if [[ -n "${IP_VERSION}" ]]; then
[[ "${IP_VERSION}" = "4" || "${IP_VERSION}" = "6" ]] || _exiterr "Unknown IP version ${IP_VERSION}... cannot continue."
fi
- [[ "${API}" == "auto" || "${API}" == "1" || "${API}" == "2" ]] || _exiterr "Unsupported API version defined in config: ${API}"
+ [[ "${API}" == "auto" || "${API}" == "2" ]] || _exiterr "Unsupported API version defined in config: ${API}"
[[ "${OCSP_DAYS}" =~ ^[0-9]+$ ]] || _exiterr "OCSP_DAYS must be a number"
}
# Automatic discovery of API version
if [[ "${API}" = "auto" ]]; then
- grep -q newOrder <<< "${CA_DIRECTORY}" && API=2 || API=1
+ grep -q newOrder <<< "${CA_DIRECTORY}" && API=2 || _exiterr "API version 1 is no longer supported"
fi
- if [[ ${API} -eq 1 ]]; then
- # shellcheck disable=SC2015
- CA_NEW_CERT="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value new-cert)" &&
- CA_NEW_AUTHZ="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value new-authz)" &&
- CA_NEW_REG="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value new-reg)" &&
- CA_TERMS="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value terms-of-service)" &&
- CA_REVOKE_CERT="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value revoke-cert)" ||
- _exiterr "Problem retrieving ACME/CA-URLs, check if your configured CA points to the directory entrypoint."
- # Since reg URI is missing from directory we will assume it is the same as CA_NEW_REG without the new part
- CA_REG=${CA_NEW_REG/new-reg/reg}
- else
- # shellcheck disable=SC2015
- CA_NEW_ORDER="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value newOrder)" &&
- CA_NEW_NONCE="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value newNonce)" &&
- CA_NEW_ACCOUNT="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value newAccount)" &&
- CA_TERMS="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value termsOfService)" &&
- CA_REVOKE_CERT="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value revokeCert)" ||
- _exiterr "Problem retrieving ACME/CA-URLs, check if your configured CA points to the directory entrypoint."
- # Since acct URI is missing from directory we will assume it is the same as CA_NEW_ACCOUNT without the new part
- CA_ACCOUNT=${CA_NEW_ACCOUNT/new-acct/acct}
- fi
+ # shellcheck disable=SC2015
+ CA_NEW_ORDER="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value newOrder)" &&
+ CA_NEW_NONCE="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value newNonce)" &&
+ CA_NEW_ACCOUNT="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value newAccount)" &&
+ CA_TERMS="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value termsOfService)" &&
+ CA_REVOKE_CERT="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value revokeCert)" ||
+ _exiterr "Problem retrieving ACME/CA-URLs, check if your configured CA points to the directory entrypoint."
+ # Since acct URI is missing from directory we will assume it is the same as CA_NEW_ACCOUNT without the new part
+ CA_ACCOUNT=${CA_NEW_ACCOUNT/new-acct/acct}
# Export some environment variables to be used in hook script
export WELLKNOWN BASEDIR CERTDIR ALPNCERTDIR CONFIG COMMAND
echo "+ Registering account key with ACME server..."
FAILED=false
- if [[ ${API} -eq 1 && -z "${CA_NEW_REG}" ]] || [[ ${API} -eq 2 && -z "${CA_NEW_ACCOUNT}" ]]; then
+ if [[ -z "${CA_NEW_ACCOUNT}" ]]; then
echo "Certificate authority doesn't allow registrations."
