-%% TeX macros to handle Texinfo files.
-%% $Id: texinfo.tex,v 1.13 1997/07/11 15:27:19 meyering Exp $
+%% TeX macros to handle texinfo files
% Copyright (C) 1985, 86, 88, 90, 91, 92, 93,
-% 94, 95, 96, 97 Free Software Foundation, Inc.
+% 94, 95, 1996 Free Software Foundation, Inc.
%This texinfo.tex file is free software; you can redistribute it and/or
%modify it under the terms of the GNU General Public License as
% This automatically updates the version number based on RCS.
\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
-\deftexinfoversion$Revision: 1.13 $
+\deftexinfoversion$Revision: 1.14 $
\message{Loading texinfo package [Version \texinfoversion]:}
% If in a .fmt file, print the version number
\let\ptexrbrace=\}
\let\ptexstar=\*
\let\ptext=\t
+\let\ptextilde=\~
% Be sure we're in horizontal mode when doing a tie, since we make space
% equivalent to this in @example-like environments. Otherwise, a space
\global\let\tiepenalty = \@M
\gdef\tie{\leavevmode\penalty\tiepenalty\ }
}
+\let\~ = \tie % And make it available as @~.
\message{Basics,}
\hyphenation{ap-pen-dix}
\hyphenation{mini-buf-fer mini-buf-fers}
\hyphenation{eshell}
-\hyphenation{white-space}
% Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset
-\newdimen \normaloffset
+\newdimen \bindingoffset
+\newdimen \normaloffset
\newdimen\pagewidth \newdimen\pageheight
% Sometimes it is convenient to have everything in the transcript file
\showboxbreadth\maxdimen\showboxdepth\maxdimen
}%
-% For @cropmarks command.
-% Do @cropmarks to get crop marks.
-%
-\newif\ifcropmarks
-\let\cropmarks = \cropmarkstrue
+%---------------------Begin change-----------------------
%
-% Dimensions to add cropmarks at corners.
-% Added by P. A. MacKay, 12 Nov. 1986
+%%%% For @cropmarks command.
+% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
%
\newdimen\cornerlong \newdimen\cornerthick
-\newdimen\topandbottommargin
-\newdimen\outerhsize \newdimen\outervsize
+\newdimen \topandbottommargin
+\newdimen \outerhsize \newdimen \outervsize
\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
\outerhsize=7in
%\outervsize=9.5in
% Alternative @smallbook page size is 9.25in
\outervsize=9.25in
\topandbottommargin=.75in
-
-% Main output routine.
-\chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
-
-\newbox\headlinebox
-\newbox\footlinebox
+%
+%---------------------End change-----------------------
% \onepageout takes a vbox as an argument. Note that \pagecontents
% does insertions, but you have to call it yourself.
+\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}}
\def\onepageout#1{%
- \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
- %
+ \hoffset=\normaloffset
\ifodd\pageno \advance\hoffset by \bindingoffset
\else \advance\hoffset by -\bindingoffset\fi
- %
- % Do this outside of the \shipout so @code etc. will be expanded in
- % the headline as they should be, not taken literally (outputting ''code).
- \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
- \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
- %
{%
- % Have to do this stuff outside the \shipout because we want it to
- % take effect in \write's, yet the group defined by the \vbox ends
- % before the \shipout runs.
- %
- \escapechar = `\\ % use backslash in output files.
- \indexdummies % don't expand commands in the output.
- \normalturnoffactive % \ in index entries must not stay \, e.g., if
- % the page break happens to be in the middle of an example.
+ \escapechar = `\\ % use backslash in output files.
+ \indexdummies
\shipout\vbox{%
- \ifcropmarks \vbox to \outervsize\bgroup
- \hsize = \outerhsize
- \line{\ewtop\hfil\ewtop}%
- \nointerlineskip
- \line{%
- \vbox{\moveleft\cornerthick\nstop}%
- \hfill
- \vbox{\moveright\cornerthick\nstop}%
- }%
- \vskip\topandbottommargin
- \line\bgroup
- \hfil % center the page within the outer (page) hsize.
- \ifodd\pageno\hskip\bindingoffset\fi
- \vbox\bgroup
- \fi
- %
- \unvbox\headlinebox
+ {\let\hsize=\pagewidth \makeheadline}%
\pagebody{#1}%
- \ifdim\ht\footlinebox > 0pt
- % Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingxxx.)
- % The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 2\baselineskip
- \unvbox\footlinebox
- \fi
- %
- \ifcropmarks
- \egroup % end of \vbox\bgroup
- \hfil\egroup % end of (centering) \line\bgroup
- \vskip\topandbottommargin plus1fill minus1fill
- \boxmaxdepth = \cornerthick
- \line{%
- \vbox{\moveleft\cornerthick\nsbot}%
- \hfill
- \vbox{\moveright\cornerthick\nsbot}%
- }%
- \nointerlineskip
- \line{\ewbot\hfil\ewbot}%
- \egroup % \vbox from first cropmarks clause
- \fi
- }% end of \shipout\vbox
- }% end of group with \turnoffactive
+ {\let\hsize=\pagewidth \makefootline}%
+ }%
+ }%
\advancepageno
\ifnum\outputpenalty>-20000 \else\dosupereject\fi
}
+%%%% For @cropmarks command %%%%
+
+% Here is a modification of the main output routine for Near East Publications
+% This provides right-angle cropmarks at all four corners.
