-10)
fixed this issue, uses a separate "slot->finished" member that is
set in run_active_slot() to point to an on-stack variable, and the
code that completes the request in finish_active_slot() clears the
on-stack variable via the pointer to signal that the particular
request held by the slot has completed. It also clears the in_use
member (as before that fix), so that the slot itself can safely be
reused for an unrelated request.
One thing that is not quite clean in this arrangement is that,
unless the slot gets reused, at which point the finished member is
reset to NULL, the member keeps the value of &finished, which
becomes a dangling pointer into the stack when run_active_slot()
returns. Clear the finished member before the control leaves the
function, which has a side effect of unconfusing compilers like
recent GCC 12 that is over-eager to warn against such an assignment.
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
Technically, the pointer difference `end - start` _could_ be negative,
and when cast to an (unsigned) `size_t` that would cause problems. In
this instance, the symptom is:
dir.c: In function 'git_url_basename':
dir.c:3087:13: error: 'memchr' specified bound [9223372036854775808, 0]
exceeds maximum object size 9223372036854775807
[-Werror=stringop-overread]
CC ewah/bitmap.o
3087 | if (memchr(start, '/', end - start) == NULL
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While it is a bit far-fetched to think that `end` (which is defined as
`repo + strlen(repo)`) and `start` (which starts at `repo` and never
steps beyond the NUL terminator) could result in such a negative
difference, GCC has no way of knowing that.
See also https://gcc.gnu.org/bugzilla//show_bug.cgi?id=85783.
Let's just add a safety check, primarily for GCC's benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 21 Mar 2023 21:18:55 +0000 (14:18 -0700)]
Merge branch 'jk/format-patch-ignore-noprefix'
"git format-patch" honors the src/dst prefixes set to nonstandard
values with configuration variables like "diff.noprefix", causing
receiving end of the patch that expects the standard -p1 format to
break. Teach "format-patch" to ignore end-user configuration and
always use the standard prefixes.
This is a backward compatibility breaking change.
* jk/format-patch-ignore-noprefix:
rebase: prefer --default-prefix to --{src,dst}-prefix for format-patch
format-patch: add format.noprefix option
format-patch: do not respect diff.noprefix
diff: add --default-prefix option
t4013: add tests for diff prefix options
diff: factor out src/dst prefix setup
Junio C Hamano [Tue, 21 Mar 2023 17:27:08 +0000 (10:27 -0700)]
am: refer to format-patch in the documentation
There were two reasons we didn't do this. As "git am" is designed
to grok e-mailed patches, not necessarily taken out of a Git
repostiory or even if it came from a Git repository not necessarily
produced with format-patch, we didn't want to single it out as the
"blessed" input producer to the command. Also, in the original
workflow that "git am" was invented for, the user of "am" was
expected to be a different person than the users of "format-patch".
But this is a very safe change to make in 2023. Thanks to the
effort by many contributors, Git ended up becoming a bit more
popular than we initially thought it would be, and "format-patch",
which took me a few weeks to pursuade Linus to take in 2005, seems
to have become the de-facto standard tool to produce patch e-mails.
Interestingly, the documentation for "git apply", which is listed in
SEE ALSO section of "git am" documentation, does mention "am" and
"format-patch" as two things that are related but different from
"apply" in an early part.
Suggested-by: Kai Grossjohann <kai.grossjohann@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Mon, 20 Mar 2023 19:00:47 +0000 (13:00 -0600)]
doc: remove GNU troff workaround
In 2007 the docbook project made the mistake of converting ' to \' for
man pages [1]. It's a problem because groff interprets \' as acute
accent which is rendered as ' in ASCII, but as ´ in utf-8.
This started a cascade of bug reports in git [2], debian [3], Arch Linux
[4], docbook itself [5], and probably many others.
A solution was to use the correct groff character: \(aq, which is always
rendered as ', but the problem is that such character doesn't work in
other troff programs.
A portable solution required the use of a conditional character that is
\(aq in groff, but ' in all others:
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
The proper solution took time to be implemented in docbook, but in 2010
they did it [6]. So the docbook man page stylesheets were broken from
1.73 to 1.76.
Unfortunately by that point many workarounds already existed. In the
case of git, GNU_ROFF was introduced, and in the case of Arch Linux
a mapping from \' to ' was added to groff's man.local. Other
distributions might have done the same, or similar workarounds.
Since 2010 there is no need for this workaround, which is fixed
elsewhere, not just in docbook, but other layers as well.
Inspired-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Eggert [Mon, 20 Mar 2023 23:05:07 +0000 (16:05 -0700)]
git-compat-util: use gettimeofday(2) for time(2)
Use gettimeofday instead of time(NULL) to get current time.
This avoids clock skew on glibc 2.31+ on Linux, where in the
first 1 to 2.5 ms of every second, time(NULL) returns a
value that is one less than the tv_sec part of
higher-resolution timestamps such as those returned by
gettimeofday or timespec_get, or those in the file system.
There are similar clock skew problems on AIX and MS-Windows,
which have problems in the first 5 ms of every second.
Without this patch, users can observe Git issuing a
timestamp T+1 before it issues timestamp T, because Git
sometimes uses time(NULL) or time(&t) and sometimes uses
higher-res methods like gettimeofday. Although strictly
speaking users should tolerate this behavior because a
superuser can always change the clock back, this is a
quality of implementation issue and users naturally expect
Git to issue timestamps in increasing order unless the
superuser has fiddled with the system clock.
