Merge tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- Many new features and optimizations to printf()
- Rename non-standard symbols to avoid collisions with application code
- Support for byteswap.h, endian.h, err.h and asprintf()
- 64-bit dev_t
- Smaller cleanups and fixes to the code and build system
* tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (61 commits)
selftests/nolibc: use gcc 15
tools/nolibc: support UBSAN on gcc
tools/nolibc: create __nolibc_no_sanitize_ubsan
selftests/nolibc: don't skip tests for unimplemented syscalls anymore
selftests/nolibc: explicitly handle ENOSYS from ptrace()
tools/nolibc: add byteorder conversions
tools/nolibc: add the _syscall() macro
tools/nolibc: move the call to __sysret() into syscall()
tools/nolibc: rename the internal macros used in syscall()
selftests/nolibc: only use libgcc when really necessary
selftests/nolibc: test the memory allocator
tools/nolibc: check for overflow in calloc() without divisions
tools/nolibc: add support for asprintf()
tools/nolibc: use __builtin_offsetof()
tools/nolibc: use makedev() in fstatat()
tools/nolibc: handle all major and minor numbers in makedev() and friends
tools/nolibc: make dev_t 64 bits wide
tools/nolibc: move the logic of makedev() and friends into functions
selftests/nolibc: add a test for stat().st_rdev
selftests/nolibc: add some tests for makedev() and friends
...
Merge tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for huge pfnmaps
- Cleanups to use masked user access
- Rework pnv_ioda_pick_m64_pe() to use better bitmap API
- Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
- Backup region offset update to eflcorehdr
- Fixes for wii/ps3 platform
- Implement JIT support for private stack in powerpc
- Implement JIT support for fsession in powerpc64 trampoline
- Add support for instruction array and indirect jump in powerpc
- Misc selftest fixes and cleanups
Thanks to Abhishek Dubey, Aditya Gupta, Alex Williamson, Amit Machhiwal,
Andrew Donnellan, Bartosz Golaszewski, Cédric Le Goater, Chen Ni,
Christophe Leroy (CS GROUP), Hari Bathini, J. Neuschäfer, Mukesh Kumar
Chaurasiya (IBM), Nam Cao, Nilay Shroff, Pavithra Prakash, Randy Dunlap,
Ritesh Harjani (IBM), Shrikanth Hegde, Sourabh Jain, Vaibhav Jain,
Venkat Rao Bagalkote, and Yury Norov (NVIDIA)
* tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (47 commits)
mailmap: Add entry for Andrew Donnellan
powerpc32/bpf: fix loading fsession func metadata using PPC_LI32
selftest/bpf: Enable gotox tests for powerpc64
powerpc64/bpf: Add support for indirect jump
selftest/bpf: Enable instruction array test for powerpc
powerpc/bpf: Add support for instruction array
powerpc32/bpf: Add fsession support
powerpc64/bpf: Implement fsession support
selftests/bpf: Enable private stack tests for powerpc64
powerpc64/bpf: Implement JIT support for private stack
powerpc: pci-ioda: Optimize pnv_ioda_pick_m64_pe()
powerpc: pci-ioda: use bitmap_alloc() in pnv_ioda_pick_m64_pe()
powerpc/net: Inline checksum wrappers and convert to scoped user access
powerpc/sstep: Convert to scoped user access
powerpc/align: Convert emulate_spe() to scoped user access
powerpc/ptrace: Convert gpr32_set_common_user() to scoped user access
powerpc/futex: Use masked user access
powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
cpuidle: powerpc: avoid double clear when breaking snooze
powerpc/ps3: spu.c: fix enum and Return kernel-doc warnings
...
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest changes are MPAM enablement in drivers/resctrl and new PMU
support under drivers/perf.
On the core side, FEAT_LSUI lets futex atomic operations with EL0
permissions, avoiding PAN toggling.
The rest is mostly TLB invalidation refactoring, further generic entry
work, sysreg updates and a few fixes.
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for
better control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using
resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can
use resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (109 commits)
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
ACPI: AGDI: fix missing newline in error message
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
...
i2c: mediatek: add bus regulator control for power saving
Add conditional bus regulator enable/disable in mtk_i2c_transfer()
to support I2C bus power gating for platforms that require it.
This implementation:
- Enables bus_regulator before clk_bulk_enable() if vbus-supply is defined
- Disables bus_regulator after clk_bulk_disable()
- Only activates when vbus-supply is provided in device tree
- Has no impact on platforms without vbus-supply defined
This approach provides power savings for platforms with an extra I2C bus
regulator, while avoiding runtime PM complexity.
Merge tag 'ras_core_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add new AMD MCA bank names and types to the MCA code, preceded by a
clean up of the relevant places to have them more developer-friendly
(read: sort them alphanumerically and clean up comments) such that
adding new banks is easy
* tag 'ras_core_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce, EDAC/mce_amd: Add new SMCA bank types
x86/mce, EDAC/mce_amd: Update CS bank type naming
x86/mce, EDAC/mce_amd: Reorder SMCA bank type enums
Merge tag 'edac_updates_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Add support for AMD Zen 3 (family 19h, models 40h–4fh)
- i10nm: Add GNR error information decoder support as an alternative to
the firmware decoder
- versalnet: Restructure the init/teardown logic for correct and more
readable error handling. Also, fix two memory leaks and a resource
leak
- Convert several internal structs to use bounded flex arrays, enabling
the kernel's runtime checker to catch out-of-bounds memory accesses
- Mark various sysfs attribute tables read-only, preventing accidental
modification at runtime
- The usual fixes and cleanups across the subsystem
* tag 'edac_updates_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/mc: Use kzalloc_flex()
EDAC/ie31200: Make rpl_s_cfg static
EDAC/i10nm: Fix spelling mistake "readd" -> "read"
EDAC/versalnet: Fix device_node leak in mc_probe()
EDAC/versalnet: Fix memory leak in remove and probe error paths
EDAC/amd64: Add support for family 19h, models 40h-4fh
EDAC/i10nm: Add driver decoder for Granite Rapids server
EDAC/sb: Use kzalloc_flex()
EDAC/i7core: Use kzalloc_flex()
EDAC/mpc85xx: Constify device sysfs attributes
EDAC/device: Allow addition of const sysfs attributes
EDAC/pci_sysfs: Constify instance sysfs attributes
EDAC/device: Constify info sysfs attributes
EDAC/device: Drop unnecessary and dangerous casts of attributes
EDAC/device: Drop unused macro to_edacdev_attr()
EDAC/altera: Drop unused field eccmgr_sysfs_attr
EDAC/versalnet: Refactor memory controller initialization and cleanup
Merge tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Change the SEV host code handling of when SNP gets enabled in order
to allow the machine to claim SNP-related resources only when SNP
guests are really going to be launched. The user requests this by
loading the ccp module and thus it controls when SNP initialization
is done
So export an API which module code can call and do the necessary SNP
setup only when really needed
- Drop an unnecessary write-back and invalidate operation that was
being performed too early, since the ccp driver already issues its
own at the correct point in the initialization sequence
- Drop the hotplug callbacks for enabling SNP on newly onlined CPUs,
which were both architecturally unsound (the firmware rejects
initialization if any CPU lacks the required configuration) and buggy
(the MFDM SYSCFG MSR bit was not being set)
- Code refactoring and cleanups to accomplish the above
* tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
crypto/ccp: Update HV_FIXED page states to allow freeing of memory
crypto/ccp: Implement SNP x86 shutdown
x86/sev, crypto/ccp: Move HSAVE_PA setup to arch/x86/
x86/sev, crypto/ccp: Move SNP init to ccp driver
x86/sev: Create snp_shutdown()
x86/sev: Create snp_prepare()
x86/sev: Create a function to clear/zero the RMP
x86/sev: Rename SNP_FEATURES_PRESENT to SNP_FEATURES_IMPL
x86/virt/sev: Keep the RMP table bookkeeping area mapped
x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN
x86/virt/sev: Drop support for SNP hotplug
Merge tag 'x86_misc_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Reference the tip tree maintainer handbook directly from the relevant
MAINTAINERS file entries (covering timers, IRQ, locking, scheduling,
perf, x86, and others) so that contributors and tooling can know
where to look
- Enable interrupt remapping in defconfig, which is an architectural
requirement for x2APIC to function correctly on bare metal. Without
it, x2APIC was effectively enabled but non-functional.
- Ensure that drivers which register custom restart handlers (such as
those needed for SoC-based x86 devices like Intel Lightning Mountain)
are actually invoked during reboot, bringing x86 in line with how
other architectures handle this.
