wifi-scripts: fix creation of IBSS in legacy (non-HT) mode
When an IBBS interface is configured for IBSS legacy mode, wdev.htmode
is empty. This is empty string results in an empty positional argument
to the "ibbs join" command, for example:
This empty argument is interpreted as an invalid HT mode by 'iw',
causing the entire command to fail and print a "usage" message:
daemon.notice netifd: radio0 (4527): Usage: iw [options] \
dev <devname> ibss join <SSID> <freq in MHz> ...
Although nobody will ever need more than 640K of IBSS, explicitly use
"NOHT" if an HT mode is not given. This fixes the problem.
Fixes: e56c5f7b276a ("hostapd: add ucode support, use ucode for the main ubus object") Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [extend to cover more cases]
(cherry picked from commit cee9fcdb7350911f474544189817d25fd4070111)
Rany Hany [Sun, 5 May 2024 22:39:58 +0000 (01:39 +0300)]
mediatek: fix broken PCIe caused by update to 5.15.158
The patch "710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch"
makes use of "syscon_regmap_lookup_by_phandle" which requires that
"syscon" be in the compatible list.
Without this patch, PCIe probe will fail with the following error:
We exit 1 after saying that there are no patches because later in the
function quilt pop fails to execute.
Having no patches for a package and calling refresh should not be
a critical error and the function should just do nothing.
To handle this improve quilt.mk with the following addition.
- If we don't have any patch for the package, we print a warning and we
create an empty series. This is useful to trick quilt and make it do
nothing.
We also create a status file .quilt_no_patch to detect in the other
function that we don't have patches to handle.
- In refresh makefile target, we check if .quilt_no_patch exist and
we skip quilt cleanup if this exist.
- In RefreshDir function we change the logic and now we delete the
patches directory and not only the content. This is done as a cleanup
to clean case with empty patches directory.
- In RefreshDir we check if .quilt_no_patch exist and we skip creating
the patches directory and copying the refreshed patches.
- In RefreshDir we delete at the end any trace of .quilt_no_patch if
present.
This is needed to support run like package/refresh that will run the
refresh process on any package present in the buildroot.
quilt.mk: use CURDIR instead of ./ for PATCH_DIR and FILES_DIR
To better reference them for diagnostic use, reference the PATCH_DIR and
FILES_DIR with the absolute path instead of using ./ and reference by
the relative location.
tools/missing-macros: install files from HOST_BUILD_DIR instead of src
Install files from HOST_BUILD_DIR instead of src. These files are now
correctly copied to HOST_BUILD_DIR and can be referenced from there.
(cherry picked from commit 46bcbe42236bbe058eaeb89a0d1a4f22926cfdf9)
[ rebased on top of openwrt-23.05 ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
We currently skip defining Host/Prepare/Default if HOST_UNPACK is not
defined.
This is mostly the case for Host packages that just provide files with
the src directory and don't need to be downloaded/extracted.
This was probably done lots of times ago due to quilt causing error as
the patches directory wasn't present.
This has changed now and quilt can correctly detect if no patches needs
to be applied (instead of terminating with error)
Always define Host/Prepare/Default to make tools/refresh correctly works
as HOST_QUILT is hardcoded enabled for this make target and will
complain for tool not prepared for quilt patches.
Yuu Toriyama [Sat, 18 May 2024 22:08:37 +0000 (07:08 +0900)]
wireless-regdb: update to 2024.05.08
Changes: 73529a8 Revert "wireless-regdb: Update and disable 5470-5730MHz band according to TPC requirement for Singapore (SG)" 87941e4 wireless-regdb: Update regulatory rules for Taiwan (TW) on 6GHz 33797ae wireless-regdb: update regulatory database based on preceding changes
Rafał Miłecki [Sat, 18 May 2024 12:56:58 +0000 (14:56 +0200)]
mt76: fix mt7603 compilation
This fixes:
mt7603/dma.c: In function 'mt7603_rx_loopback_skb':
mt7603/dma.c:60:17: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
Fixes: 2568b30285ff ("mt76: backport mt7603 fixes important for its stability") Fixes: https://github.com/openwrt/openwrt/issues/15510 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Robert Marko [Thu, 16 May 2024 10:03:19 +0000 (12:03 +0200)]
ipq806x: mr42/mr52: fix PCIe ports
All three PCIe ports are reported non working on Meraki MR42/MR52 boards
since kernel 6.1 with the issue of PCIe PHY link never coming up thus
no WLAN cards are available on the boards.
After debugging it seems that PCIe worked on 5.15 and older purely by
accident as device DTS was using /delete-property/ perst-gpios; in each
of the 3 PCIe nodes but there was no "perst-gpios" property in the SoC DTSI
as it was still using the older "perst-gpio" property so it was not getting
removed from the device DTS.
However, in kernel 6.1 commit ("ARM: dts: qcom-*: replace deprecated
perst-gpio with perst-gpios") updated all Qualcomm DTS-es to use the newer
"perst-gpios" and thus once ipq806x moved to 6.1 PCIe stopped working as
now that property was being dropped from the device DTS.
So, since the removal of PERST pins seems to have been wrong from the start
lets drop the property removal from MR42/MR52.
Rafał Miłecki [Thu, 16 May 2024 12:11:24 +0000 (14:11 +0200)]
mt76: backport mt7603 fixes important for its stability
Those are required for stable MT7603E & on-SoC MT7628/MT7688 wireless
support. After mt76 receiving more testing we may just update codebase
and drop those backports.
