William Lachance [Tue, 21 Apr 2009 17:51:46 +0000 (13:51 -0400)]
Bug 19567 - Make marshaling code usable without DBusConnection
Some projects want to reuse the DBus message format, without
actually going through a DBusConnection. This set of changes
makes a few functions from DBusMessage public, and adds a new
function to determine the number of bytes needed to demarshal
a message.
Colin Walters [Wed, 1 Apr 2009 16:02:00 +0000 (12:02 -0400)]
Bug 17803 - Fix both test case and validation logic
The previous commit had errors in both the test case and
the validation logic. The test case was missing a trailing
comma before the previous one, so we weren't testing the
signature we thought we were.
The validation logic was wrong because if the type was not valid,
we'd drop through the entire if clause, and thus skip returning
an error code, and accept the signature.
Colin Walters [Wed, 25 Feb 2009 16:10:15 +0000 (11:10 -0500)]
Bug 20137 - Fix alignment usage when demarshaling basics
We can't safely type-pun from e.g. char * to DBusBasicValue *, because
the latter has higher alignment requirements. Instead, create an
explicit pointer for each case.
Also, we mark each one volatile to sidestep strict aliasing issues, for
the future when we turn on strict aliasing support.
Original patch and review from Jay Estabrook <jay.estabrook@hp.com>.
The AC_CANONICAL_TARGET macro and the $target_os variables are used for the
target of compilers and other code-generation tools, and should not be used
during cross-compile of generic software. Replace them with
AC_CANONICAL_HOST and $host_os instead, as they should have been from the
start.
For a breakdown of what host, build and target machines are, please see
http://blog.flameeyes.eu/s/canonical-target .
Colin Walters [Sat, 20 Dec 2008 01:02:14 +0000 (20:02 -0500)]
Enable -Werror by default with --enable-maintainer-mode, and change warnings
Important compiler warnings were being lost in the noise from warnings
we know about but aren't problems, and moreover made using -Werror
difficult. Now we expect *all* developers and testers to be using
-Werror.
The AC_CANONICAL_TARGET macro and the $target_os variables are used for the
target of compilers and other code-generation tools, and should not be used
during cross-compile of generic software. Replace them with
AC_CANONICAL_HOST and $host_os instead, as they should have been from the
start.
For a breakdown of what host, build and target machines are, please see
http://blog.flameeyes.eu/s/canonical-target .
Colin Walters [Sat, 20 Dec 2008 01:02:14 +0000 (20:02 -0500)]
Enable -Werror by default with --enable-maintainer-mode, and change warnings
Important compiler warnings were being lost in the noise from warnings
we know about but aren't problems, and moreover made using -Werror
difficult. Now we expect *all* developers and testers to be using
-Werror.
Colin Walters [Thu, 18 Dec 2008 00:29:39 +0000 (19:29 -0500)]
Add requested_reply to send denials, and connection loginfo to "would deny"
The requested_reply field is necessary in send denials too because
it's used in the policy language. The connection loginfo lack in
"would deny" was just an oversight.
Colin Walters [Wed, 17 Dec 2008 21:01:28 +0000 (16:01 -0500)]
Add uid, pid, and command to security logs
Extend the current security logs with even more relevant
information than just the message content. This requires
some utility code to look up and cache (as a string)
the data such as the uid/pid/command when a connection is
authenticated.
Colin Walters [Thu, 18 Dec 2008 00:29:39 +0000 (19:29 -0500)]
Add requested_reply to send denials, and connection loginfo to "would deny"
The requested_reply field is necessary in send denials too because
it's used in the policy language. The connection loginfo lack in
"would deny" was just an oversight.
Colin Walters [Wed, 17 Dec 2008 21:01:28 +0000 (16:01 -0500)]
Add uid, pid, and command to security logs
Extend the current security logs with even more relevant
information than just the message content. This requires
some utility code to look up and cache (as a string)
the data such as the uid/pid/command when a connection is
authenticated.
