From: Daniel Golle Date: Sat, 18 Jul 2026 01:05:59 +0000 (+0100) Subject: regulator: mt6358: use regmap helper to read fixed LDO calibration X-Git-Tag: v7.2-rc5~3^2~1 X-Git-Url: http://git.ipfire.org/gitweb/index.cgi?a=commitdiff_plain;h=1d26f125501f3fbe6c259ab75bf6516299a0bf0e;p=thirdparty%2Fkernel%2Flinux.git regulator: mt6358: use regmap helper to read fixed LDO calibration The "fixed" LDOs with output voltage calibration use mt6358_get_buck_voltage_sel as their get_voltage_sel op, but the MT6358_REG_FIXED and MT6366_REG_FIXED entries do not populate da_vsel_reg/da_vsel_mask. The op therefore reads register 0x0 with a zero mask and shifts the result by ffs(0) - 1 = -1, which is undefined behaviour and gets flagged by UBSAN on every boot on MT6366 boards: UBSAN: shift-out-of-bounds in drivers/regulator/mt6358-regulator.c:384:38 shift exponent -1 is negative Call trace: mt6358_get_buck_voltage_sel+0xc8/0x120 regulator_get_voltage_rdev+0x70/0x170 set_machine_constraints+0x504/0xc38 regulator_register+0x324/0xc68 Besides the undefined shift, the returned selector is always 0, so the actual calibration offset programmed in _ANA_CON0 is never reported. The descriptor already carries the correct vsel_reg/vsel_mask (the ANA_CON0 calibration field), matching the regulator_set_voltage_sel_regmap op already in use. Read the selector back through regulator_get_voltage_sel_regmap instead. Fixes: cf08fa74c716 ("regulator: mt6358: Add output voltage fine tuning to fixed regulators") Signed-off-by: Daniel Golle Reviewed-by: Chen-Yu Tsai Tested-by: Chen-Yu Tsai Link: https://patch.msgid.link/dcd98d81dede338c9bbb9700a9613c848b702e49.1784336005.git.daniel@makrotopia.org Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c index f2bb3c1523ca..d6a0ec406b07 100644 --- a/drivers/regulator/mt6358-regulator.c +++ b/drivers/regulator/mt6358-regulator.c @@ -492,7 +492,7 @@ static const struct regulator_ops mt6358_volt_fixed_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .set_voltage_sel = regulator_set_voltage_sel_regmap, - .get_voltage_sel = mt6358_get_buck_voltage_sel, + .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap,