midx: remove now-unused linked list of multi-pack indices
In the preceding commits we have migrated all users of the linked list
of multi-pack indices to instead use those stored in the object database
sources. Remove those now-unused pointers.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
packfile: stop using linked MIDX list in `get_all_packs()`
Refactor `get_all_packs()` so that we stop using the linked list of
multi-pack indices. Note that there is no need to explicitly prepare
alternates, and neither do we have to use `get_multi_pack_index()`,
because `prepare_packed_git()` already takes care of populating all data
structures for us.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
packfile: stop using linked MIDX list in `find_pack_entry()`
Refactor `find_pack_entry()` so that we stop using the linked list of
multi-pack indices. Note that there is no need to explicitly prepare
alternates, and neither do we have to use `get_multi_pack_index()`,
because `prepare_packed_git()` already takes care of populating all data
structures for us.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
packfile: refactor `get_multi_pack_index()` to work on sources
The function `get_multi_pack_index()` loads multi-pack indices via
`prepare_packed_git()` and then returns the linked list of multi-pack
indices that is stored in `struct object_database`. That list is in the
process of being removed though in favor of storing the MIDX as part of
the object database source it belongs to.
Refactor `get_multi_pack_index()` so that it returns the multi-pack
index for a single object source. Callers are now expected to call this
function for each source they are interested in. This requires them to
iterate through alternates, so we have to prepare alternate object
sources before doing so.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `close_midx()` we not only close the multi-pack index for
one object source, but instead we iterate through the whole linked list
of MIDXs to close all of them. This linked list is about to go away in
favor of using the new per-source pointer to its respective MIDX.
Refactor the function to iterate through sources instead.
Note that after this patch, there's a couple of callsites left that
continue to use `close_midx()` without iterating through all sources.
These are all cases where we don't care about the MIDX from other
sources though, so it's fine to keep them as-is.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
packfile: refactor `prepare_packed_git_one()` to work on sources
In the preceding commit we refactored how we load multi-pack indices to
take a corresponding "source" as input. As part of this refactoring we
started to store a pointer to the MIDX in `struct odb_source` itself.
Refactor loading of packfiles in the same way: instead of passing in the
object directory, we now pass in the source from which we want to load
packfiles. This allows us to simplify the code because we don't have to
search for a corresponding MIDX anymore, but we can instead directly use
the MIDX that we have already prepared beforehand.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multi-pack indices are tracked via `struct multi_pack_index`. This data
structure is stored as a linked list inside `struct object_database`,
which is the global database that spans across all of the object
sources.
This layout causes two problems:
- Object databases consist of multiple object sources (e.g. one source
per alternate object directory), where each multi-pack index is
specific to one of those sources. Regardless of that though, the
MIDX is not tracked per source, but tracked globally for the whole
object database. This creates a mismatch between the on-disk layout
and how things are organized in the object database subsystems and
makes some parts, like figuring out whether a source has an MIDX,
quite awkward.
- Multi-pack indices are an implementation detail of how efficient
access for packfiles work. As such, they are neither relevant in the
context of loose objects, nor in a potential future where we have
pluggable backends.
Refactor `prepare_multi_pack_index_one()` so that it works on a specific
source, which allows us to easily store a pointer to the multi-pack
index inside of it. For now, this pointer exists next to the existing
linked list we have in the object database. Users will be adjusted in
subsequent patches to instead use the per-source pointers.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 15 Jul 2025 19:06:57 +0000 (12:06 -0700)]
Merge branch 'tb/midx-avoid-cruft-packs' into ps/object-store-midx
* tb/midx-avoid-cruft-packs:
repack: exclude cruft pack(s) from the MIDX where possible
pack-objects: introduce '--stdin-packs=follow'
pack-objects: swap 'show_{object,commit}_pack_hint'
pack-objects: fix typo in 'show_object_pack_hint()'
pack-objects: perform name-hash traversal for unpacked objects
pack-objects: declare 'rev_info' for '--stdin-packs' earlier
pack-objects: factor out handling '--stdin-packs'
pack-objects: limit scope in 'add_object_entry_from_pack()'
pack-objects: use standard option incompatibility functions
Junio C Hamano [Wed, 9 Jul 2025 15:29:08 +0000 (08:29 -0700)]
Merge branch 'ps/object-store' into ps/object-store-midx
* ps/object-store:
odb: rename `read_object_with_reference()`
odb: rename `pretend_object_file()`
odb: rename `has_object()`
odb: rename `repo_read_object_file()`
odb: rename `oid_object_info()`
odb: trivial refactorings to get rid of `the_repository`
odb: get rid of `the_repository` when handling submodule sources
odb: get rid of `the_repository` when handling the primary source
odb: get rid of `the_repository` in `for_each()` functions
odb: get rid of `the_repository` when handling alternates
odb: get rid of `the_repository` in `odb_mkstemp()`
odb: get rid of `the_repository` in `assert_oid_type()`
odb: get rid of `the_repository` in `find_odb()`
odb: introduce parent pointers
object-store: rename files to "odb.{c,h}"
object-store: rename `object_directory` to `odb_source`
object-store: rename `raw_object_store` to `object_database`
Junio C Hamano [Tue, 8 Jul 2025 22:49:19 +0000 (15:49 -0700)]
Merge branch 'kn/fetch-push-bulk-ref-update'
"git push" and "git fetch" are taught to update refs in batches to
gain performance.
