Junio C Hamano [Wed, 11 Feb 2026 20:29:06 +0000 (12:29 -0800)]
Merge branch 'sp/show-index-warn-fallback'
When "git show-index" is run outside a repository, it silently
defaults to SHA-1; the tool now warns when this happens.
* sp/show-index-warn-fallback:
show-index: use gettext wrapping in user facing error messages
show-index: warn when falling back to SHA-1 outside a repository
builtin/pack-objects: don't fetch objects when merging packs
The "--stdin-packs" option can be used to merge objects from multiple
packfiles given via stdin into a new packfile. One big upside of this
option is that we don't have to perform a complete rev walk to enumerate
objects. Instead, we can simply enumerate all objects that are part of
the specified packfiles, which can be significantly faster in very large
repositories.
There is one downside though: when we don't perform a rev walk we also
don't have a good way to learn about the respective object's names. As a
consequence, we cannot use the name hashes as a heuristic to get better
delta selection.
We try to offset this downside though by performing a localized rev
walk: we queue all objects that we're about to repack as interesting,
and all objects from excluded packfiles as uninteresting. We then
perform a best-effort rev walk that allows us to fill in object names.
There is one gotcha here though: when "--exclude-promisor-objects" has
not been given we will perform backfill fetches for any promised objects
that are missing. This used to not be an issue though as this option was
mutually exclusive with "--stdin-packs". But that has changed recently,
and starting with dcc9c7ef47 (builtin/repack: handle promisor packs with
geometric repacking, 2026-01-05) we will now repack promisor packs
during geometric compaction. The consequence is that a geometric repack
may now perform a bunch of backfill fetches.
We of course cannot pass "--exclude-promisor-objects" to fix this
issue -- after all, the whole intent is to repack objects part of a
promisor pack. But arguably we don't have to: the rev walk is intended
as best effort, and we already configure it to ignore missing links to
other objects. So we can adapt the walk to unconditionally disable
fetching any missing objects.
Do so and add a test that verifies we don't backfill any objects.
Reported-by: Lukas Wanko <lwanko@gitlab.com> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Mon, 9 Feb 2026 19:24:52 +0000 (20:24 +0100)]
xdiff-interface: stop using the_repository
Use the algorithm-agnostic is_null_oid() and push the dependency of
read_mmblob() on the_repository->objects to its callers. This allows it
to be used with arbitrary object databases.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of code paths that started using batched ref update API
(after Git 2.51 or so) lost detailed error output, which have been
corrected.
* kn/ref-batch-output-error-reporting-fix:
fetch: delay user information post committing of transaction
receive-pack: utilize rejected ref error details
fetch: utilize rejected ref error details
update-ref: utilize rejected error details if available
refs: add rejection detail to the callback function
refs: skip to next ref when current ref is rejected
Junio C Hamano [Mon, 9 Feb 2026 20:09:09 +0000 (12:09 -0800)]
Merge branch 'ps/history'
"git history" history rewriting UI.
* ps/history:
builtin/history: implement "reword" subcommand
builtin: add new "history" command
wt-status: provide function to expose status for trees
replay: support updating detached HEAD
replay: support empty commit ranges
replay: small set of cleanups
builtin/replay: move core logic into "libgit.a"
builtin/replay: extract core logic to replay revisions
Junio C Hamano [Mon, 9 Feb 2026 18:27:29 +0000 (10:27 -0800)]
rerere: minor documantation update
Let's not call our users "it". Also "rerere forget \*.c" does not
forget resolutions for just '*.c'; it forgets for all the files
whose filenames end with ".c".
Document `--verify` and rephrase the `--[no-]verify` section to lead
with the default, in imperative mood.[1]
Historically it makes sense that only the negated forms are documented;
they are all run by default and thus you only need to use hook options
if you want to turn some of them off. But, beyond just desiring uniform
documentation,[2] it’s very much possible to have, say, a Git alias with
`--no-verify` that you might sometimes want to turn back on with
the *positive* form.
Also mention the options in the “Hooks” section and mention that
`post-applypatch` cannot be skipped.
† 1: See e.g. acffc5e9 (doc: convert git-remote to synopsis style,
2025-12-20)
† 2: https://lore.kernel.org/git/xmqqcyct1mtq.fsf@gitster.g/
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option `--message-id` was added in a078f732 (git-am: add
--message-id/--no-message-id, 2014-11-25) back when git-interpret-
trailers(1) was relatively new. Let’s spell out that it is a trailer
and link to the dedicated trailer command.