FAILED=true
fi
# If an email for the contact has been provided then adding it to the registration request
if [[ "${FAILED}" = "false" ]]; then
- if [[ ${API} -eq 1 ]]; then
- if [[ -n "${CONTACT_EMAIL}" ]]; then
- (signed_request "${CA_NEW_REG}" '{"resource": "new-reg", "contact":["mailto:'"${CONTACT_EMAIL}"'"], "agreement": "'"${CA_TERMS}"'"}' > "${ACCOUNT_KEY_JSON}") || FAILED=true
- else
- (signed_request "${CA_NEW_REG}" '{"resource": "new-reg", "agreement": "'"${CA_TERMS}"'"}' > "${ACCOUNT_KEY_JSON}") || FAILED=true
- fi
+ if [[ -n "${CONTACT_EMAIL}" ]]; then
+ (signed_request "${CA_NEW_ACCOUNT}" '{"contact":["mailto:'"${CONTACT_EMAIL}"'"], "termsOfServiceAgreed": true}' > "${ACCOUNT_KEY_JSON}") || FAILED=true
else
- if [[ -n "${CONTACT_EMAIL}" ]]; then
- (signed_request "${CA_NEW_ACCOUNT}" '{"contact":["mailto:'"${CONTACT_EMAIL}"'"], "termsOfServiceAgreed": true}' > "${ACCOUNT_KEY_JSON}") || FAILED=true
- else
- (signed_request "${CA_NEW_ACCOUNT}" '{"termsOfServiceAgreed": true}' > "${ACCOUNT_KEY_JSON}") || FAILED=true
- fi
+ (signed_request "${CA_NEW_ACCOUNT}" '{"termsOfServiceAgreed": true}' > "${ACCOUNT_KEY_JSON}") || FAILED=true
fi
fi
# Read account information or request from CA if missing
if [[ -e "${ACCOUNT_KEY_JSON}" ]]; then
ACCOUNT_ID="$(cat "${ACCOUNT_KEY_JSON}" | get_json_int_value id)"
- if [[ ${API} -eq 1 ]]; then
- ACCOUNT_URL="${CA_REG}/${ACCOUNT_ID}"
- else
- ACCOUNT_URL="${CA_ACCOUNT}/${ACCOUNT_ID}"
- fi
+ ACCOUNT_URL="${CA_ACCOUNT}/${ACCOUNT_ID}"
else
echo "Fetching missing account information from CA..."
- if [[ ${API} -eq 1 ]]; then
- _exiterr "This is not implemented for ACMEv1! Consider switching to ACMEv2 :)"
- else
- ACCOUNT_URL="$(signed_request "${CA_NEW_ACCOUNT}" '{"onlyReturnExisting": true}' 4>&1 | grep -i ^Location: | awk '{print $2}' | tr -d '\r\n')"
- ACCOUNT_INFO="$(signed_request "${ACCOUNT_URL}" '{}')"
- fi
+ ACCOUNT_URL="$(signed_request "${CA_NEW_ACCOUNT}" '{"onlyReturnExisting": true}' 4>&1 | grep -i ^Location: | awk '{print $2}' | tr -d '\r\n')"
+ ACCOUNT_INFO="$(signed_request "${ACCOUNT_URL}" '{}')"
ACCOUNT_ID="${ACCOUNT_URL##*/}"
echo "${ACCOUNT_INFO}" > "${ACCOUNT_KEY_JSON}"
fi
fi
if [[ ! "${statuscode:0:1}" = "2" ]]; then
- # check for existing registration warning
- if [[ "${API}" = "1" ]] && [[ -n "${CA_NEW_REG:-}" ]] && [[ "${2}" = "${CA_NEW_REG:-}" ]] && [[ "${statuscode}" = "409" ]] && grep -q "Registration key is already in use" "${tempcont}"; then
- # do nothing
- :
# check for already-revoked warning
- elif [[ -n "${CA_REVOKE_CERT:-}" ]] && [[ "${2}" = "${CA_REVOKE_CERT:-}" ]] && [[ "${statuscode}" = "409" ]]; then
+ if [[ -n "${CA_REVOKE_CERT:-}" ]] && [[ "${2}" = "${CA_REVOKE_CERT:-}" ]] && [[ "${statuscode}" = "409" ]]; then
grep -q "Certificate already revoked" "${tempcont}" && return
else
echo " + ERROR: An error occurred while sending ${1}-request to ${2} (Status ${statuscode})" >&2
payload64="$(printf '%s' "${2}" | urlbase64)"
# Retrieve nonce from acme-server
- if [[ ${API} -eq 1 ]]; then
- nonce="$(http_request head "${CA}" | grep -i ^Replay-Nonce: | awk -F ': ' '{print $2}' | tr -d '\n\r')"
- else
- nonce="$(http_request head "${CA_NEW_NONCE}" | grep -i ^Replay-Nonce: | awk -F ': ' '{print $2}' | tr -d '\n\r')"
- fi
+ nonce="$(http_request head "${CA_NEW_NONCE}" | grep -i ^Replay-Nonce: | awk -F ': ' '{print $2}' | tr -d '\n\r')"
