tests: change "cat && chmod +x" to use "test_hook"
Refactor various test code to use the "test_hook" helper. This change:
- Fixes the long-standing issues with those tests using "#!/bin/sh"
instead of "#!$SHELL_PATH". Using "#!/bin/sh" here happened to work
because this code was so simple that it e.g. worked on Solaris
/bin/sh.
- Removes the "mkdir .git/hooks" invocation, as explained in a
preceding commit we'll rely on the default templates to create that
directory for us.
For the test in "t5402-post-merge-hook.sh" it's easier and more
correct to unroll the for-loop into a test_expect_success, so let's do
that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the repository setup code for tests that test hooks the use
of sub-shells when setting up the test repository and hooks, and use
the "test_hook" wrapper instead of "write_scripts".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch+push tests: use "test_hook" and "test_when_finished" pattern
Change the "t5516-fetch-push.sh" test code to make use of the new
"test_hook" helper, and to use "test_when_finished" to have tests
clean up their own state, instead of relying on subsequent tests to
clean the trash directory.
Before this each test would have been responsible for cleaning up
after a preceding test (which may or may not have run, e.g. if --run
or "GIT_SKIP_TESTS" was used), now each test will instead clean up
after itself.
In order to use both "test_hook" and "test_when_finished" we need to
move them out of sub-shells, which requires some refactoring.
While we're at it split up the "push with negotiation" test, now the
middle of the test doesn't need to "rm event", and since it delimited
two halves that were testing two different things the end-state is
easier to read and reason about.
While changing these lines make the minor change from "-fr" to "-rf"
as the "rm" argument, some of them used it already, it's more common
in the test suite, and it leaves the end-state of the file with more
consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bugreport tests: tighten up "git bugreport -s hooks" test
Amend a test added in 788a776069b (bugreport: collect list of
populated hooks, 2020-05-07) to "test_cmp" for the expected output,
instead of selectively using "grep" to check for specific things we
either expect or don't expect in the output.
As noted in a preceding commit our .git/hooks directory already
contains *.sample hooks, so we have no need to clobber the
prepare-commit-msg.sample hook in particular.
Instead we should assert that those *.sample hooks are not included in
the output, and for good measure let's add a new "unknown-hook", to
check that we only look through our own known hooks. See cfe853e66be (hook-list.h: add a generated list of hooks, like
config-list.h, 2021-09-26) for how we generate that data.
We're intentionally not piping the "actual" output through "sort" or
similar, we'd also like to check that our reported hooks are sorted.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop moving the .git/hooks directory out of the way, or creating it
during test setup. Instead assume that it will contain
harmless *.sample files.
That we can assume that is discussed in point #4 of f0d4d398e28 (test-lib: split up and deprecate test_create_repo(),
2021-05-10), those parts of this could and should have been done in
that change.
Removing the "mkdir -p" here will then validate that our templates are
being used, since we'd subsequently fail to create a hook in that
directory if it didn't exist. Subsequent commits will have those hooks
created by a "test_hook" wrapper, which will then being doing that
same validation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http tests: don't rely on "hook/post-update.sample"
Change code added in a87679339c0 (test: rename http fetch and push
test files, 2014-02-06) to stop relying on the "exec git
update-server-info" in "templates/hooks--post-update.sample", let's
instead inline the expected hook in the test itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a test added in 96e7225b310 (hook: add 'run' subcommand,
2021-12-22) to use a for-loop instead of a copy/pasting the same test
for the four exit codes we test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib-functions: add and use a "test_hook" wrapper
Add a "test_hook" wrapper similar to the existing "test_config"
wrapper added in d960c47a881 (test-lib: add helper functions for
config, 2011-08-17).
This wrapper:
- Will clean up the hook with "test_when_finished", unless --setup is
provided.
- Will error if we clobber a hook, unless --clobber is provided.
- Takes a name like "update" instead of ".git/hooks/update".
- Accepts -C <dir>, like "test_config" and "test_commit".
By using a wrapper we'll be able to easily change all the hook-related
code that assumes that the template-created ".git/hooks" directory is
created by "init", "clone" etc. once another topic follows-up and
changes the test suite to stop creating trash directories using those
templates.
In addition this will make it easy to have the hooks configured using
the "configuration-based hooks" topic, once we get around to
integrating that. I.e. we'll be able to run the tests in a mode where
we sometimes create a .git/hooks/<name>, and other times create a
script in another location, and point the relevant configuration
snippet to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw-w64's pthread_unistd.h had a bug that mistakenly (because there is
no support for the *lockfile() functions required[1]) defined
_POSIX_THREAD_SAFE_FUNCTIONS and that was being worked around since 3ecd153a3b (compat/mingw: support MSys2-based MinGW build, 2016-01-14).
The bug was fixed in winphtreads, but as a side effect, leaves the
reentrant functions from time.h no longer visible and therefore breaks
the build.
Since the intention all along was to avoid using the fallback functions,
formalize the use of POSIX by setting the corresponding feature flag and
compile out the implementation for the fallback functions.
[1] https://unix.org/whitepapers/reentrant.html
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 17 Mar 2022 00:53:09 +0000 (17:53 -0700)]
Merge branch 'tk/t7063-chmtime-dirs-too'
Teach "test-chmtime" to work on a directory and use it to avoid
having to wait for a second in a few places in tests.
* tk/t7063-chmtime-dirs-too:
t7063: mtime-mangling instead of delays in untracked cache testing
t/helper/test-chmtime: update mingw to support chmtime on directories
Junio C Hamano [Thu, 17 Mar 2022 00:53:08 +0000 (17:53 -0700)]
Merge branch 'tb/rename-remote-progress'
"git remote rename A B", depending on the number of remote-tracking
refs involved, takes long time renaming them. The command has been
taught to show progress bar while making the user wait.