Felix Fietkau [Thu, 16 May 2024 12:06:12 +0000 (14:06 +0200)]
mt76: update to Git HEAD (2024-02-03)
a9693e1979c2 linux-firmware: add firmware for MT7996 0258dc90e3a1 wifi: mt76: mt7603: fix reading target power from eeprom 3e81173d9e2b wifi: mt76: mt7603: initialize chainmask 786a339bac36 wifi: mt76: mt7996: fix fortify warning bc37a7ebc267 wifi: mt76: mt7996: fix fw loading timeout 027bab6a88a3 wifi: mt76: usb: create a dedicated queue for psd traffic e8909c610c3b wifi: mt76: usb: store usb endpoint in mt76_queue 8b3d96fa4ead wifi: mt76: mt792xu: enable dmashdl support 7864d7ad0ed0 wifi: mt76: mt76x2u: add netgear wdna3100v3 to device table 27c81f7c1480 wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band b7443c63069a wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band bab721a65f5a wifi: mt76: mt7925: fix mcu query command fail 1f0f71ed81e8 wifi: mt76: mt7925: fix wmm queue mapping bcfe2ad966f3 wifi: mt76: mt7925: fix fw download fail f982c3d67a29 wifi: mt76: mt7925: fix WoW failed in encrypted mode 6a72716ec213 wifi: mt76: mt7925: fix the wrong header translation config 50928b7e1359 wifi: mt76: mt7925: add flow to avoid chip bt function fail 762ab4530e8f wifi: mt76: mt7925: add support to set ifs time by mcu command 87deaf82efa4 wifi: mt76: mt7925: update PCIe DMA settings c190c1576522 wifi: mt76: mt7925: support temperature sensor 025d5734caba wifi: mt76: mt7996: check txs format before getting skb by pid 4768bfa2baca wifi: mt76: mt7996: fix TWT issues a65e3eced907 wifi: mt76: mt7996: disable AMSDU for non-data frames d71716d93aee wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps f21728f3f4bd wifi: mt76: mt7996: ensure 4-byte alignment for beacon commands 68dad7dacd2a wifi: mt76: mt7996: fix HE beamformer phy cap for station vif 66a28f340cdc wifi: mt76: mt7996: mark GCMP IGTK unsupported b47ad8a7764e wifi: mt76: mt7996: fix efuse reading issue c2fc7dae7b72 wifi: mt76: mt7996: remove TXS queue setting e0f1ed168ed5 wifi: mt76: mt7996: add locking for accessing mapped registers d0cc92c1fd08 wifi: mt76: connac: set correct muar_idx for mt799x chipsets ae0c62279adc wifi: mt76: mt7996: fix HIF_TXD_V2_1 value ecc14276af54 wifi: mt76: mt792x: fix ethtool warning 9827df56b241 wifi: mt76: move wed common utilities in wed.c dccbd2598505 wifi: mt76: mt7925: fix the wrong data type for scan command 9907f4f20261 wifi: mt76: mt792x: add the illegal value check for mtcl table of acpi 1b088a7ac06d wifi: mt76: mt7921e: fix use-after-free in free_irq() f3c5b4820d7f wifi: mt76: mt7925e: fix use-after-free in free_irq() d75eac9f5531 wifi: mt76: mt7921: fix incorrect type conversion for CLC command 7bd5401f5bb1 wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel config from ACPI ea55196bc4a0 wifi: mt76: mt792x: update the country list of EU for ACPI SAR 6124ea9135ed wifi: mt76: mt7921: fix the unfinished command of regd_notifier before suspend
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 114190d8ae61fb3a7671852fbd7f0ca3279a5625)
[rmilecki: add patches/fixes for regressions from this commit] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hauke Mehrtens [Sat, 11 May 2024 17:52:13 +0000 (19:52 +0200)]
kernel: bump 5.15 to 5.15.158
Removed because they are upstream:
generic/backport-5.15/702-v5.19-01-arm64-dts-mediatek-mt7622-add-support-for-coherent-D.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=506ac5538498717fce699feaddb2ed97ae1c3ca7
Removed because they are upstream:
generic/backport-5.15/741-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=d06977b9a4109f8738bb276125eb6a0b772bc433
Removed because they are upstream:
generic/backport-5.15/741-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=e719b52d0c56989b0f3475a03a6d64f182c85b56
Manual adapted the following patches:
generic/pending-5.15/700-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
generic/pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch
generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
Corey Minyard [Fri, 3 May 2024 13:12:38 +0000 (08:12 -0500)]
ipq40xx: Properly set MAC addresses for the EAP1300
The code that was there was just taking whatever was left in the
registers, which was just wrong. Set the addresses using the value from
the u-boot environment, the same way the OEM firmware does.
David Bauer [Thu, 25 Apr 2024 14:53:55 +0000 (16:53 +0200)]
mpc85xx: convert WS-AP3710i to simpleImage wrapper
Convert the Enterasys WS-AP3710i access point to use the simpleImage
wrapper.
This is necessary, as the bootlaoder does not align the DTB correctly
(and does not support altering the FDT loadaddress). Booting images with
kernels 5.15 and later can break depending on the alignment on the DTB
within the FIT image.
Compared with the patch applied to master, this compiles the loader at
the changed offset used in OpenWrt master. This is required, as U-Boot
loads the uImage at the offset the loader is currently compiled for.
Kevin Jilissen [Sat, 4 May 2024 14:12:20 +0000 (16:12 +0200)]
realtek: Trap LLDP packets to the CPU
We should setup the registers for trapping LLDP packets to the CPU.
Currently, these packets are forwarded to all ports which is not desired
behaviour.
Felix Fietkau [Mon, 18 Dec 2023 17:54:55 +0000 (18:54 +0100)]
mt76: update to Git HEAD (2023-12-18)
bebd9cffc2ae wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 1a57d758f229a1e8d9085cd4775ebe7e1ec5d9b2)
[rmilecki: it's a no-change for 23.05 as we had that fix backported]
Felix Fietkau [Mon, 11 Dec 2023 12:15:09 +0000 (13:15 +0100)]
mt76: update to Git HEAD (2023-12-11)
f63f87cd5b45 wifi: mt76: mt7996: fix shift overflow warning on 32 bit systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit da7b0351fce5dd59b79ea78d34c90c66b8bd6f6e)
[rmilecki: it's a no-change for 23.05 as we had that fix backported]
Rodrigo Balerdi [Fri, 10 May 2024 00:15:47 +0000 (21:15 -0300)]
ipq40xx: whw03v2: change LED color for 'running' state to blue
Change the RGB indicator LED color for the running state from green to
blue. There are various reasons for this change:
- In stock firmware, green means internet connection is up, red means it
is down, and blue means indeterminate. To track stock behavior as
closely as possible, OpenWrt should indicate blue by default.
- In the current 23.x OpenWrt releases for this router, the led glows
blue all the time -not green- because the bootloader sets it blue
and there is an OpenWrt bug that makes it unable to control the LED.
The bug is fixed in master, so without this commit there would be an
unexpected change of behavior for this device in the next release.
- The ports other closely related Linksys devices (such as EA8300 and
MR8300) get this right and use blue for the running state.
