Tony Krowiak [Mon, 17 Aug 2020 19:19:44 +0000 (15:19 -0400)]
s390/vfio-ap: update docs to include dynamic config support
Update the documentation in vfio-ap.rst to include information about the
AP dynamic configuration support (e.g., hot plug of adapters, domains
and control domains via the matrix mediated device's sysfs assignment
attributes). This patch also makes a few minor tweaks to make corrections
and clarifications.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The on_config_changed callback is invoked at the start of the AP bus scan
function when it determines that the host AP configuration information
has changed since the previous scan.
The vfio_ap device driver registers a callback function for this callback
that performs the following operations:
1. Unplugs the adapters, domains and control domains removed from the
host's AP configuration from the guests to which they are
assigned in a single operation.
2. Stores bitmaps identifying the adapters, domains and control domains
added to the host's AP configuration with the structure representing
the mediated device. When the vfio_ap device driver's probe callback is
subsequently invoked, the probe function will recognize that the
queue is being probed due to a change in the host's AP configuration
and the plugging of the queue into the guest will be bypassed.
The on_scan_complete callback is invoked after the ap bus scan is
completed if the host AP configuration data has changed. The vfio_ap
device driver registers a callback function for this callback that hot
plugs each queue and control domain added to the AP configuration for each
guest using them in a single hot plug operation.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Tue, 10 Sep 2019 15:17:45 +0000 (11:17 -0400)]
s390/vfio-ap: sysfs attribute to display the guest's matrix
The matrix of adapters and domains configured in a guest's APCB may
differ from the matrix of adapters and domains assigned to the matrix mdev,
so this patch introduces a sysfs attribute to display the matrix of
adapters and domains that are or will be assigned to the APCB of a guest
that is or will be using the matrix mdev. For a matrix mdev denoted by
$uuid, the guest matrix can be displayed as follows:
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Thu, 30 Sep 2021 15:43:38 +0000 (11:43 -0400)]
s390/vfio-ap: implement in-use callback for vfio_ap driver
Let's implement the callback to indicate when an APQN
is in use by the vfio_ap device driver. The callback is
invoked whenever a change to the apmask or aqmask would
result in one or more queue devices being removed from the driver. The
vfio_ap device driver will indicate a resource is in use
if the APQN of any of the queue devices to be removed are assigned to
any of the matrix mdevs under the driver's control.
There is potential for a deadlock condition between the
matrix_dev->guests_lock used to lock the guest during assignment of
adapters and domains and the ap_perms_mutex locked by the AP bus when
changes are made to the sysfs apmask/aqmask attributes.
The AP Perms lock controls access to the objects that store the adapter
numbers (ap_perms) and domain numbers (aq_perms) for the sysfs
/sys/bus/ap/apmask and /sys/bus/ap/aqmask attributes. These attributes
identify which queues are reserved for the zcrypt default device drivers.
Before allowing a bit to be removed from either mask, the AP bus must check
with the vfio_ap device driver to verify that none of the queues are
assigned to any of its mediated devices.
The apmask/aqmask attributes can be written or read at any time from
userspace, so care must be taken to prevent a deadlock with asynchronous
operations that might be taking place in the vfio_ap device driver. For
example, consider the following:
1. A system administrator assigns an adapter to a mediated device under the
control of the vfio_ap device driver. The driver will need to first take
the matrix_dev->guests_lock to potentially hot plug the adapter into
the KVM guest.
2. At the same time, a system administrator sets a bit in the sysfs
/sys/bus/ap/ap_mask attribute. To complete the operation, the AP bus
must:
a. Take the ap_perms_mutex lock to update the object storing the values
for the /sys/bus/ap/ap_mask attribute.
b. Call the vfio_ap device driver's in-use callback to verify that the
queues now being reserved for the default zcrypt drivers are not
assigned to a mediated device owned by the vfio_ap device driver. To
do the verification, the in-use callback function takes the
matrix_dev->guests_lock, but has to wait because it is already held
by the operation in 1 above.
3. The vfio_ap device driver calls an AP bus function to verify that the
new queues resulting from the assignment of the adapter in step 1 are
not reserved for the default zcrypt device driver. This AP bus function
tries to take the ap_perms_mutex lock but gets stuck waiting for the
waiting for the lock due to step 2a above.