This patch always uses gettimeofday(...) instead of time(...),
and I have verified that the resulting .o files never refer
to the name 'time'. A trickier patch would change only
those calls for which timestamp monotonicity is user-visible.
Such a patch would require more expertise about Git internals,
though, and would be harder to maintain later.
Another possibility would be to change Git's documentation
to warn users that Git does not always issue timestamps in
increasing order. However, Git users would likely be either
dismayed by this possibility, or confused by the level of
detail that any such documentation would require.
Yet another possibility would be to fix the Linux kernel so
that the time syscall is consistent with the other timestamp
syscalls. I suppose this has not been done due to
performance implications. (Git's use of timestamps is rare
enough that performance is not a significant consideration
for git.) However, this wouldn't fix Git's problem on older
Linux kernels, or on AIX or MS-Windows.
Signed-off-by: Paul Eggert <eggert@cs.ucla.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 21 Mar 2023 06:26:08 +0000 (06:26 +0000)]
csum-file.h: remove unnecessary inclusion of cache.h
With the change in the last commit to move several functions to
write-or-die.h, csum-file.h no longer needs to include cache.h.
However, removing that include forces several other C files, which
directly or indirectly dependend upon csum-file.h's inclusion of
cache.h, to now be more explicit about their dependencies.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 21 Mar 2023 06:26:02 +0000 (06:26 +0000)]
treewide: remove unnecessary includes of cache.h
The last several commits were geared at replacing the include of cache.h
in strbuf.c with an include of git-compat-util.h. Unfortunately, I had
to drop a patch moving some functions from cache.h to object-name.h, due
to excessive conflicts with other in-flight topics.
However, even without that patch, the series of patches so far allows us
to modify a number of C files to replace an include of cache.h with
git-compat-util.h. Do that to reduce our dependencies.
(If we could have kept our object-name.h patch in this series, it would
have also let us reduce the includes in checkout.c and fmt-merge-msg.c
in addition to strbuf.c).
Just to ensure that nothing else was bringing in cache.h, all of the
affected files have been checked to ensure that
gcc -E -I. $SOURCE_FILE | grep '"cache.h"'
found no hits and that
make DEVELOPER=1 ${OBJECT_FILE_FOR_SOURCE_FILE}
successfully compiles without warnings.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 21 Mar 2023 06:25:59 +0000 (06:25 +0000)]
cache.h: remove expand_user_path()
expand_user_path() was renamed to interpolate_path() back in mid-2021,
but reinstated with a #define and a NEEDSWORK comment that we would
eventually want to get rid of it. Do so now.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 21 Mar 2023 06:25:58 +0000 (06:25 +0000)]
abspath.h: move absolute path functions from cache.h
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 21 Mar 2023 06:25:56 +0000 (06:25 +0000)]
treewide: remove unnecessary cache.h inclusion from several sources
A number of files were apparently including cache.h solely to get
gettext.h. By making those files explicitly include gettext.h, we can
already drop the include of cache.h in these files. On top of that,
there were some files using cache.h that didn't need to for any reason.
Remove these unnecessary includes.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 21 Mar 2023 06:25:55 +0000 (06:25 +0000)]
treewide: remove unnecessary inclusion of gettext.h
Looking at things from the opposite angle of the last patch, we had a
few files that were including gettext.h and perhaps needed it at some
point in history, but no longer require it. Remove the include.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 21 Mar 2023 06:25:54 +0000 (06:25 +0000)]
treewide: be explicit about dependence on gettext.h
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 21 Mar 2023 06:25:53 +0000 (06:25 +0000)]
treewide: remove unnecessary cache.h inclusion from a few headers
Ever since a64215b6cd ("object.h: stop depending on cache.h; make
cache.h depend on object.h", 2023-02-24), we have a few headers that
could have replaced their include of cache.h with an include of
object.h. Make that change now.
Some C files had to start including cache.h after this change (or some
smaller header it had brought in), because the C files were depending
on things from cache.h but were only formerly implicitly getting
cache.h through one of these headers being modified in this patch.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 20 Mar 2023 11:26:55 +0000 (11:26 +0000)]
commit-reach: add tips_reachable_from_bases()
Both 'git for-each-ref --merged=<X>' and 'git branch --merged=<X>' use
the ref-filter machinery to select references or branches (respectively)
that are reachable from a set of commits presented by one or more
--merged arguments. This happens within reach_filter(), which uses the
revision-walk machinery to walk history in a standard way.
However, the commit-reach.c file is full of custom searches that are
more efficient, especially for reachability queries that can terminate
early when reachability is discovered. Add a new
tips_reachable_from_bases() method to commit-reach.c and call it from
within reach_filter() in ref-filter.c. This affects both 'git branch'
and 'git for-each-ref' as tested in p1500-graph-walks.sh.
For the Linux kernel repository, we take an already-fast algorithm and
make it even faster:
Test HEAD~1 HEAD
-------------------------------------------------------------------
1500.5: contains: git for-each-ref --merged 0.13 0.02 -84.6%
1500.6: contains: git branch --merged 0.14 0.02 -85.7%
1500.7: contains: git tag --merged 0.15 0.03 -80.0%
(Note that we remove the iterative 'git rev-list' test from p1500
because it no longer makes sense as a comparison to 'git for-each-ref'
and would just waste time running it for these comparisons.)
