Kinga Stefaniuk [Thu, 24 Oct 2024 13:09:47 +0000 (15:09 +0200)]
func.sh: do not hang when grow-continue can't finish
When grow-continue process is ongoing, sync_action indicates that
recovery is in progress. If grow-continue does not finish,
even if sync_action is not "reshape" anymore, the test should fail.
Kinga Stefaniuk [Thu, 10 Oct 2024 06:35:46 +0000 (08:35 +0200)]
Fix 07reshape5initr test
This test could hang if "check" action is not written to sync_action. If
this value didn't appear, test hanged on infinite while loop. Add 5
second timeout to loop.
Add print IMSM license for VMD controllers in --detail-platform.
The license specifies the scope of RAID support in the platform for
the VMD controller.
Mariusz Tkaczyk [Mon, 7 Oct 2024 12:20:17 +0000 (14:20 +0200)]
mdadm: drop auto= support
According to author (and what was described in man):
"With mdadm 3.0, device creation is normally left up to udev so this is
option is unlikely to be needed"
This was a workaround for kernel 2.6 family issues (partitionable and
non-partitionable arrays hell) and I believe we are far away from it now.
I'm not aware of any usage of it, hence it is removed.
Starting from [1], kernel requires suspend lock on member drive remove
path. It causes deadlock with external management because monitor
thread may be locked on suspend and is unable to switch array to active,
for example if badblock is reported in this time.
It is blocking action now, so it must be delegated to managemon thread
but we must ensure that monitor does metadata update first, just after
detecting faulty.
This patch adds appropriative support. Monitor thread detects "faulty",
and updates the metadata. After that, it is asking manager thread to
remove the device. Manager must be careful because closing descriptors
used by select() may lead to abort with D_FORTIFY_SOURCE=2. First, it
must ensure that device descriptors are not used by monitor.
There is unlimited numer of remove retries and recovery is blocked
until all failed drives are removed. It is safe because "faulty"
device is not longer used by MD.
Issue will be also mitigated by optimalization on badlbock recording path
in kernel. It will check if device is not failed before badblock is
recorded but relying on this is not ideologically correct. Userspace
must keep compatibility with kernel and since it is blocking action,
we must tract is as blocking action.
[1] kernel commit cfa078c8b80d ("md: use new apis to suspend array
for adding/removing rdev from state_store()")
Mariusz Tkaczyk [Tue, 27 Aug 2024 12:56:57 +0000 (14:56 +0200)]
monitor: Add DS_EXTERNAL_BB flag
If this is set, then metadata handler must support external badblocks.
Remove checks for superswitch functions. If mdi->state_fd is not set
then we should not try to record badblock, we cannot trust this device.
Mariusz Tkaczyk [Mon, 7 Oct 2024 09:45:46 +0000 (11:45 +0200)]
sysfs: add sysfs_open_memb_attr()
Function is added to not repeat defining "dev-%s", disk_name.
Related code branches are updated. Ioctl way for setting disk
faulty/remove is removed, sysfs is always used now.
Some non functional style issues are fixed in Manage_subdevs().
Kinga Stefaniuk [Wed, 9 Oct 2024 06:48:20 +0000 (08:48 +0200)]
util: use only /dev directory in open_dev()
Previously, open_dev() tried to open device in two ways - using /dev and
/tmp directory. This method could be used by users which have no access
to /tmp directory (e.g. udev) and dev_open() fails which may affect many
processes. Remove try to open in /tmp directory.
Operating system vendors are customizing mdmonitor service beacause
the default form is not satifying for them (expect SUSE). As a result,
support is complicated (maintainers have to check the system) and man page
is not detailed.
I propose to abandon custom configuration files via sysconfig and keep
it inside mdadm.conf only.
Detailed comment in service for OSV maintainers is added to help with
transition.
Move memory declaration helpers outside mdadm.h. They seems to be
useful so keep them but include separatelly. Rework them to not reffer
to Name[] declared internally in mdadm/mdmon.
