ipmr: Always call ip{,6}_mr_forward() from RCU read-side critical section
These functions expect to be called from RCU read-side critical section,
but this only happens when invoked from the data path via
ip{,6}_mr_input(). They can also be invoked from process context in
response to user space adding a multicast route which resolves a cache
entry with queued packets [1][2].
Fix by adding missing rcu_read_lock() / rcu_read_unlock() in these call
paths.
Alex Elder [Tue, 13 Sep 2022 20:46:02 +0000 (15:46 -0500)]
net: ipa: properly limit modem routing table use
IPA can route packets between IPA-connected entities. The AP and
modem are currently the only such entities supported, and no routing
is required to transfer packets between them.
The number of entries in each routing table is fixed, and defined at
initialization time. Some of these entries are designated for use
by the modem, and the rest are available for the AP to use. The AP
sends a QMI message to the modem which describes (among other
things) information about routing table memory available for the
modem to use.
Currently the QMI initialization packet gives wrong information in
its description of routing tables. What *should* be supplied is the
maximum index that the modem can use for the routing table memory
located at a given location. The current code instead supplies the
total *number* of routing table entries. Furthermore, the modem is
granted the entire table, not just the subset it's supposed to use.
This patch fixes this. First, the ipa_mem_bounds structure is
generalized so its "end" field can be interpreted either as a final
byte offset, or a final array index. Second, the IPv4 and IPv6
(non-hashed and hashed) table information fields in the QMI
ipa_init_modem_driver_req structure are changed to be ipa_mem_bounds
rather than ipa_mem_array structures. Third, we set the "end" value
for each routing table to be the last index, rather than setting the
"count" to be the number of indices. Finally, instead of allowing
the modem to use all of a routing table's memory, it is limited to
just the portion meant to be used by the modem. In all versions of
IPA currently supported, that is IPA_ROUTE_MODEM_COUNT (8) entries.
Liang He [Tue, 13 Sep 2022 12:56:59 +0000 (20:56 +0800)]
of: mdio: Add of_node_put() when breaking out of for_each_xx
In of_mdiobus_register(), we should call of_node_put() for 'child'
escaped out of for_each_available_child_of_node().
Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Co-developed-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chris Wilson [Fri, 16 Sep 2022 09:24:03 +0000 (11:24 +0200)]
drm/i915/gem: Really move i915_gem_context.link under ref protection
i915_perf assumes that it can use the i915_gem_context reference to
protect its i915->gem.contexts.list iteration. However, this requires
that we do not remove the context from the list until after we drop the
final reference and release the struct. If, as currently, we remove the
context from the list during context_close(), the link.next pointer may
be poisoned while we are holding the context reference and cause a GPF:
v3: fix incorrect syntax of spin_lock() replacing spin_lock_irqsave()
v2: irqsave not required in a worker, neither conversion to irq safe
elsewhere (Tvrtko),
- perf: it's safe to call gen8_configure_context() even if context has
been closed, no need to check,
- drop unrelated cleanup (Andi, Tvrtko)
Reported-by: Mark Janes <mark.janes@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/issues/6222
References: a4e7ccdac38e ("drm/i915: Move context management under GEM") Fixes: f8246cf4d9a9 ("drm/i915/gem: Drop free_work for GEM contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit ad3aa7c31efa5a09b0dba42e66cfdf77e0db7dc2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Due to i915_perf assuming that it can use the i915_gem_context reference
to protect its i915->gem.contexts.list iteration, we need to defer removal
of the context from the list until last reference to the context is put.
However, there is a risk of triggering kernel warning on contexts list not
empty at driver release time if we deleagate that task to a worker for
i915_gem_context_release_work(), unless that work is flushed first.
Unfortunately, it is not flushed on driver release. Fix it.
Instead of additionally calling flush_workqueue(), either directly or via
a new dedicated wrapper around it, replace last call to
i915_gem_drain_freed_objects() with existing i915_gem_drain_workqueue()
that performs both tasks.
