smb: server: make sure we call ib_dma_unmap_single() only if we called ib_dma_map_single already
In case of failures either ib_dma_map_single() might not be called yet
or ib_dma_unmap_single() was already called.
We should make sure put_recvmsg() only calls ib_dma_unmap_single() if needed.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
There's no need to maintain two lists, we can just
have a single list of receive buffers, which are free to use.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Takashi Iwai [Wed, 6 Aug 2025 18:20:25 +0000 (20:20 +0200)]
Merge tag 'asoc-fix-v6.17-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
This is a relatively small set of fixes and device quirks that came in
during the merge window, the AMD changes adding support for ACP 7.2
systems are all just adding IDs for the devices rather than any
substantial code - the actual code is the same as for prior versions of
the platform.
Colin Ian King [Wed, 23 Jul 2025 09:53:15 +0000 (10:53 +0100)]
mailbox: bcm74110: Fix spelling mistake
There is a spelling mistake in the author's email address. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Justin Chen <justin.chen@broadcom.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
mailbox: aspeed: add mailbox driver for AST27XX series SoC
Add mailbox controller driver for AST27XX SoCs, which provides
independent tx/rx mailbox between different processors. There are 4
channels for each tx/rx mailbox and each channel has an 32-byte FIFO.
Providers DTS examples should not contain consumer nodes, because they
are completely redundant, obvious (defined in common schema) and add
unnecessary bloat. Drop consumer examples and unneeded node labels.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Lists should have fixed constraint, so add missing maxItems to the "reg"
property. Since minItems=maxItems, the minItems is implied by dtschema
so can be dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Lists should have fixed constraint, so add missing maxItems to the
"interrupts" property. Since minItems=maxItems, the minItems is implied
by dtschema so can be dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
Sakari Ailus [Wed, 25 Jun 2025 08:15:01 +0000 (11:15 +0300)]
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
__pm_runtime_put_autosuspend() was meant to be used by callers that needed
to put the Runtime PM usage_count without marking the device's last busy
timestamp. It was however seen that the Runtime PM autosuspend related
functions should include that call. Thus switch the driver to
use pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Linus Torvalds [Wed, 6 Aug 2025 12:52:56 +0000 (15:52 +0300)]
Merge tag 'for-6.17-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A single btrfs commit. It fixes a problem that people started to hit
since 6.15.3 during log replay (e.g. after a crash).
The bug is old but got more likely to happen since commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion") got backported to stable (6.15 only)"
* tag 'for-6.17-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix log tree replay failure due to file with 0 links and extents
Linus Torvalds [Wed, 6 Aug 2025 12:44:25 +0000 (15:44 +0300)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
The hda-sdw-bpt code links against the soundwire driver, but that fails when
trying to link from built-in code into loadable module:
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_close_stream.isra.0':
intel_ace2x.c:(.text+0x137a531): undefined reference to `hda_sdw_bpt_close'
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_send_async':
intel_ace2x.c:(.text+0x137aa45): undefined reference to `hda_sdw_bpt_open'
x86_64-linux-ld: intel_ace2x.c:(.text+0x137ab67): undefined reference to `hda_sdw_bpt_close'
x86_64-linux-ld: intel_ace2x.c:(.text+0x137ac30): undefined reference to `hda_sdw_bpt_send_async'
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_wait':
intel_ace2x.c:(.text+0x137aced): undefined reference to `hda_sdw_bpt_wait'
Ensure that both SOUNDWIRE_INTEL and SND_SOF_SOF_HDA_SDW_BPT are selected
at the same time by SND_SOC_SOF_INTEL_LNL, and that this happens even if
SND_SOC_SOF_INTEL_SOUNDWIRE is a loadable module but SND_SOC_SOF_INTEL_LNL
is built-in.
This follows the same logic as commit c5a61db9bf89 ("ASoC: SOF: fix
intel-soundwire link failure").
Fixes: 5d5cb86fb46e ("ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20250805160451.4004602-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Filipe Manana [Wed, 30 Jul 2025 18:18:37 +0000 (19:18 +0100)]
btrfs: fix log tree replay failure due to file with 0 links and extents
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
Arnd Bergmann [Tue, 5 Aug 2025 16:09:49 +0000 (18:09 +0200)]
irqchip: Build IMX_MU_MSI only on ARM
Compile-testing IMX_MU_MSI on x86 without PCI_MSI support results in a
build failure:
drivers/gpio/gpio-sprd.c:8:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
drivers/iommu/iommufd/viommu.c:4:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
Tighten the dependency further to only allow compile testing on Arm.
This could be refined further to allow certain x86 configs.
This was submitted before to address a different build failure, which was
fixed differently, but the problem has now returned in a different form.