Anna Sztukowska [Tue, 3 Sep 2024 11:01:04 +0000 (13:01 +0200)]
Mdmonitor: Fix startup with missing directory
Commit 0a07dea8d3b78 ("Mdmonitor: Refactor check_one_sharer() for
better error handling") introduced an issue, if directory /run/mdadm
is missing, monitor fails to start. Move the directory creation
earlier to ensure it is always created.
Signed-off-by: Anna Sztukowska <anna.sztukowska@intel.com>
Proposed function sysfs_wrte_descriptor() unifies error handling for
write() done to sysfs files. Main purpose is to use it with MD sysfs
file but it can be used elsewhere.
Xiao Ni [Wed, 11 Sep 2024 08:54:28 +0000 (16:54 +0800)]
mdadm/tests: 07changelevels fix
There are five changes to this case.
1. remove testdev check. It can't work anymore and check if it's a
block device directly.
2. It can't change level and chunk size at the same time
3. Sleep more than 10s before check wait.
The test devices are small. Sometimes it can finish so quickly once
the reshape just starts. mdadm will be stuck before it waits reshape
to start. So the sync speed is limited. And it restores the sync speed
when it waits reshape to finish. It's good for case without backup
file.
It uses systemd service mdadm-grow-continue to monitor reshape
progress when specifying backup file. If reshape finishes so quickly
before it starts monitoring reshape progress, the daemon will be stuck
too. Because reshape_progress is 0 which means the reshape hasn't been
started. So give more time to let service can get right information
from kernel space.
But before getting these information. It needs to suspend array. At
the same time the reshape is running. The kernel reshape daemon will
update metadata 10s. So it needs to limit the sync speed more than 10s
before restoring sync speed. Then systemd service can suspend array
and start monitoring reshape progress.
4. Wait until mdadm-grow-continue service exits
mdadm --wait doesn't wait systemd service. For the case that needs
backup file, systemd service deletes the backup file after reshape
finishes. In this test case, it runs next case when reshape finishes.
And it fails because it can't create backup file because the backup
file exits.
5. Don't reshape from raid5 to raid1. It can't work now.
Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Xiao Ni [Wed, 11 Sep 2024 08:54:27 +0000 (16:54 +0800)]
mdadm/tests: wait until level changes
check wait waits reshape finishes, but it doesn't wait level changes.
The level change happens in a forked child progress. So we need to
search the child progress and monitor it.
Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Xiao Ni [Wed, 11 Sep 2024 08:54:26 +0000 (16:54 +0800)]
mdadm/Grow: sleep a while after removing disk in impose_level
It needs to remove disks when reshaping from raid456 to raid0. In
kernel space it sets MD_RECOVERY_RUNNING. And it will fail to change
level. So wait sometime to let md thread to clear this flag.
This is found by test case 05r6tor0.
Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Xiao Ni [Wed, 11 Sep 2024 08:54:24 +0000 (16:54 +0800)]
mdadm/Grow: Update reshape_progress to need_back after reshape finishes
It tries to update data offset when kicking off reshape. If it can't
change data offset, it needs to use child_monitor to monitor reshape
progress and do back up job. And it needs to update reshape_progress
to need_back when reshape finishes. If not, it will be in a infinite
loop.
Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Xiao Ni [Wed, 11 Sep 2024 08:54:23 +0000 (16:54 +0800)]
mdadm/Grow: Update new level when starting reshape
Reshape needs to specify a backup file when it can't update data offset
of member disks. For this situation, first, it starts reshape and then
it kicks off mdadm-grow-continue service which does backup job and
monitors the reshape process. The service is a new process, so it needs
to read superblock from member disks to get information.
But in the first step, it doesn't update new level in superblock. So
it can't change level after reshape finishes, because the new level is
not right. So records the new level in the first step.
Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Mariusz Tkaczyk [Tue, 25 Jun 2024 10:53:46 +0000 (12:53 +0200)]
Incremental: support devnode in IncrementalRemove.
There are no reasons to keep this interface different than others.
Allow to use devnode but keep old way for backward compatibility.
Method is added to verify that only devnode or kernel name is used.