The algorithm is implemented in commit-reach.c in the method
tips_reachable_from_base(). This method takes a string_list of tips and
assigns the 'util' for each item with the value 1 if the base commit can
reach those tips.
Like other reachability queries in commit-reach.c, the fastest way to
search for "can A reach B?" is to do a depth-first search up to the
generation number of B, preferring to explore first parents before later
parents. While we must walk all reachable commits up to that generation
number when the answer is "no", the depth-first search can answer "yes"
much faster than other approaches in most cases.
This search becomes trickier when there are multiple targets for the
depth-first search. The commits with lower generation number are more
likely to be within the history of the start commit, but we don't want
to waste time searching commits of low generation number if the commit
target with lowest generation number has already been found.
The trick here is to take the input commits and sort them by generation
number in ascending order. Track the index within this order as
min_generation_index. When we find a commit, if its index in the list is
equal to min_generation_index, then we can increase the generation
number boundary of our search to the next-lowest value in the list.
With this mechanism, the number of commits to search is minimized with
respect to the depth-first search heuristic. We will walk all commits up
to the minimum generation number of a commit that is _not_ reachable
from the start, but we will walk only the necessary portion of the
depth-first search for the reachable commits of lower generation.
Add extra tests for this behavior in t6600-test-reach.sh as the
interesting data shape of that repository can sometimes demonstrate
corner case bugs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 20 Mar 2023 11:26:54 +0000 (11:26 +0000)]
for-each-ref: add ahead-behind format atom
The previous change implemented the ahead_behind() method, including an
algorithm to compute the ahead/behind values for a number of commit tips
relative to a number of commit bases. Now, integrate that algorithm as
part of 'git for-each-ref' hidden behind a new format atom,
ahead-behind. This naturally extends to 'git branch' and 'git tag'
builtins, as well.
This format allows specifying multiple bases, if so desired, and all
matching references are compared against all of those bases. For this
reason, failing to read a reference provided from these atoms results in
an error.
In order to translate the ahead_behind() method information to the
format output code in ref-filter.c, we must populate arrays of
ahead_behind_count structs. In struct ref_array, we store the full array
that will be passed to ahead_behind(). In struct ref_array_item, we
store an array of pointers that point to the relvant items within the
full array. In this way, we can pull all relevant ahead/behind values
directly when formatting output for a specific item. It also ensures the
lifetime of the ahead_behind_count structs matches the time that the
array is being used.
Add specific tests of the ahead/behind counts in t6600-test-reach.sh, as
it has an interesting repository shape. In particular, its merging
strategy and its use of different commit-graphs would demonstrate over-
counting if the ahead_behind() method did not already account for that
possibility.
Also add tests for the specific for-each-ref, branch, and tag builtins.
In the case of 'git tag', there are intersting cases that happen when
some of the selected tips are not commits. This requires careful logic
around commits_nr in the second loop of filter_ahead_behind(). Also, the
test in t7004 is carefully located to avoid being dependent on the GPG
prereq. It also avoids using the test_commit helper, as that will add
ticks to the time and disrupt the expected timestamps in later tag
tests.
Also add performance tests in a new p1300-graph-walks.sh script. This
will be useful for more uses in the future, but for now compare the
ahead-behind counting algorithm in 'git for-each-ref' to the naive
implementation by running 'git rev-list --count' processes for each
input.
For the Git source code repository, the improvement is already obvious:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.07(0.07+0.00)
1500.3: ahead-behind counts: git branch 0.07(0.06+0.00)
1500.4: ahead-behind counts: git tag 0.07(0.06+0.00)
1500.5: ahead-behind counts: git rev-list 1.32(1.04+0.27)
But the standard performance benchmark is the Linux kernel repository,
which demosntrates a significant improvement:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.27(0.24+0.02)
1500.3: ahead-behind counts: git branch 0.27(0.24+0.03)
1500.4: ahead-behind counts: git tag 0.28(0.27+0.01)
1500.5: ahead-behind counts: git rev-list 4.57(4.03+0.54)
The 'git rev-list' test exists in this change as a demonstration, but it
will be removed in the next change to avoid wasting time on this
comparison.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 20 Mar 2023 11:26:53 +0000 (11:26 +0000)]
commit-reach: implement ahead_behind() logic
Fully implement the commit-counting logic required to determine
ahead/behind counts for a batch of commit pairs. This is a new library
method within commit-reach.h. This method will be linked to the
for-each-ref builtin in the next change.
The interface for ahead_behind() uses two arrays. The first array of
commits contains the list of all starting points for the walk. This
includes all tip commits _and_ base commits. The second array specifies
base/tip pairs by pointing to commits within the first array, by index.
The second array also stores the resulting ahead/behind counts for each
of these pairs.
This implementation of ahead_behind() allows multiple bases, if desired.
Even with multiple bases, there is only one commit walk used for
counting the ahead/behind values, saving time when the base/tip ranges
overlap significantly.
This interface for ahead_behind() also makes it very easy to call
ensure_generations_valid() on the entire array of bases and tips. This
call is necessary because it is critical that the walk that counts
ahead/behind values never walks a commit more than once. Without
generation numbers on every commit, there is a possibility that a
commit date skew could cause the walk to revisit a commit and then
double-count it. For this reason, it is strongly recommended that 'git
ahead-behind' is only run in a repository with a commit-graph file that
covers most of the reachable commits, storing precomputed generation
numbers. If no commit-graph exists, this walk will be much slower as it
must walk all reachable commits in ensure_generations_valid() before
performing the counting logic.