- Cleanups
* tag 'x86_misc_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add references to tip tree handbook
x86/64/defconfig: Add CONFIG_IRQ_REMAP
x86/reboot: Execute the kernel restart handler upon machine restart
x86/mtrr: Use kstrtoul() in parse_mtrr_spare_reg()
Gabor Juhos [Thu, 26 Feb 2026 13:11:28 +0000 (14:11 +0100)]
i2c: pxa: handle 'Early Bus Busy' condition on Armada 3700
Under some circumstances I2C recovery fails on Armada 3700. At least
on the Methode uDPU board, removing and replugging an SFP module fails
often, like this:
[ 36.953127] sfp sfp-eth1: module removed
[ 38.468549] i2c i2c-1: i2c_pxa: timeout waiting for bus free
[ 38.486960] sfp sfp-eth1: module MENTECHOPTO POS22-LDCC-KR rev 1.0 sn MNC208U90009 dc 200828
[ 38.496867] mvneta d0040000.ethernet eth1: unsupported SFP module: no common interface modes
[ 38.521448] hwmon hwmon2: temp1_input not attached to any thermal zone
[ 39.249196] sfp sfp-eth1: module removed
...
[ 292.568799] sfp sfp-eth1: please wait, module slow to respond
...
[ 625.208814] sfp sfp-eth1: failed to read EEPROM: -EREMOTEIO
Note that the 'unsupported SFP module' messages are not relevant. The
module is used only for testing the I2C recovery funcionality, because
the error can be triggered easily with this specific one.
Enabling debug in the i2c-pxa driver reveals the following:
[ 115.368641] i2c i2c-1: slave_0x50 error: timeout with active message
... while finally the SFP core gives up:
[ 671.975258] sfp sfp-eth1: failed to read EEPROM: -EREMOTEIO
When we analyze the log, it can be seen that bit 1 and 11 is set in the
ISR (Interface Status Register). Bit 1 indicates the ACK/NACK status, but
the purpose of bit 11 is not documented in the driver code unfortunately.
The 'Functional Specification' document of the Armada 3700 SoCs family
however says that this bit indicates an 'Early Bus Busy' condition. The
document also notes that whenever this bit is set, it is not possible to
initiate a transaction on the I2C bus. The observed behaviour corresponds
to this statement.
Unfortunately, I2C recovery does not help as it never runs in this
special case. Although the driver checks the busyness of the bus at
several places, but since it does not consider the A3700 specific bit
in these checks it can't determine the actual status of the bus correctly
which results in the errors above.
In order to fix the problem, add a new member to struct 'i2c_pxa' to
store a controller specific bitmask containing the bits indicating the
busy status, and use that in the code while checking the actual status
of the bus. This ensures that the correct status can be determined on
the Armada 3700 based devices without causing functional changes on
devices based on other SoCs.
With the change applied, the driver detects the busy condition, and runs
the recovery process:
This clears the EBB bit in the ISR register, so it makes it possible to
initiate transactions on the I2C bus again.
After this patch, the SFP module used for testing can be removed and
replugged numerous times without causing the error described at the
beginning. Previously, the error happened after a few such attempts.
The patch has been tested also with the following kernel versions:
5.10.251, 5.15.201, 6.1.164, 6.6.127, 6.12.74, 6.14.11, 6.15.10, 6.16.1,
6.18.13, 6.19.3
It improves recovery on all of them.
Merge tag 'x86_microcode_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov:
"The kernel carries a table of Intel CPUs family, model, stepping, etc
tuples which say what is the latest microcode for that particular CPU.
Some CPU variants differ only by the platform ID which determines what
microcode needs to be loaded on them.
Carve out the platform ID handling from the microcode loader and make it
available in a more generic place so that the old microcode
verification machinery can use it"
* tag 'x86_microcode_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Add platform mask to Intel microcode "old" list
x86/cpu: Add platform ID to CPU matching structure
x86/cpu: Add platform ID to CPU info structure
x86/microcode: Refactor platform ID enumeration into a helper
Merge tag 'x86_fred_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED updates from Borislav Petkov:
"We made the FRED support an opt-in initially out of fear of it
breaking machines left and right in the case of a hw bug in the first
generation of machines supporting it.
Now that that the FRED code has seen a lot of hammering, flip the
logic to be opt-out as is the usual case with new hw features"
* tag 'x86_fred_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Remove kernel log message when initializing exceptions
x86/fred: Enable FRED by default
Merge tag 'x86_cache_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add return value descriptions to several internal functions,
addressing kernel-doc complaints
- Add the x86 maintainer mailing list to the resctrl section so they
are automatically included in patch submissions, and reference the
applicable contribution rules document
- Allow users to apply a single Capacity Bitmask to all cache domains
at once using '*' as a shorthand, instead of having to specify each
domain individually. This is particularly user-friendly on high
core-count systems with many cache clusters
- When a user provides a non-existent domain ID while configuring cache
allocation, ensure the failure reason is properly reported to the
user rather than silently returning an error with a misleading "ok"
status
* tag 'x86_cache_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Add missing return value descriptions
MAINTAINERS: Update resctrl entry
fs/resctrl: Add "*" shorthand to set io_alloc CBM for all domains
fs/resctrl: Report invalid domain ID when parsing io_alloc_cbm
Merge tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The only real thing of note here is printing the TDX module version.
This is a little silly on its own, but the upcoming TDX module update
code needs the same TDX module call. This shrinks that set a wee bit.
There's also few minor macro cleanups and a tweak to the GetQuote ABI
to make it easier for userspace to detect zero-length (failed) quotes"
* tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: tdx-guest: Return error for GetQuote failures
KVM/TDX: Rename KVM_SUPPORTED_TD_ATTRS to KVM_SUPPORTED_TDX_TD_ATTRS
x86/tdx: Rename TDX_ATTR_* to TDX_TD_ATTR_*
KVM/TDX: Remove redundant definitions of TDX_TD_ATTR_*
x86/tdx: Fix the typo in TDX_ATTR_MIGRTABLE
x86/virt/tdx: Print TDX module version during init
x86/virt/tdx: Retrieve TDX module version
Merge tag 'x86_mm_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
- Convert x86 code to use generic "pagetable" APIs and ptdescs
This aligns some the set_memory*() code better with the new page
table APIs, especially using ptdescs as opposed to 'struct page'
directly.
* tag 'x86_mm_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Convert split_large_page() to use ptdescs
x86/mm/pat: Convert populate_pgd() to use page table apis
x86/mm/pat: Convert pmd code to use page table apis
x86/mm/pat: Convert pte code to use page table apis
Merge tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Dave Hansen:
- Complete LASS enabling: deal with vsyscall and EFI
The existing Linear Address Space Separation (LASS) support punted
on support for common EFI and vsyscall configs. Complete the
implementation by supporting EFI and vsyscall=xonly.