* kn/fetch-push-bulk-ref-update:
receive-pack: handle reference deletions separately
refs/files: skip updates with errors in batched updates
receive-pack: use batched reference updates
send-pack: fix memory leak around duplicate refs
fetch: use batched reference updates
refs: add function to translate errors to strings
In a recent security release, 05e9cd64ee (config: quote values
containing CR character, 2025-05-19) added calls to `git config get`,
`git config set`, and `git config unset` which are not present on the
maint-2.43 branch.
These subcommands were added in the following commits, released in
git-2.46.0:
Taylor Blau [Tue, 8 Jul 2025 18:47:50 +0000 (14:47 -0400)]
Documentation/RelNotes: use .adoc extension for new security releases
When preparing the latest round of security fixes, we wrote release
notes in v2.43.7, and then successively merged those up through to the
various 'maint' branches.
However, the 2.49 release series is the first to have commit 1f010d6bdf
(doc: use .adoc extension for AsciiDoc files, 2025-01-20). This means
that we should have renamed the new-but-historical release notes from
*.txt to *.adoc during the merge into the 'maint-2.49' branch, but
neglected to do so.
Rename them accordingly to match the convention introduced by 1f010d6bdf. Since the release materials in question here were prepared
before v2.50.0 was tagged, the 'maint' track for that release series is
OK as is.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 7 Jul 2025 21:12:55 +0000 (14:12 -0700)]
Merge branch 'jk/submodule-remote-lookup-cleanup'
Updating submodules from the upstream did not work well when
submodule's HEAD is detached, which has been improved.
* jk/submodule-remote-lookup-cleanup:
submodule: look up remotes by URL first
submodule: move get_default_remote_submodule()
submodule--helper: improve logic for fallback remote name
remote: remove the_repository from some functions
dir: move starts_with_dot(_dot)_slash to dir.h
remote: fix tear down of struct remote
remote: remove branch->merge_name and fix branch_release()
Junio C Hamano [Wed, 2 Jul 2025 19:08:04 +0000 (12:08 -0700)]
Merge branch 'ag/imap-send-resurrection'
"git imap-send" has been broken for a long time, which has been
resurrected and then taught to talk OAuth2.0 etc.
* ag/imap-send-resurrection:
imap-send: fix minor mistakes in the logs
imap-send: display the destination mailbox when sending a message
imap-send: display port alongwith host when git credential is invoked
imap-send: add ability to list the available folders
imap-send: enable specifying the folder using the command line
imap-send: add PLAIN authentication method to OpenSSL
imap-send: add support for OAuth2.0 authentication
imap-send: gracefully fail if CRAM-MD5 authentication is requested without OpenSSL
imap-send: fix memory leak in case auth_cram_md5 fails
imap-send: fix bug causing cfg->folder being set to NULL
Rename `read_object_with_reference()` to `odb_read_object_peeled()` to
match other functions related to the object database and our modern
coding guidelines. Furthermore though, the old name didn't really
describe very well what this function actually does, which is to walk
down any commit and tag objects until an object of the required type has
been found. This is generally referred to as "peeling", so the new name
should be way more descriptive.
No compatibility wrapper is introduced as the function is not used a lot
throughout our codebase.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
odb: trivial refactorings to get rid of `the_repository`
All of the external functions provided by the object database subsystem
don't depend on `the_repository` anymore, but some internal functions
still do. Refactor those cases by plumbing through the repository that
owns the object database.
This change allows us to get rid of the `USE_THE_REPOSITORY_VARIABLE`
preprocessor define.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
odb: get rid of `the_repository` when handling submodule sources
The "--recursive" flag for git-grep(1) allows users to grep for a string
across submodule boundaries. To make this work we add each submodule's
object sources to our own object database so that the objects can be
accessed directly.
The infrastructure for this depends on a global string list of submodule
paths. The caller is expected to call `add_submodule_odb_by_path()` for
each source and the object database will then eventually register all
submodule sources via `do_oid_object_info_extended()` in case it isn't
able to look up a specific object.
This reliance on global state is of course suboptimal with regards to
our libification efforts.
Refactor the logic so that the list of submodule sources is instead
tracked in the object database itself. This allows us to lose the
condition of `r == the_repository` before registering submodule sources
as we only ever add submodule sources to `the_repository` anyway. As
such, behaviour before and after this refactoring should always be the
same.
Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
odb: get rid of `the_repository` when handling the primary source
The functions `set_temporary_primary_odb()` and `restore_primary_odb()`
are responsible for managing a temporary primary source for the
database. Both of these functions implicitly rely on `the_repository`.
Refactor them to instead take an explicit object database parameter as
argument and adjust callers. Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
odb: get rid of `the_repository` in `for_each()` functions
There are a couple of iterator-style functions that execute a callback
for each instance of a given set, all of which currently depend on
`the_repository`. Refactor them to instead take an object database as
parameter so that we can get rid of this dependency.
Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
odb: get rid of `the_repository` when handling alternates
The functions to manage alternates all depend on `the_repository`.
Refactor them to accept an object database as a parameter and adjust all
callers. The functions are renamed accordingly.
Note that right now the situation is still somewhat weird because we end
up using the object store path provided by the object store's repository
anyway. Consequently, we could have instead passed in a pointer to the
repository instead of passing in the pointer to the object store. This
will be addressed in subsequent commits though, where we will start to
use the path owned by the object store itself.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of our dependency on `the_repository` in `find_odb()` by passing
in the object database in which we want to search for the source and
adjusting all callers.
Rename the function to `odb_find_source()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In subsequent commits we'll get rid of our use of `the_repository` in
"odb.c" in favor of explicitly passing in a `struct object_database` or
a `struct odb_source`. In some cases though we'll need access to the
repository, for example to read a config value from it, but we don't
have a way to access the repository owning a specific object database.
Introduce parent pointers for `struct object_database` to its owning
repository as well as for `struct odb_source` to its owning object
database, which will allow us to adapt those use cases.
Note that this change requires us to pass through the object database to
`link_alt_odb_entry()` so that we can set up the parent pointers for any
source there. The callchain is adapted to pass through the object
database accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-store: rename `object_directory` to `odb_source`
The `object_directory` structure is used as an access point for a single
object directory like ".git/objects". While the structure isn't yet
fully self-contained, the intent is for it to eventually contain all
information required to access objects in one specific location.
While the name "object directory" is a good fit for now, this will
change over time as we continue with the agenda to make pluggable object
databases a thing. Eventually, objects may not be accessed via any kind
of directory at all anymore, but they could instead be backed by any
kind of durable storage mechanism. While it seems quite far-fetched for
now, it is thinkable that eventually this might even be some form of a
database, for example.
As such, the current name of this structure will become worse over time
as we evolve into the direction of pluggable ODBs. Immediate next steps
will start to carve out proper self-contained object directories, which
requires us to pass in these object directories as parameters. Based on
our modern naming schema this means that those functions should then be
named after their subsystem, which means that we would start to bake the
current name into the codebase more and more.
Let's preempt this by renaming the structure. There have been a couple
alternatives that were discussed:
- `odb_backend` was discarded because it led to the association that
one object database has a single backend, but the model is that one
alternate has one backend. Furthermore, "backend" is more about the
actual backing implementation and less about the high-level concept.
- `odb_alternate` was discarded because it is a bit of a stretch to
also call the main object directory an "alternate".
Instead, pick `odb_source` as the new name. It makes it sufficiently
clear that there can be multiple sources and does not cause confusion
when mixed with the already-existing "alternate" terminology.
In the future, this change allows us to easily introduce for example a
`odb_files_source` and other format-specific implementations.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-store: rename `raw_object_store` to `object_database`
The `raw_object_store` structure is the central entry point for reading
and writing objects in a repository. The main purpose of this structure
is to manage object directories and provide an interface to access and
write objects in those object directories.
Right now, many of the functions associated with the raw object store
implicitly rely on `the_repository` to get access to its `objects`
pointer, which is the `raw_object_store`. As we want to generally get
rid of using `the_repository` across our codebase we will have to
convert this implicit dependency on this global variable into an
explicit parameter.
This conversion can be done by simply passing in an explicit pointer to
a repository and then using its `->objects` pointer. But there is a
second effort underway, which is to make the object subsystem more
selfcontained so that we can eventually have pluggable object backends.
As such, passing in a repository wouldn't make a ton of sense, and the
goal is to convert the object store interfaces such that we always pass
in a reference to the `raw_object_store` instead.
This will expose the `raw_object_store` type to a lot more callers
though, which surfaces that this type is named somewhat awkwardly. The
"raw_" prefix makes readers wonder whether there is a non-raw variant of
the object store, but there isn't. Furthermore, we nowadays want to name
functions in a way that they can be clearly attributed to a specific
subsystem, but calling them e.g. `raw_object_store_has_object()` is just
too unwieldy, even when dropping the "raw_" prefix.
Instead, rename the structure to `object_database`. This term is already
used a lot throughout our codebase, and it cannot easily be mistaken for
"object directories", either. Furthermore, its acronym ODB is already
well-known and works well as part of a function's name, like for example
`odb_has_object()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 1 Jul 2025 21:17:25 +0000 (14:17 -0700)]
send-pack: clean-up even when taking an early exit
Previous commit has plugged one leak in the normal code path, but
there is an early exit that leaves without releasing any resources
acquired in the function.
FreeBSD 13.4 is no longer supported, and 13.5 will be the last
release from that series, so jump instead to 14.3 which should
be supported for another 10 months and will be at that point
the oldest supported release with the interim release of 15.
While at it, move some variables to the environment and make
sure to skip a git grep test that assumes glibc regex.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 30 Jun 2025 21:30:31 +0000 (14:30 -0700)]
Merge branch 'jc/merge-compact-summary'
"git merge/pull" has been taught the "--compact-summary" option to
use the compact-summary format, intead of diffstat, when showing
the summary of the incoming changes.
