s3:smbd multichannel: always allow multichannel to the ip of the queried connection
We can announce the ip of the current connection even if it's
a moveable cluster address... as the client is already connected to it.
This change means in a typical ctdb cluster, where we only have public
addresses, the client can at least have more than one multichannel'ed
connection to the public ip.
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Günther Deschner <gd@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Mon Jan 8 16:58:26 UTC 2024 on atb-devel-224
Ralph Boehme [Wed, 20 Dec 2023 14:09:59 +0000 (15:09 +0100)]
smbd: check for previous versions in check_any_access_fsp()
Now that check_any_access_fsp() is broadly used consistently to
restrict access for all modifying operations, we can add a check for
previous versions to check_any_access_fsp() and it gets enforced
consistently.
Ralph Boehme [Wed, 20 Dec 2023 17:32:25 +0000 (18:32 +0100)]
smbd: replace CHECK_WRITE() macro with calls to check_any_access_fsp()
The additional check if fd underlying fd is valid and not -1 should not be done
at this place. I actually would prefer an write to fail with EBADF if this
happens, as it's likely easier to debug why this happened. These days we should
always have a valid fd.
Ralph Boehme [Thu, 21 Dec 2023 09:58:09 +0000 (10:58 +0100)]
smbd: fix check_any_access_fsp() for non-fsa fsps
smbd_check_access_rights_fsp() requires *all* rights in access_mask to
be granted by the underlying ACL, but the semantics of this function
is supposed to grant access if any one of the rights in
access_requested is allowed.
Fix this by looping over the requested access mask. If
smbd_check_access_rights_fsp() returns sucess, mask will be non-null
and when assigned to access_granted, the subsequent check will pass,
fail otherwise.
I'm not doing an early exit on purpose because a subsequent commit
adds additional security checks that are done in the subsequent code
path common for fsa and non-fsa fsps.
Ralph Boehme [Thu, 21 Dec 2023 09:58:09 +0000 (10:58 +0100)]
smbd: rename check_access_fsp() to check_any_access_fsp()
The semantics of the access check in check_access_fsp() itself is to
allow access if *at least* one or more rights of the rights in
access_mask are allowed. The name check_any_access_fsp() better
reflects this.
Ralph Boehme [Thu, 21 Dec 2023 15:27:42 +0000 (16:27 +0100)]
smbd: set fsp_flags.is_fsa to true on printer file handles
Printer file handles went through SMB_VFS_CREATE_FILE() and are network
callable, so it makes sense to set this on them.
This ensures that check_access_fsp() doesn't take the codepath calling
smbd_check_access_rights_fsp(), but just checks the request rights from
fsp->access_mask.
Ralph Boehme [Thu, 21 Dec 2023 18:40:21 +0000 (19:40 +0100)]
selftest: remove error_inject from shadow_write share
Frankly, I can't remember why I added this as part of bug 13688. The
goal of the corresponding test is to verify a write on a read-only
file handle fails. As the file is opened O_RDONLY, the write will fail
anyway and there's no need to inject the error.
To make things worse, having the error injected meant we didn't notice
when the underlying logic of forcing the open to be done with O_RDONLY
was done as O_RDWR, resulting in the write on the handle to succeed.
This happened when we introduced reopen_from_fsp(): the initial
pathref open of a path with a twrp value was correctly detected and
handled by shadow_copy2_openat(). However, when converting the pathref
open to a real one via reopen_from_fsp(), shadow_copy2_openat() only
sees the magic /proc/fd path and has no way of inferring that this was
originating from a prevous version open with a twrp value.
Tl;dr: we can just remove this error injection, it is not needed, the
correct fix is to implement this in the SMB layer which is done in the
subsequent commits.
Shachar Sharon [Mon, 13 Nov 2023 13:47:24 +0000 (15:47 +0200)]
vfs_ceph: use extra 'ceph_*at()' calls when available
As of libcephfs version-10.0.3 the high-level API has few more '*at()'
calls. Prefer those newer hooks over path-based when having an
appropriate directory fd (namely: ceph_mkdirat, ceph_openat,
cepth_unlinkat, ceph_symlinkat, ceph_readlinkat).
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Björn Jacke <bjacke@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Jan 4 12:45:58 UTC 2024 on atb-devel-224
wscript: use opt.PRIVATE_EXTENSION_DEFAULT('private-samba')
The problem was that we used opt.PRIVATE_EXTENSION_DEFAULT('samba4') and
libndr as private will become libndr-samba4 and that already exists as
libndr-samba4 as we don't append the extension if it's already there.