+% The contents of the page are centerlined into the cropmarks,
+% and any desired binding offset is added as an \hskip on either
+% site of the centerlined box. (P. A. MacKay, 12 November, 1986)
+%
+\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
+{\escapechar=`\\\relax % makes sure backslash is used in output files.
+ \shipout
+ \vbox to \outervsize{\hsize=\outerhsize
+ \vbox{\line{\ewtop\hfill\ewtop}}
+ \nointerlineskip
+ \line{\vbox{\moveleft\cornerthick\nstop}
+ \hfill
+ \vbox{\moveright\cornerthick\nstop}}
+ \vskip \topandbottommargin
+ \centerline{\ifodd\pageno\hskip\bindingoffset\fi
+ \vbox{
+ {\let\hsize=\pagewidth \makeheadline}
+ \pagebody{#1}
+ {\let\hsize=\pagewidth \makefootline}}
+ \ifodd\pageno\else\hskip\bindingoffset\fi}
+ \vskip \topandbottommargin plus1fill minus1fill
+ \boxmaxdepth\cornerthick
+ \line{\vbox{\moveleft\cornerthick\nsbot}
+ \hfill
+ \vbox{\moveright\cornerthick\nsbot}}
+ \nointerlineskip
+ \vbox{\line{\ewbot\hfill\ewbot}}
+ }}
+ \advancepageno
+ \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
+%
+% Do @cropmarks to get crop marks
+\def\cropmarks{\let\onepageout=\croppageout }
+
\newinsert\margin \dimen\margin=\maxdimen
\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
}
+%
% Here are the rules for the cropmarks. Note that they are
% offset so that the space between them is truly \outerhsize or \outervsize
% (P. A. MacKay, 12 November, 1986)
%
\def\ignore{\doignore{ignore}}
-% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
+% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text.
%
\def\ifinfo{\doignore{ifinfo}}
\def\ifhtml{\doignore{ifhtml}}
-\def\ifnottex{\doignore{ifnottex}}
\def\html{\doignore{html}}
\def\menu{\doignore{menu}}
\def\direntry{\doignore{direntry}}
% Make sure that spaces turn into tokens that match what \doignoretext wants.
\catcode32 = 10
%
- % Ignore braces, too, so mismatched braces don't cause trouble.
- \catcode`\{ = 9
- \catcode`\} = 9
- %
% And now expand that command.
\doignoretext
}
\pretolerance = 10000
%
% Do not execute instructions in @tex
- \def\tex{\doignore{tex}}%
+ \def\tex{\doignore{tex}}
}
% @set VAR sets the variable VAR to an empty value.
% didn't need it. Make sure the catcode of space is correct to avoid
% losing inside @example, for instance.
%
-\def\set{\begingroup\catcode` =10
- \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
- \parsearg\setxxx}
+\def\set{\begingroup\catcode` =10 \parsearg\setxxx}
\def\setxxx#1{\setyyy#1 \endsetyyy}
\def\setyyy#1 #2\endsetyyy{%
\def\temp{#2}%
% @value{foo} gets the text saved in variable foo.
%
-\def\value{\begingroup
- \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
- \valuexxx}
-\def\valuexxx#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {\{No value for ``#1''\}}%
- \else
- \csname SET#1\endcsname
- \fi
-\endgroup}
+\def\value#1{\expandafter
+ \ifx\csname SET#1\endcsname\relax
+ {\{No value for ``#1''\}}
+ \else \csname SET#1\endcsname \fi}
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
\def\ifclearfail{\nestedignore{ifclear}}
\defineunmatchedend{ifclear}
-% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
-% following, through the first @end iftex (etc.). Make `@end iftex'
-% (etc.) valid only after an @iftex.
+% @iftex always succeeds; we read the text following, through @end
+% iftex). But `@end iftex' should be valid only after an @iftex.
%
\def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
\defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
% We can't just want to start a group at @iftex (for example) and end it
% at @end iftex, since then @set commands inside the conditional have no
\openindices
\fixbackslash % Turn off hack to swallow `\input texinfo'.
\global\let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- % Just to be on the safe side, close the input stream before the \input.
- \openin 1 texinfo.cnf
- \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
- \closein1
- \temp
- %
\comment % Ignore the actual filename.
}
% We don't need math for this one.
\def\ttsl{\tenttsl}
-% Use Computer Modern fonts at \magstephalf (11pt).
-\newcount\mainmagstep
-\mainmagstep=\magstephalf
+%% Try out Computer Modern fonts at \magstephalf
+\let\mainmagstep=\magstephalf
% Set the font macro #1 to the font named #2, adding on the
% specified font prefix (normally `cm').
\font\indi=cmmi9
\font\indsy=cmsy9
-% Fonts for title page:
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\let\authorrm = \secrm
-
% Chapter (and unnumbered) fonts (17.28pt).
\setfont\chaprm\rmbshape{12}{\magstep2}
\setfont\chapit\itbshape{10}{\magstep3}
\setfont\chapsl\slbshape{10}{\magstep3}
\setfont\chaptt\ttbshape{12}{\magstep2}
\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
+\setfont\chapsf\sfbshape{12}{\magstep2}
\let\chapbf=\chaprm
\setfont\chapsc\scbshape{10}{\magstep3}
\font\chapi=cmmi12 scaled \magstep2
\setfont\ssecit\itbshape{10}{1315}
\setfont\ssecsl\slbshape{10}{1315}
\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
+\setfont\ssecttsl\ttslshape{10}{\magstep1}
\setfont\ssecsf\sfbshape{12}{\magstephalf}
\let\ssecbf\ssecrm
\setfont\ssecsc\scbshape{10}{\magstep1}
\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
+\font\ssecsy=cmsy10 scaled \magstep1
% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
% but that is not a standard magnification.