* jc/merge-compact-summary:
merge/pull: extend merge.stat configuration variable to cover --compact-summary
merge/pull: add the "--compact-summary" option
Junio C Hamano [Mon, 30 Jun 2025 21:30:30 +0000 (14:30 -0700)]
Merge branch 'bc/stash-export-import'
An interchange format for stash entries is defined, and subcommand
of "git stash" to import/export has been added.
* bc/stash-export-import:
builtin/stash: provide a way to import stashes from a ref
builtin/stash: provide a way to export stashes to a ref
builtin/stash: factor out revision parsing into a function
object-name: make get_oid quietly return an error
Junio C Hamano [Mon, 30 Jun 2025 21:30:30 +0000 (14:30 -0700)]
Merge branch 'jc/cocci-avoid-regexp-constraint'
Avoid regexp_constraint and instead use comparison_constraint when
listing functions to exclude from application of coccinelle rules,
as spatch can be built with different regexp engine X-<.
daemon: correctly handle soft accept() errors in service_loop
Since df076bdbcc ([PATCH] GIT: Listen on IPv6 as well, if available.,
2005-07-23), the original error checking was included in an inner loop
unchanged, where its effect was different.
Instead of retrying, after a EINTR during accept() in the listening
socket, it will advance to the next one and try with that instead,
leaving the client waiting for another round.
Make sure to retry with the same listener socket that failed originally.
To avoid an unlikely busy loop, fallback to the old behaviour after a
couple of attempts.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Fri, 27 Jun 2025 22:09:04 +0000 (15:09 -0700)]
send-pack: clean up extra_have oid array
Commit c8009635785e ("fetch-pack, send-pack: clean up shallow oid
array", 2024-09-25) cleaned up the shallow oid array in cmd_send_pack,
but didn't clean up extra_have, which is still leaked at program exit.
I suspect the particular tests in t5539 don't trigger any additions to
the extra_have array, which explains why the tests can pass leak free
despite this gap.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
daemon: remove unnecesary restriction for listener fd
Since df076bdbcc ([PATCH] GIT: Listen on IPv6 as well, if available.,
2005-07-23), any file descriptor assigned to a listening socket was
validated to be within the range to be used in an FDSET later.
6573faff34 (NO_IPV6 support for git daemon, 2005-09-28), moves to
use poll() instead of select(), that doesn't have that restriction,
so remove the original check.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Acked-by: Phillip Wood <phillip.wood123@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 25 Jun 2025 21:07:36 +0000 (14:07 -0700)]
Merge branch 'ps/maintenance-ref-lock'
"git maintenance" lacked the care "git gc" had to avoid holding
onto the repository lock for too long during packing refs, which
has been remedied.
* ps/maintenance-ref-lock:
builtin/maintenance: fix locking race when handling "gc" task
builtin/gc: avoid global state in `gc_before_repack()`
usage: allow dying without writing an error message
builtin/maintenance: fix locking race with refs and reflogs tasks
builtin/maintenance: split into foreground and background tasks
builtin/maintenance: fix typedef for function pointers
builtin/maintenance: extract function to run tasks
builtin/maintenance: stop modifying global array of tasks
builtin/maintenance: mark "--task=" and "--schedule=" as incompatible
builtin/maintenance: centralize configuration of explicit tasks
builtin/gc: drop redundant local variable
builtin/gc: use designated field initializers for maintenance tasks
Junio C Hamano [Wed, 25 Jun 2025 21:07:35 +0000 (14:07 -0700)]
Merge branch 'jc/you-still-use-whatchanged'
"git whatchanged" that is longer to type than "git log --raw"
which is its modern rough equivalent has outlived its usefulness
more than 10 years ago. Plan to deprecate and remove it.
* jc/you-still-use-whatchanged:
whatschanged: list it in BreakingChanges document
whatchanged: remove when built with WITH_BREAKING_CHANGES
whatchanged: require --i-still-use-this
tests: prepare for a world without whatchanged
doc: prepare for a world without whatchanged
you-still-use-that??: help deprecating commands for removal
In 9d2962a7c4 (receive-pack: use batched reference updates, 2025-05-19)
we updated the 'git-receive-pack(1)' command to use batched reference
updates. One edge case which was missed during this implementation was
when a user pushes multiple branches such as:
Before using batched updates, the references would be applied
sequentially and hence no conflicts would arise. With batched updates,
while the first update applies, the second fails due to D/F conflict. A
similar issue was present in 'git-fetch(1)' and was fixed by separating
out reference pruning into a separate transaction in the commit 'fetch:
use batched reference updates'. Apply a similar mechanism for
'git-receive-pack(1)' and separate out reference deletions into its own
batch.
This means 'git-receive-pack(1)' will now use up to two transactions,
whereas before using batched updates it would use _at least_ two
transactions. So using batched updates is still the better option.
Add a test to validate this behavior.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Fri, 20 Jun 2025 07:15:44 +0000 (09:15 +0200)]
refs/files: skip updates with errors in batched updates
The commit 23fc8e4f61 (refs: implement batch reference update support,
2025-04-08) introduced support for batched reference updates. This
allows users to batch updates together, while allowing some of the
updates to fail.