Dusty Mabe reported consistent hang during CoreOS shutdown with a MD
RAID1 setup. Although apparently similar hangs happened before,
and this patch most likely is not the root cause it made it much
more severe. Revert it until we can figure out what is going on
with the md driver.
gpio: mockup: fix NULL pointer dereference when removing debugfs
We now remove the device's debugfs entries when unbinding the driver.
This now causes a NULL-pointer dereference on module exit because the
platform devices are unregistered *after* the global debugfs directory
has been recursively removed. Fix it by unregistering the devices first.
Cong Wang [Mon, 12 Sep 2022 17:35:53 +0000 (10:35 -0700)]
tcp: read multiple skbs in tcp_read_skb()
Before we switched to ->read_skb(), ->read_sock() was passed with
desc.count=1, which technically indicates we only read one skb per
->sk_data_ready() call. However, for TCP, this is not true.
TCP at least has sk_rcvlowat which intentionally holds skb's in
receive queue until this watermark is reached. This means when
->sk_data_ready() is invoked there could be multiple skb's in the
queue, therefore we have to read multiple skbs in tcp_read_skb()
instead of one.
Fixes: 965b57b469a5 ("net: Introduce a new proto_ops ->read_skb()") Reported-by: Peilin Ye <peilin.ye@bytedance.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220912173553.235838-1-xiyou.wangcong@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: dsa: microchip: lan937x: fix maximum frame length check
Maximum frame length check is enabled in lan937x switch on POR, But it
is found to be disabled on driver during port setup operation. Due to
this, packets are not dropped when transmitted with greater than configured
value. For testing, setup made for lan1->lan2 transmission and configured
lan1 interface with a frame length (less than 1500 as mentioned in
documentation) and transmitted packets with greater than configured value.
Expected no packets at lan2 end, but packets observed at lan2.
Based on the documentation, packets should get discarded if the actual
packet length doesn't match the frame length configured. Frame length check
should be disabled only for cascaded ports due to tailtags.
This feature was disabled on ksz9477 series due to ptp issue, which is
not in lan937x series. But since lan937x took ksz9477 as base, frame
length check disabled here as well. Patch added to remove this portion
from port setup so that maximum frame length check will be active for
normal ports.
Beginning of the merge window we introduced the vfs{g,u}id_t types in b27c82e12965 ("attr: port attribute changes to new types") and changed
various codepaths over including chown_common().
During that change we forgot to account for the case were the passed
ownership value is -1. In this case the ownership fields in struct iattr
aren't initialized but we rely on them being initialized by the time we
generate the ownership to pass down to the LSMs. All the major LSMs
don't care about the ownership values at all. Only Tomoyo uses them and
so it took a while for syzbot to unearth this issue.
Fix this by initializing the ownership fields and do it within the
retry_deleg block. While notify_change() doesn't alter the ownership
fields currently we shouldn't rely on it.
Since no kernel has been released with these changes this does not
needed to be backported to any stable kernels.
Randy Dunlap [Tue, 31 May 2022 02:55:57 +0000 (19:55 -0700)]
drm/hisilicon: Add depends on MMU
The Kconfig symbol depended on MMU but was dropped by the commit acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu")
because it already had as a dependency ARM64 that already selects MMU.
But later, commit a0f25a6bb319 ("drm/hisilicon/hibmc: Allow to be built
if COMPILE_TEST is enabled") allowed the driver to be built for non-ARM64
when COMPILE_TEST is set but that could lead to unmet direct dependencies
and linking errors.
Prevent a kconfig warning when MMU is not enabled by making
DRM_HISI_HIBMC depend on MMU.
Fixes: acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: John Stultz <jstultz@google.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220531025557.29593-1-rdunlap@infradead.org
G200ER does not seem to support 24 bpp, so force the console to
use 32 bpp. The problem got introduced when commit 73f54d5d9682
("drm/mgag200: Remove special case for G200SE with <2 MiB") changed
the preferred color depth from 32 bit to 24 bit.
A setting of 24 is the correct color depth, but G200ER doesn't seem
to be able to use the respective RGB888 color format. Using 24-bit
color with forced 32 bpp works around the problem.
Reported-by: Wang Yugui <wangyugui@e16-tech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Wang Yugui <wangyugui@e16-tech.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: 73f54d5d9682 ("drm/mgag200: Remove special case for G200SE with <2 MiB") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220915150348.31504-1-tzimmermann@suse.de
Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.
GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.
bnxt_en: fix flags to check for supported fw version
The warning message of unsupported FW appears every time RX timestamps
are disabled on the interface. The patch fixes the flags to correct set
for the check.
Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220915234932.25497-1-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 20 Sep 2022 01:17:22 +0000 (18:17 -0700)]
Merge tag 'wireless-2022-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.0
Late stage fixes for v6.0. Temporarily mark iwlwifi's mei code broken
as it breaks suspend for iwd users and also don't spam nss trimming
messages. mt76 has fixes for aggregation sequence numbers and a
regression related to the VHT extended NSS BW feature.
* tag 'wireless-2022-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
wifi: mt76: fix reading current per-tid starting sequence number for aggregation
wifi: iwlwifi: Mark IWLMEI as broken
wifi: iwlwifi: don't spam logs with NSS>2 messages
====================
Jakub Kicinski [Tue, 20 Sep 2022 01:13:43 +0000 (18:13 -0700)]
Merge tag 'batadv-net-pullrequest-20220916' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- Fix hang up with small MTU hard-interface, by Shigeru Yoshida
* tag 'batadv-net-pullrequest-20220916' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix hang up with small MTU hard-interface
====================
sfc: fix null pointer dereference in efx_hard_start_xmit
Trying to get the channel from the tx_queue variable here is wrong
because we can only be here if tx_queue is NULL, so we shouldn't
dereference it. As the above comment in the code says, this is very
unlikely to happen, but it's wrong anyway so let's fix it.
I hit this issue because of a different bug that caused tx_queue to be
NULL. If that happens, this is the error message that we get here:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
Fixes: 12804793b17c ("sfc: decouple TXQ type from label") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220914111135.21038-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sfc: fix TX channel offset when using legacy interrupts
In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but
that's not correct if efx_sepparate_tx_channels is false. In that case,
the offset is 0 because the tx queues are in the single existing channel
at index 0, together with the rx queue.
Without this fix, as soon as you try to send any traffic, it tries to
get the tx queues from an uninitialized channel getting these errors:
WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
Fixes: c308dfd1b43e ("sfc: fix wrong tx channel offset with efx_separate_tx_channels") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220914103648.16902-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 20 Sep 2022 01:01:04 +0000 (18:01 -0700)]
Merge tag 'for-net-2022-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix HCIGETDEVINFO regression
* tag 'for-net-2022-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix HCIGETDEVINFO regression
====================
Lorenzo Bianconi [Tue, 13 Sep 2022 13:03:05 +0000 (15:03 +0200)]
net: ethernet: mtk_eth_soc: enable XDP support just for MT7986 SoC
Disable page_pool/XDP support for MT7621 SoC in order fix a regression
introduce adding XDP for MT7986 SoC. There is no a real use case for XDP
on MT7621 since it is a low-end cpu. Moreover this patch reduces the
memory footprint.
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/2bf31e27b888c43228b0d84dd2ef5033338269e2.1663074002.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per GDMA spec, rmb is necessary after checking owner_bits, before
reading EQ or CQ entries.
Add rmb in these two places to comply with the specs.
Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Reported-by: Sinan Kaya <Sinan.Kaya@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1662928805-15861-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michal Jaron [Thu, 1 Sep 2022 07:49:33 +0000 (09:49 +0200)]
i40e: Fix set max_tx_rate when it is lower than 1 Mbps
While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Michal Jaron [Tue, 13 Sep 2022 13:38:36 +0000 (15:38 +0200)]
i40e: Fix VF set max MTU size
Max MTU sent to VF is set to 0 during memory allocation. It cause
that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not
depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform
VF in GET_VF_RESOURCES msg what size should be max frame.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Michal Jaron [Tue, 13 Sep 2022 13:38:35 +0000 (15:38 +0200)]
iavf: Fix set max MTU size with port VLAN and jumbo frames
After setting port VLAN and MTU to 9000 on VF with ice driver there
was an iavf error
"PF returned error -5 (IAVF_ERR_PARAM) to our request 6".