- Clean up CPUID usage in newer Intel "avs" audio driver and update the
x86-cpuid-db file
* tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.0
ASoC: Intel: avs: Include CPUID header at file scope
ASoC: Intel: avs: Check maximum valid CPUID leaf
x86/cpu: Remove LASS restriction on vsyscall emulation
x86/vsyscall: Disable LASS if vsyscall mode is set to EMULATE
x86/vsyscall: Restore vsyscall=xonly mode under LASS
x86/traps: Consolidate user fixups in the #GP handler
x86/vsyscall: Reorganize the page fault emulation code
x86/cpu: Remove LASS restriction on EFI
x86/efi: Disable LASS while executing runtime services
x86/cpu: Defer LASS enabling until userspace comes up
Merge tag 'x86-vdso-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso updates from Ingo Molnar:
"vdso cleanups by Thomas Weißschuh:
- Clean up remnants of VDSO32_NOTE_MASK
- Drop pointless #ifdeffery in vvar_vclock_fault()"
* tag 'x86-vdso-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Drop pointless #ifdeffery in vvar_vclock_fault()
x86/vdso: Clean up remnants of VDSO32_NOTE_MASK
Merge tag 'x86-platform-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
- Remove M486/M486SX/ELAN support, first minimal step (Ingo Molnar)
- Print AGESA string from DMI additional information entry (Yazen
Ghannam, Mario Limonciello)
- Improve and fix the DMI code (Mario Limonciello):
- Correct an indexing error in <linux/dmi.h>
- Adjust dmi_decode() to use enums <linux/dmi.h>
- Add pr_fmt() for dmi_scan.c to fix & standardize the log prefixes
* tag 'x86-platform-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Print AGESA string from DMI additional information entry
firmware: dmi: Add pr_fmt() for dmi_scan.c
firmware: dmi: Adjust dmi_decode() to use enums
firmware: dmi: Correct an indexing error in dmi.h
x86/cpu: Remove M486/M486SX/ELAN support
* tag 'x86-cleanups-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Correct the comment explaining what xfeatures_in_use() does
x86/split_lock: Don't warn about unknown split_lock_detect parameter
x86/fpu: Correct misspelled xfeaures_to_write local var
x86/apic: Drop AMD Extended Interrupt LVT macros
x86/cpu/topology: Consolidate AMD and Hygon cases in parse_topology()
block/floppy: Don't use REALLY_SLOW_IO for delays
x86/paravirt: Replace io_delay() hook with a bool
x86/irqflags: Preemptively move include paravirt.h directive where it belongs
x86/split_lock: Restructure the unwieldy switch-case in sld_state_show()
x86/local: Remove trailing semicolon from _ASM_XADD in local_add_return()
x86/asm: Use inout "+" asm onstraint modifiers in __iowrite32_copy()
Merge tag 'x86-asm-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm from Ingo Molnar:
"x86 asm cleanups by Uros Bizjak:
- Remove unnecessary memory clobbers from FS/GS base (read-)
accessors and savesegment()
- Use ASM_INPUT_RM in __loadsegment_fs() to work around clang code
generation problems
- Implement loadsegment()/savesegment() macros with static inline
helpers
- Use savesegment() for segment register reads in ELF core dump and
__show_regs()
- Use correct type for 'gs' variable in __show_regs() to avoid
zero-extension
- Clean up 'sel' variable usage in do_set_thread_area()"
* tag 'x86-asm-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tls: Clean up 'sel' variable usage in do_set_thread_area()
x86/process/32: Use correct type for 'gs' variable in __show_regs() to avoid zero-extension
x86/process/64: Use savesegment() in __show_regs() instead of inline asm
x86/elf: Use savesegment() for segment register reads in ELF core dump
x86/asm/segment: Implement loadsegment()/savesegment() macros with static inline helpers
x86/asm/segment: Use ASM_INPUT_RM in __loadsegment_fs()
x86/asm/segment: Remove unnecessary "memory" clobber from savesegment()
x86/asm/fsgsbase: Remove unnecessary "memory" clobbers from FS/GS base (read-) accessors
Merge tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduling updates:
- Skip SCHED_IDLE rq for SCHED_IDLE tasks (Christian Loehle)
- Remove superfluous rcu_read_lock() in the wakeup path (K Prateek Nayak)
- Simplify the entry condition for update_idle_cpu_scan() (K Prateek Nayak)
- Simplify SIS_UTIL handling in select_idle_cpu() (K Prateek Nayak)
- Avoid overflow in enqueue_entity() (K Prateek Nayak)
- Update overutilized detection (Vincent Guittot)
- Prevent negative lag increase during delayed dequeue (Vincent Guittot)
- Clear buddies for preempt_short (Vincent Guittot)
- Implement more complex proportional newidle balance (Peter Zijlstra)
- Increase weight bits for avg_vruntime (Peter Zijlstra)
- Use full weight to __calc_delta() (Peter Zijlstra)
RT and DL scheduling updates:
- Fix incorrect schedstats for rt and dl thread (Dengjun Su)
- Skip group schedulable check with rt_group_sched=0 (Michal Koutný)
- Move group schedulability check to sched_rt_global_validate()
(Michal Koutný)
- Add reporting of runtime left & abs deadline to sched_getattr()
for DEADLINE tasks (Tommaso Cucinotta)
Scheduling topology updates by K Prateek Nayak:
- Compute sd_weight considering cpuset partitions
- Extract "imb_numa_nr" calculation into a separate helper
- Allocate per-CPU sched_domain_shared in s_data
- Switch to assigning "sd->shared" from s_data
- Remove sched_domain_shared allocation with sd_data
Energy-aware scheduling updates:
- Filter false overloaded_group case for EAS (Vincent Guittot)
- PM: EM: Switch to rcu_dereference_all() in wakeup path
(Dietmar Eggemann)
Infrastructure updates:
- Replace use of system_unbound_wq with system_dfl_wq (Marco Crivellari)
Proxy scheduling updates by John Stultz:
- Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
- Minimise repeated sched_proxy_exec() checking
- Fix potentially missing balancing with Proxy Exec
- Fix and improve task::blocked_on et al handling
- Add assert_balance_callbacks_empty() helper
- Add logic to zap balancing callbacks if we pick again
- Move attach_one_task() and attach_task() helpers to sched.h
- Handle blocked-waiter migration (and return migration)
- Add K Prateek Nayak to scheduler reviewers for proxy execution
Misc cleanups and fixes by John Stultz, Joseph Salisbury, Peter
Zijlstra, K Prateek Nayak, Michal Koutný, Randy Dunlap, Shrikanth
Hegde, Vincent Guittot, Zhan Xusheng, Xie Yuanbin and Vincent Guittot"
* tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
sched/eevdf: Clear buddies for preempt_short
sched/rt: Cleanup global RT bandwidth functions
sched/rt: Move group schedulability check to sched_rt_global_validate()
sched/rt: Skip group schedulable check with rt_group_sched=0
sched/fair: Avoid overflow in enqueue_entity()
sched: Use u64 for bandwidth ratio calculations
sched/fair: Prevent negative lag increase during delayed dequeue
sched/fair: Use sched_energy_enabled()
sched: Handle blocked-waiter migration (and return migration)
sched: Move attach_one_task and attach_task helpers to sched.h
sched: Add logic to zap balance callbacks if we pick again
sched: Add assert_balance_callbacks_empty helper
sched/locking: Add special p->blocked_on==PROXY_WAKING value for proxy return-migration
sched: Fix modifying donor->blocked on without proper locking
locking: Add task::blocked_lock to serialize blocked_on state
sched: Fix potentially missing balancing with Proxy Exec
sched: Minimise repeated sched_proxy_exec() checking
sched: Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
MAINTAINERS: Add K Prateek Nayak to scheduler reviewers
sched/core: Get this cpu once in ttwu_queue_cond()
...
Merge tag 'perf-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core updates:
- Try to allocate task_ctx_data quickly, to optimize O(N^2) algorithm
on large systems with O(100k) threads (Namhyung Kim)
AMD PMU driver IBS support updates and fixes, by Ravi Bangoria:
- Fix interrupt accounting for discarded samples
- Fix a Zen5-specific quirk
- Fix PhyAddrVal handling
- Fix NMI-safety with perf_allow_kernel()
- Fix a race between event add and NMIs
Intel PMU driver updates:
- Only check GP counters for PEBS constraints validation (Dapeng Mi)
MSR driver:
- Turn SMI_COUNT and PPERF on by default, instead of a long list of
CPU models to enable them on (Kan Liang)
... and misc cleanups and fixes by Aldf Conte, Anshuman Khandual,
Namhyung Kim, Ravi Bangoria and Yen-Hsiang Hsu"
* tag 'perf-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/events: Replace READ_ONCE() with standard pgtable accessors
perf/x86/msr: Make SMI and PPERF on by default
perf/x86/intel/p4: Fix unused variable warning in p4_pmu_init()
perf/x86/intel: Only check GP counters for PEBS constraints validation
perf/x86/amd/ibs: Fix comment typo in ibs_op_data
perf/amd/ibs: Advertise remote socket capability
perf/amd/ibs: Enable streaming store filter
perf/amd/ibs: Enable RIP bit63 hardware filtering
perf/amd/ibs: Enable fetch latency filtering
perf/amd/ibs: Support IBS_{FETCH|OP}_CTL2[Dis] to eliminate RMW race
perf/amd/ibs: Add new MSRs and CPUID bits definitions
perf/amd/ibs: Define macro for ldlat mask and shift
perf/amd/ibs: Avoid race between event add and NMI
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
perf/amd/ibs: Preserve PhyAddrVal bit when clearing PhyAddr MSR
perf/amd/ibs: Limit ldlat->l3missonly dependency to Zen5
perf/amd/ibs: Account interrupt for discarded samples
perf/core: Simplify __detach_global_ctx_data()
perf/core: Try to allocate task_ctx_data quickly
perf/core: Pass GFP flags to attach_task_ctx_data()
Merge tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- KLP support updates and fixes (Song Liu)
- KLP-build script updates and fixes (Joe Lawrence)
- Support Clang RAX DRAP sequence, to address clang false positive
(Josh Poimboeuf)
- Reorder ORC register numbering to match regular x86 register
numbering (Josh Poimboeuf)
- Misc cleanups (Wentong Tian, Song Liu)
* tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: Reorder ORC register numbering
objtool: Support Clang RAX DRAP sequence
livepatch/klp-build: report patch validation fuzz
livepatch/klp-build: add terminal color output
livepatch/klp-build: provide friendlier error messages
livepatch/klp-build: improve short-circuit validation
livepatch/klp-build: fix shellcheck complaints
livepatch/klp-build: add Makefile with check target
livepatch/klp-build: add grep-override function
livepatch/klp-build: switch to GNU patch and recountdiff
livepatch/klp-build: support patches that add/remove files
objtool/klp: Correlate locals to globals
objtool/klp: Match symbols based on demangled_name for global variables
objtool/klp: Remove .llvm suffix in demangle_name()
objtool/klp: Also demangle global objects
objtool/klp: Use sym->demangled_name for symbol_name hash
objtool/klp: Remove trailing '_' in demangle_name()
objtool/klp: Remove redundant strcmp() in correlate_symbols()
objtool: Use section/symbol type helpers
Wolfram Sang [Tue, 14 Apr 2026 19:48:38 +0000 (21:48 +0200)]
Merge tag 'i2c-host-7.1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v7.1, part 1
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
Miscellaneous fixes and cleanups by Peter Zijlstra, Randy Dunlap,
Thomas Weißschuh, Davidlohr Bueso and Mikhail Gavrilov"
* tag 'locking-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
compiler: Simplify generic RELOC_HIDE()
locking: Add lock context annotations in the spinlock implementation
locking: Add lock context support in do_raw_{read,write}_trylock()
locking: Fix rwlock support in <linux/spinlock_up.h>
lockdep: Raise default stack trace limits when KASAN is enabled
cleanup: Optimize guards
jump_label: remove workaround for old compilers in initializations
jump_label: use ATOMIC_INIT() for initialization of .enabled
futex: Convert to compiler context analysis
locking/rwsem: Fix logic error in rwsem_del_waiter()
locking/rwsem: Add context analysis
locking/rtmutex: Add context analysis
locking/mutex: Add context analysis
compiler-context-analysys: Add __cond_releases()
locking/mutex: Remove the list_head from struct mutex
locking/semaphore: Remove the list_head from struct semaphore
locking/rwsem: Remove the list_head from struct rw_semaphore
rust: atomic: Update a safety comment in impl of `fetch_add()`
rust: sync: atomic: Update documentation for `fetch_add()`
rust: sync: atomic: Add fetch_sub()
...
