connect.c: refactor sending of agent & object-format
Refactor the sending of the "agent" and "object-format" capabilities
into a function.
This was added in its current form in ab67235bc4 (connect: parse v2
refs with correct hash algorithm, 2020-05-25). When we connect to a v2
server we need to know about its object-format, and it needs to know
about ours. Since most things in connect.c and transport.c piggy-back
on the eager getting of remote refs via the handshake() those commands
can make use of the just-sent-over object-format by ls-refs.
But I'm about to add a command that may come after ls-refs, and may
not, but we need the server to know about our user-agent and
object-format. So let's split this into a function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Orgad Shaneh [Mon, 16 May 2022 08:41:41 +0000 (08:41 +0000)]
fetch: limit shared symref check only for local branches
This check was introduced in 8ee5d73137f (Fix fetch/pull when run without
--update-head-ok, 2008-10-13) in order to protect against replacing the ref
of the active branch by mistake, for example by running git fetch origin
master:master.
It was later extended in 8bc1f39f411 (fetch: protect branches checked out
in all worktrees, 2021-12-01) to scan all worktrees.
This operation is very expensive (takes about 30s in my repository) when
there are many tags or branches, and it is executed on every fetch, even if
no local heads are updated at all.
Limit it to protect only refs/heads/* to improve fetch performance.
Signed-off-by: Orgad Shaneh <orgads@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Mon, 16 May 2022 08:38:51 +0000 (10:38 +0200)]
http: add custom hostname to IP address resolutions
Libcurl has a CURLOPT_RESOLVE easy option that allows
the result of hostname resolution in the following
format to be passed:
[+]HOST:PORT:ADDRESS[,ADDRESS]
This way, redirects and everything operating against the
HOST+PORT will use the provided ADDRESS(s).
The following format is also allowed to stop using
hostname resolutions that have already been passed:
-HOST:PORT
See https://curl.se/libcurl/c/CURLOPT_RESOLVE.html for
more details.
Let's add a corresponding "http.curloptResolve" config
option that takes advantage of CURLOPT_RESOLVE.
Each value configured for the "http.curloptResolve" key
is passed "as is" to libcurl through CURLOPT_RESOLVE, so
it should be in one of the above 2 formats. This keeps
the implementation simple and makes us consistent with
libcurl's CURLOPT_RESOLVE, and with curl's corresponding
`--resolve` command line option.
The implementation uses CURLOPT_RESOLVE only in
get_active_slot() which is called by all the HTTP
request sending functions.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Mon, 16 May 2022 11:02:20 +0000 (04:02 -0700)]
fetch-pack: make unexpected peek result non-fatal
When a Git server responds to a fetch request, it may send optional
sections before the packfile section. To handle this, the Git client
calls packet_reader_peek() (see process_section_header()) in order to
see what's next without consuming the line.
However, as implemented, Git errors out whenever what's peeked is not an
ordinary line. This is not only unexpected (here, we only need to know
whether the upcoming line is the section header we want) but causes
errors to include the name of a section header that is irrelevant to the
cause of the error. For example, at $DAYJOB, we have seen "fatal: error
reading section header 'shallow-info'" error messages when none of the
repositories involved are shallow.
Therefore, fix this so that the peek returns 1 if the upcoming line is
the wanted section header and nothing else. Because of this change,
reader->line may now be NULL later in the function, so update the error
message printing code accordingly.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0034: add negative tests and allow git init to mostly work under sudo
Add a support library that provides one function that can be used
to run a "scriplet" of commands through sudo and that helps invoking
sudo in the slightly awkward way that is required to ensure it doesn't
block the call (if shell was allowed as tested in the prerequisite)
and it doesn't run the command through a different shell than the one
we intended.
Add additional negative tests as suggested by Junio and that use a
new workspace that is owned by root.
Document a regression that was introduced by previous commits where
root won't be able anymore to access directories they own unless
SUDO_UID is removed from their environment.
The tests document additional ways that this new restriction could
be worked around and the documentation explains why it might be instead
considered a feature, but a "fix" is planned for a future change.
Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Phillip Wood <phillip.wood123@gmail.com> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util: avoid failing dir ownership checks if running privileged
bdc77d1d685 (Add a function to determine whether a path is owned by the
current user, 2022-03-02) checks for the effective uid of the running
process using geteuid() but didn't account for cases where that user was
root (because git was invoked through sudo or a compatible tool) and the
original uid that repository trusted for its config was no longer known,
therefore failing the following otherwise safe call:
guy@renard ~/Software/uncrustify $ sudo git describe --always --dirty
[sudo] password for guy:
fatal: unsafe repository ('/home/guy/Software/uncrustify' is owned by someone else)
Attempt to detect those cases by using the environment variables that
those tools create to keep track of the original user id, and do the
ownership check using that instead.
This assumes the environment the user is running on after going
privileged can't be tampered with, and also adds code to restrict that
the new behavior only applies if running as root, therefore keeping the
most common case, which runs unprivileged, from changing, but because of
that, it will miss cases where sudo (or an equivalent) was used to change
to another unprivileged user or where the equivalent tool used to raise
privileges didn't track the original id in a sudo compatible way.
Because of compatibility with sudo, the code assumes that uid_t is an
unsigned integer type (which is not required by the standard) but is used
that way in their codebase to generate SUDO_UID. In systems where uid_t
is signed, sudo might be also patched to NOT be unsigned and that might
be able to trigger an edge case and a bug (as described in the code), but
it is considered unlikely to happen and even if it does, the code would
just mostly fail safely, so there was no attempt either to detect it or
prevent it by the code, which is something that might change in the future,
based on expected user feedback.
Reported-by: Guy Maurel <guy.j@maurel.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Randall Becker <rsbecker@nexbridge.com> Helped-by: Phillip Wood <phillip.wood123@gmail.com> Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: regression git needs safe.directory when using sudo
Originally reported after release of v2.35.2 (and other maint branches)
for CVE-2022-24765 and blocking otherwise harmless commands that were
done using sudo in a repository that was owned by the user.
Add a new test script with very basic support to allow running git
commands through sudo, so a reproduction could be implemented and that
uses only `git status` as a proxy of the issue reported.