Consequently, we have the following deadlock situation:
matrix_dev->guests_lock locked (1)
ap_perms_mutex lock locked (2a)
Waiting for matrix_dev->gusts_lock (2b) which is currently held (1)
Waiting for ap_perms_mutex lock (3) which is currently held (2a)
To prevent this deadlock scenario, the function called in step 3 will no
longer take the ap_perms_mutex lock and require the caller to take the
lock. The lock will be the first taken by the adapter/domain assignment
functions in the vfio_ap device driver to maintain the proper locking
order.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Wed, 25 Aug 2021 19:00:25 +0000 (15:00 -0400)]
s390/vfio-ap: reset queues after adapter/domain unassignment
When an adapter or domain is unassigned from an mdev attached to a KVM
guest, one or more of the guest's queues may get dynamically removed. Since
the removed queues could get re-assigned to another mdev, they need to be
reset. So, when an adapter or domain is unassigned from the mdev, the
queues that are removed from the guest's AP configuration (APCB) will be
reset.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Tue, 1 Feb 2022 15:52:29 +0000 (10:52 -0500)]
s390/vfio-ap: hot plug/unplug of AP devices when probed/removed
When an AP queue device is probed or removed, if the mediated device is
attached to a KVM guest, the mediated device's adapter, domain and
control domain bitmaps must be filtered to update the guest's APCB and if
any changes are detected, the guest's APCB must then be hot plugged into
the guest to reflect those changes to the guest.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Mon, 31 Jan 2022 23:35:47 +0000 (18:35 -0500)]
s390/vfio-ap: allow hot plug/unplug of AP devices when assigned/unassigned
Let's hot plug an adapter, domain or control domain into the guest when it
is assigned to a matrix mdev that is attached to a KVM guest. Likewise,
let's hot unplug an adapter, domain or control domain from the guest when
it is unassigned from a matrix_mdev that is attached to a KVM guest.
Whenever an assignment or unassignment of an adapter, domain or control
domain is performed, the APQNs and control domains assigned to the matrix
mdev will be filtered and assigned to the AP control block
(APCB) that supplies the AP configuration to the guest so that no
adapter, domain or control domain that is not in the host's AP
configuration nor any APQN that does not reference a queue device bound
to the vfio_ap device driver is assigned.
After updating the APCB, if the mdev is in use by a KVM guest, it is
hot plugged into the guest to dynamically provide access to the adapters,
domains and control domains provided via the newly refreshed APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Thu, 17 Mar 2022 16:19:04 +0000 (12:19 -0400)]
s390/vfio-ap: prepare for dynamic update of guest's APCB on queue probe/remove
The callback functions for probing and removing a queue device must take
and release the locks required to perform a dynamic update of a guest's
APCB in the proper order.
A new helper function is introduced to be used by the probe callback to
acquire the required locks. Since the probe callback only has
access to a queue device when it is called, the helper function will find
the ap_matrix_mdev object to which the queue device's APQN is assigned and
return it so the KVM guest to which the mdev is attached can be dynamically
updated.
Note that in order to find the ap_matrix_mdev (matrix_mdev) object, it is
necessary to search the matrix_dev->mdev_list. This presents a
locking order dilemma because the matrix_dev->mdevs_lock can't be taken to
protect against changes to the list while searching for the matrix_mdev to
which a queue device's APQN is assigned. This is due to the fact that the
proper locking order requires that the matrix_dev->mdevs_lock be taken
after both the matrix_mdev->kvm->lock and the matrix_dev->mdevs_lock.
Consequently, the matrix_dev->guests_lock will be used to protect against
removal of a matrix_mdev object from the list while a queue device is
being probed. This necessitates changes to the mdev probe/remove
callback functions to take the matrix_dev->guests_lock prior to removing
a matrix_mdev object from the list.
A new macro is also introduced to acquire the locks required to dynamically
update the guest's APCB in the proper order when a queue device is
removed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Thu, 17 Mar 2022 02:21:38 +0000 (22:21 -0400)]
s390/vfio-ap: prepare for dynamic update of guest's APCB on assign/unassign
The functions backing the matrix mdev's sysfs attribute interfaces to
assign/unassign adapters, domains and control domains must take and
release the locks required to perform a dynamic update of a guest's APCB
in the proper order.