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h a6bd339dbb351 ("net_sched: fix skb memory leak in deferred qdisc drops") ff2998f29f390 ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c 1acdfbdb516b ("net: airoha: Fix VIP configuration for AN7583 SoC") bf3471e6e6c0 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c f44218cd5e6a ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()") 7da62262ec96 ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
The kernel-doc comment header incorrectly referenced the function
name pse_control_find_net_by_id() instead of the actual function name
pse_control_find_by_id(). Correct the function name in the documentation
to match the implementation.
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the
pernet .pre_exit callback. This causes a hung task when another
thread holds rtnl_mutex - the cleanup_net workqueue (or the
setup_net failure rollback path) blocks indefinitely in
wg_netns_pre_exit() waiting to acquire the lock.
Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:
Add ->exit_rtnl() hook to struct pernet_operations."), where the
framework already holds RTNL and batches all callbacks under a
single rtnl_lock()/rtnl_unlock() pair, eliminating the contention
window.
The rcu_assign_pointer(wg->creating_net, NULL) is safe to move
from .pre_exit to .exit_rtnl (which runs after synchronize_rcu())
because all RCU readers of creating_net either use maybe_get_net()
- which returns NULL for a dying namespace with zero refcount - or
access net->user_ns which remains valid throughout the entire
ops_undo_list sequence.
Reported-by: syzbot+f2fbf7478a35a94c8b7c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?id=cb64c22a492202ca929e18262fdb8cb89e635c70 Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
[ Jason: added __net_exit and __read_mostly annotations that were missing. ] Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20260414153944.2742252-5-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fushuai Wang [Tue, 14 Apr 2026 15:39:41 +0000 (17:39 +0200)]
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
Replace call_rcu() + kmem_cache_free() with kfree_rcu() to simplify
the code and reduce function size.
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20260414153944.2742252-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'smp-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP core updates from Thomas Gleixner:
- Switch smp_call_on_cpu() to user system_percpu_wq instead of
system_wq a part of the ongoing workqueue restructuring
- Improve the CSD-lock diagnostics for smp_call_function_single() to
provide better debug mechanisms on weakly ordered systems.
- Cache the current CPU number once in smp_call_function*() instead of
retrieving it over and over.
- Add missing kernel-doc comments all over the place
* tag 'smp-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Use system_percpu_wq instead of system_wq
smp: Improve smp_call_function_single() CSD-lock diagnostics
smp: Get this_cpu once in smp_call_function
smp: Add missing kernel-doc comments
Bharath SM [Tue, 14 Apr 2026 16:18:04 +0000 (21:48 +0530)]
smb: client: add oplock level to smb3_open_done tracepoint
Add an oplock field to the smb3_open_done_class trace event to
show the granted oplock/lease level. Move the trace_smb3_open_done
call after smb2_parse_contexts() so the oplock value reflects
the parsed lease state (R/W/H flags).
Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Bharath SM [Tue, 14 Apr 2026 16:18:03 +0000 (21:48 +0530)]
smb: client: add tracepoint for local lock conflicts
Add smb3_lock_conflict tracepoint that fires when a byte-range
lock request conflicts with an existing cached lock. This helps
debug lock contention issues when locks are cached locally due
to oplocks/leases.
The trace includes both the requested and conflicting lock details:
- Requested: offset, length, type
- Conflicting: offset, length, type, pid (lock holder)
Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Bharath SM [Tue, 14 Apr 2026 16:18:02 +0000 (21:48 +0530)]
smb: client: add tracepoints for lock operations
Add tracepoints when lock operations are sent to the
server with details including lock offset, length, and flags.
smb3_lock_enter: before sending lock request
smb3_lock_done: lock acquired successfully
smb3_lock_err: lock request failed
smb3_lock_cached: lock granted from local cache (no server roundtrip)
Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Merge tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Make the handling of compat functions consistent and more robust
- Rework the underlying data store so that it is dynamically allocated,
which allows the conversion of the last holdout SPARC64 to the
generic VDSO implementation
- Rework the SPARC64 VDSO to utilize the generic implementation
- Mop up the left overs of the non-generic VDSO support in the core
code
- Expand the VDSO selftest and make them more robust
- Allow time namespaces to be enabled independently of the generic VDSO
support, which was not possible before due to SPARC64 not using it
- Various cleanups and improvements in the related code
* tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
timens: Use task_lock guard in timens_get*()
timens: Use mutex guard in proc_timens_set_offset()
timens: Simplify some calls to put_time_ns()
timens: Add a __free() wrapper for put_time_ns()
timens: Remove dependency on the vDSO
vdso/timens: Move functions to new file
selftests: vDSO: vdso_test_correctness: Add a test for time()
selftests: vDSO: vdso_test_correctness: Use facilities from parse_vdso.c
selftests: vDSO: vdso_test_correctness: Handle different tv_usec types
selftests: vDSO: vdso_test_correctness: Drop SYS_getcpu fallbacks
selftests: vDSO: vdso_test_gettimeofday: Remove nolibc checks
Revert "selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers"
random: vDSO: Remove ifdeffery
random: vDSO: Trim vDSO includes
vdso/datapage: Trim down unnecessary includes
vdso/datapage: Remove inclusion of gettimeofday.h
vdso/helpers: Explicitly include vdso/processor.h
vdso/gettimeofday: Add explicit includes
random: vDSO: Add explicit includes
MIPS: vdso: Explicitly include asm/vdso/vdso.h
...
Merge tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- A rework of the hrtimer subsystem to reduce the overhead for
frequently armed timers, especially the hrtick scheduler timer:
- Better timer locality decision
- Simplification of the evaluation of the first expiry time by
keeping track of the neighbor timers in the RB-tree by providing
a RB-tree variant with neighbor links. That avoids walking the
RB-tree on removal to find the next expiry time, but even more
important allows to quickly evaluate whether a timer which is
rearmed changes the position in the RB-tree with the modified
expiry time or not. If not, the dequeue/enqueue sequence which
both can end up in rebalancing can be completely avoided.
- Deferred reprogramming of the underlying clock event device. This
optimizes for the situation where a hrtimer callback sets the
need resched bit. In that case the code attempts to defer the
re-programming of the clock event device up to the point where
the scheduler has picked the next task and has the next hrtick
timer armed. In case that there is no immediate reschedule or
soft interrupts have to be handled before reaching the reschedule
point in the interrupt entry code the clock event is reprogrammed
in one of those code paths to prevent that the timer becomes
stale.
- Support for clocksource coupled clockevents
The TSC deadline timer is coupled to the TSC. The next event is
programmed in TSC time. Currently this is done by converting the
CLOCK_MONOTONIC based expiry value into a relative timeout,
converting it into TSC ticks, reading the TSC adding the delta
ticks and writing the deadline MSR.
