Bing Fan [Fri, 24 Jun 2022 02:24:42 +0000 (10:24 +0800)]
watchdog: sp805_wdt: add arm cmsdk apb wdt support
Support arm CMSDK ip apb watchdog device.
Description details of this device can be found in the
document DDI0479D_m_class_processor_system_r1p1_trm.pdf
on the arm's document web. Which periphid is 0x001bb824.
The registers are basically the same as the 805, just a
few more: Periphid4/5/6/7 with offset 0xFD0/0xFD4/0xFD8/0xFDC.
For the register description of arm,sp805, please refer
to the document DDI0270-arm-sp805.pdf.
Rob Herring [Thu, 26 May 2022 01:41:27 +0000 (20:41 -0500)]
dt-bindings: watchdog: faraday: Fix typo in example 'timeout-sec' property
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples.
The correct common watchdog property is 'timeout-sec', not 'timeout-secs'.
cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
cgroup_update_dfl_csses() write-lock the threadgroup_rwsem as updating the
csses can trigger process migrations. However, if the subtree doesn't
contain any tasks, there aren't gonna be any cgroup migrations. This
condition can be trivially detected by testing whether
mgctx.preloaded_src_csets is empty. Elide write-locking threadgroup_rwsem if
the subtree is empty.
After this optimization, the usage pattern of creating a cgroup, enabling
the necessary controllers, and then seeding it with CLONE_INTO_CGROUP and
then removing the cgroup after it becomes empty doesn't need to write-lock
threadgroup_rwsem at all.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Michal Koutný <mkoutny@suse.com>
Matthias May [Thu, 21 Jul 2022 20:27:19 +0000 (22:27 +0200)]
ip_tunnels: allow VXLAN/GENEVE to inherit TOS/TTL from VLAN
The current code allows for VXLAN and GENEVE to inherit the TOS
respective the TTL when skb-protocol is ETH_P_IP or ETH_P_IPV6.
However when the payload is VLAN encapsulated, then this inheriting
does not work, because the visible skb-protocol is of type
ETH_P_8021Q or ETH_P_8021AD.
====================
net: usb: ax88179_178a: improvements and bug fixes
Power management was partially broken. There were two issues when dropping
into a sleep state.
1. Resume was not doing a fully HW restore. Only a partial restore. This
lead to a couple things being broken on resume. One of them being tcp rx.
2. wolopt was not being restored properly on resume.
Also did some general improvements and clean up to make it easier to fix
the issues mentioned above.
====================
- Check if wol is supported on reset instead of everytime get_wol
is called.
- Save wolopts in private data instead of relying on the HW to save it.
- Defer enabling WoL until suspend instead of enabling it everytime
set_wol is called.
Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need more space to save WoL context. So lets allocate memory
for ax88179_data instead of using struct usbnet data field which
only supports 5 words. We continue to use the struct usbnet data
field for multicast filters. However since we no longer have the
private data stored there, we can shift it to the beginning.
Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 23 Jul 2022 02:00:17 +0000 (19:00 -0700)]
Merge tag 'for-net-next-2022-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for IM Networks PID 0x3568
- Add support for BCM4349B1
- Add support for CYW55572
- Add support for MT7922 VID/PID 0489/e0e2
- Add support for Realtek RTL8852C
- Initial support for Isochronous Channels/ISO sockets
- Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING quirk
* tag 'for-net-next-2022-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (58 commits)
Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet
Bluetooth: btusb: Add support for ISO packets
Bluetooth: ISO: Add broadcast support
Bluetooth: Add initial implementation of BIS connections
Bluetooth: Add BTPROTO_ISO socket type
Bluetooth: Add initial implementation of CIS connections
Bluetooth: hci_core: Introduce hci_recv_event_data
Bluetooth: Convert delayed discov_off to hci_sync
Bluetooth: Remove update_scan hci_request dependancy
Bluetooth: Remove dead code from hci_request.c
Bluetooth: btrtl: Fix typo in comment
Bluetooth: MGMT: Fix holding hci_conn reference while command is queued
Bluetooth: mgmt: Fix using hci_conn_abort
Bluetooth: Use bt_status to convert from errno
Bluetooth: Add bt_status
Bluetooth: hci_sync: Split hci_dev_open_sync
Bluetooth: hci_sync: Refactor remove Adv Monitor
Bluetooth: hci_sync: Refactor add Adv Monitor
Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING
Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSR
...
====================
Liao Chang [Wed, 25 May 2022 08:02:41 +0000 (16:02 +0800)]
csky/kprobe: reclaim insn_slot on kprobe unregistration
On kprobe registration kernel allocate one insn_slot for new kprobe,
but it forget to reclaim the insn_slot on unregistration, leading to a
potential leakage.
This adds broadcast support for BTPROTO_ISO by extending the
sockaddr_iso with a new struct sockaddr_iso_bc where the socket user
can set the broadcast address when receiving, the SID and the BIS
indexes it wants to synchronize.
When using BTPROTO_ISO for broadcast the roles are:
Broadcaster -> uses connect with address set to BDADDR_ANY:
> tools/isotest -s 00:00:00:00:00:00
Broadcast Receiver -> uses listen with address set to broadcaster:
> tools/isotest -d 00:AA:01:00:00:00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces a new socket type BTPROTO_ISO which can be enabled with
use of ISO Socket experiemental UUID, it can used to initiate/accept
connections and transfer packets between userspace and kernel similarly
to how BTPROTO_SCO works:
Central -> uses connect with address set to destination bdaddr:
> tools/isotest -s 00:AA:01:00:00:00
Peripheral -> uses listen:
> tools/isotest -d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We've added 73 non-merge commits during the last 12 day(s) which contain
a total of 88 files changed, 3458 insertions(+), 860 deletions(-).
The main changes are:
1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai.
2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel
syscalls through kprobe mechanism, from Andrii Nakryiko.
3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel
function, from Song Liu & Jiri Olsa.
4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change
entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi.
5) Add a ksym BPF iterator to allow for more flexible and efficient interactions
with kernel symbols, from Alan Maguire.
6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter.
7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov.
8) libbpf support for writing custom perf event readers, from Jon Doron.
9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar.
10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski.
11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin.
12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev.
13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui.
14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong.
15) Make non-prealloced BPF map allocations low priority to play better with
memcg limits, from Yafang Shao.
16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao.
17) Various smaller cleanups and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits)
bpf: Simplify bpf_prog_pack_[size|mask]
bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)
bpf, x64: Allow to use caller address from stack
ftrace: Allow IPMODIFY and DIRECT ops on the same function
ftrace: Add modify_ftrace_direct_multi_nolock
bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test
bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF
selftests/bpf: Fix test_verifier failed test in unprivileged mode
selftests/bpf: Add negative tests for new nf_conntrack kfuncs
selftests/bpf: Add tests for new nf_conntrack kfuncs
selftests/bpf: Add verifier tests for trusted kfunc args
net: netfilter: Add kfuncs to set and change CT status
net: netfilter: Add kfuncs to set and change CT timeout
net: netfilter: Add kfuncs to allocate and insert CT
net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup
bpf: Add documentation for kfuncs
bpf: Add support for forcing kfunc args to be trusted
bpf: Switch to new kfunc flags infrastructure
tools/resolve_btfids: Add support for 8-byte BTF sets
bpf: Introduce 8-byte BTF set
...
====================
Merge tag 'spi-fix-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more small driver specific fixes"
* tag 'spi-fix-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-rspi: Fix PIO fallback on RZ platforms
spi: spi-cadence: Fix SPI NO Slave Select macro definition
spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers
This looks to be something that was accidentally left out on the csky port.