# Build header with just our public key and algorithm information
header='{"alg": "RS256", "jwk": {"e": "'"${pubExponent64}"'", "kty": "RSA", "n": "'"${pubMod64}"'"}}'
- if [[ ${API} -eq 1 ]]; then
- # Build another header which also contains the previously received nonce and encode it as urlbase64
- protected='{"alg": "RS256", "jwk": {"e": "'"${pubExponent64}"'", "kty": "RSA", "n": "'"${pubMod64}"'"}, "nonce": "'"${nonce}"'"}'
- protected64="$(printf '%s' "${protected}" | urlbase64)"
+ # Build another header which also contains the previously received nonce and url and encode it as urlbase64
+ if [[ -n "${ACCOUNT_URL:-}" ]]; then
+ protected='{"alg": "RS256", "kid": "'"${ACCOUNT_URL}"'", "url": "'"${1}"'", "nonce": "'"${nonce}"'"}'
else
- # Build another header which also contains the previously received nonce and url and encode it as urlbase64
- if [[ -n "${ACCOUNT_URL:-}" ]]; then
- protected='{"alg": "RS256", "kid": "'"${ACCOUNT_URL}"'", "url": "'"${1}"'", "nonce": "'"${nonce}"'"}'
- else
- protected='{"alg": "RS256", "jwk": {"e": "'"${pubExponent64}"'", "kty": "RSA", "n": "'"${pubMod64}"'"}, "url": "'"${1}"'", "nonce": "'"${nonce}"'"}'
- fi
- protected64="$(printf '%s' "${protected}" | urlbase64)"
+ protected='{"alg": "RS256", "jwk": {"e": "'"${pubExponent64}"'", "kty": "RSA", "n": "'"${pubMod64}"'"}, "url": "'"${1}"'", "nonce": "'"${nonce}"'"}'
fi
+ protected64="$(printf '%s' "${protected}" | urlbase64)"
# Sign header with nonce and our payload with our private key and encode signature as urlbase64
signed64="$(printf '%s' "${protected64}.${payload64}" | "${OPENSSL}" dgst -sha256 -sign "${ACCOUNT_KEY}" | urlbase64)"
- if [[ ${API} -eq 1 ]]; then
- # Send header + extended header + payload + signature to the acme-server
- data='{"header": '"${header}"', "protected": "'"${protected64}"'", "payload": "'"${payload64}"'", "signature": "'"${signed64}"'"}'
- else
- # Send extended header + payload + signature to the acme-server
- data='{"protected": "'"${protected64}"'", "payload": "'"${payload64}"'", "signature": "'"${signed64}"'"}'
- fi
+ # Send extended header + payload + signature to the acme-server
+ data='{"protected": "'"${protected64}"'", "payload": "'"${payload64}"'", "signature": "'"${signed64}"'"}'
http_request post "${1}" "${data}"
}
shift 1 || true
export altnames="${*}"
- if [[ ${API} -eq 1 ]]; then
- if [[ -z "${CA_NEW_AUTHZ}" ]] || [[ -z "${CA_NEW_CERT}" ]]; then
- _exiterr "Certificate authority doesn't allow certificate signing"
- fi
- elif [[ ${API} -eq 2 ]] && [[ -z "${CA_NEW_ORDER}" ]]; then
+ if [[ -z "${CA_NEW_ORDER}" ]]; then
_exiterr "Certificate authority doesn't allow certificate signing"
fi
local -a challenge_names challenge_uris challenge_tokens authorizations keyauths deploy_args
fi
- # Initial step: Find which authorizations we're dealing with
- if [[ ${API} -eq 2 ]]; then
- # Request new order and store authorization URIs
- local challenge_identifiers=""
- for altname in ${altnames}; do
- challenge_identifiers+="$(printf '{"type": "dns", "value": "%s"}, ' "${altname}")"
- done
- challenge_identifiers="[${challenge_identifiers%, }]"
+ # Request new order and store authorization URIs
+ local challenge_identifiers=""
+ for altname in ${altnames}; do
+ challenge_identifiers+="$(printf '{"type": "dns", "value": "%s"}, ' "${altname}")"
+ done
+ challenge_identifiers="[${challenge_identifiers%, }]"
- echo " + Requesting new certificate order from CA..."