* tb/rename-remote-progress:
builtin/remote.c: show progress when renaming remote references
builtin/remote.c: parse options in 'rename'
Junio C Hamano [Thu, 17 Mar 2022 00:53:08 +0000 (17:53 -0700)]
Merge branch 'vd/sparse-read-tree'
"git read-tree" has been made to be aware of the sparse-index
feature.
* vd/sparse-read-tree:
read-tree: make three-way merge sparse-aware
read-tree: make two-way merge sparse-aware
read-tree: narrow scope of index expansion for '--prefix'
read-tree: integrate with sparse index
read-tree: expand sparse checkout test coverage
read-tree: explicitly disallow prefixes with a leading '/'
status: fix nested sparse directory diff in sparse index
sparse-index: prevent repo root from becoming sparse
Junio C Hamano [Thu, 17 Mar 2022 00:53:08 +0000 (17:53 -0700)]
Merge branch 'ab/object-file-api-updates'
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
Junio C Hamano [Thu, 17 Mar 2022 00:53:07 +0000 (17:53 -0700)]
Merge branch 'ps/fetch-mirror-optim'
Various optimization for "git fetch".
* ps/fetch-mirror-optim:
refs/files-backend: optimize reading of symbolic refs
remote: read symbolic refs via `refs_read_symbolic_ref()`
refs: add ability for backends to special-case reading of symbolic refs
fetch: avoid lookup of commits when not appending to FETCH_HEAD
upload-pack: look up "want" lines via commit-graph
Junio C Hamano [Thu, 17 Mar 2022 00:53:07 +0000 (17:53 -0700)]
Merge branch 'tk/empty-untracked-cache'
The untracked cache newly computed weren't written back to the
on-disk index file when there is no other change to the index,
which has been corrected.
* tk/empty-untracked-cache:
untracked-cache: write index when populating empty untracked cache
t7519: populate untracked cache before test
t7519: avoid file to index mtime race for untracked cache
Glen Choo [Tue, 8 Mar 2022 00:14:33 +0000 (16:14 -0800)]
submodule: fix latent check_has_commit() bug
When check_has_commit() is called on a missing submodule, initialization
of the struct repository fails, but it attempts to clear the struct
anyway (which is a fatal error). This bug is masked by its only caller,
submodule_has_commits(), first calling add_submodule_odb(). The latter
fails if the submodule does not exist, making submodule_has_commits()
exit early and not invoke check_has_commit().
Fix this bug, and because calling add_submodule_odb() is no longer
necessary as of 13a2f620b2 (submodule: pass repo to
check_has_commit(), 2021-10-08), remove that call too.
This is the last caller of add_submodule_odb(), so remove that
function. (Submodule ODBs are still added as alternates via
add_submodule_odb_by_path().)
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Tue, 8 Mar 2022 00:14:32 +0000 (16:14 -0800)]
fetch: fetch unpopulated, changed submodules
"git fetch --recurse-submodules" only considers populated
submodules (i.e. submodules that can be found by iterating the index),
which makes "git fetch" behave differently based on which commit is
checked out. As a result, even if the user has initialized all submodules
correctly, they may not fetch the necessary submodule commits, and
commands like "git checkout --recurse-submodules" might fail.
Teach "git fetch" to fetch cloned, changed submodules regardless of
whether they are populated. This is in addition to the current behavior
of fetching populated submodules (which is always attempted regardless
of what was fetched in the superproject, or even if nothing was fetched
in the superproject).
A submodule may be encountered multiple times (via the list of
populated submodules or via the list of changed submodules). When this
happens, "git fetch" only reads the 'populated copy' and ignores the
'changed copy'. Amend the verify_fetch_result() test helper so that we
can assert on which 'copy' is being read.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Atharva Raykar [Tue, 15 Mar 2022 21:09:24 +0000 (14:09 -0700)]
submodule: move core cmd_update() logic to C
This patch completes the conversion past the flag parsing of
`submodule update` by introducing a helper subcommand called
`submodule--helper update`. The behaviour of `submodule update` should
remain the same after this patch.
Prior to this patch, `submodule update` was implemented by piping the
output of `update-clone` (which clones all missing submodules, then
prints relevant information for all submodules) into
`run-update-procedure` (which reads the information and updates the
submodule tree).
With `submodule--helper update`, we iterate over the submodules and
update the submodule tree in the same process. This reuses most of
existing code structure, except that `update_submodule()` now updates
the submodule tree (instead of printing submodule information to be
consumed by another process).
Recursing on a submodule is done by calling a subprocess that launches
`submodule--helper update`, with a modified `--recursive-prefix` and
`--prefix` parameter.
Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Shourya Shukla <periperidip@gmail.com> Signed-off-by: Atharva Raykar <raykar.ath@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Tue, 15 Mar 2022 21:09:23 +0000 (14:09 -0700)]
submodule--helper: reduce logic in run_update_procedure()
A later commit will combine the "update-clone" and
"run-update-procedure" commands, so run_update_procedure() will be
removed. Prepare for this by moving as much logic as possible out of
run_update_procedure() and into update_submodule2().
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Tue, 15 Mar 2022 21:09:22 +0000 (14:09 -0700)]
submodule--helper: teach update_data more options
Refactor 'struct update_data' to hold the parsed args needed by "git
submodule--helper update" and refactor "update-clone" and
"run-update-procedure" (the functions that will be combined to form
"update") to use these options.
For "run-update-procedure", 'struct update_data' already holds its args,
so only arg parsing code needs to be updated.
For "update-clone", move its args from 'struct submodule_update_clone'
into 'struct update_data', and replace them with a pointer to 'struct
update_data'. Its other members hold the submodule iteration state of
"update-clone", so those are unchanged.
