Eric Farman [Thu, 28 Jul 2022 20:49:14 +0000 (22:49 +0200)]
vfio/ccw: Check return code from subchannel quiesce
If a subchannel is busy when a close is performed, the subchannel
needs to be quiesced and left nice and tidy, so nothing unexpected
(like a solicited interrupt) shows up while in the closed state.
Unfortunately, the return code from this call isn't checked,
so any busy subchannel is treated as a failing one.
Fix that, so that the close on a busy subchannel happens normally.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220728204914.2420989-4-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 28 Jul 2022 20:49:13 +0000 (22:49 +0200)]
vfio/ccw: Remove FSM Close from remove handlers
Now that neither vfio_ccw_sch_probe() nor vfio_ccw_mdev_probe()
affect the FSM state, it doesn't make sense for their _remove()
counterparts try to revert things in this way. Since the FSM open
and close are handled alongside MDEV open/close, these are
unnecessary.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220728204914.2420989-3-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 28 Jul 2022 20:49:12 +0000 (22:49 +0200)]
vfio/ccw: Add length to DMA_UNMAP checks
As pointed out with the simplification of the
VFIO_IOMMU_NOTIFY_DMA_UNMAP notifier [1], the length
parameter was never used to check against the pinned
pages.
Let's correct that, and see if a page is within the
affected range instead of simply the first page of
the range.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220728204914.2420989-2-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
SPI NOR core changes:
- move SECT_4K_PMC flag out of the core as it's a vendor specific flag
- s/addr_width/addr_nbytes: address width means the number of IO lines
used for the address, whereas in the code it is used as the number of
address bytes.
- do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing
time we should not change members of struct spi_nor, but instead fill
members of struct spi_nor_flash_parameters which could later on be used
by the callers.
- track flash's internal address mode so that we can use 4B opcodes
together with opcodes that don't have a 4B opcode correspondent.
SPI NOR manufacturer drivers changes:
- esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".
- micron-st: Skip FSR reading if SPI controller does not support it to
allow flashes that support FSR to work even when attached to such SPI
controllers.
- spansion: Add s25hl-t/s25hs-t IDs and fixups.
net: txgbe: Fix an error handling path in txgbe_probe()
A pci_enable_pcie_error_reporting() should be balanced by a corresponding
pci_disable_pcie_error_reporting() call in the error handling path, as
already done in the remove function.
* tag 'perf-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/ibs: Add new IBS register bits into header
perf/x86/intel: Fix PEBS data source encoding for ADL
perf/x86/intel: Fix PEBS memory access info encoding for ADL
perf/core: Add a new read format to get a number of lost samples
perf/x86/amd/uncore: Add PerfMonV2 RDPMC assignments
perf/x86/amd/uncore: Add PerfMonV2 DF event format
perf/x86/amd/uncore: Detect available DF counters
perf/x86/amd/uncore: Use attr_update for format attributes
perf/x86/amd/uncore: Use dynamic events array
x86/events/intel/ds: Enable large PEBS for PERF_SAMPLE_WEIGHT_TYPE
Documentation: devlink: add add devlink-selftests to the table of contents
Commit 08f588fa301bef ("devlink: introduce framework for selftests") adds
documentation for devlink selftests framework, but it is missing from
table of contents.
Linus Torvalds [Mon, 1 Aug 2022 19:15:27 +0000 (12:15 -0700)]
Merge tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*()
primitives that can lose the lock_type & cause false reports. No
such mishap was observed in the wild.
- jump_label improvements: simplify the cross-arch support of initial
NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous"
* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix lockdep_init_map_*() confusion
jump_label: make initial NOP patching the special case
jump_label: mips: move module NOP patching into arch code
jump_label: s390: avoid pointless initial NOP patching
Dan Carpenter [Mon, 1 Aug 2022 10:20:12 +0000 (13:20 +0300)]
cxl/region: prevent underflow in ways_to_cxl()
The "ways" variable comes from the user. The ways_to_cxl() function
has an upper bound but it doesn't check for negatives. Make
the "ways" variable an unsigned int to fix this bug.
Fixes: 80d10a6cee05 ("cxl/region: Add interleave geometry attributes") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yueo3NV2hFCXx1iV@kili
[djbw: fixup interleave_ways_store() to only accept unsigned input] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Carpenter [Mon, 1 Aug 2022 10:19:27 +0000 (13:19 +0300)]
cxl/region: uninitialized variable in alloc_hpa()
This should check "p->res" instead of "res" (which is uninitialized).
Fixes: 23a22cd1c98b ("cxl/region: Allocate HPA capacity to regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yueor88I/DkVSOtL@kili Signed-off-by: Dan Williams <dan.j.williams@intel.com>
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
In the case of sk->dccps_qpolicy == DCCPQ_POLICY_PRIO, dccp_qpolicy_full
will drop a skb when qpolicy is full. And the lock in dccp_sendmsg is
released before sock_alloc_send_skb and then relocked after
sock_alloc_send_skb. The following conditions may lead dccp_qpolicy_push
to add skb to an already full sk_write_queue:
thread1--->lock
thread1--->dccp_qpolicy_full: queue is full. drop a skb
thread1--->unlock
thread2--->lock
thread2--->dccp_qpolicy_full: queue is not full. no need to drop.
thread2--->unlock
thread1--->lock
thread1--->dccp_qpolicy_push: add a skb. queue is full.
thread1--->unlock
thread2--->lock
thread2--->dccp_qpolicy_push: add a skb!
thread2--->unlock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
The prototype of input features of ionic_set_nic_features() is
netdev_features_t, but the vlan_flags is using the private
definition of ionic drivers. It should use the variable
ctx.cmd.lif_setattr.features, rather than features to check
the vlan flags. So fixes it.
Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
vsi->current_netdev_flags is used store the current net device
flags, not the active netdevice features. So it should use
vsi->netdev->featurs, rather than vsi->current_netdev_flags
to check NETIF_F_HW_VLAN_CTAG_FILTER.