It is possible to detect if generation numbers are available at run time
and redirect the implementation to another algorithm that does not
require this property. However, that implementation requires a commit
walk per base/tip pair _and_ can be slower due to the commit date
heuristics required. Such an implementation could be considered in the
future if there is a reason to include it, but most Git hosts should
already be generating a commit-graph file as part of repository
maintenance. Most Git clients should also be generating commit-graph
files as part of background maintenance or automatic GCs.
Now, let's discuss the ahead/behind counting algorithm.
The first array of commits are considered the starting commits. The
index within that array will play a critical role.
We create a new commit slab that maps commits to a bitmap. For a given
commit (anywhere in the history), its bitmap stores information relative
to which of the input commits can reach that commit. The ith bit will be
on if the ith commit from the starting list can reach that commit. It is
important to notice that these bitmaps are not the typical "reachability
bitmaps" that are stored in .bitmap files. Instead of signalling which
objects are reachable from the current commit, they instead signal
"which starting commits can reach me?" It is also important to know that
the bitmap is not necessarily "complete" until we walk that commit. We
will perform a commit walk by generation number in such a way that we
can guarantee the bitmap is correct when we visit that commit.
At the beginning of the ahead_behind() method, we initialize the bitmaps
for each of the starting commits. By enabling the ith bit for the ith
starting commit, we signal "the ith commit can reach itself."
We walk commits by popping the commit with maximum generation number out
of the queue, guaranteeing that we will never walk a child of that
commit in any future steps.
As we walk, we load the bitmap for the current commit and perform two
main steps. The _second_ step examines each parent of the current commit
and adds the current commit's bitmap bits to each parent's bitmap. (We
create a new bitmap for the parent if this is our first time seeing that
parent.) After adding the bits to the parent's bitmap, the parent is
added to the walk queue. Due to this passing of bits to parents, the
current commit has a guarantee that the ith bit is enabled on its bitmap
if and only if the ith commit can reach the current commit.
The first step of the walk is to examine the bitmask on the current
commit and decide which ranges the commit is in or not. Due to the "bit
pushing" in the second step, we have a guarantee that the ith bit of the
current commit's bitmap is on if and only if the ith starting commit can
reach it. For each ahead_behind_count struct, check the base_index and
tip_index to see if those bits are enabled on the current bitmap. If
exactly one bit is enabled, then increment the corresponding 'ahead' or
'behind' count. This increment is the reason we _absolutely need_ to
walk commits at most once.
The only subtle thing to do with this walk is to check to see if a
parent has all bits on in its bitmap, in which case it becomes "stale"
and is marked with the STALE bit. This allows queue_has_nonstale() to be
the terminating condition of the walk, which greatly reduces the number
of commits walked if all of the commits are nearby in history. It avoids
walking a large number of common commits when there is a deep history.
We also use the helper method insert_no_dup() to add commits to the
priority queue without adding them multiple times. This uses the PARENT2
flag. Thus, we must clear both the STALE and PARENT2 bits of all
commits, in case ahead_behind() is called multiple times in the same
process.
Co-authored-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the just-introduced compute_reachable_generation_numbers_1() to
implement a function which dynamically computes topological levels (or
corrected commit dates) for out-of-graph commits.
This will be useful for the ahead-behind algorithm we are about to
introduce, which needs accurate topological levels on _all_ commits
reachable from the tips in order to avoid over-counting.
Co-authored-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 20 Mar 2023 11:26:51 +0000 (11:26 +0000)]
commit-graph: return generation from memory
The commit_graph_generation() method used to report a value of
GENERATION_NUMBER_INFINITY if the commit_graph_data_slab had an instance
for the given commit but the graph_pos indicated the commit was not in
the commit-graph file.
However, an upcoming change will introduce the ability to set generation
values in-memory without writing the commit-graph file. Thus, we can no
longer trust 'graph_pos' to indicate whether or not the generation
member can be trusted.
Instead, trust the 'generation' member if the commit has a value in the
slab _and_ the 'generation' member is non-zero. Otherwise, treat it as
GENERATION_NUMBER_INFINITY.
This only makes a difference for a very old case for the commit-graph:
the very first Git release to write commit-graph files wrote zeroes in
the topological level positions. If we are parsing a commit-graph with
all zeroes, those commits will now appear to have
GENERATION_NUMBER_INFINITY (as if they were not parsed from the
commit-graph).
I attempted several variations to work around the need for providing an
uninitialized 'generation' member, but this was the best one I found. It
does require a change to a verification test in t5318 because it reports
a different error than the one about non-zero generation numbers.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the generic algorithm
compute_reachable_generation_numbers() and used it as the core
functionality of compute_topological_levels(). Now, use it as the core
functionality of compute_generation_numbers().
The main difference here is that we use generation version 2, which is
used in to toggle the logic in compute_generation_from_max() for
computing the corrected commit date based on the corrected commit dates
of the parent commits (and the commit date of the current commit). It
also uses different methods for (get|set)_generation in the vtable in
order to store and access the value in the correct places.