Incidentally, since we reformat the designated initializers of the
affected structs, also reformat MODULE_CLONE_DATA_INIT for consistency.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/submodule--helper.c: rename option struct to "opt"
In a later commit, update_clone()'s options will be stored in a struct
update_data instead of submodule_update_clone. Preemptively rename the
options struct to "opt" to shrink that commit's diff.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Tue, 15 Mar 2022 21:09:20 +0000 (14:09 -0700)]
submodule update: use die_message()
Use die_message() to print the "fatal: " prefix instead of doing it in
git-submodule.sh and remove a now-unnecessary exit code from "git
submodule--helper run-update-procedure".
Also, since die_message() adds the newline for us, replace an invocation
of die_with_status() with printf + exit invocations that do not add a
newline, but are otherwise identical to die_with_status().
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Atharva Raykar [Tue, 15 Mar 2022 21:09:19 +0000 (14:09 -0700)]
submodule--helper: run update using child process struct
We switch to using the run-command API function that takes a
'struct child process', since we are using a lot of the options. This
will also make it simple to switch over to using 'capture_command()'
when we start handling the output of the command completely in C.
Mentored-by: Christian Couder <christian.couder@gmail.com> Mentored-by: Shourya Shukla <periperidip@gmail.com> Signed-off-by: Atharva Raykar <raykar.ath@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 16 Mar 2022 22:07:34 +0000 (15:07 -0700)]
Merge branch 'gc/submodule-update-part1' into gc/submodule-update-part2
* gc/submodule-update-part1:
submodule--helper update-clone: check for --filter and --init
submodule update: add tests for --filter
submodule--helper: remove ensure-core-worktree
submodule--helper update-clone: learn --init
submodule--helper: allow setting superprefix for init_submodule()
submodule--helper: refactor get_submodule_displaypath()
submodule--helper run-update-procedure: learn --remote
submodule--helper: don't use bitfield indirection for parse_options()
submodule--helper: get remote names from any repository
submodule--helper run-update-procedure: remove --suboid
submodule--helper: reorganize code for sh to C conversion
submodule--helper: remove update-module-mode
submodule tests: test for init and update failure output
Phillip Wood [Wed, 16 Mar 2022 18:54:05 +0000 (18:54 +0000)]
terminal: restore settings on SIGTSTP
If the user suspends git while it is waiting for a keypress reset the
terminal before stopping and restore the settings when git resumes. If
the user tries to resume in the background print an error
message (taking care to use async safe functions) before stopping
again. Ideally we would reprint the prompt for the user when git
resumes but this patch just restarts the read().
The signal handler is established with sigaction() rather than using
sigchain_push() as this allows us to control the signal mask when the
handler is invoked and ensure SA_RESTART is used to restart the
read() when resuming.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Wed, 16 Mar 2022 18:54:04 +0000 (18:54 +0000)]
terminal: work around macos poll() bug
On macos the builtin "add -p" does not handle keys that generate
escape sequences because poll() does not work with terminals
there. Switch to using select() on non-windows platforms to work
around this.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Wed, 16 Mar 2022 18:54:03 +0000 (18:54 +0000)]
terminal: don't assume stdin is /dev/tty
read_key_without_echo() reads from stdin but uses /dev/tty when it
disables echo. This is unfortunate as there no guarantee that stdin is
the same device as /dev/tty. The perl version of "add -p" uses stdin
when it sets the terminal mode, this commit does the same for the
builtin version. There is still a difference between the perl and
builtin versions though - the perl version will ignore any errors when
setting the terminal mode[1] and will still read single bytes when
stdin is not a terminal. The builtin version displays a warning if
setting the terminal mode fails and switches to reading a line at a
time.
Phillip Wood [Wed, 16 Mar 2022 18:54:02 +0000 (18:54 +0000)]
terminal: use flags for save_term()
The next commit will add another flag in addition to the existing
full_duplex so change the function signature to take a flags
argument. Also alter the functions that call save_term() so that they
can pass flags down to it.
The choice to use an enum for tho bitwise flags is because gdb will
display the symbolic names of all the flags that are set rather than
the integer value.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a blobless-cloned repo, `git log --follow -- <path>` (`<path>` have
an exact OID rename) shouldn't download blob of the file from where the
new file is renamed.
Add a test case to verify it.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of creating a new allocation, reverse the original list
in-place by calling the reverse_commit_list() helper.
The original code discards the list "bases" after storing its
reverse copy in a newly created list "reversed". If the code that
followed from here used both "bases" and "reversed", the
modification would not have worked, but since the original list
"bases" gets discarded, we can simply reverse "bases" in-place with
the reverse_commit_list() helper and reuse the same variable in the
code that follows.
builtin/merge.c has been left unmodified, since in its case, the
original list is needed separately from its reverse copy by the
code.
Signed-off-by: Jayati Shrivastava <gaurijove@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Cantrell [Tue, 15 Mar 2022 22:13:57 +0000 (22:13 +0000)]
completion: tab completion of filenames for 'git restore'
If no --args are present after 'git restore', it assumes that you
want to tab-complete one of the files with unstaged uncommitted
changes.
If a file has been staged, we don't want to list it, as restoring those
requires a slightly more complex `git restore --staged`, so we only list
those files that are --modified. While --committable also looks like
a good candidate, that includes changes that have been staged.
Signed-off-by: David Cantrell <david@cantrell.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing both loose and packed references to disk we first create a
lockfile, write the updated values into that lockfile, and on commit we
rename the file into place. According to filesystem developers, this
behaviour is broken because applications should always sync data to disk
before doing the final rename to ensure data consistency [1][2][3]. If
applications fail to do this correctly, a hard crash of the machine can
easily result in corrupted on-disk data.