Under the hood, batched updates use the reference transaction mechanism.
Each update which fails is marked as such. Any failed updates must be
skipped over in the rest of the code, as they wouldn't apply any more.
In two of the loops within 'files_transaction_finish()' of the files
backend, the failed updates aren't skipped over. This can cause a
SEGFAULT otherwise. Add the missing skips and a test to validate the
same.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 24 Jun 2025 16:48:51 +0000 (09:48 -0700)]
Merge branch 'sa/multi-mailmap-fix'
When asking to apply mailmap to both author and committer field
while showing a commit object, the field that appears later was not
correctly parsed and replaced, which has been corrected.
* sa/multi-mailmap-fix:
cat-file: fix mailmap application for different author and committer
Junio C Hamano [Tue, 24 Jun 2025 16:48:47 +0000 (09:48 -0700)]
Merge branch 'ag/send-email-edit-threading-fix'
"git send-email" incremented its internal message counter when a
message was edited, which made logic that treats the first message
specially misbehave, which has been corrected.
* ag/send-email-edit-threading-fix:
send-email: show the new message id assigned by outlook in the logs
send-email: fix bug resulting in broken threads if a message is edited
Jeff King [Mon, 23 Jun 2025 10:56:25 +0000 (06:56 -0400)]
test-lib: teach test_seq the -f option
The "seq" tool has a "-f" option to produce printf-style formatted
lines. Let's teach our test_seq helper the same trick. This lets us get
rid of some shell loops in test snippets (which are particularly verbose
in our test suite because we have to "|| return 1" to keep the &&-chain
going).
This converts a few call-sites I found by grepping around the test
suite. A few notes on these:
- In "seq", the format specifier is a "%g" float. Since test_seq only
supports integers, I've kept the more natural "%d" (which is what
these call sites were using already).
- Like "seq", test_seq automatically adds a newline to the specified
format. This is what all callers are doing already except for t0021,
but there we do not care about the exact format. We are just trying
to printf a large number of bytes to a file. It's not worth
complicating other callers or adding an option to avoid the newline
in that caller.
- Most conversions are just replacing a shell loop (which does get rid
of an extra fork, since $() requires a subshell). In t0612 we can
replace an awk invocation, which I think makes the end result more
readable, as there's less quoting.
- In t7422 we can replace one loop, but sadly we have to leave the
loop directly above it. This is because that earlier loop wants to
include the seq value twice in the output, which test_seq does not
support (nor does regular seq). If you run:
test_seq -f "foo-%d %d" 10
the second "%d" will always be the empty string. You might naively
think that test_seq could add some extra arguments, like:
# 3 ought to be enough for anyone...
printf "$fmt\n" "$i "$i" $i"
but that just triggers printf to format multiple lines, one per
extra set of arguments.
So we'd have to actually parse the format string, figure out how
many "%" placeholders are there, and then feed it that many
instances of the sequence number. The complexity isn't worth it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Mon, 23 Jun 2025 23:11:35 +0000 (16:11 -0700)]
submodule: look up remotes by URL first
The get_default_remote_submodule() function performs a lookup to find
the appropriate remote to use within a submodule. The function first
checks to see if it can find the remote for the current branch. If this
fails, it then checks to see if there is exactly one remote. It will use
this, before finally falling back to "origin" as the default.
If a user happens to rename their default remote from origin, either
manually or by setting something like clone.defaultRemoteName, this
fallback will not work.
In such cases, the submodule logic will try to use a non-existent
remote. This usually manifests as a failure to trigger the submodule
update.
The parent project already knows and stores the submodule URL in either
.gitmodules or its .git/config.
Add a new repo_remote_from_url() helper which will iterate over all the
remotes in a repository and return the first remote which has a matching
URL.
Refactor get_default_remote_submodule to find the submodule and get its
URL. If a valid URL exists, first try to obtain a remote using the new
repo_remote_from_url(). Fall back to the repo_default_remote()
otherwise.
The fallback logic is kept in case for some reason the user has manually
changed the URL within the submodule. Additionally, we still try to use
a remote rather than directly passing the URL in the
fetch_in_submodule() logic. This ensures that an update will properly
update the remote refs within the submodule as expected, rather than
just fetching into FETCH_HEAD.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Mon, 23 Jun 2025 23:11:33 +0000 (16:11 -0700)]
submodule--helper: improve logic for fallback remote name
The repo_get_default_remote() function in submodule--helper currently
tries to figure out the proper remote name to use for a submodule based
on a few factors.
First, it tries to find the remote for the currently checked out branch.
This works if the submodule is configured to checkout to a branch
instead of a detached HEAD state.
In the detached HEAD state, the code calls back to using "origin", on
the assumption that this is the default remote name. Some users may
change this, such as by setting clone.defaultRemoteName, or by changing
the remote name manually within the submodule repository.
As a first step to improving this situation, refactor to reuse the logic
from remotes_remote_for_branch(). This function uses the remote from the
branch if it has one. If it doesn't then it checks to see if there is
exactly one remote. It uses this remote first before attempting to fall
back to "origin".