Note that because of the way sudo interacts with the system, a much
more complete integration with the test framework will require a lot
more work and that was therefore intentionally punted for now.
The current implementation requires the execution of a special cleanup
function which should always be kept as the last "test" or otherwise
the standard cleanup functions will fail because they can't remove
the root owned directories that are used. This also means that if
failures are found while running, the specifics of the failure might
not be kept for further debugging and if the test was interrupted, it
will be necessary to clean the working directory manually before
restarting by running:
The test file also uses at least one initial "setup" test that creates
a parallel execution directory under the "root" sub directory, which
should be used as top level directory for all repositories that are
used in this test file. Unlike all other tests the repository provided
by the test framework should go unused.
Special care should be taken when invoking commands through sudo, since
the environment is otherwise independent from what the test framework
setup and might have changed the values for HOME, SHELL and dropped
several relevant environment variables for your test. Indeed `git status`
was used as a proxy because it doesn't even require commits in the
repository to work and usually doesn't require much from the environment
to run, but a future patch will add calls to `git init` and that will
fail to honor the default branch name, unless that setting is NOT
provided through an environment variable (which means even a CI run
could fail that test if enabled incorrectly).
A new SUDO prerequisite is provided that does some sanity checking
to make sure the sudo command that will be used allows for passwordless
execution as root without restrictions and doesn't mess with git's
execution path. This matches what is provided by the macOS agents that
are used as part of GitHub actions and probably nowhere else.
Most of those characteristics make this test mostly only suitable for
CI, but it might be executed locally if special care is taken to provide
for all of them in the local configuration and maybe making use of the
sudo credential cache by first invoking sudo, entering your password if
needed, and then invoking the test with:
If it fails to run, then it means your local setup wouldn't work for the
test because of the configuration sudo has or other system settings, and
things that might help are to comment out sudo's secure_path config, and
make sure that the account you are using has no restrictions on the
commands it can run through sudo, just like is provided for the user in
the CI.
For example (assuming a username of marta for you) something probably
similar to the following entry in your /etc/sudoers (or equivalent) file:
marta ALL=(ALL:ALL) NOPASSWD: ALL
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Phillip Wood <phillip.wood123@gmail.com> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 12 May 2022 23:43:37 +0000 (23:43 +0000)]
MyFirstContribution: drop PR description for GGG single-patch contributions
By default, GitHub prefills the PR description using the commit message
for single-commit PRs. This results in a duplicate commit message below
the three-dash line if the contributor does not empty out the PR
description before submitting, which adds noise for reviewers.
Add a note to that effect in MyFirstContribution.txt.
This partly addresses:
https://github.com/gitgitgadget/gitgitgadget/issues/340
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 12 May 2022 23:43:36 +0000 (23:43 +0000)]
MyFirstContribution: reference "The cover letter" in GitGitGadget section
The "Sending Patches via GitGitGadget" section mentions that the PR
title and description will be used as the cover letter, but does not
explain what is a cover letter or what should be included in it.
Refer readers to the new "The cover letter" section added in a previous
commit.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 12 May 2022 23:43:35 +0000 (23:43 +0000)]
MyFirstContribution: reference "The cover letter" in "Preparing Email"
The previous commit added a standalone section on the purpose of the
cover letter, drawing inspiration from the existing content of the
"Preparing Email" section.
Adjust "Preparing Email" to reference "The cover letter", to avoid
content duplication.
Also, use the imperative mode for the cover letter subject, as is done
in "The cover letter".
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 12 May 2022 23:43:34 +0000 (23:43 +0000)]
MyFirstContribution: add standalone section on cover letter
An explanation of the purpose of the cover letter is included in the
"Sending Patches with git send-email" / "Preparing Email" section but is
missing from the "Sending Patches via GitGitGadget" section.
Add a standalone section "The cover letter" under the "Getting Started:
Anatomy of a Patch Series" header to explain what the cover letter is
used for and to draft the cover letter of the 'psuh' topic used in the
tutorial.
For now we mostly copy content from the "Sending Patches with git
send-email" section but do not adjust that section, nor the GGG section,
to reference the new section. This is done in following commits.
Also, adjust the "Preparing Email" Asciidoc anchor to avoid conflicts.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 12 May 2022 23:43:33 +0000 (23:43 +0000)]
MyFirstContribution: add "Anatomy of a Patch Series" section
Before describing how to send patches to the mailing list either with
GitGitGadget or 'git send-email', the MyFirstContribution tutorial
includes a small "Getting Ready to Share" section where the two
different methods are briefly introduced.
Use this section to also describe what a patch series looks like once
submitted, so that readers get an understanding of the end result before
diving into how to accomplish that end result.
Start by copying the "thread overview" section of a recent contribution
from the public-inbox web UI and explaining how each commit is a
separate mail, and point out the cover letter.
Subsequent commits will move the existing description of the purpose of
the cover letter from the 'git send-email' section to this "anatomy"
section.
Also, change the wording in the introductory paragraph to use
"contributions" instead of "patches", since this makes more sense when
talking about GitHub pull requests.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 12 May 2022 22:51:07 +0000 (15:51 -0700)]
commit: fix "author_ident" leak
Since 4c28e4ada03 (commit: die before asking to edit the log
message, 2010-12-20), we have been "leaking" the "author_ident" when
prepare_to_commit() fails. Instead of returning from right there,
introduce an exit status variable and jump to the clean-up label
at the end.
Instead of explicitly releasing the resource with strbuf_release(),
mark the variable with UNLEAK() at the end, together with two other
variables that are already marked as such. If this were in a
utility function that is called number of times, but these are
different, we should explicitly release resources that grow
proportionally to the size of the problem being solved, but
cmd_commit() is like main() and there is no point in spending extra
cycles to release individual pieces of resource at the end, just
before process exit will clean everything for us for free anyway.
This fixes a leak demonstrated by e.g. "t3505-cherry-pick-empty.sh",
but unfortunately we cannot mark it or other affected tests as passing
now with "TEST_PASSES_SANITIZE_LEAK=true" as we'll need to fix many
other memory leaks before doing so.
