Benjamin Berg [Wed, 30 Apr 2025 19:15:18 +0000 (21:15 +0200)]
mac80211: add patch to suppress PREP when mesh forwarding is disabled
This fixes a bug where mac80211 would respond to a PREQ frame when a
neighbor table entry exists locally even though it will not forward the
frame and the reported path does not actually work.
Robert Marko [Sat, 24 May 2025 10:20:54 +0000 (12:20 +0200)]
image: only filter out images when ImageBuilder is used
Currently, we are filtering out images if DEFAULT:=n or BROKEN:=y are set,
so if you are building from scratch and want to build custom images that
are stripped down to fit, you must edit the image recipe or its just
filtered out.
So, to allow this behaviour when building from scratch as we can assume
that person doing that knows what they are attempting to do lets just limit
the filtering to ImageBuilder.
Fixes: f060615a78e5 ("image: respect DEFAULT and BROKEN when Default profile is selected") Signed-off-by: Robert Marko <robimarko@gmail.com>
Import pending PXA I2C recovery fixes so that if I2C recovery is enabled in
the DTS it does not completely break I2C as it currently does since kernel
6.6.
Stijn Tintel [Thu, 1 May 2025 22:46:25 +0000 (01:46 +0300)]
realtek: add missing symbol
Commit d7e82c78d7a2 added a generic kernel patch that exposes a new
symbol REALTEK_PHY_HWMON when REALTEK_PHY and HWMON are enabled. The new
symbol was added to kmod-phy-realtek, but the kmod is not used in the
realtek target.
Fixes: d7e82c78d7a2 ("generic: backport Realtek PHY patches from upstream") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit ab8708767299c2aebe6a2c1f62abf246214d0d1c)
Sync jitterentropy source code with linux-6.12 to solve the
issue of jitterentropy initialization failed:
[ 9.523489] jitterentropy: Initialization failed with host not compliant with requirements: 9
[ 9.661916] kmodloader: 1 module could not be probed
[ 9.662377] kmodloader: - jitterentropy_rng - 0
In linux upstream commit cf27d9475f37 ("crypto: jitter - use
permanent health test storage"), when FIPS crypto is disabled,
the health test results are always explicitly skipped. That means
it will never return error code 9 (health test failed) again.
Robert Marko [Fri, 16 May 2025 11:18:46 +0000 (13:18 +0200)]
image: respect DEFAULT and BROKEN when Default profile is selected
Currently, when you select the Default profile it does not honor DEFAULT:=n
nor BROKEN:=y in device profiles but rather just tries to build all of them.
This may work when building directly, but when using Image Builder it will
always fail since no kernel or anything else is present for devices that
have DEFAULT:=n or BROKEN:=Y set since those are skipped during build.
So, lets look for DEFAULT being set to "n" or BROKEN being set to "y" and
then remove clear _PROFILE_SET so they dont end up being marked for
installation.
Henry Tung [Sun, 4 May 2025 18:29:54 +0000 (11:29 -0700)]
mac80211: ath11k: fix broadcast failures during GTK rekeying
Revert key_cipher change to NONE when clearing key.
Setting to NONE triggers asserts in the firmware and causes broadcast
drops with ath11k firmware 2.9.0.1, so until a future blob
fixes this, revert this as a workaround.
Imported from
https://git.codelinaro.org/clo/qsdk/oss/system/feeds/wlan-open/-/blob/win.wlan_host_opensource.3.0.r24/patches/ath11k/350-ath11k-Revert-clear-the-keys-properly-when-DISABLE_K.patch
David Bauer [Tue, 13 May 2025 23:49:44 +0000 (01:49 +0200)]
ramips: pad EX400 kernel partition to retain web recovery
The web-recovery of the Genexis EX400 validates uploaded images to fit
in the rootf_0 partition.
With OpenWrt, only the kernel is stored in this partition, leaving the
partition very small. Currently, the first factory release image won't
be accepted by the recovery interface after the OpenWrt installation.
Pad the image of the ubifs to 10MB. This allows the 24.10 release image
to be uploaded, enabling device recovery.
