Robbie Ko [Fri, 8 May 2026 13:42:11 +0000 (21:42 +0800)]
btrfs: mark file extent range dirty after converting prealloc extents
When writing into a preallocated extent, ordered extent completion calls
btrfs_mark_extent_written() to convert the file extent item from the
BTRFS_FILE_EXTENT_PREALLOC type to the BTRFS_FILE_EXTENT_REG type.
If the preallocated extent was created beyond i_size with fallocate
keep-size, and the inode is evicted and loaded again before the write,
the inode's file_extent_tree is initialized only up to i_size.
The beyond i_size prealloc extent is therefore not tracked there.
After a write into that extent extends i_size, btrfs_mark_extent_written()
updates the file extent item, but the corresponding range is not marked
dirty in the inode's file_extent_tree.
This can leave disk_i_size stale when the filesystem does not use the
no-holes feature, so after remount the file size can go back to the old
value.
The following reproducer triggers the problem:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file
fallocate -n -l 2M $MNT/file
umount $MNT
mount $DEV $MNT
dd if=/dev/zero of=$MNT/file bs=1M count=1 conv=notrunc
ls -lh $MNT/file
umount $MNT
mount $DEV $MNT
ls -lh $MNT/file
umount $MNT
Running the reproducer gives the following result:
Fix this by marking the written range dirty in the inode's
file_extent_tree after successfully converting the prealloc extent to a
regular extent.
Fixes: 9ddc959e802b ("btrfs: use the file extent tree infrastructure") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Robbie Ko <robbieko@synology.com>
[ Minor change log updates ] Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
vsock/virtio: fix zerocopy completion for multi-skb sends
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit 1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Closes: https://sashiko.dev/#/patchset/20260420132051.217589-1-sgarzare%40redhat.com Reported-by: Maher Azzouzi <maherazz04@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Link: https://patch.msgid.link/20260514092948.268720-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sam Daly [Wed, 13 May 2026 16:42:53 +0000 (18:42 +0200)]
octeontx2-af: CGX: add bounds check to cgx_speed_mbps index
cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values
0-15. If it returns a value >= 13, this causes an out-of-bounds array
access. Add a bounds check and default to speed 0 if the index is out of
range.
Fixes: 61071a871ea6 ("octeontx2-af: Forward CGX link notifications to PFs") Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Linu Cherian <lcherian@marvell.com> Cc: Geetha sowjanya <gakula@marvell.com> Cc: hariprasad <hkelam@marvell.com> Cc: Subbaraya Sundeep <sbhatta@marvell.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: stable <stable@kernel.org> Signed-off-by: Sam Daly <sam@samdaly.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2026051352-refined-demise-e88d@gregkh Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dragos Tatulea [Wed, 13 May 2026 12:45:18 +0000 (15:45 +0300)]
IB/IPoIB: ndo_set_rx_mode_async conversion
The commit in the fixes tag added a warning for devices
that are netdev ops locked that they should be converted
to .ndo_set_rx_mode_async. IPoIB for mlx5 is such a
driver which was missed during the conversion because the
flow is more complex:
- mlx5 part of IPoIB device was converted to ops-lock in commit [1].
- ipoib_intf_init() then overrides netdev_ops with
ipoib_netdev_ops_{pf,vf}, which still wired ndo_set_rx_mode to the
legacy sync path -- tripping the new warning on every probe.
So now we have the following splat:
netdevice: ib0 (uninitialized): ops-locked drivers should use ndo_set_rx_mode_async
WARNING: net/core/dev.c:11366 at register_netdevice+0x83c/0x21d0
...
register_netdev+0x1f/0x40
ipoib_add_one+0x35c/0x880 [ib_ipoib]
This patch implements .ndo_set_rx_mode_async but it simply schedules the
multicast restart task like before. This is done to maintain the
assumption that this task and others [2] must run on the same order
workqueue to avoid racing with themselves. The race between
ipoib_mcast_join_task() and ipoib_mcast_restart_task() would be the most
obvious example.
Linus Torvalds [Sat, 16 May 2026 00:00:45 +0000 (17:00 -0700)]
Merge tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes pull, small and all over fixes, mostly xe and amdgpu,
with some ttm and a core fix for the handle change pain.
core:
- fix for the fix for the handle change race
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly"
* tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm: Replace old pointer to new idr
drm/loongson: Use managed KMS polling
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
drm/ttm: Convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
drm/gma500/oaktrail_lvds: fix i2c adapter leaks on init
drm/gma500/oaktrail_lvds: fix hang on init failure
drm/gma500/oaktrail_hdmi: fix i2c adapter leak on setup
drm/xe: Drop unused ggtt_balloon field
accel/qaic: Add overflow check to remap_pfn_range during mmap
drm/i915/dp: Fix VSC dynamic range signaling for RGB formats
drm/i915: skip __i915_request_skip() for already signaled requests
drm/bridge: imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
drm/amdgpu/gfx_v12_0: set gfx.rs64_enable from PFP header on GFX12
drm/amd/ras: Fix CPER ring debugfs read overflow
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
drm/amdgpu: fix userq hang detection and reset
drm/amdgpu: remove almost all calls to amdgpu_userq_detect_and_reset_queues
drm/amdgpu: rework amdgpu_userq_signal_ioctl v3
drm/amdgpu: remove deadlocks from amdgpu_userq_pre_reset
drm/xe/dma-buf: fix UAF with retry loop
...
Commit 5e28b7b94408 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") Reported-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7c9eed171647e421013 Cc: stable@vger.kernel.org Tested-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/tencent_C267296443AAA4567771176886DFF364A305@qq.com
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel.
Linus Torvalds [Fri, 15 May 2026 22:40:25 +0000 (15:40 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 MPAM fixes from Catalin Marinas:
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: Check whether the config array is allocated before destroying it
arm_mpam: Fix false positive assert failure during mpam_disable()
arm_mpam: Improve check for whether or not NRDY is hardware managed
arm_mpam: Pretend that NRDY is always hardware managed
arm_mpam: Fix monitor instance selection when checking for hardware NRDY
Linus Torvalds [Fri, 15 May 2026 22:22:26 +0000 (15:22 -0700)]
Merge tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"This is probably the largest fixes pull-request ever sent for IOMMU. I
partially blame it on AI code review which found some issues but there
is also some rework in here to fix issues in the iommu parts of PCI
device reset.
AMD-Vi:
- Add bounds checks to debugfs and table lookups
Intel VT-d:
- Apply an existing quirk for Q35 graphic device
- Skip dev_pasid teardown for the blocked domain to avoid
out-of-bounds access
- Return early if dev_pasid is missing to prevent NULL dereference
or UAF
Core:
- Fix bugs and corner cases in pci_dev_reset_iommu_prepare/done()
- Fix various issues found by AI in iommupt code
MAINTAINERS email address update for RISCV IOMMU"
* tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: update Tomasz Jeznach's email address
iommupt: Fix the end_index calculation in __map_range_leaf()
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
iommu: Handle unmap error when iommu_debug is enabled
iommu: Fix up map/unmap debugging for iommupt domains
iommu: Fix loss of errno on map failure for classic ops
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
iommu/vt-d: Fix oops due to out of scope access
iommu/vt-d: Disable DMAR for Intel Q35 IGFX
iommu: Warn on premature unblock during DMA aliased sibling reset
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
iommu: Fix ATS invalidation timeouts during __iommu_remove_group_pasid()
iommu: Fix nested pci_dev_reset_iommu_prepare/done()
iommu: Fix pasid attach in pci_dev_reset_iommu_prepare/done()
iommu: Replace per-group resetting_domain with per-gdev blocked flag
iommu: Fix kdocs of pci_dev_reset_iommu_done()
iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done()
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
Linus Torvalds [Fri, 15 May 2026 22:13:02 +0000 (15:13 -0700)]
Merge tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Convert vfio-pci BAR resource requests and iomaps initialization
from a lazy, on-demand model to an eager pre-allocation model to
avoid races while preserving legacy error behavior. Fix unchecked
barmap access in dma-buf export path (Matt Evans)
- Introduce an implicit unsigned cast in converting vfio-pci device
offsets to region indexes, closing a potential out-of-bounds
access through the vfio_pci_ioeventfd() interface (Matt Evans)
- Fix a dma-buf kref underflow and stuck wait_for_completion() when
closing a previously revoked dma-buf (Alex Williamson)
* tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check BAR resources before exporting a DMABUF
vfio/pci: Set up BAR resources and maps in vfio_pci_core_enable()
vfio/pci: Make VFIO_PCI_OFFSET_TO_INDEX() return unsigned
vfio/pci: fix dma-buf kref underflow after revoke
Linus Torvalds [Fri, 15 May 2026 21:52:17 +0000 (14:52 -0700)]
Merge tag 'v7.1-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix integer overflow in read
- Fix smbdirect error cleanup
- Multichannel reconnect fix
- Add some missing defines and correct some references to protocol spec
- Fix oob symlink read
* tag 'v7.1-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smbdirect: Fix error cleanup in smbdirect_map_sges_from_iter()
smb: client: avoid integer overflow in SMB2 READ length check
cifs: client: stage smb3_reconfigure() updates and restore ctx on failure
smb/client: fix possible infinite loop and oob read in symlink_data()
SMB3.1.1: add missing QUERY_DIR info levels
Linus Torvalds [Fri, 15 May 2026 21:48:09 +0000 (14:48 -0700)]
Merge tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"An important patch from Hristo that squashes a folio reference leak
that could lead to OOM kills in CephFS and a number of miscellaneous
fixes from Raphael and Slava.