Brian Norris [Tue, 5 Aug 2025 18:32:20 +0000 (11:32 -0700)]
genirq/test: Resolve irq lock inversion warnings
irq_shutdown_and_deactivate() is normally called with the descriptor lock
held, and interrupts disabled. Nested a few levels down, it grabs the
global irq_resend_lock. Lockdep rightfully complains when interrupts are
not disabled:
Thorsten Blum [Tue, 5 Aug 2025 23:41:53 +0000 (01:41 +0200)]
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.
Use the destination buffer size instead to ensure the card name is
copied correctly.
Cc: stable@vger.kernel.org Fixes: 75b1a8f9d62e ("ALSA: Convert strlcpy to strscpy when return value is unused") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Wed, 6 Aug 2025 05:52:59 +0000 (08:52 +0300)]
Merge tag 'ata-6.17-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Cleanup whitespace in messages in libata-core and the pata_pdc2027x,
pata_macio drivers (Colin)
- Fix ata_to_sense_error() to avoid seeing nonsensical sense data for
rare cases where we fail to get sense data from the drive. The
complementary fix to this is to ensure that we always return the
generic "ABORTED COMMAND" sense data for a failed command for which
we have no status or error fields
- The recent changes to link power management (LPM) which now prevent
the user from attempting to set an LPM policy through the
link_power_management_policy caused some regressions in test
environments because of the error that is now returned when writing
to that attribute when LPM is not supported. To allow users to not
trip on this, introduce the new link_power_management_supported
attribute to allow simple testing of a port/device LPM support (me)
* tag 'ata-6.17-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_pdc2027x: Remove space before newline and abbreviations
ata: pata_macio: Remove space before newline
ata: libata-core: Remove space before newline
ata: libata-sata: Add link_power_management_supported sysfs attribute
ata: libata-scsi: Return aborted command when missing sense and result TF
ata: libata-scsi: Fix ata_to_sense_error() status handling
Linus Torvalds [Wed, 6 Aug 2025 04:32:52 +0000 (07:32 +0300)]
Merge tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
Sasha Levin [Tue, 5 Aug 2025 12:58:20 +0000 (08:58 -0400)]
media: venus: Fix OPP table error handling
The venus driver fails to check if dev_pm_opp_find_freq_{ceil,floor}()
returns an error pointer before calling dev_pm_opp_put(). This causes
a crash when OPP tables are not present in device tree.
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 000000000000002e
...
pc : dev_pm_opp_put+0x1c/0x4c
lr : core_clks_enable+0x4c/0x16c [venus_core]
Add IS_ERR() checks before calling dev_pm_opp_put() to avoid
dereferencing error pointers.
Fixes: b179234b5e59 ("media: venus: pm_helpers: use opp-table for the frequency") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 6 Aug 2025 01:41:21 +0000 (04:41 +0300)]
Merge tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Pull perf fixes from Thomas Gleixner:
"Perf fixes for perf_mmap() reference counting to prevent potential
reference count leaks which are caused by:
- VMA splits, which change the offset or size of a mapping, which
causes perf_mmap_close() to ignore the unmap or unmap the wrong
buffer.
- Several internal issues of perf_mmap(), which can cause reference
count leaks in the perf mmap, corrupt accounting or cause leaks in
perf drivers.
The main fix is to prevent VMA splits by implementing the
[may_]split() callback for vm operations.
The other issues are addressed by rearranging code, early returns on
failure and invocation of cleanups.
Also provide a selftest to validate the fixes.
The reference counting should be converted to refcount_t, but that
requires larger refactoring of the code and will be done once these
fixes are upstream"
* tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git:
selftests/perf_events: Add a mmap() correctness test
perf/core: Prevent VMA split of buffer mappings
perf/core: Handle buffer mapping fail correctly in perf_mmap()
perf/core: Exit early on perf_mmap() fail
perf/core: Don't leak AUX buffer refcount on allocation failure
perf/core: Preserve AUX buffer allocation failure result
Ammar Faizi [Wed, 6 Aug 2025 00:31:05 +0000 (07:31 +0700)]
net: usbnet: Fix the wrong netif_carrier_on() call
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
Masahiro Yamada [Mon, 4 Aug 2025 14:20:07 +0000 (23:20 +0900)]
MAINTAINERS: hand over Kbuild maintenance
I'm stepping down as the maintainer of Kbuild/Kconfig.
It was enjoyable to refactor and improve the kernel build system,
but due to personal reasons, I believe it's difficult for me to
continue in this role any further.
I discussed this off-list with Nathan and Nicolas, and they have
kindly agreed to take over the maintenance of Kbuild with Odd Fixes.
I'm grateful to them for stepping in.
As for Kconfig, there are currently no designated reviewers, so the
maintainer position will remain vacant for now. I hope someone will
step up to take on the role.
Michał Górny [Tue, 29 Jul 2025 13:24:55 +0000 (15:24 +0200)]
kheaders: make it possible to override TAR
Commit 86cdd2fdc4e3 ("kheaders: make headers archive reproducible")
introduced a number of options specific to GNU tar to the `tar`
invocation in `gen_kheaders.sh` script. This causes the script to fail
to work on systems where `tar` is not GNU tar. This can occur e.g.
on recent Gentoo Linux installations that support using bsdtar from
libarchive instead.
Add a `TAR` make variable to make it possible to override the tar
executable used, e.g. by specifying:
make TAR=gtar
Link: https://bugs.gentoo.org/884061 Reported-by: Sam James <sam@gentoo.org> Tested-by: Sam James <sam@gentoo.org> Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Michał Górny <mgorny@gentoo.org> Signed-off-by: Sam James <sam@gentoo.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Thomas Weißschuh [Mon, 28 Jul 2025 13:47:37 +0000 (15:47 +0200)]
kbuild: userprogs: use correct linker when mixing clang and GNU ld
The userprogs infrastructure does not expect clang being used with GNU ld
and in that case uses /usr/bin/ld for linking, not the configured $(LD).
This fallback is problematic as it will break when cross-compiling.
Mixing clang and GNU ld is used for example when building for SPARC64,
as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst.
Relax the check around --ld-path so it gets used for all linkers.
Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
strcpy() does not perform bounds checking and can lead to buffer overflows
if the source string exceeds the destination buffer size. In
print_autowrap(), replace strcpy() with snprintf() to safely copy the
prompt string into the fixed-size tempstr buffer.
Meghana Malladi [Sun, 3 Aug 2025 18:02:16 +0000 (23:32 +0530)]
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
emac_rx_packet() is a common function for handling traffic
for both xdp and non-xdp use cases. Use common logic for
handling skb with or without xdp to prevent any incorrect
packet processing. This patch fixes ping working with
XDP_PASS for icssg driver.
net: Update threaded state in napi config in netif_set_threaded
Commit 2677010e7793 ("Add support to set NAPI threaded for individual
NAPI") added support to enable/disable threaded napi using netlink. This
also extended the napi config save/restore functionality to set the napi
threaded state. This breaks netdev reset for drivers that use napi
threaded at device level and also use napi config save/restore on
napi_disable/napi_enable. Basically on netdev with napi threaded enabled
at device level, a napi_enable call will get stuck trying to stop the
napi kthread. This is because the napi->config->threaded is set to
disabled when threaded is enabled at device level.
The issue can be reproduced on virtio-net device using qemu. To
reproduce the issue run following,
Update the threaded state in napi config in netif_set_threaded and add a
new test that verifies this scenario.
Tested on qemu with virtio-net:
NETIF=eth0 ./tools/testing/selftests/drivers/net/napi_threaded.py
TAP version 13
1..2
ok 1 napi_threaded.change_num_queues
ok 2 napi_threaded.enable_dev_threaded_disable_napi_threaded
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
NFS/localio: nfs_uuid_put() fix races with nfs_open/close_local_fh()
In order for the wait in nfs_uuid_put() to be safe, it is necessary to
ensure that nfs_uuid_add_file() doesn't add a new entry once the
nfs_uuid->net has been NULLed out.
Also fix up the wake_up_var_locked() / wait_var_event_spinlock() to both
use the nfs_uuid address, since nfl, and &nfl->uuid could be used elsewhere.
Ido Schimmel [Mon, 4 Aug 2025 11:43:20 +0000 (14:43 +0300)]
selftests: netdevsim: Xfail nexthop test on slow machines
A lot of test cases in the file are related to the idle and unbalanced
timers of resilient nexthop groups and these tests are reported to be
flaky on slow machines running debug kernels.
Rather than marking a lot of individual tests with xfail_on_slow(),
simply mark all the tests. Note that the test is stable on non-debug
machines and that with debug kernels we are mainly interested in the
output of various sanitizers in order to determine pass / fail.
Before:
# make -C tools/testing/selftests KSFT_MACHINE_SLOW=yes \
TARGETS=drivers/net/netdevsim TEST_PROGS=nexthop.sh \
TEST_GEN_PROGS="" run_tests
[...]
# TEST: Bucket migration after idle timer (with delete) [FAIL]
# Group expected to still be unbalanced
[...]
not ok 1 selftests: drivers/net/netdevsim: nexthop.sh # exit=1
After:
# make -C tools/testing/selftests KSFT_MACHINE_SLOW=yes \
TARGETS=drivers/net/netdevsim TEST_PROGS=nexthop.sh \
TEST_GEN_PROGS="" run_tests
[...]
# TEST: Bucket migration after idle timer (with delete) [XFAIL]
# Group expected to still be unbalanced
[...]
ok 1 selftests: drivers/net/netdevsim: nexthop.sh
Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20250729160609.02e0f157@kernel.org/ Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250804114320.193203-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 5 Aug 2025 23:01:47 +0000 (16:01 -0700)]
Merge branch 'eth-fbnic-fix-drop-stats-support'
Mohsin Bashir says:
====================
eth: fbnic: Fix drop stats support
Fix hardware drop stats support on the TX path of fbnic by addressing two
issues: ensure that tx_dropped stats are correctly copied to the
rtnl_link_stats64 struct, and protect the copying of drop stats from
fdb->hw_stats to the local variable with the hw_stats_lock to
ensure consistency.
====================
Mohsin Bashir [Sat, 2 Aug 2025 02:46:36 +0000 (19:46 -0700)]
eth: fbnic: Lock the tx_dropped update
Wrap copying of drop stats on TX path from fbd->hw_stats by the
hw_stats_lock. Currently, it is being performed outside the lock and
another thread accessing fbd->hw_stats can lead to inconsistencies.
Fixes: 5f8bd2ce8269 ("eth: fbnic: add support for TMI stats") Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250802024636.679317-3-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 1 Aug 2025 17:07:54 +0000 (10:07 -0700)]
eth: fbnic: remove the debugging trick of super high page bias
Alex added page bias of LONG_MAX, which is admittedly quite
a clever way of catching overflows of the pp ref count.
The page pool code was "optimized" to leave the ref at 1
for freed pages so it can't catch basic bugs by itself any more.
(Something we should probably address under DEBUG_NET...)
Unfortunately for fbnic since commit f7dc3248dcfb ("skbuff: Optimization
of SKB coalescing for page pool") core _may_ actually take two extra
pp refcounts, if one of them is returned before driver gives up the bias
the ret < 0 check in page_pool_unref_netmem() will trigger.
While at it add a FBNIC_ to the name of the driver constant.
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Keith Busch [Tue, 15 Jul 2025 18:46:22 +0000 (11:46 -0700)]
vfio/type1: conditional rescheduling while pinning
A large DMA mapping request can loop through dma address pinning for
many pages. In cases where THP can not be used, the repeated vmf_insert_pfn can
be costly, so let the task reschedule as need to prevent CPU stalls. Failure to
do so has potential harmful side effects, like increased memory pressure
as unrelated rcu tasks are unable to make their reclaim callbacks and
result in OOM conditions.
vfio/qat: add support for intel QAT 6xxx virtual functions
Extend the qat_vfio_pci variant driver to support QAT 6xxx Virtual
Functions (VFs). Add the relevant QAT 6xxx VF device IDs to the driver's
probe table, enabling proper detection and initialization of these devices.
Update the module description to reflect that the driver now supports all
QAT generations.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com> Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Link: https://lore.kernel.org/r/20250715081150.1244466-1-suman.kumar.chakraborty@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Jason Gunthorpe [Mon, 14 Jul 2025 16:08:25 +0000 (13:08 -0300)]
vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD
This was missed during the initial implementation. The VFIO PCI encodes
the vf_token inside the device name when opening the device from the group
FD, something like:
This is used to control access to a VF unless there is co-ordination with
the owner of the PF.
Since we no longer have a device name in the cdev path, pass the token
directly through VFIO_DEVICE_BIND_IOMMUFD using an optional field
indicated by VFIO_DEVICE_BIND_FLAG_TOKEN.
Fixes: 5fcc26969a16 ("vfio: Add VFIO_DEVICE_BIND_IOMMUFD") Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/0-v3-bdd8716e85fe+3978a-vfio_token_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Marcos Alano [Tue, 5 Aug 2025 20:44:29 +0000 (13:44 -0700)]
Input: add keycode for performance mode key
Alienware calls this key "Performance Boost". Dell calls it "G-Mode".
The goal is to have a specific keycode to detect when this key is
pressed, so userspace can act upon it and do what have to do, usually
starting the power profile for performance.
Lorenzo Stoakes [Sat, 2 Aug 2025 20:55:35 +0000 (22:55 +0200)]
selftests/perf_events: Add a mmap() correctness test
Exercise various mmap(), munmap() and mremap() invocations, which might
cause a perf buffer mapping to be split or truncated.
To avoid hard coding the perf event and having dependencies on
architectures and configuration options, scan through event types in sysfs
and try to open them. On success, try to mmap() and if that succeeds try to
mmap() the AUX buffer.
In case that no AUX buffer supporting event is found, only test the base
buffer mapping. If no mappable event is found or permissions are not
sufficient, skip the tests.
