Robert Marko [Mon, 22 May 2023 21:42:13 +0000 (23:42 +0200)]
generic: filter out CONFIG_PAHOLE_HAS_SPLIT_BTF
CONFIG_PAHOLE_HAS_SPLIT_BTF should be runtime detected as it depends on
pahole being available on the host, so filter it out of configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 3591353f5143fc46e31f921484177a9d6f1089a2) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tony Ambardar [Sun, 21 May 2023 09:14:37 +0000 (02:14 -0700)]
bpftools: update, split off bpftool and libbpf packages
My original bpftools package made "variant" builds of bpftool and libbpf
as a convenience, since both used the same local kernel sources with the
same versioning. This is no longer the case, since the commit below
switched to using an out-of-tree build mirror hosting repos for each.
Replace bpftools with separate bpftool and libbpf packages, each simplified
and correctly versioned. Also fix the broken libbpf ABI introduced in the
same commit. Existing build .config files are not impacted.
Fixes: 00cbf6f6ab1d ("bpftools: update to standalone bpftools + libbpf, use the latest version") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit afe1bf11f2539f75e30ab3206891dbe6f8c43bd5) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Sam Shih [Sun, 19 Feb 2023 02:18:36 +0000 (10:18 +0800)]
mediatek: add basic mt7988 device tree support
This add basic device tree support for mediatek MT7988 SoC
Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit e3a681bab4b2c193704e76b8a6091e57f0fab14e)
Daniel Golle [Sun, 30 Apr 2023 16:13:33 +0000 (17:13 +0100)]
mediatek: filogic: add driver for Richtek RT5190A regulator
The Richtek RT5190A is used on the MT7988 reference board. Backport and
enable the driver on the filogic subtarget, so we can support cpufreq
on the MT7988 reference board.
Daniel Golle [Sun, 30 Apr 2023 16:41:22 +0000 (17:41 +0100)]
mediatek: add driver for built-in 2.5G Ethernet PHY
Add driver for the built-in 2.5G Ethernet PHY found in the MT7988 SoC.
To function the PHY also needs firmware files which have not yet been
published via linux-firmware.
Daniel Golle [Sun, 30 Apr 2023 13:32:03 +0000 (14:32 +0100)]
generic: mt7530: backport support for the MT7988 built-in switch
Backport commits adding support for the MT7988 built-in switch to the
mt7530 driver.
This change results in the Kconfig symbol NET_DSA_MT7530 to be extended
by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530)
and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in
switch of the MT7988 SoC).
Select NET_DSA_MT7530_MDIO for all targets previously selecting
NET_DSA_MT7530, with the exception of mediatek/filogic which also
selects NET_DSA_MT7530_MMIO.
Sam Shih [Sun, 19 Feb 2023 02:15:10 +0000 (10:15 +0800)]
mediatek: add mt7988 pinctrl driver support
This adds provisional pinctrl driver support for the MediaTek MT7988 SoC.
Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 9e6a7e808f2e9dd02733ccc41827940fb421091d)
Sam Shih [Sun, 19 Feb 2023 02:11:50 +0000 (10:11 +0800)]
mediatek: add mt7988 clock drivers support
This adds clock drivers for the MediaTek MT7988 SoC
Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit b33c1858767e5109913ac2195ec2b2b8ef0e726a)
Chukun Pan [Mon, 1 May 2023 15:20:28 +0000 (23:20 +0800)]
mediatek: mt7981: usb enable 3.0 by default
There is no reason to limit USB to 2.0 mode
by default, delete this limit.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit b2beb4c68849c804a8b9441f776a6918d433fb1e) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tony Ambardar [Fri, 5 May 2023 02:17:35 +0000 (19:17 -0700)]
kernel: enable (ARM|ARM64)_MODULE_PLTS in generic config
This allows loading modules with large memory requirements, recently needed
while testing on armvirt/32. Past forum discussions [1] and bug reports [2]
also raised this and the ipq806x target already set it in response [3].
Given this increases kernel image size by only ~1KB, is generally useful on
multi-platform kernels, and enabled by default on upstream arm32 Linux, add
it to the generic config.
The setting has similar utility on arm64, is a requirement for KASLR, and
already enabled on most OpenWrt aarch64 targets, so pull this into the
top-level generic config.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit c2d194a34eb1a62a610f0437287db6c3eca64d5a) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 22 May 2023 21:58:58 +0000 (22:58 +0100)]
mediatek: mt7623: build SD card without all filesystems
Allow building SD card images without having both initramfs and squashfs
present on the card, just like it has already been done for the mt7622
and filogic subtargets.