All but two are marked for stable"
* tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential null-ptr-deref in decode_choose_args()
libceph: handle rbtree insertion error in decode_choose_args()
libceph: Fix potential out-of-bounds access in osdmap_decode()
ceph: put folios not suitable for writeback
ceph: add ceph_has_realms_with_quotas() check to ceph_quota_update_statfs()
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
ceph: fix a buffer leak in __ceph_setxattr()
libceph: Fix unnecessarily high ceph_decode_need() for uniform bucket
libceph: Fix potential out-of-bounds access in crush_decode()
Linus Torvalds [Fri, 15 May 2026 20:22:07 +0000 (13:22 -0700)]
Merge tag 'for-7.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixup warning when allocating memory for readahead, __GFP_NOWARN was
accidentally dropped when setting mapping constraints
- in tracepoint of file sync, fix sleeping in atomic context when
handling dentries
- harden initial loading of block group on crafted/fuzzed images,
iterate all chunk mapping entries unconditionally
- fix freeing pages of submitted io after checking for errors
- fix incorrect inode size after remount when using fallocate KEEP_SIZE
mode (also requires disabled 'no-holes' feature)
* tag 'for-7.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect i_size after remount caused by KEEP_SIZE prealloc gap
btrfs: only release the dirty pages io tree after successful writes
btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file()
btrfs: always pass __GFP_NOWARN from add_ra_bio_pages()
btrfs: fix check_chunk_block_group_mappings() to iterate all chunk maps
Linus Torvalds [Fri, 15 May 2026 20:17:46 +0000 (13:17 -0700)]
Merge tag 'xfs-fixes-7.1-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A few bug fixes, nothing really special stands out"
* tag 'xfs-fixes-7.1-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Fix typo in comment
xfs: fix the "limiting open zones" message
xfs: flush delalloc blocks on ENOSPC in xfs_trans_alloc_icreate
xfs: check da node block pad field during scrub
xfs: fix memory leak for data allocated by xfs_zone_gc_data_alloc()
xfs: fix memory leak on error in xfs_alloc_zone_info()
xfs: check directory data block header padding in scrub
xfs: zero directory data block padding on write verification
xfs: zero entire directory data block header region at init
xfs: remove the meaningless XFS_ALLOC_FLAG_FREEING
Linus Torvalds [Fri, 15 May 2026 20:11:41 +0000 (13:11 -0700)]
Merge tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Fixes for this release:
- Correctness fix for the new sunrpc cache netlink protocol
Marked for stable:
- Correctness fixes for delegated attributes
- Prevent an infinite loop when revoking layouts"
* tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix infinite loop in layout state revocation
sunrpc: start cache request seqno at 1 to fix netlink GET_REQS
nfsd: update mtime/ctime on COPY in presence of delegated attributes
nfsd: update mtime/ctime on CLONE in presense of delegated attributes
nfsd: fix file change detection in CB_GETATTR
nfsd: fix GET_DIR_DELEGATION when VFS leases are disabled
Linus Torvalds [Fri, 15 May 2026 19:47:00 +0000 (12:47 -0700)]
Merge tag 'block-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe merge request via Keith:
- Fix memory leak on a passthrough integrity mapping failure (Keith)
- Hide secrets behind debug option (Hannes)
- Fix pci use-after-free for host memory buffer (Chia-Lin Kao)
- Fix tcp taregt use-after-free for data digest (Sagi)
- Revert a mistaken quirk (Alan Cui)
- Fix uevent and controller state race condition (Maurizio)
- Fix apple submission queue re-initialization (Nick Chan)
- Three fixes for blk-integrity, fixing an issue with the user data
mapping and two problems with recomputing number of segments
- Two fixes for the iov_iter bounce buffering
- Fix for the handling of dead zoned write plugs
- ublk max_sectors validation fix, with associated selftest addition
* tag 'block-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
nvme-apple: Reset q->sq_tail during queue init
block: align down bounces bios
block: pass a minsize argument to bio_iov_iter_bounce
selftests: ublk: cap nthreads to kernel's actual nr_hw_queues
block: fix handling of dead zone write plugs
block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()
block: recompute nr_integrity_segments in blk_insert_cloned_request
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
nvme: fix race condition between connected uevent and STARTED_ONCE flag
Revert "nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808"
nvmet-tcp: Fix potential UAF when ddgst mismatch
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvmet-auth: Do not print DH-HMAC-CHAP secrets
nvme: fix bio leak on mapping failure
nvme: make prp passthrough usage less scary
ublk: reject max_sectors smaller than PAGE_SECTORS in parameter validation
Linus Torvalds [Fri, 15 May 2026 19:34:02 +0000 (12:34 -0700)]
Merge tag 'io_uring-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Small series sanitizing the locking done for either modifying or
reading a chain of requests
- If the application has a pid namespace, ensure that the sqthread pid
is correctly printed in fdinfo
- Fix for a hashing issue in the io-wq thread pool, which could lead to
a use-after-free
- Kill dead argument from io_prep_rw_pi()
- Fix for a missed validation of the CQ ring head, affecting CQE refill
* tag 'io_uring-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: validate user-controlled cq.head in io_cqe_cache_refill()
io-wq: check that the predecessor is hashed in io_wq_remove_pending()
io_uring/rw: drop unused attr_type_mask from io_prep_rw_pi()
io_uring: hold uring_lock across io_kill_timeouts() in cancel path
io_uring: defer linked-timeout chain splice out of hrtimer context
io_uring: hold uring_lock when walking link chain in io_wq_free_work()
io_uring/fdinfo: translate SqThread PID through caller's pid_ns
Linus Torvalds [Fri, 15 May 2026 19:27:03 +0000 (12:27 -0700)]
Merge tag 'hardening-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- gcc-plugins: Fix GCC 16 removal of CONST_CAST macros
* tag 'hardening-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: Always define CONST_CAST_GIMPLE and CONST_CAST_TREE
Linus Torvalds [Fri, 15 May 2026 19:24:09 +0000 (12:24 -0700)]
Merge tag 'docs-7.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation fixes from Jonathan Corbet:
"This is Willy Tarreau's new document clarifying the definition and
handling of security-related bugs, which we're trying to get out there
quickly on the theory that some of the bug reporters might actually
read and pay attention to it"
* tag 'docs-7.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: threat-model: don't limit root capabilities to CAP_SYS_ADMIN
docs: security-bugs: add a link to the threat-model documentation
Documentation: security-bugs: clarify requirements for AI-assisted reports
Documentation: security-bugs: explain what is and is not a security bug
Documentation: security-bugs: do not systematically Cc the security team
Arnd Bergmann [Fri, 15 May 2026 10:57:09 +0000 (12:57 +0200)]
ring-buffer remote: Avoid unexpected symbol warnings (arm, s390)
The now more verbose check found more architecture specific symbol
missing from the whitelist, during randconfig testing on s390
and 32-bit arm:
Unexpected symbols in kernel/trace/simple_ring_buffer.o:
U __aeabi_unwind_cpp_pr1
Unexpected symbols in kernel/trace/simple_ring_buffer.o:
U __s390_indirect_jump_r1
U __s390_indirect_jump_r10
U __s390_indirect_jump_r14
U __s390_indirect_jump_r2
U __s390_indirect_jump_r5
U __s390_indirect_jump_r7
U __s390_indirect_jump_r8
U __s390_indirect_jump_r9
make[6]: *** [/home/arnd/arm-soc/kernel/trace/Makefile:160: kernel/trace/simple_ring_buffer.o.checked] Error 1