As the timekeeping core has the conversion factors for the TSC
already, the whole back and forth conversion can be completely
avoided. The timekeeping core calculates the reverse conversion
factors from nanoseconds to TSC ticks and utilizes the base
timestamps of TSC and CLOCK_MONOTONIC which are updated once per
tick. This allows a direct conversion into the TSC deadline value
without reading the time and as a bonus keeps the deadline
conversion in sync with the TSC conversion factors, which are
updated by adjtimex() on systems with NTP/PTP enabled.
- Allow inlining of the clocksource read and clockevent write
functions when they are tiny enough, e.g. on x86 RDTSC and WRMSR.
With all those enhancements in place a hrtick enabled scheduler
provides the same performance as without hrtick. But also other
hrtimer users obviously benefit from these optimizations.
- Robustness improvements and cleanups of historical sins in the
hrtimer and timekeeping code.
- Rewrite of the clocksource watchdog.
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design,
which was made in the context of systems far smaller than today, is
based on the assumption that the to be monitored clocksource (TSC)
can be trivially compared against a known to be stable clocksource
(HPET/ACPI-PM timer).
Over the years this rather naive approach turned out to have major
flaws. Long delays between the watchdog invocations can cause wrap
arounds of the reference clocksource. The access to the reference
clocksource degrades on large multi-sockets systems dure to
interconnect congestion. This has been addressed with various
heuristics which degraded the accuracy of the watchdog to the point
that it fails to detect actual TSC problems on older hardware which
exposes slow inter CPU drifts due to firmware manipulating the TSC to
hide SMI time.
The rewrite addresses this by:
- Restricting the validation against the reference clocksource to
the boot CPU which is usually closest to the legacy block which
contains the reference clocksource (HPET/ACPI-PM).
- Do a round robin validation betwen the boot CPU and the other
CPUs based only on the TSC with an algorithm similar to the TSC
synchronization code during CPU hotplug.
- Being more leniant versus remote timeouts
- The usual tiny fixes, cleanups and enhancements all over the place
* tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
alarmtimer: Access timerqueue node under lock in suspend
hrtimer: Fix incorrect #endif comment for BITS_PER_LONG check
posix-timers: Fix stale function name in comment
timers: Get this_cpu once while clearing the idle state
clocksource: Rewrite watchdog code completely
clocksource: Don't use non-continuous clocksources as watchdog
x86/tsc: Handle CLOCK_SOURCE_VALID_FOR_HRES correctly
MIPS: Don't select CLOCKSOURCE_WATCHDOG
parisc: Remove unused clocksource flags
hrtimer: Add a helper to retrieve a hrtimer from its timerqueue node
hrtimer: Remove trailing comma after HRTIMER_MAX_CLOCK_BASES
hrtimer: Mark index and clockid of clock base as const
hrtimer: Drop unnecessary pointer indirection in hrtimer_expire_entry event
hrtimer: Drop spurious space in 'enum hrtimer_base_type'
hrtimer: Don't zero-initialize ret in hrtimer_nanosleep()
hrtimer: Remove hrtimer_get_expires_ns()
timekeeping: Mark offsets array as const
timekeeping/auxclock: Consistently use raw timekeeper for tk_setup_internals()
timer_list: Print offset as signed integer
tracing: Use explicit array size instead of sentinel elements in symbol printing
...
Merge tag 'irq-msi-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt update from Thomas Gleixner:
"A small update for the MSI interrupt library to check for callers
which fail to provide the mandatory irq_write_msi_msg() callback,
which prevents a NULL pointer dereference later"
* tag 'irq-msi-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/msi-lib: Refuse initialization when irq_write_msi_msg() is missing
Merge tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- A large refactoring for the Renesas RZV2H driver to add new interrupt
types cleanly
- A large refactoring for the Renesas RZG2L driver to add support the
new RZ/G3L variant
- Add support for the new NXP S32N79 chip in the IMX irq-steer driver
- Add support for the Apple AICv3 variant
- Enhance the Loongson PCH LPC driver so it can be used on MIPS with
device tree firmware
- Allow the PIC32 EVIC driver to be built independent of MIPS in
compile tests
- The usual small fixes and enhancements all over the place
* tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqchip/irq-pic32-evic: Add __maybe_unused for board_bind_eic_interrupt in COMPILE_TEST
irqchip/renesas-rzv2h: Kill icu_err string
irqchip/renesas-rzv2h: Kill swint_names[]
irqchip/renesas-rzv2h: Kill swint_idx[]
irqchip/renesas-rzg2l: Add NMI support
irqchip/renesas-rzg2l: Clear the shared interrupt bit in rzg2l_irqc_free()
irqchip/renesas-rzg2l: Replace raw_spin_{lock,unlock} with guard() in rzg2l_irq_set_type()
irqchip/gic-v3: Print a warning for out-of-range interrupt numbers
irqchip/renesas-rzg2l: Add shared interrupt support
irqchip/renesas-rzg2l: Add RZ/G3L support
irqchip/renesas-rzg2l: Drop IRQC_IRQ_COUNT macro
irqchip/renesas-rzg2l: Drop IRQC_TINT_START macro
irqchip/renesas-rzg2l: Drop IRQC_NUM_IRQ macro
irqchip/renesas-rzg2l: Dynamically allocate fwspec array
irqchip/renesas-rzg2l: Split rzfive_irqc_{mask,unmask} into separate IRQ and TINT handlers
irqchip/renesas-rzg2l: Split rzfive_tint_irq_endisable() into separate IRQ and TINT helpers
irqchip/renesas-rzg2l: Replace rzg2l_irqc_irq_{enable,disable} with TINT-specific handlers
irqchip/renesas-rzg2l: Split set_type handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Split EOI handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Replace single irq_chip with per-region irq_chip instances
...
Merge tag 'irq-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq updates from Thomas Gleixner:
- Invoke add_interrupt_randomness() in handle_percpu_devid_irq() and
cleanup the workaround in the Hyper-V driver, which would now invoke
it twice on ARM64. Removing it from the driver requires to add it to
the x86 system vector entry point
- Remove the pointles cpu_read_lock() around reading CPU possible mask,
which is read only after init
- Add documentation for the interaction between device tree bindings
and the interrupt type defines in irq.h
- Delete stale defines in the matrix allocator and the equivalent in
loongarch
* tag 'irq-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Drivers: hv: Move add_interrupt_randomness() to hypervisor callback sysvec
genirq/chip: Invoke add_interrupt_randomness() in handle_percpu_devid_irq()
genirq/affinity: Remove cpus_read_lock() while reading cpu_possible_mask
genirq/matrix, LoongArch: Delete IRQ_MATRIX_BITS leftovers
genirq: Document interaction between <linux/irq.h> and DT binding defines
Paulo Alcantara [Tue, 14 Apr 2026 14:37:21 +0000 (11:37 -0300)]
vfs: get rid of BUG_ON() in d_mark_tmpfile_name()
Do proper error handling in d_mark_tmpfile_name() by returning errors
rather than using BUG_ON()'s.
Adjust caller to check for errors from d_mark_tmpfile_name() as well
as clean it up for using return value from scnprintf() in QSTR_LEN()
to make it more obvious where the tmpfile name's length is coming
from.
Link: https://lore.kernel.org/r/CAHk-=wgerpUKCDhdzKH0FEdLyfhj3doc9t+kO9Yb6rSsTp7hdQ@mail.gmail.com Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> CC: linux-fsdevel@vger.kernel.org Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Merge tag 'core-entry-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry code update from Thomas Gleixner:
"A trivial update for the entry code adding missing kernel
documentation for function arguments"
* tag 'core-entry-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Add missing kernel-doc for arch_ptrace_report_syscall functions
Merge tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nicolas Schier:
"Kbuild:
- reject unexpected values for LLVM=
- uapi: remove usage of toolchain headers
- switch from '-fms-extensions' to '-fms-anonymous-structs' when
available (currently: clang >= 23.0.0)
- reduce the number of compiler-generated suffixes for clang thin-lto
build
- reduce output spam ("GEN Makefile") when building out of tree
- improve portability for testing headers
- also test UAPI headers against C++ compilers
- drop build ID architecture allow-list in vdso_install
- only run checksyscalls when necessary
- update the debug information notes in reproducible-builds.rst
- expand inlining hints with -fdiagnostics-show-inlining-chain
Kconfig:
- forbid multiple entries with the same symbol in a choice
- error out on duplicated kconfig inclusion"
* tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (35 commits)
kbuild: expand inlining hints with -fdiagnostics-show-inlining-chain
kconfig: forbid multiple entries with the same symbol in a choice
Documentation: kbuild: Update the debug information notes in reproducible-builds.rst
checksyscalls: move instance functionality into generic code
checksyscalls: only run when necessary
checksyscalls: fail on all intermediate errors
checksyscalls: move path to reference table to a variable
kbuild: vdso_install: drop build ID architecture allow-list
kbuild: vdso_install: gracefully handle images without build ID
kbuild: vdso_install: hide readelf warnings
kbuild: vdso_install: split out the readelf invocation
kbuild: uapi: also test UAPI headers against C++ compilers
kbuild: uapi: provide a C++ compatible dummy definition of NULL
kbuild: uapi: handle UML in architecture-specific exclusion lists
kbuild: uapi: move all include path flags together
kbuild: uapi: move some compiler arguments out of the command definition
check-uapi: use dummy libc includes
check-uapi: honor ${CROSS_COMPILE} setting
check-uapi: link into shared objects
kbuild: reduce output spam when building out of tree
...