Felix Fietkau [Mon, 29 Apr 2024 16:58:41 +0000 (18:58 +0200)]
mt76: update to Git HEAD (2023-12-08)
890ae4d717f1 wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling fcc2f3d82bc9 wifi: mt76: fix lock dependency problem for wed_lock 77cc14596202 wifi: mt76: mt792x: move mt7921_skb_add_usb_sdio_hdr in mt792x module bc85355885d1 wifi: mt76: mt792x: move some common usb code in mt792x module c27f01c4c834 wifi: mt76: mt7996: get tx_retries and tx_failed from txfree 30aba4c18307 wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic 119bebff244b wifi: mt76: mt7996: enable PPDU-TxS to host a4005e0e83e7 wifi: mt76: mt7996: remove periodic MPDU TXS request d6cc20bf5913 wifi: mt76: reduce spin_lock_bh held up in mt76_dma_rx_cleanup 5d94251d641c wifi: mt76: mt7921: move connac nic capability handling to mt7921 266341b5019d wifi: mt76: mt7921: enable set txpower for UNII-4 581449ac5274 wifi: mt76: mt7921: add 6GHz power type support for clc 9bfd669e9477 wifi: mt76: mt7921: get regulatory information from the clc event 4a0f839da0f1 wifi: mt76: mt7921: update the channel usage when the regd domain changed f4df423d3d56 wifi: mt76: add ability to explicitly forbid LED registration with DT 54d369e79972 wifi: mt76: mt7921: support 5.9/6GHz channel config in acpi b39b6cba220f wifi: mt76: mt7996: fix uninitialized variable in parsing txfree 77194e652885 wifi: mt76: fix typo in mt76_get_of_eeprom_from_nvmem function c37738fc9097 wifi: mt76: limit support of precal loading for mt7915 to MTD only d6e8aa634a19 wifi: mt76: make mt76_get_of_eeprom static again d1c671a90eba wifi: mt76: permit to use alternative cell name to eeprom NVMEM load 5539001fe4e3 wifi: mt76: permit to load precal from NVMEM cell for mt7915 48d413380685 wifi: mt76: Remove unnecessary (void*) conversions ea2814289147 wifi: mt76: mmio: move mt76_mmio_wed_{init,release}_rx_buf in common code 9fb0277d7ee8 wifi: mt76: move mt76_mmio_wed_offload_{enable,disable} in common code 4b47145ecf44 wifi: mt76: move mt76_net_setup_tc in common code d798d5d6f770 wifi: mt76: introduce mt76_queue_is_wed_tx_free utility routine 48b0cedbf83f wifi: mt76: introduce wed pointer in mt76_queue c550204e347d wifi: mt76: increase MT_QFLAG_WED_TYPE size 2e7f30f22cfd wifi: mt76: mt7996: add wed tx support ec8765a02fc8 wifi: mt76: dma: introduce __mt76_dma_queue_reset utility routine a469aaac9784 wifi: mt76: mt7996: use u16 for val field in mt7996_mcu_set_rro signature abca260a15c4 wifi: mt76: mt7996: add wed rx support be2e74c0c495 wifi: mt76: move wed reset common code in mt76 module 7f17e164fbb4 wifi: mt76: mt7996: add wed reset support 0f89bf58efda wifi: mt76: mt7996: add wed rro delete session garbage collector a58b75f863ca wifi: mt76: mt7915: fallback to non-wed mode if platform_get_resource fails in mt7915_mmio_wed_init() 36d2ddd94eeb wifi: mt76: mt7996: add support for variants with auxiliary RX path cec7720c9341 wifi: mt76: mt7996: add TX statistics for EHT mode in debugfs 9852093062e8 wifi: mt76: connac: add thermal protection support for mt7996 955540a4df74 wifi: mt76: mt7996: add thermal sensor device support af41374a3b8e wifi: mt76: connac: add beacon duplicate TX mode support for mt7996 3c98d7b7fa23 wifi: mt76: mt7996: fix the size of struct bss_rate_tlv ee2169c00539 wifi: mt76: mt7996: adjust WFDMA settings to improve performance 0aead5de68a7 wifi: mt76: connac: set fixed_bw bit in TX descriptor for fixed rate frames ab5580ff5a4f wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGED eed234afed7e wifi: mt76: mt7996: align the format of fixed rate command d9a855285b95 wifi: mt76: mt7996: fix rate usage of inband discovery frames 47799aefe263 wifi: mt76: change txpower init to per-phy 264e1ecfe1b4 wifi: mt76: mt7996: add txpower setting support c7b243b127eb wifi: mt76: use chainmask for power delta calculation 05f433900a02 wifi: mt76: mt7996: switch to mcu command for TX GI report ae963198e605 wifi: mt76: mt7996: fix alignment of sta info event d0d2e03591d6 wifi: mt76: mt7996: rework ampdu params setting e87f4efc7638 wifi: mt76: connac: add beacon protection support for mt7996 0dfcc53a8e5d wifi: mt76: connac: fix EHT phy mode check 30c54a53bf8b wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981 17297c97b737 wifi: mt76: mt7915: also MT7981 is 3T3R but nss2 on 5 GHz band eeb48c081034 wifi: mt76: mt7996: fix mt7996_mcu_all_sta_info_event struct packing b74ad922659c wifi: mt76: mt7996: introduce mt7996_band_valid() 51cb541c1e53 wifi: mt76: connac: add firmware support for mt7992 c0eda4d96ec8 wifi: mt76: mt7996: add DMA support for mt7992 f12471968a53 wifi: mt76: mt7996: rework register offsets for mt7992 8d11dae73eb8 wifi: mt76: mt7996: support mt7992 eeprom loading 6c2b2c37abd7 wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992 df1d3b3c67e5 wifi: mt76: connac: add new definition of tx descriptor f997e759cea5 wifi: mt76: mt7996: add PCI IDs for mt7992 94e3632e4e93 wifi: mt76: mt7925: remove iftype from mt7925_init_eht_caps signature 9c7b98c03173 net: ethernet: mtk_wed: rename mtk_rxbm_desc in mtk_wed_bm_desc 4423b4eb69fb wifi: mt76: mt7996: fix endianness in mt7996_mcu_wed_rro_event b97d899a7907 wifi: mt76: mt7921: fix kernel panic by accessing invalid 6GHz channel info 9ef06028d4fe wifi: mt76: mt7921s: fix workqueue problem causes STA association fail 95c14207d2a9 wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAM dbea5151412b wifi: mt76: mt7921: reduce the size of MCU firmware download Rx queue a84a355d2e0a wifi: mt76: mt7921: fix country count limitation for CLC c498f27ad075 wifi: mt76: mt7921: fix CLC command timeout when suspend/resume 3098d968abe4 wifi: mt76: mt7921: fix wrong 6Ghz power type 7730fc91dd15 wifi: mt76: fix shift overflow warnings on 32 bit systems f559adf1849c wifi: mt76: fix crash with WED rx support enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 8f782ed07dc23b64bb24f63ce31d939ee6afb5ad)
[rmilecki: add patches/fixes for regressions from this commit] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Manual adapted the following patches:
generic/hack-5.15/221-module_exports.patch
bcm27xx/patches-5.15/950-0008-drm-vc4-hdmi-Use-a-mutex-to-prevent-concurrent-frame.patch
octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
Josef Schlehofer [Sun, 28 Apr 2024 21:04:03 +0000 (23:04 +0200)]
toolchain/gdb: backport patch for macOS to fix invalid range
With the recent macOS update to Ventura, it looks like gdb could not be
compiled with clang16 and newer version, because it fails with:
./../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 15] for this enumeration type [-Wenum-constexpr-conversion]
integer_for_size<sizeof (T), static_cast<bool>(T (-1) < T (0))>::type
^
./../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 1] for this enumeration type [-Wenum-constexpr-conversion]
./../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 3] for this enumeration type [-Wenum-constexpr-conversion]
./../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 3] for this enumeration type [-Wenum-constexpr-conversion]
4 errors generated.