Two new macros are introduced for this purpose: One to take the locks and
the other to release the locks. These macros will be used by the
assignment/unassignment functions to prepare for dynamic update of
the KVM guest's APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Wed, 16 Mar 2022 21:46:38 +0000 (17:46 -0400)]
s390/vfio-ap: use proper locking order when setting/clearing KVM pointer
The group notifier that handles the VFIO_GROUP_NOTIFY_SET_KVM event must
use the required locks in proper locking order to dynamically update the
guest's APCB. The proper locking order is:
1. matrix_dev->guests_lock: required to use the KVM pointer to
update a KVM guest's APCB.
2. matrix_mdev->kvm->lock: required to update a KVM guest's APCB.
3. matrix_dev->mdevs_lock: required to store or access the data
stored in a struct ap_matrix_mdev instance.
Two macros are introduced to acquire and release the locks in the proper
order. These macros are now used by the group notifier functions.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Fri, 24 Sep 2021 02:21:58 +0000 (22:21 -0400)]
s390/vfio-ap: introduce new mutex to control access to the KVM pointer
The vfio_ap device driver registers for notification when the pointer to
the KVM object for a guest is set. Recall that the KVM lock (kvm->lock)
mutex must be taken outside of the matrix_dev->lock mutex to prevent the
reporting by lockdep of a circular locking dependency (a.k.a., a lockdep
splat):
* see commit 0cc00c8d4050 ("Fix circular lockdep when setting/clearing
crypto masks")
* see commit 86956e70761b ("replace open coded locks for
VFIO_GROUP_NOTIFY_SET_KVM notification")
With the introduction of support for hot plugging/unplugging AP devices
passed through to a KVM guest, a new guests_lock mutex is introduced to
ensure the proper locking order is maintained:
The matrix_dev->guests_lock controls access to the matrix_mdev instances
that hold the state for AP devices that have been passed through to a
KVM guest. This lock must be held to control access to the KVM pointer
(matrix_mdev->kvm) while the vfio_ap device driver is using it to
plug/unplug AP devices passed through to the KVM guest.
Keep in mind, the proper locking order must be maintained whenever
dynamically updating a KVM guest's APCB to plug/unplug adapters, domains
and control domains:
1. matrix_dev->guests_lock: required to use the KVM pointer - stored in
a struct ap_matrix_mdev instance - to update a KVM guest's APCB
2. matrix_mdev->kvm->lock: required to update a guest's APCB
3. matrix_dev->mdevs_lock: required to access data stored in a
struct ap_matrix_mdev instance.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Wed, 16 Mar 2022 16:23:12 +0000 (12:23 -0400)]
s390/vfio-ap: rename matrix_dev->lock mutex to matrix_dev->mdevs_lock
The matrix_dev->lock mutex is being renamed to matrix_dev->mdevs_lock to
better reflect its purpose, which is to control access to the state of the
mediated devices under the control of the vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Tue, 15 Dec 2020 02:14:54 +0000 (21:14 -0500)]
s390/vfio-ap: allow assignment of unavailable AP queues to mdev device
The current implementation does not allow assignment of an AP adapter or
domain to an mdev device if each APQN resulting from the assignment
does not reference an AP queue device that is bound to the vfio_ap device
driver. This patch allows assignment of AP resources to the matrix mdev as
long as the APQNs resulting from the assignment:
1. Are not reserved by the AP BUS for use by the zcrypt device drivers.
2. Are not assigned to another matrix mdev.
The rationale behind this is that the AP architecture does not preclude
assignment of APQNs to an AP configuration profile that are not available
to the system.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Wed, 11 Aug 2021 20:23:05 +0000 (16:23 -0400)]
s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev
Refresh the guest's APCB by filtering the APQNs and control domain numbers
assigned to the matrix mdev.
Filtering of APQNs:
-----------------
APQNs that do not reference an AP queue device bound to the vfio_ap device
driver must be filtered from the APQNs assigned to the matrix mdev before
they can be assigned to the guest's APCB. Given that the APQNs are
configured in the guest's APCB as a matrix of APIDs (adapters) and APQIs
(domains), it is not possible to filter an individual APQN. For example,
suppose the matrix of APQNs is structured as follows:
Now suppose APQN (4,1) does not reference a queue device bound to the
vfio_ap device driver. If we filter APID 4, the APQNs (4,0), (4,1) and
(4,2) will be removed. Similarly, if we filter domain 1, APQNs (3,1),
(4,1) and (5,1) will be removed.
To resolve this dilemma, the choice was made to filter the APID - in this
case 4 - from the guest's APCB. The reason for this design decision is
because the APID references an AP adapter which is a real hardware device
that can be physically installed, removed, enabled or disabled; whereas, a
domain is a partition within the adapter. It therefore better reflects
reality to remove the APID from the guest's APCB.