To allow using this helper function, introduce a repo_default_remote()
helper to remote.c which takes a repository structure. This helper will
load the remote configuration and get the "HEAD" branch. Then it will
call remotes_remote_for_branch to find the default remote.
Replace calls of repo_get_default_remote() with the calls to this new
function. To maintain consistency with the existing callers, continue
copying the returned string with xstrdup.
This isn't a perfect solution for users who change remote names, but it
should help in cases where the remote name is changed but users haven't
added any additional remotes.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Mon, 23 Jun 2025 23:11:32 +0000 (16:11 -0700)]
remote: remove the_repository from some functions
The remotes_remote_get_1 (and its caller, remotes_remote_get, have an
implicit dependency on the_repository due to calling
read_branches_file() and read_remotes_file(), both of which use
the_repository. The branch_get() function calls set_merge() which has an
implicit dependency on the_repository as well.
Because of this use of the_repository, the helper functions cannot be
used in code paths which operate on other repositories. A future
refactor of the submodule--helper will want to make use of some of these
functions.
Refactor to break the dependency by passing struct repository *repo
instead of struct remote_state *remote_state in a few places.
The public callers and many other helper functions still depend on
the_repository. A repo-aware function will be exposed in a following
change for git submodule--helper.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Mon, 23 Jun 2025 23:11:31 +0000 (16:11 -0700)]
dir: move starts_with_dot(_dot)_slash to dir.h
Both submodule--helper.c and submodule-config.c have an implementation
of starts_with_dot_slash and starts_with_dot_dot_slash. The dir.h header
has starts_with_dot(_dot)_slash_native, which sets PATH_MATCH_NATIVE.
Move the helpers to dir.h as static inlines. I thought about renaming
them to postfix with _platform but that felt too long and ugly. On the
other hand it might be slightly confusing with _native.
This simplifies a submodule refactor which wants to use the helpers
earlier in the submodule--helper.c file.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Mon, 23 Jun 2025 23:11:30 +0000 (16:11 -0700)]
remote: fix tear down of struct remote
The remote_clear() function failed to free the remote->push and
remote->fetch refspec fields.
This should be caught by the leak sanitizer. However, for callers which
use ``the_repository``, the values never go out of scope and the
sanitizer doesn't complain.
A future change is going to add a caller of read_config() for a
submodule repository structure, which would result in the leak sanitizer
complaining.
Fix remote_clear(), updating it to properly call refspec_clear() for
both the push and fetch members.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Mon, 23 Jun 2025 23:11:29 +0000 (16:11 -0700)]
remote: remove branch->merge_name and fix branch_release()
The branch structure has both branch->merge_name and branch->merge for
tracking the merge information. The former is allocated by add_merge()
and stores the names read from the configuration file. The latter is
allocated by set_merge() which is called by branch_get() when an
external caller requests a branch.
This leads to the confusing situation where branch->merge_nr tracks both
the size of branch->merge (once its allocated) and branch->merge_name.
The branch_release() function incorrectly assumes that branch->merge is
always set when branch->merge_nr is non-zero, and can potentially crash
if read_config() is called without branch_get() being called on every
branch.
In addition, branch_release() fails to free some of the memory
associated with the structure including:
* Failure to free the refspec_item containers in branch->merge[i]
* Failure to free the strings in branch->merge_name[i]
* Failure to free the branch->merge_name parent array.
The set_merge() function sets branch->merge_nr to 0 when there is no
valid remote_name, to avoid external callers seeing a non-zero merge_nr
but a NULL merge array. This results in failure to release most of the
merge data as well.
These issues could be fixed directly, and indeed I initially proposed
such a change at [1] in the past. While this works, there was some
confusion during review because of the inconsistencies.
Instead, its time to clean up the situation properly. Remove
branch->merge_name entirely. Instead, allocate branch->merge earlier
within add_merge() instead of within set_merge(). Instead of having
set_merge() copy from merge_name[i] to merge[i]->src, just have
add_merge() directly initialize merge[i]->src.
Modify the add_merge() to call xstrdup() itself, instead of having
the caller of add_merge() do so. This makes it more obvious which code
owns the memory.
Update all callers which use branch->merge_name[i] to use
branch->merge[i]->src instead.
Add a merge_clear() function which properly releases all of the
merge-related memory, and which sets branch->merge_nr to zero. Use this
both in branch_release() and in set_merge(), fixing the leak when
set_merge() finds no valid remote_name.
Add a set_merge variable to the branch structure, which indicates
whether set_merge() has been called. This replaces the previous use of a
NULL check against the branch->merge array.
With these changes, the merge array is always allocated when merge_nr is
non-zero.
This use of refspec_item to store the names should be safe. External
callers should be using branch_get() to obtain a pointer to the branch,
which will call set_merge(), and the callers internal to remote.c
already handle the partially initialized refpsec_item structure safely.