Fixes: 1babaf77f49d ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nfp: flower: add support for tunnel offload without key ID
Currently nfp driver will reject to offload tunnel key action without
tunnel key ID which means tunnel ID is 0. But it is a normal case for tc
flower since user can setup a tunnel with tunnel ID is 0.
So we need to support this case to accept tunnel key action without
tunnel key ID.
Eric Dumazet [Fri, 29 Jul 2022 09:12:32 +0000 (09:12 +0000)]
net: rose: fix netdev reference changes
Bernard reported that trying to unload rose module would lead
to infamous messages:
unregistered_netdevice: waiting for rose0 to become free. Usage count = xx
This patch solves the issue, by making sure each socket referring to
a netdevice holds a reference count on it, and properly releases it
in rose_release().
rose_dev_first() is also fixed to take a device reference
before leaving the rcu_read_locked section.
Following patch will add ref_tracker annotations to ease
future bug hunting.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 1 Aug 2022 18:49:06 +0000 (11:49 -0700)]
Merge tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Load-balancing improvements:
- Improve NUMA balancing on AMD Zen systems for affine workloads.
- Improve the handling of reduced-capacity CPUs in load-balancing.
- Energy Model improvements: fix & refine all the energy fairness
metrics (PELT), and remove the conservative threshold requiring 6%
energy savings to migrate a task. Doing this improves power
efficiency for most workloads, and also increases the reliability
of energy-efficiency scheduling.
- Optimize/tweak select_idle_cpu() to spend (much) less time
searching for an idle CPU on overloaded systems. There's reports of
several milliseconds spent there on large systems with large
workloads ...
[ Since the search logic changed, there might be behavioral side
effects. ]
- Improve NUMA imbalance behavior. On certain systems with spare
capacity, initial placement of tasks is non-deterministic, and such
an artificial placement imbalance can persist for a long time,
hurting (and sometimes helping) performance.
The fix is to make fork-time task placement consistent with runtime
NUMA balancing placement.
Note that some performance regressions were reported against this,
caused by workloads that are not memory bandwith limited, which
benefit from the artificial locality of the placement bug(s). Mel
Gorman's conclusion, with which we concur, was that consistency is
better than random workload benefits from non-deterministic bugs:
"Given there is no crystal ball and it's a tradeoff, I think
it's better to be consistent and use similar logic at both fork
time and runtime even if it doesn't have universal benefit."
- Improve core scheduling by fixing a bug in
sched_core_update_cookie() that caused unnecessary forced idling.
- Improve wakeup-balancing by allowing same-LLC wakeup of idle CPUs
for newly woken tasks.
- Fix a newidle balancing bug that introduced unnecessary wakeup
latencies.
ABI improvements/fixes:
- Do not check capabilities and do not issue capability check denial
messages when a scheduler syscall doesn't require privileges. (Such
as increasing niceness.)
- Add forced-idle accounting to cgroups too.
- Fix/improve the RSEQ ABI to not just silently accept unknown flags.
(No existing tooling is known to have learned to rely on the
previous behavior.)
- Depreciate the (unused) RSEQ_CS_FLAG_NO_RESTART_ON_* flags.
Optimizations:
- Optimize & simplify leaf_cfs_rq_list()
- Micro-optimize set_nr_{and_not,if}_polling() via try_cmpxchg().
Misc fixes & cleanups:
- Fix the RSEQ self-tests on RISC-V and Glibc 2.35 systems.
- Fix a full-NOHZ bug that can in some cases result in the tick not
being re-enabled when the last SCHED_RT task is gone from a
runqueue but there's still SCHED_OTHER tasks around.
- Various PREEMPT_RT related fixes.
- Misc cleanups & smaller fixes"
* tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
rseq: Kill process when unknown flags are encountered in ABI structures
rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flags
sched/core: Fix the bug that task won't enqueue into core tree when update cookie
nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()
sched/core: Always flush pending blk_plug
sched/fair: fix case with reduced capacity CPU
sched/core: Use try_cmpxchg in set_nr_{and_not,if}_polling
sched/core: add forced idle accounting for cgroups
sched/fair: Remove the energy margin in feec()
sched/fair: Remove task_util from effective utilization in feec()
sched/fair: Use the same cpumask per-PD throughout find_energy_efficient_cpu()
sched/fair: Rename select_idle_mask to select_rq_mask
sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()
sched/fair: Decay task PELT values during wakeup migration
sched/fair: Provide u64 read for 32-bits arch helper
sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg
sched: only perform capability check on privileged operation
sched: Remove unused function group_first_cpu()
sched/fair: Remove redundant word " *"
selftests/rseq: check if libc rseq support is registered
...
Linus Torvalds [Mon, 1 Aug 2022 18:46:58 +0000 (11:46 -0700)]
Merge tag 'slab-for-5.20_or_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- An addition of 'accounted' flag to slab allocation tracepoints to
indicate memcg_kmem accounting, by Vasily
- An optimization of memcg handling in freeing paths, by Muchun
- Various smaller fixes and cleanups
* tag 'slab-for-5.20_or_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: move generic bulk alloc/free functions to SLOB
mm/sl[au]b: use own bulk free function when bulk alloc failed
mm: slab: optimize memcg_slab_free_hook()
mm/tracing: add 'accounted' entry into output of allocation tracepoints
tools/vm/slabinfo: Handle files in debugfs
mm/slub: Simplify __kmem_cache_alias()
mm, slab: fix bad alignments
Andres Freund [Mon, 1 Aug 2022 01:38:33 +0000 (18:38 -0700)]
tools bpftool: Fix compilation error with new binutils
binutils changed the signature of init_disassemble_info(), which now causes
compilation to fail for tools/bpf/bpftool/jit_disasm.c, e.g. on debian
unstable.
Wire up the feature test and switch to init_disassemble_info_compat(),
which were introduced in prior commits, fixing the compilation failure.