Reserve a PROT_NONE region for both rb and aux tests to allow testing the
case where mremap unmaps beyond the end of a mapped VMA to prevent it from
unmapping unrelated mappings.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Co-developed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Thomas Gleixner [Wed, 30 Jul 2025 21:01:21 +0000 (23:01 +0200)]
perf/core: Prevent VMA split of buffer mappings
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org
Thomas Gleixner [Sat, 2 Aug 2025 10:48:55 +0000 (12:48 +0200)]
perf/core: Handle buffer mapping fail correctly in perf_mmap()
After successful allocation of a buffer or a successful attachment to an
existing buffer perf_mmap() tries to map the buffer read only into the page
table. If that fails, the already set up page table entries are zapped, but
the other perf specific side effects of that failure are not handled. The
calling code just cleans up the VMA and does not invoke perf_mmap_close().
This leaks reference counts, corrupts user->vm accounting and also results
in an unbalanced invocation of event::event_mapped().
Cure this by moving the event::event_mapped() invocation before the
map_range() call so that on map_range() failure perf_mmap_close() can be
invoked without causing an unbalanced event::event_unmapped() call.
perf_mmap_close() undoes the reference counts and eventually frees buffers.
Fixes: b709eb872e19 ("perf: map pages in advance") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
Thomas Gleixner [Sat, 2 Aug 2025 10:49:48 +0000 (12:49 +0200)]
perf/core: Exit early on perf_mmap() fail
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec679c ("perf: Add pmu callbacks to track event mapping and unmapping") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
Thomas Gleixner [Sat, 2 Aug 2025 10:39:39 +0000 (12:39 +0200)]
perf/core: Don't leak AUX buffer refcount on allocation failure
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
Thomas Gleixner [Mon, 4 Aug 2025 20:22:09 +0000 (22:22 +0200)]
perf/core: Preserve AUX buffer allocation failure result
A recent overhaul sets the return value to 0 unconditionally after the
allocations, which causes reference count leaks and corrupts the user->vm
accounting.
Preserve the AUX buffer allocation failure return value, so that the
subsequent code works correctly.
Fixes: 0983593f32c4 ("perf/core: Lift event->mmap_mutex in perf_mmap()") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
Wang Zhaolong [Mon, 4 Aug 2025 13:40:05 +0000 (21:40 +0800)]
smb: client: smb: client: eliminate mid_flags field
This is step 3/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
Replace the mid_flags bitmask with dedicated boolean fields to
simplify locking logic and improve code readability:
- Replace MID_DELETED with bool deleted_from_q
- Replace MID_WAIT_CANCELLED with bool wait_cancelled
- Remove mid_flags field entirely
The new boolean fields have clearer semantics:
- deleted_from_q: whether mid has been removed from pending_mid_q
- wait_cancelled: whether request was cancelled during wait
This change reduces memory usage (from 4-byte bitmask to 2 boolean
flags) and eliminates confusion about which lock protects which
flag bits, preparing for per-mid locking in the next patch.
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Acked-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
Wang Zhaolong [Mon, 4 Aug 2025 13:40:04 +0000 (21:40 +0800)]
smb: client: add mid_counter_lock to protect the mid counter counter
This is step 2/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
Add a dedicated mid_counter_lock to protect current_mid counter,
separating it from mid_queue_lock which protects pending_mid_q
operations. This reduces lock contention and prepares for finer-
grained locking in subsequent patches.
Changes:
- Add TCP_Server_Info->mid_counter_lock spinlock
- Rename CurrentMid to current_mid for consistency
- Use mid_counter_lock to protect current_mid access
- Update locking documentation in cifsglob.h
This separation allows mid allocation to proceed without blocking
queue operations, improving performance under heavy load.
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Acked-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
Wang Zhaolong [Mon, 4 Aug 2025 13:40:03 +0000 (21:40 +0800)]
smb: client: rename server mid_lock to mid_queue_lock
This is step 1/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
The current mid_lock name is somewhat ambiguous about what it protects.
To prepare for splitting this lock into separate, more granular locks,
this patch renames mid_lock to mid_queue_lock to clearly indicate its
specific responsibility for protecting the pending_mid_q list and
related queue operations.
No functional changes are made in this patch - it only prepares the
codebase for the lock splitting that follows.
- mid_queue_lock for queue operations
- mid_counter_lock for mid counter operations
- per-mid locks for individual mid state management
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Acked-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
Pedro Falcato [Tue, 29 Jul 2025 12:03:48 +0000 (13:03 +0100)]
RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages
Ever since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"),
we have been doing this:
static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset,
size_t size)
[...]
