Pavel Begunkov [Mon, 23 Mar 2026 12:43:54 +0000 (12:43 +0000)]
io_uring/zcrx: implement device-less mode for zcrx
Allow creating a zcrx instance without attaching it to a net device.
All data will be copied through the fallback path. The user is also
expected to use ZCRX_CTRL_FLUSH_RQ to handle overflows as it normally
should even with a netdev, but it becomes even more relevant as there
will likely be no one to automatically pick up buffers.
Apart from that, it follows the zcrx uapi for the I/O path, and is
useful for testing, experimentation, and potentially for the copy
receive path in the future if improved.
Pavel Begunkov [Mon, 23 Mar 2026 12:43:52 +0000 (12:43 +0000)]
io_uring/zcrx: always dma map in advance
zcrx was originally establisihing dma mappings at a late stage when it
was being bound to a page pool. Dma-buf couldn't work this way, so it's
initialised during area creation.
It's messy having them do it at different spots, just move everything to
the area creation time.
Pavel Begunkov [Mon, 23 Mar 2026 12:43:51 +0000 (12:43 +0000)]
io_uring/zcrx: fully clean area on error in io_import_umem()
When accounting fails, io_import_umem() sets the page array, etc. and
returns an error expecting that the error handling code will take care
of the rest. To make the next patch simpler, only return a fully
initialised areas from the function.
Pavel Begunkov [Mon, 23 Mar 2026 12:43:50 +0000 (12:43 +0000)]
io_uring/zcrx: return back two step unregistration
There are reports where io_uring instance removal takes too long and an
ifq reallocation by another zcrx instance fails. Split zcrx destruction
into two steps similarly how it was before, first close the queue early
but maintain zcrx alive, and then when all inflight requests are
completed, drop the main zcrx reference. For extra protection, mark
terminated zcrx instances in xarray and warn if we double put them.
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
The RZ/V2H USB2 PHY requires control of the VBUS selection line
(VBENCTL) through a mux controller described in the device tree as
"mux-controller". This change adds support for registering the
rzv2h-usb-vbenctl auxiliary driver during probe.
This enables proper management of USB2.0 VBUS source selection on
platforms using the RZ/V2H SoC.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Replace raw MMIO accesses (readl/writel) with regmap_read() and
regmap_multi_reg_write() via devm_regmap_init_mmio().
Drop the manual spinlock as regmap provides internal locking.
Replace the custom rzv2h_usb2phy_regval struct with the standard
reg_sequence, and encode assert/deassert sequences as reg_sequence
arrays rather than individual scalar fields in the of_data
descriptor.
Use the reg_sequence .delay_us field to encode the 11 µs post-assert
delay, replacing the explicit usleep_range(11, 20) call in
rzv2h_usbphy_reset_assert().
Select REGMAP_MMIO in Kconfig.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Document USB2PHY reset controller bindings for RZ/G3E ("R9A09G047") SoC.
The RZ/G3E USB2PHY reset controller is functionally identical to the one
found on the RZ/V2H(P), so no driver changes are needed. The existing
"renesas,r9a09g057-usb2phy-reset" will be used as a fallback compatible
for this IP.
Add the '#mux-state-cells' property to support describing the USB VBUS_SEL
multiplexer as a mux-controller in the Renesas RZ/V2H(P) USB2PHY binding.
The mux-controller cannot be integrated into the parent USB2PHY node
because the VBUS source selector is part of a separate hardware block,
not the USB2PHY block itself.
This is required to properly configure USB PHY power selection on
RZ/V2H(P) and RZ/G3E SoCs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add bindings for the Awinic AW86938 haptic chip which can be found in
smartphones. These two chips require a similar devicetree configuration,
but have a register layout that's not 100% compatible.
Still, because chip model is fully detectable via ID register, these
chips can be documnented in the same file.
David Laight [Mon, 23 Mar 2026 11:22:47 +0000 (11:22 +0000)]
tools/nolibc/printf: Support negative variable width and precision
For (eg) "%*.*s" treat a negative field width as a request to left align
the output (the same as the '-' flag), and a negative precision to
request the default precision.
Set the default precision to -1 (not INT_MAX) and add explicit checks
to the string handling for negative values (makes the tet unsigned).
For numeric output check for 'precision >= 0' instead of testing
_NOLIBC_PF_FLAGS_CONTAIN(flags, '.').
This needs an inverted test, some extra goto and removes an indentation.
The changed conditionals fix printf("%0-#o", 0) - but '0' and '-' shouldn't
both be specified.
