--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "netis,n6", "mediatek,mt7621-soc";
+ model = "netis N6";
+
+ aliases {
+ label-mac-device = &gmac0;
+
+ led-boot = &led_power_green;
+ led-failsafe = &led_system_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_system_green;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ key-0 {
+ label = "wps";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ key-1 {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_USB;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WPS;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system_green: led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: led-4 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_7ef20 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_7ef26 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ mediatek,nmbm;
+ mediatek,bmt-remap-range = <0x000000 0x580000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "Config";
+ reg = <0x80000 0x80000>;
+ };
+
+ partition@100000 {
+ label = "Factory";
+ reg = <0x100000 0x80000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0xe00>;
+ };
+
+ macaddr_factory_7ef20: macaddr@7ef20 {
+ reg = <0x7ef20 0x6>;
+ };
+
+ macaddr_factory_7ef26: macaddr@7ef26 {
+ reg = <0x7ef26 0x6>;
+ };
+ };
+ };
+
+ partition@180000 {
+ label = "firmware";
+ reg = <0x180000 0x7680000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7280000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+
+ /*
+ * *** The code block below is commented out ***
+ * Reason: Probably, original Netis N6 EEPROM has wrong
+ * MT_EE_WIFI_CONF value 0xd2. As a result 2.4 GHz
+ * doesn't start with mt76 driver. Other routers
+ * with the same WLAN chips (e.g., Routerich
+ * AX1800) have MT_EE_WIFI_CONF = 0x92.
+ * Workaround: Extract EEPROM to a file at the first time
+ * boot and change MT_EE_WIFI_CONF (offset
+ * 0x190) value from 0xd2 to 0x92. See
+ * /etc/hotplug.d/firmware/11-mt76-caldata for
+ * details.
+ */
+
+ /*
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+ */
+
+ mediatek,disable-radar-background;
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "jtag", "wdt";
+ function = "gpio";
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan1";
+ };
+ };
+};
rm $@metadata.tmp
endef
+define Build/append-netis-n6-metadata
+ ( echo -ne '{ \
+ "up_model": "Netis-N6R", \
+ "supported_devices": ["mt7621-rfb-ax-nand"], \
+ "version": { \
+ "dist": "$(call json_quote,$(VERSION_DIST))", \
+ "version": "$(call json_quote,$(VERSION_NUMBER))", \
+ "revision": "$(call json_quote,$(REVISION))", \
+ "board": "$(call json_quote,$(BOARD))" \
+ } }' \
+ ) > $@.metadata.tmp
+ fwtool -I $@.metadata.tmp $@
+ rm $@.metadata.tmp
+endef
+
define Build/arcadyan-trx
echo -ne "hsqs" > $@.hsqs
$(eval trx_magic=$(word 1,$(1)))
endef
TARGET_DEVICES += netgear_wndr3700-v5
+define Device/netis_n6
+ $(Device/dsa-migration)
+ $(Device/nand)
+ IMAGE_SIZE := 121344k
+ DEVICE_VENDOR := netis
+ DEVICE_MODEL := N6
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
+ append-ubi | check-size | append-netis-n6-metadata
+ DEVICE_PACKAGES += kmod-mt7915-firmware kmod-usb-ledtrig-usbport \
+ kmod-usb3
+endef
+TARGET_DEVICES += netis_n6
+
define Device/netis_wf2881
$(Device/nand)
$(Device/uimage-lzma-loader)
projects / thirdparty / openwrt.git / commitdiff