- result="$(signed_request "${CA_NEW_ORDER}" '{"identifiers": '"${challenge_identifiers}"'}')"
+ echo " + Requesting new certificate order from CA..."
+ result="$(signed_request "${CA_NEW_ORDER}" '{"identifiers": '"${challenge_identifiers}"'}')"
- order_authorizations="$(echo ${result} | get_json_array_value authorizations)"
- finalize="$(echo "${result}" | get_json_string_value finalize)"
+ order_authorizations="$(echo ${result} | get_json_array_value authorizations)"
+ finalize="$(echo "${result}" | get_json_string_value finalize)"
- local idx=0
- for uri in ${order_authorizations}; do
- authorizations[${idx}]="$(echo "${uri}" | _sed -e 's/\"(.*)".*/\1/')"
- idx=$((idx+1))
- done
- echo " + Received ${idx} authorizations URLs from the CA"
- else
- # Copy $altnames to $authorizations (just doing this to reduce duplicate code later on)
- local idx=0
- for altname in ${altnames}; do
- authorizations[${idx}]="${altname}"
- idx=$((idx+1))
- done
- fi
+ local idx=0
+ for uri in ${order_authorizations}; do
+ authorizations[${idx}]="$(echo "${uri}" | _sed -e 's/\"(.*)".*/\1/')"
+ idx=$((idx+1))
+ done
+ echo " + Received ${idx} authorizations URLs from the CA"
# Check if authorizations are valid and gather challenge information for pending authorizations
local idx=0
for authorization in ${authorizations[*]}; do
- if [[ "${API}" -eq 2 ]]; then
- # Receive authorization ($authorization is authz uri)
- response="$(signed_request "$(echo "${authorization}" | _sed -e 's/\"(.*)".*/\1/')" "" | clean_json)"
- identifier="$(echo "${response}" | get_json_dict_value identifier | get_json_string_value value)"
- echo " + Handling authorization for ${identifier}"
- else
- # Request new authorization ($authorization is altname)
- identifier="${authorization}"
- echo " + Requesting authorization for ${identifier}..."
- response="$(signed_request "${CA_NEW_AUTHZ}" '{"resource": "new-authz", "identifier": {"type": "dns", "value": "'"${identifier}"'"}}' | clean_json)"
- fi
+ # Receive authorization ($authorization is authz uri)
+ response="$(signed_request "$(echo "${authorization}" | _sed -e 's/\"(.*)".*/\1/')" "" | clean_json)"
+ identifier="$(echo "${response}" | get_json_dict_value identifier | get_json_string_value value)"
+ echo " + Handling authorization for ${identifier}"
# Check if authorization has already been validated
if [ "$(echo "${response}" | _sed 's/"challenges": \[\{.*\}\]//' | get_json_string_value status)" = "valid" ] && [ ! "${PARAM_FORCE:-no}" = "yes" ]; then
# Gather challenge information
challenge_names[${idx}]="${identifier}"
challenge_tokens[${idx}]="$(echo "${challenge}" | get_json_string_value token)"
- if [[ ${API} -eq 2 ]]; then
- challenge_uris[${idx}]="$(echo "${challenge}" | _sed 's/"validationRecord": ?\[[^]]+\]//g' | get_json_string_value url)"
- else
- challenge_uris[${idx}]="$(echo "${challenge}" | _sed 's/"validationRecord": ?\[[^]]+\]//g' | get_json_string_value uri)"
- fi
+ challenge_uris[${idx}]="$(echo "${challenge}" | _sed 's/"validationRecord": ?\[[^]]+\]//g' | get_json_string_value url)"
# Prepare challenge tokens and deployment parameters
keyauth="${challenge_tokens[${idx}]}.${thumbprint}"
echo " + Responding to challenge for ${challenge_names[${idx}]} authorization..."