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
The HP Omen 16-wf1xxx (board ID: 8C77) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C77 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Thomas Arici <absolute3d86@gmail.com> Reported-by: Thomas Arici <absolute3d86@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221300 Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com> Link: https://patch.msgid.link/20260410191039.125659-5-krishna.chomal108@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
The HP Omen 16-n0xxx (board ID: 8A44) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.
Testing on board 8A44 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Prasoon Dev <prasoon5050@outlook.com> Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com> Link: https://patch.msgid.link/20260410191039.125659-4-krishna.chomal108@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
The HP OMEN MAX 16-ak0xxx (8D87) requires the same WMI queries as other
Victus S devices, hence it has been added to the corresponding list.
For this reason, platform_profile_victus_s_get_ec() will be called
during thermal_profile_setup() and victus_s_powersource_event() to
obtain hardware state (platform profile) by reading from the Embedded
Controller, however, this particular board's EC does not seem to expose
the platform profile value, unlike other boards. Hence EC readback is
disabled.
Testing on board 8D87 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Jinyang Zhu <Jakie101@proton.me> Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com> Link: https://patch.msgid.link/20260410191039.125659-3-krishna.chomal108@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For Victus S devices, the BIOS fan table header was being incorrectly
parsed as:
struct {
u8 unknown;
u8 num_entries;
}
The first field should be num_fans and the second should be unknown. It
is pure coincidence that interpreting an "unknown" field as "num_entries"
worked on multiple device, however for board 8D87 (in an upcoming patch),
this assumption fails, and the hp-wmi driver fails to load.
We fix this by correcting the header definition and compensating for
num_entries by parsing each entry of the fan table until an all-NULL row
is obtained, mirroring the behavior of OMEN Gaming Hub on Windows.
Fixes: 46be1453e6e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models") Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com> Link: https://patch.msgid.link/20260410191039.125659-2-krishna.chomal108@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge tag 'bitmap-for-v7.1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- new API: bitmap_weight_from() and bitmap_weighted_xor() (Yury)
- drop unused __find_nth_andnot_bit() (Yury)
- new tests and test improvements (Andy, Akinobu, Yury)
- fixes for count_zeroes API (Yury)
- cleanup bitmap_print_to_pagebuf() mess (Yury)
- documentation updates (Andy, Kai, Kit).
* tag 'bitmap-for-v7.1' of https://github.com/norov/linux: (24 commits)
bitops: Update kernel-doc for sign_extendXX()
powerpc/xive: simplify xive_spapr_debug_show()
thermal: intel: switch cpumask_get() to using cpumask_print_to_pagebuf()
coresight: don't use bitmap_print_to_pagebuf()
lib/prime_numbers: drop temporary buffer in dump_primes()
drm/xe: switch xe_pagefault_queue_init() to using bitmap_weighted_or()
ice: use bitmap_empty() in ice_vf_has_no_qs_ena
ice: use bitmap_weighted_xor() in ice_find_free_recp_res_idx()
bitmap: introduce bitmap_weighted_xor()
bitmap: add test_zero_nbits()
bitmap: exclude nbits == 0 cases from bitmap test
bitmap: test bitmap_weight() for more
asm-generic/bitops: Fix a comment typo in instrumented-atomic.h
bitops: fix kernel-doc parameter name for parity8()
lib: count_zeros: unify count_{leading,trailing}_zeros()
lib: count_zeros: fix 32/64-bit inconsistency in count_trailing_zeros()
lib: crypto: fix comments for count_leading_zeros()
x86/topology: use bitmap_weight_from()
bitmap: add bitmap_weight_from()
lib/find_bit_benchmark: avoid clearing randomly filled bitmap in test_find_first_bit()
...
Merge tag 'docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A busier cycle than I had expected for docs, including:
- Translations: some overdue updates to the Japanese translations,
Chinese translations for some of the Rust documentation, and the
beginnings of a Portuguese translation.
- New documents covering CPU isolation, managed interrupts, debugging
Python gbb scripts, and more.
- More tooling work from Mauro, reducing docs-build warnings, adding
self tests, improving man-page output, bringing in a proper C
tokenizer to replace (some of) the mess of kernel-doc regexes, and
more.
- Update and synchronize changes.rst and scripts/ver_linux, and put
both into alphabetical order.
... and a long list of documentation updates, typo fixes, and general
improvements"
* tag 'docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (162 commits)
Documentation: core-api: real-time: correct spelling
doc: Add CPU Isolation documentation
Documentation: Add managed interrupts
Documentation: seq_file: drop 2.6 reference
docs/zh_CN: update rust/index.rst translation
docs/zh_CN: update rust/quick-start.rst translation
docs/zh_CN: update rust/coding-guidelines.rst translation
docs/zh_CN: update rust/arch-support.rst translation
docs/zh_CN: sync process/2.Process.rst with English version
docs/zh_CN: fix an inconsistent statement in dev-tools/testing-overview
tracing: Documentation: Update histogram-design.rst for fn() handling
docs: sysctl: Add documentation for /proc/sys/xen/
Docs: hid: intel-ish-hid: make long URL usable
Documentation/kernel-parameters: fix architecture alignment for pt, nopt, and nobypass
sched/doc: Update yield_task description in sched-design-CFS
Documentation/rtla: Convert links to RST format
docs: fix typos and duplicated words across documentation
docs: fix typo in zoran driver documentation
docs: add an Assisted-by mention to submitting-patches.rst
Revert "scripts/checkpatch: add Assisted-by: tag validation"
...
Sami Mujawar [Fri, 10 Apr 2026 16:36:36 +0000 (17:36 +0100)]
virt: arm-cca-guest: fix error check for RSI_INCOMPLETE
The RSI interface can return RSI_INCOMPLETE when a report spans
multiple granules. This is an expected condition and should not be
treated as a fatal error.
Currently, arm_cca_report_new() checks for `info.result != RSI_SUCCESS`
and bails out, which incorrectly flags RSI_INCOMPLETE as a failure.
Fix the check to only break out on results other than RSI_SUCCESS or
RSI_INCOMPLETE.
This ensures partial reports are handled correctly and avoids spurious
-ENXIO errors when generating attestation reports.
Fixes: 7999edc484ca ("virt: arm-cca-guest: TSM_REPORT support for realms") Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reported-by: Jagdish Gediya <Jagdish.Gediya@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Brown [Mon, 13 Apr 2026 15:44:11 +0000 (16:44 +0100)]
arm64/hwcap: Include kernel-hwcap.h in list of generated files
When adding generation for the kernel internal constants for hwcaps the
generated file was not explicitly flagged as such in the build system,
causing it to be regenerated on each build. This wasn't obvious when the
series the change was included in was developed since it was all about
changes that trigger rebuilds anyway.
Fixes: abed23c3c44f ("arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps") Reported-by: Marek Vasut <marex@nabladev.com> Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
====================
Follow-ups to nk_qlease net selftests
This is a set of follow-ups addressing [0]:
- Split netdevsim tests from HW tests in nk_qlease and move the SW
tests under selftests/net/
- Remove multiple ksft_run()s to fix the recently enforced hard-fail
- Move all the setup inside the test cases for the ones under
selftests/net/ (I'll defer the HW ones to David)
- Add more test coverage related to queue leasing behavior and corner
cases, so now we have 45 tests in nk_qlease.py with netdevsim
which does not need special HW
====================
Daniel Borkmann [Mon, 13 Apr 2026 22:08:06 +0000 (00:08 +0200)]
selftests/net: Add additional test coverage in nk_qlease
Add further netkit queue-lease coverage for netns lifecycle of the guest
and physical halves, channel resize across active leases, single-device
and multi-lessee scenarios, L3 mode operation, lease capacity exhaustion,
and corner-cases of e.g. queue-create rejection paths. Also make the tests
more robust by removing the time.sleep(0.1) after netns deletion and turn
them into a wait loop.
