+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * elanfreq: cpufreq driver for the AMD ELAN family
- *
- * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * Parts of this code are (c) Sven Geggus <sven@geggus.net>
- *
- * All Rights Reserved.
- *
- * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/delay.h>
-#include <linux/cpufreq.h>
-
-#include <asm/cpu_device_id.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-
-#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
-#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
-
-/* Module parameter */
-static int max_freq;
-
-struct s_elan_multiplier {
- int clock; /* frequency in kHz */
- int val40h; /* PMU Force Mode register */
- int val80h; /* CPU Clock Speed Register */
-};
-
-/*
- * It is important that the frequencies
- * are listed in ascending order here!
- */
-static struct s_elan_multiplier elan_multiplier[] = {
- {1000, 0x02, 0x18},
- {2000, 0x02, 0x10},
- {4000, 0x02, 0x08},
- {8000, 0x00, 0x00},
- {16000, 0x00, 0x02},
- {33000, 0x00, 0x04},
- {66000, 0x01, 0x04},
- {99000, 0x01, 0x05}
-};
-
-static struct cpufreq_frequency_table elanfreq_table[] = {
- {0, 0, 1000},
- {0, 1, 2000},
- {0, 2, 4000},
- {0, 3, 8000},
- {0, 4, 16000},
- {0, 5, 33000},
- {0, 6, 66000},
- {0, 7, 99000},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-
-/**
- * elanfreq_get_cpu_frequency: determine current cpu speed
- *
- * Finds out at which frequency the CPU of the Elan SOC runs
- * at the moment. Frequencies from 1 to 33 MHz are generated
- * the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
- * and have the rest of the chip running with 33 MHz.
- */
-
-static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
-{
- u8 clockspeed_reg; /* Clock Speed Register */
-
- local_irq_disable();
- outb_p(0x80, REG_CSCIR);
- clockspeed_reg = inb_p(REG_CSCDR);
- local_irq_enable();
-
- if ((clockspeed_reg & 0xE0) == 0xE0)
- return 0;
-
- /* Are we in CPU clock multiplied mode (66/99 MHz)? */
- if ((clockspeed_reg & 0xE0) == 0xC0) {
- if ((clockspeed_reg & 0x01) == 0)
- return 66000;
- else
- return 99000;
- }
-
- /* 33 MHz is not 32 MHz... */
- if ((clockspeed_reg & 0xE0) == 0xA0)
- return 33000;
-
- return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
-}
-
-
-static int elanfreq_target(struct cpufreq_policy *policy,
- unsigned int state)
-{
- /*
- * Access to the Elan's internal registers is indexed via
- * 0x22: Chip Setup & Control Register Index Register (CSCI)
- * 0x23: Chip Setup & Control Register Data Register (CSCD)
- *
- */
-
- /*
- * 0x40 is the Power Management Unit's Force Mode Register.
- * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
- */
-
- local_irq_disable();
- outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */
- outb_p(0x00, REG_CSCDR);
- local_irq_enable(); /* wait till internal pipelines and */
- udelay(1000); /* buffers have cleaned up */
-
- local_irq_disable();
-
- /* now, set the CPU clock speed register (0x80) */
- outb_p(0x80, REG_CSCIR);
- outb_p(elan_multiplier[state].val80h, REG_CSCDR);
-
- /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
- outb_p(0x40, REG_CSCIR);
- outb_p(elan_multiplier[state].val40h, REG_CSCDR);
- udelay(10000);
- local_irq_enable();
-
- return 0;
-}
-/*
- * Module init and exit code
- */
-
-static int elanfreq_cpu_init(struct cpufreq_policy *policy)
-{
- struct cpuinfo_x86 *c = &cpu_data(0);
- struct cpufreq_frequency_table *pos;
-
- /* capability check */
- if ((c->x86_vendor != X86_VENDOR_AMD) ||
- (c->x86 != 4) || (c->x86_model != 10))
- return -ENODEV;
-
- /* max freq */
- if (!max_freq)
- max_freq = elanfreq_get_cpu_frequency(0);
-
- /* table init */
- cpufreq_for_each_entry(pos, elanfreq_table)
- if (pos->frequency > max_freq)
- pos->frequency = CPUFREQ_ENTRY_INVALID;
-
- policy->freq_table = elanfreq_table;
- return 0;
-}
-
-
-#ifndef MODULE
-/**
- * elanfreq_setup - elanfreq command line parameter parsing
- *
- * elanfreq command line parameter. Use:
- * elanfreq=66000
- * to set the maximum CPU frequency to 66 MHz. Note that in
- * case you do not give this boot parameter, the maximum
- * frequency will fall back to _current_ CPU frequency which
- * might be lower. If you build this as a module, use the
- * max_freq module parameter instead.