Co-authored-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch extracts the common code used to compute topological levels
and corrected committer dates into a common routine,
compute_reachable_generation_numbers(). For ease of reading, it only
modifies compute_topological_levels() to use this new routine, leaving
compute_generation_numbers() to be modified in the next change.
This new routine dispatches to call the necessary functions to get and
set the generation number for a given commit through a vtable (the
compute_generation_info struct).
Computing the generation number itself is done in
compute_generation_from_max(), which dispatches its implementation based
on the generation version requested, or issuing a BUG() for unrecognized
generation versions. This does not use a vtable because the logic
depends only on the generation number version, not where the data is
being loaded from or being stored to. This is a subtle point that will
make more sense in a future change that modifies the in-memory
generation values instead of just preparing values for writing to a
commit-graph file.
This change looks like it adds a lot of new code. However, two upcoming
changes will be quite small due to the work being done in this change.
Co-authored-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 20 Mar 2023 11:26:48 +0000 (11:26 +0000)]
for-each-ref: explicitly test no matches
The for-each-ref builtin can take a list of ref patterns, but if none
match, it still succeeds (but with no output). Add an explicit test that
demonstrates that behavior.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 20 Mar 2023 11:26:47 +0000 (11:26 +0000)]
for-each-ref: add --stdin option
When a user wishes to input a large list of patterns to 'git
for-each-ref' (likely a long list of exact refs) there are frequently
system limits on the number of command-line arguments.
Add a new --stdin option to instead read the patterns from standard
input. Add tests that check that any unrecognized arguments are
considered an error when --stdin is provided. Also, an empty pattern
list is interpreted as the complete ref set.
When reading from stdin, we populate the filter.name_patterns array
dynamically as opposed to pointing to the 'argv' array directly. This is
simple when using a strvec, as it is NULL-terminated in the same way. We
then free the memory directly from the strvec.
Helped-by: Phillip Wood <phillip.wood123@gmail.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 19 Mar 2023 16:56:48 +0000 (17:56 +0100)]
parse-options.h: use designated initializers in OPT_* macros
Use designated initializers in the expansions of the OPT_* macros to
make it more readable which one-letter macro parameter initializes
which field in the resulting 'struct option'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the 'help' parameter as it matches one of the fields in 'struct
option', and, while at it, rename all other parameters to the usual
one-letter name used in similar macro definitions.
Furthermore, put all parameters in the replacement list between
parentheses, like all other OPT_* macros do.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 19 Mar 2023 16:56:46 +0000 (17:56 +0100)]
parse-options.h: use consistent name for the callback parameters
In the various OPT_* macros the 'f' parameter is usually used to
specify flags, while the 'cb' parameter is used to specify a callback
function. OPT_CALLBACK and OPT_NUMBER_CALLBACKS, however, are
inconsistent with the rest, as they use 'f' to specify their callback
function.
Rename their callback macro parameters to 'cb' to avoid the
inconsistency.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 19 Mar 2023 16:27:12 +0000 (17:27 +0100)]
treewide: remove unnecessary inclusions of parse-options.h from headers
The headers 'diagnose.h', 'list-objects-filter-options.h',
'ref-filter.h' and 'remote.h' declare option parsing callback
functions with a 'struct option*' parameter, and 'revision.h' declares
an option parsing helper function taking 'struct parse_opt_ctx_t*' and
'struct option*' parameters. These headers all include
'parse-options.h', although they don't need any of the type
definitions from that header file. Furthermore,
'list-objects-filter-options.h' and 'ref-filter.h' also define some
OPT_* macros to initialize a 'struct option', but these don't
necessitate the inclusion of parse-options.h in these headers either,
because these macros are only expanded in source files.
Remove these unnecessary inclusions of parse-options.h and use forward
declarations to declare the necessary types.
After this patch none of the header files include parse-options.h
anymore.
With these changes, the build time after modifying only
parse-options.h is reduced by about 30%, and the number of targets
built is almost 20% less:
Before:
$ touch parse-options.h && time make -j4 |wc -l
353
real 1m1.527s
user 3m32.205s
sys 0m15.903s
After:
289
real 0m39.285s
user 2m12.540s
sys 0m11.164s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 19 Mar 2023 16:27:11 +0000 (17:27 +0100)]
treewide: include parse-options.h in source files
The builtins 'ls-remote', 'pack-objects', 'receive-pack', 'reflog' and
'send-pack' use parse_options(), but their source files don't directly
include 'parse-options.h'. Furthermore, the source files
'diagnose.c', 'list-objects-filter-options.c', 'remote.c' and
'send-pack.c' define option parsing callback functions, while
'revision.c' defines an option parsing helper function, and thus need
access to various fields in 'struct option' and 'struct
parse_opt_ctx_t', but they don't directly include 'parse-options.h'
either. They all can still be built, of course, because they include
one of the header files that does include 'parse-options.h' (though
unnecessarily, see the next commit).
Add those missing includes to these files, as our general rule is that
"a C file must directly include the header files that declare the
functions and the types it uses".
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to print updated references during a fetch, the two different
call sites that do this will first call `format_display()` followed by a
call to `fputs()`. This is needlessly roundabout now that we have the
`display_state` structure that encapsulates all of the printing logic
for references.