Refresh commands, run after busybox is first built once (nothing changed
compared to 1.36.0):
cd package/utils/busybox/config/
../convert_menuconfig.pl ../../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1
cd ..
./convert_defaults.pl ../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1/.config > Config-defaults.in
Manual edits needed afterward:
* Config-defaults.in: OpenWrt config symbol IPV6 logic applied to
BUSYBOX_DEFAULT_FEATURE_IPV6
* Config-defaults.in: OpenWrt logic applied to
BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917)
* Config-defaults.in: correct the default ports that get reset
BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80
BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23
* config/editors/Config.in: Add USE_GLIBC dependency to
BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090)
* config/shell/Config.in: change at "Options common to all shells" the conditional symbol
SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH
(discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html
Apparently our script does not see the hidden option while
prepending config options with "BUSYBOX_CONFIG_" which leads to a
missed dependency when the options are later evaluated.)
* Edit a few Config.in files by adding quotes to sourced items in
config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f)
Tested-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 3b76f6eee430a107a0970583c1aa215b35f7e3e4) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit c520d682f02890afb38e43b862ca856e2b933507) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 17fbbafdcbc55d6ab3d357012f336941fa27d43e) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Pietro Ameruoso [Mon, 22 May 2023 07:52:47 +0000 (09:52 +0200)]
mediatek: add support for Zyxel EX5601-T0 router
Zyxel EX5601-T0 specifics
--------------
The operator specific firmware running on the Zyxel branded
EX5601-T0 includes U-Boot modifications affecting the OpenWrt
installation.
The router boots BL2 which than loads FIP (u-boot).
U-boot has hardcoded a command to always launch Zloader "mtd read zloader 0x46000000" and than "bootm". Bootargs are deactivated.
Zloader is the zyxel booloader which allow to dual-boot ubi or ubi2, by default access to zloader is blocked.
Too zloader checks that the firmware contains a particolar file called zyfwinfo.
Additional details regarding Zloader can be found here:
https://hack-gpon.github.io/zyxel/
https://forum.openwrt.org/t/adding-openwrt-support-for-zyxel-ex5601-t0/155914
Installation
------------
Keep in mind that openwrt can only run on the UBI partition, the openwrt firmware is not able to understand the zloader bootargs.
The procedure allows restoring the UBI partition with the Zyxel firmware and retains all the OEM functionalities.
1. Unlock Zloader (this will allow to swap manually between partitions UBI and UBI2):
- Attach a usb-ttl adapter to your computer and boot the router.
- While the router is booting at some point you will read the following: `Please press Enter to activate this console.`
- As soon as you read that press enter, type root and than press enter again (just do it, don't care about the logs scrolling).
- Most likely the router is still printing the boot log, leave it boot until it stops.
- If everything went ok you should have full root access "root@EX5601-T0:/#".
- Type the following command and press enter: "fw_setenv EngDebugFlag 0x1".
- Reboot the router.
- As soon as you read `Hit any key to stop autoboot:` press Enter.
- If everything went ok you should have the following prompt: "ZHAL>".
- You have successfully unlocked zloader access, this procedure must be done only once.
2. Check the current active partition:
- Boot the router and repeat the steps above to gain root access.
- Type the following command to check the current active image: "cat /proc/cmdline".
- If `rootubi=ubi` it means that the active partition is `mtd6`
- If `rootubi=ubi2` it means that the active partition is `mtd7`
- As mentioned earlier we need to flash openwrt into ubi/mtd6 and never overwrite ubi2/mtd7 to be able to fully roll-back.
- To activate and boot from mtd7 (ubi2) enter into ZHAL> command prompt and type the following commands:
atbt 1 # unlock write
atsw # swap boot partition
atsr # reboot the router
- After rebooting check again with "cat /proc/cmdline" that you are correctly booting from mtd7/ubi2
- If yes proceed with the installation guide. If not probably you don't have a firmware into ubi2 or you did something wrong.
3. Flashing:
- Download the sysupgrade file for the router from openwrt, than we need to add the zyfwinfo file into the sysupgrade tar.
Zloader only checks for the magic (which is a fixed value 'EXYZ') and the crc of the file itself (256bytes).