Define ARCH_GENERIC_PCI_MMAP_RESOURCE to keep it inline with other ports.
Adding ARCH_GENERIC_PCI_MMAP_RESOURCE enables the definition of modern
pci_mmap_resource_range() functions which is generally what new ports
should be using.
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32
platforms or quirks ever set it.
Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0
except on x86_32, where we keep it as a variable, and remove all the arch-
specific definitions.
PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h
pci_get_legacy_ide_irq() is only used on platforms that support PNP, so
many architectures define it but never use it. Replace uses of it with
ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ(), which provide the same
functionality.
Since pci_get_legacy_ide_irq() is no longer used, remove all the
architecture-specific definitions of it as well as asm-generic/pci.h, which
only provides pci_get_legacy_ide_irq()
[bhelgaas: commit log] Co-developed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220722214944.831438-2-shorne@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI: tegra194: Enable support for 256 Byte payload
Set 256 byte payload as the default in the Device Control Register to allow
the PCIe subsystem to enable 256 byte Max Payload Size when a capable link
partner is connected.
In the event of a bandwidth management interrupt, clear the bandwidth
management status in the configuration space also along with clearing
corresponding status in the application logic register to avoid slew
of interrupts.
As part of Root Port interrupt handling, level-0 register is read first and
based on the bits set in that, corresponding level-1 registers are read for
further interrupt processing. Since both these values are currently read
into the same 'val' variable, checking level-0 bits the second time around
is happening on the 'val' variable value of level-1 register contents
instead of freshly reading the level-0 value again.
Fix by using different variables to store level-0 and level-1 registers
contents.
Revert b57256918399 ("PCI: tegra194: Rename tegra_pcie_dw to
tegra194_pcie") to keep the names of data structures generic and not
contain any one particular chip name. This is a preparatory change for the
upcoming changes that add support for Tegra234. This has no functional
impact.
Tegra234 PCIe Root Ports don't generate MSI interrupts for PME and AER
events. Since PCIe spec (r6.0 sec 6.1.4.3) doesn't support using a mix of
INTx and MSI/MSI-X, MSI needs to be disabled to avoid Root Port service
drivers registering their respective ISRs with MSI interrupt and to let
only INTx be used for all events.
This to-be-reverted commit was meant to apply a stricter rule for the
stack to enter pingpong mode. However, the condition used to check for
interactive session "before(tp->lsndtime, icsk->icsk_ack.lrcvtime)" is
jiffy based and might be too coarse, which delays the stack entering
pingpong mode.
We revert this patch so that we no longer use the above condition to
determine interactive session, and also reduce pingpong threshold to 1.
Fixes: 4a41f453bedf ("tcp: change pingpong threshold to 3") Reported-by: LemmyHuang <hlm3280@163.com> Suggested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220721204404.388396-1-weiwan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Begunkov [Thu, 21 Jul 2022 14:25:46 +0000 (15:25 +0100)]
net: fix uninitialised msghdr->sg_from_iter
Because of how struct msghdr is usually initialised some fields and
sg_from_iter in particular might be left out not initialised, so we
can't safely use it in __zerocopy_sg_from_iter().
For now use the callback only when there is ->msg_ubuf set relying on
the fact that they're used together and we properly zero ->msg_ubuf.
Fixes: ebe73a284f4de8 ("net: Allow custom iter handler in msghdr") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Message-Id: <ce8b68b41351488f79fd998b032b3c56e9b1cc6c.1658401817.git.asml.silence@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Niklas Schnelle [Tue, 28 Jun 2022 14:31:00 +0000 (16:31 +0200)]
s390/pci: allow zPCI zbus without a function zero
Currently the zPCI code blocks PCI bus creation and probing of a zPCI zbus
unless there is a PCI function with devfn 0. This is always the case for
the PCI functions with hidden RID, but may keep PCI functions from a
multi-function PCI device with RID information invisible until the function
0 becomes visible. Worse, as a PCI bus is necessary to even present a PCI
hotplug slot, even that remains invisible.
With the probing of these so-called isolated PCI functions enabled for s390
in common code, this restriction is no longer necessary. On network cards
with multiple ports and a PF per port this also allows using each port on
its own while still providing the physical PCI topology information in the
devfn needed to associate VFs with their parent PF.
Niklas Schnelle [Tue, 28 Jun 2022 14:30:59 +0000 (16:30 +0200)]
PCI: Extend isolated function probing to s390
Like the jailhouse hypervisor, s390's PCI architecture allows passing
isolated PCI functions to a guest OS instance. As of now this is was not
utilized even with multi-function support as the s390 PCI code makes sure
that only virtual PCI busses including a function with devfn 0 are
presented to the PCI subsystem. A subsequent change will remove this
restriction.
Allow probing such functions by replacing the existing check for
jailhouse_paravirt() with a new hypervisor_isolated_pci_functions() helper.
Niklas Schnelle [Tue, 28 Jun 2022 14:30:58 +0000 (16:30 +0200)]
PCI: Move jailhouse's isolated function handling to pci_scan_slot()
The special case of the jailhouse hypervisor passing through individual PCI
functions handles scanning for PCI functions even if function 0 does not
exist. Previously this was done with an extra loop duplicating the one in
pci_scan_slot(). By incorporating the check for jailhouse_paravirt() into
pci_scan_slot() we can instead do this as part of the normal slot scan.
Note that with the assignment of dev->multifunction gated by fn > 0 we set
dev->multifunction unconditionally for all functions if function 0 is
missing just as in the existing jailhouse loop.
The only functional change is that we now call pcie_aspm_init_link_state()
for these functions, but this already happened if function 0 was passed
through and should not be a problem.
Niklas Schnelle [Tue, 28 Jun 2022 14:30:57 +0000 (16:30 +0200)]
PCI: Split out next_ari_fn() from next_fn()
In commit b1bd58e448f2 ("PCI: Consolidate "next-function" functions") the
next_fn() function subsumed the traditional and ARI-based next function
determination. This got rid of some needlessly complex function pointer
handling but also reduced the separation between these very different
methods of finding the next function. With the next_fn() cleaned up a bit
we can re-introduce this separation by moving out the ARI handling while
sticking with direct function calls.
Niklas Schnelle [Tue, 28 Jun 2022 14:30:56 +0000 (16:30 +0200)]
PCI: Clean up pci_scan_slot()
While determining the next PCI function is factored out of pci_scan_slot()
into next_fn(), the former still handles the first function as a special
case, which duplicates the code from the scan loop.
Furthermore the non-ARI branch of next_fn() is generally hard to understand
and especially the check for multifunction devices is hidden in the
handling of NULL devices for non-contiguous multifunction. It also signals
that no further functions need to be scanned by returning 0 via wraparound
and this is a valid function number.
Improve upon this by transforming the conditions in next_fn() to be easier
to understand.
By changing next_fn() to return -ENODEV instead of 0 when there is no next
function we can then handle the initial function inside the loop and
deduplicate the shared handling. This also makes it more explicit that only
function 0 must exist.
Bob Pearson [Thu, 30 Jun 2022 19:04:26 +0000 (14:04 -0500)]
RDMA/rxe: Replace __rxe_do_task by rxe_run_task
In rxe_req.c replace calls to __rxe_do_task() by calls to rxe_run_task(..,
0). Using __rxe_do_task is an error because the completer tasklet is not
designed to be re-entrant and __rxe_do_task() should only be called when
it is clear that no one else could be calling the completer tasklet as is
the case in rxe_qp.c where this call is used in safe environments.