Anna Sztukowska [Thu, 8 Aug 2024 15:02:38 +0000 (17:02 +0200)]
Examine.c: Fix memory leaks in Examine()
Fix memory leaks in Examine() reported by SAST analysis. Implement a
method to traverse and free all the nodes of the doubly linked list.
Replace for loop with while loop in order to improve redability of the
code and free allocated memory correctly.
Signed-off-by: Anna Sztukowska <anna.sztukowska@intel.com>
If reshape (eg. chunksize migration) is gracefully stopped via SIGTERM
the checkpoint is not saved and reshape cannot be resumed due to "data
being present in copy area". This is because UNIT_SRC_NORMAL isn't set
if SIGTERM occurred.
Move SIGTERM handling at the end of the loop to allow saving checkpoint
(and state) so reshapes can be properly resumed.
mdadm: Increase number limit in md device name to 1024.
Updated the maximum device number in md device names from 127 to 1024.
The previous limit was causing issues in the automation framework.
This change ensures backward compatibility and allows for future
scalability.
Mariusz Tkaczyk [Thu, 22 Aug 2024 10:18:06 +0000 (12:18 +0200)]
imsm: add IMSM_OROM_CAPABILITIES_TPV to nvme orom
Add it to avoid excluding. It has some value for users even if it is
always true for nvme virtual orom.
Rework detail-platform printing code, move printing 3rd party nvmes
to print_imsm_capability (as it should be), but keep it meaningful
only for nvme controllers (NVME and VMD hba types). Pass whole
orom_entry instead of orom there.
Squash code responsible for printing NVME and VMD hbas.
Mariusz Tkaczyk [Thu, 8 Aug 2024 11:07:50 +0000 (13:07 +0200)]
imsm: get bus from VMD driver directory
Enumeration of VMD child devices is started early, kernel is not waiting
for VMD enumeration to finish. It causes that:
/sys/bus/pci/drivers/vmd/{dev}/domain/device link might be not yet ready.
With PCI gen5 devices we can observe that mdadm is failing to start IMSM
raid arrays because of that. In that case, it needs to find bus path
manually.
Look for bus device in VMD driver directory if realpath() failed with
ENOENT.
EFI vars depends on userspace, they need to be mounted to be accessible.
Sporadic problems have been observed with availability at an early
assemble stage. It is not possible to fully synchronize EFI vars mounts
with udev rules processing.
For the reason above, read of IMSM OROM from ACPI tables as secondary
option is added. This method will be used for SATA and VMD family
controllers.
ACPI tables are generated by sysfs, earlier in the boot process, before
the stage of RAID assembly. The way of loading OROM via EFI vars is
retained, ACPI tables will be a backup way.
Two paths will be maintained, because IMSM hardware capabilities are
necessary for RAID assembly during booting, so access to them must be
provided.
Nigel Croxon [Wed, 7 Aug 2024 15:33:23 +0000 (11:33 -0400)]
mdadm: util.c fix coverity issues
Fixing the following coding errors the coverity tools found:
* Event check_return: Calling "open" without checking return value
* Event check_return: Calling "lseek(fd, sector_size, 0)" without
checking return value.
* Event leaked_handle: Handle variable "fd" going out of scope leaks
the handle.
* Event leaked_storage: Variable "dir" going out of scope leaks the
storage it points to.
* Event fixed_size_dest: You might overrun the 32-character fixed-size
string "st->devnm" by copying "_devnm" without checking the length.
* Event fixed_size_dest: You might overrun the 32-character fixed-size
string "container" by copying "dev" without checking the length.
Mariusz Tkaczyk [Tue, 6 Aug 2024 14:11:18 +0000 (16:11 +0200)]
mdstat: fix list detach issues
Move ent = ent->next; to while. It was outside the loop so if there
are more than 2 elements and we are looking for 3rd element it causes
infinite loop..
Fix el->next zeroing. It causes segfault in mdstat_free(). Theses
issues were not visible in my testing because I had only 2 MD devices.