Will Deacon [Fri, 27 Mar 2026 19:27:57 +0000 (19:27 +0000)]
KVM: arm64: Destroy stage-2 page-table in kvm_arch_destroy_vm()
kvm_arch_destroy_vm() can be called on the kvm_create_vm() error path
after we have failed to register the MMU notifiers for the new VM. In
this case, we cannot rely on the MMU ->release() notifier to call
kvm_arch_flush_shadow_all() and so the stage-2 page-table allocated in
kvm_arch_init_vm() will be leaked.
Explicitly destroy the stage-2 page-table in kvm_arch_destroy_vm(), so
that we clean up after kvm_arch_destroy_vm() without relying on the MMU
notifiers.
Will Deacon [Fri, 27 Mar 2026 19:27:56 +0000 (19:27 +0000)]
KVM: arm64: Don't leave mmu->pgt dangling on kvm_init_stage2_mmu() error
If kvm_init_stage2_mmu() fails to allocate 'mmu->last_vcpu_ran', it
destroys the newly allocated stage-2 page-table before returning ENOMEM.
Unfortunately, it also leaves a dangling pointer in 'mmu->pgt' which
points at the freed 'kvm_pgtable' structure. This is likely to confuse
the kvm_vcpu_init_nested() failure path which can double-free the
structure if it finds it via kvm_free_stage2_pgd().
Ensure that the dangling 'mmu->pgt' pointer is cleared when returning an
error from kvm_init_stage2_mmu().
Sebastian Ene [Mon, 30 Mar 2026 10:54:41 +0000 (10:54 +0000)]
KVM: arm64: Prevent the host from using an smc with imm16 != 0
The ARM Service Calling Convention (SMCCC) specifies that the function
identifier and parameters should be passed in registers, leaving the
16-bit immediate field un-handled in pKVM when an SMC instruction is
trapped.
Since the HVC is a private interface between EL2 and the host,
enforce the host kernel running under pKVM to use an immediate value
of 0 only when using SMCs to make it clear for non-compliant software
talking to Trustzone that we only use SMCCC.
Dan Williams [Fri, 27 Mar 2026 05:28:21 +0000 (22:28 -0700)]
tools/testing/cxl: Test dax_hmem takeover of CXL regions
When platform firmware is committed to publishing EFI_CONVENTIONAL_MEMORY
in the memory map, but CXL fails to assemble the region, dax_hmem can
attempt to attach a dax device to the memory range.
Take advantage of the new ability to support multiple "hmem_platform"
devices, and to enable regression testing of several scenarios:
* CXL correctly assembles a region, check dax_hmem fails to attach dax
* CXL fails to assemble a region, check dax_hmem successfully attaches dax
* Check that loading the dax_cxl driver loads the dax_hmem driver
* Attempt to race cxl_mock_mem async probe vs dax_hmem probe flushing.
Check that both positive and negative cases.
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Link: https://patch.msgid.link/20260327052821.440749-10-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Dan Williams [Fri, 27 Mar 2026 05:28:20 +0000 (22:28 -0700)]
tools/testing/cxl: Simulate auto-assembly failure
Add a cxl_test module option to skip setting up one of the members of the
default auto-assembled region.
This simulates a device failing between firmware setup and OS boot, or
region configuration interrupted by an event like kexec.
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-9-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Dan Williams [Fri, 27 Mar 2026 05:28:19 +0000 (22:28 -0700)]
dax/hmem: Parent dax_hmem devices
For test purposes it is useful to be able to determine which
"hmem_platform" device is hosting a given sub-device.
Register hmem devices underneath "hmem_platform".
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-8-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Dan Williams [Fri, 27 Mar 2026 05:28:18 +0000 (22:28 -0700)]
dax/hmem: Fix singleton confusion between dax_hmem_work and hmem devices
dax_hmem (ab)uses a platform device to allow for a module to autoload in
the presence of "Soft Reserved" resources. The dax_hmem driver had no
dependencies on the "hmem_platform" device being a singleton until the
recent "dax_hmem vs dax_cxl" takeover solution.
Replace the layering violation of dax_hmem_work assuming that there will
never be more than one "hmem_platform" device associated with a global work
item with a dax_hmem local workqueue that can theoretically support any
number of hmem_platform devices.
Fixup the reference counting to only pin the device while it is live in the
queue.
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-7-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Dan Williams [Fri, 27 Mar 2026 05:28:17 +0000 (22:28 -0700)]
dax/hmem: Reduce visibility of dax_cxl coordination symbols
No other module or use case should be using dax_hmem_initial_probe or
dax_hmem_flush_work(). Limit their use to dax_hmem, and dax_cxl
respectively.
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-6-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The call to cxl_region_resource_contains() in hmem_register_cxl_device()
need not cast away 'const'. The problem is the usage of the
bus_for_each_dev() API which does not mark its @data parameter as 'const'.
