Han Xin [Tue, 12 Jul 2022 08:01:43 +0000 (16:01 +0800)]
t5330: remove run_with_limited_processses()
run_with_limited_processses() is used to end the loop faster when an
infinite loop happen. But "ulimit" is tied to the entire development
station, and the test will fail due to too many other processes or using
"--stress".
Without run_with_limited_processses() the infinite loop can also be
stopped due to global configrations or quotas, and the verification
still works fine. So let's remove run_with_limited_processses().
Signed-off-by: Han Xin <hanxin.hx@bytedance.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 12 Jul 2022 07:03:45 +0000 (03:03 -0400)]
diff-files: move misplaced cleanup label
Commit 0139c58ab9 (revisions API users: add "goto cleanup" for
release_revisions(), 2022-04-13) converted an early return in
cmd_diff_files() into a goto. But it put the cleanup label too early: if
read_cache_preload() returns an error, we'll set result to "-1", but
then jump to calling run_diff_files(), overwriting our result.
We should jump past the call to run_diff_files(). Likewise, we should go
past diff_result_code(), which is expecting to see a code from an actual
diff, not a negative error code.
In practice, I suspect this bug cannot actually be triggered, because
read_cache_preload() does not seem to ever return an error. Its return
value (eventually) comes from do_read_index(), which gives the number of
cache entries found, and calls die() on error. Still, it makes sense to
fix the inadvertent change from 0139c58ab9 first, and we can look into
the overall error handling of read_cache() separately (which is present
in many other callsites).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 11 Jul 2022 23:25:14 +0000 (16:25 -0700)]
fsck: do not dereference NULL while checking resolve-undo data
When we found an invalid object recorded in the resolve-undo data,
we would have ended up dereferencing NULL while fsck. Reporting the
problem and going on to the next object is the right thing to do
here.
Junio C Hamano [Mon, 11 Jul 2022 22:38:51 +0000 (15:38 -0700)]
Merge branch 'rs/archive-with-internal-gzip'
Teach "git archive" to (optionally and then by default) avoid
spawning an external "gzip" process when creating ".tar.gz" (and
".tgz") archives.
* rs/archive-with-internal-gzip:
archive-tar: use internal gzip by default
archive-tar: use OS_CODE 3 (Unix) for internal gzip
archive-tar: add internal gzip implementation
archive-tar: factor out write_block()
archive: rename archiver data field to filter_command
archive: update format documentation
Junio C Hamano [Mon, 11 Jul 2022 22:38:51 +0000 (15:38 -0700)]
Merge branch 'ds/branch-checked-out'
Introduce a helper to see if a branch is already being worked on
(hence should not be newly checked out in a working tree), which
performs much better than the existing find_shared_symref() to
replace many uses of the latter.
* ds/branch-checked-out:
branch: drop unused worktrees variable
fetch: stop passing around unused worktrees variable
branch: fix branch_checked_out() leaks
branch: use branch_checked_out() when deleting refs
fetch: use new branch_checked_out() and add tests
branch: check for bisects and rebases
branch: add branch_checked_out() helper
Junio C Hamano [Mon, 11 Jul 2022 22:38:50 +0000 (15:38 -0700)]
Merge branch 'ac/bitmap-format-doc'
Adjust technical/bitmap-format to be formatted by AsciiDoc, and
add some missing information to the documentation.
* ac/bitmap-format-doc:
bitmap-format.txt: add information for trailing checksum
bitmap-format.txt: fix some formatting issues
bitmap-format.txt: feed the file to asciidoc to generate html
Junio C Hamano [Mon, 11 Jul 2022 22:38:49 +0000 (15:38 -0700)]
Merge branch 'pb/diff-doc-raw-format'
Update "git diff/log --raw" format documentation.
* pb/diff-doc-raw-format:
diff-index.txt: update raw output format in examples
diff-format.txt: correct misleading wording
diff-format.txt: dst can be 0* SHA-1 when path is deleted, too
Jeff King [Mon, 11 Jul 2022 14:48:06 +0000 (10:48 -0400)]
ref-filter: disable save_commit_buffer while traversing
Various ref-filter options like "--contains" or "--merged" may cause us
to traverse large segments of the history graph. It's counter-productive
to have save_commit_buffer turned on, as that will instruct the commit
code to cache in-memory the object contents for each commit we traverse.
This increases the amount of heap memory used while providing little or
no benefit, since we're not actually planning to display those commits
(which is the usual reason that tools like git-log want to keep them
around). We can easily disable this feature while ref-filter is running.
This lowers peak heap (as measured by massif) for running:
in linux.git from ~100MB to ~20MB. It also seems to improve runtime by
4-5% (600ms vs 630ms).
A few points to note:
- it should be safe to temporarily disable save_commit_buffer like
this. The saved buffers are accessed through get_commit_buffer(),
which treats the saved ones like a cache, and loads on-demand from
the object database on a cache miss. So any code that was using this
would not be wrong, it might just incur an extra object lookup for
some objects. But...
- I don't think any ref-filter related code is using the cache. While
it's true that an option like "--format=%(*contents:subject)" or
"--sort=*authordate" will need to look at the commit contents,
ref-filter doesn't use get_commit_buffer() to do so! It always reads
the objects directly via read_object_file(), though it does avoid
re-reading objects if the format can be satisfied without them.
Timing "git tag --format=%(*authordate)" shows that we're the same
before and after, as expected.
- Note that all of this assumes you don't have a commit-graph file. if
you do, then the heap usage is even lower, and the runtime is 10x
faster. So in that sense this is not urgent, as there's a much
better solution. But since it's such an obvious and easy win for
fallback cases (including commits which aren't yet in the graph
file), there's no reason not to.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 11 Jul 2022 09:21:52 +0000 (05:21 -0400)]
clone: move unborn head creation to update_head()
Prior to 4f37d45706 (clone: respect remote unborn HEAD, 2021-02-05),
creation of the local HEAD was always done in update_head(). That commit
added code to handle an unborn head in an empty repository, and just did
all symref creation and config setup there.
This makes the code flow a little bit confusing, especially as new
corner cases have been covered (like the previous commit to match our
default branch name to a non-HEAD remote branch).