David Bauer [Sun, 4 May 2025 02:45:03 +0000 (04:45 +0200)]
ramips: support Genexis EX400 touch controller
Add the necessary package dependencies as well as device-tree properties
to support the touch-inputs as well as missing LEDs on the Genexis Pulse
EX400 range extender.
David Bauer [Sun, 4 May 2025 02:47:32 +0000 (04:47 +0200)]
ramips: add Semtech SX9512 touch input driver
This driver is required for the touch-inputs as well as some LEDs on the
Genexis Pulse EX400.
The driver was also sent upstream. As the EX400 is currently the only
consumer, the driver is added target-specific for ramips.
Once the driver has been accepted upstream and is provided in a kernel
release used by OpenWrt, the package should be moved to the global input
drivers.
Eric Fahlgren [Thu, 8 May 2025 22:28:52 +0000 (15:28 -0700)]
imagebuilder: exclude metadata for profiles that have no kernel
Device profiles that specify 'DEFAULT := n' are being included
in the imagebuilder metadata, specifically in .profiles.mk, even
though there is no kernel built for the device. This results in
'make info' showing the device as valid, but then 'make image
PROFILE=xxx' failing with 'No rule to make target xxx-kernel.bin ...'
We exclude these profiles from the imagebuilder, avoiding these
errors.
Olgun Demir [Sun, 20 Apr 2025 05:04:33 +0000 (07:04 +0200)]
ramips: Add support for Xiaomi MiWiFi 3A
The Xiaomi MiWiFi 3A wireless router has a similar system architecture as the Xiaomi Mi 4A router, which is already officially supported by OpenWrt.
Product website: https://www.mi.com/miwifi3a
Device specification
--------------------
SoC: MT7628AN MIPS_24KEc @ 580 MHz 2.4G-bgn 2x2
WiFi: MT7612EN 5G-an, ac 80 MHz 2T2R
Flash: 16 MB
DRAM: 64 MB
Switch: MT7628AN (integrated in SoC)
Ethernet: 1 x 10 /100 Mbps
USB: None
Antennas: 2 x 2,4 GHz and 2 x 5 GHz (all are external and non-detachable)
LEDs: blue/red/amber
Buttons: Reset
Serial: 115200,8n1
MAC addresses as verified by OEM firmware:
------------------------------------------
use address source
LAN *:DD factory 0x28
WAN *:DD factory 0x28
2g *:DE factory 0x4
5g *:DF factory 0x8004
OEM firmware uses VLAN's to create the network interface for WAN and LAN.
Bootloader info:
----------------
The stock bootloader uses a "Dual ROM Partition System".
OS1 is a deep copy of OS2.
The bootloader starts OS2 by default.
To force start OS1 it is needed to set "flag_try_sys2_failed=1".
How to install:
---------------
1- Use OpenWRTInvasion to gain Telnet, SSH and FTP access: https://github.com/acecilia/OpenWRTInvasion
[IP: 192.168.31.1 | Username: root | Password: root | FTP-Port: 21]
2- Connect to router using telnet or ssh.
3- Backup all partitions. Use command "dd if=/dev/mtd0 of=/tmp/mtd0". Copy /tmp/mtd0 to computer using ftp.
4- Copy openwrt-ramips-mt76x8-xiaomi_miwifi-3a-squashfs-sysupgrade.bin to /tmp in router using ftp.
5- Enable UART access and change start image to OS1.
nvram set uart_en=1
nvram set flag_last_success=1
nvram set boot_wait=on
nvram set flag_try_sys2_failed=1
nvram commit
mediatek: filogic: add support for WAVLINK WL-WN573HX3
The WL-WN573HX3 is an AX3000 outdoor Access Point by WAVLINK,
also sold in Europe as 7Links WLR-1300 (ZX-5612).