Switch to bus_find_device() which does take 'const' @data, fixup
cxl_region_resource_contains() and its caller.
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-5-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Dan Williams [Fri, 27 Mar 2026 05:28:15 +0000 (22:28 -0700)]
cxl/region: Limit visibility of cxl_region_contains_resource()
The dax_hmem dependency on cxl_region_contains_resource() is a one-off
special case. It is not suitable for other use cases.
Move the definition to the other CONFIG_CXL_REGION guarded definitions in
drivers/cxl/cxl.h and include that by a relative path include. This matches
what drivers/dax/cxl.c does for its limited private usage of CXL core
symbols.
Reduce the symbol export visibility from global to just dax_hmem, to
further clarify its applicability.
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-4-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Dan Williams [Fri, 27 Mar 2026 05:28:14 +0000 (22:28 -0700)]
dax/cxl: Fix HMEM dependencies
The expectation is that DEV_DAX_HMEM=y should be disallowed if any of
CXL_ACPI, or CXL_PCI are set =m. Also DEV_DAX_CXL=y should be disallowed if
DEV_DAX_HMEM=m. Use "$config || !$config" syntax for each dependency.
Otherwise, the invalid DEV_DAX_HMEM=m && DEV_DAX_CXL=y configuration is
allowed.
Lastly, dax_hmem depends on the availability of the
cxl_region_contains_resource() symbol published by the cxl_core.ko module.
So, also prevent DEV_DAX_HMEM from being built-in when the cxl_core module
is not built-in.
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-3-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Dan Williams [Fri, 27 Mar 2026 05:28:13 +0000 (22:28 -0700)]
cxl/region: Fix use-after-free from auto assembly failure
The following crash signature results from region destruction while an
endpoint decoder is staged, but not fully attached.
[ dj: Moved bus_find_device( to next line. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20260327052821.440749-2-dan.j.williams@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
Historically DSI PHY bindings landed to the display/msm subdir, however
they describe PHYs and as such they should be in the phy/ subdir.
Follow the example of other Qualcomm display-related PHYs (HDMI, eDP)
and move bindings for the Qualcomm DSI PHYs to the correct subdir.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/709008/ Link: https://lore.kernel.org/r/20260305-msm-dsi-phy-v1-1-0a99ac665995@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The driver references CWB array from SM8650, but should use the Eliza
specific, which has different register space sizes. This should not
have noticeable impact on function but is indeed confusing, since the
Eliza table is used for .cwb_count.
Fixes: 0eb707bbc7fc ("drm/msm/dpu: Add support for Eliza SoC") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/715623/ Link: https://lore.kernel.org/r/20260331161156.211623-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Vladimir Oltean [Fri, 27 Mar 2026 18:46:53 +0000 (20:46 +0200)]
drm/msm/dp: remove debugging prints with internal struct phy state
These do not provide much value, and will become hard to maintain once
the Generic PHY framework starts hiding the contents of struct phy from
consumers.
Due to historical reasons we ended up with dummy values being specified
for MST-related interfaces some of them had INTF_NONE, others had
non-existing DP controller indices. Those workarounds are no longer
necessary. Fix types and indices for all DP-MST related INTF instances.
The only exception is INTF_3 on SC8180X, which has unique design. It can
be used either with INTF_0 / DP0 or with INTF_4 / DP1. This interface is
left with the dummy value until somebody implements necessary bits for
that platform.
Dmitry Baryshkov [Wed, 25 Mar 2026 03:06:06 +0000 (05:06 +0200)]
drm/msm/mdp5: drop workarounds specific to MDP5 1.0
With support for MSM8974v1 being removed from the driver, there is no
need to keep workarounds specific to that particular MDP5 revision. Drop
them, slightly simplifying the logic.
Dmitry Baryshkov [Wed, 25 Mar 2026 02:59:02 +0000 (04:59 +0200)]
drm/msm/mdp5: drop single flush support
Support for using a single CTL for flushing both interfaces was not in
use since the MDP5 driver dropped support for dual DSI configurations in
the commit df3c7899946c ("drm/msm/mdp5: drop split display support").
Having the MDP 3.x support migrated to the DPU driver the single CTL
flush is applicable to the platforms suspproted by the MDP5 driver. Drop
it alltogether.
Corey Hickey [Tue, 31 Mar 2026 21:49:06 +0000 (14:49 -0700)]
hwmon: (asus-ec-sensors) Fix T_Sensor for PRIME X670E-PRO WIFI
On the Asus PRIME X670E-PRO WIFI, the driver reports a constant value of
zero for T_Sensor. On this board, the register for T_Sensor is at a
different address, as found by experimentation and confirmed by
comparison to an independent temperature reading.