+% Fonts for title page:
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\let\authorrm = \secrm
+
% In order for the font changes to affect most math symbols and letters,
% we have to define the \textfont of the standard families. Since
% texinfo doesn't allow for producing subscripts and superscripts, we
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
\let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
\resetmathfonts}
-\def\titlefonts{%
- \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
- \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
- \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
- \let\tenttsl=\titlettsl
- \resetmathfonts \setleading{25pt}}
\def\chapfonts{%
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
\let\file=\samp
+\let\url=\samp % perhaps include a hypertex \special eventually
+\def\email#1{$\langle${\tt #1}$\rangle$}
% @code is a modification of @t,
% which makes spaces the same size as normal in the surrounding text.
{
\catcode`\-=\active
\catcode`\_=\active
-\catcode`\|=\active
\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
% The following is used by \doprintindex to insure that long function names
% wrap around. It is necessary for - and _ to be active before the index is
% read from the file, as \entry parses the arguments long before \code is
% ever called. -- mycroft
-% _ is always active; and it shouldn't be \let = to an _ that is a
-% subscript character anyway. Then, @cindex @samp{_} (for example)
-% fails. --karl
-\global\def\indexbreaks{%
- \catcode`\-=\active \let-\realdash
-}
+\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder}
}
\def\realdash{-}
+\def\realunder{_}
\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
+\def\codeunder{\normalunderscore\discretionary{}{}{}}
\def\codex #1{\tclose{#1}\endgroup}
%\let\exp=\tclose %Was temporary
% @kbd is like @code, except that if the argument is just one @key command,
% then @kbd has no effect.
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-% `example' (@kbd uses ttsl only inside of @example and friends),
-% or `code' (@kbd uses normal tty font always).
-\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
-\def\kbdinputstylexxx#1{%
- \def\arg{#1}%
- \ifx\arg\worddistinct
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
- \else\ifx\arg\wordexample
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
- \else\ifx\arg\wordcode
- \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
- \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is kbdinputdistinct. (Too much of a hassle to call the macro,
-% the catcodes are wrong for parsearg to work.)
-\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
-
+%
\def\xkey{\key}
\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
-
-% @url, @email. Quotes do not seem necessary.
-\let\url=\code % perhaps include a hypertex \special eventually
-% rms does not like the angle brackets --karl, 17may97.
-%\def\email#1{$\langle${\tt #1}$\rangle$}
-\let\email=\code
-
-% @uref (abbreviation for `urlref') takes an optional second argument
-% specifying the text to display. First (mandatory) arg is the url.
-%
-\def\uref#1{\urefxxx #1,,\finish}
-\def\urefxxx#1,#2,#3\finish{%
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \unhbox0\ (\code{#1})%
- \else
- \code{#1}%
- \fi
-}
+\else{\tclose{\ttsl\look}}\fi
+\else{\tclose{\ttsl\look}}\fi}
% Check if we are currently using a typewriter font. Since all the
% Computer Modern typewriter fonts have zero interword stretch (and
% shrink), and it is reasonable to expect all typewriter fonts to have
% this property, we can check that font parameter.
-%
+%
\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
% First the title page. Must do @settitle before @titlepage.
+\def\titlefont#1{{\titlerm #1}}
+
\newif\ifseenauthor
\newif\iffinishedtitlepage
%
% Now you can print the title using @title.
\def\title{\parsearg\titlezzz}%
- \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
+ \def\titlezzz##1{\leftline{\titlefont{##1}}
% print a rule at the page bottom also.
\finishedtitlepagefalse
\vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish}
+\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
- \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
- %
- % Leave some space for the footline. Hopefully ok to assume
- % @evenfooting will not be used by itself.
- \global\advance\pageheight by -\baselineskip
- \global\advance\vsize by -\baselineskip
-}
+\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish}
+\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
+\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
%
}% unbind the catcode of @.
\def\itemizeitem{%
\advance\itemno by 1
{\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{In hmode at itemizeitem}\fi
+\ifhmode \errmessage{\in hmode at itemizeitem}\fi
{\parskip=0in \hskip 0pt
\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
\vadjust{\penalty 1200}}%
% To make preamble:
%
-% Either define widths of columns in terms of percent of \hsize:
+% Either define widths of columns in terms of percent of \hsize:
% @multitable @columnfractions .25 .3 .45
% @item ...
%
% the preamble, break the line within one argument and it
% will parse correctly, i.e.,
%
-% @multitable {Column 1 template} {Column 2 template} {Column 3
+% @multitable {Column 1 template} {Column 2 template} {Column 3
% template}
% Not:
-% @multitable {Column 1 template} {Column 2 template}
+% @multitable {Column 1 template} {Column 2 template}
% {Column 3 template}
-% Each new table line starts with @item, each subsequent new column
+% Each new table line starts with @item, each subsequent new column
% starts with @tab. Empty columns may be produced by supplying @tab's
% with nothing between them for as many times as empty columns are needed,
% ie, @tab@tab@tab will produce two empty columns.
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
+% @item
+% first col stuff
+% @tab
+% second col stuff
+% @tab
+% third col
+% @item first col stuff @tab second col stuff
% @tab Many paragraphs of text may be used in any column.
-%
+%
% They will wrap at the width determined by the template.