This kind of corruption can in fact be easily observed with Git when the
machine hard-resets shortly after writing references to disk. On
machines with ext4, this will likely lead to the "empty files" problem:
the file has been renamed, but its data has not been synced to disk. The
result is that the reference is corrupt, and in the worst case this can
lead to data loss.
Implement a new option to harden references so that users and admins can
avoid this scenario by syncing locked loose and packed references to
disk before we rename them into place.
[1]: https://thunk.org/tytso/blog/2009/03/15/dont-fear-the-fsync/
[2]: https://btrfs.wiki.kernel.org/index.php/FAQ (What are the crash guarantees of overwrite-by-rename)
[3]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/admin-guide/ext4.rst (see auto_da_alloc)
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 15 Mar 2022 20:30:37 +0000 (13:30 -0700)]
Merge branch 'ns/core-fsyncmethod' into ps/fsync-refs
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
Neeraj Singh [Tue, 15 Mar 2022 19:12:45 +0000 (12:12 -0700)]
core.fsync: documentation and user-friendly aggregate options
This commit adds aggregate options for the core.fsync setting that are
more user-friendly. These options are specified in terms of 'levels of
safety', indicating which Git operations are considered to be sync
points for durability.
The new documentation is also included here in its entirety for ease of
review.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 15 Mar 2022 17:41:44 +0000 (17:41 +0000)]
maintenance: fix synopsis in documentation
The synopsis for 'git maintenance' did not include the commands other
than the 'run' command. Update this to include the others. The 'start'
command is the only one of these that parses additional options, and
then only the --scheduler option.
Also move the 'register' command down after 'stop' and before
'unregister' for a logical grouping of the commands instead of an
alphabetical one. The diff makes it look as three other commands are
moved up.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
John Cai [Tue, 15 Mar 2022 02:40:36 +0000 (02:40 +0000)]
cat-file: skip expanding default format
When format is passed into --batch, --batch-check, --batch-command,
the format gets expanded. When nothing is passed in, the default format
is set and the expand_format() gets called.
We can save on these cycles by hardcoding how to print the
information when nothing is passed as the format, or when the default
format is passed. There is no need for the fully expanded format with
the default. Since batch_object_write() happens on every object provided
in batch mode, we get a nice performance improvement.
git rev-list --all > /tmp/all-obj.txt
git cat-file --batch-check </tmp/all-obj.txt
with HEAD^:
Time (mean ± σ): 57.6 ms ± 1.7 ms [User: 51.5 ms, System: 6.2 ms]
Range (min … max): 54.6 ms … 64.7 ms 50 runs
with HEAD:
Time (mean ± σ): 49.8 ms ± 1.7 ms [User: 42.6 ms, System: 7.3 ms]
Range (min … max): 46.9 ms … 55.9 ms 56 runs
If nothing is provided as a format argument, or if the default format is
passed, skip expanding of the format and print the object info with a
default format.
See https://lore.kernel.org/git/87eecf8ork.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: John Cai <johncai86@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 15 Mar 2022 01:49:42 +0000 (01:49 +0000)]
stash: make internal resets quiet and refresh index
Add the options '-q' and '--refresh' to the 'git reset' executed in
'reset_head()', and '--refresh' to the 'git reset -q' executed in
'do_push_stash(...)'.
'stash' is implemented such that git commands invoked as part of it (e.g.,
'clean', 'read-tree', 'reset', etc.) have their informational output
silenced. However, the 'reset' in 'reset_head()' is *not* called with '-q',
leading to the potential for a misleading printout from 'git stash apply
--index' if the stash included a removed file:
Unstaged changes after reset: D <deleted file>
Not only is this confusing in its own right (since, after the reset, 'git
stash' execution would stage the deletion in the index), it would be printed
even when the stash was applied with the '-q' option. As a result, the
messaging is removed entirely by calling 'git status' with '-q'.
Additionally, because the default behavior of 'git reset -q' is to skip
refreshing the index, but later operations in 'git stash' subcommands expect
a non-stale index, enable '--refresh' as well.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 15 Mar 2022 01:49:41 +0000 (01:49 +0000)]
reset: suppress '--no-refresh' advice if logging is silenced
If using '--quiet' or 'reset.quiet=true', do not print the 'resetnoRefresh'
advice string. For applications that rely on '--quiet' disabling all
non-error logs, the advice message should be suppressed accordingly.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 15 Mar 2022 01:49:40 +0000 (01:49 +0000)]
reset: replace '--quiet' with '--no-refresh' in performance advice
Replace references to '--quiet' with '--no-refresh' in the advice on how to
skip refreshing the index. When the advice was introduced, '--quiet' was the
only way to avoid the expensive 'refresh_index(...)' at the end of a mixed
reset. After introducing '--no-refresh', however, '--quiet' became only a
fallback option for determining refresh behavior, overridden by
'--[no-]refresh' or 'reset.refresh' if either is set. To ensure users are
advised to use the most reliable option for avoiding 'refresh_index(...)',
replace recommendation of '--quiet' with '--[no-]refresh'.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 15 Mar 2022 01:49:39 +0000 (01:49 +0000)]
reset: introduce --[no-]refresh option to --mixed
Add a new --[no-]refresh option that is intended to explicitly determine
whether a mixed reset should end in an index refresh.
Starting at 9ac8125d1a (reset: don't compute unstaged changes after reset
when --quiet, 2018-10-23), using the '--quiet' option results in skipping
the call to 'refresh_index(...)' at the end of a mixed reset with the goal
of improving performance. However, by coupling behavior that modifies the
index with the option that silences logs, there is no way for users to have
one without the other (i.e., silenced logs with a refreshed index) without
incurring the overhead of a separate call to 'git update-index --refresh'.
