From: Abel Vesa Date: Thu, 14 May 2026 13:54:13 +0000 (+0300) Subject: arm64: dts: qcom: eliza: Describe the ADSP and USB related nodes X-Git-Url: http://git.ipfire.org/gitweb/index.cgi?a=commitdiff_plain;h=88ddafb01ec05bb3cd1ffb51b740bfbc989ab955;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: eliza: Describe the ADSP and USB related nodes Describe the ADSP remoteproc node along with its dependencies, including the IPCC mailbox, AOSS QMP and SMP2P links used for communication. The Eliza SoC features a USB 3.1 Gen 2 controller connected to a QMP combo PHY and an SNPS eUSB2 PHY. Describe them. Reviewed-by: Krzysztof Kozlowski Tested-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Abel Vesa Link: https://lore.kernel.org/r/20260514-eliza-adsp-usb-v5-1-a21056ffd892@oss.qualcomm.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi index 24c680795481..9fc07b6146e5 100644 --- a/arch/arm64/boot/dts/qcom/eliza.dtsi +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi @@ -6,10 +6,13 @@ #include #include #include +#include #include #include #include #include +#include +#include #include #include @@ -596,6 +599,30 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; @@ -624,6 +651,17 @@ #power-domain-cells = <1>; }; + ipcc: mailbox@406000 { + compatible = "qcom,eliza-ipcc", "qcom,ipcc"; + reg = <0x0 0x00406000 0x0 0x1000>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + qupv3_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x2000>; @@ -894,6 +932,55 @@ #reset-cells = <1>; }; + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,eliza-adsp-pas"; + reg = <0x0 0x03000000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + lpass_ag_noc: interconnect@7e40000 { compatible = "qcom,eliza-lpass-ag-noc"; reg = <0x0 0x07e40000 0x0 0xe080>; @@ -915,6 +1002,167 @@ #interconnect-cells = <2>; }; + usb_hsphy: phy@88e3000 { + compatible = "qcom,eliza-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x088e3000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,eliza-qmp-usb3-dp-phy", + "qcom,sm8650-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; + }; + + usb: usb@a600000 { + compatible = "qcom,eliza-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; + + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + phys = <&usb_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", "apps-usb"; + + iommus = <&apps_smmu 0x40 0x0>; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + usb-role-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,eliza-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x40000>, @@ -989,6 +1237,18 @@ #thermal-sensor-cells = <1>; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,eliza-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + spmi: arbiter@c400000 { compatible = "qcom,eliza-spmi-pmic-arb", "qcom,x1e80100-spmi-pmic-arb";