% @item@tab@tab This will be in third column.
% @end multitable
% 0pt means it depends on current normal line spacing.
%%%%
-% Dimensions
+% Dimensions
\newskip\multitableparskip
\newskip\multitableparindent
% To parse everything between @multitable and @item :
\setuptable#1 \endsetuptable
% Need to reset this to 0 after \setuptable.
-\global\colcount=0\relax%
+\global\colcount=0\relax%
%
% This preamble sets up a generic column definition, which will
% be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
+ % \vtop will set a single line and will also let text wrap and
% continue for many paragraphs if desired.
\halign\bgroup&\global\advance\colcount by 1\relax%
\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
% In order to keep entries from bumping into each other
% we will add a \leftskip of \multitablecolspace to all columns after
% the first one.
- % If a template has been used, we will add \multitablecolspace
+ % If a template has been used, we will add \multitablecolspace
% to the width of each template entry.
% If user has set preamble in terms of percent of \hsize
% we will use that dimension as the width of the column, and
\ifsetpercent
\else
% If user has <not> set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace
+ % we will advance \hsize by \multitablecolspace
\advance\hsize by \multitablecolspace
\fi
% In either case we will make \leftskip=\multitablecolspace:
\leftskip=\multitablecolspace
\fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively marking
- % characters.
- \noindent\ignorespaces##\unskip\multistrut}\cr
+\noindent##\multistrut}\cr%
% \everycr will reset column counter, \colcount, at the end of
- % each line. Every column entry will cause \colcount to advance by one.
+ % each line. Every column entry will cause \colcount to advance by one.
% The table preamble
% looks at the current \colcount to find the correct column width.
\global\everycr{\noalign{%
-% \filbreak%% keeps underfull box messages off when table breaks over pages.
-% Maybe so, but it also creates really weird page breaks when the table
-% breaks over pages Wouldn't \vfil be better? Wait until the problem
-% manifests itself, so it can be fixed for real --karl.
+\filbreak%% keeps underfull box messages off when table breaks over pages.
\global\colcount=0\relax}}
}
%% to keep lines equally spaced
\let\multistrut = \strut
%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
+%% table. If not, do nothing.
%% If so, set to same dimension as multitablelinespace.
\else
\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
%\def\char{\realbackslash char}%
\def\TeX{\realbackslash TeX}%
\def\dots{\realbackslash dots }%
-\def\result{\realbackslash result}%
-\def\equiv{\realbackslash equiv}%
-\def\expansion{\realbackslash expansion}%
-\def\print{\realbackslash print}%
-\def\error{\realbackslash error}%
-\def\point{\realbackslash point}%
-\def\copyright{\realbackslash copyright}%
+\def\copyright{\realbackslash copyright }%
\def\tclose##1{\realbackslash tclose {##1}}%
\def\code##1{\realbackslash code {##1}}%
\def\dotless##1{\realbackslash dotless {##1}}%
\def\r##1{\realbackslash r {##1}}%
\def\i##1{\realbackslash i {##1}}%
\def\b##1{\realbackslash b {##1}}%
-\def\sc##1{\realbackslash sc {##1}}%
\def\cite##1{\realbackslash cite {##1}}%
\def\key##1{\realbackslash key {##1}}%
\def\file##1{\realbackslash file {##1}}%
\indexdummies % Must do this here, since \bf, etc expand at this stage
\escapechar=`\\
{%
- \let\folio=0% We will expand all macros now EXCEPT \folio.
+ \let\folio=0 % We will expand all macros now EXCEPT \folio.
\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
% so it will be output as is; and it will print as backslash.
%
% Define the macros used in formatting output of the sorted index material.
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
+% This is what you call to cause a particular index to get printed.
+% Write
+% @unnumbered Function Index
+% @printindex fn
+
\def\printindex{\parsearg\doprintindex}
+
\def\doprintindex#1{\begingroup
\dobreak \chapheadingskip{10000}%
%
\indexfonts \rm
\tolerance = 9500
\indexbreaks
+ \def\indexbackslash{\rawbackslashxx}%
+ % Index files are almost Texinfo source, but we use \ as the escape
+ % character. It would be better to use @, but that's too big a change
+ % to make right now.
+ \catcode`\\ = 0
+ \catcode`\@ = 11
+ \escapechar = `\\
+ \begindoublecolumns
%
% See if the index file exists and is nonempty.
\openin 1 \jobname.#1s
\ifeof 1
(Index is empty)
\else
- % Index files are almost Texinfo source, but we use \ as the escape
- % character. It would be better to use @, but that's too big a change
- % to make right now.
- \def\indexbackslash{\rawbackslashxx}%
- \catcode`\\ = 0
- \catcode`\@ = 11
- \escapechar = `\\
- \begindoublecolumns
\input \jobname.#1s
- \enddoublecolumns
\fi
\fi
\closein 1
+ \enddoublecolumns
\endgroup}
% These macros are used by the sorted index file itself.
\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
% Grab any single-column material above us.
- \output = {\global\setbox\partialpage = \vbox{%
- %
- % Here is a possibility not foreseen in manmac: if we accumulate a
- % whole lot of material, we might end up calling this \output
- % routine twice in a row (see the doublecol-lose test, which is
- % essentially a couple of indexes with @setchapternewpage off). In
- % that case, we must prevent the second \partialpage from
- % simply overwriting the first, causing us to lose the page.
- % This will preserve it until a real output routine can ship it
- % out. Generally, \partialpage will be empty when this runs and
- % this will be a no-op.