So meant with --private-libraries=ALL we hit the following problem:
Jones Syue [Thu, 4 Jan 2024 01:42:15 +0000 (09:42 +0800)]
s3:smbd multichannel: always refresh the network information
To maintain SMB Multichannel, windows client might periodically query with
FSCTL_QUERY_NETWORK_INTERFACE_INFO to get SMB server's network information,
in my case windows server 2022 would do this every 10 minutes (600 seconds).
Consider a scenario: the network information might have changed between
these queries, some become link down, new interface is link up, network
speed is changed, and etc. So far smbd might not aware of these changes and
still report out-of-date network information to windows client, until we
manually send a SIGHUP to smbd in order to trigger load_interfaces():
smbd_sig_hup_handler() > reload_services () > load_interfaces()
This might be a bit inconvenient because it is hard to decide when should
we manually send a SIGHUP to smbd for refreshing network information.
This patch adds load_interfaces() at fsctl_network_iface_info(), while smbd
received FSCTL_QUERY_NETWORK_INTERFACE_INFO would go through this and refresh
local_interfaces, then respond to client with up-to-date network information;
also refresh num_ifaces to make sure interfaces count is consistent.
s3:utils: Fix the auth function to print correct values to the user
In order to show correct values in the password prompt displayed by
cli_credentials_get_password*(). We need to set the domain and username
in the credentials system.
The credentials supplied via the SMB URL have a higher priority than the
command line options.
s3:utils: Handle the domain before username and password
The cli_credentials_get_password*() function will interactively ask the
user for a password if none has been supplied via another ways. To show
the correct domain and username in the prompt, we need handle domain
and user first.
Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Jan 2 20:37:01 UTC 2024 on atb-devel-224
Björn Jacke [Mon, 25 Dec 2023 20:48:35 +0000 (21:48 +0100)]
s4/ldap_backend: do_call: use modern DBG macros
Signed-off-by: Bjoern Jacke <bjacke@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Dec 29 13:50:05 UTC 2023 on atb-devel-224
Joseph Sutton [Thu, 21 Dec 2023 22:04:51 +0000 (11:04 +1300)]
lib:crypto: Add tests for GKDI key derivation
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Dec 22 06:31:29 UTC 2023 on atb-devel-224
Douglas Bagnall [Wed, 20 Dec 2023 01:26:00 +0000 (14:26 +1300)]
fuzz: allow max size conditional ACE round-trip failure
The encoder, being cautious not to overstep the arbitrary 10000 byte
boundary, might not encode an exactly 10000 byte condition. This
is an off-by-one, but in the safe direction.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Dec 22 00:51:13 UTC 2023 on atb-devel-224
Joseph Sutton [Wed, 20 Dec 2023 22:51:19 +0000 (11:51 +1300)]
librpc: Change type of ‘u16string’ from ‘const uint16_t *’ to ‘const unsigned char *’
A u16string is supposed to contain UTF‐16 code units, but
ndr_pull_u16string() and ndr_push_u16string() fail to correctly ensure
this on big‐endian systems. Code that relies on the u16string array
containing correct values will then fail.
Fix ndr_pull_u16string() and ndr_push_u16string() to work on big‐endian
systems, ensuring that other code can use these strings without having
to worry about first encoding them to little‐endian.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Joseph Sutton [Fri, 8 Dec 2023 03:38:21 +0000 (16:38 +1300)]
tests/krb5: Add Python implementation and tests for Group Key Distribution Service
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Dec 21 21:19:30 UTC 2023 on atb-devel-224
Joseph Sutton [Fri, 8 Dec 2023 02:58:32 +0000 (15:58 +1300)]
s4:libcli: Fix conversion from HRESULT and WERROR to Python objects
The inner values of HRESULT and WERROR are 32‐bit unsigned integers,
which might not be representable in type ‘int’. We must then use the ‘k’
format specifier, which corresponds to ‘unsigned long’, a type
guaranteed to be at least 32 bits in size.
If we’re just passing a parameter to another macro which we know
correctly parenthesizes its arguments, then we don’t need to
parenthesize the parameter ourselves.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
If we’re just passing a parameter to another macro which we know
correctly parenthesizes its arguments, then we don’t need to
parenthesize the parameter ourselves.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
projects / thirdparty / samba.git / log