Colin Walters [Tue, 9 Dec 2008 14:15:06 +0000 (09:15 -0500)]
Bug 18229: Allow signals
Our previous fix went too far towards lockdown; many things rely
on signals to work, and there's no really good reason to restrict
which signals can be emitted on the bus because we can't tie
them to a particular sender.
Colin Walters [Tue, 9 Dec 2008 14:15:06 +0000 (09:15 -0500)]
Bug 18229: Allow signals
Our previous fix went too far towards lockdown; many things rely
on signals to work, and there's no really good reason to restrict
which signals can be emitted on the bus because we can't tie
them to a particular sender.
Tomas Hoger [Thu, 4 Dec 2008 20:19:13 +0000 (15:19 -0500)]
Bug 18229 - Change system.conf to correctly deny non-reply sends by default
The previous rule <allow send_requested_reply="true"/> was actually
applied to all messages, even if they weren't a reply. This meant
that in fact the default DBus policy was effectively allow, rather
than deny as claimed.
This fix ensures that the above rule only applies to actual reply
messages. Signed-off-by: Colin Walters <walters@verbum.org>
Tomas Hoger [Thu, 4 Dec 2008 20:19:13 +0000 (15:19 -0500)]
Bug 18229 - Change system.conf to correctly deny non-reply sends by default
The previous rule <allow send_requested_reply="true"/> was actually
applied to all messages, even if they weren't a reply. This meant
that in fact the default DBus policy was effectively allow, rather
than deny as claimed.
This fix ensures that the above rule only applies to actual reply
messages. Signed-off-by: Colin Walters <walters@verbum.org>
Artem Bityutskiy [Fri, 29 Aug 2008 14:13:15 +0000 (17:13 +0300)]
Bug 17352: synchronize the file before renaming
Dbus is doing atomic file updates by copying them, changing
the copy, and re-naming them. However, it does not synchronize
the file before re-naming, which results in corruption in
case of unclean reboots. The reason for this is that file-systems
have write-back cache and they postpone writing data to the media.
This patch adds the missed fsync() for the Unix part. I do
not have windows so cannot provide a windows port fix.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Colin Walters <walters@verbum.org>
Artem Bityutskiy [Fri, 29 Aug 2008 14:13:15 +0000 (17:13 +0300)]
Bug 17352: synchronize the file before renaming
Dbus is doing atomic file updates by copying them, changing
the copy, and re-naming them. However, it does not synchronize
the file before re-naming, which results in corruption in
case of unclean reboots. The reason for this is that file-systems
have write-back cache and they postpone writing data to the media.
This patch adds the missed fsync() for the Unix part. I do
not have windows so cannot provide a windows port fix.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Colin Walters <walters@verbum.org>
Bug 16727: Handle ERANGE for getgr; fixes user in many groups
Patch originally from Noèl Köthe.
Modified by Colin Walters <walters@verbum.org>
* dbus/dbus-sysdeps-unix.c, dbus/dbus-sysdeps-unix-utils.c:
Use a while() loop to reallocate buffer if we get ERANGE
return. This fixes the case where a user is in a large
number of groups.
Bug 16839: Fix bus names in test case so it actually works.
* test/name-test/test-privserver.c (filter_session_message, main),
* test/name-test/test-privserver-client.c (open_shutdown_private_connection):
Replace TestServer with PrivServer to match the service definition files.
Ray Strode [Tue, 15 Jul 2008 08:01:49 +0000 (04:01 -0400)]
Fix leaks in bus_activation_get_environment error paths
Commit 91306ef938873fce8f2ae2d4a6b3282d0379c65a introduced
two memory leaks on OOM error paths. In one case the
environment string array wasn't getting freed, and in the
other case it was getting freed with dbus_free instead of
dbus_free_string_array.
Ray Strode [Fri, 11 Jul 2008 14:27:07 +0000 (10:27 -0400)]
Update man page to make the point of the <type> element more clear
There have been a number of patches in the past try to key system
versus session bus policy off of the message bus type, when the
policy should be distinguished from more fine-grained options in the
individulal policy files. Hopefully, this man page update will make
that more clear.
projects / thirdparty / dbus.git / log