/* Calculate the number of bytes we need to push, for this page
* specifically */
size_t bytes = min_t(size_t, PAGE_SIZE - offset, size);
/* If we can't splice it, then copy it in, as normal */
if (!sendpage_ok(page[i]))
msg.msg_flags &= ~MSG_SPLICE_PAGES;
/* Set the bvec pointing to the page, with len $bytes */
bvec_set_page(&bvec, page[i], bytes, offset);
/* Set the iter to $size, aka the size of the whole sendpages (!!!) */
iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size);
try_page_again:
lock_sock(sk);
/* Sendmsg with $size size (!!!) */
rv = tcp_sendmsg_locked(sk, &msg, size);
This means we've been sending oversized iov_iters and tcp_sendmsg calls
for a while. This has a been a benign bug because sendpage_ok() always
returned true. With the recent slab allocator changes being slowly
introduced into next (that disallow sendpage on large kmalloc
allocations), we have recently hit out-of-bounds crashes, due to slight
differences in iov_iter behavior between the MSG_SPLICE_PAGES and
"regular" copy paths:
(MSG_SPLICE_PAGES)
skb_splice_from_iter
iov_iter_extract_pages
iov_iter_extract_bvec_pages
uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere
skb_splice_from_iter gets a "short" read
(!MSG_SPLICE_PAGES)
skb_copy_to_page_nocache copy=iov_iter_count
[...]
copy_from_iter
/* this doesn't help */
if (unlikely(iter->count < len))
len = iter->count;
iterate_bvec
... and we run off the bvecs
Fix this by properly setting the iov_iter's byte count, plus sending the
correct byte count to tcp_sendmsg_locked.
Link: https://patch.msgid.link/r/20250729120348.495568-1-pfalcato@suse.de Cc: stable@vger.kernel.org Fixes: c2ff29e99a76 ("siw: Inline do_tcp_sendpages()") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202507220801.50a7210-lkp@intel.com Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Pedro Falcato <pfalcato@suse.de> Acked-by: Bernard Metzler <bernard.metzler@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linus Torvalds [Tue, 5 Aug 2025 13:55:03 +0000 (16:55 +0300)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM update from Russell King:
"Just one development update this time:
- Finish removing Coresight support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9449/1: coresight: Finish removal of Coresight support in arch/arm/kernel
Linus Torvalds [Tue, 5 Aug 2025 13:37:05 +0000 (16:37 +0300)]
Merge tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Use generic_write_sync instead of vfs_fsync_range in exfat_file_write_iter.
It will fix an issue where fdatasync would be set incorrectly.
- Fix potential infinite loop by the self-linked chain.
* tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add cluster chain loop check for dir
exfat: fdatasync flag should be same like generic_write_sync()
Linus Torvalds [Tue, 5 Aug 2025 13:02:07 +0000 (16:02 +0300)]
Merge tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
s390/mm: Allocate page table with PAGE_SIZE granularity
Make vmem_pte_alloc() consistent by always allocating page table of
PAGE_SIZE granularity, regardless of whether page_table_alloc() (with
slab) or memblock_alloc() is used. This ensures page table can be fully
freed when the corresponding page table entries are removed.
Fixes: d08d4e7cd6bf ("s390/mm: use full 4KB page for 2KB PTE") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO") 691efbedc60d ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO") 2ff906994b6c ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO") 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Tiezhu Yang [Tue, 5 Aug 2025 11:00:22 +0000 (19:00 +0800)]
LoongArch: BPF: Set bpf_jit_bypass_spec_v1/v4()
JITs can set bpf_jit_bypass_spec_v1/v4() if they want the verifier to
skip analysis/patching for the respective vulnerability, it is safe to
set both bpf_jit_bypass_spec_v1/v4(), because there is no speculation
barrier instruction for LoongArch.
Suggested-by: Luis Gerhorst <luis.gerhorst@fau.de> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Haoran Jiang [Tue, 5 Aug 2025 11:00:22 +0000 (19:00 +0800)]
LoongArch: BPF: Fix the tailcall hierarchy
In specific use cases combining tailcalls and BPF-to-BPF calls，
MAX_TAIL_CALL_CNT won't work because of missing tail_call_cnt
back-propagation from callee to caller. This patch fixes this
tailcall issue caused by abusing the tailcall in bpf2bpf feature
on LoongArch like the way of "bpf, x64: Fix tailcall hierarchy".
Push tail_call_cnt_ptr and tail_call_cnt into the stack,
tail_call_cnt_ptr is passed between tailcall and bpf2bpf,
uses tail_call_cnt_ptr to increment tail_call_cnt.
Haoran Jiang [Tue, 5 Aug 2025 11:00:22 +0000 (19:00 +0800)]
LoongArch: BPF: Fix jump offset calculation in tailcall
The extra pass of bpf_int_jit_compile() skips JIT context initialization
which essentially skips offset calculation leaving out_offset = -1, so
the jmp_offset in emit_bpf_tail_call is calculated by
"#define jmp_offset (out_offset - (cur_offset))"
is a negative number, which is wrong. The final generated assembly are
as follow.
Chenghao Duan [Tue, 5 Aug 2025 11:00:18 +0000 (19:00 +0800)]
LoongArch: BPF: Add basic bpf trampoline support
BPF trampoline is the critical infrastructure of the BPF subsystem,
acting as a mediator between kernel functions and BPF programs. Numerous
important features, such as using BPF program for zero overhead kernel
introspection, rely on this key component.