Incidentally there are two tests that always passes the leak checker
with or without this change. Mark them as such.
This is based on an earlier patch by Ævar, but takes a different
approach that is more maintainable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ci: use https, not http to download binaries from perforce.com
Since 522354d70f4 (Add Travis CI support, 2015-11-27) the CI has used
http://filehost.perforce.com/perforce/ to download binaries from
filehost.perforce.com, they were then moved to this script in 657343a602e (travis-ci: move Travis CI code into dedicated scripts,
2017-09-10).
Let's use https instead for good measure. I don't think we need to
worry about the DNS or network between the GitHub CI and perforce.com
being MitM'd, but using https gives us extra validation of the payload
at least, and is one less thing to worry about when checking where
else we rely on non-TLS'd http connections.
Also, use the same download site at perforce.com for Linux and macOS
tarballs for consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ci: reintroduce prevention from perforce being quarantined in macOS
5ed9fc3fc86 (ci: prevent `perforce` from being quarantined, 2020-02-27)
introduces this prevention for brew, but brew has been removed in a
previous commit, so reintroduce an equivalent option to avoid a possible
regression.
This doesn't affect github actions (as configure now) and is therefore
done silently to avoid any possible scary irrelevant messages.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perfoce's cask in brew is meant[1] to be used only by humans, so replace
its use from the CI with a scripted binary download which is less likely
to fail, as it is done in Linux.
Kept the logic together so it will be less likely to break when moved
around as on the fly code changes in this area are settled, at which
point it will also feasable to ammend it to avoid some of the hardcoded
values by using similar variables to the ones Linux does.
In that same line, a POSIX sh syntax is used instead of the similar one
used in Linux in preparation for an unrelated future change that might
change the shell currently configured for it.
This change reintroduces the risk that the installed binaries might not
work because of being quarantined that was fixed with 5ed9fc3fc86 (ci:
prevent `perforce` from being quarantined, 2020-02-27) but fixing that
now was also punted for simplicity and since the affected cloud provider
is scheduled to be retired with an on the fly change, but should be
addressed if that other change is not integrated further.
The discussion on the need to keep 2 radically different versions of
the binaries to be tested with Linux vs macOS or how to upgrade to
newer versions now that brew won't do that automatically for us has
been punted for now as well. On that line the now obsolete comment
about it in lib.sh was originally being updated by this change but
created conflicts as it is moved around by other on the fly changes,
so will be addressed independently as well.
ci: make failure to find perforce more user friendly
In preparation for a future change that will make perforce installation
optional in macOS, make sure that the check for it is done without
triggering scary looking errors and add a user friendly message instead.
All other existing uses of 'type <cmd>' in our shell scripts that
check the availability of a command <cmd> send both standard output
and error stream to /dev/null to squelch "<cmd> not found" diagnostic
output, but this script left the standard error stream shown.
Redirect it just like everybody else to squelch this error message that
we fully expect to see.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix code added in 8d84097f965 (commit-graph: expire commit-graph
files, 2019-06-18) to check the return value of the stat() system
call. Not doing so caused us to use uninitialized memory in the "Bloom
generation is limited by --max-new-filters" test in
t4216-log-bloom.sh:
+ rm -f trace.event
+ pwd
+ GIT_TRACE2_EVENT=[...]/t/trash directory.t4216-log-bloom/limits/trace.event git commit-graph write --reachable --split=replace --changed-paths --max-new-filters=2
==24835== Syscall param utimensat(times[0].tv_sec) points to uninitialised byte(s)
==24835== at 0x499E65A: __utimensat64_helper (utimensat.c:34)
==24835== by 0x4999142: utime (utime.c:36)
==24835== by 0x552BE0: mark_commit_graphs (commit-graph.c:2213)
==24835== by 0x550822: write_commit_graph (commit-graph.c:2424)
==24835== by 0x54E3A0: write_commit_graph_reachable (commit-graph.c:1681)
==24835== by 0x4374BB: graph_write (commit-graph.c:269)
==24835== by 0x436F7D: cmd_commit_graph (commit-graph.c:326)
==24835== by 0x407B9A: run_builtin (git.c:465)
==24835== by 0x406651: handle_builtin (git.c:719)
==24835== by 0x407575: run_argv (git.c:786)
==24835== by 0x406410: cmd_main (git.c:917)
==24835== by 0x511F09: main (common-main.c:56)
==24835== Address 0x1ffeffde70 is on thread 1's stack
==24835== in frame #1, created by utime (utime.c:25)
==24835== Uninitialised value was created by a stack allocation
==24835== at 0x552B50: mark_commit_graphs (commit-graph.c:2201)
==24835==
[...]
error: last command exited with $?=126
not ok 137 - Bloom generation is limited by --max-new-filters
This would happen as we stat'd the non-existing
".git/objects/info/commit-graph" file. Let's fix mark_commit_graphs()
to check the stat()'s return value, and while we're at it fix another
case added in the same commit to do the same.
The caller in expire_commit_graphs() would have been less likely to
run into this, as it's operating on files it just got from readdir(),
but it could still happen due to a race with e.g. a concurrent "rm
-rf" of the commit-graph files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file: fix a unpack_loose_header() regression in 3b6a8db3b03
Fix a regression in my 3b6a8db3b03 (object-file.c: use "enum" return
type for unpack_loose_header(), 2021-10-01) revealed both by running
the test suite with --valgrind, and with the amended "git fsck" test.
In practice this regression in v2.34.0 caused us to claim that we
couldn't parse the header, as opposed to not being able to unpack
it. Before the change in the C code the test_cmp added here would emit:
I.e. we'd proceed to call parse_loose_header() on the uninitialized
"hdr" value, and it would have been very unlikely for that
uninitialized memory to be a valid git object.