Furthermore, there is minimal user-facing documentation indicating that
--quiet skips the index refresh, potentially leading to unexpected issues
executing commands after 'git reset --quiet' that do not themselves refresh
the index (e.g., internals of 'git stash', 'git read-tree').
To mitigate these issues, '--[no-]refresh' and 'reset.refresh' are
introduced to provide a dedicated mechanism for refreshing the index. When
either is set, '--quiet' and 'reset.quiet' revert to controlling only
whether logs are silenced and do not affect index refresh.
Helped-by: Derrick Stolee <derrickstolee@github.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 15 Mar 2022 01:49:38 +0000 (01:49 +0000)]
reset: revise index refresh advice
Update the advice describing index refresh from "enumerate unstaged changes"
to "refresh the index." Describing 'refresh_index(...)' as "enumerating
unstaged changes" is not fully representative of what an index refresh is
doing; more generally, it updates the properties of index entries that are
affected by outside-of-index state, e.g. CE_UPTODATE, which is affected by
the file contents on-disk. This distinction is relevant to operations that
read the index but do not refresh first - e.g., 'git read-tree' - where a
stale index may cause incorrect behavior.
In addition to changing the advice message, use the "advise" function to
print advice.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git-repack(1) will update server info that is required by
the dumb HTTP transport. This can be skipped by passing the `-n` flag,
but what we're noticably missing is a config option to permanently
disable updating this information.
Add a new option "repack.updateServerInfo" which can be used to disable
the logic. Most hosting providers have turned off the dumb HTTP protocol
anyway, and on the client-side it woudln't typically be useful either.
Giving a persistent way to disable this feature thus makes quite some
sense to avoid wasting compute cycles and storage.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
repack: refactor to avoid double-negation of update-server-info
By default, git-repack(1) runs `update_server_info()` to generate info
required for the dumb HTTP protocol. This can be disabled via the `-n`
flag, which then sets the `no_update_server_info` flag. Further down the
code this leads to some double-negation logic, which is about to become
more confusing as we're about to add a new config which allows the user
to permanently disable generation of the info.
Refactor the code to avoid the double-negation and add some tests which
verify that the flag continues to work as expected.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 13 Mar 2022 22:56:18 +0000 (22:56 +0000)]
Merge branch 'ab/plug-random-leaks'
Plug random memory leaks.
* ab/plug-random-leaks:
repository.c: free the "path cache" in repo_clear()
range-diff: plug memory leak in read_patches()
range-diff: plug memory leak in common invocation
lockfile API users: simplify and don't leak "path"
commit-graph: stop fill_oids_from_packs() progress on error and free()
commit-graph: fix memory leak in misused string_list API
submodule--helper: fix trivial leak in module_add()
transport: stop needlessly copying bundle header references
bundle: call strvec_clear() on allocated strvec
remote-curl.c: free memory in cmd_main()
urlmatch.c: add and use a *_release() function
diff.c: free "buf" in diff_words_flush()
merge-base: free() allocated "struct commit **" list
index-pack: fix memory leaks
Junio C Hamano [Sun, 13 Mar 2022 22:56:17 +0000 (22:56 +0000)]
Merge branch 'fs/gpgsm-update'
Newer version of GPGSM changed its output in a backward
incompatible way to break our code that parses its output. It also
added more processes our tests need to kill when cleaning up.
Adjustments have been made to accommodate these changes.
* fs/gpgsm-update:
t/lib-gpg: kill all gpg components, not just gpg-agent
t/lib-gpg: reload gpg components after updating trustlist
gpg-interface/gpgsm: fix for v2.3
Junio C Hamano [Sun, 13 Mar 2022 22:56:17 +0000 (22:56 +0000)]
Merge branch 'ab/make-optim-noop'
Makefile refactoring with a bit of suffixes rule stripping to
optimize the runtime overhead.
* ab/make-optim-noop:
Makefiles: add and use wildcard "mkdir -p" template
Makefile: add "$(QUIET)" boilerplate to shared.mak
Makefile: move $(comma), $(empty) and $(space) to shared.mak
Makefile: move ".SUFFIXES" rule to shared.mak
Makefile: define $(LIB_H) in terms of $(FIND_SOURCE_FILES)
Makefile: disable GNU make built-in wildcard rules
Makefiles: add "shared.mak", move ".DELETE_ON_ERROR" to it
scalar Makefile: use "The default target of..." pattern
Junio C Hamano [Sun, 13 Mar 2022 22:56:16 +0000 (22:56 +0000)]
Merge branch 'ps/fetch-atomic'
"git fetch" can make two separate fetches, but ref updates coming
from them were in two separate ref transactions under "--atomic",
which has been corrected.
* ps/fetch-atomic:
fetch: make `--atomic` flag cover pruning of refs
fetch: make `--atomic` flag cover backfilling of tags
refs: add interface to iterate over queued transactional updates
fetch: report errors when backfilling tags fails
fetch: control lifecycle of FETCH_HEAD in a single place
fetch: backfill tags before setting upstream
fetch: increase test coverage of fetches
Elia Pinto [Sun, 13 Mar 2022 17:28:29 +0000 (17:28 +0000)]
t6423-merge-rename-directories.sh: use the $(...) construct
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
shellcheck -i SC2006 -f diff ${_f} | ifne git apply -p2
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Sat, 12 Mar 2022 00:00:15 +0000 (16:00 -0800)]
name-rev: use generation numbers if available
If a commit in a sequence of linear history has a non-monotonically
increasing commit timestamp, git name-rev might not properly name the
commit.
This occurs because name-rev uses a heuristic of the commit date to
avoid searching down tags which lead to commits that are older than the
named commit. This is intended to avoid work on larger repositories.
This heuristic impacts git name-rev, and by extension git describe
--contains which is built on top of name-rev.