I created a script to create a valid zyfwinfo file but you can use anything that does exactly the same:
https://raw.githubusercontent.com/pameruoso/OpenWRT-Zyxel-EX5601-T0/main/gen_zyfwinfo.sh
- Add the zyfwinfo file into the sysupgrade tar.
- Enter via telnet or ssh into the router with admin credentials
- Enter the following commands to disable the firmware and model checks
"zycli fwidcheck off" and "zycli modelcheck off"
- Open the router web interface and in the update firmware page select the "restore default settings option"
- Select the sysupgrade file and click on upload.
- The router will flash and reboot itself into openwrt from UBI
4. Restoring and going back to Zyxel firmware.
- Use the ZHAL> command line to manually swap the boot parition to UBI2 with the following:
atbt 1 # unlock write
atsw # swap boot partition
atsr # reboot the router
- You will boot again the Zyxel firmware you have into UBI2 and you can flash the zyxel firmware to overwrite the UBI partition and openwrt.
Working features
----------------
3 gbit lan ports
Wifi
Zyxel partitioning for coexistance with Zloader and dual boot.
WAN SFP port (only after exporting pins 57 and 10. gpiobase411)
leds
reset button
serial interface
usb port
lan ethernet 2.5 gbit port (autosense)
wan ethernet 2.5 gbit port (autosense)
Not working
----------------
voip (missing drivers or proper zyxel platform software)
Swapping the wan ethernet/sfp xor port
----------------
The way to swap the wan port between sfp and ethernet is the following:
export the pins 57 and 10.
Pin 57 is used to probe if an sfp is present.
If pin 57 value is 0 it means that an sfp is present into the cage (cat /sys/class/gpio/gpio468/value).
If pin 57 value is 1 it means that no sfp is inserted into the cage.
In conclusion by default both 57 an 10 pins are by default 1, which means that the active port is the ethernet one.
After inserting an SFP pin 57 will become 0 and you have to manually change the value of pin 10 to 0 too.
This is totally scriptable of course.
Leds description
------------
All the leds are working out of the box but the leds managed by the 2 maxlinear phy (phy 5 lan, phy6 wan).
To activate the phy5 led (rj45 ethernet port led on the back of the router) you have to use mdio-tools.
To activate the phy6 led (led on the front of the router for 2.5gbit link) you have to use mdio-tools.
Example:
Set lan5 led to fast blink on 2500/1000, slow blink on 10/100:
mdio mdio-bus mmd 5:30 raw 0x0001 0x33FC
Set wan 2.5gbit led to constant on when wan is 2.5gbit:
mdio mdio-bus mmd 6:30 raw 0x0001 0x0080
Signed-off-by: Pietro Ameruoso <p.ameruoso@live.it>
(cherry picked from commit 1c05388ab04c934ec240e8362321908f91381a90) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
CI: rework build workflow to have split target and subtarget directly
Instead of referring to a redundant job and ENV variables, rework build
workflow to accept and require split target and subtarget and use them
directly from inputs.
Rework each user and pass a JSON of tuple to matrix include with each
target/subtarget combination to test. Special notice this doesn't use
the github actions matrix combination feature but reference each
specific tuple of target and subtarget to test.
Just a cleanup no behaviour change intended.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit eecc6e48117be26c2eefd9257cceb9d9b1e842f2) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
MAC Address:
use address source1 source2
label 40:9b:xx:xx:xx:3c lan && wlan u-boot,env@ethaddr
lan 40:9b:xx:xx:xx:3c devdata@0x3f $label
wan 40:9b:xx:xx:xx:3f devdata@0x8f $label + 3
wlan2g 40:9b:xx:xx:xx:3c devdata@0x5b $label
wlan5g 40:9b:xx:xx:xx:3e devdata@0x76 $label + 2
Install via Web UI:
Apply factory image in the stock firmware's Web UI.
Install via Emergency Room Mode:
DIR-859 A1 will enter recovery mode when the system fails to boot
or press reset button for about 10 seconds.
First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1.
Then we can open http://192.168.0.1 in the web browser to upload
OpenWrt factory image or stock firmware. Some modern browsers may
need to turn on compatibility mode.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit 0ffbef9317a1dc049ad259c1ec1530355efc0552) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Shiji Yang [Sat, 20 May 2023 12:35:51 +0000 (20:35 +0800)]
ath79: improve support for D-Link DIR-8x9 A1 series
1. Remove unnecessary new lines in the dts.
2. Remove duplicate included file "gpio.h" in the device dts.
3. Add missing button labels "reset" and "wps".
4. Unify the format of the reg properties.
5. Add u-boot environment support.
6. Reduce spi clock frequency since the max value suggested by the
chip datasheet is only 25 MHz.