- \unvbox\partialpage
- %
- % Unvbox the main output page.
- \unvbox255
- \kern-\topskip \kern\baselineskip
- }}%
+ \output = {\global\setbox\partialpage
+ =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}%
\eject
%
- % Use the double-column output routine for subsequent pages.
- \output = {\doublecolumnout}%
+ % Now switch to the double-column output routine.
+ \output={\doublecolumnout}%
%
% Change the page size parameters. We could do this once outside this
% routine, in each of @smallbook, @afourpaper, and the default 8.5x11
% format, but then we repeat the same computation. Repeating a couple
% of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it in one place.
+ % execution time, so we may as well do it once.
%
% First we halve the line length, less a little for the gutter between
% the columns. We compute the gutter based on the line length, so it
% changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +-<1pt)
- % as it did when we hard-coded it.
+ % below is chosen so that the gutter has the same value (well, +- <
+ % 1pt) as it did when we hard-coded it.
%
% We put the result in a separate register, \doublecolumhsize, so we
% can restore it in \pagesofar, after \hsize itself has (potentially)
% (undoubled) page height minus any material left over from the
% previous page.
\dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
- % box0 will be the left-hand column, box2 the right.
+ % box0 will be the left-hand column, box1 the right.
\setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
\onepageout\pagesofar
- \unvbox255
- \penalty\outputpenalty
+ \unvbox255 \penalty\outputpenalty
}
\def\pagesofar{%
- % Re-output the contents of the output page -- any previous material,
+ % The contents of the output page -- any previous material,
% followed by the two boxes we just split.
\unvbox\partialpage
\hsize = \doublecolumnhsize
\wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
}
\def\enddoublecolumns{%
- \output = {\balancecolumns}\eject % split what we have
- \endgroup % started in \begindoublecolumns
- %
+ \output={\balancecolumns}\eject % split what we have
+ \endgroup
% Back to normal single-column typesetting, but take account of the
% fact that we just accumulated some stuff on the output page.
- \pagegoal = \vsize
+ \pagegoal=\vsize
}
\def\balancecolumns{%
- % Called at the end of the double column material.
- \setbox0 = \vbox{\unvbox255}%
+ % Called on the last page of the double column material.
+ \setbox0=\vbox{\unvbox255}%
\dimen@ = \ht0
\advance\dimen@ by \topskip
\advance\dimen@ by-\baselineskip
\divide\dimen@ by 2
\splittopskip = \topskip
% Loop until we get a decent breakpoint.
- {\vbadness=10000 \loop
- \global\setbox3=\copy0
+ {\vbadness=10000 \loop \global\setbox3=\copy0
\global\setbox1=\vsplit3 to\dimen@
- \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt
- \repeat}%
+ \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}%
\setbox0=\vbox to\dimen@{\unvbox1}%
\setbox2=\vbox to\dimen@{\unvbox3}%
\pagesofar
}
-\catcode`\@ = \other
+\catcode `\@=\other
\message{sectioning,}
% Define chapters, sections, etc.
-\newcount\chapno
-\newcount\secno \secno=0
-\newcount\subsecno \subsecno=0
-\newcount\subsubsecno \subsubsecno=0
+\newcount \chapno
+\newcount \secno \secno=0
+\newcount \subsecno \subsecno=0
+\newcount \subsubsecno \subsubsecno=0
% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno \appendixno = `\@
+\newcount \appendixno \appendixno = `\@
\def\appendixletter{\char\the\appendixno}
-\newwrite\contentsfile
+\newwrite \contentsfile
% This is called from \setfilename.
-\def\opencontents{\openout\contentsfile = \jobname.toc }
+\def\opencontents{\openout \contentsfile = \jobname.toc}
% Each @chapter defines this as the name of the chapter.
% page headings and footings can use it. @section does likewise
\def\thischapter{} \def\thissection{}
-\def\seccheck#1{\ifnum \pageno<0
- \errmessage{@#1 not allowed after generating table of contents}%
-\fi}
+\def\seccheck#1{\if \pageno<0 %
+\errmessage{@#1 not allowed after generating table of contents}\fi
+%
+}
\def\chapternofonts{%
- \let\rawbackslash=\relax
- \let\frenchspacing=\relax
- \def\result{\realbackslash result}%
- \def\equiv{\realbackslash equiv}%
- \def\expansion{\realbackslash expansion}%
- \def\print{\realbackslash print}%
- \def\TeX{\realbackslash TeX}%
- \def\dots{\realbackslash dots}%
- \def\result{\realbackslash result}%
- \def\equiv{\realbackslash equiv}%
- \def\expansion{\realbackslash expansion}%
- \def\print{\realbackslash print}%
- \def\error{\realbackslash error}%
- \def\point{\realbackslash point}%
- \def\copyright{\realbackslash copyright}%
- \def\tt{\realbackslash tt}%
- \def\bf{\realbackslash bf}%
- \def\w{\realbackslash w}%
- \def\less{\realbackslash less}%
- \def\gtr{\realbackslash gtr}%
- \def\hat{\realbackslash hat}%
- \def\char{\realbackslash char}%
- \def\tclose##1{\realbackslash tclose{##1}}%
- \def\code##1{\realbackslash code{##1}}%
- \def\samp##1{\realbackslash samp{##1}}%
- \def\r##1{\realbackslash r{##1}}%
- \def\b##1{\realbackslash b{##1}}%
- \def\key##1{\realbackslash key{##1}}%
- \def\file##1{\realbackslash file{##1}}%
- \def\kbd##1{\realbackslash kbd{##1}}%
- % These are redefined because @smartitalic wouldn't work inside xdef.