Fixes: https://github.com/openwrt/openwrt/issues/15314 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15315 Signed-off-by: Robert Marko <robimarko@gmail.com>
mDNS broadcast can't accept empty TXT record and would fail
registration.
Current procd_add_mdns_service checks only if the first passed arg is
empty but don't make any verification on the other args permittins
insertion of empty values in TXT record.
Petr Štetiar [Mon, 30 Oct 2023 19:31:03 +0000 (19:31 +0000)]
tools: macOS: types.h: fix missing unsigned types
For some reason unsigned types were not added in commit 0a06fcf608dd
("build: fix kernel 5.4 on macos"), which led to bunch of hacks, like
commit 3cc57ba4627c ("uboot-sunxi: add missing type __u64") or
commit 997ff740dc44 ("uboot-mediatek: fix build on Mac OS X").
So lets add the missing unsigned types to workaround it in a bit more
maintainable way.
Remove debugging `env` dump left over as build environments might
contain some sensitive information, which then might leak into the build
logs.
Fixes: 2105acbe2804 ("kernel-headers: fix compile error caused by wrong host include path when the toolchain is already built") Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit def41cf2bab825e46a31eb0a9ccf51288edfe27d)
Petr Štetiar [Thu, 20 Jul 2023 13:48:39 +0000 (15:48 +0200)]
toolchain: kernel-headers: fix check target for external Git trees
Executing following command currently fails:
$ make toolchain/kernel-headers/{download,check} V=sc FIXUP=1
...
include/kernel-version.mk:11: *** Missing kernel version/hash file for . Please create include/kernel-. Stop.
So lets fix it by adding the necessary missing KERNEL_PATCHVER variable.
That additional kernel-build.mk include is needed to add another set of
missing variables:
$ make toolchain/kernel-headers/{download,check} V=sc FIXUP=1
...
Makefile:115: *** ERROR: Unknown pack format for file tmp/dl/. Stop.
Fixes: 0765466a42f4 ("kernel: split kernel version to dedicated files") Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 6b7f1ffbad732c5e1818f9387c02dda109c2748b)
It's needed by some drivers, e.g. mt7925, see:
mt7925/main.c:264:9: error: implicit declaration of function '_ieee80211_set_sband_iftype_data' [-Werror=implicit-function-declaration]
It's needed by some drivers, e.g. mt7925, see:
mt7925/mcu.c:2181:23: error: implicit declaration of function 'ieee80211_vif_is_mld' [-Werror=implicit-function-declaration]
Robert Marko [Fri, 29 Mar 2024 17:57:03 +0000 (18:57 +0100)]
tools: b43-tools: fix compilation with GCC14
GCC14 no longer treats integer types and pointer types as equivalent in
assignments (including implied assignments of function arguments and return
values), and instead fails the compilation with a type error.
So, as a workaround lets disable the newly introduced error
-Werror=int-conversion and just make it print a warning to enable compiling
with GCC14 as Fedora 40 now defaults to it.
Georgi Valkov [Fri, 19 Apr 2024 07:19:00 +0000 (10:19 +0300)]
kernel: backport ipeth CDC NCM support
Fixes no communication with tethered iOS devices in CDC NCM mode.
Freshly booted iOS devices start in legacy mode, but are put into
NCM mode by the official Apple driver.
Robert Marko [Mon, 8 Apr 2024 20:05:19 +0000 (22:05 +0200)]
config: fix CONFIG_GDB appearing in main menuconfig menu
I noticed that CONFIG_GDB was suddenly appearing in the main menuconfig
menu despite the fact that it should be visible only when TOOLCHAINOPTS
is selected and under a dedicated menu.
After some trial and error, it seems that this was caused by the recent
addition of GCC_USE_DEFAULT_VERSION, and after even more trial and error
it gets fixed as soon GCC_USE_DEFAULT_VERSION is placed after GCC_VERSION.
So, lets simply put GCC_USE_DEFAULT_VERSION after GCC_VERSION.
Fixes: 501ef81040ba ("config: select KERNEL_WERROR if building with default GCC version") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebased]
(cherry picked from commit 12b2cb2ec3f1366b65caa0dbbdd83846c1c88d4e)
Daniel Golle [Sun, 7 Apr 2024 18:50:04 +0000 (19:50 +0100)]
config: select KERNEL_WERROR if building with default GCC version
[ during cherry-pick GCC version was changed to default GCC 12 version ]
At the moment we have to manually follow the default GCC version
also in config/Config-kernel.in. This tends to be forgotten at GCC
version bumps (just happened when switching from version 12 to 13).
Instead, introduce a hidden Kconfig symbol which implies KERNEL_WERROR
in toolchain/gcc/Config.in where it is visible for developers changing
the default version.
Also remove the explicit default on BUILDBOT to avoid a circular
dependency and also because buildbots anyway implicitly always select
the default GCC version.
Reference: https://github.com/openwrt/openwrt/pull/15064 Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> [GCC 12 default]
(cherry picked from commit 501ef81040baa2ee31de6dd9f75d619de0e4c9bc)
Petr Štetiar [Wed, 24 May 2023 07:46:45 +0000 (09:46 +0200)]
kernel: introduce KERNEL_WERROR config option
In commit b2d1eb717b65 ("generic: 5.15: enable Werror by default for
kernel compile") CONFIG_WERROR=y was enabled and all warnings/errors
reported with GCC 12 were fixed.
Keeping this in sync with past/future GCC versions is going to be uphill
battle, so lets introduce new KERNEL_WERROR config option, enable it by
default only for tested/known working combinations and on buildbots.
This device supports channel ranges 36-64 and 100-165, just like
others based on the same reference design, but its current DTS is
unnecessarily restricting these ranges to 36-48 and 149-165.