During queue configuration, VF's max packet size was set to
IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN
due to making some space for port VLAN as VF is not aware whether it's
in a port VLAN. This mismatch in sizes caused ice to reject queue
configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF
to VF with GET_VF_RESOURCES msg but VF does not look at this.
In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu
received from pf with GET_VF_RESOURCES msg to make vf's
max_frame_size dependent from pf. Add check if received max_mtu is
not in eligible range then set it to IAVF_MAX_RXBUFFER.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
David Thompson [Fri, 2 Sep 2022 16:42:47 +0000 (12:42 -0400)]
mlxbf_gige: clear MDIO gateway lock after read
The MDIO gateway (GW) lock in BlueField-2 GIGE logic is
set after read. This patch adds logic to make sure the
lock is always cleared at the end of each MDIO transaction.
Fix bad page state, free inappropriate page in handling dummy
descriptor. iavf_build_skb now has to check not only if rx_buffer is
NULL but also if size is zero, same thing in iavf_clean_rx_irq.
Without this patch driver would free page that will be used
by napi_build_skb.
Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use READ_ONCE_NOCHECK() when reading the stack to prevent KASAN splats
when dump_stack() is used.
Fixes: 5b301409e8bc5d7fad ("UML: add support for KASAN under x86_64") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
OpenWrt's UML with 5.15 was producing odd errors/warnings during preinit
part of the early userspace portion:
|[ 0.000000] Kernel command line: ubd0=root.img root=98:0 console=tty
|[...]
|[ 0.440000] random: jshn: uninitialized urandom read (4 bytes read)
|[ 0.460000] random: jshn: uninitialized urandom read (4 bytes read)
|/etc/preinit: line 47: can't create /dev/tty: No such device or address
|/etc/preinit: line 48: can't create /dev/tty: No such device or address
|/etc/preinit: line 58: can't open /dev/tty: No such device or address
|[...] repeated many times
That "/dev/tty" came from the command line (which is automatically
added if no console= parameter was specified for the uml binary).
The TLDP project tells the following about the /dev/tty:
<https://tldp.org/HOWTO/Text-Terminal-HOWTO-7.html#ss7.3>
| /dev/tty stands for the controlling terminal (if any) for the current
| process.[...]
| /dev/tty is something like a link to the actually terminal device[..]
The "(if any)" is important here, since it's possible for processes to
not have a controlling terminal.
I think this was a simple typo and the author wanted tty0 there.
CC: Thomas Meyer <thomas@m3y3r.de> Fixes: d7ffac33631b ("um: stdio_console: Make preferred console") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
Lukas Straub [Fri, 26 Aug 2022 15:29:31 +0000 (15:29 +0000)]
um: Cleanup compiler warning in arch/x86/um/tls_32.c
arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.
Remove the checks to silence these warnings.
../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
68 | if (!t->arch.tls_array)
| ^
In file included from ../arch/x86/um/asm/processor.h:10,
from ../include/linux/rcupdate.h:30,
from ../include/linux/rculist.h:11,
from ../include/linux/pid.h:5,
from ../include/linux/sched.h:14,
from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
243 | if (!t->arch.tls_array)
| ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
Signed-off-by: Lukas Straub <lukasstraub2@web.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Richard Weinberger <richard@nod.at>
Martin Povišer [Mon, 19 Sep 2022 17:34:53 +0000 (19:34 +0200)]
ASoC: tas2770: Reinit regcache on reset
On probe of the ASoC component, the device is reset but the regcache is
retained. This means the regcache gets out of sync if the codec is
rebound to a sound card for a second time. Fix it by reinitializing the
regcache to defaults after the device is reset.
ASoC: nau8824: Fix semaphore is released unexpectedly
On resuming, we anticipate that the jack is detected before playback
or capture. Therefore, we use semaphore to control the jack detection
done without any bothering. During booting, the driver launches jack
detection and releases the semaphore. However, it doesn't perceive the
maniputation of semaphore is not like resuming procedure. This makes
the semaphore's count value become to 2. There is more than one thread
can enter into the critical section. This may get unexpected situation
and make some chaos.
KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base
With commit 0c24e061196c ("mm: kmemleak: add rbtree and store physical
address for objects allocated with PA"), kmemleak started to put the
objects allocated with physical address onto object_phys_tree_root tree.
The kmemleak_free_part() therefore no longer worked as expected on
physically allocated objects (hyp_mem_base in this case) as it attempted to
search and remove things in object_tree_root tree.
Fix it by using kmemleak_free_part_phys() to unregister hyp_mem_base. This
fixes an immediate crash when booting a KVM host in protected mode with
kmemleak enabled.
Stefan Haberland [Mon, 19 Sep 2022 15:49:31 +0000 (17:49 +0200)]
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held.
Cc: <stable@vger.kernel.org> # 2.6.25+ Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
MIPS: Loongson32: Fix PHY-mode being left unspecified
commit 0060c8783330 ("net: stmmac: implement support for passive mode
converters via dt") has changed the plat->interface field semantics from
containing the PHY-mode to specifying the MAC-PCS interface mode. Due to
that the loongson32 platform code will leave the phylink interface
uninitialized with the PHY-mode intended by the means of the actual
platform setup. The commit-author most likely has just missed the
arch-specific code to fix. Let's mend the Loongson32 platform code then by
assigning the PHY-mode to the phy_interface field of the STMMAC platform
data.
Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
mm/slab_common: fix possible double free of kmem_cache
When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu'
kunit test case cause a use-after-free error:
BUG: KASAN: use-after-free in kobject_del+0x14/0x30
Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261
CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_address_description.constprop.0+0x87/0x2a5
print_report+0x103/0x1ed
kasan_report+0xb7/0x140
kobject_del+0x14/0x30
kmem_cache_destroy+0x130/0x170
test_exit+0x1a/0x30
kunit_try_run_case+0xad/0xc0
kunit_generic_run_threadfn_adapter+0x26/0x50
kthread+0x17b/0x1b0
</TASK>
The cause is inside kmem_cache_destroy():
kmem_cache_destroy
acquire lock/mutex
shutdown_cache
schedule_work(kmem_cache_release) (if RCU flag set)
release lock/mutex
kmem_cache_release (if RCU flag not set)
In some certain timing, the scheduled work could be run before
the next RCU flag checking, which can then get a wrong value
and lead to double kmem_cache_release().
Fix it by caching the RCU flag inside protected area, just like 'refcnt'
Fixes: 0495e337b703 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock") Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
During the code change to add the support for devres-managed card
instance, we put an explicit kfree(card) call at the error path in
snd_card_new(). This is needed for the early error path before the
card is initialized with the device, but is rather superfluous and
causes a double-free at the error path after the card instance is
initialized, as the destructor of the card object already contains a
kfree() call.
This patch fixes the double-free situation by removing the superfluous
kfree(). Meanwhile we need to call kfree() explicitly for the early
error path, so it's added there instead.
fpga: m10bmc-sec: Fix possible memory leak of flash_buf
There is an error check following the allocation of flash_buf that returns
without freeing flash_buf. It makes more sense to do the error check
before the allocation and the reordering eliminates the memory leak.
Merge tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some small parisc architecture fixes for 6.0-rc6:
One patch lightens up a previous commit and thus unbreaks building the
debian kernel, which tries to configure a 64-bit kernel with the
ARCH=parisc environment variable set.
The other patches fixes asm/errno.h includes in the tools directory
and cleans up memory allocation in the iosapic driver.
Summary:
- Allow configuring 64-bit kernel with ARCH=parisc
- Fix asm/errno.h includes in tools directory for parisc and xtensa
- Clean up iosapic memory allocation
- Minor typo and spelling fixes"
* tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Allow CONFIG_64BIT with ARCH=parisc
parisc: remove obsolete manual allocation aligning in iosapic
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
Input: hp_sdc: fix spelling typo in comment
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
Merge tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Nothing really major here, but figured it'd be nicer to just get these
flushed out for -rc6 so that the 6.1 branch will have them as well.
That'll make our lives easier going forward in terms of development,
and avoid trivial conflicts in this area.