I verified that bpftool can still disassemble bpf programs, both with an
old and new dis-asm.h API. There are no output changes for plain and json
formats. When comparing the output from old binutils (2.35)
to new bintuils with the patch (upstream snapshot) there are a few output
differences, but they are unrelated to this patch. An example hunk is:
2f: pop %r14
31: pop %r13
33: pop %rbx
- 34: leaveq
- 35: retq
+ 34: leave
+ 35: ret
Andres Freund [Mon, 1 Aug 2022 01:38:31 +0000 (18:38 -0700)]
tools bpf_jit_disasm: Fix compilation error with new binutils
binutils changed the signature of init_disassemble_info(), which now causes
compilation to fail for tools/bpf/bpf_jit_disasm.c, e.g. on debian
unstable.
Wire up the feature test and switch to init_disassemble_info_compat(),
which were introduced in prior commits, fixing the compilation failure.
I verified that bpf_jit_disasm can still disassemble bpf programs, both
with the old and new dis-asm.h API. With old binutils there's no change in
output before/after this patch. When comparing the output from old
binutils (2.35) to new bintuils with the patch (upstream snapshot) there
are a few output differences, but they are unrelated to this patch. An
example hunk is:
However, I had to use an older kernel to generate the bpf_jit_enabled =
2 output, as that has been broken since 5.18 / 1022a5498f6f745c ("bpf,
x86_64: Use bpf_jit_binary_pack_alloc").
Andres Freund [Mon, 1 Aug 2022 01:38:30 +0000 (18:38 -0700)]
tools perf: Fix compilation error with new binutils
binutils changed the signature of init_disassemble_info(), which now causes
compilation failures for tools/perf/util/annotate.c, e.g. on debian
unstable.
Wire up the feature test and switch to init_disassemble_info_compat(),
which were introduced in prior commits, fixing the compilation failure.
I verified that perf can still disassemble bpf programs by using bpftrace
under load, recording a perf trace, and then annotating the bpf "function"
with and without the changes. With old binutils there's no change in output
before/after this patch. When comparing the output from old binutils (2.35)
to new bintuils with the patch (upstream snapshot) there are a few output
differences, but they are unrelated to this patch. An example hunk is:
This commit introduces a wrapper for init_disassemble_info(), to avoid
spreading #ifdef DISASM_INIT_STYLED to a bunch of places. Subsequent
commits will use it to fix the build failures.
It likely is worth adding a wrapper for disassember(), to avoid the already
existing DISASM_FOUR_ARGS_SIGNATURE ifdefery.
Xiu Jianfeng [Fri, 10 Jun 2022 09:23:07 +0000 (17:23 +0800)]
smack: Remove the redundant lsm_inode_alloc
It's not possible for inode->i_security to be NULL here because every
inode will call inode_init_always and then lsm_inode_alloc to alloc
memory for inode->security, this is what LSM infrastructure management
do, so remove this redundant code.
Jakub Kicinski [Mon, 1 Aug 2022 18:15:39 +0000 (11:15 -0700)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2022-07-28
Jacob Keller says:
Convert all of the Intel drivers with PTP support to the newer .adjfine
implementation which uses scaled parts per million.
This improves the precision of the frequency adjustments by taking advantage
of the full scaled parts per million input coming from user space.
In addition, all implementations are converted to using the
mul_u64_u64_div_u64 function which better handles the intermediate value.
This function supports architecture specific instructions where possible to
avoid loss of precision if the normal 64-bit multiplication would overflow.
Of note, the i40e implementation is now able to avoid loss of precision on
slower link speeds by taking advantage of this to multiply by the link speed
factor first. This results in a significantly more precise adjustment by
allowing the calculation to impact the lower bits.
This also gets us a step closer to being able to remove the .adjfreq
entirely by removing its use from many drivers.
I plan to follow this up with a series to update the drivers from other
vendors and drop the .adjfreq implementation entirely.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igb: convert .adjfreq to .adjfine
ixgbe: convert .adjfreq to .adjfine
i40e: convert .adjfreq to .adjfine
i40e: use mul_u64_u64_div_u64 for PTP frequency calculation
e1000e: convert .adjfreq to .adjfine
e1000e: remove unnecessary range check in e1000e_phc_adjfreq
ice: implement adjfine with mul_u64_u64_div_u64
====================
David Sterba [Tue, 12 Jul 2022 21:30:05 +0000 (23:30 +0200)]
affs: use memcpy_to_page and remove replace kmap_atomic()
The use of kmap() is being deprecated in favor of kmap_local_page()
where it is feasible. For kmap around a memcpy there's a convenience
helper memcpy_to_page that also makes the flush_dcache_page() redundant.
CC: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: David Sterba <dsterba@suse.com>
Namhyung Kim [Fri, 1 Jul 2022 23:09:32 +0000 (16:09 -0700)]
perf test: Add ARM SPE system wide test
In the past it had a problem not setting the pid/tid on the sample
correctly when system-wide mode is used. Although it's fixed now it'd
be nice if we have a test case for it.
Reviewed-by: German Gomez <german.gomez@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220701230932.1000495-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 16 Jun 2022 20:22:14 +0000 (22:22 +0200)]
perf tools: Rework prologue generation code
Some functions we use for bpf prologue generation are going to be
deprecated. This change reworks current code not to use them.
We need to replace following functions/struct:
bpf_program__set_prep
bpf_program__nth_fd
struct bpf_prog_prep_result
Currently we use bpf_program__set_prep to hook perf callback before
program is loaded and provide new instructions with the prologue.
We replace this function/ality by taking instructions for specific
program, attaching prologue to them and load such new ebpf programs
with prologue using separate bpf_prog_load calls (outside libbpf
load machinery).
Before we can take and use program instructions, we need libbpf to
actually load it. This way we get the final shape of its instructions
with all relocations and verifier adjustments).
There's one glitch though.. perf kprobe program already assumes
generated prologue code with proper values in argument registers,
so loading such program directly will fail in the verifier.
That's where the fallback pre-load handler fits in and prepends
the initialization code to the program. Once such program is loaded
we take its instructions, cut off the initialization code and prepend
the prologue.
I know.. sorry ;-)
To have access to the program when loading this patch adds support to
register 'fallback' section handler to take care of perf kprobe programs.
The fallback means that it handles any section definition besides the
ones that libbpf handles.