Add these to the list and keep it roughly sorted into sanitizer
and architecture symbols.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://patch.msgid.link/20260515105717.1023007-1-arnd@kernel.org Fixes: 1211907ac0b5 ("tracing: Generate undef symbols allowlist for simple_ring_buffer") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Fri, 15 May 2026 18:24:51 +0000 (11:24 -0700)]
Merge tag 'for-linus-7.1b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- one simple cleanup
- a fix for a corner case when running as Xen PV dom0
- a fix of a regression for Xen PV guests, introduced in 7.0
* tag 'for-linus-7.1b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Tolerate nested XEN_LAZY_MMU entering/leaving
x86/xen: Fix xen_e820_swap_entry_with_ram()
xen/arm: Replace __ASSEMBLY__ with __ASSEMBLER__ in interface.h
Linus Torvalds [Fri, 15 May 2026 18:12:54 +0000 (11:12 -0700)]
Merge tag 'platform-drivers-x86-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-nb-wmi:
- Use existing keyboard quirk for ASUS Zenbook Duo UX8407AA
- hp-wmi:
- Add support for Victus 16-r0xxx (8BC2)
- intel/vsec_tpmi:
- Move debugfs register before creating devices
- Prevent fault during unbind
- lenovo-wmi-*:
- Fix memory leak in lwmi_dev_evaluate_int()
- Balance IDA id allocation and free
- Balance component bind and unbind
- Prevent sending uninitialized WMI arguments to the device
- Decouple lenovo-wmi-gamezone and lenovo-wmi-other to simplify
module dependency graph
- Limit adding attributes to supported devices
- samsung-galaxybook:
- Handle kbd backlight, mic mute and camera block hotkeys
* tag 'platform-drivers-x86-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8407AA
platform/x86: lenovo-wmi-other: Limit adding attributes to supported devices
platform/x86: lenovo-wmi-other: Add Attribute ID helper functions
platform/x86: lenovo-wmi-helpers: Move gamezone enums to wmi-helpers
platform/x86: lenovo: Decouple lenovo-wmi-gamezone and lenovo-wmi-other
platform/x86: lenovo-wmi-other: Fix tunable_attr_01 struct members
platform/x86: lenovo-wmi-other: Zero initialize WMI arguments
platform/x86: lenovo-wmi-other: Balance component bind and unbind
platform/x86: lenovo-wmi-other: Balance IDA id allocation and free
platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()
platform/x86: hp-wmi: Add support for Victus 16-r0xxx (8BC2)
platform/x86/intel/tpmi/plr: Prevent fault during unbind
platform/x86: intel: Add notifiers support
platform/x86: intel: Move debugfs register before creating devices
platform/x86: samsung-galaxybook: Handle ACPI hotkey notifications
platform/x86: samsung-galaxybook: Refactor camera lens cover input device
PCI: brcmstb: Assign pcie->gen from of_pci_get_max_link_speed()
After commit 03f920936977 ("PCI: controller: Validate max-link-speed"),
pcie->gen stopped being assigned and as a result the established PCIe link
would stop supporting Gen3 speeds on 2712 since pcie->gen is used to
populate LnkCntl2 and LnkCap in brcm_pcie_set_gen().
If the 'max-link-speed' property is not specified, or it exceeds Gen3,
resort to the HW defaults.
Linus Torvalds [Fri, 15 May 2026 17:38:37 +0000 (10:38 -0700)]
Merge tag 'v7.1-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix potential dead-lock in rhashtable when used by xattr
- Avoid calling kvfree on atomic path in rhashtable
* tag 'v7.1-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
rhashtable: Add bucket_table_free_atomic() helper
mm/slab: Add kvfree_atomic() helper
rhashtable: drop ht->mutex in rhashtable_free_and_destroy()
Jens Axboe [Fri, 15 May 2026 16:19:09 +0000 (10:19 -0600)]
io_uring/net: punt IORING_OP_BIND async if it needs file create
For two reasons:
1) An opcode cannot block inside io_uring_enter() doing submissions, as
it'll stall the submission side pipeline.
2) Ending up in sb_start_write() -> __sb_start_write() ->
percpu_down_read_freezable() introduces a new lockdep edge, which it
correctly complains about.
Check if the socket type is AF_UNIX and has a non-empty pathname. If it
does, mark it REQ_F_FORCE_ASYNC to punt the submission to io-wq rather
than attempt to do it inline.
With PROVE_LOCKING on an Snapdragon X1 and VM reclaim pressure, we see:
======================================================
WARNING: possible circular locking dependency detected
7.0.0-debug+ #43 Tainted: G W
------------------------------------------------------
kswapd0/82 is trying to acquire lock: ffff800080ec3870 (reservation_ww_class_acquire){+.+.}-{0:0}, at: msm_gem_shrinker_scan+0x17c/0x400 [msm]
but task is already holding lock: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
other info that might help us debug this:
Chain exists of:
reservation_ww_class_acquire --> reservation_ww_class_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(reservation_ww_class_mutex);
lock(fs_reclaim);
lock(reservation_ww_class_acquire);
*** DEADLOCK ***
1 lock held by kswapd0/82:
#0: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
Hans Zhang [Fri, 15 May 2026 15:36:35 +0000 (23:36 +0800)]
MAINTAINERS: Remove Jianjun Wang as PCIe mediatek maintainer
Email to Jianjun Wang <jianjun.wang@mediatek.com> bounces with error:
"550 Relaying mail to jianjun.wang@mediatek.com is not allowed".
Remove the address to avoid sending future kernel maintenance queries
to an unreachable destination.
The MediaTek PCIe driver remains supported by Ryder Lee.
UTS_RELEASE evaluates to a static string and changes quite easily (e.g.
uncommitted changes in the source tree or new commits). So when checking
if a patch introduces changes to the resulting binary each usage of
UTS_RELEASE is source of annoyance.
Instead of using UTS_RELEASE directly use init_utsname()->release which
evaluates to the same string but with that a change of UTS_RELEASE
doesn't affect msm_disp_snapshot_util.o or msm_gpu.o.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Patchwork: https://patchwork.freedesktop.org/patch/721948/
Message-ID: <20260428144553.1103785-2-u.kleine-koenig@baylibre.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Hongling Zeng [Wed, 13 May 2026 10:34:06 +0000 (18:34 +0800)]
cachefiles: Fix error return when vfs_mkdir() fails
When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails.
Merge tag 'iio-fixes-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
iio-fixes-for-7.a IIO: 1st set of fixes for the 7.1 cycle
Usual mixed bag of ancient issues and more recent.
Lots of new contributors this cycle and some of that work has
uncovered bugs in the code they were looking at.
core,buffer
- Add missing dma_fence_put()
- hw-consumer - Fix a use after free in cleaning up a list.
core,inkern
- Fix return value handling in iio_read_channel_processed_scale() that
meant a correct result was treated as an error.
adi,ad3530r
- Fix powerdown mode strings for AD3531 and AD3531R.
adi,ad4695
- Fix ordering so by the time device transitions to offload mode
all setup transfers are done. This avoids issues with offload
controllers that cannot handle normal transfers after offload has
begun.
adi,ad5686
- Fix wrong initialization of reference bit for single channel parts.
- Fix off by one in check on input raw value
adi,adis16260
- Fix division by zero triggerable from sysfs.
adi,adis16550
- Fix a stack leak to userspace.
amlogic,meson-adc
- Fix a buffer allocation leak in an error path.
bosch,bmp280
- Fix a stack leak to userspace.
capella,cm3323
- Fix wrong return value rather than register value being written
data->reg_conf on write.
maxim,max5821
- Check correct length i2c_master_send() in max5821_sync_powerdown_mode().
mediatek,mt6359
- Fix potential uninitialized value.
nuvoton,npcm_adc
- Fix unbalance clk_disable_unprepare()
nxp,sar-adc
- Avoid a division by zero if the common clock framework is disabled.