# Ask the acme-server to verify our challenge and wait until it is no longer pending
- if [[ ${API} -eq 1 ]]; then
- result="$(signed_request "${challenge_uris[${idx}]}" '{"resource": "challenge", "keyAuthorization": "'"${keyauths[${idx}]}"'"}' | clean_json)"
- else
- result="$(signed_request "${challenge_uris[${idx}]}" '{"keyAuthorization": "'"${keyauths[${idx}]}"'"}' | clean_json)"
- fi
+ result="$(signed_request "${challenge_uris[${idx}]}" '{"keyAuthorization": "'"${keyauths[${idx}]}"'"}' | clean_json)"
reqstatus="$(printf '%s\n' "${result}" | get_json_string_value status)"
while [[ "${reqstatus}" = "pending" ]]; do
sleep 1
- if [[ "${API}" -eq 2 ]]; then
- result="$(signed_request "${challenge_uris[${idx}]}" "")"
- else
- result="$(http_request get "${challenge_uris[${idx}]}")"
- fi
+ result="$(signed_request "${challenge_uris[${idx}]}" "")"
reqstatus="$(printf '%s\n' "${result}" | get_json_string_value status)"
done
# Finally request certificate from the acme-server and store it in cert-${timestamp}.pem and link from cert.pem
echo " + Requesting certificate..."
csr64="$( <<<"${csr}" "${OPENSSL}" req -config "${OPENSSL_CNF}" -outform DER | urlbase64)"
- if [[ ${API} -eq 1 ]]; then
- crt64="$(signed_request "${CA_NEW_CERT}" '{"resource": "new-cert", "csr": "'"${csr64}"'"}' | "${OPENSSL}" base64 -e)"
- crt="$( printf -- '-----BEGIN CERTIFICATE-----\n%s\n-----END CERTIFICATE-----\n' "${crt64}" )"
- else
- result="$(signed_request "${finalize}" '{"csr": "'"${csr64}"'"}' | clean_json | get_json_string_value certificate)"
- crt="$(signed_request "${result}" "")"
- fi
+ result="$(signed_request "${finalize}" '{"csr": "'"${csr64}"'"}' | clean_json | get_json_string_value certificate)"
+ crt="$(signed_request "${result}" "")"
# Try to load the certificate to detect corruption
echo " + Checking certificate..."
export altnames
echo " + Signing domains..."
- if [[ ${API} -eq 1 ]]; then
- if [[ -z "${CA_NEW_AUTHZ}" ]] || [[ -z "${CA_NEW_CERT}" ]]; then
- _exiterr "Certificate authority doesn't allow certificate signing"
- fi
- elif [[ ${API} -eq 2 ]] && [[ -z "${CA_NEW_ORDER}" ]]; then
+ if [[ -z "${CA_NEW_ORDER}" ]]; then
_exiterr "Certificate authority doesn't allow certificate signing"
fi
# Create fullchain.pem
echo " + Creating fullchain.pem..."
- if [[ ${API} -eq 1 ]]; then
- cat "${crt_path}" > "${certdir}/fullchain-${timestamp}.pem"
- local issuer_hash
- issuer_hash="$(get_issuer_hash "${crt_path}")"
- if [ -e "${CHAINCACHE}/${issuer_hash}.chain" ]; then
- echo " + Using cached chain!"
- cat "${CHAINCACHE}/${issuer_hash}.chain" > "${certdir}/chain-${timestamp}.pem"
- else
- echo " + Walking chain..."