* sensor disconnected: -62.0°C
* ambient temperature: +22.0°C
* held between fingers: +30.0°C
Introduce SENSOR_TEMP_T_SENSOR_ALT1 to support the PRIME X670E-PRO WIFI
without causing a regression for other 600-series boards
Marc Zyngier [Wed, 1 Apr 2026 10:36:11 +0000 (11:36 +0100)]
KVM: arm64: set_id_regs: Allow GICv3 support to be set at runtime
set_id_regs creates a GIC3 guest when possible, and then proceeds
to write the ID registers as if they were not affected by the presence
of a GIC. As it turns out, ID_AA64PFR1_EL1 is the proof of the
contrary.
KVM now makes a point in exposing the GIC support to the guest,
no matter what userspace says (userspace such as QEMU is known to
write silly things at times).
Accommodate for this level of nonsense by teaching set_id_regs about
fields that are mutable, and only compare registers that have been
re-sanitised first.
Marc Zyngier [Wed, 1 Apr 2026 10:36:10 +0000 (11:36 +0100)]
KVM: arm64: Don't advertises GICv3 in ID_PFR1_EL1 if AArch32 isn't supported
Although the AArch32 ID regs are architecturally UNKNOWN when AArch32
isn't supported at any EL, KVM makes a point in making them RAZ.
Therefore, advertising GICv3 in ID_PFR1_EL1 must be gated on AArch32
being supported at least at EL0.
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com> Fixes: a258a383b9177 ("KVM: arm64: gic-v5: Sanitize ID_AA64PFR2_EL1.GCIE") Reported-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20260401103611.357092-16-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
Marc Zyngier [Wed, 1 Apr 2026 10:36:09 +0000 (11:36 +0100)]
KVM: arm64: Correctly plumb ID_AA64PFR2_EL1 into pkvm idreg handling
While we now compute ID_AA64PFR2_EL1 to a glorious 0, we never use
that data and instead return the 0 that corresponds to an allocated
idreg. Not a big deal, but we might as well be consistent.
Marc Zyngier [Wed, 1 Apr 2026 10:36:08 +0000 (11:36 +0100)]
KVM: arm64: Move GICv5 timer PPI validation into timer_irqs_are_valid()
Userspace can set the timer PPI numbers way before a GIC has been
created, leading to odd behaviours on GICv5 as we'd accept non
architectural PPI numbers.
Move the v5 check into timer_irqs_are_valid(), which aligns the
behaviour with the pre-v5 GICs, and is also guaranteed to run
only once a GIC has been configured.
Marc Zyngier [Wed, 1 Apr 2026 10:36:07 +0000 (11:36 +0100)]
KVM: arm64: Remove evaluation of timer state in kvm_cpu_has_pending_timer()
The vgic-v5 code added some evaluations of the timers in a helper funtion
(kvm_cpu_has_pending_timer()) that is called to determine whether
the vcpu can wake-up.
But looking at the timer there is wrong:
- we want to see timers that are signalling an interrupt to the
vcpu, and not just that have a pending interrupt
- we already have kvm_arch_vcpu_runnable() that evaluates the
state of interrupts
- kvm_cpu_has_pending_timer() really is about WFIT, as the timeout
does not generate an interrupt, and is therefore distinct from
the point above
As a consequence, revert these changes and teach vgic_v5_has_pending_ppi()
about checking for pending HW interrupts instead.
Marc Zyngier [Wed, 1 Apr 2026 10:36:06 +0000 (11:36 +0100)]
KVM: arm64: Kill arch_timer_context::direct field
The newly introduced arch_timer_context::direct field is a bit pointless,
as it is always set on timers that are... err... direct, while
we already have a way to get to that by doing a get_map() operation.
Additionally, this field is:
- only set when get_map() is called
- never cleared
and the single point where it is actually checked doesn't call get_map()
at all.
At this stage, it is probably better to just kill it, and rely on
get_map() to give us the correct information.
Marc Zyngier [Wed, 1 Apr 2026 10:36:05 +0000 (11:36 +0100)]
KVM: arm64: vgic-v5: Correctly set dist->ready once initialised
kvm_vgic_map_resources() targetting a v5 model results in vgic->dist_ready
never being set. This doesn't result in anything really bad, only
some more heavy locking as we go and re-init something for no good reason.
Rejig the code to correctly set the ready flag in all non-failing
cases.
Marc Zyngier [Wed, 1 Apr 2026 10:36:04 +0000 (11:36 +0100)]
KVM: arm64: vgic-v5: Make the effective priority mask a strict limit
The way the effective priority mask is compared to the priority of
an interrupt to decide whether to wake-up or not, is slightly odd,
and breaks at the limits.