Filtering of control domains:
----------------------------
Any control domains that are not assigned to the host's AP configuration
will be filtered from those assigned to the matrix mdev before assigning
them to the guest's APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Wed, 11 Dec 2019 20:35:54 +0000 (15:35 -0500)]
s390/vfio-ap: introduce shadow APCB
The APCB is a field within the CRYCB that provides the AP configuration
to a KVM guest. Let's introduce a shadow copy of the KVM guest's APCB and
maintain it for the lifespan of the guest.
The shadow APCB serves the following purposes:
1. The shadow APCB can be maintained even when the mediated device is not
currently in use by a KVM guest. Since the mediated device's AP
configuration is filtered to ensure that no AP queues are passed through
to the KVM guest that are not bound to the vfio_ap device driver or
available to the host, the mediated device's AP configuration may differ
from the guest's. Having a shadow of a guest's APCB allows us to provide
a sysfs interface to view the guest's APCB even if the mediated device
is not currently passed through to a KVM guest. This can aid in
problem determination when the guest is unexpectedly missing AP
resources.
2. If filtering was done in-place for the real APCB, the guest could pick
up a transient state. Doing the filtering on a shadow and transferring
the AP configuration to the real APCB after the guest is started or when
AP resources are assigned to or unassigned from the mediated device, or
when the host configuration changes, the guest's AP configuration will
never be in a transient state.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Mon, 1 Feb 2021 16:18:09 +0000 (11:18 -0500)]
s390/vfio-ap: manage link between queue struct and matrix mdev
Let's create links between each queue device bound to the vfio_ap device
driver and the matrix mdev to which the queue's APQN is assigned. The idea
is to facilitate efficient retrieval of the objects representing the queue
devices and matrix mdevs as well as to verify that a queue assigned to
a matrix mdev is bound to the driver.
The links will be created as follows:
* When the queue device is probed, if its APQN is assigned to a matrix
mdev, the structures representing the queue device and the matrix mdev
will be linked.
* When an adapter or domain is assigned to a matrix mdev, for each new
APQN assigned that references a queue device bound to the vfio_ap
device driver, the structures representing the queue device and the
matrix mdev will be linked.
The links will be removed as follows:
* When the queue device is removed, if its APQN is assigned to a matrix
mdev, the link from the structure representing the matrix mdev to the
structure representing the queue will be removed. Since the storage
allocated for the vfio_ap_queue will be freed, there is no need to
remove the link to the matrix_mdev to which the queue's APQN is
assigned.
* When an adapter or domain is unassigned from a matrix mdev, for each
APQN unassigned that references a queue device bound to the vfio_ap
device driver, the structures representing the queue device and the
matrix mdev will be unlinked.
* When an mdev is removed, the link from any queues assigned to the mdev
to the mdev will be removed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Wed, 14 Oct 2020 19:34:49 +0000 (15:34 -0400)]
s390/vfio-ap: move probe and remove callbacks to vfio_ap_ops.c
Let's move the probe and remove callbacks into the vfio_ap_ops.c
file to keep all code related to managing queues in a single file. This
way, all functions related to queue management can be removed from the
vfio_ap_private.h header file defining the public interfaces for the
vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tony Krowiak [Thu, 28 Jan 2021 20:53:07 +0000 (15:53 -0500)]
s390/vfio-ap: use new AP bus interface to search for queue devices
This patch refactors the vfio_ap device driver to use the AP bus's
ap_get_qdev() function to retrieve the vfio_ap_queue struct containing
information about a queue that is bound to the vfio_ap device driver.
The bus's ap_get_qdev() function retrieves the queue device from a
hashtable keyed by APQN. This is much more efficient than looping over
the list of devices attached to the AP bus by several orders of
magnitude.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The remove() operation unconditionally frees the interrupt for the device
but we may not actually have an interrupt so there might be nothing to
free. Since the interrupt is requested after all other resources we don't
need the explicit free anyway, unwinding is guaranteed to be safe, so just
delete the remove() function and let devm take care of things.
On a number of platforms that contain acp3x controller a new ERR level
message is showing up:
`acp6x pci device not found`
This is because ACP3x and ACP6x share same PCI ID but can be identified
by PCI revision. As this is expected behavior for a system with ACP3x
decrease message to debug.