Further more, if --all or --annotate-stdin is used, the heuristic is not
enabled because the full history has to be analyzed anyways. This
results in some confusion if a user sees that --annotate-stdin works but
a normal name-rev does not.
If the repository has a commit graph, we can use the generation numbers
instead of using the commit dates. This is essentially the same check
except that generation numbers make it exact, where the commit date
heuristic could be incorrect due to clock errors.
Since we're extending the notion of cutoff to more than one variable,
create a series of functions for setting and checking the cutoff. This
avoids duplication and moves access of the global cutoff and
generation_cutoff to as few functions as possible.
Add several test cases including a test that covers the new commitGraph
behavior, as well as tests for --all and --annotate-stdin with and
without commitGraphs.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my daf1d8285ee (reflog expire: don't use
lookup_commit_reference_gently(), 2021-12-22), in changing from
lookup_commit_reference_gently() to lookup_commit() we stopped trying
to call deref_tag() and parse_object() on the provided OID, but we
also started returning non-NULL for the null_oid().
As a result we'd emit an error() via mark_reachable() later in this
function as we tried to invoke parse_commit() on it.
Reported-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Tested-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jaydeep P Das [Sat, 12 Mar 2022 04:48:32 +0000 (10:18 +0530)]
userdiff: add builtin diff driver for kotlin language.
The xfuncname pattern finds func/class declarations
in diffs to display as a hunk header. The word_regex
pattern finds individual tokens in Kotlin code to generate
appropriate diffs.
This patch adds xfuncname regex and word_regex for Kotlin
language.
Signed-off-by: Jaydeep P Das <jaydeepjd.8914@gmail.com> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shubham Mishra [Sat, 12 Mar 2022 06:21:26 +0000 (11:51 +0530)]
t0030-t0050: avoid pipes with Git on LHS
Pipes ignore error codes of LHS command and thus we should not use
them with Git in tests. As an alternative, use a 'tmp' file to write
the Git output so we can test the exit code.
Signed-off-by: Shubham Mishra <shivam828787@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shubham Mishra [Sat, 12 Mar 2022 06:21:25 +0000 (11:51 +0530)]
t0001-t0028: avoid pipes with Git on LHS
Pipes ignore error codes of LHS command and thus we should not use
them with Git in tests. As an alternative, use a 'tmp' file to write
the Git output so we can test the exit code.
Signed-off-by: Shubham Mishra <shivam828787@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neeraj Singh [Thu, 10 Mar 2022 22:43:23 +0000 (22:43 +0000)]
core.fsync: new option to harden the index
This commit introduces the new ability for the user to harden
the index. In the event of a system crash, the index must be
durable for the user to actually find a file that has been added
to the repo and then deleted from the working tree.
We use the presence of the COMMIT_LOCK flag and absence of the
alternate_index_output as a proxy for determining whether we're
updating the persistent index of the repo or some temporary
index. We don't sync these temporary indexes.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neeraj Singh [Thu, 10 Mar 2022 22:43:22 +0000 (22:43 +0000)]
core.fsync: add configuration parsing
This change introduces code to parse the core.fsync setting and
configure the fsync_components variable.
core.fsync is configured as a comma-separated list of component names to
sync. Each time a core.fsync variable is encountered in the
configuration heirarchy, we start off with a clean state with the
platform default value. Passing 'none' resets the value to indicate
nothing will be synced. We gather all negative and positive entries from
the comma separated list and then compute the new value by removing all
the negative entries and adding all of the positive entries.
We issue a warning for components that are not recognized so that the
configuration code is compatible with configs from future versions of
Git with more repo components.
Complete documentation for the new setting is included in a later patch
in the series so that it can be reviewed once in final form.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neeraj Singh [Thu, 10 Mar 2022 22:43:21 +0000 (22:43 +0000)]
core.fsync: introduce granular fsync control infrastructure
This commit introduces the infrastructure for the core.fsync
configuration knob. The repository components we want to sync
are identified by flags so that we can turn on or off syncing
for specific components.
If core.fsyncObjectFiles is set and the core.fsync configuration
also includes FSYNC_COMPONENT_LOOSE_OBJECT, we will fsync any
loose objects. This picks the strictest data integrity behavior
if core.fsync and core.fsyncObjectFiles are set to conflicting values.
This change introduces the currently unused fsync_component
helper, which will be used by a later patch that adds fsyncing to
the refs backend.
Actual configuration and documentation of the fsync components
list are in other patches in the series to separate review of
the underlying mechanism from the policy of how it's configured.
Helped-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neeraj Singh [Thu, 10 Mar 2022 22:43:20 +0000 (22:43 +0000)]
core.fsyncmethod: add writeout-only mode
This commit introduces the `core.fsyncMethod` configuration
knob, which can currently be set to `fsync` or `writeout-only`.
The new writeout-only mode attempts to tell the operating system to
flush its in-memory page cache to the storage hardware without issuing a
CACHE_FLUSH command to the storage controller.
Writeout-only fsync is significantly faster than a vanilla fsync on
common hardware, since data is written to a disk-side cache rather than
all the way to a durable medium. Later changes in this patch series will
take advantage of this primitive to implement batching of hardware
flushes.
When git_fsync is called with FSYNC_WRITEOUT_ONLY, it may fail and the
caller is expected to do an ordinary fsync as needed.
On Apple platforms, the fsync system call does not issue a CACHE_FLUSH
directive to the storage controller. This change updates fsync to do
fcntl(F_FULLFSYNC) to make fsync actually durable. We maintain parity
with existing behavior on Apple platforms by setting the default value
of the new core.fsyncMethod option.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neeraj Singh [Thu, 10 Mar 2022 22:43:19 +0000 (22:43 +0000)]
wrapper: make inclusion of Windows csprng header tightly scoped
Including NTSecAPI.h in git-compat-util.h causes build errors in any
other file that includes winternl.h. NTSecAPI.h was included in order to
get access to the RtlGenRandom cryptographically secure PRNG. This
change scopes the inclusion of ntsecapi.h to wrapper.c, which is the only
place that it's actually needed.
