When building out a systemd based image, the udev-hwdb postinstall
script always fails at rootfs time. This is because that the 'udevadm'
command used in udev-hwdb postinstall script is now in the udev
package and udev recommends udev-hwdb.
Instead of letting udev recommends udev-hwdb, we let systemd do it
and make udev-hwdb rdepend on udev.
The fetcher uses the rcleartool or cleartool remote client, depending on which one is available.
Supported SRC_URI options are:
- vob
(required) The name of the clearcase VOB (with prepending "/")
- module
The module in the selected VOB (with prepending "/")
The module and vob parameters are combined to create
the following load rule in the view config spec:
load <vob><module>
- proto
http or https
Related variables:
CCASE_CUSTOM_CONFIG_SPEC
Write a config spec to this variable in your recipe to use it instead
of the default config spec generated by this fetcher.
Please note that the SRCREV loses its functionality if you specify
this variable. SRCREV is still used to label the archive after a fetch,
but it doesn't define what's fetched.
User credentials:
When using cleartool:
The login of cleartool is handled by the system. No special steps needed.
When using rcleartool:
In order to use rcleartool with authenticated users an `rcleartool login` is
necessary before using the fetcher.
Richard Purdie [Mon, 21 Jul 2014 08:35:53 +0000 (09:35 +0100)]
bitbake: command/runqueue: Fix shutdown logic
If you hit Ctrl+C at the right point, the system processes the request
but merrily continues building. It turns out finish_runqueue() is called
but this doesn't stop the later generation and execution of the
runqueue.
This patch adjusts some of the conditionals to ensure the build really
does stop.
Scott Rifenbark [Mon, 7 Jul 2014 06:41:24 +0000 (09:41 +0300)]
ref-manuala: Updates to support links to BB manual
Discovered that the sed file was processing the bitbake-user-manual
just like the others, which was wrong. the BB manual is not included
in the mega-manual so the links there need to be left alone. The fix
included specially creating substitution lines to handle all the YP
docs while excluding the BB manual.
Otavio Salvador [Fri, 18 Jul 2014 16:47:06 +0000 (13:47 -0300)]
alsa-tools: Disable use of GTK+ when not using X11
The GTK+3 does not provide support for DirectFB backend so we cannot
enable GTK+ features of alsa-tools in this case; GTK+2 does not provide
support for Wayland.
This patch changes GTK+ support to be enabled only when X11 support is
enabled.
buildtools-tarball: Add wget to buildtools-tarball
GNU Wget cannot be upgrated to a newer that 1.12 version on supported
Centos distro. GNU Wget 1.12 and earlier uses a server-provided filename
instead of the original URL to determine the destination filename of a
download.
This means the files downloaded when fetching cannot be properly used:
$ wget http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz
$ ls
eventlog_0.2.13.tar.gz?AWSAccessKeyId=AKIAICTJ5MANGPMOH7JA&Expires=1400838672&Signature=TjakOBpOvHtEKKDgF14iVinWpY0=
This in turn lead to build errors like:
WARNING: Failed to fetch URL http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz, attempting MIRRORS if available
ERROR: Fetcher failure for URL: 'http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz'. The fetch command returned success for url http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz but /path/to/downloads/eventlog_0.2.13.tar.gz doesn't exist?!
ERROR: Function failed: Fetcher failure for URL: 'http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /path/to/tmp/work/ppce500v2-enea-linux-gnuspe/eventlog/0.2.13-r0/temp/log.do_fetch.28302
ERROR: Task 4 (/path/to/poky/meta-openembedded/meta-oe/recipes-support/eventlog/eventlog_0.2.13.bb, do_fetch) failed with exit code '1'
The so files installed by libomxil are not versioned and should
be installed without version-based symlinks so that omxregister-bellagio
can properly find and register them.
Robert Yang [Fri, 4 Jul 2014 05:39:04 +0000 (22:39 -0700)]
bitbake: bitbake: update help message for dump-signatures
The bitbake -S had been updated which always reuires an argument, so
update the help info:
- Add the two args in the help message: none and printdiff
- Use type="choice" so that we can get more friendly error messages,
for example:
bitbake: error: option -S: invalid choice: 'printdiffX' (choose from 'none', 'printdiff')
Scott Rifenbark [Thu, 10 Jul 2014 07:38:39 +0000 (10:38 +0300)]
bitbake: bitbake-user-manual-metadata.xml: KERNEL_FEATURES example updated.
I added text to separate this example code from the general
BitBake User Manual's spirit of standing alone and away from
YP or OE stuff. Also, added another space to move the examples
code so that 5 spaces are used for literal indentation.
Robert P. J. Day [Thu, 10 Jul 2014 07:23:32 +0000 (10:23 +0300)]
bitbake: bitbake-user-manual-metadata.xml: Added second conditional metadata example.
I think having a couple real-life examples here would make a huge
difference.
Comment from Scott: I modified the example description to indicate
that it is from an OpenEmbedded metadata-based recipe (i.e from
YP). We have been trying very hard to keep the BitBake User
Manual as separate as possible from the YP docs.