Fixes: b1630fcbfde6c ("ASoC: amd: yc: add new YC platform varaint support") Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220718213402.19497-1-mario.limonciello@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
Wang Jiada [Mon, 18 Jul 2022 11:04:04 +0000 (20:04 +0900)]
ASoC: rsnd: ssiu: add missing .quit callback for gen2
commit 83b220cf8eb2a ("ASoC: rsnd: implement BUSIF related
code in ssiu.c") moved BUSIF related code in ssiu.c
which added .quit callback in ssiu.c to disable error irq
when ssiu quits.
But .quit callback was added only for gen1 and is missing
for gen2, this causes error irq is left enabled after ssiu
quits on gen2.
This commit adds missing .quit callback for gen2
Signed-off-by: Wang Jiada <jiada_wang@mentor.com> Cc: Dean Jenkins <Dean_Jenkins@mentor.com> Cc: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20220718110404.1529085-1-jiwang_wang@mentor.com Signed-off-by: Mark Brown <broonie@kernel.org>
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
NOMAP irq domains use the revmap_size field to indicate the maximum
hwirq number the domain accepts. This is a bit confusing as
revmap_size is usually used to indicate the size of the revmap array,
which a NOMAP domain doesn't have.
Instead, use the hwirq_max field which has the correct semantics, and
keep revmap_size to 0 for a NOMAP domain.
When using a NOMAP domain, __irq_resolve_mapping() doesn't store
the Linux IRQ number at the address optionally provided by the caller.
While this isn't a huge deal (the returned value is guaranteed
to the hwirq that was passed as a parameter), let's honour the letter
of the API by writing the expected value.
KVM: s390: pv: don't present the ecall interrupt twice
When the SIGP interpretation facility is present and a VCPU sends an
ecall to another VCPU in enabled wait, the sending VCPU receives a 56
intercept (partial execution), so KVM can wake up the receiving CPU.
Note that the SIGP interpretation facility will take care of the
interrupt delivery and KVM's only job is to wake the receiving VCPU.
For PV, the sending VCPU will receive a 108 intercept (pv notify) and
should continue like in the non-PV case, i.e. wake the receiving VCPU.
For PV and non-PV guests the interrupt delivery will occur through the
SIGP interpretation facility on SIE entry when SIE finds the X bit in
the status field set.
However, in handle_pv_notification(), there was no special handling for
SIGP, which leads to interrupt injection being requested by KVM for the
next SIE entry. This results in the interrupt being delivered twice:
once by the SIGP interpretation facility and once by KVM through the
IICTL.
Add the necessary special handling in handle_pv_notification(), similar
to handle_partial_execution(), which simply wakes the receiving VCPU and
leave interrupt delivery to the SIGP interpretation facility.
In contrast to external calls, emergency calls are not interpreted but
also cause a 108 intercept, which is why we still need to call
handle_instruction() for SIGP orders other than ecall.
Since kvm_s390_handle_sigp_pei() is now called for all SIGP orders which
cause a 108 intercept - even if they are actually handled by
handle_instruction() - move the tracepoint in kvm_s390_handle_sigp_pei()
to avoid possibly confusing trace messages.
Merge the new SoC support from Tomer Maimon:
"This patchset adds initial support for the Nuvoton
Arbel NPCM8XX Board Management controller (BMC) SoC family.
The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
The NPCM8XX computing subsystem comprises a quadcore ARM
Cortex A35 ARM-V8 architecture.
This patchset adds minimal architecture and drivers such as:
Clocksource, Clock, Reset, and WD.
Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
This patchset was tested on the Arbel NPCM8XX evaluation board."
I'm leaving out the clk controller driver, which is still under
review.
* nuvoton/newsoc:
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
Updated the NPCM reset driver to add support for Nuvoton BMC NPCM8XX SoC.
As part of adding NPCM8XX support:
- Add NPCM8XX specific compatible string.
- Add NPCM8XX USB reset.
- Add data to handle architecture-specific reset parameters.
- Some of the Reset Id and number of resets are different from NPCM7XX.
Merge tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.20 (part 1)
Add support for Marvell 98DX2530 (and variants)
* tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: marvell: enable the 98DX2530 pinctrl driver
arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
dt-bindings: marvell: Document the AC5/AC5X compatibles
Paolo Bonzini [Tue, 19 Jul 2022 13:16:53 +0000 (09:16 -0400)]
tools headers UAPI: Sync linux/kvm.h with the kernel sources
Silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yang Xu [Thu, 14 Jul 2022 06:11:26 +0000 (14:11 +0800)]
fs: Add missing umask strip in vfs_tmpfile
All creation paths except for O_TMPFILE handle umask in the vfs directly
if the filesystem doesn't support or enable POSIX ACLs. If the filesystem
does then umask handling is deferred until posix_acl_create().