- local issuer_cert_uri
- issuer_cert_uri="$(get_issuer_cert_uri "${crt_path}" || echo "unknown")"
- (walk_chain "${crt_path}" > "${certdir}/chain-${timestamp}.pem") || _exiterr "Walking chain has failed, your certificate has been created and can be found at ${crt_path}, the corresponding private key at ${privkey}. If you want you can manually continue on creating and linking all necessary files. If this error occurs again you should manually generate the certificate chain and place it under ${CHAINCACHE}/${issuer_hash}.chain (see ${issuer_cert_uri})"
- cat "${certdir}/chain-${timestamp}.pem" > "${CHAINCACHE}/${issuer_hash}.chain"
- fi
- cat "${certdir}/chain-${timestamp}.pem" >> "${certdir}/fullchain-${timestamp}.pem"
- else
- tmpcert="$(_mktemp)"
- tmpchain="$(_mktemp)"
- awk '{print >out}; /----END CERTIFICATE-----/{out=tmpchain}' out="${tmpcert}" tmpchain="${tmpchain}" "${certdir}/cert-${timestamp}.pem"
- mv "${certdir}/cert-${timestamp}.pem" "${certdir}/fullchain-${timestamp}.pem"
- cat "${tmpcert}" > "${certdir}/cert-${timestamp}.pem"
- cat "${tmpchain}" > "${certdir}/chain-${timestamp}.pem"
- rm "${tmpcert}" "${tmpchain}"
- fi
+ tmpcert="$(_mktemp)"
+ tmpchain="$(_mktemp)"
+ awk '{print >out}; /----END CERTIFICATE-----/{out=tmpchain}' out="${tmpcert}" tmpchain="${tmpchain}" "${certdir}/cert-${timestamp}.pem"
+ mv "${certdir}/cert-${timestamp}.pem" "${certdir}/fullchain-${timestamp}.pem"
+ cat "${tmpcert}" > "${certdir}/cert-${timestamp}.pem"
+ cat "${tmpchain}" > "${certdir}/chain-${timestamp}.pem"
+ rm "${tmpcert}" "${tmpchain}"
# Wait for hook script to sync the files before creating the symlinks
[[ -n "${HOOK}" ]] && "${HOOK}" "sync_cert" "${certdir}/privkey-${timestamp}.pem" "${certdir}/cert-${timestamp}.pem" "${certdir}/fullchain-${timestamp}.pem" "${certdir}/chain-${timestamp}.pem" "${certdir}/cert-${timestamp}.csr"
fi
echo "+ Updating registration id: ${ACCOUNT_ID} contact information..."
- if [[ ${API} -eq 1 ]]; then
- # If an email for the contact has been provided then adding it to the registered account
- if [[ -n "${CONTACT_EMAIL}" ]]; then
- (signed_request "${ACCOUNT_URL}" '{"resource": "reg", "contact":["mailto:'"${CONTACT_EMAIL}"'"]}' > "${NEW_ACCOUNT_KEY_JSON}") || FAILED=true
- else
- (signed_request "${ACCOUNT_URL}" '{"resource": "reg", "contact":[]}' > "${NEW_ACCOUNT_KEY_JSON}") || FAILED=true
- fi
+ # If an email for the contact has been provided then adding it to the registered account
+ if [[ -n "${CONTACT_EMAIL}" ]]; then
+ (signed_request "${ACCOUNT_URL}" '{"contact":["mailto:'"${CONTACT_EMAIL}"'"]}' > "${NEW_ACCOUNT_KEY_JSON}") || FAILED=true
else
- # If an email for the contact has been provided then adding it to the registered account
- if [[ -n "${CONTACT_EMAIL}" ]]; then
- (signed_request "${ACCOUNT_URL}" '{"contact":["mailto:'"${CONTACT_EMAIL}"'"]}' > "${NEW_ACCOUNT_KEY_JSON}") || FAILED=true
- else
- (signed_request "${ACCOUNT_URL}" '{"contact":[]}' > "${NEW_ACCOUNT_KEY_JSON}") || FAILED=true
- fi
+ (signed_request "${ACCOUNT_URL}" '{"contact":[]}' > "${NEW_ACCOUNT_KEY_JSON}") || FAILED=true
fi
if [[ "${FAILED}" = "true" ]]; then
echo "Revoking ${cert}"
cert64="$("${OPENSSL}" x509 -in "${cert}" -inform PEM -outform DER | urlbase64)"
- if [[ ${API} -eq 1 ]]; then
- response="$(signed_request "${CA_REVOKE_CERT}" '{"resource": "revoke-cert", "certificate": "'"${cert64}"'"}' | clean_json)"
- else
- response="$(signed_request "${CA_REVOKE_CERT}" '{"certificate": "'"${cert64}"'"}' | clean_json)"
- fi
+ response="$(signed_request "${CA_REVOKE_CERT}" '{"certificate": "'"${cert64}"'"}' | clean_json)"
+
# if there is a problem with our revoke request _request (via signed_request) will report this and "exit 1" out
# so if we are here, it is safe to assume the request was successful
echo " + Done."
projects / thirdparty / dehydrated.git / commitdiff