Let's move the creation of the unborn symref into update_head(). This
matches the other HEAD-creation cases, and now the logic is consistently
separated: the main cmd_clone() function only examines the situation and
sets variables based on what it finds, and update_head() actually
performs the update.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Li Linchao [Mon, 11 Jul 2022 05:58:54 +0000 (05:58 +0000)]
remote-curl: send Accept-Language header to server
Git server end's ability to accept Accept-Language header was introduced
in f18604bbf2 (http: add Accept-Language header if possible, 2015-01-28),
but this is only used by very early phase of the transfer, which is HTTP
GET request to discover references. For other phases, like POST request
in the smart HTTP, the server does not know what language the client
speaks.
Teach git client to learn end-user's preferred language and throw
accept-language header to the server side. Once the server gets this header,
it has the ability to talk to end-user with language they understand.
This would be very helpful for many non-English speakers.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Li Linchao <lilinchao@oschina.cn> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jaydeep Das [Mon, 11 Jul 2022 05:00:50 +0000 (05:00 +0000)]
gpg-interface: add function for converting trust level to string
Add new helper function `gpg_trust_level_to_str()` which will
convert a given member of `enum signature_trust_level` to its
corresponding string (in lowercase). For example, `TRUST_ULTIMATE`
will yield the string "ultimate".
This will abstract out some code in `pretty.c` relating to gpg
signature trust levels.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Hariom Verma <hariom18599@gmail.com> Signed-off-by: Jaydeep Das <jaydeepjd.8914@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 10 Jul 2022 15:16:45 +0000 (17:16 +0200)]
multi-pack-index: simplify handling of unknown --options
Although parse_options() can handle unknown --options just fine, none
of 'git multi-pack-index's subcommands rely on it, but do it on their
own: they invoke parse_options() with the PARSE_OPT_KEEP_UNKNOWN flag,
then check whether there are any unparsed arguments left, and print
usage and quit if necessary.
Drop that PARSE_OPT_KEEP_UNKNOWN flag to let parse_options() handle
unknown options instead, which has the additional benefit that it
prints not only the usage but an "error: unknown option `foo'" message
as well.
Do leave the unparsed arguments check to catch any unexpected
non-option arguments, though, e.g. 'git multi-pack-index write foo'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 10 Jul 2022 10:05:51 +0000 (12:05 +0200)]
cocci: avoid normalization rules for memcpy
Some of the rules for using COPY_ARRAY instead of memcpy with sizeof are
intended to reduce the number of sizeof variants to deal with. They can
have unintended side effects if only they match, but not the one for the
COPY_ARRAY conversion at the end.
Avoid these side effects by instead using a self-contained rule for each
combination of array and pointer for source and destination which lists
all sizeof variants inline.
This lets "make contrib/coccinelle/array.cocci.patch" take 15% longer on
my machine, but gives peace of mind that no incomplete transformation
will be generated.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Sun, 10 Jul 2022 13:29:07 +0000 (13:29 +0000)]
sha256: add support for Nettle
For SHA-256, we currently have support for OpenSSL and libgcrypt because
these two libraries contain optimized implementations that can take
advantage of native processor instructions. However, OpenSSL is not
suitable for linking against for Linux distros due to licensing
incompatibilities with the GPLv2, and libgcrypt has been less favored by
cryptographers due to some security-related implementation issues,
which, while not affecting our use of hash algorithms, has affected its
reputation.
Let's add another option that's compatible with the GPLv2, which is
Nettle. This is an option which is generally better than libgcrypt
because on many distros GnuTLS (which uses Nettle) is used for HTTPS and
therefore as a practical matter it will be available on most systems.
As a result, prefer it over libgcrypt and our built-in implementation.
Nettle also has recently gained support for Intel's SHA-NI instructions,
which compare very favorably to other implementations, as well as
assembly implementations for when SHA-NI is not available.
A git gc on git.git sees a 12% performance improvement with Nettle over
our block SHA-256 implementation due to general assembly improvements.
With SHA-NI, the performance of raw SHA-256 on a 2 GiB file goes from
7.296 seconds with block SHA-256 to 1.523 seconds with Nettle.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 10 Jul 2022 01:33:54 +0000 (18:33 -0700)]
builtin/mv.c: use the MOVE_ARRAY() macro instead of memmove()
The variables 'source', 'destination', and 'submodule_gitfile' are
all of type "const char **", and an element of such an array is of
"type const char *", but these memmove() calls were written as if
these variables are of type "char **".
Once these memmove() calls are fixed to use the correct type to
compute the number of bytes to be moved, e.g.
- memmove(source + i, source + i + 1, n * sizeof(char *));
+ memmove(source + i, source + i + 1, n * sizeof(const char *));
existing contrib/coccinelle/array.cocci rules can recognize them as
candidates for turning into MOVE_ARRAY().
While at it, use CALLOC_ARRAY() instead of xcalloc() to allocate the
modes[] array that is involved in the change.
Fernando Ramos [Fri, 8 Jul 2022 18:10:24 +0000 (20:10 +0200)]
vimdiff: make layout engine more robust against user vim settings
'vim' has two configuration options ('splitbelow' and 'splitright') that
change the way the 'split' command behaves. When they are set, the
commands that the layout engine generates no longer work as expected.
In order to fix this we can append special keyword 'leftabove' to each
'split' and 'vertical split' subcommand found inside the command string
generated by the layout engine.
This works because whatever comes after 'leftabove' will temporally
ignore settings 'splitbelow' and 'splitright'.
Reported-by: Matthew Klein <mklein994@gmail.com> Signed-off-by: Fernando Ramos <greenfoo@u92.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper to grow an array. This is analogous to ALLOC_GROW() in
the rest of the codebase but returns −1 on allocation failure to
accommodate other users of libxdiff such as libgit2. It will also
return a error if the multiplication overflows while calculating the
new allocation size. Note that this keeps doubling on reallocation
like the code it is replacing rather than increasing the existing size
by half like ALLOC_GROW(). It does however copy ALLOC_GROW()'s trick
of adding a small amount to the new allocation to avoid a lot of
reallocations at small sizes.
