From: Sven Püschel Date: Wed, 20 May 2026 22:44:17 +0000 (+0200) Subject: media: rockchip: rga: avoid odd frame sizes for YUV formats X-Git-Url: http://git.ipfire.org/gitweb/index.cgi?a=commitdiff_plain;h=92f50870ae987b8e2e5334e4ee38f82f6f405d78;p=thirdparty%2Fkernel%2Flinux.git media: rockchip: rga: avoid odd frame sizes for YUV formats Avoid odd frame sizes for YUV formats, as they may cause undefined behavior. This is done in preparation for the RGA3, which hangs when the output format is set to 129x129 pixel YUV420 SP (NV12). This requirement is documented explicitly for the RGA3 in section 5.6.3 of the RK3588 TRM Part 2. For the RGA2 the RK3588 TRM Part 2 (section 6.1.2) and RK3568 TRM Part 2 (section 14.2) only mentions the x/y offsets and stride aligning requirements. But the vendor driver for the RGA2 also contains checks for the width and height to be aligned to 2 bytes. Reviewed-by: Nicolas Dufresne Signed-off-by: Sven Püschel Signed-off-by: Nicolas Dufresne Signed-off-by: Hans Verkuil --- diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c index f599c992829d..77b8c7ab7427 100644 --- a/drivers/media/platform/rockchip/rga/rga.c +++ b/drivers/media/platform/rockchip/rga/rga.c @@ -337,6 +337,19 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) struct rga_ctx *ctx = file_to_rga_ctx(file); const struct rga_hw *hw = ctx->rga->hw; struct rga_fmt *fmt; + struct v4l2_frmsize_stepwise frmsize = { + .min_width = hw->min_width, + .max_width = hw->max_width, + .min_height = hw->min_height, + .max_height = hw->max_height, + .step_width = 1, + .step_height = 1, + }; + + if (v4l2_is_format_yuv(v4l2_format_info(pix_fmt->pixelformat))) { + frmsize.step_width = 2; + frmsize.step_height = 2; + } if (V4L2_TYPE_IS_CAPTURE(f->type)) { const struct rga_frame *frm; @@ -358,11 +371,7 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) if (!fmt) fmt = &hw->formats[0]; - pix_fmt->width = clamp(pix_fmt->width, - hw->min_width, hw->max_width); - pix_fmt->height = clamp(pix_fmt->height, - hw->min_height, hw->max_height); - + v4l2_apply_frmsize_constraints(&pix_fmt->width, &pix_fmt->height, &frmsize); v4l2_fill_pixfmt_mp(pix_fmt, fmt->fourcc, pix_fmt->width, pix_fmt->height); pix_fmt->field = V4L2_FIELD_NONE;