- Fix a division by zero triggerable from sysfs.
- Ensure all of struct dma_slave_config is initialized.
qcom,spmi-adc-gen3
- Fix an off by one that leads to an out of bounds array read.
samsung,ssp_sensors
- Ensure work is cancelled during remove to avoid use after free.
sensiron,scd30
- Fix a division by zero triggerable from sysfs.
st,lsm6dsx
- Fix a stack leak to userspace.
st,magn
- Fix default value for data ready pin selection for devices that
have no data ready pin selection.
vishay,veml6070
- Close a resource leak in an error path.
winsen,mhz19b
- Reject over-sized serial messages from device.
xilinx,xadc
- Fix sequencer handling for dual MUX cases
* tag 'iio-fixes-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: adc: viperboard: Fix error handling in vprbrd_iio_read_raw
iio: gyro: itg3200: fix i2c read into the wrong stack location
iio: dac: ad5686: fix powerdown control on dual-channel devices
iio: dac: ad5686: acquire lock when doing powerdown control
iio: temperature: tsys01: fix broken PROM checksum validation
iio: dac: ad3530r: Fix AD3531/AD3531R powerdown mode strings
iio: buffer: hw-consumer: fix use-after-free in error path
iio: dac: ad5686: fix input raw value check
iio: dac: ad5686: fix ref bit initialization for single-channel parts
iio: ssp_sensors: cancel delayed work_refresh on remove
iio: adc: meson-saradc: fix calibration buffer leak on error
iio: dac: max5821: fix return value check in powerdown sync
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
iio: adc: qcom-spmi-adc5-gen3: Fix off by one in adc5_gen3_get_fw_channel_data()
iio: imu: adis16550: fix stack leak in trigger handler
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
iio: adc: nxp-sar-adc: zero-initialize dma_slave_config
iio: light: cm3323: fix reg_conf not being initialized correctly
iio: magnetometer: st_magn: fix default DRDY pin selection for LIS2MDL
...
David Carlier [Tue, 5 May 2026 13:37:48 +0000 (14:37 +0100)]
iio: gyro: itg3200: fix i2c read into the wrong stack location
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer.
Fixes: 9dbf091da080 ("iio: gyro: Add itg3200") Cc: stable@vger.kernel.org Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Rodrigo Alencar [Tue, 5 May 2026 12:35:05 +0000 (13:35 +0100)]
iio: dac: ad5686: fix powerdown control on dual-channel devices
Fix powerdown control by using a proper bit shift for the powerdown mask
values. During initialization, powerdown bits are initialized so that
unused bits are set to 1 and the correct bit shift is used. Dual-channel
devices use one-hot encoding in the address and that reflects on the
position of the powerdown bits, which are not channel-index based
for that case. Quad-channel devices also use one-hot encoding for the
channel address but the result of log2(address) coincides with the channel
index value. Mask as 0x3U is used rather than 0x3, because shift can reach
value of 30 (last channel of a 16-channel device), which would mess with
the sign bit. The issue was introduced when first adding support for
dual-channel devices, which overlooked powerdown control differences.
Fixes: 7dc8faeab3e3 ("iio: dac: ad5686: add support for AD5338R") Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Rodrigo Alencar [Tue, 5 May 2026 12:35:04 +0000 (13:35 +0100)]
iio: dac: ad5686: acquire lock when doing powerdown control
Protect access of pwr_down_mode and pwr_down_mask fields with existing
mutex lock. Each channel exposes their own attributes for controlling
powerdown modes and powerdown state. This fixes potential race conditions
as those the write functions perform non-atomic read-modify-write
operations to those pwr_down_* fields. This issue exists since the ad5686
driver was first introduced.
Fixes: c2f37c8dcadc ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters") Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The current implementation of tsys01_crc_valid() incorrectly sums the
first word (n_prom[0]) repeatedly instead of iterating over the 8 words
retrieved from the PROM. This leads to a checksum mismatch and probe
failure on hardware.
According to the TSYS01 datasheet, the PROM consists of 8 words. A valid
check must iterate through all 8 words to verify the integrity of the
calibration data. The current driver only checks the first word 8 times.
Note: This fix was identified during a code audit and is based on
datasheet specifications. It has not been tested on real hardware.
Fixes: 43e53407f680 ("Add tsys01 meas-spec driver support") Signed-off-by: Salah Triki <salah.triki@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD3531/AD3531R has different output operating modes from the
AD3530/AD3530R. According to the AD3531/AD3531R datasheet, the
powerdown modes are:
01: 500 Ohm output impedance
10: 3.85 kOhm output impedance
11: 16 kOhm output impedance
The driver currently uses the AD3530R modes (1k, 7.7k, 32k) for all
variants, which is incorrect for AD3531/AD3531R.
Add AD3531R-specific powerdown mode strings and assign them to the
AD3531/AD3531R chip variants.
Fixes: 93583174a3df ("iio: dac: ad3530r: Add driver for AD3530R and AD3531R") Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Felix Gu [Thu, 30 Apr 2026 13:29:06 +0000 (21:29 +0800)]
iio: buffer: hw-consumer: fix use-after-free in error path
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe().
Fixes: 48b66f8f936f ("iio: Add hardware consumer buffer support") Reported-by: sashiko <sashiko-bot@kernel.org> Closes: https://sashiko.dev/#/patchset/20260427-iio_buf-v1-1-2bbdac844647%40gmail.com Signed-off-by: Felix Gu <ustc.gu@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Maxwell Doose <m32285159@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Rodrigo Alencar [Fri, 1 May 2026 09:14:55 +0000 (10:14 +0100)]
iio: dac: ad5686: fix input raw value check
Fix range check for input raw value, which is off by one, i.e., for a
10-bit DAC the max valid value is 1023, but 1 << 10 equals 1024, which
passes the previous check, allowing an out-of-range write. The issue
exists since the ad5686 driver was first introduced.
Fixes: c2f37c8dcadc ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters") Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Rodrigo Alencar [Fri, 1 May 2026 09:14:54 +0000 (10:14 +0100)]
iio: dac: ad5686: fix ref bit initialization for single-channel parts
The reference bit position was ignored when writing the register at the
probe() function (!!val was used). When such bit is 1, internal voltage
reference is disabled so that an external one can be used. For
multi-channel devices, bit 0 of the Internal Reference Setup command
behaves the same way, so AD5686_REF_BIT_MSK is created. The issue exists
since support for single-channel devices were first introduced.
Fixes: be1b24d24541 ("iio:dac:ad5686: Add AD5691R/AD5692R/AD5693/AD5693R support") Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Felix Gu [Mon, 27 Apr 2026 11:26:31 +0000 (19:26 +0800)]
iio: adc: meson-saradc: fix calibration buffer leak on error
meson_sar_adc_temp_sensor_init() allocates a buffer with
nvmem_cell_read(), but the old code leaked it if
syscon_regmap_lookup_by_phandle() failed.
Fix this by adding missing kfree(buf).
Fixes: d6f2eac64403 ("iio: adc: meson: no devm for nvmem_cell_get") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Salah Triki [Mon, 27 Apr 2026 21:33:19 +0000 (22:33 +0100)]
iio: dac: max5821: fix return value check in powerdown sync
The function max5821_sync_powerdown_mode() returned the result of
i2c_master_send() directly. If a partial transfer occurred, it would
be incorrectly treated as a success by the caller.
While the caller currently handles the positive return value of 2 as
success, this patch refactors the function to return 0 on full success
and -EIO on short writes. This ensures robust error handling for
incomplete transfers and improves code maintainability by using
sizeof(outbuf).
Fixes: 472988972737 ("iio: add support of the max5821") Signed-off-by: Salah Triki <salah.triki@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Salah Triki [Mon, 27 Apr 2026 20:12:38 +0000 (21:12 +0100)]
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
In mt6358_read_imp(), the variable val_v is passed to regmap_read()
but the return value is not checked. If the read fails, val_v remains
uninitialized and its random stack content is subsequently reported
as a measurement result.
