phy: ti: alphabetically sort Kconfig and Makefile

Sort alphabetically the entries in the Kconfig and Makefile files.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260518142026.3098496-3-ioana.ciornei@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index b40f280191314798543f5a84e8048ed879b22ce2..dbe65500f20c8a4ad023f74cd32635576ee7a91f 100644 (file)
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -2,24 +2,29 @@
 #
 # Phy drivers for TI platforms
 #
-config PHY_DA8XX_USB
-       tristate "TI DA8xx USB PHY Driver"
-       depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
-       select GENERIC_PHY
-       select MFD_SYSCON
+config OMAP_CONTROL_PHY
+       tristate "OMAP CONTROL PHY Driver"
+       depends on ARCH_OMAP2PLUS || COMPILE_TEST
        help
-         Enable this to support the USB PHY on DA8xx SoCs.
-
-         This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+         Enable this to add support for the PHY part present in the control
+         module. This driver has API to power on the USB2 PHY and to write to
+         the mailbox. The mailbox is present only in omap4 and the register to
+         power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+         additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+         (PIPE3 PHY).
 
-config PHY_DM816X_USB
-       tristate "TI dm816x USB PHY driver"
-       depends on ARCH_OMAP2PLUS || COMPILE_TEST
+config OMAP_USB2
+       tristate "OMAP USB2 PHY Driver"
+       depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
        depends on USB_SUPPORT
        select GENERIC_PHY
        select USB_PHY
+       select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST
        help
-         Enable this for dm816x USB to work.
+         Enable this to support the transceiver that is part of SOC. This
+         driver takes care of all the PHY functionality apart from comparator.
+         The USB OTG controller communicates with the comparator using this
+         driver.
 
 config PHY_AM654_SERDES
        tristate "TI AM654 SERDES support"
@@ -33,6 +38,25 @@ config PHY_AM654_SERDES
          This option enables support for TI AM654 SerDes PHY used for
          PCIe.
 
+config PHY_DA8XX_USB
+       tristate "TI DA8xx USB PHY Driver"
+       depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
+       select GENERIC_PHY
+       select MFD_SYSCON
+       help
+         Enable this to support the USB PHY on DA8xx SoCs.
+
+         This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
+config PHY_DM816X_USB
+       tristate "TI dm816x USB PHY driver"
+       depends on ARCH_OMAP2PLUS || COMPILE_TEST
+       depends on USB_SUPPORT
+       select GENERIC_PHY
+       select USB_PHY
+       help
+         Enable this for dm816x USB to work.
+
 config PHY_J721E_WIZ
        tristate "TI J721E WIZ (SERDES Wrapper) support"
        depends on OF && (ARCH_K3 || COMPILE_TEST)
@@ -49,29 +73,20 @@ config PHY_J721E_WIZ
          three clock selects (pll0, pll1, dig) and resets for each of the
          lanes.
 
-config OMAP_CONTROL_PHY
-       tristate "OMAP CONTROL PHY Driver"
-       depends on ARCH_OMAP2PLUS || COMPILE_TEST
+config PHY_TI_GMII_SEL
+       tristate
+       select GENERIC_PHY
+       select REGMAP
        help
-         Enable this to add support for the PHY part present in the control
-         module. This driver has API to power on the USB2 PHY and to write to
-         the mailbox. The mailbox is present only in omap4 and the register to
-         power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
-         additional register to power on USB3 PHY/SATA PHY/PCIE PHY
-         (PIPE3 PHY).
+         This driver supports configuring of the TI CPSW Port mode depending on
+         the Ethernet PHY connected to the CPSW Port.
 
-config OMAP_USB2
-       tristate "OMAP USB2 PHY Driver"
-       depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
-       depends on USB_SUPPORT
+config PHY_TUSB1210
+       tristate "TI TUSB1210 ULPI PHY module"
+       depends on USB_ULPI_BUS
        select GENERIC_PHY
-       select USB_PHY
-       select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST
        help
-         Enable this to support the transceiver that is part of SOC. This
-         driver takes care of all the PHY functionality apart from comparator.
-         The USB OTG controller communicates with the comparator using this
-         driver.
+         Support for TI TUSB1210 USB ULPI PHY.
 
 config TI_PIPE3
        tristate "TI PIPE3 PHY Driver"
@@ -84,13 +99,6 @@ config TI_PIPE3
          This driver interacts with the "OMAP Control PHY Driver" to power
          on/off the PHY.
 
-config PHY_TUSB1210
-       tristate "TI TUSB1210 ULPI PHY module"
-       depends on USB_ULPI_BUS
-       select GENERIC_PHY
-       help
-         Support for TI TUSB1210 USB ULPI PHY.
-
 config TWL4030_USB
        tristate "TWL4030 USB Transceiver Driver"
        depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
@@ -103,11 +111,3 @@ config TWL4030_USB
          family chips (including the TWL5030 and TPS659x0 devices).
          This transceiver supports high and full speed devices plus,
          in host mode, low speed.
-
-config PHY_TI_GMII_SEL
-       tristate
-       select GENERIC_PHY
-       select REGMAP
-       help
-         This driver supports configuring of the TI CPSW Port mode depending on
-         the Ethernet PHY connected to the CPSW Port.

diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
index dcba2571c9bd8f6020c77893e335de610a1cad51..975fb8448ba5df7a1061496a65a2f63c7ebcefe8 100644 (file)
--- a/drivers/phy/ti/Makefile
+++ b/drivers/phy/ti/Makefile
@@ -1,11 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PHY_DA8XX_USB)            += phy-da8xx-usb.o
-obj-$(CONFIG_PHY_DM816X_USB)           += phy-dm816x-usb.o
 obj-$(CONFIG_OMAP_CONTROL_PHY)         += phy-omap-control.o
 obj-$(CONFIG_OMAP_USB2)                        += phy-omap-usb2.o
-obj-$(CONFIG_TI_PIPE3)                 += phy-ti-pipe3.o
-obj-$(CONFIG_PHY_TUSB1210)             += phy-tusb1210.o
-obj-$(CONFIG_TWL4030_USB)              += phy-twl4030-usb.o
 obj-$(CONFIG_PHY_AM654_SERDES)         += phy-am654-serdes.o
-obj-$(CONFIG_PHY_TI_GMII_SEL)          += phy-gmii-sel.o
+obj-$(CONFIG_PHY_DA8XX_USB)            += phy-da8xx-usb.o
+obj-$(CONFIG_PHY_DM816X_USB)           += phy-dm816x-usb.o
 obj-$(CONFIG_PHY_J721E_WIZ)            += phy-j721e-wiz.o
+obj-$(CONFIG_PHY_TI_GMII_SEL)          += phy-gmii-sel.o
+obj-$(CONFIG_PHY_TUSB1210)             += phy-tusb1210.o
+obj-$(CONFIG_TI_PIPE3)                 += phy-ti-pipe3.o
+obj-$(CONFIG_TWL4030_USB)              += phy-twl4030-usb.o