Daniel Golle [Tue, 9 Jan 2024 19:54:51 +0000 (19:54 +0000)]
mvebu: puzzle-m90x: wipe rootfs_data on sysupgrade
The sysupgrade formware of the Puzzle series is a slightly strange
dual-boot approach while remaining compatible with Marvell's SDK
firmware upgrade binary format -- which happens to be a full-disk
image with GPT partition table. Hence that /lib/upgrade/emmc-puzzle.sh
script is like an exotic disease which results from those decisions,
and as we also want to somehow stay compatible with the IEI-World
stock firmware we got to use it in that same way (we are not
compatible with the QNAP-branded identical hardware device anyway).
Currently, on sysupgrade the result is that one ends up with the old
content of rootfs_data (a GPT partition on those devices) as nothing
ever wipes or in any way re-creates the filesystem there. As a simple
work-around, let's kill the filesystem on rootfs_data so fstools
re-formats it on the next boot.
Robert Marko [Mon, 8 Apr 2024 15:52:22 +0000 (17:52 +0200)]
sdk: include lib/crtsavres.o for powerpc
Trying to link certain kernel modules like dahdi-linux when building with
the OpenWrt SDK will fail with:
openwrt-sdk-apm821xx-sata_gcc-13.2.0_musl.Linux-x86_64/staging_dir/toolchain-powerpc_464fp_gcc-13.2.0_musl/bin/powerpc-openwrt-linux-musl-ld: cannot find arch/powerpc/lib/crtsavres.o: No such file or directory
Previously this worked with the PowerPC SDK since we carried a hack that
was passing --save-restore-funcs to module LDFLAGS so the linker provided
the required functions automatically as without --save-restore-funcs it
doesnt do so automatically on relocatable links and as a sideffect did not
require the kernel provided crtsaves.o to link against.
Now that hack has been removed as upstream kernel now compiles crtsaves.o
by default so it can be linked against but its not included in the SDK.
So, lets include lib/crtsavres.o when SDK is generated for PowerPC.
Fixes: 1c28058710fd ("kernel: bump 5.15 to 5.15.148") Signed-off-by: Robert Marko <robimarko@gmail.com>
Huawei AP5030DN is a dual-band, dual-radio 802.11ac Wave 1 3x3 MIMO
enterprise access point with two Gigabit Ethernet ports and PoE
support.
Hardware highlights:
- CPU: QCA9550 SoC at 720MHz
- RAM: 256MB DDR2
- Flash: 32MB SPI-NOR
- Wi-Fi 2.4GHz: QCA9550-internal radio
- Wi-Fi 5GHz: QCA9880 PCIe WLAN SoC
- Ethernet 1: 10/100/1000 Mbps Ethernet through Broadcom B50612E PHY
- Ethernet 2: 10/100/1000 Mbps Ethernet through Marvell 88E1510 PHY
- PoE: input through Ethernet 1 port
- Standalone 12V/2A power input
- Serial console externally available through RJ45 port
- External watchdog: SGM706 (1.6s timeout)
Serial console:
9600n8 (9600 baud, no stop bits, no parity, 8 data bits)
MAC addresses:
Each device has 32 consecutive MAC addresses allocated by
the vendor, which don't overlap between devices.
This was confirmed with multiple devices with consecutive
serial numbers.
The MAC address range starts with the address on the label.
To be able to distinguish between the interfaces,
the following MAC address scheme is used:
- eth0 = label MAC
- eth1 = label MAC + 1
- radio0 (Wi-Fi 5GHz) = label MAC + 2
- radio1 (Wi-Fi 2.4GHz) = label MAC + 3
Installation:
0. Connect some sort of RJ45-to-USB adapter to "Console" port of the AP
1. Power up the AP
2. At prompt "Press f or F to stop Auto-Boot in 3 seconds",
do what they say.
Log in with default admin password "admin@huawei.com".
3. Boot the OpenWrt initramfs from TFTP using the hidden script
"run ramboot". Replace IP address as needed:
4. Optional but recommended as the factory firmware cannot
be downloaded publicly:
Back up contents of "firmware" partition using the web interface or ssh:
5. Run sysupgrade using sysupgrade image. OpenWrt
shall boot from flash afterwards.
Return to factory firmware (using firmware upgrade package downloaded from
non-public Huawei website):
1. Start a TFTP server in the directory where
the firmware upgrade package is located
2. Boot to u-boot as described above
3. Install firmware upgrade package and format the config partitions:
> update system FatAP5X30XN_SOMEVERSION.bin
> format_fs
Return to factory firmware (from previously created backup):
1. Copy over the firmware partition backup to /tmp,
for example using scp
2. Use sysupgrade with force to restore the backup:
sysupgrade -F huawei_ap5030dn_fw_backup.bin
3. Boot AP to U-Boot as described above
Quirks and known issues
-----------------------
- On initial power-up, the Huawei-modified bootloader suspends both
ethernet PHYs (it sets the "Power Down" bit in the MII control
register). Unfortunately, at the time of the initial port, the kernel
driver for the B50612E/BCM54612E PHY behind eth0 doesn't have a resume
callback defined which would clear this bit. This makes the PHY unusable
since it remains suspended forever. This is why the backported kernel
patches in this commit are required which add this callback and for
completeness also a suspend callback.
- The stock firmware has a semi dual boot concept where the primary
kernel uses a squashfs as root partition and the secondary kernel uses
an initramfs. This dual boot concept is circumvented on purpose to gain
more flash space and since the stock firmware's flash layout isn't
compatible with mtdsplit.
- The external watchdog's timeout of 1.6s is very hard to satisfy
during bootup. This is why the GPIO15 pin connected to the watchdog input
is configured directly in the LZMA loader to output the CPU_CLK/4 signal
which keeps the watchdog happy until the wdt-gpio kernel driver takes
over. Because it would also take too long to read the whole kernel image
from flash, the uImage header only includes the loader which then reads
the kernel image from flash after GPIO15 is configured.
Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
[fixed 6.6 backport patch naming] Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 06cdc07f8cc703ef7dcb3e7b329b9abff0806a6e)
Hauke Mehrtens [Fri, 29 Mar 2024 22:15:41 +0000 (23:15 +0100)]
kernel: bump 5.15 to 5.15.153
Removed because they are upstream:
generic/backport-5.15/704-15-v5.19-net-mtk_eth_soc-move-MAC_MCR-setting-to-mac_finish.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=c5c0760adc260d55265c086b9efb350ea6dda38b
The U-boot menu will automatically appear at startup, and then select
the required options through UP/DOWN Key.