The other callers of unpack_loose_header() were already checking the
enum values exhaustively. See 3b6a8db3b03 and 5848fb11acd (object-file.c: return ULHR_TOO_LONG on "header too long",
2021-10-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
log test: skip a failing mkstemp() test under valgrind
Skip a test added in f1e3df31699 (t: increase test coverage of
signature verification output, 2020-03-04) when running under
valgrind. Due to valgrind's interception of mkstemp() this test will
fail with:
+ pwd
+ TMPDIR=[...]/t/trash directory.t4202-log/bogus git log --show-signature -n1 plain-fail
==7696== VG_(mkstemp): failed to create temp file: [...]/t/trash directory.t4202-log/bogus/valgrind_proc_7696_cmdline_d545ddcf
[... 10 more similar lines omitted ..]
valgrind: Startup or configuration error:
valgrind: Can't create client cmdline file in [...]/t/trash directory.t4202-log/bogus/valgrind_proc_7696_cmdline_6e542d1d
valgrind: Unable to start up properly. Giving up.
error: last command exited with $?=1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
Fix a regression in b7d11a0f5d2 (tests: exercise the RUNTIME_PREFIX
feature, 2021-07-24) where tests that want to set up and test a "git"
wrapper in $PATH conflicted with the t/bin/valgrind wrapper(s) doing
the same.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 12 May 2022 21:31:09 +0000 (14:31 -0700)]
archive: do not let on-disk mode leak to zip archives
When the "--add-file" option is used to add the contents from an
untracked file to the archive, the permission mode bits for these
files are sent to the archive-backend specific "write_entry()"
method as-is. We normalize the mode bits for tracked files way
before we pass them to the write_entry() method; we should do the
same here.
This is not strictly needed for "tar" archive-backend, as it has its
own code to further clean them up, but "zip" archive-backend is not
so well prepared.
Glen Choo [Tue, 10 May 2022 19:25:47 +0000 (19:25 +0000)]
pull: do not let submodule.recurse override fetch.recurseSubmodules
Fix a bug in "git pull" where `submodule.recurse` is preferred over
`fetch.recurseSubmodules` when performing a fetch
(Documentation/config/fetch.txt says that `fetch.recurseSubmodules`
should be preferred.). Do this by passing the value of the
"--recurse-submodules" CLI option to the underlying fetch, instead of
passing a value that combines the CLI option and config variables.
In other words, this bug occurred because builtin/pull.c is conflating
two similar-sounding, but different concepts:
- Whether "git pull" itself should care about submodules e.g. whether it
should update the submodule worktrees after performing a merge.
- The value of "--recurse-submodules" to pass to the underlying "git
fetch".
Thus, when `submodule.recurse` is set, the underlying "git fetch" gets
invoked with "--recurse-submodules[=value]", overriding the value of
`fetch.recurseSubmodules`.
An alternative (and more obvious) approach to fix the bug would be to
teach "git pull" to understand `fetch.recurseSubmodules`, but the
proposed solution works better because:
- We don't maintain two identical config-parsing implementions in "git
pull" and "git fetch".
- It works better with other commands invoked by "git pull" e.g. "git
merge" won't accidentally respect `fetch.recurseSubmodules`.
Reported-by: Huang Zou <huang.zou@schrodinger.com> Helped-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Chris Down [Wed, 11 May 2022 18:00:09 +0000 (19:00 +0100)]
bisect: output state before we are ready to compute bisection
Commit 73c6de06aff8 ("bisect: don't use invalid oid as rev when
starting") changes the behaviour of `git bisect` to consider invalid
oids as pathspecs again, as in the old shell implementation.
While that behaviour may be desirable, it can also cause confusion. For
example, while bisecting in a particular repo I encountered this:
...which led to me sitting for a few moments, wondering why there's no
printout stating the first rev to check.
It turns out that the tag was actually "6.3", not "v6.3", and thus the
bisect was still silently started with only a bad rev, because d93ff48803f0 was a valid oid and "v6.3" was silently considered to be a
pathspec.
While this behaviour may be desirable, it can be confusing, especially
with different repo conventions either using or not using "v" before
release names, or when a branch name or tag is simply misspelled on the
command line.
In order to avoid situations like this, make it more clear what we're
waiting for:
$ git bisect start d93ff48803f0 v6.3
status: waiting for good commit(s), bad commit known
We already have good output once the bisect process has begun in
earnest, so we don't need to do anything more there.
Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
halilsen [Sun, 20 Feb 2022 19:47:36 +0000 (19:47 +0000)]
gitk: include y coord in recorded sash position
6cd80496e9 ("gitk: Resize panes correctly when reducing window size",
2020-10-03) introduces a mechanism to record previously-set sash
positions to make sure that correct values are used while computing
resize proportions. However, if we are not using ttk, then sash
represents only the x coordinate and the recorded sash (`oldsash`) only
includes the x coordinate. When we need to access the y coordinate via
the recorded sash position, we generate the following Application Error
popup:
Error: expected integer but got ""
expected integer but got ""
expected integer but got ""
while executing
"$win sash place 0 $sash0 [lindex $s0 1]"
(procedure "resizeclistpanes" line 38)
invoked from within
"resizeclistpanes .tf.histframe.pwclist 2818"
(command bound to event)
To fix this, if we are not using ttk, we append the sash positions with
the y coordinates before recording them to match the use_ttk case.
Signed-off-by: Halil Sen <halil.sen@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Junio C Hamano [Wed, 11 May 2022 00:41:11 +0000 (17:41 -0700)]
Merge branch 'fr/vimdiff-layout'
Reimplement "vimdiff[123]" mergetool drivers with a more generic
layout mechanism.
* fr/vimdiff-layout:
mergetools: add description to all diff/merge tools
vimdiff: add tool documentation
vimdiff: integrate layout tests in the unit tests framework ('t' folder)
vimdiff: new implementation with layout support
Junio C Hamano [Wed, 11 May 2022 00:41:11 +0000 (17:41 -0700)]
Merge branch 'jh/p4-various-fixups'
Various cleanups to "git p4".
