arm64: dts: imx8mn-vhip4-evalboard-v2: Correct interrupt flags

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 => IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 => IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted the
same logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW

Fixes: 5eb7405db99b ("arm64: dts: imx8mn: Add ifm VHIP4 EvalBoard v1 and v2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts b/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts
index 4dadfb7f78de27e68948e037559f751af0cfb7fc..43fd4d0041ef30d2c97e572476eb1d6f65832295 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts
@@ -99,7 +99,7 @@
 
 &ifm_pmic {
        interrupt-parent = <&gpio5>;
-       interrupts = <17 GPIO_ACTIVE_LOW>;
+       interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &iomuxc {