The handler serves two purposes:
- allows perf programs to have special arguments in section name
- allows perf to use pre-load callback where we can attach init
code (zeroing all argument registers) to each perf program
Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220616202214.70359-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Mon, 1 Aug 2022 17:37:00 +0000 (10:37 -0700)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Highlights include a major rework of our kPTI page-table rewriting
code (which makes it both more maintainable and considerably faster in
the cases where it is required) as well as significant changes to our
early boot code to reduce the need for data cache maintenance and
greatly simplify the KASLR relocation dance.
Summary:
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU
remains enabled and the boot time is no longer slowed to a crawl
for systems which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages
on systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to
reduce the need for cache maintenance and avoid jumping in and out
of the kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel
command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
arm64: fix KASAN_INLINE
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: enable THP_SWAP for arm64
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: errata: Remove AES hwcap for COMPAT tasks
arm64: numa: Don't check node against MAX_NUMNODES
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
...
Linus Torvalds [Mon, 1 Aug 2022 17:32:06 +0000 (10:32 -0700)]
Merge tag 'm68k-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Use RNG seed from bootinfo block on virt platform
- defconfig updates
- Minor fixes and improvements
* tag 'm68k-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v5.19-rc1
m68k: Add common forward declaration for show_registers()
m68k: mac: Remove forward declaration for mac_nmi_handler()
m68k: virt: Fix missing platform_device_unregister() on error in virt_platform_init()
m68k: virt: Use RNG seed from bootinfo block
m68k: bitops: Change __fls to return and accept unsigned long
m68k: Kconfig.machine: Add endif comment
m68k: Kconfig.debug: Replace single quotes
m68k: Kconfig.cpu: Fix indentation and add endif comments
m68k: q40: Align '*' in comments
m68k: sun3: Use __func__ to get function's name in an output message
m68k: mac: Fix typos in comments
m68k: virt: Kconfig minor fixes
Linus Torvalds [Mon, 1 Aug 2022 17:17:19 +0000 (10:17 -0700)]
Merge tag 'x86_kdump_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kdump updates from Borislav Petkov:
- Add the ability to pass early an RNG seed to the kernel from the boot
loader
- Add the ability to pass the IMA measurement of kernel and bootloader
to the kexec-ed kernel
* tag 'x86_kdump_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use rng seeds from setup_data
x86/kexec: Carry forward IMA measurement log on kexec
Linus Torvalds [Mon, 1 Aug 2022 17:14:19 +0000 (10:14 -0700)]
Merge tag 'x86_build_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Borislav Petkov:
- Fix stack protector builds when cross compiling with Clang
- Other Kbuild improvements and fixes
* tag 'x86_build_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Omit use of bin2c
x86/purgatory: Hard-code obj-y in Makefile
x86/build: Remove unused OBJECT_FILES_NON_STANDARD_test_nx.o
x86/Kconfig: Fix CONFIG_CC_HAS_SANE_STACKPROTECTOR when cross compiling with clang
Linus Torvalds [Mon, 1 Aug 2022 17:00:43 +0000 (10:00 -0700)]
Merge tag 'x86_misc_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Add a bunch of PCI IDs for new AMD CPUs and use them in k10temp
- Free the pmem platform device on the registration error path
* tag 'x86_misc_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hwmon: (k10temp): Add support for new family 17h and 19h models
x86/amd_nb: Add AMD PCI IDs for SMN communication
x86/pmem: Fix platform-device leak in error path
Linus Torvalds [Mon, 1 Aug 2022 16:49:29 +0000 (09:49 -0700)]
Merge tag 'x86_cpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Remove the vendor check when selecting MWAIT as the default idle
state
- Respect idle=nomwait when supplied on the kernel cmdline
- Two small cleanups
* tag 'x86_cpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Use MSR_IA32_MISC_ENABLE constants
x86: Fix comment for X86_FEATURE_ZEN
x86: Remove vendor checks from prefer_mwait_c1_over_halt
x86: Handle idle=nomwait cmdline properly for x86_idle
Helge Deller [Mon, 1 Aug 2022 15:36:15 +0000 (17:36 +0200)]
parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode
For all syscalls in 32-bit compat mode on 64-bit kernels the upper
32-bits of the 64-bit registers are zeroed out, so a negative 32-bit
signed value will show up as positive 64-bit signed value.
This behaviour breaks the io_pgetevents_time64() syscall which expects
signed 64-bit values for the "min_nr" and "nr" parameters.
Fix this by switching to the compat_sys_io_pgetevents_time64() syscall,
which uses "compat_long_t" types for those parameters.
Fix the output of /proc/iomem to show the real hardware device name
including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]".
Up to now only the pa_pathname ("[8:16.0]") was shown.
Linus Torvalds [Mon, 1 Aug 2022 16:36:18 +0000 (09:36 -0700)]
Merge tag 'x86_fpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu update from Borislav Petkov:
- Add machinery to initialize AMX register state in order for
AMX-capable CPUs to be able to enter deeper low-power state
* tag 'x86_fpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Add a new flag to initialize the AMX state
x86/fpu: Add a helper to prepare AMX state for low-power CPU idle
Linus Torvalds [Mon, 1 Aug 2022 16:34:39 +0000 (09:34 -0700)]
Merge tag 'x86_mm_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Rename a PKRU macro to make more sense when reading the code
- Update pkeys documentation
- Avoid reading contended mm's TLB generation var if not absolutely
necessary along with fixing a case where arch_tlbbatch_flush()
doesn't adhere to the generation scheme and thus violates the
conditions for the above avoidance.