Specifications:
- MT7981B + MT7976 AX3000 2x2 DBDC (160 MHz)
- 16 MiB SPI NOR, 256 MiB RAM
- Gigabit ethernet port, 802.3af PoE
- IP67 outdoor case for wall or pole mounting with
four single band RP-SMA fiberglass antennas (8 dBi)
Installation:
- OEM Web UI is at 192.168.30.1 which will forward to
http://netlogin.link (using a captive portal)
- login with default password `admin`
- skip setup wizard by navigating directly to
http://netlogin.link/html/meshUpgrade.html
- upload WN573HX3-sysupgrade.bin
- reset to factory defaults to discard OEM UCI settings
MAC address assignment:
LAN 80:xx:xx:76:xx:25 hw 0x44e
WLAN 2.4G 80:xx:xx:76:xx:27 factory 0x04 (label MAC)
WLAN 5G 82:xx:xx:46:xx:27
pair key 8a:xx:xx:76:xx:27 also on label, not used by OpenWrt
Schneider Azima [Mon, 10 Mar 2025 01:42:51 +0000 (18:42 -0700)]
mediatek: add support for Mercusys MR80X v3
This commit adds support for Mercusys MR80X(EU) v3 router.
Device specification:
- SoC: Mediatek MT7981b, Cortex-A53, 64-bit
- RAM: 512MB
- Flash: SPI NAND GigaDevice GD5F1GQ5UEYIGY (128 MB)
- Ethernet: 4x 100/1000 Mbps LAN1,LAN2,LAN3 & WAN
- Wireless: 2.4GHz (802.11 b/g/n/ax)
- Wireless: 5GHz (802.11 a/n/ac/ax)
- LEDs: 1 orange and 1 green status LEDs, 4 green gpio-controlled LEDs
on ethernet ports
- Buttons: 1 (Reset)
- Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, both UBI
slots contain "seconduboot" (also U-Boot 2022.01-rc4)
Installation (UART):
- Place OpenWrt initramfs-kernel image on tftp server with IP 192.168.1.2
- Attach UART, switch on the router and interrupt the boot process by
pressing 'Ctrl-C'.
- Set the uboot environment for startup.
setenv tp_boot_idx 0; setenv bootcmd bootm 0x46000000; saveenv
If the bootarg is set to boot from ubi1, also change it to ubi0.
- Load and run OpenWrt initramfs image.
setenv serverip 192.168.1.2; setenv ipaddr 192.168.1.1; tftpboot initramfs-kernel.bin; bootm
- Login as root via SSH (IP 192.168.1.1, port 22)
- Upload OpenWrt sysupgrade.bin image to the /tmp dir of the router
- Run sysupgrade:
sysupgrade -n /tmp/sysupgrade.bin
Recovery:
- Press Reset button and power on the router.
- Navigate to U-Boot recovery web server (http://192.168.1.1/) and
upload the OEM firmware.
generic: drop extra-old-deprecated pending fix patch for sch codel
Patch 620-net_sched-codel-do-not-defer-queue-length-update.patch is
actually an ancient patch that somehow manage to be ported for 7 solid
years.
This comes from [1] where a fix patch was proposed. Nobody notice that
the proposed patch was actually rejected upstream in favor of [2]. And
the upstream fix patch is present in kernel from version 4.18.
This means that we were actually fixing for a non existant bug and maybe
introducing regression down the line.
Drop the patch for good as we already have a fix for it in flace for a
long time.
2. Connect the PC via LAN to one of the yellow router ports and wait
until your PC to get a DHCP lease.
3. Browse to http://192.168.50.1
4. If your router is brand new, finish the setup process and log into
the Web-UI.
5. Navigate to Administration -> Firmware Upgrade and upload the
downloaded OpenWrt image.
6. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
using scp and install using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
-----------------------------------------------------------
TFTP Method
-----------------------------------------------------------
1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
reachable at 192.168.1.70/24. Rename the image to rtax52.bin.
2. Connect the PC with TFTP server to the RT-AX52.
Set a static ip on the ethernet interface of your PC.
(ip address: 192.168.1.70, subnet mask:255.255.255.0)
Conect to the serial console,
interrupt the autoboot process by pressing '4' when prompted.
4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
using scp and install using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
---------------------------------------------------------------------------
Revert to stock firmware:
1: Download the rt-ax52 firmware from ASUS official website. Save
the firmware to tftp server directory and rename to RT-AX52.trx
2: Connect the PC with TFTP server to the RT-AX52.
Set a static ip on the ethernet interface of your PC.