- \def\i##1{\realbackslash i{##1}}%
- \def\cite##1{\realbackslash cite{##1}}%
- \def\var##1{\realbackslash var{##1}}%
- \def\emph##1{\realbackslash emph{##1}}%
- \def\dfn##1{\realbackslash dfn{##1}}%
+\let\rawbackslash=\relax%
+\let\frenchspacing=\relax%
+\def\result{\realbackslash result}
+\def\equiv{\realbackslash equiv}
+\def\expansion{\realbackslash expansion}
+\def\print{\realbackslash print}
+\def\TeX{\realbackslash TeX}
+\def\dots{\realbackslash dots}
+\def\copyright{\realbackslash copyright}
+\def\tt{\realbackslash tt}
+\def\bf{\realbackslash bf }
+\def\w{\realbackslash w}
+\def\less{\realbackslash less}
+\def\gtr{\realbackslash gtr}
+\def\hat{\realbackslash hat}
+\def\char{\realbackslash char}
+\def\tclose##1{\realbackslash tclose {##1}}
+\def\code##1{\realbackslash code {##1}}
+\def\samp##1{\realbackslash samp {##1}}
+\def\r##1{\realbackslash r {##1}}
+\def\b##1{\realbackslash b {##1}}
+\def\key##1{\realbackslash key {##1}}
+\def\file##1{\realbackslash file {##1}}
+\def\kbd##1{\realbackslash kbd {##1}}
+% These are redefined because @smartitalic wouldn't work inside xdef.
+\def\i##1{\realbackslash i {##1}}
+\def\cite##1{\realbackslash cite {##1}}
+\def\var##1{\realbackslash var {##1}}
+\def\emph##1{\realbackslash emph {##1}}
+\def\dfn##1{\realbackslash dfn {##1}}
}
\newcount\absseclevel % used to calculate proper heading level
% because we don't want its macros evaluated now.
\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
{\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\donoderef %
\gdef\thischaptername{#1}%
\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
{\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash chapentry{\the\toks0}%
- {\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash chapentry
+ {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\appendixnoderef %
\unnumbchapmacro {#1}%
\gdef\thischapter{#1}\gdef\thissection{#1}%
{\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
{\chapternofonts%
-\toks0 = {#1}%
\edef\temp{{\realbackslash secentry %
-{\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
+{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\donoderef %
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
{\chapternofonts%
-\toks0 = {#1}%
\edef\temp{{\realbackslash secentry %
-{\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
+{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\appendixnoderef %
\def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
\plainsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
{\chapternofonts%
-\toks0 = {#1}%
\edef\temp{{\realbackslash subsecentry %
-{\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\donoderef %
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
{\chapternofonts%
-\toks0 = {#1}%
\edef\temp{{\realbackslash subsecentry %
-{\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\appendixnoderef %
\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
\plainsubsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
\subsubsecheading {#1}
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
{\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash subsubsecentry{\the\toks0}
+\edef\temp{{\realbackslash subsubsecentry %
+ {#1}
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
{\noexpand\folio}}}%
\escapechar=`\\%
\subsubsecheading {#1}
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
{\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash subsubsecentry{\the\toks0}%
+\edef\temp{{\realbackslash subsubsecentry{#1}%
{\appendixletter}
{\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
\escapechar=`\\%
\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
\plainsubsubsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
% Print any size section title.
-%
+%
% #1 is the section type (sec/subsec/subsubsec), #2 is the section
% number (maybe empty), #3 the text.
\def\sectionheading#1#2#3{%
\unnumbchapmacro{#1}\def\thischapter{}%
\begingroup % Set up to handle contents files properly.
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
- % We can't do this, because then an actual ^ in a section
- % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
- %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
+ \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
\raggedbottom % Worry more about breakpoints than the bottom.
\advance\hsize by -\contentsrightmargin % Don't use the full line length.
}
\escapechar=`\\
%
\let\,=\ptexcomma
+\let\~=\ptextilde
\let\{=\ptexlbrace
\let\}=\ptexrbrace
\let\.=\ptexdot
\let\*=\ptexstar
\let\dots=\ptexdots
-\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
-\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}
+\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}
\def\@{@}%
\let\bullet=\ptexbullet
\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext
%
\def\nonfillfinish{\afterenvbreak\endgroup}%
+% This macro is
\def\lisp{\begingroup
\nonfillstart
\let\Elisp = \nonfillfinish
\tt
- % Make @kbd do something special, if requested.
- \let\kbdfont\kbdexamplefont
\rawbackslash % have \ input char produce \ char from current font
\gobble
}
% Definitions of (, ) and & used in args for functions.
% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
- \global\advance\parencount by 1
-}
+\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested %
+\global\advance\parencount by 1 }
%
% This is the definition of ( when already inside a level of parens.
\gdef\opnested{\char`\(\global\advance\parencount by 1 }
%
\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
- % also in that case restore the outer-level definition of (.
- \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
- \global\advance \parencount by -1 }
+% also in that case restore the outer-level definition of (.
+\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
+\global\advance \parencount by -1 }
% If we encounter &foo, then turn on ()-hacking afterwards
\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
%
} % End of definition inside \activeparens
%% These parens (in \boldbrax) actually are a little bolder than the
%% contained text. This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
-\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\def\ampnr{\&}
-\def\lbrb{{\bf\char`\[}}
-\def\rbrb{{\bf\char`\]}}
+\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&}
+\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}}
% First, defname, which formats the header line itself.