* tag 'x86_mm_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/tlb: Ignore f->new_tlb_gen when zero
x86/pkeys: Clarify PKRU_AD_KEY macro
Documentation/protection-keys: Clean up documentation for User Space pkeys
x86/mm/tlb: Avoid reading mm_tlb_gen when possible
Linus Torvalds [Mon, 1 Aug 2022 16:33:17 +0000 (09:33 -0700)]
Merge tag 'x86_cleanups_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanup from Borislav Petkov:
- A single CONFIG_ symbol correction in a comment
* tag 'x86_cleanups_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Refer to the intended config STRICT_DEVMEM in a comment
Linus Torvalds [Mon, 1 Aug 2022 16:29:41 +0000 (09:29 -0700)]
Merge tag 'ras_core_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS update from Borislav Petkov:
"A single RAS change:
- Probe whether hardware error injection (direct MSR writes) is
possible when injecting errors on AMD platforms. In some cases, the
platform could prohibit those"
* tag 'ras_core_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check whether writes to MCA_STATUS are getting ignored
Xu Qiang [Mon, 1 Aug 2022 12:05:06 +0000 (12:05 +0000)]
of/fdt: declared return type does not match actual return type
The commit 649cab56de8e (“of: properly check for error returned
by fdt_get_name()”) changed the return value type from bool to int,
but forgot to change the return value simultaneously.
populate_node was only called in unflatten_dt_nodes, and returns
with values greater than or equal to 0 were discarded without further
processing. Considering that return 0 usually indicates success,
return 0 instead of return true.
Linus Torvalds [Mon, 1 Aug 2022 16:10:07 +0000 (09:10 -0700)]
Merge tag 'fs.idmapped.overlay.acl.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull acl updates from Christian Brauner:
"Last cycle we introduced support for mounting overlayfs on top of
idmapped mounts. While looking into additional testing we realized
that posix acls don't really work correctly with stacking filesystems
on top of idmapped layers.
We already knew what the fix were but it would require work that is
more suitable for the merge window so we turned off posix acls for
v5.19 for overlayfs on top of idmapped layers with Miklos routing my
patch upstream in 72a8e05d4f66 ("Merge tag 'ovl-fixes-5.19-rc7' [..]").
This contains the work to support posix acls for overlayfs on top of
idmapped layers. Since the posix acl fixes should use the new
vfs{g,u}id_t work the associated branch has been merged in. (We sent a
pull request for this earlier.)
We've also pulled in Miklos pull request containing my patch to turn
of posix acls on top of idmapped layers. This allowed us to avoid
rebasing the branch which we didn't like because we were already at
rc7 by then. Merging it in allows this branch to first fix posix acls
and then to cleanly revert the temporary fix it brought in by commit 4a47c6385bb4 ("ovl: turn of SB_POSIXACL with idmapped layers
temporarily").
The last patch in this series adds Seth Forshee as a co-maintainer for
idmapped mounts. Seth has been integral to all of this work and is
also the main architect behind the filesystem idmapping work which
ultimately made filesystems such as FUSE and overlayfs available in
containers. He continues to be active in both development and review.
I'm very happy he decided to help and he has my full trust. This
increases the bus factor which is always great for work like this. I'm
honestly very excited about this because I think in general we don't
do great in the bringing on new maintainers department"
* tag 'fs.idmapped.overlay.acl.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
Add Seth Forshee as co-maintainer for idmapped mounts
Revert "ovl: turn of SB_POSIXACL with idmapped layers temporarily"
ovl: handle idmappings in ovl_get_acl()
acl: make posix_acl_clone() available to overlayfs
acl: port to vfs{g,u}id_t
acl: move idmapped mount fixup into vfs_{g,s}etxattr()
mnt_idmapping: add vfs[g,u]id_into_k[g,u]id()
Linus Torvalds [Mon, 1 Aug 2022 15:56:55 +0000 (08:56 -0700)]
Merge tag 'fs.idmapped.vfsuid.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs idmapping updates from Christian Brauner:
"This introduces the new vfs{g,u}id_t types we agreed on. Similar to
k{g,u}id_t the new types are just simple wrapper structs around
regular {g,u}id_t types.
They allow to establish a type safety boundary in the VFS for idmapped
mounts preventing confusion betwen {g,u}ids mapped into an idmapped
mount and {g,u}ids mapped into the caller's or the filesystem's
idmapping.
An initial set of helpers is introduced that allows to operate on
vfs{g,u}id_t types. We will remove all references to non-type safe
idmapped mounts helpers in the very near future. The patches do
already exist.
This converts the core attribute changing codepaths which become
significantly easier to reason about because of this change.
Just a few highlights here as the patches give detailed overviews of
what is happening in the commit messages:
- The kernel internal struct iattr contains type safe vfs{g,u}id_t
values clearly communicating that these values have to take a given
mount's idmapping into account.
- The ownership values placed in struct iattr to change ownership are
identical for idmapped and non-idmapped mounts going forward. This
also allows to simplify stacking filesystems such as overlayfs that
change attributes In other words, they always represent the values.
- Instead of open coding checks for whether ownership changes have
been requested and an actual update of the inode is required we now
have small static inline wrappers that abstract this logic away
removing a lot of code duplication from individual filesystems that
all open-coded the same checks"
* tag 'fs.idmapped.vfsuid.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mnt_idmapping: align kernel doc and parameter order
mnt_idmapping: use new helpers in mapped_fs{g,u}id()
fs: port HAS_UNMAPPED_ID() to vfs{g,u}id_t
mnt_idmapping: return false when comparing two invalid ids
attr: fix kernel doc
attr: port attribute changes to new types
security: pass down mount idmapping to setattr hook
quota: port quota helpers mount ids
fs: port to iattr ownership update helpers
fs: introduce tiny iattr ownership update helpers
fs: use mount types in iattr
fs: add two type safe mapping helpers
mnt_idmapping: add vfs{g,u}id_t
Linus Torvalds [Mon, 1 Aug 2022 15:54:59 +0000 (08:54 -0700)]
Merge tag 'filelock-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"Just a couple of flock() patches from Kuniyuki Iwashima.
The main change is that this moves a file_lock allocation from the
slab to the stack"
* tag 'filelock-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs/lock: Rearrange ops in flock syscall.
fs/lock: Don't allocate file_lock in flock_make_lock().
Linus Torvalds [Mon, 1 Aug 2022 15:52:37 +0000 (08:52 -0700)]
Merge tag 'erofs-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"First of all, we'd like to add Yue Hu and Jeffle Xu as two new
reviewers. Thank them for spending time working on EROFS!