Note that xdl_alloc_grow_helper() uses long rather than size_t for
`nr` and `alloc` to match the existing code.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper for allocating an array and initialize the elements to
zero. This is analogous to CALLOC_ARRAY() in the rest of the codebase
but it returns NULL on allocation failures rather than dying to
accommodate other users of libxdiff such as libgit2.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for introducing XDL_CALLOC_ARRAY() use calloc() to
obtain zeroed out memory rather than malloc() followed by memset(). To
try and keep the lines a reasonable length this commit also stops
casting the pointer returned by calloc() as this is unnecessary.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper to allocate an array that automatically calculates the
allocation size. This is analogous to ALLOC_ARRAY() in the rest of the
codebase but returns NULL if the allocation fails to accommodate other
users of libxdiff such as libgit2. The helper will also return NULL if
the multiplication in the allocation calculation overflows.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Perforce client name can contain arbitrary characters
which do not decode to UTF-8. Use the fallback strategy
implemented in metadata_stream_to_writable_bytes() also
for the client name.
Signed-off-by: Kilian Kilger <kkilger@gmail.com> Reviewed-by: Tao Klerks <tao@klerks.biz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 7 Jul 2022 23:59:35 +0000 (19:59 -0400)]
clone: use remote branch if it matches default HEAD
Usually clone tries to use the same local HEAD as the remote (unless the
user has given --branch explicitly). Even if the remote HEAD is detached
or unborn, we can detect those situations with modern versions of Git.
If the remote is too old to support the "unborn" extension (or it has
been disabled via config), then we can't know the name of the remote's
unborn HEAD, and we fall back whatever the local default branch name is
configured to be.
But that leads to one weird corner case. It's rare because it needs a
number of factors:
- the remote has an unborn HEAD
- the remote is too old to support "unborn", or has disabled it
- the remote has another branch "foo"
- the local default branch name is "foo"
In that case you end up with a local clone on an unborn "foo" branch,
disconnected completely from the remote's "foo". This is rare in
practice, but the result is quite confusing.
When choosing "foo", we can double check whether the remote has such a
name, and if so, start our local "foo" at the same spot, rather than
making it unborn.
Note that this causes a test failure in t5605, which is cloning from a
bundle that doesn't contain HEAD (so it behaves like a remote that
doesn't support "unborn"), but has a single "main" branch. That test
expects that we end up in the weird "unborn main" case, where we don't
actually check out the remote branch of the same name. Even though we
have to update the test, this seems like an argument in favor of this
patch: checking out main is what I'd expect from such a bundle.
So this patch updates the test for the new behavior and adds an adjacent
one that checks what the original was going for: if there's no HEAD and
the bundle _doesn't_ have a branch that matches our local default name,
then we end up with nothing checked out.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 7 Jul 2022 23:57:45 +0000 (19:57 -0400)]
clone: propagate empty remote HEAD even with other branches
Unless "--branch" was given, clone generally tries to match the local
HEAD to the remote one. For most repositories, this is easy: the remote
tells us which branch HEAD was pointing to, and we call our local
checkout() function on that branch.
When cloning an empty repository, it's a little more tricky: we have
special code that checks the transport's "unborn" extension, or falls back
to our local idea of what the default branch should be. In either case,
we point the new HEAD to that, and set up the branch.* config.
But that leaves one case unhandled: when the remote repository _isn't_
empty, but its HEAD is unborn. The checkout() function is smart enough
to realize we didn't fetch the remote HEAD and it bails with a warning.
But we'll have ignored any information the remote gave us via the unborn
extension. This leads to nonsense outcomes:
- If the remote has its HEAD pointing to an unborn "foo" and contains
another branch "bar", cloning will get branch "bar" but leave the
local HEAD pointing at "master" (or whatever our local default is),
which is useless. The project does not use "master" as a branch.
- Worse, if the other branch "bar" is instead called "master" (but
again, the remote HEAD is not pointing to it), then we end up with a
local unborn branch "master", which is not connected to the remote
"master" (it shares no history, and there's no branch.* config).
Instead, we should try to use the remote's HEAD, even if its unborn, to
be consistent with the other cases.
The reason this case was missed is that cmd_clone() handles empty and
non-empty repositories on two different sides of a conditional:
if (we have any refs) {
fetch refs;
check for --branch;
otherwise, try to point our head at remote head;
otherwise, our head is NULL;
} else {
check for --branch;
otherwise, try to use "unborn" extension;
otherwise, fall back to our default name name;
}
So the smallest change would be to repeat the "unborn" logic at the end
of the first block. But we can note some other overlaps and
inconsistencies:
- both sides have to handle --branch (though note that it's always an
error for the empty repo case, since an empty repo by definition
does not have a matching branch)
- the fall back to the default name is much more explicit in the
empty-repo case. The non-empty case eventually ends up bailing
from checkout() with a warning, which produces a similar result, but
fails to set up the branch config we do in the empty case.
So let's pull the HEAD setup out of this conditional entirely. This
de-duplicates some of the code and the result is easy to follow, because
helper functions like find_ref_by_name() do the right thing even in the
empty-repo case (i.e., by returning NULL).
There are two subtleties:
- for a remote with a detached HEAD, it will advertise an oid for HEAD
(which we store in our "remote_head" variable), but we won't find a
matching refname (so our "remote_head_points_at" is NULL). In this
case we make a local detached HEAD to match. Right now this happens
implicitly by reaching update_head() with a non-NULL remote_head
(since we skip all of the unborn-fallback). We'll now need to
account for it explicitly before doing the fallback.
- for an empty repo, we issue a warning to the user that they've
cloned an empty repo. The text of that warning doesn't make sense
for a non-empty repo with an unborn HEAD, so we'll have to
differentiate the two cases there. We could just use different text,
but instead let's allow the code to continue down to checkout(),
which will issue an appropriate warning, like:
remote HEAD refers to nonexistent ref, unable to checkout
Continuing down to checkout() will make it easier to do more fixes
on top (see below).
Note that this patch fixes the case where the other side reports an
unborn head to us using the protocol extension. It _doesn't_ fix the
case where the other side doesn't tell us, we locally guess "master",
and the other side happens to have a "master" which its HEAD doesn't
point. But it doesn't make anything worse there, and it should actually
make it easier to fix that problem on top.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 7 Jul 2022 23:54:51 +0000 (19:54 -0400)]
clone: drop extra newline from warning message
We don't need to put a "\n" in calls to warning(), since it adds one
itself (and the user sees an extra blank line). Drop it, and while we're
here, drop the full-stop from the message, which goes against our
guidelines.
This bug dates all the way back to 8434c2f1af (Build in clone,
2008-04-27), but presumably nobody noticed because it's hard to trigger:
you have to clone a repository whose HEAD is unborn, but which is not
otherwise empty.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cocci: generalize "unused" rule to cover more than "strbuf"
Generalize the newly added "unused.cocci" rule to find more than just
"struct strbuf", let's have it find the same unused patterns for
"struct string_list", as well as other code that uses
similar-looking *_{release,clear,free}() and {release,clear,free}_*()
functions.
