ASoC: es8311: Fix clock leak and check update_bits in set_bias_level()
In es8311_set_bias_level(), the return value of
snd_soc_component_update_bits() was ignored. If this fails, not only
is the VMID selection not applied, but the previously enabled mclk
is left running, leading to an unbalanced clock reference count
(clock leak).
Check the return value and ensure clk_disable_unprepare() is called on
failure to maintain proper resource management.
ASoC: es8311: Check regcache_sync() error in resume
The es8311_resume() function currently ignores the return value of
regcache_sync(). If syncing the cache fails, the function still returns
0, leaving the codec in a potentially incorrect state.
Check the return value and propagate it to the ASoC core to ensure
resume failures are properly handled.
The AM62L DSS [1] support incorrectly used the same register and
clock constraints as AM65x, but AM62L has a single video port
Fix this by adding conditional constraints that properly define the
register regions and clocks for AM62L DSS (single video port) versus
other AM65x variants (dual video port).
[1]: Section 12.7 (Display Subsystem and Peripherals)
Link : https://www.ti.com/lit/pdf/sprujb4
Fixes: cb8d4323302c ("dt-bindings: display: ti,am65x-dss: Add support for AM62L DSS") Cc: stable@vger.kernel.org Signed-off-by: Swamil Jain <s-jain1@ti.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260415110409.2577633-1-s-jain1@ti.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Marek Vasut [Sat, 4 Apr 2026 03:42:50 +0000 (05:42 +0200)]
dt-bindings: display: simple: Move Innolux G156HCE-L01 panel to dual-link
The Innolux G156HCE-L01 15.6" 1920x1080 24bpp dual-link LVDS TFT panel
is exactly that, dual-link LVDS panel. Move it into the correct schema,
which is panel-simple-lvds-dual-ports.yaml.
Marek Vasut [Sat, 4 Apr 2026 03:42:49 +0000 (05:42 +0200)]
dt-bindings: display: simple: Move AUO 21.5" FHD to dual-link
AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
is a dual-link LVDS panel. Move it into the correct schema, which is
panel-simple-lvds-dual-ports.yaml.
dt-bindings: thermal: Fix false warning with 'phandle' in trips nodes
A pattern property matching essentially anything doesn't work if there
are implicit properties such as 'phandle' which can occur on any node.
One such example popped up recently:
arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: thermal-zones: gpuss0-thermal:trips:phandle: 531 is not of type 'object'
from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml
Instead of a pattern property, use an "additionalProperties" schema
instead which is the fallback in case of no matching property.
of: unittest: fix use-after-free in testdrv_probe()
The function testdrv_probe() retrieves the device_node from the PCI
device, applies an overlay, and then immediately calls of_node_put(dn).
This releases the reference held by the PCI core, potentially freeing
the node if the reference count drops to zero. Later, the same freed
pointer 'dn' is passed to of_platform_default_populate(), leading to a
use-after-free.
The reference to pdev->dev.of_node is owned by the device model and
should not be released by the driver. Remove the erroneous of_node_put()
to prevent premature freeing.
of: unittest: fix use-after-free in of_unittest_changeset()
The variable 'parent' is assigned the value of 'nchangeset' earlier in the
function, meaning both point to the same struct device_node. The call to
of_node_put(nchangeset) can decrement the reference count to zero and
free the node if there are no other holders. After that, the code still
uses 'parent' to check for the presence of a property and to read a
string property, leading to a use-after-free.
Fix this by moving the of_node_put() call after the last access to
'parent', avoiding the UAF.
selftests: fib_nexthops: test stale has_v4 on nexthop replace
Add test cases that exercise the scenario where an IPv6 nexthop is
replaced with an IPv4 nexthop while being part of a group. The group's
has_v4 flag must be updated so that subsequent IPv6 route additions are
properly rejected.
Two cases are covered:
1. Gateway nexthop replaced across families with an existing IPv6
route on the group (rejected by fib6_check_nh_list).