Also use inline-verbatim for `Message-ID`.
Also link to git-interpret-trailers(1) on `--signoff`.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many mentions of commands using inline-verbatim or
emphasis ('). We just mention the command themselves, not specific
invocations like `git am <opts>`. Let’s link to them instead.
There are also many such mentions which then link to the command right
afterwards. Simplify to just using a link.
Also remove “see <gitlink>” phrases where they have now already
been mentioned.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Mon, 9 Feb 2026 10:08:43 +0000 (10:08 +0000)]
meson: fix building mergetool docs
Building the documentation with meson when the build directory is
not an immediate subdirectory of the source directory prints the
following error
[2/1349] Generating Documentation/mer... command (wrapped by meson to set env)
../../Documentation/generate-mergetool-list.sh: line 15: ../git-mergetool--lib.sh: No such file or directory
The build does not fail because the failure is upstream of a pipe. Fix
the error by passing the correct source directory when meson runs
"generate-mergetool-list.sh". As that script sets $MERGE_TOOLS_DIR
we do not need to set it in the environment when running the script.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 29 Jan 2026 19:06:16 +0000 (11:06 -0800)]
checkout: tell "parse_remote_branch" which command is calling it
When "git checkout <dwim>" and "git switch <dwim>" need to error out
due to ambiguity of the branch name <dwim>, these two commands give
an advise message with a sample command that tells the user how to
disambiguate from the parse_remote_branch() function. The sample
command hardcodes "git checkout", since this feature predates "git
switch" by a large margin. To a user who said "git switch <dwim>"
and got this message, it is confusing.
Pass the "enum checkout_command", which was invented in the previous
step for this exact purpose, down the call chain leading to
parse_remote_branch() function to change the sample command shown to
the user in this advise message.
Also add a bit more test coverage for this "fail to DWIM under
ambiguity" that we lack, as well as the message we produce when we
fail.
Reported-by: Simon Cheng <cyqsimon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 29 Jan 2026 19:06:15 +0000 (11:06 -0800)]
checkout: pass program-readable token to unified "main"
The "git checkout", "git switch", and "git restore" commands share a
single implementation, checkout_main(), which switches error message
it gives using the usage string passed by each of these three
front-ends.
In order to be able to tweak behaviours of the commands based on
which one we are executing, invent an enum that denotes which one of
these three commands is currently executing, and pass that to
checkout_main() instead. With this step, there is no externally
visible behaviour change, as this enum parameter is only used to
choose among the three usage strings.
René Scharfe [Sun, 8 Feb 2026 17:01:24 +0000 (18:01 +0100)]
version: stop using the_repository
Actually it has never been used in version.c since cf7ee481902 (agent:
advertise OS name via agent capability, 2025-02-15) added the dependency
macro. Remove it, along with the also unused struct declaration.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file-convert: always make sure object ID algo is valid
In some cases, we zero-initialize our object IDs, which sets the algo
member to zero as well, which is not a valid algorithm number. This is
a bad practice, but we typically paper over it in many cases by simply
substituting the repository's hash algorithm.
However, our new Rust loose object map code doesn't handle this
gracefully and can't find object IDs when the algorithm is zero because
they don't compare equal to those with the correct algo field. In
addition, the comparison code doesn't have any knowledge of what the
main algorithm is because that's global state, so we can't adjust the
comparison.
To make our code function properly and to avoid propagating these bad
entries, if we get a source object ID with a zero algo, just make a copy
of it with the fixed algorithm. This has the benefit of also fixing the
object IDs if we're in a single algorithm mode as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rust: add a small wrapper around the hashfile code
Our new binary object map code avoids needing to be intimately involved
with file handling by simply writing data to an object implement Write.
This makes it very easy to test by writing to a Cursor wrapping a Vec
for tests, and thus decouples it from intimate knowledge about how we
handle files.
However, we will actually want to write our data to an actual file,
since that's the most practical way to persist data. Implement a
wrapper around the hashfile code that implements the Write trait so that
we can write our object map into a file.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our current loose object format has a few problems. First, it is not
efficient: the list of object IDs is not sorted and even if it were,
there would not be an efficient way to look up objects in both
algorithms.
Second, we need to store mappings for things which are not technically
loose objects but are not packed objects, either, and so cannot be
stored in a pack index. These kinds of things include shallows, their
parents, and their trees, as well as submodules. Yet we also need to
implement a sensible way to store the kind of object so that we can
prune unneeded entries. For instance, if the user has updated the
shallows, we can remove the old values.