We're intentionally loose in accepting e.g. a "strbuf_init(&sb)"
followed by a "string_list_clear(&sb, 0)". It's assumed that the
compiler will catch any such invalid code, i.e. that our
constructors/destructors don't take a "void *".
See [1] for example of code that would be covered by the
"get_worktrees()" part of this rule. We'd still need work that the
series is based on (we were passing "worktrees" to a function), but
could now do the change in [1] automatically.
cocci: add and apply a rule to find "unused" strbufs
Add a coccinelle rule to remove "struct strbuf" initialization
followed by calling "strbuf_release()" function, without any uses of
the strbuf in the same function.
See the tests in contrib/coccinelle/tests/unused.{c,res} for what it's
intended to find and replace.
The inclusion of "contrib/scalar/scalar.c" is because "spatch" was
manually run on it (we don't usually run spatch on contrib).
Per the "buggy code" comment we also match a strbuf_init() before the
xmalloc(), but we're not seeking to be so strict as to make checks
that the compiler will catch for us redundant. Saying we'll match
either "init" or "xmalloc" lines makes the rule simpler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cocci: have "coccicheck{,-pending}" depend on "coccicheck-test"
Have the newly introduced "coccicheck-test" target run implicitly when
"coccicheck" itself is run. As with e.g. the "check-chainlint"
target (see [1]) it makes sense to run this unconditionally before we
run other "spatch" rules as a basic sanity check. See
1. 803394459d4 (t/Makefile: add machinery to check correctness of
chainlint.sed, 2018-07-11)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cocci: add a "coccicheck-test" target and test *.cocci rules
Add a "coccicheck-test" target to test our *.cocci rules, and as a
demonstration add tests for the rules added in 39ea59a2570 (remove
unnecessary NULL check before free(3), 2016-10-08) and 1b83d1251ed (coccinelle: add a rule to make "expression" code use
FREE_AND_NULL(), 2017-06-15).
I considered making use of the "spatch --test" option, and the choice
of a "tests" over a "t" directory is to make these tests compatible
with such a future change.
Unfortunately "spatch --test" doesn't return meaningful exit codes,
AFAICT you need to "grep" its output to see if the *.res is what you
expect. There's "--test-okfailed", but I didn't find a way to sensibly
integrate those (it relies on some in-between status files, but
doesn't help with the status codes).
Instead let's use a "--sp-file" pattern similar to the main
"coccicheck" rule, with the difference that we use and compare the
two *.res files with cmp(1).
The --very-quiet and --no-show-diff options ensure that we don't need
to pipe stdout and stderr somewhere. Unlike the "%.cocci.patch" rule
we're not using the diff.
The "cmp || git diff" is optimistically giving us better output on
failure, but even if we only have POSIX cmp and no system git
installed we'll still fail with the "cmp", just with an error message
that isn't as friendly. The "2>/dev/null" is in case we don't have a
"git" installed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile & .gitignore: ignore & clean "git.res", not "*.res"
Adjust the overly broad .gitignore and "make clean" rule added in ce39c2e04ce (Provide a Windows version resource for the git
executables., 2012-05-24).
For now this is merely a correctness fix, but needed because a
subsequent commit will want to check in *.res files elsewhere in the
tree, which we shouldn't have to "git add -f".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: remove mandatory "spatch" arguments from SPATCH_FLAGS
The "--patch ." part of SPATCH_FLAGS added in f57d11728d1 (coccinelle:
put sane filenames into output patches, 2018-07-23) should have been
added unconditionally to the "spatch" invocation instead, using it
isn't optional.
Let's also move the other mandatory flag to come after
$(SPATCH_FLAGS), to ensure that our "--sp-file" overrides any provided
in the environment, both --sp-file <arg> and --patch <arg> are
last-option-wins as far as spatch(1) option parsing is concerned.
The environment variable override was initially added in a9a884aea57 (coccicheck: use --all-includes by default,
2016-09-30). In practice there's probably nobody that's using
SPATCH_FLAGS to try to intentionally break our invocations, but since
we're changing this let's make it clear what (if anything) we expect
to be overridden by user-supplied flags.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort: fix issue with dual rename and add/add conflict
There is code in both merge-recursive and merge-ort for avoiding doubly
transitive renames (i.e. one side renames directory A/ -> B/, and the
other side renames directory B/ -> C/), because this combination would
otherwise make a mess for new files added to A/ on the first side and
wondering which directory they end up in -- especially if there were
even more renames such as the first side renaming C/ -> D/. In such
cases, it just turns "off" directory rename detection for the higher
order transitive cases.
The testcases added in t6423 a couple commits ago are slightly different
but similar in principle. They involve a similar case of paired
renaming but instead of A/ -> B/ and B/ -> C/, the second side renames
a leading directory of B/ to C/. And both sides add a new file
somewhere under the directory that the other side will rename. While
the new files added start within different directories and thus could
logically end up within different directories, it is weird for a file
on one side to end up where the other one started and not move along
with it. So, let's just turn off directory rename detection in this
case as well.
Another way to look at this is that if the source name involved in a
directory rename on one side is the target name of a directory rename
operation for a file from the other side, then we avoid the doubly
transitive rename. (More concretely, if a directory rename on side D
wants to rename a file on side E from OLD_NAME -> NEW_NAME, and side D
already had a file named NEW_NAME, and a directory rename on side E
wants to rename side D's NEW_NAME -> NEWER_NAME, then we turn off the
directory rename detection for NEW_NAME to prevent the
NEW_NAME -> NEWER_NAME rename, and instead end up with an add/add
conflict on NEW_NAME.)
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort: shuffle the computation and cleanup of potential collisions
Run compute_collisions() for renames on both sides of history before
any calls to collect_renames(), and do not free the computed collisions
until after both calls to collect_renames(). This is just a code
reorganization at this point that doesn't make sense on its own, but
will permit us to use the computed collision info from both sides
within each call to collect_renames() in a subsequent commit.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6423: add tests of dual directory rename plus add/add conflict
This is an attempt at minimalizing a testcase reported by Glen Choo
with tensorflow where merge-ort would report an assertion failure:
Assertion failed: (ci->filemask == 2 || ci->filemask == 4), function apply_directory_rename_modifications, file merge-ort.c, line 2410
reversing the direction of the merge provides a different error:
error: cache entry has null sha1: ...
fatal: unable to write .git/index
so we add testcases for both. With these new testcases, the
recursive strategy differs in that it returns the latter error for
both merge directions.