2. Blackhole nexthop replaced across families with no existing IPv6
route on the group (fib6_check_nh_list returns early) — this is
the path that triggers a NULL ptr deref without the kernel fix.
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group.
CC: stable@vger.kernel.org Fixes: abc77577a669 ("fsnotify: Provide framework for dropping SRCU lock in ->handle_event") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://patch.msgid.link/20260410144950.156160-1-mszeredi@redhat.com Signed-off-by: Jan Kara <jack@suse.cz>
Dudu Lu [Mon, 13 Apr 2026 11:00:41 +0000 (19:00 +0800)]
net/sched: sch_cake: fix NAT destination port not being updated in cake_update_flowkeys
cake_update_flowkeys() is supposed to update the flow dissector keys
with the NAT-translated addresses and ports from conntrack, so that
CAKE's per-flow fairness correctly identifies post-NAT flows as
belonging to the same connection.
For the source port, this works correctly:
keys->ports.src = port;
But for the destination port, the assignment is reversed:
port = keys->ports.dst;
This means the NAT destination port is never updated in the flow keys.
As a result, when multiple connections are NATed to the same destination,
CAKE treats them as separate flows because the original (pre-NAT)
destination ports differ. This breaks CAKE's NAT-aware flow isolation
when using the "nat" mode.
The bug was introduced in commit b0c19ed6088a ("sch_cake: Take advantage
of skb->hash where appropriate") which refactored the original direct
assignment into a compare-and-conditionally-update pattern, but wrote
the destination port update backwards.
Fix by reversing the assignment direction to match the source port
pattern.
Fixes: b0c19ed6088a ("sch_cake: Take advantage of skb->hash where appropriate") Signed-off-by: Dudu Lu <phx0fer@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20260413110041.44704-1-phx0fer@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: bridge: use a stable FDB dst snapshot in RCU readers
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns.
Fixes: 960b589f86c7 ("bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/6570fabb85ecadb8baaf019efe856f407711c7b9.1776043229.git.zcliangcn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dudu Lu [Mon, 13 Apr 2026 08:53:49 +0000 (16:53 +0800)]
macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF
macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but
macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1.
This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb
runs out of space, triggering a WARN_ON in rtnetlink and preventing the
interface from being dumped.
The bug can be reproduced with:
ip link add macvlan0 link eth0 type macvlan mode bridge
ip link set macvlan0 type macvlan bc_cutoff 0
ip -d link show macvlan0 # fails with -EMSGSIZE
The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add
netlink attribute for broadcast cutoff"), which added the nla_put_s32()
call in macvlan_fill_info() but missed adding the corresponding
nla_total_size(4) in macvlan_get_size(). A follow-up commit 55cef78c244d ("macvlan: add forgotten nla_policy for
IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still
did not fix the size calculation.
Fixes: 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") Signed-off-by: Dudu Lu <phx0fer@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260413085349.73977-1-phx0fer@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paul Moses [Wed, 1 Apr 2026 08:07:49 +0000 (03:07 -0500)]
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
Fixes: 2b789435d7f3 ("crypto: ccp - CCP AES crypto API support") Signed-off-by: Paul Moses <p@1g4.org> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed
When retrieving the ID for the CPU, don't attempt to copy the ID blob to
userspace if the firmware command failed. If the failure was due to an
invalid length, i.e. the userspace buffer+length was too small, copying
the number of bytes _firmware_ requires will overflow the kernel-allocated
buffer and leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com> Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com> Fixes: d6112ea0cb34 ("crypto: ccp - introduce SEV_GET_ID2 command") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com> Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com> Fixes: 76a2b524a4b1 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com> Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com> Fixes: e799035609e1 ("crypto: ccp: Implement SEV_PEK_CSR ioctl command") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Thu, 16 Apr 2026 09:00:50 +0000 (17:00 +0800)]
crypto: pcrypt - Fix handling of MAY_BACKLOG requests
MAY_BACKLOG requests can return EBUSY. Handle them by checking
for that value and filtering out EINPROGRESS notifications.