* jh/p4-various-fixups: (22 commits)
git-p4: sort imports
git-p4: seperate multiple statements onto seperate lines
git-p4: move inline comments to line above
git-p4: only seperate code blocks by a single empty line
git-p4: compare to singletons with "is" and "is not"
git-p4: normalize indentation of lines in conditionals
git-p4: ensure there is a single space around all operators
git-p4: ensure every comment has a single #
git-p4: remove spaces between dictionary keys and colons
git-p4: remove redundant backslash-continuations inside brackets
git-p4: remove extraneous spaces before function arguments
git-p4: place a single space after every comma
git-p4: removed brackets when assigning multiple return values
git-p4: remove spaces around default arguments
git-p4: remove padding from lists, tuples and function arguments
git-p4: sort and de-duplcate pylint disable list
git-p4: remove commented code
git-p4: convert descriptive class and function comments into docstrings
git-p4: improve consistency of docstring formatting
git-p4: indent with 4-spaces
...
Junio C Hamano [Wed, 11 May 2022 00:41:10 +0000 (17:41 -0700)]
Merge branch 'tk/untracked-cache-with-uall'
The performance of the "untracked cache" feature has been improved
when "--untracked-files=<mode>" and "status.showUntrackedFiles"
are combined.
* tk/untracked-cache-with-uall:
untracked-cache: support '--untracked-files=all' if configured
untracked-cache: test untracked-cache-bypassing behavior with -uall
Victoria Dye [Tue, 10 May 2022 23:32:32 +0000 (23:32 +0000)]
unpack-trees: preserve index sparsity
When unpacking trees, set the default sparsity of the resultant index based
on repo settings and 'is_sparse_index_allowed()'.
Normally, when executing 'unpack_trees', the output index is marked sparse
when (and only when) it unpacks a sparse directory. However, an index may be
"sparse" even if it contains no sparse directories - when all files fall
inside the sparse-checkout definition or otherwise have SKIP_WORKTREE
disabled. Therefore, the output index may be marked "full" even when it is
"sparse", resulting in unnecessary 'ensure_full_index' calls when writing to
disk. Avoid this by setting the "default" index sparsity to match what is
expected for the repository.
As a consequence of this fix, the (non-merge) 'read-tree' performed when
applying a stash with untracked files no longer expands the index. Update
the corresponding test in 't1092'.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 10 May 2022 23:32:31 +0000 (23:32 +0000)]
stash: apply stash using 'merge_ort_nonrecursive()'
Update 'stash' to use 'merge_ort_nonrecursive()' to apply a stash to the
current working tree. When 'git stash apply' was converted from its shell
script implementation to a builtin in 8a0fc8d19d (stash: convert apply to
builtin, 2019-02-25), 'merge_recursive_generic()' was used to merge a stash
into the working tree as part of 'git stash (apply|pop)'. However, with the
single merge base used in 'do_apply_stash()', the commit wrapping done by
'merge_recursive_generic()' is not only unnecessary, but misleading (the
*real* merge base is labeled "constructed merge base"). Therefore, a
non-recursive merge of the working tree, stashed tree, and stash base tree
is more appropriate.
There are two options for a non-recursive merge-then-update-worktree
function: 'merge_trees()' and 'merge_ort_nonrecursive()'. Use
'merge_ort_nonrecursive()' to align with the default merge strategy used by
'git merge' (6a5fb96672 (Change default merge backend from recursive to ort,
2021-08-04)) and, because merge-ort does not operate in-place on the index,
avoid unnecessary index expansion. Update tests in 't1092' verifying index
expansion for 'git stash' accordingly.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 10 May 2022 23:32:30 +0000 (23:32 +0000)]
read-cache: set sparsity when index is new
When the index read in 'do_read_index()' does not exist on-disk, mark the
index "sparse" if the executing command does not require a full index and
sparse index is otherwise enabled.
Some commands (such as 'git stash -u') implicitly create a new index (when
the 'GIT_INDEX_FILE' variable points to a non-existent file) and perform
some operation on it. However, when this index is created, it isn't created
with the same sparsity settings as the repo index. As a result, while these
indexes may be sparse during the operation, they are always expanded before
being written to disk. We can avoid that expansion by defaulting the index
to "sparse", in which case it will only be expanded if the full index is
needed.
Note that the function 'set_new_index_sparsity()' is created despite having
only a single caller because additional callers will be added in a
subsequent patch.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 10 May 2022 23:32:29 +0000 (23:32 +0000)]
sparse-index: expose 'is_sparse_index_allowed()'
Expose 'is_sparse_index_allowed()' publicly so that it may be used by
callers outside of 'sparse-index.c'. While no such callers exist yet, it
will be used in a subsequent commit.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 10 May 2022 23:32:28 +0000 (23:32 +0000)]
stash: integrate with sparse index
Enable sparse index in 'git stash' by disabling
'command_requires_full_index'.
With sparse index enabled, some subcommands of 'stash' work without
expanding the index, e.g., 'git stash', 'git stash list', 'git stash drop',
etc. Others ensure the index is expanded either directly (as in the case of
'git stash [pop|apply]', where the call to 'merge_recursive_generic()' in
'do_apply_stash()' triggers the expansion), or in a command called
internally by stash (e.g., 'git update-index' in 'git stash -u'). So, in
addition to enabling sparse index, add tests to 't1092' demonstrating which
variants of 'git stash' expand the index, and which do not.
Finally, add the option to skip writing 'untracked.txt' in
'ensure_not_expanded', and use that option to successfully apply stashed
untracked files without a conflict in 'untracked.txt'.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests verifying expected 'git stash' behavior in
't1092-sparse-checkout-compatibility'. These cases establish the expected
behavior of 'git stash' in a sparse-checkout and verify consistency both
with and without a sparse index. Although no sparse index compatibility has
been integrated into 'git stash' yet, the tests are all 'expect_success' -
we don't want the cone-mode sparse-checkout behavior to change depending on
whether it is using a sparse index or not. Therefore, we expect these tests
to continue passing once sparse index is integrated with 'git stash'.
Additionally, add performance test cases for 'git stash' both with and
without untracked files. Note that, unlike the other tests in
'p2000-sparse-operations.sh', the tests added for 'stash' are combination
operations. This is done to ensure the stash/unstash is not blocked by the
modification of '$SPARSE_CONE/a' performed as part of 'test_perf_on_all'.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/remote.c: teach `-v` to list filters for promisor remotes
`git remote -v` (`--verbose`) lists down the names of remotes along with
their URLs. It would be beneficial for users to also specify the filter
types for promisor remotes. Something like this -
detect-compiler: make detection independent of locale
`detect-compiler` has accumulated a few compiler dependent workarounds
lately for the more and more ubiquitious gcc12. This is intended to make
CI set-ups work across tool-chain updates, but also help those
developers who build with `DEVELOPER=1`.