Bob Pearson [Thu, 30 Jun 2022 19:04:25 +0000 (14:04 -0500)]
RDMA/rxe: Limit the number of calls to each tasklet
Limit the maximum number of calls to each tasklet from rxe_do_task()
before yielding the cpu. When the limit is reached reschedule the tasklet
and exit the calling loop. This patch prevents one tasklet from consuming
100% of a cpu core and causing a deadlock or soft lockup.
Bob Pearson [Thu, 30 Jun 2022 19:04:22 +0000 (14:04 -0500)]
RDMA/rxe: Fix rnr retry behavior
Currently the completer tasklet when retransmit timer or the rnr timer
fires the same flag (qp->req.need_retry) is set so that if either timer
fires it will attempt to perform a retry flow on the send queue. This has
the effect of responding to an RNR NAK at the first retransmit timer event
which might not allow the requested rnr timeout.
This patch adds a new flag (qp->req.wait_for_rnr_timer) which, if set,
prevents a retry flow until the rnr nak timer fires.
This patch fixes rnr retry errors which can be observed by running the
pyverbs test_rdmacm_async_traffic_external_qp multiple times. With this
patch applied they do not occur.
Bob Pearson [Thu, 30 Jun 2022 19:04:18 +0000 (14:04 -0500)]
RDMA/rxe: Add rxe_is_fenced() subroutine
The code thc that decides whether to defer execution of a wqe in
rxe_requester.c is isolated into a subroutine rxe_is_fenced() and removed
from the call to req_next_wqe(). The condition whether a wqe should be
fenced is changed to comply with the IBA. Currently an operation is fenced
if the fence bit is set in the wqe flags and the last wqe has not
completed. For normal operations the IBA actually only requires that the
last read or atomic operation is complete.
RDMA/rxe: For invalidate compare according to set keys in mr
The 'rkey' input can be an lkey or rkey, and in rxe the lkey or rkey have
the same value, including the variant bits.
So, if mr->rkey is set, compare the invalidate key with it, otherwise
compare with the mr->lkey.
Since we already did a lookup on the non-varient bits to get this far, the
check's only purpose is to confirm that the wqe has the correct variant
bits.
Fixes: 001345339f4c ("RDMA/rxe: Separate HW and SW l/rkeys") Link: https://lore.kernel.org/r/20220707073006.328737-1-haris.phnx@gmail.com Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This introduces hci_recv_event_data to make it simpler to access the
contents of last received event rather than having to pass its contents
to the likes of *_ind/*_cfm callbacks.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Song Liu [Wed, 13 Jul 2022 20:49:50 +0000 (13:49 -0700)]
bpf: Simplify bpf_prog_pack_[size|mask]
Simplify the logic that selects bpf_prog_pack_size, and always use
(PMD_SIZE * num_possible_nodes()). This is a good tradeoff, as most of
the performance benefit observed is from less direct map fragmentation [0].
Also, module_alloc(4MB) may not allocate 4MB aligned memory. Therefore,
we cannot use (ptr & bpf_prog_pack_mask) to find the correct address of
bpf_prog_pack. Fix this by checking the header address falls in the range
of pack->ptr and (pack->ptr + bpf_prog_pack_size).
Song Liu [Wed, 20 Jul 2022 00:21:26 +0000 (17:21 -0700)]
bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)
When tracing a function with IPMODIFY ftrace_ops (livepatch), the bpf
trampoline must follow the instruction pointer saved on stack. This needs
extra handling for bpf trampolines with BPF_TRAMP_F_CALL_ORIG flag.
Implement bpf_tramp_ftrace_ops_func and use it for the ftrace_ops used
by BPF trampoline. This enables tracing functions with livepatch.
This also requires moving bpf trampoline to *_ftrace_direct_mult APIs.
Jiri Olsa [Wed, 20 Jul 2022 00:21:25 +0000 (17:21 -0700)]
bpf, x64: Allow to use caller address from stack
Currently we call the original function by using the absolute address
given at the JIT generation. That's not usable when having trampoline
attached to multiple functions, or the target address changes dynamically
(in case of live patch). In such cases we need to take the return address
from the stack.