7. Add seama header fixup for DIR-859 A1. Without this header fixup,
u-boot checksum for kernel will fail after the first boot.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit e5d8739aa846db621b6368ba83db17c353a35dea) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The x86_64 UML target wants to include SSSE3 optimized
crypto code which lives under /arch/x86/crypto.
However, these are not built and this causes an error.
| ERROR: module '[...]/arch/x86/crypto/sha512-ssse3.ko' is missing.
| make[3]: *** [modules/crypto.mk:990: [...]/kmod-crypto-sha512_5.15.112-1_x86_64.ipk] Error 1
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 959563fb813890e478bf0a51523cd84d54b9af91) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
the UML build fails during the kernel build:
| arch/um/drivers/net_kern.c: In function 'compute_hash':
| arch/um/drivers/net_kern.c:322:1: error: the frame size of 1072 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
| 322 | }
| | ^
|cc1: all warnings being treated as errors
The compute_hash() function is added by our patch:
102-pseudo-random-mac.patch
Instead of allocating a 1024 byte buffer on the stack for the SHA1
digest input, let's allocate the data on the heap. We should be
able to do that since crypto_alloc_ahash and ahash_request_alloc
also need to allocate structures on the heap.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit aed2569d3780cab1a1a2d75c9f9e3fe413a9844d) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rafał Miłecki [Wed, 17 May 2023 09:58:16 +0000 (11:58 +0200)]
mac80211: brcm: drop brcmfmac patch waiting for register_wiphy()
That was a workaround for OpenWrt generation of config files. This patch
was used to postpone returning from probe function until loading
firmware and calling register_wiphy().
All of that is not needed anymore thanks to the ieee80211 hotplug.d
script introduced in the commit 5f8f8a366136 ("base-files, mac80211,
broadcom-wl: wifi detection and configuration"). That takes care of
generating /etc/config/wireless entries even if wireless device appears
late in the booting process.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit bd262663142e90f64f1c256b3e6b2b979c1022c0) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Robert Marko [Tue, 23 May 2023 12:55:48 +0000 (14:55 +0200)]
kernel: qca-ssdk: backport support for building as kernel module
Currently, SSDK is rather special in the sense that its not being built as
a proper out of tree module at all but rather like a userspace application
and that involves a lot of make magic which unfortunately broke with make
version 4.4 and newer.
Luckily QCA finally added a way to build SSDK as an out of tree module
and it uses the kernel buildsystem which makes it compile with make 4.4
as well.
So lets backport the support for it and switch to using it.
Petr Štetiar [Tue, 23 May 2023 14:56:09 +0000 (16:56 +0200)]
ci: push-containers: trigger job on release branching
Currently all 23.05 related CI jobs are failing as the containers are
not available, so lets fix it by pushing those containers when the
version.mk changes.
Petr Štetiar [Tue, 23 May 2023 12:17:47 +0000 (14:17 +0200)]
prereq: SetupHostCommand: fix wrong check result
Tony has reported, that CI tools job is failing for him in macOS
container due to prereq check failure for GNU `install` utility.
Michael diagnosed it and from his traces it was clear, that the issue is
caused by a wrong return value in the success check case, so lets fix it
accordingly.
Fixes: f75204036ccc ("prereq-build: allow host command symlinks to update") Reported-by: Tony Ambardar <itugrok@yahoo.com> Diagnosed-by: Michael Pratt <mcpratt@pm.me> Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 7855378fcd7ed7cb0a223238a99bac0b8e46c380)
Michael Pratt [Sun, 22 May 2022 10:10:56 +0000 (06:10 -0400)]
prereq-build: allow host command symlinks to update
This makes the prereq stage update the symlinks
installed into staging_dir/host/bin
by rearrainging the way they are verified.
Before, seeing or installing a symlink would result in
a successful exit code, and not installing a symlink
would result is a failed exit code. However,
that is not able to account for the difference
between existing good and bad links, or whether
the link would be the same if it was reinstalled,
because the check can match the program to a different path.
Instead, let a success exit code represent
identifying an existing symlink as exactly the same
as what would be installed if it did not exist,
and let a fail exit code represent
needing to install the symlink
or not having a match to the check criteria.