Alas, `detect-compiler` uses the locale dependent output of `$(CC) -v`
to parse for the version string, which fails unless it literally
contains ` version`.
Use `LANG=C $(CC) -v` instead to grep for stable output.
Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 5 May 2022 21:36:25 +0000 (14:36 -0700)]
Merge branch 'rs/format-patch-pathspec-fix' into maint
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
source: <c36896a1-6247-123b-4fa3-b7eb24af1897@web.de>
Junio C Hamano [Thu, 5 May 2022 21:36:25 +0000 (14:36 -0700)]
Merge branch 'rs/fast-export-pathspec-fix' into maint
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
source: <2c988c7b-0efe-4222-4a43-8124fe1a9da6@web.de>
Junio C Hamano [Thu, 5 May 2022 21:36:24 +0000 (14:36 -0700)]
Merge branch 'jc/show-pathspec-fix' into maint
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
source: <xmqqo80j87g0.fsf_-_@gitster.g>
Junio C Hamano [Thu, 5 May 2022 21:36:24 +0000 (14:36 -0700)]
Merge branch 'jc/diff-tree-stdin-fix' into maint
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <xmqq7d7bsu2n.fsf@gitster.g>
Tao Klerks [Sat, 30 Apr 2022 19:26:52 +0000 (19:26 +0000)]
git-p4: improve encoding handling to support inconsistent encodings
git-p4 is designed to run correctly under python2.7 and python3, but
its functional behavior wrt importing user-entered text differs across
these environments:
Under python2, git-p4 "naively" writes the Perforce bytestream into git
metadata (and does not set an "encoding" header on the commits); this
means that any non-utf-8 byte sequences end up creating invalidly-encoded
commit metadata in git.
Under python3, git-p4 attempts to decode the Perforce bytestream as utf-8
data, and fails badly (with an unhelpful error) when non-utf-8 data is
encountered.
Perforce clients (especially p4v) encourage user entry of changelist
descriptions (and user full names) in OS-local encoding, and store the
resulting bytestream to the server unmodified - such that different
clients can end up creating mutually-unintelligible messages. The most
common inconsistency, in many Perforce environments, is likely to be utf-8
(typical in linux) vs cp-1252 (typical in windows).
Make the changelist-description- and user-fullname-handling code
python-runtime-agnostic, introducing three "strategies" selectable via
config:
- 'passthrough', behaving as previously under python2,
- 'strict', behaving as previously under python3, and
- 'fallback', favoring utf-8 but supporting a secondary encoding when
utf-8 decoding fails, and finally escaping high-range bytes if the
decoding with the secondary encoding also fails.
Keep the python2 default behavior as-is ('legacy' strategy), but switch
the python3 default strategy to 'fallback' with default fallback encoding
'cp1252'.
Also include tests exercising these encoding strategies, documentation for
the new config, and improve the user-facing error messages when decoding
does fail.
Signed-off-by: Tao Klerks <tao@klerks.biz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path taken by "git multi-pack-index" command from the end user
was compared with path internally prepared by the tool withut first
normalizing, which lead to duplicated paths not being noticed,
which has been corrected.
* ds/midx-normalize-pathname-before-comparison:
cache: use const char * for get_object_directory()
multi-pack-index: use --object-dir real path
midx: use real paths in lookup_multi_pack_index()
Junio C Hamano [Sun, 1 May 2022 05:00:30 +0000 (22:00 -0700)]
cocci: drop bogus xstrdup_or_null() rule
13092a91 (cocci: refactor common patterns to use xstrdup_or_null(),
2016-10-12) introduced a rule to rewrite this conditional call to
xstrdup(E) and an assignment to variable V:
- if (E)
- V = xstrdup(E);
into an unconditional call to xstrdup_or_null(E) and an assignment
to variable V:
+ V = xstrdup_or_null(E);
which is utterly bogus. The original code may already have an
acceptable value in V and the conditional assignment may be to
improve the value already in V with a copy of a better value E when
(and only when) E is not NULL.
The rewritten construct unconditionally discards the existing value
of V and replaces it with a copy of E, even when E is NULL, which
changes the meaning of the program.
By the way, if it were
-if (E && !V)
- V = xstrdup(E);
+V = xstrdup_or_null(E);
it would probably have been correct. But there is no existing code
that would have been improved by such a rule, so let's just remove
the bogus one without replacing with the more specific one.
Junio C Hamano [Sun, 1 May 2022 05:17:15 +0000 (22:17 -0700)]
clone: plug a miniscule leak
The remote_name variable is first assigned a copy of the value of
the "clone.defaultremotename" configuration variable and then by the
value of the "--origin" command line option. The former is prepared
to see multiple instances of the configuration variable by freeing
the current value of the variable before a copy of the newly
discovered value gets assigned to it. The latter however blindly
assigned a copy of the new value to the variable, thereby leaking
the value read from the configuration variable.
René Scharfe [Sat, 30 Apr 2022 14:31:43 +0000 (16:31 +0200)]
2.36 fast-export regression fix
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git fast-export doesn't set no_free, so path limiting stopped working
after the first commit. Set the flag and add a basic test to make sure
only changes to the specified files are exported.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 30 Apr 2022 10:32:44 +0000 (12:32 +0200)]
2.36 format-patch regression fix
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git format-patch only sets no_free when --output is given, causing it to
forget pathspecs after the first commit. Set no_free unconditionally
instead.
The existing test was unable to detect this breakage because it checks
stderr for the absence of a certain string, but format-patch writes to
stdout. Also the test was not checking the case of one commit modifying
multiple files and a pathspec limiting the diff. Replace it with a more
thorough one.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 30 Apr 2022 05:29:51 +0000 (22:29 -0700)]
2.36 show regression fix
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
e900d494 (diff: add an API for deferred freeing, 2021-02-11)
introduced a mechanism to delay freeing resources held in
diff_options struct that need to be kept as long as the struct will
be reused to compute diff. "git log -p" was taught to utilize the
mechanism but it was done with an incorrect assumption that the
underlying helper function, cmd_log_walk(), is called only once,
and it is OK to do the freeing at the end of it.