Adding support to retrieve the original function address from the stack
by adding new BPF_TRAMP_F_ORIG_STACK flag for arch_prepare_bpf_trampoline
function.
Basically we take the return address of the 'fentry' call:
function + 0: call fentry # stores 'function + 5' address on stack
function + 5: ...
The 'function + 5' address will be used as the address for the
original function to call.
Song Liu [Wed, 20 Jul 2022 00:21:24 +0000 (17:21 -0700)]
ftrace: Allow IPMODIFY and DIRECT ops on the same function
IPMODIFY (livepatch) and DIRECT (bpf trampoline) ops are both important
users of ftrace. It is necessary to allow them work on the same function
at the same time.
First, DIRECT ops no longer specify IPMODIFY flag. Instead, DIRECT flag is
handled together with IPMODIFY flag in __ftrace_hash_update_ipmodify().
Then, a callback function, ops_func, is added to ftrace_ops. This is used
by ftrace core code to understand whether the DIRECT ops can share with an
IPMODIFY ops. To share with IPMODIFY ops, the DIRECT ops need to implement
the callback function and adjust the direct trampoline accordingly.
If DIRECT ops is attached before the IPMODIFY ops, ftrace core code calls
ENABLE_SHARE_IPMODIFY_PEER on the DIRECT ops before registering the
IPMODIFY ops.
If IPMODIFY ops is attached before the DIRECT ops, ftrace core code calls
ENABLE_SHARE_IPMODIFY_SELF in __ftrace_hash_update_ipmodify. Owner of the
DIRECT ops may return 0 if the DIRECT trampoline can share with IPMODIFY,
so error code otherwise. The error code is propagated to
register_ftrace_direct_multi so that onwer of the DIRECT trampoline can
handle it properly.
For more details, please refer to comment before enum ftrace_ops_cmd.
Merge tag 'riscv-for-linus-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Two kexec-related build fixes
- A DTS update to make the GPIO nodes match the upcoming dtschema
- A fix that passes -mno-relax directly to the assembler when building
modules, to work around compilers that fail to do so
* tag 'riscv-for-linus-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add as-options for modules with assembly compontents
riscv: dts: align gpio-key node names with dtschema
RISC-V: kexec: Fix build error without CONFIG_KEXEC
RISCV: kexec: Fix build error without CONFIG_MODULES
Merge tag 'acpi-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix yet another piece of ACPI CPPC changes fallout on AMD platforms
(Mario Limonciello)"
* tag 'acpi-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require flexible address space if X86_FEATURE_CPPC is supported
Brian Gix [Thu, 21 Jul 2022 23:22:25 +0000 (16:22 -0700)]
Bluetooth: Convert delayed discov_off to hci_sync
The timed ending of Discoverability was handled in hci_requst.c, with
calls using the deprecated hci_req_add() mechanism. Converted to live
inside mgmt.c using the same delayed work queue, but with hci_sync
version of hci_update_discoverable().
Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Merge tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Fix for a bad kfree() introduced in this cycle, and a quick fix for
disabling buffer recycling for IORING_OP_READV.
The latter will get reworked for 5.20, but it gets the job done for
5.19"
* tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
io_uring: do not recycle buffer in READV
io_uring: fix free of unallocated buffer list
PCI/ACPI: Update link to PCI firmware specification
The previous link to the PCI firmware specification in the comments
for drivers/pci/pci-acpi.c no longer works. Update the comment
to a current link to this specification.
Merge tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes and a typo fix"
* tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Change large transfer count reset logic to be unconditional
i2c: imx: fix typo in comment
i2c: mlxcpld: Fix register setting for 400KHz frequency
intel: thermal: PCH: Drop ACPI_FADT_LOW_POWER_S0 check
If ACPI_FADT_LOW_POWER_S0 is not set, this doesn't mean that low-power
S0 idle is not usable. It merely means that using S3 on the given
system is more beneficial from the energy saving perspective than using
low-power S0 idle, as long as S3 is supported.