The failing exit code is caught by a new second attempt
for all of the check-* targets which will then indicate
to the user that there was an update by having a success
exit code when the check is run again and the link is the same.
When there is nothing to update, the checks will run only once.
This relies on the ls command to be POSIX-conformant with long format:
"path/to/link -> target/of/link"
Also, make sure the symlink is executable, not just a file,
and the directory only needs to be created once.
IGD is only useful when accelerating a VM guest that wants to direct
render to memory in the host's framebuffer, but since OpenWrt
typically runs on headless hardware, this serves no purpose.
Also build vfio with VFIO_NOIOMMU undefined (to get all of the code
enabled), but allow it to be enabled via boot-time modparams
settings (or at run-time via sysfs writes to
"/sys/module/vfio/parameters/enable_unsafe_noiommu_mode".
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Stan Grishin [Mon, 27 Feb 2023 00:04:33 +0000 (00:04 +0000)]
x86: base-files add support for Sophos 135r3/135r3w
The Sophos SG/XG-135 revision 3 has odd numbering of eth ports
where the WAN port (as marked on the case) is:
`eth6` and `eth0`, `eth1`, `eth2`, `eth3`, `eth5`, `eth7`, `eth8` are LAN ports.
Port `eth4` seems to be the SFP port.
Also add the missing LED definition for supported Sophos devices.
Original discussion at:
https://forum.openwrt.org/t/openwrt-on-revision-3-of-sophos-desktop-appliances/152912
kirkwood: add support for Iomega Storcenter ix4-200d
Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell
Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of
flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC
Notes:
- The blue drive LED is triggered by HDD activity, it can not be controlled
via GPIO.
- The LCD screen requires proprietary code and does not function at this time.
- Due to a kernel-related issue with the Marvell 88SE6121 SATA controller,
currently only trays numbered #3 and #4 work, #1 and #2 do not. [1]
Installation instructions:
1. download initramfs-uImage and copy into tftp server
2. connect the tftp server to network port #1
3. access uboot environment with serial cable and run
Signed-off-by: Sander van Deijck <sander@vandeijck.com>
(aligned FROM from signed-off. LED+key rename, whitespace removal) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 19 Apr 2023 06:41:18 +0000 (08:41 +0200)]
tfa-layerscape: Change to github and use the latest tag
The default location of tfa-layerscape has been changed from
codeuaurora to github. Also use the latest tag for Layerscape
Linux Development POC from NXP.
v2:
* restored ls1021a-afrdm board
* added platform defines to fiptool so ls-ddr-phy can be built
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:33:37 +0000 (11:33 +0200)]
ppfe-firmware: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of ppfe-firmware has been changed
from codeuaurora to github. Also use the latest tag for
Layerscape Linux Development POC from NXP.
Tested on:
* NXP FRWY-LS1012A
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:20:37 +0000 (11:20 +0200)]
uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of uboot-layerscape has been changed
from codeuaurora to github. Also use the latest tag for
Layerscape Linux Development POC from NXP.
Wojciech Dubowik [Wed, 12 Apr 2023 09:17:01 +0000 (11:17 +0200)]
ls-rcw: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of ls-rcw has been changed from codeuaurora
to github. The reason is that the old codeaurora source no longer
resolves. Also use the latest tag for Layerscape Linux Development
POC from NXP.
Tested on:
* NXP FRWY-LS1012A
* NXP LS1046A-RDB
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE, Mention that previous codeaurora source is
no longer available) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Sven Roederer [Thu, 11 May 2023 10:42:12 +0000 (12:42 +0200)]
build: escape whitespaces in VERSION_DIST for Netgear images
Prevents subshell commands from failing to parse options
when having defined a whitespace in the VERSION_DIST.
As the called resulting images unlikely will handle
whitespace correctly, we replace them by "-".
Signed-off-by: Sven Roederer <S.Roederer@colvistec.de>
Recently, a strange variant of ZTE MF286 was discovered, having QCA9886
radio instead of QCA9882 - like MF286A, but having MF286 flash layout
and rest of hardware.
To support both variants in one image, bind calibration data at offset
0x5000 both as "calibration" and "pre-calibration" nvmem-cells, so
ath10k can load caldata for both at runtime.