Because, O_TMPFILE misses umask handling in the vfs it will not honor
umask settings. Fix this by adding the missing umask handling.
Link: https://lore.kernel.org/r/1657779088-2242-2-git-send-email-xuyang2018.jy@fujitsu.com Fixes: 60545d0d4610 ("[O_TMPFILE] it's still short a few helpers, but infrastructure should be OK now...") Cc: <stable@vger.kernel.org> # 4.19+ Reported-by: Christian Brauner (Microsoft) <brauner@kernel.org> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Yang Xu [Thu, 14 Jul 2022 06:11:25 +0000 (14:11 +0800)]
fs: add mode_strip_sgid() helper
Add a dedicated helper to handle the setgid bit when creating a new file
in a setgid directory. This is a preparatory patch for moving setgid
stripping into the vfs. The patch contains no functional changes.
Currently the setgid stripping logic is open-coded directly in
inode_init_owner() and the individual filesystems are responsible for
handling setgid inheritance. Since this has proven to be brittle as
evidenced by old issues we uncovered over the last months (see [1] to
[3] below) we will try to move this logic into the vfs.
Link: e014f37db1a2 ("xfs: use setattr_copy to set vfs inode attributes") [1]
Link: 01ea173e103e ("xfs: fix up non-directory creation in SGID directories") [2]
Link: fd84bfdddd16 ("ceph: fix up non-directory creation in SGID directories") [3] Link: https://lore.kernel.org/r/1657779088-2242-1-git-send-email-xuyang2018.jy@fujitsu.com Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Chris Packham [Tue, 5 Jul 2022 19:09:20 +0000 (22:09 +0300)]
arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
The 98DX2530 SoC is the Control and Management CPU integrated into
the Marvell 98DX25xx and 98DX35xx series of switch chip (internally
referred to as AlleyCat5 and AlleyCat5X).
These files have been taken from the Marvell SDK and lightly cleaned
up with the License and copyright retained.
gregory.clement: use specific cpu type: cortex-a55 instead of armv8 in
cpu nodes, armv8 being reserved for the arm virtual models that are
not meant to implement a particular CPU type.
Merge tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.20 (part 1)
Enable LED to link/activity on turris-omnia (Armada 385 based)
* tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: enable LED controller node
ARM: dts: turris-omnia: configure LED[0] pin function to link/activity
KVM: selftests: Fix target thread to be migrated in rseq_test
In rseq_test, there are two threads, which are vCPU thread and migration
worker separately. Unfortunately, the test has the wrong PID passed to
sched_setaffinity() in the migration worker. It forces migration on the
migration worker because zeroed PID represents the calling thread, which
is the migration worker itself. It means the vCPU thread is never enforced
to migration and it can migrate at any time, which eventually leads to
failure as the following logs show.
host# uname -r
5.19.0-rc6-gavin+
host# # cat /proc/cpuinfo | grep processor | tail -n 1
processor : 223
host# pwd
/home/gavin/sandbox/linux.main/tools/testing/selftests/kvm
host# for i in `seq 1 100`; do \
echo "--------> $i"; ./rseq_test; done
--------> 1
--------> 2
--------> 3
--------> 4
--------> 5
--------> 6
==== Test Assertion Failure ====
rseq_test.c:265: rseq_cpu == cpu
pid=3925 tid=3925 errno=4 - Interrupted system call
1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2)
2 0x0000ffffb044affb: ?? ??:0
3 0x0000ffffb044b0c7: ?? ??:0
4 0x0000000000401a6f: _start at ??:?
rseq CPU = 4, sched CPU = 27
Fix the issue by passing correct parameter, TID of the vCPU thread, to
sched_setaffinity() in the migration worker.
Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220719020830.3479482-1-gshan@redhat.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add dt-binding documentation of auxadc for MediaTek MT8188 SoC platform.