Suspend-to-idle is still a valid suspend mode if ACPI_FADT_LOW_POWER_S0
is not set and the pm_suspend_via_firmware() check in pch_wpt_suspend()
is sufficient to distinguish suspend-to-idle from S3, so drop the
confusing ACPI_FADT_LOW_POWER_S0 check.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com>
Merge tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix several regmap usage issues in gpio-pca953x
- fix out-of-tree build for GPIO selftests
- fix integer overflow in gpio-xilinx
* tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: gpio-xilinx: Fix integer overflow
selftests: gpio: fix include path to kernel headers for out of tree builds
gpio: pca953x: use the correct register address when regcache sync during init
gpio: pca953x: use the correct range when do regmap sync
gpio: pca953x: only use single read/write for No AI mode
Merge tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Only driver fixes:
- NULL check for the ralink and sunplus drivers
- Add Jacky Bai as maintainer for the Freescale pin controllers
- Fix pin config ops for the Ocelot LAN966x and SparX5
- Disallow AMD pin control to be a module: the GPIO lines need to be
active in early boot, so no can do
- Fix the Armada 37xx to use raw spinlocks in the interrupt handler
path to avoid wait context"
* tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: armada-37xx: use raw spinlocks for regmap to avoid invalid wait context
pinctrl: armada-37xx: make irq_lock a raw spinlock to avoid invalid wait context
pinctrl: Don't allow PINCTRL_AMD to be a module
pinctrl: ocelot: Fix pincfg
pinctrl: ocelot: Fix pincfg for lan966x
MAINTAINERS: Update freescale pin controllers maintainer
pinctrl: sunplus: Add check for kcalloc
pinctrl: ralink: Check for null return of devm_kcalloc
Merge tag 'sound-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only undoes the Rockchip BCLK changes to address a regression"
* tag 'sound-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rockchip-i2s: Undo BCLK pinctrl changes
ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found
Merge tag 'drm-fixes-2022-07-22' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes for this week.
The main one is the i915 firmware fix for the phoronix reported issue.
I've written some firmware guidelines as a result, should land in
-next soon. Otherwise a few amdgpu fixes, a scheduler fix, ttm fix and
two other minor ones.
scheduler:
- scheduling while atomic fix
ttm:
- locking fix
edp:
- variable typo fix
i915:
- add back support for v69 firmware on ADL-P
amdgpu:
- Drop redundant buffer cleanup that can lead to a segfault
- Add a bo_list mutex to avoid possible list corruption in CS
- dmub notification fix
imx:
- fix error path"
* tag 'drm-fixes-2022-07-22' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2
drm/imx/dcss: Add missing of_node_put() in fail path
drm/i915/guc: support v69 in parallel to v70
drm/i915/guc: Support programming the EU priority in the GuC descriptor
drm/panel-edp: Fix variable typo when saving hpd absent delay from DT
drm/amdgpu: Remove one duplicated ef removal
drm/ttm: fix locking in vmap/vunmap TTM GEM helpers
drm/scheduler: Don't kill jobs in interrupt context
drm/amd/display: Fix new dmub notification enabling in DM
Bluetooth: MGMT: Fix holding hci_conn reference while command is queued
This removes the use of hci_conn_hold from Get Conn Info and Get Clock
Info since the callback can just do a lookup by address using the cmd
data and only then set cmd->user_data to pass to the complete callback.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
->writepage is only used for single page writeback from memory reclaim,
and not called at all for cgroup writeback. Follow the lead of XFS
and remove ->writepage and rely entirely on ->writepages.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
->writepage is only used for single page writeback from memory reclaim,
and not called at all for cgroup writeback. Follow the lead of XFS
and remove ->writepage and rely entirely on ->writepages.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
projects / people / ms / linux.git / log