Full test run:
# ./nk_qlease.py
TAP version 13
1..45
ok 1 nk_qlease.test_remove_phys
ok 2 nk_qlease.test_double_lease
ok 3 nk_qlease.test_virtual_lessor
ok 4 nk_qlease.test_phys_lessee
ok 5 nk_qlease.test_different_lessors
ok 6 nk_qlease.test_queue_out_of_range
ok 7 nk_qlease.test_resize_leased
ok 8 nk_qlease.test_self_lease
ok 9 nk_qlease.test_create_tx_type
ok 10 nk_qlease.test_create_primary
ok 11 nk_qlease.test_create_limit
ok 12 nk_qlease.test_link_flap_phys
ok 13 nk_qlease.test_queue_get_virtual
ok 14 nk_qlease.test_remove_virt_first
ok 15 nk_qlease.test_multiple_leases
ok 16 nk_qlease.test_lease_queue_tx_type
ok 17 nk_qlease.test_invalid_netns
ok 18 nk_qlease.test_invalid_phys_ifindex
ok 19 nk_qlease.test_multi_netkit_remove_phys
ok 20 nk_qlease.test_single_remove_phys
ok 21 nk_qlease.test_link_flap_virt
ok 22 nk_qlease.test_phys_queue_no_lease
ok 23 nk_qlease.test_same_ns_lease
ok 24 nk_qlease.test_resize_after_unlease
ok 25 nk_qlease.test_lease_queue_zero
ok 26 nk_qlease.test_release_and_reuse
ok 27 nk_qlease.test_veth_queue_create
ok 28 nk_qlease.test_two_netkits_same_queue
ok 29 nk_qlease.test_l3_mode_lease
ok 30 nk_qlease.test_single_double_lease
ok 31 nk_qlease.test_single_different_lessors
ok 32 nk_qlease.test_cross_ns_netns_id
ok 33 nk_qlease.test_delete_guest_netns
ok 34 nk_qlease.test_move_guest_netns
ok 35 nk_qlease.test_resize_phys_no_reduction
ok 36 nk_qlease.test_delete_one_netkit_of_two
ok 37 nk_qlease.test_bind_rx_leased_phys_queue
ok 38 nk_qlease.test_resize_phys_shrink_past_leased
ok 39 nk_qlease.test_resize_virt_not_supported
ok 40 nk_qlease.test_lease_devices_down
ok 41 nk_qlease.test_lease_capacity_exhaustion
ok 42 nk_qlease.test_resize_phys_up
ok 43 nk_qlease.test_multi_ns_lease
ok 44 nk_qlease.test_multi_ns_delete_one
ok 45 nk_qlease.test_move_phys_netns
# Totals: pass:45 fail:0 xfail:0 xpass:0 skip:0 error:0
Daniel Borkmann [Mon, 13 Apr 2026 22:08:04 +0000 (00:08 +0200)]
tools/ynl: Make YnlFamily closeable as a context manager
YnlFamily opens an AF_NETLINK socket in __init__ but has no way
to release it other than leaving it to the GC. YnlFamily holds a
self reference cycle through SpecFamily's self.family = self
in its super().__init__() call, so refcount GC cannot reclaim
it and the socket stays open until the cyclic GC runs.
If a test creates a guest netns, instantiates a YnlFamily inside
it via NetNSEnter(), performs some test case work via Ynl, and
then deletes the netns, then the 'ip netns del' only drops the
mount binding and cleanup_net in the kernel never runs, so any
subsequent test case assertions that objects got cleaned up would
fail given this only gets triggered later via cyclic GC run.
Add an explicit close() that closes the netlink socket and wire
up the __enter__/__exit__ so callers can scope the instance
deterministically via 'with YnlFamily(...) as ynl: ...'.
Steven Rostedt [Tue, 14 Apr 2026 15:03:44 +0000 (11:03 -0400)]
tracefs: Removed unused 'ret' variable in eventfs_iterate()
Moving to guard() usage removed the need of using the 'ret' variable but
it wasn't removed. As it was set to zero, the compiler in use didn't warn
(although some compilers do).
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260414110344.75c0663f@robin Fixes: 4d9b262031f ("eventfs: Simplify code using guard()s") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202604100111.AAlbQKmK-lkp@intel.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
TOMOYO is treating numeric fields (including inode->i_ino) as "unsigned
long". Now that commit 0b2600f81cef ("treewide: change inode->i_ino from
unsigned long to u64") went upstream, update affected portions in TOMOYO.
While an administrator might write a rule that compares inode->i_ino with
an immediate value, this patch changes type of variable for inode->i_ino
to "u64" but does not change type of variable for the corresponding
immediate value to "u64" due to the following reasons.
It is likely that rules that compare inode->i_ino are for testing whether
the directories involved in e.g. rename() operation are the same (i.e.
comparison between two inode->i_ino values rather than one inode->i_ino
value and one immediate value).
It unlikely makes sense to compare inode->i_ino with an immediate value
larger than UINT_MAX.
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
snd_ctl_elem_init_enum_names() advances pointer p through the names
buffer while decrementing buf_len. If buf_len reaches zero but items
remain, the next iteration calls strnlen(p, 0).
While strnlen(p, 0) returns 0 and would hit the existing name_len == 0
error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks
maxlen against __builtin_dynamic_object_size(). When Clang loses track
of p's object size inside the loop, this triggers a BRK exception panic
before the return value is examined.
Add a buf_len == 0 guard at the loop entry to prevent calling fortified
strnlen() on an exhausted buffer.
Found by kernel fuzz testing through Xiaomi Smartphone.
Fixes: 8d448162bda5 ("ALSA: control: add support for ENUMERATED user space controls") Cc: stable@vger.kernel.org Signed-off-by: Ziqing Chen <chenziqing@xiaomi.com> Link: https://patch.msgid.link/20260414132437.261304-1-chenziqing@xiaomi.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lorenzo Bianconi [Sun, 12 Apr 2026 08:43:26 +0000 (10:43 +0200)]
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
Add the following PPE configuration in airoha_ppe_hw_init routine:
- 6RD hw offloading is currently not supported by Netfilter flowtable.
Disable explicitly PPE 6RD offloading in order to prevent PPE to learn
6RD flows and eventually interrupt the traffic.
- Add missing PPE bind rate configuration for L3 and L2 traffic.
PPE bind rate configuration specifies the pps threshold to move a PPE
entry state from UNBIND to BIND. Without this configuration this value
is random.
- Set ageing thresholds to the values used in the vendor SDK in order to
improve connection stability under load and avoid packet loss caused by
fast aging.
spi: dt-bindings: fsl: Correct GPIO flags in the example
IRQ_TYPE_xxx flags are not correct in the context of GPIO flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: IRQ_TYPE_EDGE_RISING = 1 = GPIO_ACTIVE_LOW.
Correct the example DTS to use proper flags for chip select GPIOs,
assuming the author of the code wanted similar logical behavior:
The platform name will be used in the topology name.
Fixes: d3df422f66e8a ("ASoC: SOF: Intel: add initial support for NVL-S") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20260413060800.3156425-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
The platform name will be used in the topology name.
Fixes: 1800bcdc68ead ("ASoC: SOF: Intel: add support for Nova Lake NVL") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20260413060800.3156425-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Lorenzo Bianconi [Sun, 12 Apr 2026 07:57:29 +0000 (09:57 +0200)]
net: airoha: Fix VIP configuration for AN7583 SoC
EN7581 and AN7583 SoCs have different VIP definitions. Introduce
get_vip_port callback in airoha_eth_soc_data struct in order to take
into account EN7581 and AN7583 VIP register layout and definition
differences.
Introduce nbq parameter in airoha_gdm_port struct. At the moment nbq
is set statically to value previously used in airhoha_set_gdm2_loopback
routine and it will be read from device tree in subsequent patches.
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless.
Fixes: 43e369210108 ("caif: Move refcount from service layer to sock and dev.") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/9f3d37847c0037568aae698ca23cd47c6691acb0.1775897577.git.zcliangcn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shuming Fan [Tue, 14 Apr 2026 07:14:41 +0000 (15:14 +0800)]
ASoC: rt1320: fix the warning 'rae_fw' from request_firmware() not released
New smatch warnings:
sound/soc/codecs/rt1320-sdw.c:1575 rt1320_rae_load() warn: 'rae_fw' from
request_firmware() not released on lines: 1575.
Fixes: 22937af75abb ("ASoC: rt1320: support RAE parameters loading") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202604111548.EL450PMb-lkp@intel.com/ Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://patch.msgid.link/20260414071441.1524039-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
net: strparser: fix skb_head leak in strp_abort_strp()
When the stream parser is aborted, for example after a message assembly timeout,
it can still hold a reference to a partially assembled message in
strp->skb_head.
That skb is not released in strp_abort_strp(), which leaks the partially
assembled message and can be triggered repeatedly to exhaust memory.
Fix this by freeing strp->skb_head and resetting the parser state in the
abort path. Leave strp_stop() unchanged so final cleanup still happens in
strp_done() after the work and timer have been synchronized.