Initialize val_v to zero to ensure a predictable value is reported
in case of bus failure and to prevent potential stack data leakage.
This also satisfies static analyzers that might otherwise flag the
variable as used uninitialized.
Fixes: 3587914bf61d ("iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC") Signed-off-by: Salah Triki <salah.triki@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Dan Carpenter [Fri, 10 Apr 2026 10:12:13 +0000 (13:12 +0300)]
iio: adc: qcom-spmi-adc5-gen3: Fix off by one in adc5_gen3_get_fw_channel_data()
The > in "if (chan > ADC5_MAX_CHANNEL)" should be >= to prevent an out
of bound read of the adc->data->adc_chans[] array.
Fixes: baff45179e90 ("iio: adc: Add support for QCOM PMIC5 Gen3 ADC") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: imu: adis16550: fix stack leak in trigger handler
adis16550_trigger_handler() declares the scan data array on the stack
without initializing it. The memcpy() at the bottom fills only the
first 28 bytes (TEMP + 6 channels of GYRO/ACCEL data), and
iio_push_to_buffers_with_timestamp() writes the s64 timestamp at the
8-byte-aligned offset 32. Bytes 28-31 remain uninitialized stack data
which leaks to userspace on ever trigger.
Fix this all by just zero-initializing the structure on the stack.
Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: David Lechner <dlechner@baylibre.com> Cc: "Nuno Sá" <nuno.sa@analog.com> Cc: Andy Shevchenko <andy@kernel.org> Fixes: e4570f4bb231 ("iio: imu: adis16550: align buffers for timestamp") Cc: stable <stable@kernel.org> Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack.
Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: David Lechner <dlechner@baylibre.com> Cc: "Nuno Sá" <nuno.sa@analog.com> Cc: Andy Shevchenko <andy@kernel.org> Fixes: c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") Cc: stable <stable@kernel.org> Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack.
Cc: Jonathan Cameron <jic23@kernel.org> Cc: David Lechner <dlechner@baylibre.com> Cc: "Nuno Sá" <nuno.sa@analog.com> Cc: Andy Shevchenko <andy@kernel.org> Fixes: 872c8014e05e ("iio: pressure: bmp280: drop sensor_data array") Cc: stable <stable@kernel.org> Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
nxp_sar_adc_start_cyclic_dma() only fills the RX-side members of
dma_slave_config before passing it to dmaengine_slave_config().
Zero-initialize the structure so unused members do not contain stack
garbage. Some DMA engines consult optional dma_slave_config fields, so
leaving them uninitialized can cause DMA setup failures.
Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms") Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: light: cm3323: fix reg_conf not being initialized correctly
The code stores the return value of i2c_smbus_write_word_data()
in data->reg_conf; however, this value represents the result
of the write operation and not the value actually written to
the configuration register. This meant that the contents of
data->reg_conf did not truly reflect the contents
of the hardware register.
Instead, save the value of the register before the write
and use this value in the I2C write.
The bug was found by code inspection: i2c_smbus_write_word_data()
returns 0 on success, not the value written to the register.
Tested using i2c-stub on a Raspberry Pi 3B running a custom 6.19.10
kernel. Before loading the driver, the configuration register 0x00
CM3323_CMD_CONF was populated with 0x0030 using
`i2cset -y 11 0x10 0x00 0x0030 w`, encoding an integration time of 320ms
in bits[6:4].
Due to incorrect initialization of data->reg_conf in
cm3323_init(), the print of integration_time returns 0.040000
instead of the expected 0.320000. This happens because the read of the
integration_time depends on cm3323_get_it_bits() that is based on the
value of data->reg_conf, which is erroneously set to 0.
With this fix applied, data->reg_conf correctly saves 0x0030 after init
and the successive integration_time reports 0.320000 as expected.
Fixes: 8b0544263761 ("iio: light: Add support for Capella CM3323 color sensor") Cc: stable@vger.kernel.org Signed-off-by: Aldo Conte <aldocontelk@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: magnetometer: st_magn: fix default DRDY pin selection for LIS2MDL
The device tree binding for st,lis2mdl does not support
st,drdy-int-pin property. However, when no platform data is provided
and the property is absent, the driver falls back to default_magn_pdata
which hardcodes drdy_int_pin = 2. This causes
`st_sensors_set_drdy_int_pin` to fail with -EINVAL because the LIS2MDL
sensor settings have no INT2 DRDY mask defined.
Fix this by checking the sensor's INT2 DRDY mask availability at
probe time and selecting the appropriate default pin. Sensors that
do not support INT2 DRDY will default to INT1, while all others
retain the existing default of INT2.
Fixes: 38934daf7b5c ("iio: magnetometer: st_magn: Provide default platform data") Signed-off-by: Advait Dhamorikar <advaitd@mechasystems.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Benoît Monin [Wed, 1 Apr 2026 15:24:58 +0000 (17:24 +0200)]
iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf()
iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes,
kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial
kref to 1. It then calls dma_resv_add_fence() which takes a second
reference (kref=2), and stores a raw pointer in block->fence.
On the success path the function returns without calling dma_fence_put()
to release the initial reference, so every buffer enqueue permanently
leaks one kmalloc-128 allocation.
The iio_buffer_cleanup() work item only releases the temporary reference
taken during completion signalling by iio_buffer_signal_dmabuf_done();
the initial reference from dma_fence_init() is never released.
With four iio_rwdev instances at 240kHz and 512 samples per buffer,
this produces ~1875 kmalloc-128 allocations per second matching the
observed slab growth exactly. A test with ftrace confirmed that the
dma_fence_destroy event was never triggered.
Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring
ownership of the fence to the DMA reservation object. The DMA fence then
gets properly discarded after being signalled.
Fixes: 3e26d9f08fbe0 ("iio: core: Add new DMABUF interface infrastructure") Originally-by: James Nuss <jamesnuss@nanometrics.ca> Signed-off-by: Benoît Monin <benoit.monin@bootlin.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: adc: nxp-sar-adc: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero or a negative value to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
Also prevent unsigned integer underflow when the computed cycle count is
smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to
a huge value.
Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt DeVillier [Thu, 7 May 2026 14:58:41 +0000 (09:58 -0500)]
ALSA: hda/ca0132: Disable auto-detect on manual output select
Commit 778031e1658d ("ALSA: hda/ca0132: Set HP/Speaker
auto-detect default from headphone pin verb") enables HP/Speaker
auto-detect by default when the headphone pin supports presence detect.
With auto-detect enabled, ca0132_select_out() and ca0132_alt_select_out()
choose the output from jack presence instead of the manual HP/Speaker
selection. This means selecting speaker output while headphones are
plugged in updates the control state, but audio still routes to the
headphones.
Treat an explicit manual output selection as a request to leave
auto-detect mode. Clear the HP/Speaker auto-detect switch before applying
the manual selection, and notify userspace so the auto-detect control
state is updated in mixers. Do this for both the normal HP/Speaker
Playback Switch and the alternate Output Select control used by desktop
cards.
This keeps auto-detect enabled by default for devices with jack presence
detection, while preserving the expected behavior that a manual output
choice takes effect immediately.
Sven Eckelmann [Wed, 13 May 2026 08:43:54 +0000 (10:43 +0200)]
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone
Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Wed, 13 May 2026 07:01:36 +0000 (09:01 +0200)]
batman-adv: frag: disallow unicast fragment in fragment
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process.
Cc: stable@kernel.org Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Reviewed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org>
Merge tag 'counter-fixes-for-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
Counter fixes for 7.1
A fix to plug a refcount leak in counter_alloc() if dev_set_name() fails
and the error path is taken.
* tag 'counter-fixes-for-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: Fix refcount leak in counter_alloc() error path
Adrien Burnett [Thu, 14 May 2026 16:59:05 +0000 (18:59 +0200)]
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion Laptop 16-ag0xxx
Add a SND_PCI_QUIRK entry for the HP Pavilion Laptop 16-ag0xxx
(subsystem 0x103c:0x8cbc, Realtek ALC245). The
ALC245_FIXUP_HP_X360_MUTE_LEDS fixup is already used by the
neighbouring HP Pavilion Aero Laptop 13-bg0xxx (0x103c:0x8cbd);
it chains the master-mute COEF handler with the GPIO mic-mute
LED handler, which is what this machine needs.