Reported-by: Yiming Qian <yimingqian591@gmail.com> Fixes: 5a1436beec57 ("crypto: pcrypt - call the complete function on error") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
T Pratham [Wed, 15 Apr 2026 14:36:58 +0000 (20:06 +0530)]
crypto: sa2ul - Fix AEAD fallback algorithm names
For authenc AEAD algorithms, sa2ul is trying to register very specific
-ce version as a fallback. This causes registration failure on SoCs
which do not have ARMv8-CE enabled/available. Change the fallback
algorithm from the specific driver name to generic algorithm name so
that the kernel can allocate any available fallback.
Herbert Xu [Tue, 14 Apr 2026 23:39:06 +0000 (07:39 +0800)]
crypto: authencesn - Fix src offset when decrypting in-place
The src SG list offset wasn't set properly when decrypting in-place,
fix it.
Reported-by: Wolfgang Walter <linux@stwm.de> Fixes: e02494114ebf ("crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
eip93_hmac_setkey() allocates a temporary ahash transform for
computing HMAC ipad/opad key material. The allocation uses the
driver-specific cra_driver_name (e.g. "sha256-eip93") but passes
CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms.
Since the EIP93 hash algorithms are the only ones registered
under those driver names and they are inherently async, the
lookup is self-contradictory and always fails with -ENOENT.
When called from the AEAD setkey path, this failure leaves the
SA record partially initialized with zeroed digest fields. A
subsequent crypto operation then dereferences a NULL pointer in
the request context, resulting in a kernel panic:
The reported symbol eip93_aead_handle_result+0xc8c is a
resolution artifact from static functions being merged under
the nearest exported symbol. Decoding the faulting sequence:
The faulting LDR at [X26, #0x8] is loading ctx->flags
(offset 8 in eip93_hash_ctx), where ctx has been resolved
to NULL from a partially initialized or unreachable
transform context following the failed setkey.
Fix this by dropping the CRYPTO_ALG_ASYNC mask from the
crypto_alloc_ahash() call. The code already handles async
completion correctly via crypto_wait_req(), so there is no
requirement to restrict the lookup to synchronous algorithms.
Note that hashing a single 64-byte block through the hardware
is likely slower than doing it in software due to the DMA
round-trip overhead, but offloading it may still spare CPU
cycles on the slower embedded cores where this IP is found.
Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
[Detailed investigation report of this bug] Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dudu Lu [Mon, 13 Apr 2026 08:49:27 +0000 (16:49 +0800)]
net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir
In tcf_blockcast_redir(), when iterating block ports to redirect
packets to multiple devices, the mac_header_xmit flag is queried
from the wrong device. The loop sends to dev_prev but queries
dev_is_mac_header_xmit(dev) — which is the NEXT device in the
iteration, not the one being sent to.
This causes tcf_mirred_to_dev() to make incorrect decisions about
whether to push or pull the MAC header. When the block contains
mixed device types (e.g., an ethernet veth and a tunnel device),
intermediate devices get the wrong mac_header_xmit flag, leading to
skb header corruption. In the worst case, skb_push_rcsum with an
incorrect mac_len can exhaust headroom and panic.
The last device in the loop is handled correctly (line 365-366 uses
dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste
oversight for the intermediate devices.
Fix by using dev_prev instead of dev for the mac_header_xmit query,
consistent with the device actually being sent to.
Fixes: 42f39036cda8 ("net/sched: act_mirred: Allow mirred to block") Signed-off-by: Dudu Lu <phx0fer@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260413084927.71353-1-phx0fer@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cássio Gabriel [Wed, 15 Apr 2026 15:04:53 +0000 (12:04 -0300)]
ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES
parse_uac2_sample_rate_range() caps the number of enumerated
rates at MAX_NR_RATES, but it only breaks out of the current
rate loop. A malformed UAC2 RANGE response with additional
triplets continues parsing the remaining triplets and repeatedly
prints "invalid uac2 rates" while probe still holds
register_mutex.