Move displaying the reference updates into `format_display()` and rename
it to `display_ref_update()` to better match its new purpose, which
finalizes the conversion to make both the formatting and printing logic
of reference updates self-contained. This will make it easier to add new
output formats and printing to a different file descriptor than stderr.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching from a remote, we not only print the actual references
that have changed, but will also print the URL from which we have
fetched them to standard output. The logic to handle this is duplicated
across two different callsites with some non-trivial logic to compute
the anonymized URL. Furthermore, we're using global state to track
whether we have already shown the URL to the user or not.
Refactor the code by moving it into `format_display()`. Like this, we
can convert the global variable into a member of `display_state`. And
second, we can deduplicate the logic to compute the anonymized URL.
This also works as expected when fetching from multiple remotes, for
example via a group of remotes, as we do this by forking a standalone
git-fetch(1) process per remote that is to be fetched.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: centralize handling of per-reference format
The function `format_display()` is used to print a single reference
update to a buffer which will then ultimately be printed by the caller.
This architecture causes us to duplicate some logic across the different
callsites of this function. This makes it hard to follow the code as
some parts of the logic are located in one place, while other parts of
the logic are located in a different place. Furthermore, by having the
logic scattered around it becomes quite hard to implement a new output
format for the reference updates.
We can make the logic a whole lot easier to understand by making the
`format_display()` function self-contained so that it handles formatting
and printing of the references. This will eventually allow us to easily
implement a completely different output format, but also opens the door
to conditionally print to either stdout or stderr depending on the
output format.
As a first step towards that goal we move the formatting directive used
by both callers to print a single reference update into this function.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: pass the full local reference name to `format_display`
Before printing the name of the local references that would be updated
by a fetch we first prettify the reference name. This is done at the
calling side so that `format_display()` never sees the full name of the
local reference. This restricts our ability to introduce new output
formats that might want to print the full reference name.
Right now, all callsites except one are prettifying the reference name
anyway. And the only callsite that doesn't passes `FETCH_HEAD` as the
hardcoded reference name to `format_display()`, which would never be
changed by a call to `prettify_refname()` anyway. So let's refactor the
code to pass in the full local reference name and then prettify it in
the formatting code.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-fetch(1) command supports printing references either in "full"
or "compact" format depending on the `fetch.ouput` config key. The
format that is to be used is tracked in a global variable.
De-globalize the variable by moving it into the `display_state`
structure.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: move reference width calculation into `display_state`
In order to print references in proper columns we need to calculate the
width of the reference column before starting to print the references.
This is done with the help of a global variable `refcol_width`.
Refactor the code to instead use a new structure `display_state` that
contains the computed width and plumb it through the stack as required.
This is only the first step towards de-globalizing the state required to
print references.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Mon, 20 Mar 2023 16:10:02 +0000 (16:10 +0000)]
wildmatch: hide internal return values
WM_ABORT_ALL and WM_ABORT_TO_STARSTAR are used internally to limit
backtracking when a match fails, they are not of interest to the caller
and so should not be public.
Suggested-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Mon, 20 Mar 2023 16:10:01 +0000 (16:10 +0000)]
wildmatch: avoid undefined behavior
The code changed in this commit is designed to check if the pattern
starts with "**/" or contains "/**/" (see 3a078dec33 (wildmatch: fix
"**" special case, 2013-01-01)). Unfortunately when the pattern begins
with "**/" `prev_p = p - 2` is evaluated when `p` points to the second
"*" and so the subtraction is undefined according to section 6.5.6 of
the C standard because the result does not point within the same object
as `p`. Fix this by avoiding the subtraction unless it is well defined.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Mon, 20 Mar 2023 16:10:00 +0000 (16:10 +0000)]
wildmatch: fix exponential behavior
When dowild() cannot match a '*' or '/**/' wildcard then it must return
WM_ABORT_TO_STARSTAR or WM_ABORT_ALL respectively. Failure to observe
this results in unnecessary backtracking and the time taken for a failed
match increases exponentially with the number of wildcards in the
pattern [1]. Unfortunately in some instances dowild() returns WM_NOMATCH
for a failed match resulting in long match times for patterns containing
multiple wildcards as can be seen in the following benchmark.
(Note that the timings in the Benchmark 1 are really measuring the time
to execute test-tool rather than the time to match the pattern)
Benchmark 1: t/helper/test-tool wildmatch wildmatch aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaab "*a"
Time (mean ± σ): 22.8 ms ± 1.7 ms [User: 12.1 ms, System: 10.6 ms]
Range (min … max): 19.4 ms … 26.9 ms 113 runs
Warning: Ignoring non-zero exit code.
Benchmark 2: t/helper/test-tool wildmatch wildmatch aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaab "*a*a*a*a*a*a*a*a*a"
Time (mean ± σ): 5.244 s ± 0.228 s [User: 5.229 s, System: 0.010 s]
Range (min … max): 4.969 s … 5.707 s 10 runs
The security implications are limited as it only affects operations that
are potentially DoS vectors. For example by creating a blob containing
such a pattern a malicious user can exploit this behavior to use large
amounts of CPU time on a remote server by pushing the blob and then
creating a new clone with --filter=sparse:oid. However this filter type
is usually disabled as it is known to consume large amounts of CPU time
even without this bug.