There is no major feature outstanding in this cycle, mainly a patchset
I worked on to prepare for rolling hash deduplication and folios for
compressed data as the next big features. It kills the unneeded
PG_error flag dependency as well.
Apart from that, there are bugfixes and cleanups as always. Details
are listed below:
- Add Yue Hu and Jeffle Xu as reviewers
- Add the missing wake_up when updating lzma streams
- Avoid consecutive detection for Highmem memory
- Prepare for multi-reference pclusters and get rid of PG_error
- Fix ctx->pos update for NFS export
- minor cleanups"
* tag 'erofs-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (23 commits)
erofs: update ctx->pos for every emitted dirent
erofs: get rid of the leftover PAGE_SIZE in dir.c
erofs: get rid of erofs_prepare_dio() helper
erofs: introduce multi-reference pclusters (fully-referenced)
erofs: record the longest decompressed size in this round
erofs: introduce z_erofs_do_decompressed_bvec()
erofs: try to leave (de)compressed_pages on stack if possible
erofs: introduce struct z_erofs_decompress_backend
erofs: get rid of `z_pagemap_global'
erofs: clean up `enum z_erofs_collectmode'
erofs: get rid of `enum z_erofs_page_type'
erofs: rework online page handling
erofs: switch compressed_pages[] to bufvec
erofs: introduce `z_erofs_parse_in_bvecs'
erofs: drop the old pagevec approach
erofs: introduce bufvec to store decompressed buffers
erofs: introduce `z_erofs_parse_out_bvecs()'
erofs: clean up z_erofs_collector_begin()
erofs: get rid of unneeded `inode', `map' and `sb'
erofs: avoid consecutive detection for Highmem memory
...
Linus Torvalds [Mon, 1 Aug 2022 15:48:37 +0000 (08:48 -0700)]
Merge tag 'fs_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 and reiserfs updates from Jan Kara:
"A fix for ext2 handling of a corrupted fs image and cleanups in ext2
and reiserfs"
* tag 'fs_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Add more validity checks for inode counts
fs/reiserfs/inode: remove dead code in _get_block_create_0()
fs/ext2: replace ternary operator with min_t()
Linus Torvalds [Mon, 1 Aug 2022 15:46:53 +0000 (08:46 -0700)]
Merge tag 'dlm-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Delay the cleanup of interrupted posix lock requests until the user
space result arrives. Previously, the immediate cleanup would lead to
extraneous warnings when the result arrived.
- Tracepoint improvements, e.g. adding the lock resource name.
- Delay the completion of lockspace creation until one full recovery
cycle has completed. This allows more error cases to be returned to
the caller.
- Remove warnings from the locking layer about delayed network replies.
The recently added midcomms warnings are much more useful.
- Begin the process of deprecating two unused lock-timeout-related
features. These features now require enabling via a Kconfig option,
and enabling them triggers deprecation warnings. We expect to remove
the code in v6.2.
* tag 'dlm-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: move kref_put assert for lkb structs
fs: dlm: don't use deprecated timeout features by default
fs: dlm: add deprecation Kconfig and warnings for timeouts
fs: dlm: remove timeout from dlm_user_adopt_orphan
fs: dlm: remove waiter warnings
fs: dlm: fix grammar in lowcomms output
fs: dlm: add comment about lkb IFL flags
fs: dlm: handle recovery result outside of ls_recover
fs: dlm: make new_lockspace() wait until recovery completes
fs: dlm: call dlm_lsop_recover_prep once
fs: dlm: update comments about recovery and membership handling
fs: dlm: add resource name to tracepoints
fs: dlm: remove additional dereference of lksb
fs: dlm: change ast and bast trace order
fs: dlm: change posix lock sigint handling
fs: dlm: use dlm_plock_info for do_unlock_close
fs: dlm: change plock interrupted message to debug again
fs: dlm: add pid to debug log
fs: dlm: plock use list_first_entry
lib/nodemask: inline next_node_in() and node_random()
The functions are pretty thin wrappers around find_bit engine, and
keeping them in c-file prevents compiler from small_const_nbits()
optimization, which must take place for all systems with MAX_NUMNODES
less than BITS_PER_LONG (default is 16 for me).
Moving them to header file doesn't blow up the kernel size:
add/remove: 1/2 grow/shrink: 9/5 up/down: 968/-88 (880)
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Paul Mackerras <paulus@samba.org> CC: Rasmus Villemoes <linux@rasmusvillemoes.dk> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Yury Norov <yury.norov@gmail.com>
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
archrandom.h includes <asm/machdep.h> to refer ppc_md. This causes
circular header dependency, if generic nodemask.h includes random.h:
In file included from include/linux/cred.h:16,
from include/linux/seq_file.h:13,
from arch/powerpc/include/asm/machdep.h:6,
from arch/powerpc/include/asm/archrandom.h:5,
from include/linux/random.h:109,
from include/linux/nodemask.h:97,
from include/linux/list_lru.h:12,
from include/linux/fs.h:13,
from include/linux/compat.h:17,
from arch/powerpc/kernel/asm-offsets.c:12:
include/linux/sched.h:1203:9: error: unknown type name 'nodemask_t'
1203 | nodemask_t mems_allowed;
| ^~~~~~~~~~
Fix it by removing <asm/machdep.h> dependency from archrandom.h
Now as arch_get_random_seed_long() moved to c-file, and not exported,
it's not available for modules. As Michael Ellerman says:
I think we actually don't need it exported to modules, I think it's
a private detail of the RNG <-> architecture interface, not something
that modules should be calling.
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Paul Mackerras <paulus@samba.org> CC: Rasmus Villemoes <linux@rasmusvillemoes.dk> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: linuxppc-dev@lists.ozlabs.org Suggested-by: Michael Ellerman <mpe@ellerman.id.au> (for non-exporting) Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Yury Norov <yury.norov@gmail.com>
Correct all uses of "it's" that are meant to be possessive "its".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220801025221.30563-1-rdunlap@infradead.org
Hans de Goede [Mon, 1 Aug 2022 14:55:36 +0000 (16:55 +0200)]
platform/x86/intel/vsec: Fix wrong type for local status variables
The local status variables in intel_vsec_pci_error_detected()
and intel_vsec_pci_slot_reset() should have pci_ers_result_t as type
(and not pci_channel_state_t).