- */
-static int __init elanfreq_setup(char *str)
-{
- max_freq = simple_strtoul(str, &str, 0);
- pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
- return 1;
-}
-__setup("elanfreq=", elanfreq_setup);
-#endif
-
-
-static struct cpufreq_driver elanfreq_driver = {
- .get = elanfreq_get_cpu_frequency,
- .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = elanfreq_target,
- .init = elanfreq_cpu_init,
- .name = "elanfreq",
-};
-
-static const struct x86_cpu_id elan_id[] = {
- X86_MATCH_VENDOR_FAM_MODEL(AMD, 4, 10, NULL),
- {}
-};
-MODULE_DEVICE_TABLE(x86cpu, elan_id);
-
-static int __init elanfreq_init(void)
-{
- if (!x86_match_cpu(elan_id))
- return -ENODEV;
- return cpufreq_register_driver(&elanfreq_driver);
-}
-
-
-static void __exit elanfreq_exit(void)
-{
- cpufreq_unregister_driver(&elanfreq_driver);
-}
-
-
-module_param(max_freq, int, 0444);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
- "Sven Geggus <sven@geggus.net>");
-MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
-
-module_init(elanfreq_init);
-module_exit(elanfreq_exit);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * sc520_freq.c: cpufreq driver for the AMD Elan sc520
- *
- * Copyright (C) 2005 Sean Young <sean@mess.org>
- *
- * Based on elanfreq.c
- *
- * 2005-03-30: - initial revision
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/delay.h>
-#include <linux/cpufreq.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-
-#include <asm/cpu_device_id.h>
-
-#define MMCR_BASE 0xfffef000 /* The default base address */
-#define OFFS_CPUCTL 0x2 /* CPU Control Register */
-
-static __u8 __iomem *cpuctl;
-
-static struct cpufreq_frequency_table sc520_freq_table[] = {
- {0, 0x01, 100000},
- {0, 0x02, 133000},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
-{
- u8 clockspeed_reg = *cpuctl;
-
- switch (clockspeed_reg & 0x03) {
- default:
- pr_err("error: cpuctl register has unexpected value %02x\n",
- clockspeed_reg);
- fallthrough;
- case 0x01:
- return 100000;
- case 0x02:
- return 133000;
- }
-}
-
-static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state)
-{
-
- u8 clockspeed_reg;
-
- local_irq_disable();
-
- clockspeed_reg = *cpuctl & ~0x03;
- *cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data;
-
- local_irq_enable();
-
- return 0;
-}
-
-/*
- * Module init and exit code
- */
-
-static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
-{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- /* capability check */
- if (c->x86_vendor != X86_VENDOR_AMD ||
- c->x86 != 4 || c->x86_model != 9)
- return -ENODEV;
-
- /* cpuinfo and default policy values */
- policy->cpuinfo.transition_latency = 1000000; /* 1ms */
- policy->freq_table = sc520_freq_table;
-
- return 0;
-}
-
-
-static struct cpufreq_driver sc520_freq_driver = {
- .get = sc520_freq_get_cpu_frequency,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = sc520_freq_target,
- .init = sc520_freq_cpu_init,
- .name = "sc520_freq",
-};
-
-static const struct x86_cpu_id sc520_ids[] = {
- X86_MATCH_VENDOR_FAM_MODEL(AMD, 4, 9, NULL),
- {}
-};
-MODULE_DEVICE_TABLE(x86cpu, sc520_ids);
-
-static int __init sc520_freq_init(void)
-{
- int err;
-
- if (!x86_match_cpu(sc520_ids))
- return -ENODEV;
-
- cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
- if (!cpuctl) {
- pr_err("sc520_freq: error: failed to remap memory\n");
- return -ENOMEM;
- }
-
- err = cpufreq_register_driver(&sc520_freq_driver);
- if (err)
- iounmap(cpuctl);
-
- return err;
-}
-
-
-static void __exit sc520_freq_exit(void)
-{
- cpufreq_unregister_driver(&sc520_freq_driver);
- iounmap(cpuctl);
-}
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sean Young <sean@mess.org>");
-MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
-
-module_init(sc520_freq_init);
-module_exit(sc520_freq_exit);
-
projects / thirdparty / kernel / linux.git / commitdiff