The build breakage is due to the definition of UNICODE_STRING in
NtSecApi.h:
#ifndef _NTDEF_
typedef LSA_UNICODE_STRING UNICODE_STRING, *PUNICODE_STRING;
typedef LSA_STRING STRING, *PSTRING ;
#endif
Both definitions have equivalent layouts. Apparently these internal
Windows headers aren't designed to be included together. This is
an oversight in the headers and does not represent an incompatibility
between the APIs.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 10 Mar 2022 17:47:50 +0000 (17:47 +0000)]
block-sha1: remove use of obsolete x86 assembly
In the block SHA-1 code, we have special assembly code for i386 and
amd64 to perform rotations with assembly. This is supposed to help pick
the correct rotation operation depending on which rotation is smaller,
which can help some systems perform slightly better, since any circular
rotation can be specified as either a rotate left or a rotate right.
However, this isn't needed, so we should remove it.
First, SHA-1, like SHA-2, uses fixed constant rotates. Thus, all
rotation amounts are known at compile time and are in fact baked into
the code. Fortunately, peephole optimizers recognize rotations
specified in the normal way and automatically emit the correct code,
including a preference for choosing a rotate left versus a rotate right.
This has been the case for well over a decade, and is a standard example
of the utility of a peephole optimizer.
Moreover, all modern CPUs, with the exception of extremely limited
embedded CPUs such as some Cortex-M processors, provide a barrel
shifter, which lets the CPU perform rotates of any bit amount in
constant time. This is valuable for many cryptographic algorithms to
improve performance, and is required to prevent timing attacks in
algorithms which use data-dependent rotations (which don't include the
hash algorithms we use). As a result, even though the compiler does the
correct optimization, it isn't even needed here and either a left or a
right rotate is equally acceptable.
In fact, the SHA-256 code already takes this into account and just
writes the simple code using an inline function to let the compiler
optimize it for us.
The downside of using this code, however, is that it uses a GCC
extension, which makes the compiler complain when using -pedantic unless
it's prefixed with __extension__. We could fix that, but since it's
not needed, let's just remove it. We haven't noticed this because
almost everyone uses the SHA1DC code instead, but it still shows up for
some people.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 9 Mar 2022 23:32:56 +0000 (15:32 -0800)]
Merge branch 'pw/single-key-interactive' into pw/add-p-single-key
* pw/single-key-interactive:
add -p: disable stdin buffering when interactive.singlekey is set
terminal: set VMIN and VTIME in non-canonical mode
terminal: pop signal handler when terminal is restored
terminal: always reset terminal when reading without echo
131b94a10a ("test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on
glibc >= 2.34", 2022-03-04) introduced "local" variables without
declaring them as such. This conflicts with their use in some tests (at
least when running them with dash), leading to test failures in:
Junio C Hamano [Wed, 9 Mar 2022 21:38:24 +0000 (13:38 -0800)]
Merge branch 'ab/help-fixes'
Updates to how command line options to "git help" are handled.
* ab/help-fixes:
help: don't print "\n" before single-section output
help: add --no-[external-commands|aliases] for use with --all
help: error if [-a|-g|-c] and [-i|-m|-w] are combined
help: correct usage & behavior of "git help --all"
help: note the option name on option incompatibility
help.c: split up list_all_cmds_help() function
help tests: test "git" and "git help [-a|-g] spacing
help.c: use puts() instead of printf{,_ln}() for consistency
help doc: add missing "]" to "[-a|--all]"
Junio C Hamano [Wed, 9 Mar 2022 21:38:24 +0000 (13:38 -0800)]
Merge branch 'ab/c99-variadic-macros'
Remove the escape hatch we added when we introduced the weather
balloon to use variadic macros unconditionally, to make it official
that we now have a hard dependency on the feature.
Junio C Hamano [Wed, 9 Mar 2022 21:38:24 +0000 (13:38 -0800)]
Merge branch 'hn/reftable-no-empty-keys'
General clean-up in reftable implementation, including
clarification of the API documentation, tightening the code to
honor documented length limit, etc.
* hn/reftable-no-empty-keys:
reftable: rename writer_stats to reftable_writer_stats
reftable: add test for length of disambiguating prefix
reftable: ensure that obj_id_len is >= 2 on writing
reftable: avoid writing empty keys at the block layer
reftable: add a test that verifies that writing empty keys fails
reftable: reject 0 object_id_len
Documentation: object_id_len goes up to 31
Junio C Hamano [Wed, 9 Mar 2022 21:38:24 +0000 (13:38 -0800)]
Merge branch 'jc/cat-file-batch-commands'
"git cat-file" learns "--batch-command" mode, which is a more
flexible interface than the existing "--batch" or "--batch-check"
modes, to allow different kinds of inquiries made.
Junio C Hamano [Wed, 9 Mar 2022 21:38:23 +0000 (13:38 -0800)]
Merge branch 'pw/xdiff-alloc-fail'
Improve failure case behaviour of xdiff library when memory
allocation fails.
* pw/xdiff-alloc-fail:
xdiff: handle allocation failure when merging
xdiff: refactor a function
xdiff: handle allocation failure in patience diff
xdiff: fix a memory leak
Junio C Hamano [Wed, 9 Mar 2022 21:38:23 +0000 (13:38 -0800)]
Merge branch 'en/present-despite-skipped'
In sparse-checkouts, files mis-marked as missing from the working tree
could lead to later problems. Such files were hard to discover, and
harder to correct. Automatically detecting and correcting the marking
of such files has been added to avoid these problems.