(ip address: 192.168.1.70, subnet mask:255.255.255.0)
3: Conect to the serial console, power on again, interrupt the
autoboot process by pressing '4' when prompted.
$: ubi remove linux
$: ubi remove jffs2
$: ubi remove rootfs
$: ubi remove rootfs_data
$: ubi create linux 0x45fe000
$: reset
Then the dut will reboot,interrupt the autoboot process by
pressing '2' when prompted.
2: Load System code then write to Flash via TFTP.
Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
$: enter y
you will see the follow, type enter directly:
Input device IP (192.168.1.1) ==:
Input server IP (192.168.1.70) ==:
Input Linux Kernel filename (RT-AX52.trx) ==:
4: wait for the device run up
Based on support for ASUS RT-AX52 by liudongdongdong7397
and trx image generation by remittor
Signed-off-by: Christoph Krapp <achterin@gmail.com>
(cherry picked from commit 50d9ca6e5a04724e4263a348bdbe5ff4b1c43998)
(remove factory image generation) Signed-off-by: David Bauer <mail@david-bauer.net>
Robert Marko [Fri, 2 May 2025 09:07:54 +0000 (11:07 +0200)]
toolchain: binutils: fix compilation with GCC15
GCC15 has switched the C language default from GNU17 to GNU23[1] and this
causes builds to fail with:
In file included from mips-opc.c:29:
mips-opc.c: In function 'decode_mips_operand':
mips-formats.h:86:7: error: expected identifier or '(' before 'static_assert'
86 | static_assert[(1 << (SIZE)) == ARRAY_SIZE (MAP)]; \
| ^~~~~~~~~~~~~
mips-opc.c:214:15: note: in expansion of macro 'MAPPED_REG'
214 | case 'z': MAPPED_REG (0, 0, GP, reg_0_map);
| ^~~~~~~~~~
So, backport upstream fix for this[2] to fix compilation with GCC15.
Patch for 2.40 was manually refreshed as part of the S390 code does not
exist in 2.40 as it was added after it.
Robert Marko [Wed, 16 Apr 2025 12:04:26 +0000 (14:04 +0200)]
tools: gmp: fix compilation with GCC15
Fedora 42 updated to GCC15 which now defaults to GNU23 as the default
instead of GNU17[1], and this breaks GMP compilation by failing to find
a working compiler test.
Its been fixed upstream [2][3], so backport the fix to fix GCC15 compilation.
In include/host-build.mk, HOST_BUILD_DIR is set by default value:
HOST_BUILD_DIR ?= $(BUILD_DIR_HOST)/$(PKG_NAME)
However the mold package has no PKG_NAME set at all. This means the
HOST_BUILD_DIR is identical to $(BUILD_DIR_HOST).
In the Host/Prepare stage, by default, the $(HOST_BUILD_DIR) will be
deleted at first unconditionally. Since HOST_BUILD_DIR is identical
to $(BUILD_DIR_HOST), the entire build_dir/toolchain-* directory will
be removed and this will cause build failure.
Pavel Kubelun [Wed, 16 Apr 2025 18:07:32 +0000 (21:07 +0300)]
kernel: r8125: disable ASPM
Disable ASPM support for this NIC, fixing strange behavior problems, such as
increased latency, strange uneven throughput, etc.
With this option disabled the NIC achieves stable performance.
Upsteam r8169 driver disables ASPM by default for this NIC.
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
This issue was introduced in v6.6.69 with the following backport:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=36a6e8aeae4a41767bb59f56b100c8cc9ffae2cb
Daniel Golle [Fri, 28 Mar 2025 15:40:28 +0000 (15:40 +0000)]
generic: fitblk: close block device if mapping image failed
In case a broken fit image is present on flash the fitblk driver would
not map any /dev/fit* devices, but also not always close the block device
the image resides on. In case of ubiblock devices this is fatal as one
then cannot remove the ubiblock device (-EBUSY), and hence cannot replace
the broken image.
Always close the block device in case no sub-image was mapped.
* Update Mozilla certificate authority bundle to version 2.70.