Alas, for "git show A B", the function is called once for each
commit given, so it is not OK to free the resources until we finish
calling it for all the commits given from the command line.
During 2.36 release cycle, we started clearing the <pathspec> as
part of this freeing, which made the bug a lot more visible.
Fix this breakage by tweaking how cmd_log_walk() frees the resources
at the end and using a variant of it that does not immediately free
the resources to show each commit object from the command line in
"git show".
Protect the fix with a few new tests.
Reported-by: Daniel Li <dan@danielyli.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tao Klerks [Fri, 29 Apr 2022 09:56:46 +0000 (09:56 +0000)]
push: new config option "push.autoSetupRemote" supports "simple" push
In some "simple" centralized workflows, users expect remote tracking
branch names to match local branch names. "git push" pushes to the
remote version/instance of the branch, and "git pull" pulls any changes
to the remote branch (changes made by the same user in another place, or
by other users).
This expectation is supported by the push.default default option "simple"
which refuses a default push for a mismatching tracking branch name, and
by the new branch.autosetupmerge option, "simple", which only sets up
remote tracking for same-name remote branches.
When a new branch has been created by the user and has not yet been
pushed (and push.default is not set to "current"), the user is prompted
with a "The current branch %s has no upstream branch" error, and
instructions on how to push and add tracking.
This error is helpful in that following the advice once per branch
"resolves" the issue for that branch forever, but inconvenient in that
for the "simple" centralized workflow, this is always the right thing to
do, so it would be better to just do it.
Support this workflow with a new config setting, push.autoSetupRemote,
which will cause a default push, when there is no remote tracking branch
configured, to push to the same-name on the remote and --set-upstream.
Also add a hint offering this new option when the "The current branch %s
has no upstream branch" error is encountered, and add corresponding tests.
Signed-off-by: Tao Klerks <tao@klerks.biz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tao Klerks [Fri, 29 Apr 2022 09:56:45 +0000 (09:56 +0000)]
push: default to single remote even when not named origin
With "push.default=current" configured, a simple "git push" will push to
the same-name branch on the current branch's branch.<name>.pushRemote, or
remote.pushDefault, or origin. If none of these are defined, the push will
fail with error "fatal: No configured push destination".
The same "default to origin if no config" behavior applies with
"push.default=matching".
Other commands use "origin" as a default when there are multiple options,
but default to the single remote when there is only one - for example,
"git checkout <something>". This "assume the single remote if there is
only one" behavior is more friendly/useful than a defaulting behavior
that only uses the name "origin" no matter what.
Update "git push" to also default to the single remote (and finally fall
back to "origin" as default if there are several), for
"push.default=current" and for other current and future remote-defaulting
push behaviors.
This change also modifies the behavior of ls-remote in a consistent way,
so defaulting not only supplies 'origin', but any single configured remote
also.
Document the change in behavior, correct incorrect assumptions in related
tests, and add test cases reflecting this new single-remote-defaulting
behavior.
Signed-off-by: Tao Klerks <tao@klerks.biz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tao Klerks [Fri, 29 Apr 2022 09:56:44 +0000 (09:56 +0000)]
branch: new autosetupmerge option 'simple' for matching branches
With the default push.default option, "simple", beginners are
protected from accidentally pushing to the "wrong" branch in
centralized workflows: if the remote tracking branch they would push
to does not have the same name as the local branch, and they try to do
a "default push", they get an error and explanation with options.
There is a particular centralized workflow where this often happens:
a user branches to a new local topic branch from an existing
remote branch, eg with "checkout -b feature1 origin/master". With
the default branch.autosetupmerge configuration (value "true"), git
will automatically add origin/master as the upstream tracking branch.
When the user pushes with a default "git push", with the intention of
pushing their (new) topic branch to the remote, they get an error, and
(amongst other things) a suggestion to run "git push origin HEAD".
If they follow this suggestion the push succeeds, but on subsequent
default pushes they continue to get an error - so eventually they
figure out to add "-u" to change the tracking branch, or they spelunk
the push.default config doc as proposed and set it to "current", or
some GUI tooling does one or the other of these things for them.
When one of their coworkers later works on the same topic branch,
they don't get any of that "weirdness". They just "git checkout
feature1" and everything works exactly as they expect, with the shared
remote branch set up as remote tracking branch, and push and pull
working out of the box.
The "stable state" for this way of working is that local branches have
the same-name remote tracking branch (origin/feature1 in this
example), and multiple people can work on that remote feature branch
at the same time, trusting "git pull" to merge or rebase as required
for them to be able to push their interim changes to that same feature
branch on that same remote.
(merging from the upstream "master" branch, and merging back to it,
are separate more involved processes in this flow).
There is a problem in this flow/way of working, however, which is that
the first user, when they first branched from origin/master, ended up
with the "wrong" remote tracking branch (different from the stable
state). For a while, before they pushed (and maybe longer, if they
don't use -u/--set-upstream), their "git pull" wasn't getting other
users' changes to the feature branch - it was getting any changes from
the remote "master" branch instead (a completely different class of
changes!)
An experienced git user might say "well yeah, that's what it means to
have the remote tracking branch set to origin/master!" - but the
original user above didn't *ask* to have the remote master branch
added as remote tracking branch - that just happened automatically
when they branched their feature branch. They didn't necessarily even
notice or understand the meaning of the "set up to track 'origin/master'"
message when they created the branch - especially if they are using a
GUI.
Looking at how to fix this, you might think "OK, so disable auto setup
of remote tracking - set branch.autosetupmerge to false" - but that
will inconvenience the *second* user in this story - the one who just
wanted to start working on the topic branch. The first and second
users swap roles at different points in time of course - they should
both have a sane configuration that does the right thing in both
situations.
Make this "branches have the same name locally as on the remote"
workflow less painful / more obvious by introducing a new
branch.autosetupmerge option called "simple", to match the same-name
"push.default" option that makes similar assumptions.