Jan Forman [Fri, 28 May 2021 07:45:52 +0000 (09:45 +0200)]
ath79: Add support for D-Link DIR-869-A1
Specifications
The D-Link EXO AC1750 (DIR-869) router released in 2016.
It is powered by Qualcomm Atheros QCA9563 @ 750 MHz chipset, 64 MB RAM and 16 MB flash.
10/100/1000 Gigabit Ethernet WAN port
Four 10/100/1000 Gigabit Ethernet LAN ports
Power Button, Reset Button, WPS Button, Mode Switch
Flashing
1. Upload factory.bin via D-link web interface (Management/Upgrade).
Revert to stock
Upload original firmware via OpenWrt sysupgrade interface.
Debricking
D-Link Recovery GUI (192.168.0.1)
Signed-off-by: Jan Forman <forman.jan96@gmail.com>
Jan Forman [Mon, 31 Oct 2022 21:15:56 +0000 (22:15 +0100)]
ath79: Convert calibration data to nvmem
For D-link DIR-859 and DIR-869
Replace the mtd-cal-data by an nvmem-cell.
Add the PCIe node for the ath10k radio to the devicetree.
Thanks to DragonBlue for this patch
Shiji Yang [Fri, 19 May 2023 06:05:01 +0000 (14:05 +0800)]
ramips: fix build error on Airlink AR670W
The 'KERNEL' is not referenced by other objects, so double '$$' will
cause shell unable to parse the variable 'BLOCKSIZE':
dd ... bs=$(BLOCKSIZE) conv=sync
bash: line 1: BLOCKSIZE: command not found
Fixes: 09a0efbe83(ramips: set default BLOCKSIZE to 64k for nor flash devices) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Hauke Mehrtens [Thu, 18 May 2023 15:12:36 +0000 (17:12 +0200)]
util-linux: Use SYS_getrandom in randutils.c
The getrandom syscall is not hanging at bootup any more if there is
not enough entropy. This was fixed upstream in 2018 in commit:
https://github.com/util-linux/util-linux/commit/a9cf659e0508c1f56813a7d74c64f67bbc962538
This OpenWrt patch is not needed any more.
This reverts commit e64463ebde55 ("util-linux: avoid using the getrandom syscall")
Hauke Mehrtens [Thu, 18 May 2023 18:07:24 +0000 (20:07 +0200)]
util-linux: Fix taskset conflict with busybox
This fixes the following error:
* check_data_file_clashes: Package taskset wants to install file build_dir/target-powerpc_8548_musl/root-mpc85xx/usr/bin/taskset
But that file is already provided by package * busybox
* opkg_install_cmd: Cannot install package taskset.
Nick Hainke [Thu, 18 May 2023 11:07:23 +0000 (13:07 +0200)]
libjson-c: import patch to fix compilation on macos
Fixes errors in the form of:
/Users/user/src/openwrt/openwrt/build_dir/hostpkg/json-c-0.16/json_util.c:63:35: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
const char *json_util_get_last_err()
^
void
1 error generated.
ninja: build stopped: subcommand failed.
Reported-by: Paul Spooren <mail@aparcar.org> Suggested-by: Paul Spooren <mail@aparcar.org> Signed-off-by: Nick Hainke <vincent@systemli.org>
Changelog: 06c027a f2fs-tools: upgrade version 1.16.0 542cc57 fsck.f2fs: fix sanity check logic for cp_payload a7df89e mkfs.f2fs: remove indentation c82985a fsck.f2fs: don't call report_zone on normal partition 0ac168e f2fs-tools: relax zone size of power of 2 641be32 mkfs.f2fs: trim all the devices except the first one 3835fef f2fs-tools: fix # of total segments 5b08ca9 f2fs_io: support AES_256_HCTR2 ae3301c f2fs_io: Fix out of tree builds ddbde27 fsck.f2fs: relocate chksum verification step during f2fs_do_mount() 77bf7ed f2fs-tools: Remove deprecated f2fstat fb6575e Remove sg_write_buffer 1bb669e fsck.f2fs: avoid uncessary recalculation ccd2361 fsck.f2fs: fix potential overflow of copying i_name cd6b133 fsck.f2fs: add parentheses for SB_MASK 399600a dump.f2fs: remove unavailable option -g 3e6e178 f2fs-tools: define HAVE_CLOCK_GETTIME properly 907b972 f2fs-tools: support F2FS_IOC_START_ATOMIC_REPLACE 9ff70fb f2fs-tools: give less overprovisioning space 844f821 f2fs-tools: set host-aware zoned device similar to host-managed one 88ac76d fsck.f2fs: fix missing to assign c.zoned_model 8cbe34e fsck.f2fs: trigger repairing if filesystem has inconsistent errors 2f1dde2 fsck.f2fs: trigger repairing if filesystem was forced