The WM_MATCH changed in the first hunk of this patch comes from the
original implementation imported from rsync in 5230f605e1 (Import
wildmatch from rsync, 2012-10-15). Compared to the others converted here
it is fairly harmless as it only triggers at the end of the pattern and
so will only cause a single unnecessary backtrack. The others introduced
by 6f1a31f0aa (wildmatch: advance faster in <asterisk> + <literal>
patterns, 2013-01-01) and 46983441ae (wildmatch: make a special case for
"*/" with FNM_PATHNAME, 2013-01-01) are more pernicious and will cause
exponential behavior.
A new test is added to protect against future regressions.
[1] https://research.swtch.com/glob
Helped-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Sat, 18 Mar 2023 15:46:46 +0000 (16:46 +0100)]
t1507: assert output of rev-parse
Tests in t1507-rev-parse-upstream.sh compare files "expect" and "actual"
to assert the output of "git rev-parse", "git show", and "git log".
However, two of the tests '@{reflog}-parsing does not look beyond colon'
and '@{upstream}-parsing does not look beyond colon' don't inspect the
contents of the created files.
Assert output of "git rev-parse" in tests in t1507-rev-parse-upstream.sh
to improve test coverage.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Sat, 18 Mar 2023 15:46:45 +0000 (16:46 +0100)]
t1404: don't create unused file
Some tests in file t1404-update-ref-errors.sh create file "unchanged" as
the expected side for a test_cmp assertion at the end of the test for
output of "git for-each-ref". Test 'no bogus intermediate values during
delete' also creates a file named "unchanged" using "git for-each-ref".
However, the file isn't used for any assertions in the test. Instead,
"git rev-parse" is used to compare the reference with variable $D.
Don't create unused file "unchanged" in test 'no bogus intermediate
values during delete' of t1404-update-ref-errors.sh.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Sat, 18 Mar 2023 15:46:44 +0000 (16:46 +0100)]
t1400: assert output of update-ref
In t1400-update-ref.sh test 'transaction can create and delete' creates
files "expect" and "actual", but doesn't compare them. Similarly, test
'transaction cannot restart ongoing transaction' redirects output of
"git update-ref" to file "actual", but doesn't check its contents with
any assertions.
Assert output of "git update-ref" in tests to improve test coverage in
t1400-update-ref.sh.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Sat, 18 Mar 2023 15:46:43 +0000 (16:46 +0100)]
t1302: don't create unused file
Test 'gitdir selection on unsupported repo' in t1302-repo-version.sh
writes output of a "git config" invocation to file "actual". However,
the test doesn't have any assertions for the file. The file was used by
this test until commit b9605bc4f2 (config: only read .git/config from
configured repos, 2016-09-12), before which "git config" was expected to
print the bogus value of "core.repositoryformatversion" to standard
output.
Don't redirect output of "git config" to file "actual" in test 'gitdir
selection on unsupported repo'.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Sat, 18 Mar 2023 15:46:42 +0000 (16:46 +0100)]
t1010: don't create unused files
Builtin "git mktree" writes the the object name of the tree object built
to the standard output. Tests 'mktree refuses to read ls-tree -r output
(1)' and 'mktree refuses to read ls-tree -r output (2)' in
"t1010-mktree.sh" redirect output of "git mktree" to a file, but don't
use its contents in assertions.
Don't redirect output of "git mktree" to file "actual" in tests that
assert that an invocation of "git mktree" must fail.
Output of "git mktree" is empty when it refuses to build a tree object.
So, alternatively, the test could assert that the output is empty.
However, there isn't a good reason for the user to expect the command to
be silent in such cases, so we shouldn't enforce it. The user shouldn't
use the output of a failing command anyway.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Sat, 18 Mar 2023 15:46:41 +0000 (16:46 +0100)]
t1006: assert error output of cat-file
Test "cat-file $arg1 $arg2 error on missing full OID" in
t1006-cat-file.sh compares files "expect.err" and "err.actual" to assert
the expected error output of "git cat-file". A similar test in the same
file named "cat-file $arg1 $arg2 error on missing short OID" also
creates these two files, but doesn't use them in assertions.
Assert error output of "git cat-file" in test "cat-file $arg1 $arg2
error on missing short OID" of t1006-cat-file.sh to improve test
coverage.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Sat, 18 Mar 2023 15:46:40 +0000 (16:46 +0100)]
t1005: assert output of ls-files
Test 'reset should work' in t1005-read-tree-reset.sh compares two files
"expect" and "actual" to assert the expected output of "git ls-files".
Several other tests in the same file also create files "expect" and
"actual", but don't use them in assertions.
Assert output of "git ls-files" in t1005-read-tree-reset.sh to improve
test coverage.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 19 Mar 2023 22:03:12 +0000 (15:03 -0700)]
Merge branch 'fc/advice-diverged-history'
After "git pull" that is configured with pull.rebase=false
merge.ff=only fails due to our end having our own development, give
advice messages to get out of the "Not possible to fast-forward"
state.
* fc/advice-diverged-history:
advice: add diverging advice for novices
Once we start running, we assumed that the list of alternate object
databases would never change. Hook into the machinery used to
update the list of packfiles during runtime to update this list as
well.
* ds/reprepare-alternates-when-repreparing-packfiles:
object-file: reprepare alternates when necessary
Junio C Hamano [Sun, 19 Mar 2023 22:03:12 +0000 (15:03 -0700)]
Merge branch 'jk/bundle-use-dash-for-stdfiles'
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
A few subcommands have been taught to stop users from working on a
branch that is being used in another worktree linked to the same
repository.