Stop the whole parse once the cap is reached and return the
number of rates collected so far.
Fixes: 4fa0e81b8350 ("ALSA: usb-audio: fix possible hang and overflow in parse_uac2_sample_rate_range()") Cc: stable@vger.kernel.org Reported-by: syzbot+d56178c27a4710960820@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d56178c27a4710960820 Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com> Link: https://patch.msgid.link/20260415-usb-audio-uac2-rate-cap-v1-1-5ecbafc120d8@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: hda/intel: Move firmware loading into the probe work
The hda-intel driver uses request_firmware_nowait() for loading its
patch, and tries to continue the probe directly from the fw loader
callback. This works in principle, but it has a few drawbacks:
- The driver may be released before the firmware callback completes
- Having two ways of async probe makes the code flow unnecessarily
complex
The former issue is more severe, as it may potentially lead to a UAF,
and there is no explicit way to cancel the pending firmware worker
for now.
This patch changes the firmware loading to be performed rather in the
common probe work without *_nowait(). Then the pending work can be
easily canceled, and the code becomes more straightforward.
A nice bonus is that, by moving into the probe work, the firmware
doesn't need any longer to be cached, hence we can get rid of struct
azx.fw field, and release the firmware immediately after parsing it,
too.
fs/ntfs3: validate rec->used in journal-replay file record check
check_file_record() validates rec->total against the record size but
never validates rec->used. The do_action() journal-replay handlers read
rec->used from disk and use it to compute memmove lengths:
DeleteAttribute: memmove(attr, ..., used - asize - roff)
CreateAttribute: memmove(..., attr, used - roff)
change_attr_size: memmove(..., used - PtrOffset(rec, next))
When rec->used is smaller than the offset of a validated attribute, or
larger than the record size, these subtractions can underflow allowing
us to copy huge amounts of memory in to a 4kb buffer, generally
considered a bad idea overall.
This requires a corrupted filesystem, which isn't a threat model the
kernel really needs to worry about, but checking for such an obvious
out-of-bounds value is good to keep things robust, especially on journal
replay
Fix this up by bounding rec->used correctly.
This is much like commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds
read in DeleteIndexEntryRoot") which checked different values in this
same switch statement.
. The stm32 PWM cannot configure offset_ticks freely, it can only select
0 or period_length_ns - duty_length_ns---that is the classic normal and
inverted polarity. The decision to select the hardware polarity must be
done using the ticks values and not the nanoseconds times to adhere to
the rounding rules by the pwm core.
With the pwm clk running at 208900 kHz on my test machine
(stm32mp135f-dk), a test case that was handled wrong is:
smb: smbdirect: let smbdirect_connection_deregister_mr_io unlock while waiting
We should not hold a mutex locked during wait_for_completion()
holding a reference is enough.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Henrique Carvalho <henrique.carvalho@suse.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: smbdirect: fix the logic in smbdirect_socket_destroy_sync() without an error
If smbdirect_socket_destroy_sync() and sc->first_error was not set
we should set -ESHUTDOWN, that's a better condition
doing it only implicitly with the
sc->status < SMBDIRECT_SOCKET_DISCONNECTING check.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Henrique Carvalho <henrique.carvalho@suse.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: smbdirect: fix copyright header of smbdirect.h
Everything in smbdirect.h was taken from my out of
tree prototype.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Henrique Carvalho <henrique.carvalho@suse.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: smbdirect: change smbdirect_socket_parameters.{initiator_depth,responder_resources} to __u16
We still limit this to U8_MAX as the rdma api only uses __u8
and that's also the limit for Infiniband and RoCE*,
while iWarp would be able to support larger values at
the protocol level.