- Simple trace rename so that the returned opcode name is consistent
with the enum definition (Stefan)
- Send zc rsrc request vs notification lifetime fix (Pavel)"
* tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux:
io_uring/opdef: rename SENDZC_NOTIF to SEND_ZC
io_uring/net: fix zc fixed buf lifetime
i2c: mlxbf: incorrect base address passed during io write
Correct the base address used during io write.
This bug had no impact over the overall functionality of the read and write
transactions. MLXBF_I2C_CAUSE_OR_CLEAR=0x18 so writing to (smbus->io + 0x18)
instead of (mst_cause->ioi + 0x18) actually writes to the sc_low_timeout
register which just sets the timeout value before a read/write aborts.
We could make the T-Head CMOs depend on a new-enough assembler to have
Zicbom, but it's not strictly necessary because the T-Head CMOs
circumvent the assembler.
Al Viro [Fri, 24 Sep 2021 01:55:27 +0000 (01:55 +0000)]
riscv: fix a nasty sigreturn bug...
riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix
really nasty sigreturn bug"); if signal gets caught by an interrupt that
hits when we have the right value in a0 (-513), *and* another signal
gets delivered upon sigreturn() (e.g. included into the blocked mask for
the first signal and posted while the handler had been running), the
syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are
in a syscall, after all) and a0 already restored to its original value
(-513, which happens to be -ERESTARTNOINTR) and assume that we need to
apply the usual syscall restart logics.
Both basic extensions of SVPBMT and ZICBOM depend on CONFIG_MMU.
Make the T-Head errata implementations of the similar functionality
also depend on it to prevent build errors.
RISCV_ISA_SVPBMT selects RISCV_ALTERNATIVE which depends on !XIP_KERNEL.
Therefore RISCV_ISA_SVPBMT should also depend on !XIP_KERNEL so
quieten this kconfig warning:
WARNING: unmet direct dependencies detected for RISCV_ALTERNATIVE
Depends on [n]: !XIP_KERNEL [=y]
Selected by [y]:
- RISCV_ISA_SVPBMT [=y] && 64BIT [=y] && MMU [=y]
kasan: call kasan_malloc() from __kmalloc_*track_caller()
We were failing to call kasan_malloc() from __kmalloc_*track_caller()
which was causing us to sometimes fail to produce KASAN error reports
for allocations made using e.g. devm_kcalloc(), as the KASAN poison was
not being initialized. Fix it.
Merge tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the level-low interrupt type support in gpio-mpc8xxx
- convert another two drivers to using immutable irq chips
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mt7621: Make the irqchip immutable
gpio: ixp4xx: Make irqchip immutable
MAINTAINERS: Update HiSilicon GPIO Driver maintainer
gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
Wolfram Sang [Mon, 12 Sep 2022 20:58:43 +0000 (21:58 +0100)]
MAINTAINERS: remove Nehal Shah from AMD MP2 I2C DRIVER
His email bounced and given commit 88115ea6308d ("HID: amd_sfh: Remove
name from maintainers list"), I assume he is no longer available as a
maintainer.
Johan Hovold [Fri, 16 Sep 2022 09:36:03 +0000 (11:36 +0200)]
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
The size of the UFS PHY serdes register region is 0x1c4 and the
corresponding 'reg' property should specifically not include the
adjacent regions that are defined in the child node (e.g. tx and rx).
Peilin Ye [Thu, 8 Sep 2022 23:15:23 +0000 (16:15 -0700)]
tcp: Use WARN_ON_ONCE() in tcp_read_skb()
Prevent tcp_read_skb() from flooding the syslog.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jaroslav Kysela [Tue, 13 Sep 2022 07:02:16 +0000 (09:02 +0200)]
ALSA: hda/hdmi: Fix the converter reuse for the silent stream
When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.
If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.
Merge tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes for -rc6:
- Fix a mixup of sectors and bytes in the secure erase ioctl
(Mikulas)
- Fix for a bad return value for a non-blocking bio/blk queue enter
call (me)"
* tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
blk-lib: fix blkdev_issue_secure_erase
block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
Merge tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small patches:
- Fix using an unsigned type for the return value, introduced in this
release (Pavel)
- Stable fix for a missing check for a fixed file on put (me)"
* tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
io_uring/msg_ring: check file type before putting
io_uring/rw: fix error'ed retry return values
Merge tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the regular drm fixes pull.