These testcases are somehow a little different than Glen's original
tensorflow testcase in that these ones trigger a bug with the recursive
algorithm whereas his testcase didn't. I figure that means these
testcases somehow manage to be more comprehensive.
Reported-by: Glen Choo <chooglen@google.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 4 Jul 2022 20:40:31 +0000 (13:40 -0700)]
Merge 'js/add-i-delete' into maint-2.37
Rewrite of "git add -i" in C that appeared in Git 2.25 didn't
correctly record a removed file to the index, which is an old
regression but has become widely known because the C version
has become the default in the latest release.
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:37 +0000 (10:37 +0800)]
mv: add check_dir_in_index() and solve general dir check issue
Originally, moving a <source> directory which is not on-disk due
to its existence outside of sparse-checkout cone, "giv mv" command
errors out with "bad source".
Add a helper check_dir_in_index() function to see if a directory
name exists in the index. Also add a SKIP_WORKTREE_DIR bit to mark
such directories.
Change the checking logic, so that such <source> directory makes
"giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Helped-by: Victoria Dye <vdye@github.com> Helped-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:36 +0000 (10:37 +0800)]
mv: use flags mode for update_mode
As suggested by Derrick [1], move the in-line definition of
"enum update_mode" to the top of the file and make it use "flags"
mode (each state is a different bit in the word).
Change the flag assignments from '=' (single assignment) to '|='
(additive). Also change flag evaluation from '==' to '&', etc.
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:35 +0000 (10:37 +0800)]
mv: check if <destination> exists in index to handle overwriting
Originally, moving a sparse file into cone can result in unwarned
overwrite of existing entry. The expected behavior is that if the
<destination> exists in the entry, user should be prompted to supply
a [-f|--force] to carry out the operation, or the operation should
fail.
Add a check mechanism to do that.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:34 +0000 (10:37 +0800)]
mv: check if out-of-cone file exists in index with SKIP_WORKTREE bit
Originally, moving a <source> file which is not on-disk but exists in
index as a SKIP_WORKTREE enabled cache entry, "giv mv" command errors
out with "bad source".
Change the checking logic, so that such <source>
file makes "giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:32 +0000 (10:37 +0800)]
mv: update sparsity after moving from out-of-cone to in-cone
Originally, "git mv" a sparse file from out-of-cone to
in-cone does not update the moved file's sparsity (remove its
SKIP_WORKTREE bit). And the corresponding cache entry is, unexpectedly,
not checked out in the working tree.
Update the behavior so that:
1. Moving from out-of-cone to in-cone removes the SKIP_WORKTREE bit from
corresponding cache entry.
2. The moved cache entry is checked out in the working tree to reflect
the updated sparsity.
Helped-by: Victoria Dye <vdye@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:31 +0000 (10:37 +0800)]
t1092: mv directory from out-of-cone to in-cone
Add test for "mv: add check_dir_in_index() and solve general dir check
issue" in this series.
This change tests the following:
1. mv <source> as a directory on the sparse index boundary (where it
would be a sparse directory in a sparse index).
2. mv <source> as a directory which is deeper than the boundary (so
the sparse index would expand in the cache_name_pos() method).
These tests can be written now for correctness, but later the first case
can be updated to use the 'ensure_not_expanded' helper in t1092.
Suggested-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:30 +0000 (10:37 +0800)]
t7002: add tests for moving out-of-cone file/directory
Add corresponding tests to test following situations:
We do not have sufficient coverage of moving files outside
of a sparse-checkout cone. Create new tests covering this
behavior, keeping in mind that the user can include --sparse
(or not), move a file or directory, and the destination can
already exist in the index (in this case user can use --force
to overwrite existing entry).
Helped-by: Victoria Dye <vdye@github.com> Helped-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in a310d434946 ([PATCH] Deltification
library work by Nicolas Pitre., 2005-05-19), as a result we can mark
another test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in fa099d23227 (worktree.c: kill
parse_ref() in favor of refs_resolve_ref_unsafe(), 2017-04-24), as a
result we can mark another test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks introduced with these tests in f1294eaf7fb (bloom.c:
introduce core Bloom filter constructs, 2020-03-30), as a result we
can mark almost the entirety of t0095-bloom.sh as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true", there's still an
unrelated memory leak in "git commit" in one of the tests, let's skip
that one under SANITIZE_LEAK for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks introduced with these tests in 75459410edd (json_writer: new routines to create JSON data,
2018-07-13), as a result we can mark a test as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks in "test-tool regex" which have been there since c91841594c2 (test-regex: Add a test to check for a bug in the regex
routines, 2012-09-01), as a result we can mark a test as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
We could regfree() on the die() paths here, which would make some
invocations of valgrind(1) happy, but let's just target SANITIZE=leak
for now. Variables that are still reachable when we die() are not
reported as leaks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-tool urlmatch-normalization: fix a memory leak
Fix a memory leak in "test-tool urlmatch-normalization", as a result
we can mark the corresponding test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks in two test-tools used by t0090-cache-tree.sh. As a
result we can mark the test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "test-tool path-utils", as a result we can mark
the corresponding test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "test-tool test-hash" which has been there since b57cbbf8a86 (test-sha1: test hashing large buffer, 2006-06-24), as a
result we can mark more tests as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 44c175c7a46 (pull: error on no merge
candidates, 2015-06-18). As a result we can mark several tests as
passing with SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
Removing the "int ret = 0" assignment added here in a6d7eb2c7a6 (pull:
optionally rebase submodules (remote submodule changes only),
2017-06-23) is not a logic error, it could always have been left
uninitialized (as "int ret"), now that we'll use the "ret" from the
upper scope we can drop the assignment in the "opt_rebase" branch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cat-file: fix a common "struct object_context" memory leak
Fix a memory leak where "cat-file" will leak the "path" member. See e5fba602e59 (textconv: support for cat_file, 2010-06-15) for the code
that introduced the offending get_oid_with_context() call (called
get_sha1_with_context() at the time).