NAND Flash and eMMC Flash instructions:
1. Set your computers IP adress to 192.168.1.2.
2. Run a TFTP server providing the sysupgrade.bin image.
3. Power on the router, into the U-Boot menu.
4. Select "2. Upgrade firmware"
5. Update sysupgrade.bin file name, input server IP and input device
IP (if they deviate from the defaults)
6. Wait for automatic startup after burning
Tianling Shen [Mon, 25 Mar 2024 16:40:37 +0000 (00:40 +0800)]
rockchip: remove 'swiotlb' parameter from boot script
We have hardware IOMMU support and this is totally unnecessary.
The given value is also unreasonable, it's too small and causes
kernel panic in some cases:
[ 5706.856473] sdhci-dwcmshc fe310000.mmc: swiotlb buffer is full (sz: 28672 bytes), total 512 (slots), used 498 (slots)
[ 5706.864451] sdhci-dwcmshc fe310000.mmc: swiotlb buffer is full (sz: 65536 bytes), total 512 (slots), used 464 (slots)
This parameter seems to be added by mistake, so remove it.
Felix Fietkau [Sun, 31 Mar 2024 17:57:03 +0000 (19:57 +0200)]
unetd: update to Git HEAD (2024-03-31)
52144f723bec pex: after receiving data update req, notify peer of local address/port 29aacb9386e0 pex: track indirect hosts (reachable via gateway) as peers without adding them to wg 48049524d4fc pex: do not send peer notifications for hosts with a gateway 12ac684ee22a pex: do not query for hosts with a gateway 203c88857354 pex: fix endian issues on config transfer a29d45c71bca network: fix endian issue in converting port to network id cbbe9d337a17 unet-cli: emit id by default 806457664ab6 unet-cli: strip initial newline in usage message
Hauke Mehrtens [Tue, 26 Mar 2024 00:18:15 +0000 (01:18 +0100)]
kernel: bump 5.15 to 5.15.152
Removed because it is upstream:
generic/backport-5.15/081-v5.17-regmap-allow-to-define-reg_update_bits-for-no-bus.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=fbddd48f1456db32b675fad95a902de38345902a
Robert Marko [Wed, 13 Mar 2024 11:47:31 +0000 (12:47 +0100)]
dnsmasq: reset PKG_RELEASE
dnsmasq was recently updated to 2.90, but PKG_RELEASE was not reset to 1.
Fixes: 838a27f64f56 ("dnsmasq: version 2.90") Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 694e6477848eade21851ec27d90c173b373099fc)
Bump to 2.90 to get upstream's fix for DNSSEC KeyTrap (CVE-2023-50387,
CVE-2023-50868) among many other goodies and fixes (notably, upstream 568fb024... fixes a UAF in cache_remove_uid that was routinely crashing
dnsmasq in my deployment).
Sven Eckelmann [Sat, 18 Nov 2023 15:29:09 +0000 (16:29 +0100)]
dnsmasq: mark global ubus context as closed after fork
If the dnsmasq process forks to handle TCP connections, it closes the ubus
context. But instead of changing the daemon wide pointer to NULL, only the
local variable was adjusted - and this portion of the code was even dropped
(dead store) by some optimizing compilers.
It makes more sense to change the daemon->ubus pointer because various
functions are already checking it for NULL. It is also the behavior which
ubus_destroy() implements.
Fixes: d8b33dad0bb7 ("dnsmasq: add support for monitoring and modifying dns lookup results via ubus") Signed-off-by: Sven Eckelmann <sven@narfation.org>
(cherry picked from commit 711dcb77630e96e75413b5cdbe3ddb5432f394f6)
Rafał Miłecki [Wed, 17 Jan 2024 21:20:15 +0000 (22:20 +0100)]
mediatek: filogic: replace built-in Aquantia driver with module
Some Aquantia PHYs (e.g. AQR113C) require firmware to be uploaded by
host system. With built-in drivers this doesn't work in OpenWrt /
embeddded as filesystem isn't available during PHY probe. That results
in delays like:
[ 1.588068] Aquantia AQR113C mdio-bus:00: Falling back to sysfs fallback for: Rhe-05.06-Candidate9-AQR_Mediatek_23B_P5_ID45824_LCLVER1.cld
[ 64.526387] Aquantia AQR113C mdio-bus:00: failed to find FW file Rhe-05.06-Candidate9-AQR_Mediatek_23B_P5_ID45824_LCLVER1.cld (-110)
Switch to module to postpone PHY probe to init state.
Daniel Golle [Sun, 17 Mar 2024 15:55:09 +0000 (15:55 +0000)]
mvebu: enable thermal zone polling for IEI Puzzle devices
Marvell's thermal sensors do not support interrupts, so we need to
poll them. Reading temperature every second should be enough to
control the fan.
While at it, also make sure fan speed is reduced again if temperature
goes down.
* New upstream microcode datafile 20240312 (closes: #1066108)
- Mitigations for INTEL-SA-INTEL-SA-00972 (CVE-2023-39368):
Protection mechanism failure of bus lock regulator for some Intel
Processors may allow an unauthenticated user to potentially enable
denial of service via network access.
- Mitigations for INTEL-SA-INTEL-SA-00982 (CVE-2023-38575):
Non-transparent sharing of return predictor targets between contexts in
some Intel Processors may allow an authorized user to potentially
enable information disclosure via local access. Affects SGX as well.
- Mitigations for INTEL-SA-INTEL-SA-00898 (CVE-2023-28746), aka RFDS:
Information exposure through microarchitectural state after transient
execution from some register files for some Intel Atom Processors and
E-cores of Intel Core Processors may allow an authenticated user to
potentially enable information disclosure via local access. Enhances
VERW instruction to clear stale register buffers. Affects SGX as well.
Requires kernel update to be effective.
- Mitigations for INTEL-SA-INTEL-SA-00960 (CVE-2023-22655), aka TECRA:
Protection mechanism failure in some 3rd and 4th Generation Intel Xeon
Processors when using Intel SGX or Intel TDX may allow a privileged
user to potentially enable escalation of privilege via local access.
NOTE: effective only when loaded by firmware. Allows SMM firmware to
attack SGX/TDX.
- Mitigations for INTEL-SA-INTEL-SA-01045 (CVE-2023-43490):
Incorrect calculation in microcode keying mechanism for some Intel
Xeon D Processors with Intel SGX may allow a privileged user to
potentially enable information disclosure via local access.