Signed-off-by: Hui.Liu <hui.liu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220719014657.28714-2-hui.liu@mediatek.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Claudio Imbrenda [Tue, 28 Jun 2022 13:56:13 +0000 (15:56 +0200)]
KVM: s390: pv: destroy the configuration before its memory
Move the Destroy Secure Configuration UVC before the loop to destroy
the memory. If the protected VM has memory, it will be cleaned up and
made accessible by the Destroy Secure Configuration UVC. The struct
page for the relevant pages will still have the protected bit set, so
the loop is still needed to clean that up.
Switching the order of those two operations does not change the
outcome, but it is significantly faster.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-13-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-13-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Claudio Imbrenda [Tue, 28 Jun 2022 13:56:10 +0000 (15:56 +0200)]
KVM: s390: pv: add mmu_notifier
Add an mmu_notifier for protected VMs. The callback function is
triggered when the mm is torn down, and will attempt to convert all
protected vCPUs to non-protected. This allows the mm teardown to use
the destroy page UVC instead of export.
Also make KVM select CONFIG_MMU_NOTIFIER, needed to use mmu_notifiers.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Nico Boehr <nrb@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-10-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-10-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Conflict resolution for mmu_notifier.h include
and struct kvm_s390_pv] Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
Document RZ/V2L (R9A07G054) IRQC bindings. The RZ/V2L IRQC block is
identical to one found on the RZ/G2L SoC. No driver changes are
required as generic compatible string "renesas,rzg2l-irqc" will be
used as a fallback.
While at it, update the comment "# RZ/G2L" to "# RZ/G2{L,LC}" for
"renesas,r9a07g044-irqc" compatible string as both RZ/G2L and
RZ/G2LC SoC's use the common SoC DTSI and have the same IRQC block.
====================
amt: fix validation and synchronization bugs
There are some synchronization issues in the amt module.
Especially, an amt gateway doesn't well synchronize its own variables
and status(amt->status).
It tries to use a workqueue for handles in a single thread.
A global lock is also good, but it would occur complex locking complex.
In this patchset, only the gateway uses workqueue.
The reason why only gateway interface uses workqueue is that gateway
should manage its own states and variables a little bit statefully.
But relay doesn't need to manage tunnels statefully, stateless is okay.
So, relay side message handlers are okay to be called concurrently.
But it doesn't mean that no lock is needed.
Only amt multicast data message type will not be processed by the work
queue because It contains actual multicast data.
So, it should be processed immediately.
When any amt gateway events are triggered(sending discovery message by
delayed_work, sending request message by delayed_work and receiving
messages), it stores event and skb into the event queue(amt->events[16]).
Then, workqueue processes these events one by one.
The first patch is to use the work queue.
The second patch is to remove unnecessary lock due to a previous patch.
The third patch is to use READ_ONCE() in the amt module.
Even if the amt module uses a single thread, some variables (ready4,
ready6, amt->status) can be accessed concurrently.
The fourth patch is to add missing nonce generation logic when it sends a
new request message.
The fifth patch is to drop unexpected advertisement messages.
advertisement message should be received only after the gateway sends
a discovery message first.
So, the gateway should drop advertisement messages if it has never
sent a discovery message and it also should drop duplicate advertisement
messages.
Using nonce is good to distinguish whether a received message is an
expected message or not.
The sixth patch is to drop unexpected query messages.
This is the same behavior as the fourth patch.
Query messages should be received only after the gateway sends a request
message first.
The nonce variable is used to distinguish whether it is a reply to a
previous request message or not.
amt->ready4 and amt->ready6 are used to distinguish duplicate messages.
The seventh patch is to drop unexpected multicast data.
AMT gateway should not receive multicast data message type before
establish between gateway and relay.
In order to drop unexpected multicast data messages, it checks amt->status.
The last patch is to fix a locking problem on the relay side.
amt->nr_tunnels variable is protected by amt->lock.
But amt_request_handler() doesn't protect this variable.
v2:
- Use local_bh_disable() instead of rcu_read_lock_bh() in
amt_membership_query_handler.
- Fix using uninitialized variables.
- Fix unexpectedly start the event_wq after stopping.
- Fix possible deadlock in amt_event_work().
- Add a limit variable in amt_event_work() to prevent infinite working.
- Rename amt_queue_events() to amt_queue_event().
====================
amt->nr_tunnels is protected by amt->lock.
But, amt_request_handler() has been using this variable without the
amt->lock.
So, it expands context of amt->lock in the amt_request_handler() to
protect amt->nr_tunnels variable.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected multicast data.
Multicast data message type should be received after sending an update
message, which means all establishment between gateway and relay is
finished.