This could result in spurious wake-ups that are undesirable.
Make the computed priority mask comparison a strict inequality, so
that interrupts that have the same priority as the mask are not
signalled.
Marc Zyngier [Wed, 1 Apr 2026 10:36:02 +0000 (11:36 +0100)]
KVM: arm64: vgic-v5: Transfer edge pending state to ICH_PPI_PENDRx_EL2
While it is perfectly correct to leave the pending state of a level
interrupt as is when queuing it (it is, after all, only driven by
the line), edge pending state must be transfered, as nothing will
lower it.
Marc Zyngier [Wed, 1 Apr 2026 10:36:01 +0000 (11:36 +0100)]
KVM: arm64: vgic-v5: Hold config_lock while finalizing GICv5 PPIs
Finalizing the PPI state is done without holding any lock, which
means that two vcpus can race against each other and have one zeroing
the state while another one is setting it, or even maybe using it.
Fixing this is done by:
- holding the config lock while performing the initialisation
- checking if SW_PPI has already been advertised, meaning that
we have already completed the initialisation once
Marc Zyngier [Wed, 1 Apr 2026 10:36:00 +0000 (11:36 +0100)]
KVM: arm64: Account for RESx bits in __compute_fgt()
When computing Fine Grained Traps, it is preferable to account for
the reserved bits. The HW will most probably ignore them, unless the
bits have been repurposed to do something else.
Use caution, and fold our view of the reserved bits in,
Marc Zyngier [Wed, 1 Apr 2026 10:35:56 +0000 (11:35 +0100)]
KVM: arm64: vgic: Don't reset cpuif/redist addresses at finalize time
Although we are OK with rewriting idregs at finalize time, resetting
the guest's cpuif (GICv3) or redistributor (GICv3) addresses once
we start running the guest is a pretty bad idea.
Move back this initialisation to vgic creation time.
Paul Sajna [Wed, 1 Apr 2026 03:15:11 +0000 (20:15 -0700)]
arm64: dts: qcom: sdm845-lg: Add uarts and Bluetooth
uart9 is debug serial on USB SBU1/2
UART RX is SBU1 and UART TX is SBU2 of the USB-C port).
1.8V Logic Level
Tested using pololu usb07a https://www.pololu.com/product/2585
and CH340 USB-UART
uart6 is bluetooth
Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40010214
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x02140201
Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
Bluetooth: hci0: QCA Downloading qca/judyln/crnv21.bin
Bluetooth: hci0: QCA setup on UART is completed
Add paths for Qualcomm firmware, including:
ipa, modem, venus, gpu
GPU and bluetooth are confirmed working, others may need more
testing/fixes
But regardless they will need the firmware paths specified here
and firmware added upstream before they will work, so might as well
get started on it now.
Abel Vesa [Mon, 30 Mar 2026 14:24:08 +0000 (17:24 +0300)]
arm64: dts: qcom: glymur-crd: Enable DisplayPort support
The two Type-C ports found on Glymur CRD are DisplayPort alternate mode
capable. Everything is in place already for the USB, but for DisplayPort
the controllers need to be enabled.
So enable the related DisplayPort controller for each of these two
ports. Also define the supported link frequencies for each output.
Jens Axboe [Tue, 31 Mar 2026 14:16:58 +0000 (08:16 -0600)]
io_uring/bpf_filters: retain COW'ed settings on parse failures
If io_parse_restrictions() fails, it ends up clearing any restrictions
currently set. The intent is only to clear whatever it already applied,
but it ends up clearing everything, including whatever settings may have
been applied in a copy-on-write fashion already. Ensure that those are
retained.
Jens Axboe [Tue, 31 Mar 2026 13:07:47 +0000 (07:07 -0600)]
io_uring: protect remaining lockless ctx->rings accesses with RCU
Commit 96189080265e addressed one case of ctx->rings being potentially
accessed while a resize is happening on the ring, but there are still
a few others that need handling. Add a helper for retrieving the
rings associated with an io_uring context, and add some sanity checking
to that to catch bad uses. ->rings_rcu is always valid, as long as it's
used within RCU read lock. Any use of ->rings_rcu or ->rings inside
either ->uring_lock or ->completion_lock is sane as well.
Do the minimum fix for the current kernel, but set it up such that this
basic infra can be extended for later kernels to make this harder to
mess up in the future.
Thanks to Junxi Qian for finding and debugging this issue.