The following certificate authorities were added (+):
+ Telekom Security TLS ECC Root 2020
+ Telekom Security TLS RSA Root 2023
+ FIRMAPROFESIONAL CA ROOT-A WEB
+ TWCA CYBER Root CA
+ SecureSign Root CA12
+ SecureSign Root CA14
+ SecureSign Root CA15
The following certificate authorities were removed (-):
- Security Communication Root CA (closes: #1063093)
ath79: fix initramfs execution for NEC Aterm devices
Fix execution of initramfs image on NEC Aterm devices by increasing
available memory for lzma extraction of lzma-loader.
The size of initramfs image of v24.10.0 exceeds available memory
(LZMA_TEXT_START - LOADADDR) and loader data running at LZMA_TEXT_START
will be overwritten by extracted data. As a result, LZMA extraction will
be broken and stuck (or unexpectedly reset).
Fix that issue by setting higher LZMA_TEXT_START address to increase
available memory for LZMA extraction by lzma-loader.
Matthias Franck [Fri, 31 Jan 2025 09:00:46 +0000 (10:00 +0100)]
busybox: use external libtirpc when using glibc
In recent glibc versions rpc functionality has been moved to a separate
library instead of glibc itself.
Depend on this library when rpc functionality is needed and glibc is
used.
Ming Kuang [Fri, 21 Mar 2025 15:21:05 +0000 (23:21 +0800)]
wifi-scripts: mac80211.sh: add EHT and HE160 support to iw_htmode
For WIFI7 devices (such as mt7925e), the dev width is currently
always "20 MHz (no HT)" in monitor mode.
Add EHT and HE160 support to iw_htmode to fix this issue.
Additionally, the following changes are made:
1. Set iw_htmode to 160MHz for VHT160. The reason for the current
VHT160 setting is unclear and seems to have been in place for
over a decade (ibss_htmode [1]). If anyone knows its impact,
please inform me so I can restore it.
2. Modify MHZ to MHz. The original matching table in the current
iw tool uses MHz. Although the match is case-insensitive,
correcting this won't hurt.
Shiji Yang [Wed, 2 Apr 2025 00:10:29 +0000 (08:10 +0800)]
ath10k-ct: remove "qcom,coexist-support" property type hack
The ath10k dt-binding property "qcom,coexist-support" was
explicitly defined as type uint8 since upstream commit ed09c61eb19d ("dt-bindings: net: Convert ath10k to YAML").
Therefore, this hack patch no longer makes sense.
Shiji Yang [Fri, 28 Mar 2025 16:00:50 +0000 (00:00 +0800)]
ath10k-ct: silence some harmless noisy logs
Users feel anxious about some ath10k driver logs. After further
investigation, in fact these logs are harmless. Only developers
need to care about them in order to optimize some parameters.
Let's just silence them to reduce these similar user reports.
Closes: https://github.com/openwrt/openwrt/issues/13148 Closes: https://github.com/openwrt/openwrt/issues/14422 Closes: https://github.com/openwrt/openwrt/issues/15959 Closes: https://github.com/openwrt/openwrt/issues/15997 Closes: https://github.com/openwrt/openwrt/issues/16896 Closes: https://github.com/openwrt/openwrt/issues/18046 Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/18368 Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 88234a03bc645d327016cc807c35972fcb6834eb)
[Apply to ath10k-ct 6.10] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fil Dunsky [Mon, 10 Mar 2025 23:57:43 +0000 (06:57 +0700)]
mediatek: filogic: add support for Huasifei WH3000
**Huasifei WH3000 eMMC / Fudy MT3000**
Portable Wi-Fi 6 travel router based on MediaTek MT7981A SoC.
MT7981B+MT7976CN+RTL8221B Dual Core 1.3GHZ
**Specifications**
SoC: Filogic 820 MT7981A (1.3GHz)
RAM: DDR4 1GB
Flash: eMMC 8GB
WiFi: 2.4GHz and 5GHz with 3 antennas
Ethernet:
1x WAN (10/100/1000M)
1x LAN (10/100/1000/2500M)
USB: 1x USB 3.0 port
Two buttons: power/reset and mode (BTN_0)
LEDS: blue, red, blue+red=pink
UART: 3.3V, TX, RX, GND / 115200 8N1
**Installation via U-Boot rescue**
1. Set static IP 192.168.1.2 on your computer and default route as 192.168.1.1
2. Connect to the WAN port and hold the reset button while booting the device.
3. Wait for the LED to blink 5 times, and release the reset button.
4. Open U-boot web page on your browser at http://192.168.1.1
5. Select the OpenWRT sysupgrade image, upload it, and start the upgrade.
6. Wait for the router to flash the new firmware.
7. Wait for the router to reboot itself.
**Installation via sysupgrade**
Just flash sysupgrade file via [LuCI upgrade page](http://192.168.1.1/cgi-bin/luci/admin/system/flash) without saving the settings.