For these reasons, introduce a new binary object map format. The
careful reader will notice that it resembles very closely the pack index
v3 format. Add an in-memory object map as well, and allow writing to a
batched map, which can then be written later as one of the binary object
maps. Include several tests for round tripping and data lookup across
algorithms.
Note that the use of this code elsewhere in Git will involve some C code
and some C-compatible code in Rust that will be introduced in a future
commit. Thus, for example, we ignore the fact that if there is no
current batch and the caller asks for data to be written, this code does
nothing, mostly because this code also does not involve itself with
opening or manipulating files. The C code that we will add later will
implement this functionality at a higher level and take care of this,
since the code which is necessary for writing to the object store is
deeply involved with our C abstractions and it would require extensive
work (which would not be especially valuable at this point) to port
those to Rust.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future commit, we'll want to hash some data when dealing with an
object map. Let's make this easy by creating a structure to hash
objects and calling into the C functions as necessary to perform the
hashing. For now, we only implement safe hashing, but in the future we
could add unsafe hashing if we want. Implement Clone and Drop to
appropriately manage our memory. Additionally implement Write to make
it easy to use with other formats that implement this trait.
While we're at it, add some tests for the various hashing cases.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cargo uses the build.rs script to determine how to compile and link a
binary. The only binary we're generating, however, is for our tests,
but in a future commit, we're going to link against libgit.a for some
functionality and we'll need to make sure the test binaries are
complete.
Add a build.rs file for this case and specify the files we're going to
be linking against. Because we cannot specify different dependencies
when building our static library versus our tests, update the Makefile
to specify these dependencies for our static library to avoid race
conditions during build.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Cargo links binaries with MSVC, it uses the link.exe linker from
PATH to do so. However, when running under a shell from MSYS, such as
when building with the Git for Windows SDK, which we do in CI, the
/ming64/bin and /usr/bin entries are first in PATH. That means that the
Unix link binary shows up first, which obviously does not work for
linking binaries in any useful way.
To solve this problem, adjust PATH to place those binaries at the end of
the list instead of the beginning. This allows access to the normal
Unix tools, but link.exe will be the compiler's linker. Make sure to
export PATH explicitly: while this should be the default, it's more
robust to not rely on the shell operating in a certain way.
The reason this has not shown up before is that we typically link our
binaries from the C compiler. However, now that we're about to
introduce a Rust build script (build.rs file), Rust will end up linking
that script to further drive Cargo, in which case we'll invoke the
linker from it. There are other solutions, such as using LLD, but this
one is simple and reliable and is most likely to work with existing
systems.
Signed-off-by: Ezekiel Newren <ezekielnewren@gmail.com> Signed-off-by: brian m. carlson <bk2204@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'd like to be able to hash our data in Rust using the same contexts as
in C. However, we need our helper functions to not be inline so they
can be linked into the binary appropriately. In addition, to avoid
managing memory manually and since we don't know the size of the hash
context structure, we want to have simple alloc and free functions we
can use to make sure a context can be easily dynamically created.
Expose the helper functions and create alloc, free, and init functions
we can call.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to call this code from Rust and ensure that the types are the
same for compatibility, which is easiest to do if the type is a fixed
size. Since unsigned int is 32 bits on all the platforms we care about,
define it as a uint32_t instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, users can internally access the contents of the ObjectID
struct, which can lead to data that is not valid, such as invalid
algorithms or non-zero-padded hash values. These can cause problems
down the line as we use them more.
Add a constructor for ObjectID that allows us to set these values and
also provide an accessor for the algorithm so that we can access it. In
addition, provide useful Display and Debug implementations that can
format our data in a useful way.
Now that we have the ability to work with these various components in a
nice way, add some tests as well to make sure that ObjectID and
HashAlgorithm work together as expected.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C, it's easy for us to look up a hash algorithm structure by its
offset by simply indexing the hash_algos array. However, in Rust, we
sometimes need a pointer to pass to a C function, but we have our own
hash algorithm abstraction.
To get one from the other, let's provide a simple function that looks up
the C structure from the offset and expose it in Rust.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works very similarly to the existing one in C except that it
doesn't provide any functionality to hash an object. We don't currently
need that right now, but the use of those function pointers do make it
substantially more difficult to write a bit-for-bit identical structure
across the C/Rust interface, so omit them for now.