to stop 465159f fsck.f2fs: export valid image size 3486b62 mkfs.f2fs: update allocation policy for ro feature bdd51e5 fsck.f2fs: fix __end_block_addr() 5a5e419 Always use sparse/sparse.h when building for Android 19f77c6 f2fs-tools: fix build error on lz4-1.9.4 986c1f1 Fix format strings in log messages 0d6acbe fsck.f2fs: use elapsed_time in checkpoint for period check 9b7a4c5 mkfs.f2fs: catch total_zones=0 instead of crashing 6148db3 f2fs-tools: use F2FS_BLKSIZE instead of PAGE_*_SIZE f09c2b7 f2fs_io: support triggering filesystem GC via ioctl 32e7d27 configure.ac: fix cross compilation 65fe94e configure.ac: fix AC_ARG_WITH 6325cf7 Use F2FS_BLKSIZE as the size of struct f2fs_summary_block c89be7a Use F2FS_BLKSIZE for dev_read_block() buffers 5317d18 Improve compile-time type checking for f2fs_report_zone() 92e2e52 Fix f2fs_report_zone() 648a491 Fix the struct f2fs_dentry_block definition c964547 resize.f2fs: add option to manually specify new overprovision a741438 fsck.f2fs: drop compression bit if inline_data is set 406b1c9 f2fs-tools: fix cannot get bdev information 9d0cb9e f2fs_io: add dsync option for write a7b8b46 tools: fix file too large causing overflow bddca6f dump.f2fs: add -I nid to dump inode by scan full disk ebc3879 android_config: add time headers c1144bf Check fallthrough in mount.h for Mac bcb9929 avoid unnecessary function 7d902f4 Fix dependencies on linux/blkzoned.h when using Bionic. 274abbb Remove unnecessary config.h 8c97ab3 libzone: remove duplicate header adcec10 Support zoned device if libc exists efc2bc7 mkfs.f2fs: fix typo 3034a41 mkfs.f2fs: split unused parameter dd8d8e5 f2fs-tools: do not use SG_IO in Android 4f216e6 f2fs-tools: move android_config before defining them 48c5dbb f2fscrypt: adjust config file first 4b55459 android_config: add missing uuid library
Robert Marko [Thu, 18 May 2023 10:20:15 +0000 (12:20 +0200)]
ipq40xx: fix rebooting after 5.15.111
Kernel 5.15.111 includes backport of commit
("firmware: qcom_scm: Clear download bit during reboot") which is causing
reboot on ipq40xx to stop working, more precisely the board will hang after
reboot is called with:
root@OpenWrt:/# reboot
root@OpenWrt:/# [ 76.473541] device lan1 left promiscuous mode
[ 76.474204] br-lan: port 1(lan1) entered disabled state
[ 76.527975] device lan2 left promiscuous mode
[ 76.530301] br-lan: port 2(lan2) entered disabled state
[ 76.579376] device lan3 left promiscuous mode
[ 76.581698] br-lan: port 3(lan3) entered disabled state
[ 76.638434] device lan4 left promiscuous mode
[ 76.638777] br-lan: port 4(lan4) entered disabled state
[ 76.978489] qca8k-ipq4019 c000000.switch wan: Link is Down
[ 76.978883] device eth0 left promiscuous mode
[ 76.987077] ipqess-edma c080000.ethernet eth0: Link is Down
[
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1339 - bootable_media_detect_entry, Start
B - 1679 - bootable_media_detect_success, Start
B - 1693 - elf_loader_entry, Start
B - 5076 - auth_hash_seg_entry, Start
B - 7223 - auth_hash_seg_exit, Start
B - 578349 - elf_segs_hash_verify_entry, Start
B - 696356 - PBL, End
B - 696380 - SBL1, Start
B - 787236 - pm_device_init, Start
D - 7 - pm_device_init, Delta
B - 788701 - boot_flash_init, Start
D - 52782 - boot_flash_init, Delta
B - 845625 - boot_config_data_table_init, Start
D - 3836 - boot_config_data_table_init, Delta - (419 Bytes)
B - 852841 - clock_init, Start
D - 7566 - clock_init, Delta
B - 864883 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:64
B - 868413 - sbl1_ddr_set_params, Start
B - 873402 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 877842 - Pre_DDR_clock_init, Start
D - 4 - Pre_DDR_clock_init, Delta
D - 13234 - sbl1_ddr_set_params, Delta
B - 891155 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 909105 - Image Load, Start
B - 1030210 - Boot error ocuured!. Error code: 303d
So, until a proper fix is found, lets revert the culprit patch to have
reboot working again.