As a result we can mark several tests as passing with SANITIZE=leak
using "TEST_PASSES_SANITIZE_LEAK=true".
As noted in dc944b65f1d (get_sha1_with_context: dynamically allocate
oc->path, 2017-05-19) callers must free the "path" member. That same
commit added the relevant free() to this function, but we weren't
catching cases where we'd return early.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in code added in 41abfe15d95 (maintenance: add
pack-refs task, 2021-02-09), we need to call strvec_clear() on the
"struct strvec" that we initialized.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1c41d2805e4 (unpack_trees_options: free messages when done,
2018-05-21) we started calling clear_unpack_trees_porcelain() on this
codepath, but missed this error path.
We could call clear_unpack_trees_porcelain() just before we error()
and return when unmerged_cache() fails, but the more correct fix is to
not have the unmerged_cache() check happen in the middle of our
"topts" setup.
Before 23cbf11b5c0 (merge-recursive: porcelain messages for checkout,
2010-08-11) we would not malloc() to setup our "topts", which is when
this started to leak on the error path.
Before that this code wasn't conflating the setup of "topts" and the
unmerged_cache() call in any meaningful way. The initial version in 782c2d65c24 (Build in checkout, 2008-02-07) just does a "memset" of
it, and initializes a single struct member.
Then in 8ccba008ee3 (unpack-trees: allow Porcelain to give different
error messages, 2008-05-17) we added the initialization of the error
message, which as noted above finally started leaking in 23cbf11b5c0.
Let's fix the memory leak, and avoid future issues by initializing the
"topts" with a helper function. There are no functional changes here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "merge-file", we need to loop over the "mmfs"
array and free() what we've got so far when we error out. As a result
we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-file: refactor for subsequent memory leak fix
Refactor the code in builtin/merge-file.c to:
* Use the initializer to zero out "mmfs", and use modern C syntax for
the rest.
* Refactor the the inner loop to use a variable and "if/else if"
pattern followed by "return". This will make a change to change it to
a "goto cleanup" pattern smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cat-file: fix a memory leak in --batch-command mode
Fix a memory leak introduced in 440c705ea63 (cat-file: add
--batch-command mode, 2022-02-18). The free_cmds() function was only
called on "queued_nr" if we had a "flush" command. As the "without
flush for blob info" test added in the same commit shows we can't rely
on that, so let's call free_cmds() again at the end.
Since "nr" follows the usual pattern of being set to 0 if we've
free()'d the memory already it's OK to call it twice, even in cases
where we are doing a "flush".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call the release_revisions() function added in 1878b5edc03 (revision.[ch]: provide and start using a
release_revisions(), 2022-04-13) in cmd_revert(), as well as freeing
the xmalloc()'d "revs" member itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in code added in bf0231c6614 (rev-parse: add
--show-superproject-working-tree, 2017-03-08), we should never have
made the result of xgetcwd() a "const char *", as we return a
strbuf_detach()'d value. Let's fix that and free() it when we're done
with it.
We can't mark any tests passing passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true" as a result of this change, but
e.g. "t/t1500-rev-parse.sh" now gets closer to passing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak added in 0ec4b1650cc (clone: fix ref selection in
--single-branch --branch=xxx, 2012-06-22).
Whether we get our "remote_head" from copy_ref() directly, or with a
call to guess_remote_head() it'll be the result of a copy_ref() in
either case, as guess_remote_head() is a wrapper for copy_ref() (or it
returns NULL).
We can't mark any tests passing passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true" as a result of this change, but
e.g. "t/t1500-rev-parse.sh" now gets closer to passing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "git check-ref-format" that's been present in the
code in one form or another since 38eedc634bc (git check-ref-format
--print, 2009-10-12), the code got substantially refactored in cfbe22f03f9 (check-ref-format: handle subcommands in separate
functions, 2010-08-05).
As a result we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test worked despite the error, because even though
test_file_is_empty is a non-existent function, the '!' negated the
return value and made it pass. It'd be better to avoid the negation,
so something like
test_file_not_empty actual
would be better, but perhaps it makes even more sense to specify the
number of lines of expected output to make the test a bit tighter.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Elijah Newren <newren@palantir.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Han Xin [Fri, 1 Jul 2022 01:34:30 +0000 (09:34 +0800)]
commit-graph.c: no lazy fetch in lookup_commit_in_graph()
The commit-graph is used to opportunistically optimize accesses to
certain pieces of information on commit objects, and
lookup_commit_in_graph() tries to say "no" when the requested commit
does not locally exist by returning NULL, in which case the caller
can ask for (which may result in on-demand fetching from a promisor
remote) and parse the commit object itself.
However, it uses a wrong helper, repo_has_object_file(), to do so.
This helper not only checks if an object is mmediately available in
the local object store, but also tries to fetch from a promisor remote.
But the fetch machinery calls lookup_commit_in_graph(), thus causing an
infinite loop.
We should make lookup_commit_in_graph() expect that a commit given to it
can be legitimately missing from the local object store, by using the
has_object_file() helper instead.
Signed-off-by: Han Xin <hanxin.hx@bytedance.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
All invocations of do_get_submodule_displaypath() pass
get_super_prefix() as the super_prefix arg, which is exactly the same
as get_submodule_displaypath().
Replace all calls to do_get_submodule_displaypath() with
get_submodule_displaypath(), and since it has no more callers, remove
it.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike the other subcommands, "git submodule--helper update" uses the
"--recursive-prefix" flag instead of "--super-prefix". The two flags are
otherwise identical (they only serve to compute the 'display path' of a
submodule), except that there is a dedicated helper function to get the
value of "--super-prefix".
This inconsistency exists because "git submodule update" used to pass
"--recursive-prefix" between shell and C (introduced in [1]) before
"--super-prefix" was introduced (in [2]), and for simplicity, we kept
this name when "git submodule--helper update" was created.
Remove "--recursive-prefix" and its associated code from "git
submodule--helper update", replacing it with "--super-prefix".
To use "--super-prefix", module_update is marked with
SUPPORT_SUPER_PREFIX. Note that module_clone must also be marked with
SUPPORT_SUPER_PREFIX, otherwise the "git submodule--helper clone"
subprocess will fail check because "--super-prefix" is propagated via
the environment.
[1] 48308681b0 (git submodule update: have a dedicated helper for
cloning, 2016-02-29)
[2] 74866d7579 (git: make super-prefix option, 2016-10-07)
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the SUPPORT_SUPER_PREFIX flag from "add", "init" and
"summary". For the "add" command it hasn't been used since [1],
likewise for "init" and "summary" since [2] and [3], respectively.