% #1 should be the function name.
% This is used for \def{tp,vr}parsebody. It could probably be used for
% some of the others, too, with some judicious conditionals.
-%
+%
\def\parsebodycommon#1#2#3{%
\begingroup\inENV %
\medbreak %
}
% Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any). That's what this does.
-%
-\def\removeemptybraces\empty#1\relax{#1}
+% braces (if any). That's what this does, putting the result in \tptemp.
+%
+\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}%
% After \spacesplit has done its work, this is called -- #1 is the final
% thing to call, #2 the type name (which starts with \empty), and #3
% (which might be empty) the arguments.
-%
+%
\def\parsetpheaderline#1#2#3{%
- #1{\removeemptybraces#2\relax}{#3}%
+ \removeemptybraces#2\relax
+ #1{\tptemp}{#3}%
}%
\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
\hyphenchar\tensl=0
#1%
\hyphenchar\tensl=45
-\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
+\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi%
\interlinepenalty=10000
\advance\rightskip by 0pt plus 1fil
\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
\def\defmacx #1 {\errmessage{@defmacx in invalid context}}
\def\defspecx #1 {\errmessage{@defspecx in invalid context}}
\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
\def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
% @defmethod, and so on
\defunargs {#3}\endgroup %
}
-% @deftypemethod foo-class return-type foo-method args
-%
-\def\deftypemethod{%
- \defmethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
-%
-% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
-\def\deftypemethodheader#1#2#3#4{%
- \deftypefnheaderx{Method on #1}{#2}#3 #4\relax
-}
-
% @defmethod == @defop Method
\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
-% #1 is the data type. #2 is the name, perhaps followed by text that
-% is actually part of the data type, which should not be put into the index.
+% #1 is the data type. #2 is the name.
\def\deftypevarheader #1#2{%
-\dovarind#2 \relax% Make entry in variables index
+\doind {vr}{\code{#2}}% Make entry in variables index
\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
\interlinepenalty=10000
\endgraf\penalty 10000\vskip -\parskip\penalty 10000
\endgroup}
-\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
% @deftypevr {Global Flag} int enable
\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
-\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
+\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}%
\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
\interlinepenalty=10000
\endgraf\penalty 10000\vskip -\parskip\penalty 10000
% Use \turnoffactive so that punctuation chars such as underscore
% work in node names.
-\def\dosetq #1#2{{\let\folio=0 \turnoffactive
+\def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat%
\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
\next}}
#2% Output the suffix in any case.
}
+% Read the last existing aux file, if any. No error if none exists.
+
% This is the macro invoked by entries in the aux file.
-\def\xrdef #1#2{{%
- \catcode`\'=\other
- \expandafter\gdef\csname X#1\endcsname{#2}%
-}}
+\def\xrdef #1#2{
+{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}}
-% Read the last existing aux file, if any. No error if none exists.
-\def\readauxfile{\begingroup
- \catcode`\^^@=\other
- \catcode`\^^A=\other
- \catcode`\^^B=\other
- \catcode`\^^C=\other
- \catcode`\^^D=\other
- \catcode`\^^E=\other
- \catcode`\^^F=\other
- \catcode`\^^G=\other
- \catcode`\^^H=\other
- \catcode`\^^K=\other
- \catcode`\^^L=\other
- \catcode`\^^N=\other
- \catcode`\^^P=\other
- \catcode`\^^Q=\other
- \catcode`\^^R=\other
- \catcode`\^^S=\other
- \catcode`\^^T=\other
- \catcode`\^^U=\other
- \catcode`\^^V=\other
- \catcode`\^^W=\other
- \catcode`\^^X=\other
- \catcode`\^^Z=\other
- \catcode`\^^[=\other
- \catcode`\^^\=\other
- \catcode`\^^]=\other
- \catcode`\^^^=\other
- \catcode`\^^_=\other
- \catcode`\@=\other
- \catcode`\^=\other
- % It was suggested to define this as 7, which would allow ^^e4 etc.
- % in xref tags, i.e., node names. But since ^^e4 notation isn't
- % supported in the main text, it doesn't seem desirable. Furthermore,
- % that is not enough: for node names that actually contain a ^
- % character, we would end up writing a line like this: 'xrdef {'hat
- % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
- % argument, and \hat is not an expandable control sequence. It could
- % all be worked out, but why? Either we support ^^ or we don't.
- %
- % The other change necessary for this was to define \auxhat:
- % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
- % and then to call \auxhat in \setq.
- %
- \catcode`\~=\other
- \catcode`\[=\other
- \catcode`\]=\other
- \catcode`\"=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\$=\other
- \catcode`\#=\other
- \catcode`\&=\other
- % `\+ does not work, so use 43.