Merge tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 7.1, please pull the following:
- Rafal provides a complete description of the PCIe Root Complex nodes
in order to silence a number of dtc warnings
- Rosen provides the necessary NVMEM properties to allow describing the
WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
and Wi-Fi buttons for the Linksys EA9200 router
- Linus completes the BCA devices description by adding the I2C block
and fixing interrupts for the DMA block on 63138 and 6878
* tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: EA9200: specify partitions
ARM: dts: BCM5301X: EA9200: add LEDs
ARM: dts: BCM5301X: EA9200: add USB GPIOs
ARM: dts: BCM5301X: EA9200: add WiFi button
ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level
ARM: dts: bcm63148: Add I2C block
ARM: dts: bcm63138: Add I2C block
ARM: dts: bcm6878: Add I2C bus block
ARM: dts: bcm6855: Add I2C bus blocks
ARM: dts: bcm6846: Add I2C bus block
ARM: dts: bcm63138: Fix DMA IRQ
ARM: dts: bcm6878: Fix PL081 DMA block IRQ
ARM: dts: BCM5301X: AC5300: set WAN MAC from nvram
ARM: dts: BCM5301X: AC3100: set WAN MAC from nvram
ARM: dts: BCM5301X: panamera: set WAN MAC from nvram
ARM: dts: BCM5301X: EA9200: set WAN MAC from nvram
ARM: dts: BCM5301X: add root pcie bridges
ARM: dts: BCM5301X: Drop extra NAND controller compatible
ARM: dts: BCM5301X: Describe PCIe controllers fully
Ard Biesheuvel [Tue, 31 Mar 2026 11:04:23 +0000 (13:04 +0200)]
arm64: Use static call trampolines when kCFI is enabled
Implement arm64 support for the 'unoptimized' static call variety, which
routes all calls through a trampoline that performs a tail call to the
chosen function, and wire it up for use when kCFI is enabled. This works
around an issue with kCFI and generic static calls, where the prototypes
of default handlers such as __static_call_nop() and __static_call_ret0()
don't match the expected prototype of the call site, resulting in kCFI
false positives [0].
Since static call targets may be located in modules loaded out of direct
branching range, this needs an ADRP/LDR pair to load the branch target
into R16 and a branch-to-register (BR) instruction to perform an
indirect call.
Unlike on x86, there is no pressing need on arm64 to avoid indirect
calls at all cost, but hiding it from the compiler as is done here does
have some benefits:
- the literal is located in .rodata, which gives us the same robustness
advantage that code patching does;
- no D-cache pollution from fetching hash values from .text sections.
From an execution speed PoV, this is unlikely to make any difference at
all.
Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Kees Cook <kees@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will McVicker <willmcvicker@google.com> Reported-by: Carlos Llamas <cmllamas@google.com> Closes: https://lore.kernel.org/all/20260311225822.1565895-1-cmllamas@google.com/ [0] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stefan Berger [Wed, 25 Mar 2026 21:33:49 +0000 (17:33 -0400)]
evm: Enforce signatures version 3 with new EVM policy 'bit 3'
Enable the configuration of EVM so that it requires that asymmetric
signatures it accepts are of version 3 (sigv3). To enable this, introduce
bit 3 (value 0x0008) that the user may write to EVM's securityfs policy
configuration file 'evm' for sigv3 enforcement.
Mention bit 3 in the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Mimi Zohar [Tue, 10 Mar 2026 13:16:25 +0000 (09:16 -0400)]
ima: add support to require IMA sigv3 signatures
Defining a policy rule with the "appraise_type=imasig" option allows
either v2 or v3 signatures. Defining an IMA appraise rule with the
"appraise_type=sigv3" option requires a file sigv3 signature.
Mimi Zohar [Wed, 11 Mar 2026 01:36:44 +0000 (21:36 -0400)]
ima: add regular file data hash signature version 3 support
Instead of directly verifying the signature of a file data hash,
signature v3 verifies the signature of the ima_file_id structure
containing the file data hash.
To disambiguate the signature usage, the ima_file_id structure also
includes the hash algorithm and the type of data (e.g. regular file
hash or fs-verity root hash).
Tested-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Mimi Zohar [Tue, 10 Mar 2026 23:42:07 +0000 (19:42 -0400)]
ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
Define asymmetric_verify_v3() to calculate the hash of the struct
ima_file_id, before calling asymmetric_verify() to verify the
signature.
Move and update the existing calc_file_id_hash() function with a
simpler, self contained version. In addition to the existing hash
data and hash data length arguments, also pass the hash algorithm.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
genirq/affinity: Remove cpus_read_lock() while reading cpu_possible_mask
cpu_possible_mask is set early during boot based on information from the
firmware. After that it remains read only and is never changed. Therefore
there is no need to acquire the CPU-hotplug lock while reading it.
Remove cpus_read_*() while accessing cpu_possible_mask.