As implemented in 74866d75793 (git: make super-prefix option,
2016-10-07) the SUPPORT_SUPER_PREFIX flag in git.c applies for the
entire command, but as implemented in 89c86265576 (submodule helper:
support super prefix, 2016-12-08) we assert here in
cmd_submodule__helper() that we're not getting the flag unexpectedly.
submodule--helper: use correct display path helper
Replace a chunk of code in update_submodule() with an equivalent
do_get_submodule_displaypath() invocation. This is already tested by
t/t7406-submodule-update.sh:'submodule update --init --recursive from
subdirectory', so no tests are added.
The two are equivalent because:
- Exactly one of recursive_prefix|prefix is non-NULL at a time; prefix
is set at the superproject level, and recursive_prefix is set when
recursing into submodules. There is also a BUG() statement in
get_submodule_displaypath() that asserts that both cannot be non-NULL.
- In get_submodule_displaypath(), get_super_prefix() always returns NULL
because "--super-prefix" is never passed. Thus calling it is
equivalent to calling do_get_submodule_displaypath() with super_prefix
= NULL.
Therefore:
- When recursive_prefix is non-NULL, prefix is NULL, and thus
get_submodule_displaypath() just returns prefixed_path. This is
identical to calling do_get_submodule_displaypath() with super_prefix
= recursive_prefix because the return value is still the concatenation
of recursive_prefix + update_data->sm_path.
- When prefix is non-NULL, prefixed_path = update_data->sm_path. Thus
calling get_submodule_displaypath() with prefixed_path is equivalent
to calling do_get_submodule_displaypath() with update_data->sm_path
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_submodule() uses duplicated code to compute
update_data->displaypath and next.recursive_prefix. The latter is just
the former with "/" appended to it, and since update_data->displaypath
not changed outside of this statement, we can just reuse the already
computed result.
We can go one step further and remove the reference to
next.recursive_prefix altogether. Since it is only used in
update_data_to_args() (to compute the "--recursive-prefix" flag for the
recursive update child process) we can just use the already computed
.displaypath value of there.
Delete the duplicated code, and remove the unnecessary reference to
next.recursive_prefix. As a bonus, this fixes a memory leak where
prefixed_path was never freed (this leak was first reported in [1]).
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path, but should just use
do_get_submodule_displaypath() for consistency.
Do this replacement and reorder the code slightly to avoid computing
the display path twice.
Until the preceding commit this code had never been tested, with our
newly added tests we can see that both these sites have been computing
the display path incorrectly ever since they were introduced in 48308681b0 (git submodule update: have a dedicated helper for cloning,
2016-02-29) [1]:
- The first hunk puts a "/" between recursive_prefix and ce->name, but
recursive_prefix already ends with "/".
- The second hunk calls relative_path() on recursive_prefix and
ce->name, but relative_path() only makes sense when both paths share
the same base directory. This is never the case here:
- recursive_prefix is the path from the topmost superproject to the
current submodule
- ce->name is the path from the root of the current submodule to its
submodule.
so, e.g. recursive_prefix="super" and ce->name="submodule" produces
displayname="../super" instead of "super/submodule".
[1] I verified this by applying the tests to 48308681b0.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path. As discussed in the
next commit the "Skipping" output isn't exactly what we want, but
let's test how we behave now, before changing the existing behavior.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config tests: fix harmless but broken "rm -r" cleanup
The "test_when_finished" cleanup phase added in 4179b4897f2 (config:
allow overriding of global and system configuration, 2021-04-19) has
never worked as intended, firstly the ".config/git" is a directory, so
we'd need the "-r" flag, but more importantly the $HOME variable
wasn't properly quoted.
We'd thus end up trying to remove the "trash" part of "trash
directory", which wouldn't fail with "-f", since "rm -f" won't fail on
non-existing files.
It's possible that this would have caused an actual failure if someone
had a $HOME with a space character in it, such that our "rm -f" would
fail to remove an existing directory, but in practice that probably
never happened.
Let's fix both the quoting issue, and the other issue cleanup issue in 4179b4897f2, which is that we were attempting to clean up
~/.config/git, but weren't cleaing up ~/.gitconfig.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a quoting issue in the function introduced in b9638d7286f (test-lib: make $GIT_BUILD_DIR an absolute path,
2022-02-27), running the test suite where the git checkout was on a
path with e.g. a space in it would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: add missing double quotes to included library paths
Fix inclusion errors which would occur if the $TEST_DIRECTORY had $IFS
whitespace in it.
See d42bab442d7 (core.fsyncmethod: tests for batch mode, 2022-04-04)
and a242c150ebb (vimdiff: integrate layout tests in the unit tests
framework ('t' folder), 2022-03-30) for the two relevant commits. Both
were first released with v2.37.0-rc0 (and were also part of v2.37.0).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 29 Jun 2022 13:21:07 +0000 (13:21 +0000)]
git-rebase.txt: use back-ticks consistently
While inspecting the 'git rebase' documentation, I noticed that it is
inconsistent with how it uses back-ticks (or other punctuation) for
identifying Git commands, command-line arguments, or values for those
arguments.
Sometimes, an argument (like '--interactive') would appear without any
punctuation, causing the argument to not have any special formatting.
Other times, arguments or 'git rebase' itself would have single-quotes
giving a bold look (in the HTML documentation at least).
By consistently using back-ticks, these types of strings appear in a
monospace font with special highlighting to appear more clearly as text
that exists in a command-line invocation of a Git command.
This rather-large diff is the result of scanning git-rebase.txt and
adding back-ticks as appropriate. Some are adding back-ticks where there
was no punctuation. Others are replacing single quotes.
There are also a few minor cleanups in the process, including those
found by reviewers.
Helped-by: Phillip Wood <phillip.wood123@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 28 Jun 2022 18:30:20 +0000 (14:30 -0400)]
pack-objects.h: remove outdated pahole results
The size and padding of `struct object_entry` is an important factor in
determining the memory usage of `pack-objects`. For this reason, 3b13a5f263 (pack-objects: reorder members to shrink struct object_entry,
2018-04-14) added a comment containing some information from pahole
indicating the size and padding of that struct.