The i915 and misc fixes are fairly regular, but the amdgpu contains
fixes for new hw blocks, the dcn314 specific path hookups and also has
a bunch of fixes for clang stack size warnings which are a bit churny
but fairly straightforward. This means it looks a little larger than
usual.
amdgpu:
- BACO fixes for some RDNA2 boards
- PCI AER fixes uncovered by a core PCI change
- Properly hook up dirtyfb helper
- RAS fixes for GC 11.x
- TMR fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- LLVM DML stack size fixes
i915:
- Revert a display patch around max DP source rate now that the
proper WaEdpLinkRateDataReload is in place
- Fix perf limit reasons bit position
- Fix unclaimmed mmio registers on suspend flow with GuC
- A vma_move_to_active fix for a regression with video decoding
- DP DSP fix
gma500:
- Locking and IRQ fixes
meson:
- OSD1 display fixes
panel-edp:
- Fix Innolux timings
rockchip:
- DP/HDMI fixes"
* tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu: make sure to init common IP before gmc
drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega
drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega
drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage
drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport()
drm/amd/display: Refactor SubVP calculation to remove FPU
drm/amd/display: Limit user regamma to a valid value
drm/amd/display: add workaround for subvp cursor corruption for DCN32/321
drm/amd/display: SW cursor fallback for SubVP
drm/amd/display: Round cursor width up for MALL allocation
drm/amd/display: Correct dram channel width for dcn314
drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314
drm/amd/display: Hook up DCN314 specific dml implementation
drm/amd/display: Enable dlg and vba compilation for dcn314
drm/amd/display: Fix compilation errors on DCN314
drm/amd/display: Fix divide by zero in DML
...
Merge tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four smb3 fixes for stable:
- important fix to revalidate mapping when doing direct writes
- missing spinlock
- two fixes to socket handling
- trivial change to update internal version number for cifs.ko"
* tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: add missing spinlock around tcon refcount
cifs: always initialize struct msghdr smb_msg completely
cifs: don't send down the destination address to sendmsg for a SOCK_STREAM
cifs: revalidate mapping when doing direct writes
David S. Miller [Fri, 16 Sep 2022 13:34:01 +0000 (14:34 +0100)]
Merge branch 'net-unsync-addresses-from-ports'
From: Benjamin Poirier <bpoirier@nvidia.com>
To: netdev@vger.kernel.org Cc: Jay Vosburgh <j.vosburgh@gmail.com>,
Veaceslav Falico <vfalico@gmail.com>,
Andy Gospodarek <andy@greyhouse.net>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Jiri Pirko <jiri@resnulli.us>, Shuah Khan <shuah@kernel.org>,
Jonathan Toppins <jtoppins@redhat.com>,
linux-kselftest@vger.kernel.org
Subject: [PATCH net v3 0/4] Unsync addresses from ports when stopping aggregated devices
Date: Wed, 7 Sep 2022 16:56:38 +0900 [thread overview]
Message-ID: <20220907075642.475236-1-bpoirier@nvidia.com> (raw)
This series fixes similar problems in the bonding and team drivers.
Because of missing dev_{uc,mc}_unsync() calls, addresses added to
underlying devices may be leftover after the aggregated device is deleted.
Add the missing calls and a few related tests.
v2:
* fix selftest installation, see patch 3
v3:
* Split lacpdu_multicast changes to their own patch, #1
* In ndo_{add,del}_slave methods, only perform address list changes when
the aggregated device is up (patches 2 & 3)
* Add selftest function related to the above change (patch 4)
====================
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.
Add unsync calls at their expected location, team_close().
v3:
* When adding or deleting a port, only sync/unsync addresses if the team
device is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former bond
slaves after a bond has been deleted; see test_LAG_cleanup() in the last
patch in this series.
Add unsync calls, via bond_hw_addr_flush(), at their expected location,
bond_close().