This end result is cleaner, and avoids duplicating the merge names
twice.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Link: [1] https://lore.kernel.org/git/20250617-jk-submodule-helper-use-url-v2-1-04cbb003177d@gmail.com/ Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 23 Jun 2025 22:32:32 +0000 (18:32 -0400)]
repack: exclude cruft pack(s) from the MIDX where possible
In ddee3703b3 (builtin/repack.c: add cruft packs to MIDX during
geometric repack, 2022-05-20), repack began adding cruft pack(s) to the
MIDX with '--write-midx' to ensure that the resulting MIDX was always
closed under reachability in order to generate reachability bitmaps.
While the previous patch added the '--stdin-packs=follow' option to
pack-objects, it is not yet on by default. Given that, suppose you have
a once-unreachable object packed in a cruft pack, which later becomes
reachable from one or more objects in a geometrically repacked pack.
That once-unreachable object *won't* appear in the new pack, since the
cruft pack was not specified as included or excluded when the
geometrically repacked pack was created with 'pack-objects
--stdin-packs' (*not* '--stdin-packs=follow', which is not on). If that
new pack is included in a MIDX without the cruft pack, then trying to
generate bitmaps for that MIDX may fail. This happens when the bitmap
selection process picks one or more commits which reach the
once-unreachable objects.
To mitigate this failure mode, commit ddee3703b3 ensures that the MIDX
will be closed under reachability by including cruft pack(s). If cruft
pack(s) were not included, we would fail to generate a MIDX bitmap. But ddee3703b3 alludes to the fact that this is sub-optimal by saying
[...] it's desirable to avoid including cruft packs in the MIDX
because it causes the MIDX to store a bunch of objects which are
likely to get thrown away.
, which is true, but hides an even larger problem. If repositories
rarely prune their unreachable objects and/or have many of them, the
MIDX must keep track of a large number of objects which bloats the MIDX
and slows down object lookup.
This is doubly unfortunate because the vast majority of objects in cruft
pack(s) are unlikely to be read. But any object lookups that go through
the MIDX must binary search over them anyway, slowing down object
lookups using the MIDX.
This patch causes geometrically-repacked packs to contain a copy of any
once-unreachable object(s) with 'git pack-objects --stdin-packs=follow',
allowing us to avoid including any cruft packs in the MIDX. This is
because a sequence of geometrically-repacked packs that were all
generated with '--stdin-packs=follow' are guaranteed to have their union
be closed under reachability.
Note that you cannot guarantee that a collection of packs is closed
under reachability if not all of them were generated with "following" as
above. One tell-tale sign that not all geometrically-repacked packs in
the MIDX were generated with "following" is to see if there is a pack in
the existing MIDX that is not going to be somehow represented (either
verbatim or as part of a geometric rollup) in the new MIDX.
If there is, then starting to generate packs with "following" during
geometric repacking won't work, since it's open to the same race as
described above.
But if you're starting from scratch (e.g., building the first MIDX after
an all-into-one '--cruft' repack), then you can guarantee that the union
of subsequently generated packs from geometric repacking *is* closed
under reachability.
(One exception here is when "starting from scratch" results in a noop
repack, e.g., because the non-cruft pack(s) in a repository already form
a geometric progression. Since we can't tell whether or not those were
generated with '--stdin-packs=follow', they may depend on
once-unreachable objects, so we have to include the cruft pack in the
MIDX in this case.)
Detect when this is the case and avoid including cruft packs in the MIDX
where possible. The existing behavior remains the default, and the new
behavior is available with the config 'repack.midxMustIncludeCruft' set
to 'false'.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 23 Jun 2025 22:32:30 +0000 (18:32 -0400)]
pack-objects: introduce '--stdin-packs=follow'
When invoked with '--stdin-packs', pack-objects will generate a pack
which contains the objects found in the "included" packs, less any
objects from "excluded" packs.
Packs that exist in the repository but weren't specified as either
included or excluded are in practice treated like the latter, at least
in the sense that pack-objects won't include objects from those packs.
This behavior forces us to include any cruft pack(s) in a repository's
multi-pack index for the reasons described in ddee3703b3
(builtin/repack.c: add cruft packs to MIDX during geometric repack,
2022-05-20).
The full details are in ddee3703b3, but the gist is if you
have a once-unreachable object in a cruft pack which later becomes
reachable via one or more commits in a pack generated with
'--stdin-packs', you *have* to include that object in the MIDX via the
copy in the cruft pack, otherwise we cannot generate reachability
bitmaps for any commits which reach that object.
Note that the traversal here is best-effort, similar to the existing
traversal which provides name-hash hints. This means that the object
traversal may hand us back a blob that does not actually exist. We
*won't* see missing trees/commits with 'ignore_missing_links' because:
- missing commit parents are discarded at the commit traversal stage by
revision.c::process_parents()
- missing tag objects are discarded by revision.c::handle_commit()
- missing tree objects are discarded by the list-objects code in
list-objects.c::process_tree()
But we have to handle potentially-missing blobs specially by making a
separate check to ensure they exist in the repository. Failing to do so
would mean that we'd add an object to the packing list which doesn't
actually exist, rendering us unable to write out the pack.
This prepares us for new repacking behavior which will "resurrect"
objects found in cruft or otherwise unspecified packs when generating
new packs. In the context of geometric repacking, this may be used to
maintain a sequence of geometrically-repacked packs, the union of which
is closed under reachability, even in the case described earlier.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
show_commit_pack_hint() has heretofore been a noop, so its position
within its compilation unit only needs to appear before its first use.