Unfortunately, this comment hasn't been updated since 9ac3f0e5b3
(pack-objects: fix performance issues on packing large deltas,
2018-07-22), despite the size of this struct changing many times since
that commit.
To see just how often the size of object_entry changes, I skimmed the
first-parent history with this script:
for sha in $(git rev-list --first-parent --reverse 9ac3f0e..)
do
echo -n "$sha "
git checkout -q $sha
make -s pack-objects.o 2>/dev/null
pahole -C object_entry pack-objects.o | sed -n \
-e 's/\/\* size: \([0-9]*\).*/size \1/p' \
-e 's/\/\*.*padding: \([0-9]*\).*/padding \1/p' | xargs
done | uniq -f1
In between each merge, the size of object_entry changes too often to
record every instance here. But the important merges (along with their
corresponding sizes and bit paddings) in chronological order are:
(indicating that the current size of the struct is 96 bytes, with 8
padding bits).
Even though this comment was written in a good spirit, it is updated
infrequently enough that it serves to confuse rather than to encourage
contributors to update the appropriate values when the modify the
definition of object_entry.
For that reason, eliminate the confusion by removing the comment
altogether.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add --interactive: allow `update` to stage deleted files
The scripted version of `git add -i` used `git update-index --add
--remove`, but the built-in version implemented only the `--add` part.
This fixes https://github.com/msys2/MSYS2-packages/issues/3066
Reported-by: Christoph Reiter <reiter.christoph@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
From looking at the {Free,Net,Dragonfly}BSD packages for git[1]
they've been monkeypatching "gitweb" out of the Makefile, let's be
nicer and provide a NO_GITWEB=Y for their use.
For the "all" target this allows for optionally restoring what's been
the status quo before the preceding commit, but now we'll also behave
correctly on the subsequent "make install".
As before our installation of gitweb can be suppressed with
NO_PERL. For backwards compatibility the NO_PERL=Y flag by itself
still doesn't change whether or not we build gitweb, unlike the new
NO_GITWEB=Y flag.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Tue, 28 Jun 2022 10:16:01 +0000 (12:16 +0200)]
Makefile: build 'gitweb' in the default target
Our Makefile's default target used to build 'gitweb', though
indirectly: the 'all' target depended on 'git-instaweb', which in turn
depended on 'gitweb'. Then e25c7cc146 (Makefile: drop dependency
between git-instaweb and gitweb, 2015-05-29) removed the latter
dependency, and for good reasons (quoting its commit message):
"1. git-instaweb has no build-time dependency on gitweb; it
is a run-time dependency
2. gitweb is a directory that we want to recursively make
in. As a result, its recipe is marked .PHONY, which
causes "make" to rebuild git-instaweb every time it is
run."
Since then a simple 'make' doesn't build 'gitweb'.
Luckily, installing 'gitweb' is not broken: although 'make install'
doesn't depend on the 'gitweb' target, it has a dependency on the
'install-gitweb' target, which does generate all the necessary files
for 'gitweb' and installs them. However, if someone runs 'make &&
sudo make install', then those files in the 'gitweb' directory will be
generated and owned by root, which is not nice.
List 'gitweb' as a direct dependency of the default target, so a plain
'make' will build it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include the gitweb/Makefile in the top-level Makefile rather than
calling it as a sub-Makefile. As noted in the thread starting at at
[1] (in particular [2]) we'll pay a high cost on NOOP runs of "make"
just to figure out that we have nothing to do for "make gitweb".
The "gitweb" script also isn't maintained out-of-tree, unlike
"gitk-git" or "git-gui", which both have their own "Makefile". Other
parts of it are already integrated into our main Makefiles, e.g. the
documentation is built by Documentation/Makefile since 07ea4df2780 (gitweb: Add gitweb(1) manpage for gitweb itself,
2011-10-16).
gitweb: remove "test" and "test-installed" targets
Remove the special "test" targets for gitweb added in 958a8467216 (gitweb/Makefile: Add 'test' and 'test-installed' targets,
2010-09-26). Unlike e.g. "contrib/scalar" and "contrib/subtree" the
"gitweb" tests themselves live in our top-level t/ directory.
It therefore doesn't make sense to maintain this indirection, no more
than it would to have a "git-send-email-test". By dropping it we'll
also free other tests to use the t95*.sh prefix.
These removed targets are unlikely to be used by anyone, and to the
extent that they are we can easily use an invocation like this
instead:
make test T='t[0-9]*gitweb*.sh'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb/Makefile: prepare to merge into top-level Makefile
Since the "gitweb/Makefile" was split out from the top-level Makefile
in 62331ef1637 (gitweb: Makefile improvements, 2010-01-30) we've kept
the inter-dependencies between the two, and worse have dealt with a
lot of duplication as a result.
In preparation for merging the two again add a MAK_DIR_GITWEB variable
to various rules in it. This will allow us to set this variable to
"gitweb/" as we include it in the top-level Makefile, which will
minimize the size of the subsequent diff.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb/Makefile: clear up and de-duplicate the gitweb.{css,js} vars
Change the variable definitions for the $(GITWEB_CSS) and $(GITWEB_JS)
so that we have a clear separation between what we use as "in" files,
v.s. our "min" files. We can now make the appending to $(GITWEB_FILES)
unconditional, since $(GITWEB_{JS,CSS}) is either the "min" or
non-"min" version. This reduces the duplication within the file.
While we're at it let's initialize "GITWEB_JSLIB_FILES" as we normally
do with such variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb/Makefile: define all .PHONY prerequisites inline
Move the '.PHONY' definition so that it's split up and accompanies the
relevant as they're defined. This will make a subsequent diff smaller
as we'll remove some of these, and won't need to re-edit the
now-removed '.PHONY' line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-setup.sh: remove "say" function, change last users
Remove the "say" function, with various rewrites of the remaining
git-*.sh code to C and the preceding change to have git-submodule.sh
stop using the GIT_QUIET variable there were only four uses in
git-subtree.sh. Let's have it use an "arg_quiet" variable instead, and
move the "say" function over to it.
The only other use was a trivial message in git-instaweb.sh, since it
has never supported the --quiet option (or similar) that code added in 0b624b4ceee (instaweb: restart server if already running, 2009-11-22)
can simply use "echo" instead.
The remaining in-tree hits from "say" are all for the sibling function
defined in t/test-lib.sh. It's safe to remove this function since it
has never been documented in Documentation/git-sh-setup.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