So, amt_multicast_data_handler() checks amt->status.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected query messages.
In order to drop unexpected query messages, it checks nonce.
And it also checks ready4 and ready6 variables to drop duplicated messages.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected advertisement messages.
In order to drop these packets, it should check nonce and amt->status.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
amt: add missing regeneration nonce logic in request logic
When AMT gateway starts sending a new request message, it should
regenerate the nonce variable.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are some data races in the amt module.
amt->ready4, amt->ready6, and amt->status can be accessed concurrently
without locks.
So, it uses READ_ONCE() and WRITE_ONCE().
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
By the previous patch, amt gateway handlers are changed to worked by
a single thread.
So, most locks for gateway are not needed.
So, it removes.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
amt: use workqueue for gateway side message handling
There are some synchronization issues(amt->status, amt->req_cnt, etc)
if the interface is in gateway mode because gateway message handlers
are processed concurrently.
This applies a work queue for processing these messages instead of
expanding the locking context.
So, the purposes of this patch are to fix exist race conditions and to make
gateway to be able to validate a gateway status more correctly.
When the AMT gateway interface is created, it tries to establish to relay.
The establishment step looks stateless, but it should be managed well.
In order to handle messages in the gateway, it saves the current
status(i.e. AMT_STATUS_XXX).
This patch makes gateway code to be worked with a single thread.
Now, all messages except the multicast are triggered(received or
delay expired), and these messages will be stored in the event
queue(amt->events).
Then, the single worker processes stored messages asynchronously one
by one.
The multicast data message type will be still processed immediately.
Now, amt->lock is only needed to access the event queue(amt->events)
if an interface is the gateway mode.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220717135831.2492844-2-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add spi_device_id entries to silent following warnings:
SPI driver sja1105 has no spi_device_id for nxp,sja1105e
SPI driver sja1105 has no spi_device_id for nxp,sja1105t
SPI driver sja1105 has no spi_device_id for nxp,sja1105p
SPI driver sja1105 has no spi_device_id for nxp,sja1105q
SPI driver sja1105 has no spi_device_id for nxp,sja1105r
SPI driver sja1105 has no spi_device_id for nxp,sja1105s
SPI driver sja1105 has no spi_device_id for nxp,sja1110a
SPI driver sja1105 has no spi_device_id for nxp,sja1110b
SPI driver sja1105 has no spi_device_id for nxp,sja1110c
SPI driver sja1105 has no spi_device_id for nxp,sja1110d
Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220717135831.2492844-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sungbo Eo [Fri, 23 Jul 2021 14:12:32 +0000 (23:12 +0900)]
mtd: spi-nor: esmt: Use correct name of f25l32qa
The flash ID of F25L32QA is 0x8c4016, whereas that of F25L32QA(2S) is
0x8c4116. F25L32QA(2S) is the newer version of F25L32QA and its BPn bits
are non-volatile, unlike its older version.
Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20210723141232.15659-1-mans0n@gorani.run
Datasheet: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA.pdf
Datasheet: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA_1(2S).pdf
Lee Jones [Thu, 14 Jul 2022 11:25:32 +0000 (12:25 +0100)]
dt-bindings: mfd: syscon: Update Lee Jones' email address
Going forward, I'll be using my kernel.org for upstream work.
Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: devicetree@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220714112533.539910-8-lee@kernel.org
John Johansen [Sat, 26 Mar 2022 08:46:18 +0000 (01:46 -0700)]
apparmor: allow label to carry debug flags
Allow labels to have debug flags that can be used to trigger debug output
only from profiles/labels that are marked. This can help reduce debug
output by allowing debug to be target to a specific confinement condition.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Samuel Holland [Sat, 2 Jul 2022 18:40:43 +0000 (13:40 -0500)]
mfd: sun6i-prcm: Update Kconfig description
This driver is used by a specific range of SoCs between when the PRCM
hardware was introduced (A31) and when the PRCM CCU driver was added
(A83T). It is unlikely to be extended to additional hardware. Update
the description to include the full list of applicable SoCs.
Andy Shevchenko [Tue, 28 Jun 2022 22:17:45 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Use sysfs_emit() instead of sprintf()
sysfs_emit() is preferred over sprintf() when formatting the value to be
returned to user space in show() functions, because it knows about sysfs
buffer specifics and has sanity checks.
Andy Shevchenko [Tue, 28 Jun 2022 22:17:42 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based kernel configuration guards.
projects / people / ms / linux.git / log