**Installation via SSH**
Upload the file to the router `/tmp` directory, `ssh root@192.168.1.1` and issue a command:
```
sysupgrade -n /tmp/openwrt-mediatek-filogic-huasifei_wh3000-emmc-squashfs-sysupgrade.bin
```
**Factory MAC**
You can find your Factory MAC which is mentioned on the box at `/dev/mmcblck0p2` partition `factory` starting from `0x4`
```
dd if=/dev/mmcblk0p2 bs=1 skip=4 count=6 | hexdump -C
```
**Enlarging a partition**
Though device has 8GB eMMC, it uses only 2GB `/dev/mmcblck0p6` as `rootfs` for `/rom` and `/overlay` leaving `/dev/mmcblck0p7` as empty unused space.
```
sgdisk -p /dev/mmcblk0
```
```
Disk /dev/mmcblk0: 15269888 sectors, 7.3 GiB
Sector size (logical/physical): 512/512 bytes
Disk identifier (GUID): 2BD17853-102B-4500-AA1A-8A21D4D7984D
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 14942174
Partitions will be aligned on 1024-sector boundaries
Total free space is 11197 sectors (5.5 MiB)
You can fix that by loading into `initramfs-kernel`, deleting empty `mmcblck0p7` partition and resizing `mmcblck0p6`
```
sysupgrade -F /tmp/openwrt-initramfs-kernel.bin
```
Install and run cfdisk
```
opkg update && opkg install cfdisk
cfdisk /dev/mmcblck0
```
- Select `mmcblck0p7` -> Delete
- Select `mmcblck0p6` -> Resize -> Write -> yes -> Quit
You will not see any difference in `cat /proc/partitions` after that but just flash a `sysupgrade` and you'll get the whole 7.3GB space for the `/overlay`.
Installation
------------
1. Connect to the router using ssh (user: admin, pass: web interface
password)
2. Make mtd backup:
cat /dev/mtd0 | gzip -1 -c > /tmp/mtd0_spi0.0.bin.gz
cat /dev/mtd1 | gzip -1 -c > /tmp/mtd1_BL2.bin.gz
cat /dev/mtd2 | gzip -1 -c > /tmp/mtd2_u-boot-env.bin.gz
cat /dev/mtd3 | gzip -1 -c > /tmp/mtd3_Factory.bin.gz
cat /dev/mtd4 | gzip -1 -c > /tmp/mtd4_FIP.bin.gz
cat /dev/mtd5 | gzip -1 -c > /tmp/mtd5_ubi.bin.gz
3. Download mtd backup from the /tmp dir of the router to your PC using
scp protocol
4. Upload OpenWrt 'bl31-uboot.fip', 'preloader.bin' images to the /tmp
dir of the router using scp protocol
5. Write FIP and BL2 (replace bootloader):
mtd write /tmp/openwrt-mediatek-filogic-netis_nx31-bl31-uboot.fip FIP
mtd write /tmp/openwrt-mediatek-filogic-netis_nx31-preloader.bin BL2
6. Place OpenWrt
'openwrt-mediatek-filogic-netis_nx31-initramfs-recovery.itb' image on
the tftp server (IP: 192.168.1.254)
7. Erase 'ubi' partition and reboot the router:
mtd erase ubi
reboot
8. U-Boot automatically boot OpenWrt recovery image from tftp server to
the RAM
9. Upload OpenWrt 'sysupgrade.itb' image to the /tmp dir of the router
(IP: 192.168.1.1) using scp protocol
10. Connect to the router using ssh and run:
sysupgrade -n openwrt-mediatek-filogic-netis_nx31-squashfs-sysupgrade.itb
Return to stock
---------------
1. Unpack stock BL2 and FIP partitions backup
2. Upload stock BL2 and FIP partitions backup to the /tmp dir of the
router using scp protocol
3. Connect to the router using ssh and run:
apk update && apk add kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
mtd unlock BL2
mtd unlock FIP
4. Restore backup:
mtd write /tmp/mtd4_FIP.bin FIP
mtd write /tmp/mtd1_BL2.bin BL2
5. Erase ubi and reboot:
mtd erase ubi
reboot
6. Power off the router
7. Press Reset button and power on the router. Release the button after
~10 sec
8. Navigate to U-Boot recovery web server (http://192.168.1.1/) and
upload the OEM firmware
Recovery
--------
1. Place OpenWrt
'openwrt-mediatek-filogic-netis_nx31-initramfs-recovery.itb' image on
the tftp server (IP: 192.168.1.254)
2. Press “Reset” button and power on the router. After ~10 sec release
the button.