Guangshuo Li [Wed, 1 Apr 2026 02:45:35 +0000 (10:45 +0800)]
cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path
When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls
kobject_put(&dbs_data->attr_set.kobj).
The kobject release callback cpufreq_dbs_data_release() calls
gov->exit(dbs_data) and kfree(dbs_data), but the current error path
then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a
double free.
Keep the direct kfree(dbs_data) for the gov->init() failure path, but
after kobject_init_and_add() has been called, let kobject_put() handle
the cleanup through cpufreq_dbs_data_release().
Fixes: 4ebe36c94aed ("cpufreq: Fix kobject memleak") Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/20260401024535.1395801-1-lgs201920130244@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ville Syrjälä [Tue, 31 Mar 2026 15:42:56 +0000 (18:42 +0300)]
drm/i915/de: Add a simple intel_de_read64_2x32()
intel_de_read64_2x32_volatile() is a complex beast because
it needs to deal with volatile register values. For simpler
cases we can simply do a pair normal intel_de_read()s.
My main reason for hating overuse of intel_de_read64_2x32_volatile()
is that it makes register tracepoints confusing. It always
does three accesses in the somewhat weird udw,ldw,udw order,
confusing the reader of the trace. Much more clear if we just
observe the two reads in the natural little endian order.
We also have no non-volatile use case where the LDW and UDW
are stored in non-consecutive registers, so we can just pass
along a single register offset.
The raison d'etre of intel_de_read64_2x32() is that it can
handle registers where volatile values are split across two
registers. I don't like that it's being used needlessly.
Rename it to intel_de_read64_2x32_volatile() to make it
more clear when it should be used.
Ville Syrjälä [Tue, 31 Mar 2026 15:42:54 +0000 (18:42 +0300)]
drm/i915/de: Add intel_de_read16()
We'll need a replacement for intel_uncore_read16() in order to
untangle intel_mchbar_read16() from uncore. As with the 8 bit
counterpart this doesn't need to work on modern platforms
so we can forgo all the DMC wakelock stuff and whatnot.
Ville Syrjälä [Tue, 31 Mar 2026 15:42:51 +0000 (18:42 +0300)]
drm/i915/mchbar: WARN when accessing non-MCHBAR registers via intel_mchbar_read*()
The intel_mchbar_read*() functions should only be used for
accessing MCHBAR registers. Warn if someone tries to use
them for other registers.
I suppose we could even have a dedicated type for MCHBAR
registers. But that is true for many other special register
types as well, and so far we haven't bothered adding any
special types apart from i915_mcr_reg_t.
v2: Print the register offset (Jani)
Mention i915_mcr_reg_t (Jani)
powercap: intel_rapl: Consolidate PL4 and PMU support flags into rapl_defaults
Currently, PL4 and MSR-based RAPL PMU support are detected using
separate CPU ID tables (pl4_support_ids and pmu_support_ids) in the
MSR driver probe path. This creates a maintenance burden since adding
a new CPU requires updates in two places: the rapl_ids table and one
or both of these capability tables.
Consolidate PL4 and PMU capability information directly into
struct rapl_defaults by adding msr_pl4_support and msr_pmu_support
flags. This allows per-CPU capability to be expressed in a single
place alongside other per-CPU defaults, eliminating the duplicate
CPU ID tables entirely.
powercap: intel_rapl: Move MSR primitives to MSR driver
MSR-specific RAPL primitives differ from those used by TPMI and MMIO
interfaces. Keeping them in the common driver requires
interface-specific handling logic and makes the common layer
unnecessarily complex.
Move the MSR primitive definitions and associated bitmasks into the
MSR interface driver. This change includes:
1. Move MSR-specific bitmask definitions to RAPL MSR driver.
2. Add MSR-local struct rapl_primitive_info instance and assign it to
priv->rpi during MSR probe.
3. Remove the primitive assignment logic from rapl_config() in the
common driver.
thermal: intel: int340x: processor: Move MMIO primitives to MMIO driver
MMIO-specific primitives differ from those used by the TPMI interface.
The MSR and MMIO interfaces shared the same primitives in the common
driver, but MMIO does not require many MSR-specific entries (like PSYS).
Keeping these in the common driver does not add any value and requires
interface-specific handling logic that makes the common layer
unnecessarily complex.
Move the MMIO primitive definitions and associated bitmasks into the
MMIO interface driver. This change includes:
1. Add MMIO-local struct rapl_primitive_info instance without
MSR-specific entries and assign it to priv->rpi during MMIO
initialization.
2. Remove the RAPL MMIO case from rapl_config() in the common driver.
powercap: intel_rapl: Move TPMI primitives to TPMI driver
TPMI-specific RAPL primitives differ from those used by MSR and MMIO
interfaces. Keeping them in the common RAPL driver requires
interface-specific handling logic and makes the common layer
unnecessarily complex.