Also fix a whitespace error as well as intel_vsec_pci_err_handlers not
being marked static.
This fixes the following sparse errors:
drivers/platform/x86/intel/vsec.c:429:38: sparse: sparse: incorrect type in initializer (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:429:38: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:429:38: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:434:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:434:24: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:434:24: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:438:16: sparse: sparse: incorrect type in return expression (different base types) @@ expected restricted pci_ers_result_t @@ got restricted pci_channel_state_t [usertype] status @@
drivers/platform/x86/intel/vsec.c:438:16: sparse: expected restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:438:16: sparse: got restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:444:38: sparse: sparse: incorrect type in initializer (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:444:38: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:444:38: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:457:16: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:457:16: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:457:16: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:472:16: sparse: sparse: incorrect type in return expression (different base types) @@ expected restricted pci_ers_result_t @@ got restricted pci_channel_state_t [usertype] status @@
drivers/platform/x86/intel/vsec.c:472:16: sparse: expected restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:472:16: sparse: got restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:480:33: sparse: sparse: symbol 'intel_vsec_pci_err_handlers' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: David E Box <david.e.box@intel.com> Cc: Gayatri Kammela <gayatri.kammela@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220801145536.172410-1-hdegoede@redhat.com
Alexander Aring [Fri, 24 Jun 2022 01:28:58 +0000 (21:28 -0400)]
fs: dlm: move kref_put assert for lkb structs
The unhold_lkb() function decrements the lock's kref, and
asserts that the ref count was not the final one. Use the
kref_put release function (which should not be called) to
call the assert, rather than doing the assert based on the
kref_put return value. Using kill_lkb() as the release
function doesn't make sense if we only want to assert.
Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
Alexander Aring [Wed, 22 Jun 2022 18:45:23 +0000 (14:45 -0400)]
fs: dlm: don't use deprecated timeout features by default
This patch will disable use of deprecated timeout features if
CONFIG_DLM_DEPRECATED_API is not set. The deprecated features
will be removed in upcoming kernel release v6.2.
Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
Alexander Aring [Wed, 22 Jun 2022 18:45:22 +0000 (14:45 -0400)]
fs: dlm: add deprecation Kconfig and warnings for timeouts
This patch adds a CONFIG_DLM_DEPRECATED_API Kconfig option
that must be enabled to use two timeout-related features
that we intend to remove in kernel v6.2. Warnings are
printed if either is enabled and used. Neither has ever
been used as far as we know.
. The DLM_LSFL_TIMEWARN lockspace creation flag will be
removed, along with the associated configfs entry for
setting the timeout. Setting the flag and configfs file
would cause dlm to track how long locks were waiting
for reply messages. After a timeout, a kernel message
would be logged, and a netlink message would be sent
to userspace. Recently, midcomms messages have been
added that produce much better logging about actual
problems with messages. No use has ever been found
for the netlink messages.
. The userspace libdlm API has allowed the DLM_LKF_TIMEOUT
flag with a timeout value to be set in lock requests.
The lock request would be cancelled after the timeout.
Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
rseq: Kill process when unknown flags are encountered in ABI structures
rseq_abi()->flags and rseq_abi()->rseq_cs->flags 29 upper bits are
currently unused.
The current behavior when those bits are set is to ignore them. This is
not an ideal behavior, because when future features will start using
those flags, if user-space fails to correctly validate that the kernel
indeed supports those flags (e.g. with a new sys_rseq flags bit) before
using them, it may incorrectly assume that the kernel will handle those
flags way when in fact those will be silently ignored on older kernels.
Validating that unused flags bits are cleared will allow a smoother
transition when those flags will start to be used by allowing
applications to fail early, and obviously, when they attempt to use the
new flags on an older kernel that does not support them.
The pretty much unused RSEQ_CS_FLAG_NO_RESTART_ON_* flags introduce
complexity in rseq, and are subtly buggy [1]. Solving those issues
requires introducing additional complexity in the rseq implementation
for each supported architecture.
Considering that it complexifies the rseq ABI, I am proposing that we
deprecate those flags. [2]
So far there appears to be consensus from maintainers of user-space
projects impacted by this feature that its removal would be a welcome
simplification. [3]
The deprecation approach proposed here is to issue WARN_ON_ONCE() when
encountering those flags and kill the offending process with sigsegv.
This should allow us to quickly identify whether anyone yells at us for
removing this.
Andrei Vagin [Fri, 22 Jul 2022 23:02:40 +0000 (16:02 -0700)]
selftests: kvm: set rax before vmcall
kvm_hypercall has to place the hypercall number in rax.
Trace events show that kvm_pv_test doesn't work properly:
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
With this change, it starts working as expected:
kvm_pv_test-54285: kvm_hypercall: nr 0x5 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-54285: kvm_hypercall: nr 0xa a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-54285: kvm_hypercall: nr 0xb a0 0x0 a1 0x0 a2 0x0 a3 0x0
Signed-off-by: Andrei Vagin <avagin@google.com>
Message-Id: <20220722230241.1944655-5-avagin@google.com> Fixes: ac4a4d6de22e ("selftests: kvm: test enforcement of paravirtual cpuid features") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the patch (2d86612aacb7805f ("perf symbol: Correct address for bss
symbols")) I see lots of:
dso__load_sym_internal: failed to find program header for symbol:
Lorg/apache/fop/fo/FObj;bind(Lorg/apache/fop/fo/PropertyList;)V
st_value: 0x40
Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220731164923.691193-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 29 Jul 2022 20:07:56 +0000 (13:07 -0700)]
perf lock: Implement cpu and task filters for BPF
Add -a/--all-cpus and -C/--cpu options for cpu filtering. Also -p/--pid
and --tid options are added for task filtering. The short -t option is
taken for --threads already. Tracking the command line workload is
possible as well.
$ sudo perf lock contention -a -b sleep 1
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220729200756.666106-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 29 Jul 2022 20:07:55 +0000 (13:07 -0700)]
perf lock: Use BPF for lock contention analysis
Add -b/--use-bpf option to use BPF to collect lock contention stats.