Fixes: 228e0e10398b ("kernel: bump 5.15 to 5.15.111") Signed-off-by: Robert Marko <robimarko@gmail.com>
Hauke Mehrtens [Wed, 17 May 2023 22:31:21 +0000 (00:31 +0200)]
toolchain: glibc: Fix build with autoconf 2.71
The glibc build was failing with this error message:
aclocal.m4:6: error: Exactly version 2.69 of Autoconf is required but you have 2.71
aclocal.m4:6: the top level
The autoconf run on glibc is not needed, just remove it.
John Audia [Thu, 18 May 2023 10:18:23 +0000 (06:18 -0400)]
kernel: bump 5.15 to 5.15.112
Manually adjusted before running quilt due to new location in tree:
backport-5.15/780-v5.16-bus-mhi-pci_generic-Introduce-Sierra-EM919X-support.patch
backport-5.15/781-v6.1-bus-mhi-host-always-print-detected-modem-name.patch
pending-5.15/790-bus-mhi-core-add-SBL-state-callback.patch
Mark Baker [Thu, 11 May 2023 19:15:57 +0000 (15:15 -0400)]
umdns: Update to umdns HEAD
Update to umdns HEAD to include latest enhancements for browse method
filtering, return of TXT records as an array, dumping IPv4/6 as an
array, and including the interface name in a browse reply.
Signed-off-by: Mark Baker <mark@vpost.net> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x, mt7621, x86_64
Tianling Shen [Sat, 13 May 2023 04:19:52 +0000 (12:19 +0800)]
rockchip: merge bootscript
The bootscript for nanopi r2s/r4s only changes the serial address, so
make it auto detected in mmc bootscript rather than creating more
(redudant) files.
Tim Harvey [Tue, 28 Feb 2023 00:56:25 +0000 (16:56 -0800)]
gpio-button-hotplug: do not error on interrupt attached keys
The Linux gpio-keys driver bindings allow for GPIO attached or interrupt
attached keys. Currently if an interrupt attached key is encountered
gpio_keys_button_probe() will fail due to not being able to get a gpio
descriptor:
gpio-keys: probe of gpio-keys failed with error -2
Skip the failure in the case of interrupt attached keys to resolve this.
John Thomson [Sat, 24 Dec 2022 12:57:34 +0000 (22:57 +1000)]
kernel: modules: split smbfs-common from cifs
This kernel config symbol is a shared library used for both CIFS and the
in-tree SMB_SERVER.
Split it out into kmod-fs-smbfs-common from kmod-fs-cifs, and depend on
it, so that later in-tree ksmbd may also depend on it.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Shiji Yang [Sat, 13 May 2023 13:01:00 +0000 (21:01 +0800)]
ramips: add basic common recipe for nand flash devices
These same codes are repeated for many devices now, it's better to
move them to shared definition. This commit also add the missing
KERNEL_SIZE of the ZyXEL NR7101 and ZyXEL LTE3301-PLUS.
Shiji Yang [Sat, 13 May 2023 13:01:00 +0000 (21:01 +0800)]
ramips: set default BLOCKSIZE to 64k for nor flash devices
In kernel 5.15, the default erase sector size of the nor flash has
been switched from 4k to 64k. This may cause the configuration not
be preserved across upgrades. To avoid this issue, change the default
BLOCKSIZE to 64k.
Tianling Shen [Tue, 16 May 2023 04:38:53 +0000 (12:38 +0800)]
kernel: add MODULE_ALLOW_BTF_MISMATCH option
BTF mismatch can occur for a separately-built module even when the ABI
is otherwise compatible and nothing else would prevent successfully
loading. Add a new config to control how mismatches are handled. By
default, preserve the current behavior of refusing to load the
module. If MODULE_ALLOW_BTF_MISMATCH is enabled, load the module but
ignore its BTF information.
projects / thirdparty / openwrt.git / log