Tested on the affected hardware: both the mute and mic-mute key
LEDs respond correctly to the keyboard hotkeys after this change.
Jackie Dong [Thu, 14 May 2026 15:39:40 +0000 (23:39 +0800)]
ALSA: hda/realtek: ALC269 fixup for Lenovo Yoga Pro 7 15ASH111 audio
Volume control for the speakers on the Lenovo Yoga Pro 7 15ASH11 laptop
doesn't work.
The DAC routing is the same as on the ThinkPad X1 Gen7 function, so reuse
the alc285_fixup_thinkpad_x1_gen7 to get it working.
Quan Sun [Thu, 14 May 2026 13:22:45 +0000 (21:22 +0800)]
ALSA: hda: Fix NULL pointer dereference in snd_hda_ctl_add()
snd_hda_ctl_add() dereferences kctl->id.subdevice without checking
whether kctl is NULL. Multiple callers in sound/hda/codecs/ca0132.c
pass the return value of snd_ctl_new1() directly to snd_hda_ctl_add()
without a NULL check:
snd_ctl_new1() returns NULL when the underlying snd_ctl_new() fails
on memory allocation (kzalloc_flex),which can occur under memory
pressure or via fault injection.
Add a NULL check at the entry of snd_hda_ctl_add(), matching the
pattern already used by snd_ctl_add_replace() at the same call
path (sound/core/control.c:515). Return -EINVAL to let callers
handle the error gracefully.
Markus Kramer [Wed, 13 May 2026 22:28:18 +0000 (00:28 +0200)]
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book5 360 headphone
The Samsung Galaxy Book5 360 (NP750QHA, PCI subsystem ID 0x144d:0xc902)
has severe audio distortion on the 3.5mm headphone jack. Applying
ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET corrects the output path
configuration, consistent with fixes already applied to other Samsung
Galaxy Book models using the same ALC256 codec.
Andy Shevchenko [Wed, 13 May 2026 16:27:58 +0000 (18:27 +0200)]
ALSA: hda/cs35l56: Drop malformed default N from Kconfig
First of all, it has to be 'default n' (small letter n), otherwise
it looks for CONFIG_N which is absent and in case of appearance
will enable something unrelated. Second and most important is that
'n' *is* the default 'default' already. Hence just drop malformed
line.
Daniel Schaefer [Wed, 13 May 2026 15:55:13 +0000 (23:55 +0800)]
ALSA: hda/realtek: fix mic boost on Framework PTL
In addition to the mic jack fix, also need to avoid boosting the
internal mic too much, otherwise >50% input volume clips a lot.
Also add a second SSID. We have one for the classic chassis/speaker and
one for the new Pro chassis/speaker.
To: Jaroslav Kysela <perex@perex.cz>
To: Takashi Iwai <tiwai@suse.com>
To: linux-sound@vger.kernel.org Cc: Dustin L. Howett <dustin@howett.net> Cc: linux@frame.work Signed-off-by: Daniel Schaefer <dhs@frame.work> Link: https://patch.msgid.link/20260513155513.11683-1-dhs@frame.work Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Limit mic boost on Positivo DN50E
The internal mic boost on the Positivo DN50E is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
uaudio_transfer_buffer_setup() calls dma_get_sgtable() and then passes
the sg_table to uaudio_iommu_map_xfer_buf() without checking whether sg
table construction succeeded. If dma_get_sgtable() fails, the sg_table
contents are not valid.
uaudio_iommu_map_pa() also ignores iommu_map() failures for the event and
transfer rings and still returns the allocated IOVA to the QMI response.
That can expose an unmapped IOVA to the audio DSP. For transfer rings,
the failed mapping also leaves the IOVA allocator state marked in use.
Check both operations. Free the coherent transfer buffer when sg table
construction fails, free the sg table when transfer-buffer IOMMU mapping
fails, and release the transfer-ring IOVA if iommu_map() fails. Also
return the existing event-ring IOVA when the event ring is already mapped,
matching the pre-split helper behavior.
Myeonghun Pak [Wed, 13 May 2026 06:57:00 +0000 (15:57 +0900)]
drm/loongson: Use managed KMS polling
lsdc_pci_probe() initializes KMS polling before setting up vblank support,
requesting the IRQ and registering the DRM device. If any of those later
steps fails, probe returns without finalizing polling. The driver also
never finalizes polling on regular removal.
Use drmm_kms_helper_poll_init() so polling is tied to the DRM device
lifetime and automatically finalized on probe failure and device removal.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: f39db26c5428 ("drm: Add kms driver for loongson display controller") Cc: stable@vger.kernel.org Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260513065706.23803-1-mhun512@gmail.com
The Lenovo Legion 7 16ITHG6 uses codec SSID 17aa:3855, but its PCI
SSID is 17aa:3811. The latter is now also used by the Legion S7 15IMH05
quirk, which is matched before codec SSID fallback and incorrectly
routes Legion 7 16ITHG6 machines to ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS.
That fixup does not bind the CLSA0101 CS35L41 companion amplifiers,
making the built-in speakers silent even though playback appears to be
active.
Add a codec SSID quirk for 17aa:3855 before the conflicting PCI SSID
quirk so that the Legion 7 16ITHG6 uses ALC287_FIXUP_LEGION_16ITHG6.
This restores CS35L41 firmware loading and binds both speaker
amplifiers.
Fixes: 67f4c61a73e9 ("ALSA: hda/realtek: Add quirk for Legion S7 15IMH") Cc: stable@vger.kernel.org Tested-by: Nicholas Bonello <hadobedo@gmail.com> Assisted-by: Codex:GPT-5 Signed-off-by: Nicholas Bonello <hadobedo@gmail.com> Link: https://patch.msgid.link/20260508225507.47667-1-hadobedo@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lianqin Hu [Fri, 8 May 2026 12:49:34 +0000 (12:49 +0000)]
ALSA: usb-audio: Add iface reset and delay quirk for TTGK Technology USB-C Audio
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=3302, idProduct=17c2
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB-C Audio
usb 1-1: Manufacturer: TTGK Technology
usb 1-1: SerialNumber: 170120210706
ALSA: scarlett2: Add missing error check when initialise Autogain Status
When initialise new control with scarlett2_add_new_ctl() function for
Autogain Status, scarlett2_add_new_ctl() might throw an error. So, add
error check after initialise new control for Autogain Status.
This is reported by Coverity Scan with CID 1598781 as UNUSED_VALUE.
Jason Gunthorpe [Tue, 12 May 2026 16:46:17 +0000 (13:46 -0300)]
iommupt: Fix the end_index calculation in __map_range_leaf()
Sashiko noticed a mismatch of units in this math: num_leaves is
actually the number of leaf *entries* (so a 16-item contiguous leaf
is one num_leaves), while index is in items. The mismatch in maths
causes __map_range_leaf() to exit early instead of efficiently
filling a larger range of contiguous PTEs.
The early exit is caught by the functions above and then
__map_range_leaf() is re-invoked, so there is no functional issue.
Correct the misuse of units by adjusting num_leaves with the leaf
size and avoid the performance cost of looping externally.
There are also some mismatched types for num_leaves; simplify
things to remove the duplicated calculations.
Jason Gunthorpe [Tue, 12 May 2026 16:46:16 +0000 (13:46 -0300)]
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
Sashiko pointed out that the driver could drop PAGE_SIZE from the
pgsize_bitmap. That is technically allowed but nothing does it, and
such an iommu_domain would not be used with the DMA API today.
Still, it is against the design and it is trivial to fix up. Lift
the PT_WARN_ON to the if branch and just skip the fast path.
Jason Gunthorpe [Tue, 12 May 2026 16:46:15 +0000 (13:46 -0300)]
iommu: Handle unmap error when iommu_debug is enabled
Sashiko noticed a latent bug where the map error flow called iommu_unmap()
which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however
since this is an error path the map flow never actually established the
original iommu_debug_map() it will malfunction.
Lift the unmap error handling into iommu_map_nosync() and reorder it so
the trace_map()/iommu_debug_map() records the partial mapping and then
immediately unmaps it. This avoid creating the unbalanced tracking and
provides saner tracing instead of a unmap unmatched to any map.