The related tests have passed, including the following technical points:
1. fentry
2. fmod_ret
3. fexit
The following related testcases passed on LoongArch:
sudo ./test_progs -a fentry_test/fentry
sudo ./test_progs -a fexit_test/fexit
sudo ./test_progs -a fentry_fexit
sudo ./test_progs -a modify_return
sudo ./test_progs -a fexit_sleep
sudo ./test_progs -a test_overhead
sudo ./test_progs -a trampoline_count
This issue was first reported by Geliang Tang in June 2024 while
debugging MPTCP BPF selftests on a LoongArch machine (see commit eef0532e900c "selftests/bpf: Null checks for links in bpf_tcp_ca").
Geliang, Huacai, and Tiezhu then worked together to drive the
implementation of this feature, encouraging broader collaboration among
Chinese kernel engineers.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507100034.wXofj6VX-lkp@intel.com/ Reported-by: Geliang Tang <geliang@kernel.org> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Tested-by: Vincent Li <vincent.mc.li@gmail.com> Co-developed-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Chenghao Duan [Tue, 5 Aug 2025 11:00:18 +0000 (19:00 +0800)]
LoongArch: BPF: Add dynamic code modification support
This commit adds support for BPF dynamic code modification on the
LoongArch architecture:
1. Add bpf_arch_text_copy() for instruction block copying.
2. Add bpf_arch_text_poke() for runtime instruction patching.
3. Add bpf_arch_text_invalidate() for code invalidation.
On LoongArch, since symbol addresses in the direct mapping region can't
be reached via relative jump instructions from the paged mapping region,
we use the move_imm+jirl instruction pair as absolute jump instructions.
These require 2-5 instructions, so we reserve 5 NOP instructions in the
program as placeholders for function jumps.
The larch_insn_text_copy() function is solely used for BPF. And the use
of larch_insn_text_copy() requires PAGE_SIZE alignment. Currently, only
the size of the BPF trampoline is page-aligned.
Co-developed-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Jason Wang [Tue, 29 Jul 2025 07:39:16 +0000 (15:39 +0800)]
vhost: initialize vq->nheads properly
Commit 7918bb2d19c9 ("vhost: basic in order support") introduces
vq->nheads to store the number of batched used buffers per used elem
but it forgets to initialize the vq->nheads to NULL in
vhost_dev_init() this will cause kfree() that would try to free it
without be allocated if SET_OWNER is not called.
Reported-by: JAEHOON KIM <jhkim@linux.ibm.com> Reported-by: Breno Leitao <leitao@debian.org> Fixes: 45347e79b544 ("vhost: basic in order support") Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250729073916.80647-1-jasowang@redhat.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Breno Leitao <leitao@debian.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Jaehoon Kim <jhkim@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 0-day bot reported that on the failure path the driver iounmap()s IWB
resources that are managed through devm_ioremap(), which is clearly wrong
because the driver would end up unmapping the MMIO resource twice on
probing failure.
Fix this by removing the error path altogether and by letting devres manage
the iounmapping on clean-up.
Fixes: 695949d8b16f ("irqchip/gic-v5: Add GICv5 IWB support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/all/20250801-gic-v5-fixes-6-17-v1-1-4fcedaccf9e6@kernel.org Closes: https://lore.kernel.org/oe-kbuild-all/202508010038.N3r4ZmII-lkp@intel.com
Elad Nachman [Sun, 3 Aug 2025 10:25:48 +0000 (13:25 +0300)]
irqchip/mvebu-gicp: Clear pending interrupts on init
When a kexec'ed kernel boots up, there might be stale unhandled interrupts
pending in the interrupt controller. These are delivered as spurious
interrupts once the boot CPU enables interrupts.
Clear all pending interrupts when the driver is initialized to prevent
these spurious interrupts from locking the CPU in an endless loop.
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
Commit 8b65db1e93a2 ("irqchip/msi-lib: Add IRQ_DOMAIN_FLAG_FWNODE_PARENT
handling") added logic in msi_lib_irq_domain_select() to match the domain
fwnode against the fwnode parent of the fwspec.fwnode.
The fwnode_get_parent() caller must call fwnode_handle_put() on the
returned pointer value, lest fwnode refcounting for the parent ends up
being out of kilter.
Fix this by relying on the fwnode_handle clean-up handlers and by
incrementing the fwnode refcount regardless of whether parent matching is
used or not (the domain selection code already holds a reference before
calling msi_lib_irq_domain_select() but to make the exit path more uniform
if IRQ_DOMAIN_FLAG_FWNODE_PARENT is not set fwnode_handle_get() is called
again on fwspec.fwnode so that the clean-up code is the same for the two
matching patterns).