This new option automatically sets up tracking in a *subset* of the
current default situations: when the original ref is a remote tracking
branch *and* has the same branch name on the remote (as the new local
branch name).
Update the error displayed when the 'push.default=simple' configuration
rejects a mismatching-upstream-name default push, to offer this new
branch.autosetupmerge option that will prevent this class of error.
With this new configuration, in the example situation above, the first
user does *not* get origin/master set up as the tracking branch for
the new local branch. If they "git pull" in their new local-only
branch, they get an error explaining there is no upstream branch -
which makes sense and is helpful. If they "git push", they get an
error explaining how to push *and* suggesting they specify
--set-upstream - which is exactly the right thing to do for them.
This new option is likely not appropriate for users intentionally
implementing a "triangular workflow" with a shared upstream tracking
branch, that they "git pull" in and a "private" feature branch that
they push/force-push to just for remote safe-keeping until they are
ready to push up to the shared branch explicitly/separately. Such
users are likely to prefer keeping the current default
merge.autosetupmerge=true behavior, and change their push.default to
"current".
Also extend the existing branch tests with three new cases testing
this option - the obvious matching-name and non-matching-name cases,
and also a non-matching-ref-type case. The matching-name case needs to
temporarily create an independent repo to fetch from, as the general
strategy of using the local repo as the remote in these tests
precludes locally branching with the same name as in the "remote".
Signed-off-by: Tao Klerks <tao@klerks.biz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 28 Apr 2022 17:46:04 +0000 (10:46 -0700)]
Merge branch 'jc/diff-tree-stdin-fix'
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
SZEDER Gábor [Wed, 27 Apr 2022 17:06:49 +0000 (19:06 +0200)]
safe.directory: document and check that it's ignored in the environment
The description of 'safe.directory' mentions that it's respected in
the system and global configs, and ignored in the repository config
and on the command line, but it doesn't mention whether it's respected
or ignored when specified via environment variables (nor does the
commit message adding 'safe.directory' [1]).
Clarify that 'safe.directory' is ignored when specified in the
environment, and add tests to make sure that it remains so.
[1] 8959555cee (setup_git_directory(): add an owner check for the
top-level directory, 2022-03-02)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 27 Apr 2022 17:06:48 +0000 (19:06 +0200)]
t0033-safe-directory: check when 'safe.directory' is ignored
According to the documentation 'safe.directory' "is only respected
when specified in a system or global config, not when it is specified
in a repository config or via the command line option -c
safe.directory=<path>".
Add tests to check that 'safe.directory' in the repository config or
on the command line is indeed ignored.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 27 Apr 2022 17:06:47 +0000 (19:06 +0200)]
t0033-safe-directory: check the error message without matching the trash dir
Since 8959555cee (setup_git_directory(): add an owner check for the
top-level directory, 2022-03-02) when git finds itself in a repository
owned by someone else, it aborts with a "fatal: unsafe repository
(<repo path>)" error message and an advice about how to set the
'safe.directory' config variable to mark that repository as safe.
't0033-safe-directory.sh' contains tests that check that this feature
and handling said config work as intended. To ensure that git dies
for the right reason, several of those tests check that its standard
error contains the name of that config variable, but:
- it only appears in the advice part, not in the actual error
message.
- it is interpreted as a regexp by 'grep', so, because of the dot,
it matches the name of the test script and the path of the trash
directory as well. Consequently, these tests could be fooled by
any error message that would happen to include the path of the
test repository.
Tighten these checks to look for "unsafe repository" instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not obvious that the 'git rev-parse' builtin would use the sparse
index, but it is possible to parse paths out of the index using the
":<path>" syntax. The 'git rev-parse' output is only the OID of the
object found at that location, but otherwise behaves similarly to 'git
show :<path>'. This includes the failure conditions on directories and
the error messages depending on whether a path is in the worktree or
not.
The only code change required is to change the
command_requires_full_index setting in builtin/rev-parse.c, and we can
re-use many existing 'git show' tests for the rev-parse case.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git show :<path>' where '<path>' is a directory, then
there is a subtle difference between a full checkout and a sparse
checkout. The error message from diagnose_invalid_index_path() reports
whether the path is on disk or not. The full checkout will have the
directory on disk, but the path will not be in the index. The sparse
checkout could have the directory not exist, specifically when that
directory is outside of the sparse-checkout cone.
In the case of a sparse index, we have yet another state: the path can
be a sparse directory in the index. In this case, the error message from
diagnose_invalid_index_path() would erroneously say "path '<path>' is in
the index, but not at stage 0", which is false.
Add special casing around sparse directory entries so we get to the
correct error message. This requires two checks in order to get parity
with the normal sparse-checkout case.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_oid_with_context_1() method is used when parsing revision
arguments. One particular case is to take a ":<path>" string and search
the index for the given path.
In the case of a sparse index, this might find a sparse directory entry,
in which case the contained object is a tree. In the case of a full
index, this search within the index would fail.
In order to maintain identical return state as in a full index, inspect
the discovered cache entry to see if it is a sparse directory and reject
it. This requires being careful around the only_to_die option to be sure
we die only at the correct time.
This changes the behavior of 'git show :<sparse-dir>', but does not
bring it entirely into alignment with a full index case. It specifically
hits the wrong error message within diagnose_invalid_index_path(). That
error message will be corrected in a future change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git show' command can take an input to request the state of an
object in the index. This can lead to parsing the index in order to load
a specific file entry. Without the change presented here, a sparse index
would expand to a full one, taking much longer than usual to access a
simple file.
There is one behavioral change that happens here, though: we now can
find a sparse directory entry within the index! Commands that previously
failed because we could not find an entry in the worktree or index now
succeed because we _do_ find an entry in the index.
There might be more work to do to make other situations succeed when
looking for an indexed tree, perhaps by looking at or updating the
cache-tree extension as needed. These situations include having a full
index or asking for a directory that is within the sparse-checkout cone
(and hence is not a sparse directory entry in the index).
For now, we demonstrate how the sparse index integration is extremely
simple for files outside of the cone as well as directories within the
cone. A later change will resolve this behavior around sparse
directories.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