Peter Seebach [Fri, 18 Jul 2014 18:49:25 +0000 (13:49 -0500)]
pseudo: uprev to 1.6.1
Pseudo now automatically tries to shut down the server after running
single commands under pseudo ("pseudo <cmd>"), which means it can
print a useless "server already offline" message in some cases. The
message has been changed to a debugging message only.
The glibc symbol versions for memcpy were being applied to non-x86
targets, unintentionally, which broke builds for at least some targets.
(But pseudo doesn't usually get built for targets so it didn't
get noticed right away.)
Darren Hart [Fri, 18 Jul 2014 23:01:52 +0000 (23:01 +0000)]
kernelshark: Remove trace-cmd from the kernelshark package
Fixes [YOCTO 6550]
Images installing both trace-cmd and kernelshark would fail with:
error: file /usr/bin/trace-cmd conflicts between attempted installs of
kernelshark-1.2+git0+7055ffd37b-r3.core2_32 and
trace-cmd-1.2+git0+7055ffd37b-r3.core2_32
This patch removes ${bindir}/trace-cmd from the install prior to
packaging, as is already done with the ${datadir}.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
(cherry picked from commit eb08ae8f729ef77329892d19b23ddfdaa7953de0) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 17 Jul 2014 16:41:18 +0000 (17:41 +0100)]
xf86-video-intel: disable non-deterministic tests for libX11
libX11 et al are checked for at confgure time and tests optionally built. As
these don't get installed we don't want to add build dependencies, but the
non-determinism means that builds can fail.
Ming Liu [Tue, 15 Jul 2014 05:26:59 +0000 (13:26 +0800)]
insane.bbclass: avoid QA errors for n32 kernel
A series of commits had been integrated to avoid qa checking code
throwing the bitsize not matched error for x32 kernel files, the
same logic is also needed by n32 kernel which was not addressed in
that series.
This commit extends the condition for n32 kernel files.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ting Liu [Wed, 16 Jul 2014 10:35:58 +0000 (18:35 +0800)]
gcc: update *LIBC_* linker relocation reglex
* GLIBC_DYNAMIC_LINKER64 reglex does not work for rs6000/linux64.h,
update it.
* it turns out that UCLIBC_DYNAMIC_LINKER reglex will strip the 32/64
chars from UCLIBC_DYNAMIC_LINKER64/UCLIBC_DYNAMIC_LINKER32, add '\b'.
my two PCs: Centos 6.5 (python 2.7.5) and Fedora 13 (python 2.7.3)
Stopping sshd must only kill the listening (top-level) daemon; it must
not stop any other sshd process, because those are forked ssh
connections which may include e.g. the connection that called
/etc/init.d/sshd stop.
This initscript uses "start-stop-daemon -x <exe>" for starting/stopping.
When that is provided by busybox, this behavior is broken:
`/etc/init.d/sshd stop` stops *all* sshd processes. This was caused by a
fix to busybox 1.20: 17eedcad9406c43beddab3906c8c693626c351fb
"ssd: compat: match -x EXECUTABLE by /proc/pid/exe too".
The fix is to use a pidfile. All initscripts in upstream openssh do this,
as does dropbear.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglibc: rewritten tzselect as posix sh and move it to tzcode package
The problem is that this would cause bash installed to meta-toolchain,
the dependencies chain is:
meta-toolchain -> eglibc-utils -> bash
We should eliminate bash dependencies in anything core to a tiny system.
The eglibc-utils also provides eglibc-utils/usr/bin/zdump,
eglibc-utils/usr/bin/zic which all of them belonged to tzcode, so we
should split these three utils as tzcode package.
Darren Hart [Wed, 16 Jul 2014 14:16:02 +0000 (14:16 +0000)]
mkefidisk.sh: Add die() and cleanup() routines
Currently the script will attempt to continue even after a fatal error.
Add a die() routine which will abort in the case of a fatal error and
call a cleanup() routine to unmount any images or devices and remove the
TMPDIR.
Move the variable assignment and directory creation earlier in the
script, making it more obvious what we need to clean up.
Darren Hart [Wed, 16 Jul 2014 14:16:01 +0000 (14:16 +0000)]
mkefidisk.sh: Improve logging
Add logging functions: error, warn, info, and success, using tput to add
color highlighting.
Use these routines throughout the script, replacing echo statements and
adding "|| error" in several places to eliminate silent failures. Add a
simple exit block which checks for issues encountered while running.
Darren Hart [Wed, 16 Jul 2014 14:16:00 +0000 (14:16 +0000)]
mkefidisk.sh: Copy the EFI dir recursively
Rather than only copying the EFI/BOOT dir, copy the entire EFI dir
recursively. This allows for custom configurations to be enabled
implicitly with no extra work required.