Add dev_mc_add() call to bond_open() to match the above change.
v3:
* When adding or deleting a slave, only sync/unsync, add/del addresses if
the bond is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: marvell: prestera: add support for for Aldrin2
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
V2:
- retarget to net tree instead of net-next;
- fix missed colon in patch subject ('net marvell' vs 'net: mavell'); Signed-off-by: David S. Miller <davem@davemloft.net>
net/ieee802154: fix uninit value bug in dgram_sendmsg
There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.
We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.
Also fixed in raw_bind, dgram_bind, dgram_connect.
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Fri, 16 Sep 2022 07:49:46 +0000 (17:49 +1000)]
Merge tag 'drm-intel-fixes-2022-09-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Revert a display patch around max DP source rate now
that the proper WaEdpLinkRateDataReload is in place. (Ville)
- Fix perf limit reasons bit position. (Ashutosh)
- Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh)
- A vma_move_to_active fix for a regression with video decoding. (Nirmoy)
- DP DSP fix. (Ankit)
Rafael Mendonca [Wed, 14 Sep 2022 02:49:24 +0000 (23:49 -0300)]
scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()
Commit 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG")
made the __qlt_24xx_handle_abts() function return early if
tcm_qla2xxx_find_cmd_by_tag() didn't find a command, but it missed to clean
up the allocated memory for the management command.
Link: https://lore.kernel.org/r/20220914024924.695604-1-rafaelmendsr@gmail.com Fixes: 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Letu Ren [Fri, 12 Nov 2021 12:06:41 +0000 (20:06 +0800)]
scsi: qedf: Fix a UAF bug in __qedf_probe()
In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.
There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.
Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Co-developed-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 9a073d4fbb18 ("soc: bcm: brcmstb: biuctrl: Add missing
of_node_put()") added what was thought to be a missing of_node_put() but
now causes a double of_node_put() to be called, once from
setup_hifcpubiuctrl_regs() and another time from brcmstb_biuctrl_init().
Ensure that setup_hifcpubiuctrl_regs() is not calling of_node_put()
since it is not obvious it does that on one of its parameters.
If we're invoked with a fixed file, follow the normal rules of not
calling io_fput_file(). Fixed files are permanently registered to the
ring, and do not need putting separately.
Cc: stable@vger.kernel.org Fixes: aa184e8671f0 ("io_uring: don't attempt to IOPOLL for MSG_RING requests") Signed-off-by: Jens Axboe <axboe@kernel.dk>
Luke D. Jones [Thu, 15 Sep 2022 08:09:21 +0000 (20:09 +1200)]
ALSA: hda/realtek: Add quirk for ASUS GA503R laptop
The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
Just as with the 5570 (and the other Dell laptops), this enables the two
subwoofer speakers on the Dell Precision 5530 together with the main
ones, significantly increasing the audio quality. I've tested this
myself on a 5530 and can confirm it's working as expected.
Merge tag 'imx-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.0, 2nd round:
- A couple of TQMa8MPQL device tree fixes from Alexander Stein on button
GPIOs and PCF85063 RTC alarm pinctrl.
- Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix
build errors when this SoM dtsi is included on customer carrier boards.
- Remove GPU power domain reset from i.MX8MN device tree to fix
a sporadical hang seen with GPUMIX powering up.
- Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo
board.
- Add ARCH_NXP back to defconfig, which was dropped accidentally by
commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms
together").
- Add missing #reset-cells for i.MX8ULP PCC clock controllers.
- Update PMIC voltages for imx8mm-verdin board to fix an issue with one
Toradex SKU that uses a consumer-grade chip that is capable of going up
to 1.8GHz at 1.00V.
- A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey
to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and
phy-mode.
* tag 'imx-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
arm64: defconfig: enable ARCH_NXP
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
arm64: dts: imx8mm-verdin: extend pmic voltages
arm64: dts: imx8ulp: add #reset-cells for pcc
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mn: remove GPU power domain reset
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
Merge tag 'thunderbolt-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
"thunderbolt: Fix for v6.0-rc6
This includes a single commit adding missing PCI ID for Intel Maple
Ridge Thunderbolt 4 single port controller.
This has been in linux-next with no reported issues."
* tag 'thunderbolt-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add support for Intel Maple Ridge single port controller
projects / people / ms / linux.git / log