Thomas Gleixner [Sat, 2 Aug 2025 10:59:13 +0000 (12:59 +0200)]
irqchip/riscv-imsic: Don't dereference before NULL pointer check
smatch warns about a dereference before check:
drivers/irqchip/irq-riscv-imsic-platform.c:317 imsic_irqdomain_init() warn: variable dereferenced before check 'imsic' (see line 311)
Cure it by moving the firmware not assignement after the checks.
Fixes: 59422904dd98 ("irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Closes: https://lore.kernel.org/r/202507311953.NFVZkr0a-lkp@intel.com/ ---
drivers/irqchip/irq-riscv-imsic-platform.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Paulo Alcantara [Thu, 31 Jul 2025 23:46:43 +0000 (20:46 -0300)]
smb: client: fix creating symlinks under POSIX mounts
SMB3.1.1 POSIX mounts support native symlinks that are created with
IO_REPARSE_TAG_SYMLINK reparse points, so skip the checking of
FILE_SUPPORTS_REPARSE_POINTS as some servers might not have it set.
Cc: linux-cifs@vger.kernel.org Cc: Ralph Boehme <slow@samba.org> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Reported-by: Matthew Richardson <m.richardson@ed.ac.uk> Closes: https://marc.info/?i=1124e7cd-6a46-40a6-9f44-b7664a66654b@ed.ac.uk Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Thu, 31 Jul 2025 23:46:42 +0000 (20:46 -0300)]
smb: client: default to nonativesocket under POSIX mounts
SMB3.1.1 POSIX mounts require sockets to be created with NFS reparse
points.
Cc: linux-cifs@vger.kernel.org Cc: Ralph Boehme <slow@samba.org> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Reported-by: Matthew Richardson <m.richardson@ed.ac.uk> Closes: https://marc.info/?i=1124e7cd-6a46-40a6-9f44-b7664a66654b@ed.ac.uk Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Steve French <stfrench@microsoft.com>
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
When making ZL3073X invisible, it was overlooked that ZL3073X depends on
NET, while ZL3073X_I2C and ZL3073X_SPI do not, causing:
WARNING: unmet direct dependencies detected for ZL3073X when selected by ZL3073X_I2C
WARNING: unmet direct dependencies detected for ZL3073X when selected by ZL3073X_SPI
WARNING: unmet direct dependencies detected for ZL3073X
Depends on [n]: NET [=n]
Selected by [y]:
- ZL3073X_I2C [=y] && I2C [=y]
Selected by [y]:
- ZL3073X_SPI [=y] && SPI [=y]
Fix this by adding the missing dependencies to ZL3073X_I2C and
ZL3073X_SPI.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202508022110.nTqZ5Ylu-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202508022351.NHIxPF8j-lkp@intel.com/ Fixes: a4f0866e3dbbf3fe ("dpll: Make ZL3073X invisible") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20250802155302.3673457-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maher Azzouzi [Sat, 2 Aug 2025 00:18:57 +0000 (17:18 -0700)]
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
TCA_MQPRIO_TC_ENTRY_INDEX is validated using
NLA_POLICY_MAX(NLA_U32, TC_QOPT_MAX_QUEUE), which allows the value
TC_QOPT_MAX_QUEUE (16). This leads to a 4-byte out-of-bounds stack
write in the fp[] array, which only has room for 16 elements (0–15).
Fix this by changing the policy to allow only up to TC_QOPT_MAX_QUEUE - 1.
Fixes: f62af20bed2d ("net/sched: mqprio: allow per-TC user input of FP adminStatus") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Maher Azzouzi <maherazz04@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250802001857.2702497-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using devm_*() [here] is completely wrong, because this is called
from mdiobus_register_device(). This is not the probe function
for the device, and thus there is no code to trigger the release of
the resource on unregistration.
Moreover, when the mdiodev is eventually probed, if the driver fails
or the driver is unbound, the GPIO will be released, but a reference
will be left behind.
Using devm* with a struct device that is *not* currently being probed
is fundamentally wrong - an abuse of devm.
Jakub Kicinski [Fri, 1 Aug 2025 18:16:38 +0000 (11:16 -0700)]
selftests: net: packetdrill: xfail all problems on slow machines
We keep seeing flakes on packetdrill on debug kernels, while
non-debug kernels are stable, not a single flake in 200 runs.
Time to give up, debug kernels appear to suffer from 10msec
latency spikes and any timing-sensitive test is bound to flake.
Quang Le [Fri, 1 Aug 2025 17:54:16 +0000 (13:54 -0400)]
net/packet: fix a race in packet_set_ring() and packet_notifier()
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076edea7
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history.
be_cmd_set_mac_list() calls dma_free_coherent() under a spin_lock_bh.
Fix it by freeing only after the lock has been released.
Fixes: 1a82d19ca2d6 ("be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250801101338.72502-1-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / thirdparty / linux.git / log