Source /etc/default/urandom if present. This allows the rootfs to
remain read-only while enabling the user to override the location of the
random seed file.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initscripts: parametrize random seed file location
Currently, the random seed file location is hardcoded to
/var/lib/urandom/random-seed. Refactor it to a parameter
(RANDOM_SEED_FILE) so the file location is defined in only one place.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initscripts: save /etc/timestamp with seconds accuracy
Currently, /etc/timestamp is saved with minutes accuracy. To increase
the accuracy, modify the save-rtc.sh and bootmisc.sh scripts to save and
read /etc/timestamp respectively with seconds accuracy.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Thu, 17 Jul 2014 23:07:45 +0000 (16:07 -0700)]
libgpg-error: fix pkgconfig.patch
Typo in pkgconfig.patch:
-Libs: -L{libdir} -lgpg-error
vs.
+Libs: -L${libdir} -lgpg-error
This patch fixes failure in libgcrypt-native do_configure.
| ../x86_64-linux-libtool: line 6001: cd: {libdir}: No such file or directory
| x86_64-linux-libtool: link: cannot determine absolute directory name of `{libdir}'
common-mingw: force ac_cv_func_mmap_fixed_mapped=no
The expat mingw build breaks because ix86-common defines
ac_cv_func_mmap_fixed_mapped=yes, causing the build to think that
mmap(), mman.h actually exist. Fix this by always forcing the variable
to "no", which configure would have concluded without such interference.
populate_sdk_base: ensure that filenames with empty space character are handled
When extracting toolchain, if the list $executable_files has filenames
with empty space character, the list will created but relocate_sdk.sh
will not handle it well. This will lead to the below erro:
./tmp/deploy/sdk/buildtools-mytools-x86_64-nativesdk-standalone-1.6.1.0.sh
Enter target directory for SDK (default: /opt/mydistro/mytoolset/1.6.1.0):
You are about to install the SDK to "/opt/mydistro/mytoolset/1.6.1.0". Proceed[Y/n]?
Extracting SDK...done
Setting it up.../opt/mydistro/mytoolset/1.6.1.0/relocate_sdk.sh: line 2: sintaxe error `token' `('
/opt/mydistro/mytoolset/1.6.1.0/relocate_sdk.sh: line 2: `e
The same occurs with replacement of ${SDKPATH} in configs/scripts/etc files.
We should ensure that full path is protected before relocate_sdk.sh
and ${SDKPATH} replacement calls.
Richard Purdie [Fri, 18 Jul 2014 12:40:31 +0000 (13:40 +0100)]
subversion: Disable make install parallelism
The Makefile generation for subversion is horrible, I can't figure out
where the dependencies are missing, it looks like they might be missing
everywhere. Give up and disable parallel make install.
oeqa/controllers/beaglebonetarget.py: fix deploy when kernel file is a broken link
Sometimes the uncompressed rootfs image contains boot/uImage but if it's a symlink, it seems broken from the master image's point of view.
Because [ -e /mnt/testrootfs/boot/uImage ] will return 1, it will proceed to copy the backup kernel file over it but cp ~/test-kernel /mnt/testrootfs/boot/uImage will also fail with:
cp: not writing through dangling symlink
Adding a new check here, if the boot/uImage is a link, leave it as is.
2. Remove the unneeded patch.
The following patch has been removed because the logic in the related
codes of the new version has been changed. In specific, the codes now
can handle the 'NULL' return value. So there's no need for the following
patch.
slackware_fix_for_glib-2.17_crypt.patch
3. Teak the current patch to match the new version.
Roy.Li [Mon, 23 Jun 2014 06:28:30 +0000 (14:28 +0800)]
qemu: exclude some ARM EABI obsolete syscalls
some syscalls are obsolete and no longer available for EABI, exclude them to
fix the below error:
In file included from qemu-seccomp.c:16:0:
qemu-seccomp.c:28:7: error: '__NR_select' undeclared here (not in a function)
{ SCMP_SYS(select), 252 },
^
qemu-seccomp.c:36:7: error: '__NR_mmap' undeclared here (not in a function)
{ SCMP_SYS(mmap), 247 },
^
qemu-seccomp.c:57:7: error: '__NR_getrlimit' undeclared here (not in a function)
{ SCMP_SYS(getrlimit), 245 },
^
qemu-seccomp.c:96:7: error: '__NR_time' undeclared here (not in a function)
{ SCMP_SYS(time), 245 },
^
qemu-seccomp.c:185:7: error: '__NR_alarm' undeclared here (not in a function)
{ SCMP_SYS(alarm), 241 },
please refer source files:
arch/arm/include/uapi/asm/unistd.h
or kernel header:
/usr/include/asm/unistd.h
If users accidently override the DISTRO_FEATURES in local.conf,
then build failures occur for lack of libc functions.
All features in DISTRO_FEATURES_LIBC should be in DISTRO_FEATURES.
That's why this patch let the recipe inherit distro_features_check
class and set REQUIRED_DISTRO_FEATURES to "${DISTRO_FEATURES_LIBC}".
Richard Purdie [Wed, 16 Jul 2014 16:09:47 +0000 (16:09 +0000)]
python: Forcibly disable tk
Avoids the determinism problem shown with the warnings:
WARNING: QA Issue: python-tkinter rdepends on libx11 but its not a build dependency? [build-deps]
WARNING: QA Issue: python-tkinter rdepends on tcl-lib but its not a build dependency? [build-deps
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