For simplicity it now runs system-wide and requires C-c to stop.
Upcoming changes will add the usual filtering.
$ sudo perf lock con -b
^C
contended total wait max wait avg wait type caller
42 192.67 us 13.64 us 4.59 us spinlock queue_work_on+0x20
23 85.54 us 10.28 us 3.72 us spinlock worker_thread+0x14a
6 13.92 us 6.51 us 2.32 us mutex kernfs_iop_permission+0x30
3 11.59 us 10.04 us 3.86 us mutex kernfs_dop_revalidate+0x3c
1 7.52 us 7.52 us 7.52 us spinlock kthread+0x115
1 7.24 us 7.24 us 7.24 us rwlock:W sys_epoll_wait+0x148
2 7.08 us 3.99 us 3.54 us spinlock delayed_work_timer_fn+0x1b
1 6.41 us 6.41 us 6.41 us spinlock idle_balance+0xa06
2 2.50 us 1.83 us 1.25 us mutex kernfs_iop_lookup+0x2f
1 1.71 us 1.71 us 1.71 us mutex kernfs_iop_getattr+0x2c
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220729200756.666106-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
powerpc/64: Init jump labels before parse_early_param()
On 64-bit, calling jump_label_init() in setup_feature_keys() is too
late because static keys may be used in subroutines of
parse_early_param() which is again subroutine of early_init_devtree().
For example booting with "threadirqs":
static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init()
WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120
...
NIP static_key_enable_cpuslocked+0xfc/0x120
LR static_key_enable_cpuslocked+0xf8/0x120
Call Trace:
static_key_enable_cpuslocked+0xf8/0x120 (unreliable)
static_key_enable+0x30/0x50
setup_forced_irqthreads+0x28/0x40
do_early_param+0xa0/0x108
parse_args+0x290/0x4e0
parse_early_options+0x48/0x5c
parse_early_param+0x58/0x84
early_init_devtree+0xd4/0x518
early_setup+0xb4/0x214
So call jump_label_init() just before parse_early_param() in
early_init_devtree().
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[mpe: Add call trace to change log and minor wording edits.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com
GCC 12 thinks that `actual` might be used uninitialised. It's not, the
use is guarded by `bad_mmcr2` which is only set to true at the same
point where `actual` is initialised.
cycles_with_mmcr2_test.c: In function ‘cycles_with_mmcr2’:
cycles_with_mmcr2_test.c:81:17: error: ‘actual’ may be used uninitialized [-Werror=maybe-uninitialized]
81 | printf("Bad MMCR2 value seen is 0x%lx\n", actual);
Silence the warning by initialising `actual` to zero.
Miaoqian Lin [Sun, 5 Jun 2022 06:51:29 +0000 (10:51 +0400)]
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() in the error path to avoid refcount leak.
Miaoqian Lin [Sun, 5 Jun 2022 05:32:23 +0000 (09:32 +0400)]
powerpc/xive: Fix refcount leak in xive_get_max_prio
of_find_node_by_path() returns a node pointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Miaoqian Lin [Fri, 3 Jun 2022 12:15:42 +0000 (16:15 +0400)]
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
of_find_node_by_path() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 0afacde3df4c ("[POWERPC] spufs: allow isolated mode apps by starting the SPE loader") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220603121543.22884-1-linmq006@gmail.com
powerpc/perf: Include caps feature for power10 DD1 version
Commit 6320e693d98c ("powerpc/perf: Add support for caps under sysfs in
powerpc") added support for caps under sysfs in powerpc. This added caps
directory to: /sys/bus/event_source/devices/cpu/ for power8, power9,
power10 and generic compat PMU in respective PMU driver code.
For power10, it is added under "power10_pmu_attr_groups". But
for DD1 version, attr_groups are defined under dd1 array:
"power10_pmu_attr_groups_dd1". Since caps is not added for DD1,
it fails to include "cpu/caps" in DD1 model.
The issue was observed while booting power10 pseries with qemu version
6, but not observed with qemu version 7. This is because qemu version 7
uses a DD 2.0 CPU model.
Fix it by adding caps for dd1 attr_groups in power10 PMU driver.
Fixes: 6320e693d98c ("powerpc/perf: Add support for caps under sysfs in powerpc") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Update change log to mention qemu 7 DD2.0 CPU model] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220728163746.85062-1-atrajeev@linux.vnet.ibm.com
Oliver Upton [Tue, 19 Jul 2022 14:31:34 +0000 (14:31 +0000)]
selftests: KVM: Add exponent check for boolean stats
The only sensible exponent for a boolean stat is 0. Add a test assertion
requiring all boolean statistics to have an exponent of 0.
Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-4-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Tue, 19 Jul 2022 14:31:33 +0000 (14:31 +0000)]
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
As it turns out, tests sometimes fail. When that is the case, packing
the test assertion with as much relevant information helps track down
the problem more quickly.
Sharpen up the stat descriptor assertions in kvm_binary_stats_test to
more precisely describe the reason for the test assertion and which
stat is to blame.
Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-3-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Tue, 19 Jul 2022 14:31:32 +0000 (14:31 +0000)]
selftests: KVM: Check stat name before other fields
In order to provide more useful test assertions that describe the broken
stats descriptor, perform sanity check on the stat name before any other
descriptor field. While at it, avoid dereferencing the name field if the
sanity check fails as it is more likely to contain garbage.
Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-2-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David S. Miller [Mon, 1 Aug 2022 11:38:57 +0000 (12:38 +0100)]
Merge branch 'funeth-tx-xdp-frags'
Dimitris Michailidis says:
====================
net/funeth: Tx support for XDP with frags
Support XDP with fragments for XDP_TX and ndo_xdp_xmit.
The first three patches rework existing code used by the skb path to
make it suitable also for XDP. With these all the callees of the main
Tx XDP function, fun_xdp_tx(), are fragment-capable. The last patch
updates fun_xdp_tx() to handle fragments.
====================
Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / people / ms / linux.git / log