But the following commit will sometimes have `show_commit_pack_hint()`
call `show_object_pack_hint()`, so reorder the former to appear after
the latter to minimize the code movement in that patch.
Suggested-by: Elijah Newren <newren@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 23 Jun 2025 22:32:21 +0000 (18:32 -0400)]
pack-objects: perform name-hash traversal for unpacked objects
With '--unpacked', pack-objects adds loose objects (which don't appear
in any of the excluded packs from '--stdin-packs') to the output pack
without considering them as reachability tips for the name-hash
traversal.
This was an oversight in the original implementation of '--stdin-packs',
since the code which enumerates and adds loose objects to the output
pack (`add_unreachable_loose_objects()`) did not have access to the
'rev_info' struct found in `read_packs_list_from_stdin()`.
Excluding unpacked objects from that traversal doesn't affect the
correctness of the resulting pack, but it does make it harder to
discover good deltas for loose objects.
Now that the 'rev_info' struct is declared outside of
`read_packs_list_from_stdin()`, we can pass it to
`add_objects_in_unpacked_packs()` and add any loose objects as tips to
the above-mentioned traversal, in theory producing slightly tighter
packs as a result.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 23 Jun 2025 22:32:18 +0000 (18:32 -0400)]
pack-objects: declare 'rev_info' for '--stdin-packs' earlier
Once 'read_packs_list_from_stdin()' has called for_each_object_in_pack()
on each of the input packs, we do a reachability traversal to discover
names for any objects we picked up so we can generate name hash values
and hopefully get higher quality deltas as a result.
A future commit will change the purpose of this reachability traversal
to find and pack objects which are reachable from commits in the input
packs, but are packed in an unknown (not included nor excluded) pack.
Extract the code which initializes and performs the reachability
traversal to take place in the caller, not the callee, which prepares us
to share this code for the '--unpacked' case (see the function
add_unreachable_loose_objects() for more details).
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 23 Jun 2025 22:32:15 +0000 (18:32 -0400)]
pack-objects: factor out handling '--stdin-packs'
At the bottom of cmd_pack_objects() we check which mode the command is
running in (e.g., generating a cruft pack, handling '--stdin-packs',
using the internal rev-list, etc.) and handle the mode appropriately.
The '--stdin-packs' case is handled inline (dating back to its
introduction in 339bce27f4 (builtin/pack-objects.c: add '--stdin-packs'
option, 2021-02-22)) since it is relatively short. Extract the body of
"if (stdin_packs)" into its own function to prepare for the
implementation to become lengthier in a following commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 23 Jun 2025 22:32:13 +0000 (18:32 -0400)]
pack-objects: limit scope in 'add_object_entry_from_pack()'
In add_object_entry_from_pack() we declare 'revs' (given to us through
the miscellaneous context argument) earlier in the "if (p)" conditional
than is necessary. Move it down as far as it can go to reduce its
scope.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 23 Jun 2025 22:32:10 +0000 (18:32 -0400)]
pack-objects: use standard option incompatibility functions
pack-objects has a handful of explicit checks for pairs of command-line
options which are mutually incompatible. Many of these pre-date a699367bb8 (i18n: factorize more 'incompatible options' messages,
2022-01-31).
Convert the explicit checks into die_for_incompatible_opt2() calls,
which simplifies the implementation and standardizes pack-objects'
output when given incompatible options (e.g., --stdin-packs with
--filter gives different output than --keep-unreachable with
--unpack-unreachable).
There is one minor piece of test fallout in t5331 that expects the old
format, which has been corrected.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
So we are passing "$i" as an argument to be filled in, but there is no
"%" placeholder in the format string, which is a bit confusing to read.
We could switch both instances of "$i" to "%d" (and pass $i twice). But
that makes the line even longer. Let's just keep interpolating the value
in the string, and drop the confusing extra "$i" argument.
And since we are not using any printf specifiers at all, it becomes
clear that we can swap it out for echo. We do use a "\n" in the middle
of the string, but breaking this into two separate echo statements
actually makes it easier to read.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 18 Jun 2025 17:55:02 +0000 (10:55 -0700)]
cocci: matching (multiple) identifiers
"make coccicheck" seems to work OK at GitHub CI using
$ spatch --version
spatch version 1.1.1 compiled with OCaml version 4.13.1
OCaml scripting support: yes
Python scripting support: yes
Syntax of regular expressions: PCRE
but not with
$ spatch --version
spatch version 1.3 compiled with OCaml version 5.3.0
OCaml scripting support: yes
Python scripting support: yes
Syntax of regular expressions: Str
Judging from https://ocaml.org/manual/5.3/api/Str.html, I suspect
that this probably is caused by the distinction between BRE vs PCRE.
As there is no reasonably clean way to write the multiple choice
matches portably between these two pattern languages, let's stop
using regexp_constraint and use compare_constraint instead when
listing the function names to exclude.
There are other uses of "!~" but they all want to match a single
simple token, that should work fine either with BRE or PCRE.
projects / thirdparty / git.git / log