- \catcode43=\other
- % Make the characters 128-255 be printing characters
- {%
- \count 1=128
- \def\loop{%
- \catcode\count 1=\other
- \advance\count 1 by 1
- \ifnum \count 1<256 \loop \fi
- }%
+\def\readauxfile{%
+\begingroup
+\catcode `\^^@=\other
+\catcode `\\ 1=\other
+\catcode `\\ 2=\other
+\catcode `\^^C=\other
+\catcode `\^^D=\other
+\catcode `\^^E=\other
+\catcode `\^^F=\other
+\catcode `\^^G=\other
+\catcode `\^^H=\other
+\catcode `\\v=\other
+\catcode `\^^L=\other
+\catcode `\\ e=\other
+\catcode `\\ f=\other
+\catcode `\\10=\other
+\catcode `\\11=\other
+\catcode `\\12=\other
+\catcode `\\13=\other
+\catcode `\\14=\other
+\catcode `\\15=\other
+\catcode `\\16=\other
+\catcode `\\17=\other
+\catcode `\\18=\other
+\catcode `\\19=\other
+\catcode 26=\other
+\catcode `\^^[=\other
+\catcode `\^^\=\other
+\catcode `\^^]=\other
+\catcode `\^^^=\other
+\catcode `\^^_=\other
+\catcode `\@=\other
+\catcode `\^=\other
+\catcode `\~=\other
+\catcode `\[=\other
+\catcode `\]=\other
+\catcode`\"=\other
+\catcode`\_=\other
+\catcode`\|=\other
+\catcode`\<=\other
+\catcode`\>=\other
+\catcode `\$=\other
+\catcode `\#=\other
+\catcode `\&=\other
+% `\+ does not work, so use 43.
+\catcode 43=\other
+% Make the characters 128-255 be printing characters
+{%
+ \count 1=128
+ \def\loop{%
+ \catcode\count 1=\other
+ \advance\count 1 by 1
+ \ifnum \count 1<256 \loop \fi
}%
- % The aux file uses ' as the escape (for now).
- % Turn off \ as an escape so we do not lose on
- % entries which were dumped with control sequences in their names.
- % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
- % Reference to such entries still does not work the way one would wish,
- % but at least they do not bomb out when the aux file is read in.
- \catcode`\{=1
- \catcode`\}=2
- \catcode`\%=\other
- \catcode`\'=0
- \catcode`\\=\other
- %
- \openin 1 \jobname.aux
- \ifeof 1 \else
- \closein 1
- \input \jobname.aux
- \global\havexrefstrue
- \global\warnedobstrue
- \fi
- % Open the new aux file. TeX will close it automatically at exit.
- \openout\auxfile=\jobname.aux
+}%
+% the aux file uses ' as the escape.
+% Turn off \ as an escape so we do not lose on
+% entries which were dumped with control sequences in their names.
+% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
+% Reference to such entries still does not work the way one would wish,
+% but at least they do not bomb out when the aux file is read in.
+\catcode `\{=1 \catcode `\}=2
+\catcode `\%=\other
+\catcode `\'=0
+\catcode`\^=7 % to make ^^e4 etc usable in xref tags
+\catcode `\\=\other
+\openin 1 \jobname.aux
+\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue
+\global\warnedobstrue
+\fi
+% Open the new aux file. Tex will close it automatically at exit.
+\openout \auxfile=\jobname.aux
\endgroup}
% space to prevent strange expansion errors.)
\def\supereject{\par\penalty -20000\footnoteno =0 }
-% @footnotestyle is meaningful for info output only.
+% @footnotestyle is meaningful for info output only..
\let\footnotestyle=\comment
\let\ptexfootnote=\footnote
% Don't bother with the trickery in plain.tex to not require the
% footnote text as a parameter. Our footnotes don't need to be so general.
%
-% Oh yes, they do; otherwise, @ifset and anything else that uses
-% \parseargline fail inside footnotes because the tokens are fixed when
-% the footnote is read. --karl, 16nov96.
-%
-\long\gdef\footnotezzz{\insert\footins\bgroup
+\long\gdef\footnotezzz#1{\insert\footins{%
% We want to typeset this text as a normal paragraph, even if the
% footnote reference occurs in (for example) a display environment.
% So reset some parameters.
% expands into a box, it must come within the paragraph, lest it
% provide a place where TeX can split the footnote.
\footstrut
- \futurelet\next\fo@t
+ #1\strut}%
}
-\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
- \else\let\next\f@t\fi \next}
-\def\f@@t{\bgroup\aftergroup\@foot\let\next}
-\def\f@t#1{#1\@foot}
-\def\@foot{\strut\egroup}
}%end \catcode `\@=11
%
\def\finalout{\overfullrule=0pt}
-% @image. We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-%
-% Check for and read epsf.tex up front. If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = xepsf.tex
-\ifeof 1 \else
- \closein 1
- \def\epsfannounce{\toks0 = }% do not bother showing banner
- \input epsf.tex
-\fi
-%
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
- work. It is also included in the Texinfo distribution, or you can get
- it from ftp://ftp.tug.org/tex/epsf.tex.}
-%
-% Only complain once about lack of epsf.tex.
-\def\image#1{%
- \ifx\epsfbox\undefined
- \ifwarnednoepsf \else
- \errhelp = \noepsfhelp
- \errmessage{epsf.tex not found, images will be ignored}%
- \global\warnednoepsftrue
- \fi
- \else
- \imagexxx #1,,,\finish
- \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is just the usual extra ignored arg for parsing this stuff.
-\def\imagexxx#1,#2,#3,#4\finish{%
- % \epsfbox itself resets \epsf?size at each figure.
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
- \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
- \epsfbox{#1.eps}%
-}
% End of control word definitions.
-
\message{and turning on texinfo input format.}
\def\openindices{%
\def~{{\tt \char '176}}
\chardef\hat=`\^
\catcode`\^=\active
+\def\auxhat{\def^{'hat}}
\def^{{\tt \hat}}
\catcode`\_=\active
projects / thirdparty / coreutils.git / commitdiff