3. Use OpenWrt initramfs system for recovery
MAC addresses
-------------
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| LAN | dc:xx:xx:d1:xx:18 | label |
| WAN | dc:xx:xx:d1:xx:1a | label+2 |
| WLAN 2g | de:xx:xx:11:xx:19 | |
| WLAN 5g | de:xx:xx:71:xx:19 | |
+---------+-------------------+-----------+
The LAN MAC was found in 'Factory', 0x1fef20
The WAN MAC was found in 'Factory', 0x1fef26
The WLAN 2g/5g MAC prototype was found in 'Factory', 0x4
Adds latest 6.6 patches from the Raspberry Pi repository.
These patches were generated from:
https://github.com/raspberrypi/linux/commits/rpi-6.6.y/
With the following command:
git format-patch -N v6.6.85..HEAD
(HEAD -> bba53a117a4a5c29da892962332ff1605990e17a)
build: bpf: fix LLVM tool paths with host toolchain
Do not assume that the various tools like llc can be found under the
same path as clang; instead, look them up through BPF_PATH (while still
preferring ones found next to clang).
This fixes build in common setups with ccache, where clang resolves to a
path like /usr/lib/ccache/bin/clang, but no other tools can be found at
that location.
generic: qca8k: backport bridge port isolation support
Bridge port isolation offload support has been added to the bridge core
and many DSA drivers. mt7530 support was backported in OpenWrt commit c4e6a147a6c0 ("generic: 6.6: mt7530: add support for bridge port
isolation").
Install instructions:
The booloader will only install signed firmware so the image has to
be manually flashed.
- Set up a TFTP server on 192.168.1.0/24 to serve the initramfs image
- Interrupt the bootloader and run from RAM with
r 192.168.1.100:openwrt-bmips-bcm63268-actiontec_t1200h-initramfs.elf
- On the openwrt console, copy the wfi image using wget/tftp/scp, i.e
scp user@192.168.1.100:~/openwrt/bin/targets/bmips/bcm63268/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin /tmp/
- Erase half the flash partition where openwrt will be installed with
flash_erase -j /dev/mtd1 0 491
- Flash the openwrt image with
nandwrite -p /dev/mtd1 /tmp/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin
- Reboot
- Interrupt the bootloader again and use the c command to boot from
previous firmware if vendor image is loaded
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
[Minor improvements to DTS file] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 65b8a978deac05894d1fd20dfe63494f4b43848d)
Tim Harvey [Mon, 27 Jan 2025 22:44:27 +0000 (14:44 -0800)]
mac80211: ath11k: Fix DMA buffer allocation to resolve SWIOTLB issues
Backport two commits to resolve issues with ath1kk causing it to fail
driver registration on iommuless systems with DRAM outside of 32bit
addressing such as a 4GiB imx8mm:
commit 1bcd20981834 ("wifi: ath11k: Fix DMA buffer allocation
to resolve SWIOTLB issues")
commit eeadc6baf8b3 ("wifi: ath11k: Use dma_alloc_noncoherent
for rx_tid buffer allocation")
projects / thirdparty / openwrt.git / log