Instead of the more customary "&self", use "self", because the former is
the size of a pointer and the latter is the size of an integer on most
systems. Don't define an unknown value but use an Option for that
instead.
Update the object ID structure to allow slicing the data appropriately
for the algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'd like to be able to write some Rust code that can work with object
IDs. Add a structure here that's identical to struct object_id in C,
for easy use in sharing across the FFI boundary. We will use this
structure in several places in hot paths, such as index-pack or
pack-objects when converting between algorithms, so prioritize efficient
interchange over a more idiomatic Rust approach.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use an int for this value, but we'll define this structure
from Rust in a future commit and we want to ensure that our data types
are exactly identical. To make that possible, use a uint32_t for the
hash algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we set up a repository that doesn't have a compatibility hash
algorithm, we set the destination algorithm object to NULL. In such a
case, we want to silently do nothing instead of crashing, so simply
treat the operation as a no-op and copy the object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
repository: require Rust support for interoperability
We'll be implementing some of our interoperability code, like the loose
object map, in Rust. While the code currently compiles with the old
loose object map format, which is written entirely in C, we'll soon
replace that with the Rust-based implementation.
Require the use of Rust for compatibility mode and die if it is not
supported. Because the repo argument is not used when Rust is missing,
cast it to void to silence the compiler warning, which we do not care
about.
Add a prerequisite in our tests, RUST, that checks if Rust functionality
is available and use it in the tests that handle interoperability.
This is technically a regression in functionality compared to our
existing state, but pack index v3 is not yet implemented and thus the
functionality is mostly quite broken, which is why we've recently marked
this functionality as experimental. We don't believe anyone is getting
useful use out of the interoperability code in its current state, so no
actual users should be negatively impacted by this change.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yannik Tausch [Sat, 7 Feb 2026 21:37:48 +0000 (22:37 +0100)]
merge-file: honor merge.conflictStyle outside of a repository
When running outside a repository, git merge-file ignores the
merge.conflictStyle configuration variable entirely. Since the
function receives `repo` from the caller (which is NULL outside a
repository), and repo_config() falls back to reading system and user
configuration when passed NULL, pass `repo` to repo_config()
unconditionally.
Also document that merge.conflictStyle is honored.
Signed-off-by: Yannik Tausch <dev@ytausch.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sam Bostock [Fri, 6 Feb 2026 19:16:23 +0000 (19:16 +0000)]
merge-ours: integrate with sparse-index
The merge-ours built-in opens the index to compare it against HEAD.
The machinery used to do this (i.e. run_diff_index()) is capable of
working with a sparse index, but the start-up sequence of this
command does not take the necessary steps, so we end up expanding the
index fully before doing the comparison.
In order to convince sparse-index.c:is_sparse_index_allowed() to
return true, we need to:
- Read basic configuration with git_default_config so that global
variables like core_apply_sparse_checkout are populated.
merge-ours currently does not read configuration at all.
- Set command_requires_full_index to 0.
With that, the command can work without expanding the index fully
before doing its work.
Signed-off-by: Sam Bostock <sam@sambostock.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sam Bostock [Fri, 6 Feb 2026 19:16:22 +0000 (19:16 +0000)]
merge-ours: drop USE_THE_REPOSITORY_VARIABLE
The merge-ours built-in uses the `the_repository` global to access
the repository. The project is moving away from this global in favor
of the `repo` parameter that is passed to each built-in command.
Since merge-ours is registered with RUN_SETUP, `repo` is guaranteed
to be non-NULL and can be used directly.
Drop the USE_THE_REPOSITORY_VARIABLE macro and use `repo` throughout.
While at it, remove a stray double blank line between the #include
block and the usage string.
Signed-off-by: Sam Bostock <sam@sambostock.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
- git-add.adoc: Update the --force documentation for submodule behaviour
to be added even the given configuration ignore=all.
- gitmodules.adoc and config/submodule.adoc: The submodule config
ignore=all now need --force in order to update the index.
Signed-off-by: Claus Schneider(Eficode) <claus.schneider@eficode.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: fix existing tests when add an ignore=all submodule
There are tests that rely on "git add <submodule>" to update the in the
reference in the parent repository which have been updated to use the
--force option.
tests: t2206-add-submodule-ignored: ignore=all and add --force tests
The tests verify that the submodule behavior is intact and updating the
config with ignore=all also behaves as intended with configuration in
.gitmodules and configuration given on the command line.