As struct smbdirect_socket_parameters will be part
of the uapi for IPPROTO_SMBDIRECT in future, change it
now even if userspace sockets won't be supported yet.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Acked-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
We always build as standalone module (or as part of the core kernel).
This also removes unused elements from struct smbdirect_socket
and unused exports.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: no longer use smbdirect_socket_set_custom_workqueue()
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: no longer use smbdirect_socket_set_custom_workqueue()
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
These will be used in future and callers should no
longer use smbdirect_socket_set_custom_workqueue().
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: smbdirect: prepare use of dedicated workqueues for different steps
This is a preparation in order to have global workqueues in
the smbdirect module instead of having the caller to
provide one.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
This would actually never be used as we only move to
SMBDIRECT_MR_ERROR when we directly call
smbdirect_socket_schedule_cleanup().
Doing an ib_dereg_mr/ib_alloc_mr dance on
working connection is not needed and
it's also pointless on a broken connection
as we don't reuse any ib_pd.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: smbdirect: wrap rdma_disconnect() in rdma_[un]lock_handler()
This might not be needed, but it controls the order
of ib_drain_qp() and rdma_disconnect().
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_netdev_rdma_capable_mode_type()
This removes is basically the same logic.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically a copy of ksmbd_rdma_capable_netdev() in the
server, but this also prints a message when a device is renamed.
The differences are:
- It uses rdma_for_each_port() instead of implementing the
same logic again.
- It returns RDMA_NODE_{UNSPECIFIED,IB_CA,RNIC} values instead of bool
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
This means we no longer inline the common smbdirect
.c files and use the exported functions from the
module instead.
Note the connection specific logging is still
redirect to ksmbd.ko functions via
smbdirect_socket_set_logging().
We still don't use real socket layer,
but we're very close...
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_{listen,accept}()
We no longer need the custom rdma listener.
The code logic is very similar to transport_tcp.c now
using a kernel thread that loops over smbdirect_socket_accept().
This is the first step in the direction of using IPPROTO_SMBDIRECT
sockets in future.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_create_accepting()/smbdirect_socket_release()
With this we no longer embed struct smbdirect_socket, which will allow
us to make it private in the following commits.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_{socket_init_accepting,connection_wait_for_connected}()
This means we finally only use common functions in the server.
We still use the embedded struct smbdirect_socket and are
able to access internals, but the will be removed in the
next commits as well.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_send_iter() and related functions
This makes use of common code for sending messages, this will
allow to make more use of common code in the next commits.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: let smb_direct_post_send_data() return data_length
This make it easier moving to common code shared with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: split out smb_direct_send_iter() out of smb_direct_writev()
This will help to move to common code in future.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: let smbdirect_map_sges_from_iter() truncate the message boundary
smbdirect_map_sges_from_iter() already handles the case that only
a limited number of sges are available. Its return value
is data_length and the remaining bytes in the iter are
remaining_data_length.
This is now much easier and will allow us to share
more code with the client soon.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: inline smb_direct_create_header() into smb_direct_post_send_data()
The point is that ib_dma_map_single() is done first, but
the 'Fill in the packet header' will be done after
smbdirect_map_sges_from_iter().
This will simplify further changes in order to
share common code with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: move iov_iter_kvec() out of smb_direct_post_send_data()
This will allow us to make the code more generic in order
to move it to common with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_request_keep_alive()
This will help to share more common code soon.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_grant_recv_credits()
This is already used by the client too and will
help to share more common code.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_recvmsg()
This is basically the same logic, it just operates on iov_iter_kvec()
instead of a raw buffer pointer. This allows us to use common
code between client and server.
We keep returning -EINTR instead of -ERESTARTSYS if
wait_event_interruptible() fails. I don't if this is
required, but changing it is a task for another patch.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_destroy_sync()
This is basically the same logic as before, but we now
use common code, which will also be used by the server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of functions from smbdirect_rw.c
The copied code only got new names, some indentation/formatting changes,
some variable names are changed too.
They also only use struct smbdirect_socket instead of
struct smb_direct_transport.