* Fixes for other unspecified functional issues on many processors
* Updated microcodes:
sig 0x00050653, pf_mask 0x97, 2023-07-28, rev 0x1000191, size 36864
sig 0x00050656, pf_mask 0xbf, 2023-07-28, rev 0x4003605, size 38912
sig 0x00050657, pf_mask 0xbf, 2023-07-28, rev 0x5003605, size 37888
sig 0x0005065b, pf_mask 0xbf, 2023-08-03, rev 0x7002802, size 30720
sig 0x00050665, pf_mask 0x10, 2023-08-03, rev 0xe000015, size 23552
sig 0x000506f1, pf_mask 0x01, 2023-10-05, rev 0x003e, size 11264
sig 0x000606a6, pf_mask 0x87, 2023-09-14, rev 0xd0003d1, size 307200
sig 0x000606c1, pf_mask 0x10, 2023-12-05, rev 0x1000290, size 299008
sig 0x000706a1, pf_mask 0x01, 2023-08-25, rev 0x0040, size 76800
sig 0x000706a8, pf_mask 0x01, 2023-08-25, rev 0x0024, size 76800
sig 0x000706e5, pf_mask 0x80, 2023-09-14, rev 0x00c4, size 114688
sig 0x000806c1, pf_mask 0x80, 2023-09-13, rev 0x00b6, size 111616
sig 0x000806c2, pf_mask 0xc2, 2023-09-13, rev 0x0036, size 98304
sig 0x000806d1, pf_mask 0xc2, 2023-09-13, rev 0x0050, size 104448
sig 0x000806ec, pf_mask 0x94, 2023-07-16, rev 0x00fa, size 106496
sig 0x000806f8, pf_mask 0x87, 2024-01-03, rev 0x2b000590, size 579584
sig 0x000806f7, pf_mask 0x87, 2024-01-03, rev 0x2b000590
sig 0x000806f6, pf_mask 0x87, 2024-01-03, rev 0x2b000590
sig 0x000806f5, pf_mask 0x87, 2024-01-03, rev 0x2b000590
sig 0x000806f4, pf_mask 0x87, 2024-01-03, rev 0x2b000590
sig 0x00090661, pf_mask 0x01, 2023-09-26, rev 0x0019, size 20480
sig 0x00090672, pf_mask 0x07, 2023-09-19, rev 0x0034, size 224256
sig 0x00090675, pf_mask 0x07, 2023-09-19, rev 0x0034
sig 0x000b06f2, pf_mask 0x07, 2023-09-19, rev 0x0034
sig 0x000b06f5, pf_mask 0x07, 2023-09-19, rev 0x0034
sig 0x000906a3, pf_mask 0x80, 2023-09-19, rev 0x0432, size 222208
sig 0x000906a4, pf_mask 0x80, 2023-09-19, rev 0x0432
sig 0x000906c0, pf_mask 0x01, 2023-09-26, rev 0x24000026, size 20480
sig 0x000906e9, pf_mask 0x2a, 2023-09-28, rev 0x00f8, size 108544
sig 0x000906ea, pf_mask 0x22, 2023-07-26, rev 0x00f6, size 105472
sig 0x000906ec, pf_mask 0x22, 2023-07-26, rev 0x00f6, size 106496
sig 0x000906ed, pf_mask 0x22, 2023-07-27, rev 0x00fc, size 106496
sig 0x000a0652, pf_mask 0x20, 2023-07-16, rev 0x00fa, size 97280
sig 0x000a0653, pf_mask 0x22, 2023-07-16, rev 0x00fa, size 97280
sig 0x000a0655, pf_mask 0x22, 2023-07-16, rev 0x00fa, size 97280
sig 0x000a0660, pf_mask 0x80, 2023-07-16, rev 0x00fa, size 97280
sig 0x000a0661, pf_mask 0x80, 2023-07-16, rev 0x00fa, size 96256
sig 0x000a0671, pf_mask 0x02, 2023-09-14, rev 0x005e, size 108544
sig 0x000b0671, pf_mask 0x32, 2023-12-14, rev 0x0122, size 215040
sig 0x000b06a2, pf_mask 0xe0, 2023-12-07, rev 0x4121, size 220160
sig 0x000b06a3, pf_mask 0xe0, 2023-12-07, rev 0x4121
sig 0x000b06e0, pf_mask 0x11, 2023-09-25, rev 0x0015, size 138240
* New microcodes:
sig 0x000a06a4, pf_mask 0xe6, 2024-01-03, rev 0x001c, size 136192
sig 0x000b06a8, pf_mask 0xe0, 2023-12-07, rev 0x4121, size 220160
sig 0x000c06f2, pf_mask 0x87, 2023-11-20, rev 0x21000200, size 549888
sig 0x000c06f1, pf_mask 0x87, 2023-11-20, rev 0x21000200
* source: update symlinks to reflect id of the latest release, 20240312
* changelog, debian/changelog: fix typos
-- Henrique de Moraes Holschuh <hmh@debian.org> Tue, 12 Mar 2024 20:28:17 -0300
mediatek: filogic: Asus TUF AX6000 fix inverted LED for 2.5Gb LAN port
Router Asus TUF AX6000 have second MaxLinear GPY211 PHY controller for 2.5Gb LAN port.
The 5'th LAN port have inverted status of the LED.
Based on the commit from main branch 90fbec8 we could set proper status of the LED.
Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
(cherry picked from commit b22539b5fef9572f9ce2bedcd01d083c918d82f1) Signed-off-by: Tom Herbers <mail@tomherbers.de>
Daniel Golle [Sun, 10 Dec 2023 01:15:36 +0000 (01:15 +0000)]
kernel: hack: support inverted LEDs on MaxLinear GPY211 PHY
Add downstream DT property to setup the PHY LEDs of the MaxLinear
GPY211 PHY in such way that the VDD of the LED is driven by the SoC
pin rather than the GND (which is the default).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 90fbec89be263a3838558c5b674f3c4072cc2f1d)
[removed patches for kernel 6.1] Signed-off-by: Tom Herbers <mail@tomherbers.de>
filogic: fix wifi eeprom filename for tuf-ax6000 The router use mt7986_eeprom_mt7976_dual.bin
Fixes: d522ccecb2 ("filogic: add support for ASUS TUF AX6000") Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
(cherry picked from commit 0c3f4bd85ee6067588a81843a403850ab0082270) Signed-off-by: Tom Herbers <mail@tomherbers.de>
Mikhail Zhilkin [Sat, 2 Mar 2024 19:58:40 +0000 (19:58 +0000)]
ramips: add support for Z-ROUTER ZR-2660
This commit adds support for Z-ROUTER ZR-2660 (also known as Routerich
AX1800) wireless WiFi 6 router.