The usage of --force is showcased and tested in the test suite.
The test file is added to meson.build for execution.
Signed-off-by: Claus Schneider(Eficode) <claus.schneider@eficode.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache: submodule add need --force given ignore=all configuration
Submodules configured with ignore=all are now skipped during add operations
unless overridden by --force and the submodule path is explicitly specified.
A message is printed (like ignored files) guiding the user to use the
--force flag if the user explicitly wants to update the submodule reference.
The reason for the change is to support branch tracking in submodules
with configuration `submdule.<name>.branch` or similar workflows where the
user is not interested in tracking each update of the sha1 in the submdule.
You can additionally set `submodule.<name>.ignore=all` and the `git status`
will state nothing and, with this patch, the `git add` does not either - as
the default behaviour. This patch changes the workflow to a more logical
behaviour and similar to workflow for ignored files.
The patch gives more scenarios for submodules to be used effectively with
less friction similar to the "repo" tool. A submodule can be added for many
different reasons than a hard dependency. It can be added as loosely
coupled dependencies whereas the user wants the latest based on the
configuration `submoule.<name>.branch`, but are not interested to track
each commit in the `super-repo`. Currently it gives friction of handling
conflicts between branches even the sha1's are fast-forward and the user
just wants the latest in any way. The user can still add a sha1 explicitly
to track updates.
Signed-off-by: Claus Schneider(Eficode) <claus.schneider@eficode.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache: update add_files_to_cache take param ignored_too
The ignored_too parameter is added to the function
add_files_to_cache for usage of explicit updating the index for the updated
submodule using the explicit patchspec to the submodule.
Signed-off-by: Claus Schneider(Eficode) <claus.schneider@eficode.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jean-Noël Avila [Fri, 6 Feb 2026 04:12:25 +0000 (04:12 +0000)]
doc: fix some style issues in git-clone and for-each-ref-options
* spell out all forms of --[no-]reject-shallow in git-clone
* use imperative mood for the first line of options
* Use asciidoc NOTE macro
* fix markups
Reviewed-by: Kristoffer Haugsbakk <kristofferhaugsbakk@fastmail.com> Signed-off-by: Jean-Noël Avila <jn.avila@free.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 4 Feb 2026 21:23:06 +0000 (13:23 -0800)]
whitespace: symbolic links usually lack LF at the end
For a patch that touches a symbolic link, it is perfectly normal
that the contents ends with "\ No newline at end of file". The
checks introduced recently to detect incomplete lines (i.e., a text
file that lack the newline on its final line) should not trigger.
Disable the check early for symbolic links, both in "git apply" and
"git diff" and test them. For "git apply", we check only when the
postimage is a symbolic link regardless of the preimage, and we only
care about preimage when applying in reverse. Similarly, "git diff"
would warn only when the postimage is a symbolic link, or the
preimage when running "git diff -R".
Collin Funk [Fri, 6 Feb 2026 01:46:09 +0000 (17:46 -0800)]
global: constify some pointers that are not written to
The recent glibc 2.43 release had the following change listed in its
NEWS file:
For ISO C23, the functions bsearch, memchr, strchr, strpbrk, strrchr,
strstr, wcschr, wcspbrk, wcsrchr, wcsstr and wmemchr that return
pointers into their input arrays now have definitions as macros that
return a pointer to a const-qualified type when the input argument is
a pointer to a const-qualified type.
When compiling with GCC 15, which defaults to -std=gnu23, this causes
many warnings like this:
merge-ort.c: In function ‘apply_directory_rename_modifications’:
merge-ort.c:2734:36: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
2734 | char *last_slash = strrchr(cur_path, '/');
| ^~~~~~~
This patch fixes the more obvious ones by making them const when we do
not write to the returned pointer.
Signed-off-by: Collin Funk <collin.funk1@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The computation of column width made by "git diff --stat" was
confused when pathnames contain non-ASCII characters.
* lp/diff-stat-utf8-display-width-fix:
t4073: add test for diffstat paths length when containing UTF-8 chars
diff: improve scaling of filenames in diffstat to handle UTF-8 chars
There is no option --signed-off-cc (without -by) for git send-email.
Signed-off-by: Matěj Cepl <mcepl@cepl.eu>
[kh: rebased and changed subject to house style] Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
[jc: minor copyedit in the commit message] Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 2 Feb 2026 21:07:58 +0000 (13:07 -0800)]
test: optionally test contrib in CI
Recently it was reported that a topic merged to 'next' broke build
and test for contrib/subtree part of the system.