But the logic is still the same.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_wait_for_credits()
This will allow us to share more common code between client and
server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_get_buf_page_count()
This will allow us to move code into common code
between client and server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_recv_io_refill[_work]()
This is basically a copy of smb_direct_post_recv_credits(), but
there are several improvements compared to the existing function:
1. We calculate the number of missing posted buffers by getting the
difference between recv_io.credits.target and recv_io.posted.count.
Instead of the difference between recv_io.credits.target
and recv_io.credits.count, because recv_io.credits.count is
only updated once a message is send to the peer.
It was not really a problem before, because we have
a fixed number smbdirect_recv_io buffers, so the
loop terminated when smbdirect_connection_get_recv_io()
returns NULL.
But using recv_io.posted.count makes it easier to
understand.
2. In order to tell the peer about the newly posted buffer
and grant the credits, we only trigger the send immediate
when we're not granting only the last possible credit.
This is mostly a difference relative to the servers
smb_direct_post_recv_credits() implementation,
which should avoid useless ping pong messages.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_post_recv_io()
The only difference is that smbdirect_connection_post_recv_io()
returns early if the connection is already broken.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_{create,destroy}_qp()
It's good a use common code for this and it will allow us
to share more code in the next steps.
Calling ib_drain_qp() twice is ok.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_negotiate_rdma_resources()
It's good to have this logic in a central place, it will allow us
share more code soon.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_qp_event_handler()
This is a copy of smb_direct_qpair_handler()...
It will allow more code to be moved to common functions
soon.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_map_sges_from_iter()
It will make it easier to move stuff into common code when
both client and server use smbdirect_map_sges_from_iter().
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_{create,destroy}_mem_pools()
This were based on smb_direct_{create,destroy}_pools() in the server.
The main logical differences are the following:
We now don't use smbdirect_connection_get_recv_io() on cleanup,
instead it uses list_for_each_entry_safe()...
We don't generate warnings if smbdirect_recv_io payload
is copied into userspace buffers. This doesn't happen
in the server anyway.
And it uses list_add_tail() just to let me feel
better when looking at the code...
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_send_io_done()
This also wakes up send_io.pending.dec_wait_queue, which
is currently always empty in the server, but that might
change in future. And we also don't spam the logs on IB_WC_WR_FLUSH_ERR.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_{alloc,free}_send_io()
These are basically copies of smb_direct_{alloc,free}_sendmsg() just
a bit simpler and with the gfp_mask mask abstracted.
For now we still use KSMBD_DEFAULT_GFP, which includes
__GFP_RETRY_MAYFAIL.
The only difference is that we use ib_dma_unmap_page() for all sges,
this simplifies the logic and doesn't matter as
ib_dma_unmap_single() and ib_dma_unmap_page() both operate
on dma_addr_t and dma_unmap_single_attrs() is just an
alias for dma_unmap_page_attrs().
We already had such an inconsistency in the client
code where we use ib_dma_unmap_single(), while we mapped
using ib_dma_map_page().
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_frwr_is_supported()
This is an exact copy of rdma_frwr_is_supported().
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_reassembly_{append,first}_recv_io()
These are basically copies of enqueue_reassembly() and
get_first_reassembly(). The only difference is that
sc->statistics.enqueue_reassembly_queue now updated.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_connection_{get,put}_recv_io()
These are basically copies of {get,put}_receive_buffer() in the client.
They are very similar to {get_free,put}_recvmsg() the only logical
difference is the updating of the sc->statistics.*.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_schedule_cleanup()
This removes smb_direct_disconnect_rdma_connection() which is basically
the same as smbdirect_socket_schedule_cleanup().
And we pass more useful errors than -ECONNABORTED if we have them.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_cleanup_work()
Note smbdirect_socket_prepare_create() already calls INIT_WORK()
with smbdirect_socket_cleanup_work.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_wake_up_all()
This is a superset of smb_direct_disconnect_wake_up_all() and
calling wake_up_all(&sc->mr_io.ready.wait_queue); and
wake_up_all(&sc->mr_io.cleanup.wait_queue); in addition
should not matter as it's not used on the server anyway.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_set_logging()
This will allow the logging to keep working as before,
when we move to common functions in the next commits.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make use of smbdirect_socket_prepare_create()
This prepares the use of functions from smbdirect_connection.c.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
This means we no longer inline the common smbdirect
.c files and use the exported functions from the
module instead.
Note the connection specific logging is still
redirect to cifs.ko functions via
smbdirect_socket_set_logging().
We still don't use real socket layer,
but we're very close...
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_socket_create_kern()/smbdirect_socket_release()
With this we no longer embed struct smbdirect_socket, which will allow
us to make it private in the following commits.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_socket_init_new() and smbdirect_connect_sync()
This means we finally only use common functions in the client.
We still use the embedded struct smbdirect_socket and are
able to access internals, but the will be removed in the
next commits as well.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: introduce and use smbd_debug_proc_show()
This will allow us to make struct smbdirect_socket private
in future.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: introduce and use smbd_mr_fill_buffer_descriptor()
This will allow us to make struct smbdirect_mr_io private in future.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_connection_send_{single_iter,immediate_work}()
With this the low level send functions are in common,
we'll have to do some more changes in generic smb code
in order to use smbdirect_connection_send_iter() instead
of looping around smbdirect_connection_send_single_iter().
David's cleanups will allow us to use
smbdirect_connection_send_iter().
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: let smbd_post_send_full_iter() get remaining_length and return data_length
This will simplify further changes in order to share
more common code in future.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: let smbd_post_send_iter() get remaining_length and return data_length
This lets the logic be like smb_direct_post_send_data(), so
we can share common code in the next steps.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: change smbd_post_send_empty() to void return
The caller doesn't check, so we better call
smbdirect_socket_schedule_cleanup() to handle the error.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_connection_request_keep_alive()
This will help to share more common code soon.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_connection_grant_recv_credits()
This already calls atomic_add(new_credits, &sc->recv_io.credits.count),
so there's no need to do it in the caller anymore.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_connection_recvmsg()
This is basically the same as it was copied before...
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_socket_destroy_sync()
This is basically the same logic as before, but we now
use common code, which will also be used by the server soon.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of functions from smbdirect_mr.c
The copied code only got new names, some indentation/formatting changes,
some variable names are changed too.
They also only use struct smbdirect_socket instead of
struct smbd_connection.
But the logic is still the same.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_connection_recv_io_refill_work()
This is basically a copy of smbd_post_send_credits(), but
there are several improvements compared to the existing function:
We calculate the number of missing posted buffers by getting the
difference between recv_io.credits.target and recv_io.posted.count.
Instead of the difference between recv_io.credits.target
and recv_io.credits.count, because recv_io.credits.count is
only updated once a message is send to the peer.
It was not really a problem before, because we have
a fixed number smbdirect_recv_io buffers, so the
loop terminated when smbdirect_connection_get_recv_io()
returns NULL.
But using recv_io.posted.count makes it easier to
understand.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_connection_post_recv_io()
The only difference is that smbdirect_connection_post_recv_io()
returns early if the connection is already broken.
And that the error code from ib_dma_mapping_error() (currently only -ENOMEM
is possible) is returned instead of -EIO.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: initialize recv_io->cqe.done = recv_done just once
smbdirect_recv_io structures are pre-allocated so we can set the
callback function just once.
This will make it easy to move smbd_post_recv() to common code
soon.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_connection_{create,destroy}_qp()
It's good a use common code for this and it will allow us
to share more code in the next steps.
Calling ib_drain_qp() twice is ok.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: make use of smbdirect_connection_negotiate_rdma_resources()
It's good to have this logic in a central place, it will allow us
share more code soon.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
projects / thirdparty / kernel / linux.git / log