Move the TPMI primitive definitions and associated bitmasks into the
TPMI interface driver. This change includes:
1. Move TPMI-specific bitmask definitions from intel_rapl_common.c to
intel_rapl_tpmi.c.
2. Add TPMI-local struct rapl_primitive_info instance and assign it to
priv->rpi during TPMI probe.
3. Remove the RAPL TPMI related definitions from the common driver.
powercap: intel_rapl: Move primitive info to header for interface drivers
RAPL primitive information varies across different RAPL interfaces
(MSR, TPMI, MMIO). Keeping them in the common code adds no benefit, but
requires interface-specific handling logic and makes the common layer
unnecessarily complex.
Move the primitive info infrastructure to the shared header to allow
interface drivers to configure RAPL primitives. Specific changes:
1. Move struct rapl_primitive_info, enum unit_type, and
PRIMITIVE_INFO_INIT macro to intel_rapl.h.
2. Change the @rpi field in struct rapl_if_priv from void * to
struct rapl_primitive_info * to improve type safety and eliminate
unnecessary casts.
No functional changes. This is a preparatory refactoring to allow
interface drivers to supply their own RAPL primitive settings.
powercap: intel_rapl: Move MSR default settings into MSR interface driver
MSR-specific RAPL defaults differ from those used by the TPMI interface.
The MMIO and MSR interfaces shared the same rapl_defaults pointer in the
common driver, but MMIO does not require the CPU-specific variations
needed by MSR. Keeping these in the common driver adds unnecessary
complexity and MSR-specific initialization.
Move MSR defaults and CPU matching into the MSR interface driver.
Moves
-----
* Move rapl_check_unit_atom(), set_floor_freq_atom(), and
rapl_compute_time_window_atom() into intel_rapl_msr.c.
* Move MSR unit-field GENMASK definitions and local constants.
* Move all MSR-related rapl_defaults tables and the CPU-ID matching
logic (rapl_ids[]) into the MSR driver.
* Move iosf_mbi dependencies (floor-frequency control and related MBI
register definitions) as they are MSR-platform specific.
Modifications
-------------
* Replace the common driver's platform-device manual alloc/add sequence
with platform_device_register_data() in the MSR driver to pass
matching rapl_defaults as platform_data.
* Update MSR driver probe to assign pdev->dev.platform_data to
priv->defaults.
* Update Atom helper functions to use rp->lead_cpu directly for MSR
reads/writes instead of the generic get_rid().
* Update Atom floor frequency logic to access defaults via the
package private data pointer.
* Convert MSR device creation from fs_initcall() to module_init().
This preserves existing enumeration behavior as the driver was
already using module_init().
* Since rapl_ids need to exist after boot, remove __initconst
specifier.
Ville Syrjälä [Tue, 31 Mar 2026 15:42:49 +0000 (18:42 +0300)]
drm/i915/mchbar: Provide intel_mchbar_read*() abstraction
MCHBAR registers are a bit special in that:
- we access them through the mirror
- the mirror is read only on HSW+
- the mirror requires the actual MCHBAR to be enabled in device 0:0.0
- the mirror is gone on MTL+
So I'd prefer to treat MCHBAR registers as a bit special in
the code as well, and do all accesses to them via dedicated
functions. Prodive such functions in the form of
intel_mchbar_read*().
v2: Put the function arguments on one line
No intel_uncore_read64() on xe, use intel_uncore_read64_2x32()
Name the new function intel_mchbar_read64_2x32() as well
Julian Braha [Tue, 31 Mar 2026 07:49:20 +0000 (08:49 +0100)]
cpuidle: clean up dead dependencies on CPU_IDLE in Kconfig
The Kconfig in the parent directory already has the first 'if CPU_IDLE'
gating the inclusion of this Kconfig, meaning that the 'depends on
CPUIDLE' statements in these config options are effectively dead code.
Leave the 'if CPU_IDLE...endif' condition, and remove the individual
'depends on' statements in Kconfig.mips and Kconfig.powerpc
This dead code was found by kconfirm, a static analysis tool for
Kconfig.
Julian Braha [Tue, 31 Mar 2026 07:42:42 +0000 (08:42 +0100)]
cpufreq: clean up dead code in Kconfig
There is already an 'if CPU_FREQ' condition wrapping these config
options, making the 'depends on' statement for each a duplicate
dependency (dead code).
Leave the outer 'if CPU_FREQ...endif' and remove the individual
'depends on' statement from each option.
This dead code was found by kconfirm, a static analysis tool for
Kconfig.
projects / thirdparty / kernel / stable.git / log