Instead of having those who run 'next' or 'master' to hit the build
and test breakage and report to us, make sure we notice breakages in
contrib/ area before they hit my tree at all, during their own
presubmit testing.
While the Meson build instructions already handle the case where msgfmt
wasn't found, we forgot to mark the dependency itself as optional. This
causes an error in case the executable could not be found:
Project name: gitk
Project version: undefined
Program sh found: YES (C:\Program Files\Git\bin\sh.EXE)
Program wish found: YES (C:\Program Files\Git\mingw64\bin\wish.EXE)
Program chmod found: YES (C:\Program Files\Git\usr\bin\chmod.EXE)
Program mv found: YES (C:\Program Files\Git\usr\bin\mv.EXE)
Program sed found: YES (C:\Program Files\Git\usr\bin\sed.EXE)
Program msgfmt found: NO
subprojects\gitk\meson.build:28:3: ERROR: Program 'msgfmt' not found or not executable
Fix the issue by adding the `required: false` parameter.
Wire up both gitk and git-gui in Meson as subprojects. These two
programs should be the last missing pieces for feature compatibility
with our Makefile for distributors.
Note that Meson expects subprojects to live in the "subprojects/"
directory. Create symlinks to fulfill this requirement.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
(signature and signed data in this example is taken from Linux commit 756f80cee766574ae282baa97fdcf9cc). So GnuPG is relaxed and the fact that
the key is expired is only worth a "Note" which is weaker than e.g.
gpg: WARNING: The key's User ID is not certified with a trusted signature!
gpg: There is no indication that the signature belongs to the owner.
which git still considers ok.
So stop coloring the signature by an expired key red and handle it like
any other good signature.
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 4 Feb 2026 17:22:21 +0000 (09:22 -0800)]
Merge branch 'ar/run-command-hook-take-2' into ar/config-hooks
* ar/run-command-hook-take-2:
receive-pack: convert receive hooks to hook API
receive-pack: convert update hooks to new API
run-command: poll child input in addition to output
hook: add jobs option
reference-transaction: use hook API instead of run-command
transport: convert pre-push to hook API
hook: allow separate std[out|err] streams
hook: convert 'post-rewrite' hook in sequencer.c to hook API
hook: provide stdin via callback
run-command: add stdin callback for parallelization
run-command: add helper for pp child states
t1800: add hook output stream tests
Junio C Hamano [Tue, 3 Feb 2026 21:26:00 +0000 (13:26 -0800)]
diff-highlight: allow testing with Git 3.0 breaking changes
The diff-highlight (in contrib/) comes with its own test script,
which relies on the initial branch name being 'master'. This is not
just encoded in the test logic, but in the illustration in the file
that shows the topology of the history.
Force the initial branch name to 'master' to allow it pass.
Toon Claes [Tue, 3 Feb 2026 10:29:03 +0000 (11:29 +0100)]
cocci: extend MEMZERO_ARRAY() rules
Recently the MEMZERO_ARRAY() macro was introduced. In that commit also
coccinelle rules were added to capture cases that can be converted to
use that macro.
Later a few more cases were manually converted to use the macro, but
coccinelle didn't capture those. Extend the rules to capture those as
well.
In various cases the code could be further beautified by removing
parentheses which are no longer needed. Modify the coccinelle rules to
optimize those as well and fix them.
During conversion indentation also used spaces where tabs should be
used, fix that in one go.
Signed-off-by: Toon Claes <toon@iotcl.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushkar Singh [Tue, 3 Feb 2026 16:48:16 +0000 (16:48 +0000)]
subtree: validate --prefix against commit in split
git subtree split currently validates --prefix against the working tree.
This breaks when splitting an older commit or when the working tree does
not contain the subtree, even though the commit does.
For example:
git subtree split --prefix=pkg <commit>
fails if pkg was removed later, even though it exists in <commit>.
Fix this by validating the prefix against the specified commit using
git cat-file instead of the working tree.
Add a test to ensure this behavior does not regress.
Signed-off-by: Pushkar Singh <pushkarkumarsingh1970@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
47beb37b (shortlog: match commit trailers with --group, 2020-09-27)
added the `trailer` bullet point with three paragraphs.[1] Later, 3dc95e09 (shortlog: support arbitrary commit format `--group`s,
2022-10-24) put the single-paragraph bullet point about `format` right
after the first paragraph about `trailer`. That meant that the second
and third paragraphs for `trailer` got moved to `format`.