Fixes: 43a0c6751a32 ("strparser: Stream parser for messages") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Luxiao Xu <rakukuip@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/ade3857a9404999ce9a1c27ec523efc896072678.1775482694.git.rakukuip@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ALSA: usb-audio: Fix missing error handling for get_min_max*()
The recent fix to add the error return value check from get_min_max*()
missed one case in build_audio_procunit() where no error value is set.
This may lead to an uninitialized variable and confuse the caller
(although this wouldn't happen practically because err is set for the
loop of num_ins at the beginning of the funciton).
Fix it by setting "err = 0" properly at the missing case, too.
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
dw_mipi_dsi_host_attach() and dw_mipi_dsi2_host_attach() call
drm_bridge_add() before pdata->host_ops->attach(). If attach fails,
the bridge stayed registered without drm_bridge_remove(), leaking the
bridge reference and leaving the device on the global bridge list.
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver.
Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: stable <stable@kernel.org> Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2026041134-dreamboat-buddhism-d1ec@gregkh Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tom Zanussi [Mon, 13 Apr 2026 22:35:38 +0000 (17:35 -0500)]
selftests/ftrace: Add test case for fully-qualified variable references
This test adds a variable (ts0) to two events (sched_waking and
sched_wakeup) and uses a fully-qualified variable reference to expicitly
choose a particular one (sched_wakeup.$ts0) when calculating the wakeup
latency.
Tom Zanussi [Mon, 13 Apr 2026 22:35:37 +0000 (17:35 -0500)]
tracing: Fix fully-qualified variable reference printing in histograms
The syntax for fully-qualified variable references in histograms is
subsys.event.$var, which is parsed correctly, but not displayed correctly
when printing a histogram spec. The current code puts the $ reference at
the beginning of the fully-qualified variable name i.e. $subsys.event.var,
which is incorrect.
Douglas Anderson [Tue, 14 Apr 2026 02:59:11 +0000 (19:59 -0700)]
driver core: Add kernel-doc for DEV_FLAG_COUNT enum value
Even though nobody should use this value (except when declaring the
"flags" bitmap), kernel-doc still gets upset that it's not documented.
It reports:
WARNING: ../include/linux/device.h:519
Enum value 'DEV_FLAG_COUNT' not described in enum 'struct_device_flags'
Add the description of DEV_FLAG_COUNT.
Fixes: a2225b6e834a ("driver core: Don't let a device probe until it's ready") Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/f318cd43-81fd-48b9-abf7-92af85f12f91@infradead.org Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20260413195910.1.I23aca74fe2d3636a47df196a80920fecb2643220@changeid Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This function gets a device_node reference via
of_graph_get_remote_port_parent() and stores it in encoder_node, but never
puts that reference. Add it.
There used to be a of_node_put(encoder_node) but it has been removed by
mistake during a rework in commit 3ea66a794fdc ("drm/arc: Inline
arcpgu_drm_hdmi_init").
David Carlier [Mon, 13 Apr 2026 19:06:01 +0000 (20:06 +0100)]
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.
For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.
Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration.
Fixes: 8cf868affdc4 ("tracing: Have the reg function allow to fail") Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260413190601.21993-1-devnexen@gmail.com Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ring-buffer: Prevent off-by-one array access in ring_buffer_desc_page()
As pointed out by Smatch, the ring-buffer descriptor array page_va is
counted by nr_page_va, but the accessor ring_buffer_desc_page() allows
access off by one.
Currently, this does not cause problems, as the page ID always comes
from a trusted source. Nonetheless, ensure robustness and fix the
accessor. While at it, make the page_id unsigned.
tracing: Rebuild full_name on each hist_field_name() call
hist_field_name() uses a static MAX_FILTER_STR_VAL buffer for fully
qualified variable-reference names, but it currently appends into that
buffer with strcat() without rebuilding it first. As a result, repeated
calls append a new "system.event.field" name onto the previous one,
which can eventually run past the end of full_name.
Build the name with snprintf() on each call and return NULL if the fully
qualified name does not fit in MAX_FILTER_STR_VAL.
Link: https://patch.msgid.link/20260401112224.85582-1-pengpeng@iscas.ac.cn Fixes: 067fe038e70f ("tracing: Add variable reference handling to hist triggers") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Tested-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
====================
net,bpf: fix null-ptr-deref in xdp_master_redirect() for bonding and add selftest
From: Jiayuan Chen <jiayuan.chen@shopee.com>
This series has gone through several rounds of discussion and the
maintainers hold different views on where the fix should live (in the
generic xdp_master_redirect() path vs. inside bonding). I respect all
of the suggestions, but I would like to get the crash fixed first, so
this version takes the approach of checking whether the master device
is up in xdp_master_redirect(), as suggested by Daniel Borkmann. If a
different shape is preferred later it can be done as a follow-up, but
the null-ptr-deref should not linger.
syzkaller reported a kernel panic, full decoded trace here:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
Problem Description
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter without a NULL
check. rr_tx_counter is a per-CPU counter that bonding only allocates
in bond_open() when the mode is round-robin. If the bond device was
never brought up, rr_tx_counter stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Solution
Patch 1: Fix this in the generic xdp_master_redirect() by skipping
master interception when the master device is not running. Returning
XDP_TX keeps the original XDP_TX behaviour on the receiving slave, and
avoids calling into any master ->ndo_xdp_get_xmit_slave() on a device
that has not fully initialized its XDP state. This is not specific to
bonding: any current or future master that defers XDP state allocation
to ->ndo_open() is protected.
Patch 2: Add a selftest that reproduces the above scenario.
selftests/bpf: add test for xdp_master_redirect with bond not up
Add a selftest that reproduces the null-ptr-deref in
bond_rr_gen_slave_id() when XDP redirect targets a bond device in
round-robin mode that was never brought up. The test verifies the fix
by ensuring no crash occurs.
Test setup:
- bond0: active-backup mode, UP, with native XDP (enables
bpf_master_redirect_enabled_key globally)
- bond1: round-robin mode, never UP
- veth1: slave of bond1, with generic XDP (XDP_TX)
- BPF_PROG_TEST_RUN with live frames triggers the redirect path
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected.
Fixes: 879af96ffd72 ("net, core: Add support for XDP redirection to slave device") Reported-by: syzbot+80e046b8da2820b6ba73@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/698f84c6.a70a0220.2c38d7.00cc.GAE@google.com/T/ Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://patch.msgid.link/20260411005524.201200-2-jiayuan.chen@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cao Ruichuang [Mon, 6 Apr 2026 16:53:33 +0000 (00:53 +0800)]
ring-buffer: Report header_page overwrite as char
The header_page tracefs metadata currently reports overwrite as an
int field with size 1. That makes parsers warn about a type and
size mismatch even though the field is only used as a one-byte flag
within commit.
Keep the shared offset with commit as-is, but report overwrite as
char so the declared type matches the hardcoded size. The signedness
is already carried separately by the emitted signed field.
selftests/namespaces: remove unused utils.h include from listns_efault_test
Remove the inclusion of ../filesystems/utils.h from listns_efault_test.c.
The test doesn't use any symbols from that header. Including it alongside
../pidfd/pidfd.h causes a build failure because both headers define
wait_for_pid() with conflicting linkage:
../filesystems/utils.h: extern int wait_for_pid(pid_t pid);
../pidfd/pidfd.h: static inline int wait_for_pid(pid_t pid)
All symbols the test actually uses (create_child, read_nointr,
write_nointr, sys_pidfd_send_signal) come from pidfd.h.
selftests/fsmount_ns: add missing TARGETS and fix cap test
Add missing top-level kselftest TARGETS entries for empty_mntns and
fsmount_ns so that 'make kselftest' discovers and runs these tests.
Fix requires_cap_sys_admin test which always SKIPped because fsopen()
was called after enter_userns(), where CAP_SYS_ADMIN in the mount
namespace's user_ns is unavailable. Move fsopen/fsconfig before fork so
the configured fs_fd is inherited by the child, which then only needs to
call fsmount() after dropping privileges.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests") Signed-off-by: Christian Brauner <brauner@kernel.org>
empty_mntns.h includes ../statmount/statmount.h which provides a
4-argument statmount_alloc(mnt_id, mnt_ns_id, mask, flags), but then
redefines its own 3-argument version without the flags parameter. This
causes a build failure due to conflicting types.
Remove the duplicate definition from empty_mntns.h and update all
callers to pass 0 for the flags argument.
Fixes: 32f54f2bbccf ("selftests/filesystems: add tests for empty mount namespaces") Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the local static wait_for_pid() definition from
statmount_test_ns.c as it conflicts with the extern declaration in
utils.h. The identical function is already provided by utils.c.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests") Cc: <stable@kernel.org> # mainline only Signed-off-by: Christian Brauner <brauner@kernel.org>
projects / thirdparty / kernel / stable.git / log