Grow_reshape: set only component_size for size grow
Component_size couldn't be set using ioctl when new drive size is big
(e.g. 5TB). Command value is bigger than 32 bits and error is reported
- it is known ioctl limitation. Remove updating array properties using
ioctl, use sysfs instead. Sysfs was introduced in 3.10, so now it is old
enough to be safely used. Array_size in sysfs should be set for every
size change for external metadata, when grow is performed without
errors.
Add new released gcc to compilation test during GH action.
Change runner to Ubuntu 24.04 which supports gcc versions up to 14.
Previously ubuntu-latest was used (22.04) which didn't support gcc 13
and 14. Add verification if correct gcc was installed during test.
Kinga Stefaniuk [Tue, 6 Aug 2024 09:14:02 +0000 (11:14 +0200)]
super-intel: fix compilation error
Fix compilation error:
super-intel.c: In function ‘end_migration’:
super-intel.c:4360:29: error: writing 2 bytes into a region
of size 0 [-Werror=stringop-overflow=]
4360 | dev->vol.migr_state = 0;
| ~~~~~~~~~~~~~~~~~~~~^~~
cc1: note: destination object is likely at address zero
cc1: all warnings being treated as errors
make: *** [Makefile:232: super-intel.o] Error 1
reported, when GCC 14 is used. Return when dev is NULL, to avoid it.
Anna Sztukowska [Thu, 11 Jul 2024 12:31:57 +0000 (14:31 +0200)]
policy.c: Fix check_return issue in Write_rules()
Refactor Write_rules() in policy.c to eliminate check_return issue found
by SAST analysis. Create udev rules file directly using rule_name
instead of creating temporary file and renaming it.
Signed-off-by: Anna Sztukowska <anna.sztukowska@intel.com>
- add imsm_chunk_ops struct for better code readability,
- move chunk size mapping to string into array,
- add function to print supported chunk sizes by IMSM controller.
To avoid repeating mdstat_read() in IncrementalRemove(), new function
mdstat_find_by_member_name() has been proposed. With that,
IncrementalRemove() handles own copy of mdstat content and there is no
need to repeat reading for external stop.
Additionally, It proposed few helper to avoid repeating
mdstat_ent->metadata_version checks across code.
It is essential to avoid vulnerabilities in code as much
as possible using safe compilation flags. It is easier if
they are added to the Makefile and applied during compilation.
Add new gcc flags and make them configurable, because they
may not be supported for some compilers.
Set FORTIFY_SOURCE with the highest supported value for platform.
super0: use define for char array in examine_super0
Using nb with 11 length may cause format-truncation errors,
because it was possible to use snprintf with 12 length input
and write it to 11 length output. Added new define and use it
to avoid this error.
Based on documentation SCSI Primary Commands - 4 (SPC-4) only first 7 bits
of first byte in sense data are used to store response code. The current
verification uses all 8 bits for comparison of response code.
Incorrect verification may make impossible to use SATA disks with IMSM,
because IMSM requires verification of the encryption state before use.
There was issue in kernel libata [1]. This issue hides bug in mdadm because
last bit was not set.
Example output with affected mdadm:
Port3 : /dev/sde (BTPR212503EK120LGN)
mdadm: Failed ata passthrough12 ioctl. Device: /dev/sde.
mdadm: Failed to get drive encryption information
The fix is use the first 7 bits of Byte 0, to compare with the expected
values.
Mentioned commit (see Fixes) causes that devices with UUID
equal to uuid_zero was not recognized properly. For few devices
the first one was taken always, and the same information was
printed. It caused regression, when few containers were created,
symlinks were generated only for the first one.
Add checking if uuid is uuid_zero and, if yes, use devname to
differentiate devices.
GH action is using checkout plugin, which takes fetch-depth
as a parameter to specify number of commits to fetch. Setting it
to 0 to fetch all of the history of all branches and tags.
Do not allow to use '.' on first place for named MD device.
Having leading dot might be confusing, MD device cannot be hidden.
It also removes possibility to create md device with name '.'.
projects / thirdparty / mdadm.git / log