Jason Gunthorpe [Tue, 12 May 2026 16:46:14 +0000 (13:46 -0300)]
iommu: Fix up map/unmap debugging for iommupt domains
Sashiko noticed a few issues in this path, and a few more were
found on review. Tidy them up further. These are intertwined
because the debug code depends on some of the WARN_ONs to function
right:
Lift into iommu_map_nosync():
- The might_sleep_if()
- 0 pgsize_bitmap WARN_ON
- Promote the illegal domain->type to a WARN_ON
- WARN_ON for illegal gfp flags
Then remove the return 0 since it is now safe to call
iommu_debug_map().
Lift into __iommu_unmap():
- 0 pgsize_bitmap WARN_ON
- Promote the illegal domain->type to a WARN_ON
- iommu_debug_unmap_begin()
This now pairs with the unconditional iommu_debug_map() on the
mapping side. Thus iommu debugging now works for iommupt along
with some of the other debugging features.
Jason Gunthorpe [Tue, 12 May 2026 16:46:13 +0000 (13:46 -0300)]
iommu: Fix loss of errno on map failure for classic ops
A typo, likely from a rebase, inverted the condition and caused
errors to be lost. Fix it to be "if (ret)".
This was breaking iommu_create_device_direct_mappings() on drivers
that don't use iommupt and don't fully set up their domain in
alloc_pages() (i.e., SMMUv2). In this case the first call of
iommu_create_device_direct_mappings() should fail due to the
incompletely initialized domain. Since it wrongly returns success,
the second call to iommu_create_device_direct_mappings() doesn't
happen and IOMMU_RESV_DIRECT is never set up.
Guixin Liu [Fri, 24 Apr 2026 01:39:23 +0000 (09:39 +0800)]
scsi: target: tcm_loop: Fix NULL ptr dereference
The TCM_LOOP LUN creation process calls device_register() to create the
device, which in turn invokes tcm_loop_driver_probe() registered with
the TCM_LOOP bus to create and register the scsi_host. However, if the
scsi_host memory allocation fails or scsi_add_host() fails, the
device_register() process still returns success. Subsequently, when the
user binds the LUN to a specific backend device, it accesses the NULL or
freed scsi_host.
scsi: isci: Fix use-after-free in device removal path
The ISCI completion tasklet is initialized in isci_host_alloc()
(drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy
interrupt handlers (drivers/scsi/isci/host.c:223,613).
isci_host_deinit() stops the controller and waits for stop completion,
but it never kills completion_tasklet before teardown continues. A
top-of-function tasklet_kill() is not sufficient here: interrupts are
only disabled when isci_host_stop_complete() runs, so until
wait_for_stop() returns the IRQ handlers can still requeue the
tasklet. The tasklet callback also re-enables interrupts after draining
completions, so killing the tasklet before the source is quiesced leaves
the same race open.
Once wait_for_stop() returns, no further IRQ-driven scheduling can
occur. Kill completion_tasklet there so teardown cannot race a queued
tasklet running on a dead ihost. On remove or unload, the stale callback
can otherwise dereference ihost and touch ihost->smu_registers after the
host lifetime ends.
A UML + KASAN analogue reproduced the failure class both with no
tasklet_kill() and with tasklet_kill() placed before source quiesce, and
stayed clean once the kill happened after quiescing the scheduling
source.
This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free in
device removal path"), but ISCI needs the kill after wait_for_stop().
Fixes: 6f231dda6808 ("isci: Intel(R) C600 Series Chipset Storage Control Unit Driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Link: https://patch.msgid.link/20260419210420.2134639-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Mon, 11 May 2026 17:53:17 +0000 (12:53 -0500)]
scsi: sd: Fix return code handling in sd_spinup_disk()
As found by smatch-ci, scsi_execute_cmd() can return negative or positve
values so we should use a int instead of unsigned int.
Fixes: b4d0c33a32c3 ("scsi: sd: Fix sshdr use in sd_spinup_disk") Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/linux-scsi/agFbI7E6JQwd3wGW@stanley.mountain/T/#u Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://patch.msgid.link/20260511175317.114007-1-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simon Trimmer [Thu, 14 May 2026 15:18:54 +0000 (16:18 +0100)]
ASoC: cs35l56: Log SoundWire status updates only on changes
The SoundWire slave update_status() callback can be invoked when the
status has not changed. To prevent large amounts of log noise with debug
enabled, log them only when the status changes. This also helps with
understanding them, because they now log an actual change in state.
Ingyu Jang [Thu, 14 May 2026 18:52:15 +0000 (03:52 +0900)]
ASoC: ti: omap-dmic: Fix IS_ERR() vs NULL check bug in omap_dmic_select_fclk()
clk_get_parent() returns NULL when the clock has no parent (or when the
input clk is NULL); it never returns an ERR_PTR. The current IS_ERR(mux)
check therefore never triggers - a NULL return falls through silently
to clk_set_parent(NULL, parent_clk), which simply fails with -EINVAL.
Use a NULL check so the dedicated error path runs and the prior
clk_get() reference is released via clk_put().
ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues
entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB
per-queue RX and TX stats live in those entries: ifb_xmit() updates
txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates
txp->tx_stats, and ifb_stats64() aggregates both over
dev->num_tx_queues.
The ethtool stats callbacks instead size and walk the per-queue
stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With
an asymmetric device where the RX queue count exceeds the TX queue
count, for example:
ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb
ethtool -S ifb10
ifb_get_ethtool_stats() indexes past the tx_private allocation and
copies adjacent slab data through ETHTOOL_GSTATS.
Use dev->num_tx_queues consistently for the stats strings, the
stats count, and the stats data walks. This reports one RX stats
group and one TX stats group for each backing ifb_q_private entry,
which is the queue set IFB can actually populate.
Reproduced under UML+KASAN at v7.1-rc2:
BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae
Read of size 8 at addr 0000000062dbd228 by task ethtool/36
ifb_fill_stats_data+0x3c/0xae
ifb_get_ethtool_stats+0xc0/0x129
__dev_ethtool+0x1ca5/0x363c
dev_ethtool+0x123/0x1b3
dev_ioctl+0x56c/0x744
sock_do_ioctl+0x15f/0x1b2
sock_ioctl+0x4d5/0x50a
sys_ioctl+0xd8b/0xde9
With the patch applied, the same UML+KASAN repro is silent and
ethtool -S ifb10 reports only the stats backed by the single
allocated tx_private entry.
Or Har-Toov [Wed, 13 May 2026 06:36:40 +0000 (09:36 +0300)]
net/mlx5: Skip disabled vports when setting max TX speed
When setting vports max TX speed during LAG activation or bond state
changes, the code iterates over all eswitch vports. However, some
vports may not be enabled yet.
Skip vports that are not enabled to avoid sending FW commands for
uninitialized vports. Save the LAG aggregated speed in the vport
struct so it can be applied when the vport is enabled later.
Fixes: 50f1d188c580 ("net/mlx5: Propagate LAG effective max_tx_speed to vports") Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260513063640.334132-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeroen Massar [Wed, 13 May 2026 06:33:02 +0000 (09:33 +0300)]
net/mlx5: Do not restore destination-less TC rules
After IPsec policy/state TX rules are added, any TC flow rule, which
forwards packets to uplink, is modified to forward to IPsec TX tables.
As these tables are destroyed dynamically, whenever there is no
reference to them, the destinations of this kind of rules must be
restored to uplink, unless there is no destination for that rule.
The flow rules FLOW_ACTION_ACCEPT, DROP, TRAP, GOTO and SAMPLE do not
have a destination port, and thus out_count = 0.
At cleanup time of the rules in mlx5_esw_ipsec_modify_flow_dests
we call mlx5_eswitch_restore_ipsec_rule but as the above types
do not have a destination we get an underflow of out_count, as
the port is passed, which is esw_attr->out_count - 1.
This change avoids calling mlx5_eswitch_restore_ipsec_rule when
there are no output destinations and thus avoids the underflow.
Fixes: d1569537a837 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules") Signed-off-by: Jeroen Massar <jmassar@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260513063302.333761-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Wed, 13 May 2026 06:27:37 +0000 (09:27 +0300)]
net/mlx5e: Don't leak RSS context in case of error
If mlx5e_rx_res_rss_set_rxfh() fails during mlx5e_create_rxfh_context(),
the RSS context is not cleaned up.