Move the two paragraphs back to `trailer`. We now also need one blank
line before the final bullet point so that it does not get joined with
the second bullet point.
† 1: Technically the bullet list formatting was immediately fixed to
include all three paragraphs in 63d24fa0 (shortlog: allow multiple
groups to be specified, 2020-09-27)
Acked-by: Jeff King <peff@peff.net> Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Justin Tobler [Tue, 3 Feb 2026 00:10:02 +0000 (18:10 -0600)]
odb: transparently handle common transaction behavior
A new ODB transaction is created and returned via
`odb_transaction_begin()` and stored in the ODB. Only a single
transaction may be pending at a time. If the ODB already has a
transaction, the function is expected to return NULL. Similarly, when
committing a transaction via `odb_transaction_commit()` the transaction
being committed must match the pending transaction and upon commit reset
the ODB transaction to NULL.
These behaviors apply regardless of the ODB transaction implementation.
Move the corresponding logic into `odb_transaction_{begin,commit}()`
accordingly.
Signed-off-by: Justin Tobler <jltobler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Justin Tobler [Tue, 3 Feb 2026 00:10:01 +0000 (18:10 -0600)]
odb: prepare `struct odb_transaction` to become generic
An ODB transaction handles how objects are stored temporarily and
eventually committed. Due to object storage being implemented
differently for a given ODB source, the ODB transactions must be
implemented in a manner specific to the source the objects are being
written to. To provide generic transactions, `struct odb_transaction` is
updated to store a commit callback that can be configured to support a
specific ODB source. For now `struct odb_transaction_files` is the
only transaction type and what is always returned when starting a
transaction.
Signed-off-by: Justin Tobler <jltobler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Justin Tobler [Tue, 3 Feb 2026 00:10:00 +0000 (18:10 -0600)]
object-file: rename transaction functions
In a subsequent commit, ODB transactions are made more generic to
facilitate each ODB source providing its own transaction handling.
Rename `object_file_transaction_{begin,commit}()` to
`odb_transaction_files_{begin,commit}()` to better match the future
source specific transaction implementation.
Signed-off-by: Justin Tobler <jltobler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Justin Tobler [Tue, 3 Feb 2026 00:09:59 +0000 (18:09 -0600)]
odb: store ODB source in `struct odb_transaction`
Each `struct odb_transaction` currently stores a reference to the
`struct object_database`. Since transactions are handled per object
source, instead store a reference to the source.
Signed-off-by: Justin Tobler <jltobler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 1 Feb 2026 11:47:53 +0000 (12:47 +0100)]
blame: fix coloring for repeated suspects
The option --ignore-rev passes the blame to an older commit. This can
cause adjacent scoreboard entries to blame the same commit. Currently
we only look at the present entry when determining whether a line needs
to be colored for --color-lines. Check the previous entry as well.
Reported-by: Seth McDonald <sethmcmail@pm.me> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
HodaSalim [Mon, 2 Feb 2026 16:18:00 +0000 (18:18 +0200)]
t9160:modernize test path checking
Replace old-style path checks with Git's dedicated test helpers:
- test -f → test_path_is_file
- test -d → test_path_is_dir
- test -s → test_file_not_empty
Fix typos with the word "subsequent"
Found using: git grep "test -[efd]" t/
This improves test readability and provides better error messages
when path checks fail.
Signed-off-by: HodaSalim <hoda.s.salim@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
.github/CONTRIBUTING.md: link to SubmittingPatches on git-scm.com
The relative link to SubmittingPatches is broken when viewed through
GitHub's specialized "Contributing" tab. Update the link to point to
the documentation on git-scm.com to be consistent with other links in
the same file. Also, wrap the line to improve readability.
Signed-off-by: Abdalrhman Mohamed <Eng.Abdalrhman.Abdalmonem@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Sat, 31 Jan 2026 13:32:54 +0000 (21:32 +0800)]
Merge branch 'jx/zh_CN' of github.com:jiangxin/git
* 'jx/zh_CN' of github.com:jiangxin/git:
l10n: zh_CN: standardize glossary terms
l10n: zh_CN: updated translation for 2.53
l10n: zh_CN: fix inconsistent use of standard vs. wide colons
projects / thirdparty / git.git / log