* rj/avoid-switching-to-already-used-branch:
switch: reject if the branch is already checked out elsewhere (test)
rebase: refuse to switch to a branch already checked out elsewhere (test)
branch: fix die_if_checked_out() when ignore_current_worktree
worktree: introduce is_shared_symref()
Junio C Hamano [Sun, 19 Mar 2023 22:03:11 +0000 (15:03 -0700)]
Merge branch 'rj/bisect-already-used-branch'
Allow "git bisect reset" to check out the original branch when the
branch is already checked out in a different worktree linked to the
same repository.
* rj/bisect-already-used-branch:
bisect: fix "reset" when branch is checked out elsewhere
Junio C Hamano [Sun, 19 Mar 2023 22:03:10 +0000 (15:03 -0700)]
Merge branch 'zh/push-to-delete-onelevel-ref'
"git push" has been taught to allow deletion of refs with one-level
names to help repairing a repository who acquired such a ref by
mistake. In general, we don't encourage use of such a ref, and
creation or update to such a ref is rejected as before.
"git restore" supports options like "--ours" that are only
meaningful during a conflicted merge, but these options are only
meaningful when updating the working tree files. These options are
marked to be incompatible when both "--staged" and "--worktree" are
in effect.
* ak/restore-both-incompatible-with-conflicts:
restore: fault --staged --worktree with merge opts
Jeff King [Fri, 17 Mar 2023 19:08:51 +0000 (15:08 -0400)]
git_connect(): fix corner cases in downgrading v2 to v0
There's code in git_connect() that checks whether we are doing a push
with protocol_v2, and if so, drops us to protocol_v0 (since we know
how to do v2 only for fetches). But it misses some corner cases:
1. it checks the "prog" variable, which is actually the path to
receive-pack on the remote side. By default this is just
"git-receive-pack", but it could be an arbitrary string (like
"/path/to/git receive-pack", etc). We'd accidentally stay in v2
mode in this case.
2. besides "receive-pack" and "upload-pack", there's one other value
we'd expect: "upload-archive" for handling "git archive --remote".
Like receive-pack, this doesn't understand v2, and should use the
v0 protocol.
In practice, neither of these causes bugs in the real world so far. We
do send a "we understand v2" probe to the server, but since no server
implements v2 for anything but upload-pack, it's simply ignored. But
this would eventually become a problem if we do implement v2 for those
endpoints, as older clients would falsely claim to understand it,
leading to a server response they can't parse.
We can fix (1) by passing in both the program path and the "name" of the
operation. I treat the name as a string here, because that's the pattern
set in transport_connect(), which is one of our callers (we were simply
throwing away the "name" value there before).
We can fix (2) by allowing only known-v2 protocols ("upload-pack"),
rather than blocking unknown ones ("receive-pack" and "upload-archive").
That will mean whoever eventually implements v2 push will have to adjust
this list, but that's reasonable. We'll do the safe, conservative thing
(sticking to v0) by default, and anybody working on v2 will quickly
realize this spot needs to be updated.
The new tests cover the receive-pack and upload-archive cases above, and
re-confirm that we allow v2 with an arbitrary "--upload-pack" path (that
already worked before this patch, of course, but it would be an easy
thing to break if we flipped the allow/block logic without also handling
"name" separately).
Here are a few miscellaneous implementation notes, since I had to do a
little head-scratching to understand who calls what:
- transport_connect() is called only for git-upload-archive. For
non-http git remotes, that resolves to the virtual connect_git()
function (which then calls git_connect(); confused yet?). So
plumbing through "name" in connect_git() covers that.
- for regular fetches and pushes, callers use higher-level functions
like transport_fetch_refs(). For non-http git remotes, that means
calling git_connect() under the hood via connect_setup(). And that
uses the "for_push" flag to decide which name to use.
- likewise, plumbing like fetch-pack and send-pack may call
git_connect() directly; they each know which name to use.
- for remote helpers (including http), we already have separate
parameters for "name" and "exec" (another name for "prog"). In
process_connect_service(), we feed the "name" to the helper via
"connect" or "stateless-connect" directives.
There's also a "servpath" option, which can be used to tell the
helper about the "exec" path. But no helpers we implement support
it! For http it would be useless anyway (no reasonable server
implementation will allow you to send a shell command to run the
server). In theory it would be useful for more obscure helpers like
remote-ext, but even there it is not implemented.
It's tempting to get rid of it simply to reduce confusion, but we
have publicly documented it since it was added in fa8c097cc9
(Support remote helpers implementing smart transports, 2009-12-09),
so it's possible some helper in the wild is using it.
- So for v2, helpers (again, including http) are mainly used via
stateless-connect, driven by the main program. But they do still
need to decide whether to do a v2 probe. And so there's similar
logic in remote-curl.c's discover_refs() that looks for
"git-receive-pack". But it's not buggy in the same way. Since it
doesn't support servpath, it is always dealing with a "service"
string like "git-receive-pack". And since it doesn't support
straight "connect", it can't be used for "upload-archive".
So we could leave that spot alone. But I've updated it here to match
the logic we're changing in connect_git(). That seems like the least
confusing thing for somebody who has to touch both of these spots
later (say, to add v2 push support). I didn't add a new test to make
sure this doesn't break anything; we already have several tests (in
t5551 and elsewhere) that make sure we are using v2 over http.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