This leaves a stale entry in 'res->rss[rss_idx]' that occupies a context
slot.
Destroy the RSS context before returning the error.
Fixes: 6c2509d44636 ("net/mlx5e: Add error flow for ethtool -X command") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260513062737.333259-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy Shevchenko [Wed, 13 May 2026 16:26:12 +0000 (18:26 +0200)]
ASoC: cs35l56: Drop malformed default N from Kconfig
First of all, it has to be 'default n' (small letter n), otherwise
it looks for CONFIG_N which is absent and in case of appearance
will enable something unrelated. Second and most important is that
'n' *is* the default 'default' already. Hence just drop malformed
line.
Chuck Lever [Wed, 13 May 2026 12:58:25 +0000 (08:58 -0400)]
tls: Preserve sk_err across recvmsg() when data has been copied
The sk_err check in tls_rx_rec_wait() consumes the error via
sock_error(), which clears sk_err atomically. When the caller
(tls_sw_recvmsg, tls_sw_splice_read, or tls_sw_read_sock) already
has bytes copied to userspace, it returns those bytes and discards
the error from this call. sk_err is now zero on the socket, so the
next read syscall observes only RCV_SHUTDOWN and reports a clean
EOF instead of the actual error (typically -ECONNRESET).
The race is reachable when tls_read_flush_backlog()'s periodic
sk_flush_backlog() triggers tcp_reset() in the middle of a
multi-record read.
Pass a has_copied flag to tls_rx_rec_wait(). When has_copied is
false, consume sk_err via sock_error() as before. When has_copied
is true, report the error from READ_ONCE() but leave sk_err set:
the caller returns the byte count and discards the err from this
call, and the next read syscall surfaces the preserved sk_err. This
mirrors the tcp_recvmsg() preserve-and-surface pattern.
The decrypt-abort path is unaffected: tls_err_abort() raises
sk_err to EBADMSG after tls_rx_rec_wait() returns, and nothing
on the caller's return path consumes it, so the EBADMSG surfaces
on the next read.
tls_sw_splice_read() passes has_copied=false: it processes
one record per call, so no bytes have been copied within the
function when tls_rx_rec_wait() runs. A reset that arrives
between iterations of splice_direct_to_actor() (the sendfile()
path) is still consumed by sock_error() in the later call, and the
outer loop returns the prior iterations' byte count and drops the
error. tcp_splice_read() exhibits the same pattern at the iteration
boundary; addressing it belongs at the splice_direct_to_actor()
layer and is out of scope here.
Fixes: c46b01839f7a ("tls: rx: periodically flush socket backlog") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20260513125825.205189-1-cel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dawei Feng [Wed, 13 May 2026 15:13:20 +0000 (23:13 +0800)]
octeontx2-pf: fix double free in rvu_rep_rsrc_init()
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware.
Jens Axboe [Fri, 15 May 2026 01:14:33 +0000 (19:14 -0600)]
Merge tag 'nvme-7.1-2026-05-14' of git://git.infradead.org/nvme into block-7.1
Pull NVMe fixes from Keith:
"- Fix memory leak on a passthrough integrity mapping failure (Keith)
- Hide secrets behind debug option (Hannes)
- Fix pci use-after-free for host memory buffer (Chia-Lin Kao)
- Fix tcp taregt use-after-free for data digest (Sagi)
- Revert a mistaken quirk (Alan Cui)
- Fix uevent and controller state race condition (Maurizio)
- Fix apple submission queue re-initialization (Nick Chan)"
* tag 'nvme-7.1-2026-05-14' of git://git.infradead.org/nvme:
nvme-apple: Reset q->sq_tail during queue init
nvme: fix race condition between connected uevent and STARTED_ONCE flag
Revert "nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808"
nvmet-tcp: Fix potential UAF when ddgst mismatch
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvmet-auth: Do not print DH-HMAC-CHAP secrets
nvme: fix bio leak on mapping failure
nvme: make prp passthrough usage less scary
William Bowling [Wed, 13 May 2026 04:16:35 +0000 (04:16 +0000)]
net: skbuff: preserve shared-frag marker during coalescing
skb_try_coalesce() can attach paged frags from @from to @to. If @from
has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same
externally-owned or page-cache-backed frags, but the shared-frag marker
is currently lost.
That breaks the invariant relied on by later in-place writers. In
particular, ESP input checks skb_has_shared_frag() before deciding
whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP
receive coalescing has moved shared frags into an unmarked skb, ESP can
see skb_has_shared_frag() as false and decrypt in place over page-cache
backed frags.
Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged
frags. The tailroom copy path does not need the marker because it copies
bytes into @to's linear data rather than transferring frag descriptors.
Fixes: cef401de7be8 ("net: fix possible wrong checksum generation") Fixes: f4c50a4034e6 ("xfrm: esp: avoid in-place decrypt on shared skb frags") Signed-off-by: William Bowling <vakzz@zellic.io> Reviewed-by: Eric Dumazet <edumazet@google.com> Tested-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://patch.msgid.link/20260513041635.1289541-1-vakzz@zellic.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matt Fleming [Wed, 13 May 2026 11:22:26 +0000 (12:22 +0100)]
net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover
mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after
mlx5e_safe_reopen_channels() has torn down and freed the channel (and
its embedded SQs). Replace the three sq->netdev references with
priv->netdev which is safe because priv outlives channel teardown.
The netdev_err() call already used priv->netdev for this reason; make
the trylock/unlock and health_channel_eq_recover calls consistent.
This fixes the following KASAN splat:
BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277
Maoyi Xie [Tue, 12 May 2026 14:28:07 +0000 (22:28 +0800)]
rds_tcp: close NULL deref window in rds_tcp_set_callbacks
rds_tcp_set_callbacks() links a new rds_tcp_connection onto
rds_tcp_tc_list under rds_tcp_tc_list_lock. It releases the
lock, then assigns tc->t_sock = sock outside the lock.
rds_tcp_tc_info() and rds6_tcp_tc_info() walk rds_tcp_tc_list
under the same lock. Both dereference tc->t_sock->sk without
a NULL check.
A reader can acquire rds_tcp_tc_list_lock between the writer's
spin_unlock and the t_sock store. It then sees a list entry
whose t_sock is NULL. The dereference of tc->t_sock->sk is a
NULL access.
Move tc->t_sock = sock inside rds_tcp_tc_list_lock, before
list_add_tail. A reader holding the lock then observes the
linkage and the t_sock store together.
The restore path is safe. rds_tcp_restore_callbacks() does
list_del_init inside the lock. The matching tc->t_sock = NULL
after unlink is harmless to readers holding the lock.
Fixes: 70041088e3b9 ("RDS: Add TCP transport to RDS") Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg> Reviewed-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260512142807.1855619-1-maoyi.xie@ntu.edu.sg Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ralf Lici [Wed, 13 May 2026 13:26:10 +0000 (15:26 +0200)]
ovpn: disable BHs when updating device stats
ovpn updates dev->dstats from both process and softirq contexts. In
particular, TCP paths may run from socket callbacks, workqueues or
strparser work, while UDP receive and ovpn's ndo_start_xmit path may
update the same per-device dstats from BH context.
Add ovpn device drop-stat helpers that disable BHs around
dev_dstats_rx_dropped() and dev_dstats_tx_dropped(), and use them for
drop accounting.
The successful RX dev_dstats_rx_add() update is already covered by the
BH-disabled section around gro_cells_receive(). For the successful TCP
TX dev_dstats_tx_add() update, replace the existing preempt-disabled
section with a BH-disabled one.
Namhyung Kim [Sun, 10 May 2026 20:23:46 +0000 (13:23 -0700)]
perf trace: Update beautifier script for clone flags
According to the change in the sched.h, update the script to generate
the flags array like below. Note that '+1' is needed to detect bitmask
pattern at index 0.
Namhyung Kim [Sun, 10 May 2026 20:23:45 +0000 (13:23 -0700)]
perf trace: Add beautifier script for fsmount flags
And move the existing one to fsmount_attr.sh to be more precise.
Now the fsmount_flags[] is generated from the mount.h like below.
The ilog2() + 1 is an existing pattern to handle bit flags.
projects / thirdparty / kernel / stable.git / log