Specification
-------------
- SoC : MediaTek MT7621AT, MIPS, 880 MHz
- RAM : 256 MiB
- Flash : NAND 128 MiB (AMD/Spansion S34ML01G2)
- WLAN :
- 2.4 GHz : MediaTek MT7905D/MT7975 (14c3:7916), b/g/n/ax, MIMO 2x2
- 5 GHz : MediaTek MT7915E (14c3:7915), a/n/ac/ax, MIMO 2x2
- Ethernet : 10/100/1000 Mbps x4 (1x WAN, 3x LAN)
- USB : 1x 2.0
- UART : 3.3V, 115200n8, pins are silkscreened on the pcb
- Buttons : 1x Reset
- LEDs : 1x WiFi 2.4 GHz (green)
1x WiFi 5 GHz (green)
1x LAN (green)
1x WAN (green)
1x WAN no-internet (red)
- Power : 12 VDC, 1 A
Installation
------------
1. Run tftp server on your PC (IP: 192.168.2.2) and put OpenWrt initramfs
image (initramfs.bin) to the tftp root dir
2. Open the following link in the browser to enable telnet:
http://192.168.2.1/cgi-bin/telnet_ssh
3. Connect to the router (default IP: 192.168.2.1) using telnet shell
(credentials - user:admin)
4. Run the following commands in the telnet shell (this will install
OpenWrt initramfs image on nand flash):
cd /tmp
tftp -g -r initramfs.bin 192.168.2.2
mtd write initramfs.bin firmware
mtd erase firmware_backup
reboot
5. Copy OpenWrt sysupgrade image (sysupgrade.bin) to the /tmp dir of the
router
6. Connect to the router (IP: 192.168.1.1) using ssh shell and run
sysupgrade command:
sysupgrade -n /tmp/sysupgrade.bin
Return to stock
---------------
1. Copy stock firmware (stock.bin) to the /tmp dir of the router using scp
2. Run following command in the router shell:
cd /tmp
mtd write stock.bin firmware
reboot
Recovery
--------
Connect uart (pins are silkscreened on the pcb), interrupt boot process by
pressing any key, use u-boot menu to flash stock firmware image or OpenWrt
initramfs image.
MAC addresses
-------------
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| LAN | 24:0f:5e:xx:xx:4c | label |
| WAN | 24:0f:5e:xx:xx:4d | label+1 |
| WLAN 2g | 24:0f:5e:xx:xx:4e | label+2 |
| WLAN 5g | 24:0f:5e:xx:xx:4f | label+3 |
+---------+-------------------+-----------+
The WLAN 2.4 MAC was found in 'factory', 0x4
The LAN MAC was found in 'factory', 0xfff4
The WAN MAC was found in 'factory', 0xfffa
Daniel Golle [Wed, 13 Mar 2024 18:44:52 +0000 (18:44 +0000)]
generic: mtk_eth_soc: fix PPE hanging issue
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.
Without this patch, the PPE may experience a hang during the reboot test.
Flash instructions:
The vendor firmware is based on OpenWrt, the sysupgrade image can be
flashed using the '-F' (force) option on the CLI.
Make sure not to keep settings when doing so.
This device is very similar, if not identical, to the TP-Link AX23 v1
but is targeted at service providers and features a completely different
flash layout.
Flashing is only possible via a serial connection using the sysupgrade
image; the factory image must be signed. You can flash the sysupgrade
image directly through the U-Boot console, or preferably, by booting the
initramfs image and flashing with the sysupgrade command. Follow these
steps for sysupgrade flashing:
1. Establish a UART serial connection.
2. Set up a TFTP server at 192.168.0.2 and copy the initramfs image
there.
3. Power on the device and press any key to interrupt normal boot.
4. Load the initramfs image using tftpboot.
5. Boot with bootm.
6. If you haven't done so already, back up all stock mtd partitions.
7. Copy the sysupgrade image to the router.
8. Flash OpenWrt through either LuCI or the sysupgrade command. Remember
not to attempt saving settings.
Revert to stock firmware
------------------------
Flash stock firmware via OEM web-recovery mode. If you don't have access
to the stock firmware image, you will need to restore the firmware
partition backed up earlier.
Web-Recovery
------------
The router supports an HTTP recovery mode:
1. Turn off the router.
2. Press the reset button and power on the device.
3. When all LEDs start flashing, release reset and quickly press it
again.
The interface is reachable at 192.168.0.1 and supports installation of
the OEM factory image. Note that flashing OpenWrt this way is not
possible, as mentioned above.
Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.
Cudy WR1300 v3 differs from v2 only in swapped WiFi chip PCIe slots. Common
nodes are extracted to .dtsi and new v2 and v3 dts are created.
Cudy WR1300 v2 dts now contains ieee80211-freq-limit.
The same manufacturer's built OpenWRT image is provided for both v2 and v3
devices as a step in installing, but for proper WiFi functionality,
a separate build is required.
Recovery:
- Loads only signed manufacture firmware due to bootloader RSA verification
- serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
- connect to any lan ethernet port
- power on the device while holding the reset button
- wait at least 8 seconds before releasing reset button for image to
download
- See http://www.cudytech.com/newsinfo/547425.html
Hauke Mehrtens [Fri, 8 Mar 2024 13:43:08 +0000 (14:43 +0100)]
lantiq: Fix build after kernel 5.15.150
This fixes the following compile problem:
````
CC arch/mips/kernel/vpe-mt.o
arch/mips/kernel/vpe-mt.c: In function 'vpe_run':
arch/mips/kernel/vpe-mt.c:32:23: error: unused variable 'physical_memsize' [-Werror=unused-variable]
32 | unsigned long physical_memsize = 0L;
| ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:289: arch/mips/kernel/vpe-mt.o] Error 1
````
physical_memsize was removed from upstream kernel, see:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=5b4f6c5ff65c8551018ccea40c569afd759734c0
Fixes: 387fde0da0e8 ("kernel: bump 5.15 to 5.15.150") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 9cfa5f74175d5c663bcf5973024fb76223972033)
Hauke Mehrtens [Sun, 3 Mar 2024 11:25:27 +0000 (12:25 +0100)]
kernel: bump 5.15 to 5.15.150
Removed because it is upstream:
bcm53xx/patches-5.15/030-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cb1003c07e746e4e82bdd3959c9ea37018ed41a3
Removed because it is upstream:
bcm53xx/patches-5.15/037-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c65a23e98e38dc991f495d6bdb3cfa6163a88a0c
Removed because it is upstream:
bcm53xx/patches-5.15/037-v6.6-0005-ARM-dts-BCM53573-Drop-nonexistent-usb-cells.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=71475bcee001cae3844644c2787eef93b26489d1
Adapted hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch to match
the changes from the upstream flow offload patch:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7c71b831220edeab7ce603d818dc1708d9ea4137
Manually Adapted the following patch:
bcm53xx/patches-5.15/035-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch
projects / thirdparty / openwrt.git / log