* en/present-despite-skipped:
repo_read_index: add config to expect files outside sparse patterns
Accelerate clear_skip_worktree_from_present_files() by caching
Update documentation related to sparsity and the skip-worktree bit
repo_read_index: clear SKIP_WORKTREE bit from files present in worktree
unpack-trees: fix accidental loss of user changes
t1011: add testcase demonstrating accidental loss of user modifications
Derrick Stolee [Wed, 9 Mar 2022 16:01:43 +0000 (16:01 +0000)]
clone: fail gracefully when cloning filtered bundle
Users can create a new repository using 'git clone <bundle-file>'. The
new "@filter" capability for bundles means that we can generate a bundle
that does not contain all reachable objects, even if the header has no
negative commit OIDs.
It is feasible to think that we could make a filtered bundle work with
the command
git clone --filter=$filter --bare <bundle-file>
or possibly replacing --bare with --no-checkout. However, this requires
having some repository-global config that specifies the specified object
filter and notifies Git about the existence of promisor pack-files.
Without a remote, that is currently impossible.
As a stop-gap, parse the bundle header during 'git clone' and die() with
a helpful error message instead of the current behavior of failing due
to "missing objects".
Most of the existing logic for handling bundle clones actually happens
in fetch-pack.c, but that logic is the same as if the user specified
'git fetch <bundle>', so we want to avoid failing to fetch a filtered
bundle when in an existing repository that has the proper config set up
for at least one remote.
Carefully comment around the test that this is not the desired long-term
behavior of 'git clone' in this case, but instead that we need to do
more work before that is possible.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 9 Mar 2022 16:01:42 +0000 (16:01 +0000)]
bundle: unbundle promisor packs
In order to have a valid pack-file after unbundling a bundle that has
the 'filter' capability, we need to generate a .promisor file. The
bundle does not promise _where_ the objects can be found, but we can
expect that these bundles will be unbundled in repositories with
appropriate promisor remotes that can find those missing objects.
Use the 'git index-pack --promisor=<message>' option to create this
.promisor file. Add "from-bundle" as the message to help anyone diagnose
issues with these promisor packs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 9 Mar 2022 16:01:41 +0000 (16:01 +0000)]
bundle: create filtered bundles
A previous change allowed Git to parse bundles with the 'filter'
capability. Now, teach Git to create bundles with this option.
Some rearranging of code is required to get the option parsing in the
correct spot. There are now two reasons why we might need capabilities
(a new hash algorithm or an object filter) so that is pulled out into a
place where we can check both at the same time.
The --filter option is parsed as part of setup_revisions(), but it
expected the --objects flag, too. That flag is somewhat implied by 'git
bundle' because it creates a pack-file walking objects, but there is
also a walk that walks the revision range expecting only commits. Make
this parsing work by setting 'revs.tree_objects' and 'revs.blob_objects'
before the call to setup_revisions().
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 9 Mar 2022 16:01:40 +0000 (16:01 +0000)]
rev-list: move --filter parsing into revision.c
Now that 'struct rev_info' has a 'filter' member and most consumers of
object filtering are using that member instead of an external struct,
move the parsing of the '--filter' option out of builtin/rev-list.c and
into revision.c.
This use within handle_revision_pseudo_opt() allows us to find the
option within setup_revisions() if the arguments are passed directly. In
the case of a command such as 'git blame', the arguments are first
scanned and checked with parse_revision_opt(), which complains about the
option, so 'git blame --filter=blob:none <file>' does not become valid
with this change.
Some commands, such as 'git diff' gain this option without having it
make an effect. And 'git diff --objects' was already possible, but does
not actually make sense in that builtin.
The key addition that is coming is 'git bundle create --filter=<X>' so
we can create bundles containing promisor packs. More work is required
to make them fully functional, but that will follow.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 9 Mar 2022 16:01:39 +0000 (16:01 +0000)]
bundle: parse filter capability
The v3 bundle format has capabilities, allowing newer versions of Git to
create bundles with newer features. Older versions that do not
understand these new capabilities will fail with a helpful warning.
Create a new capability allowing Git to understand that the contained
pack-file is filtered according to some object filter. Typically, this
filter will be "blob:none" for a blobless partial clone.
This change teaches Git to parse this capability, place its value in the
bundle header, and demonstrate this understanding by adding a message to
'git bundle verify'.
Since we will use gently_parse_list_objects_filter() outside of
list-objects-filter-options.c, make it an external method and move its
API documentation to before its declaration.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a caller to traverse_commit_list() specifies the options for the
--objects flag but does not specify a show_object function pointer, the
result is a segfault. This is currently visible by running 'git bundle
create --objects HEAD'.
We could fix this problem by supplying a no-op callback in
builtin/bundle.c, but that only solves the problem for one builtin,
leaving this segfault open for other callers.
Replace all callers of the show_commit and show_object function pointers
in list-objects.c to call helper functions show_commit() and
show_object() which check that the given context has non-NULL functions
before passing the necessary data. One extra benefit is that it reduces
duplication due to passing ctx->show_data to every caller.
Test that this segfault no longer occurs for 'git bundle'.
Co-authored-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 9 Mar 2022 16:01:37 +0000 (16:01 +0000)]
MyFirstObjectWalk: update recommended usage
The previous change consolidated traverse_commit_list() and
traverse_commit_list_filtered(). This allows us to simplify the
recommended usage in MyFirstObjectWalk.txt to use this new set of
values.
While here, add some clarification on the difference between the two
methods.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all consumers of traverse_commit_list_filtered() populate the
'filter' member of 'struct rev_info', we can drop that parameter from
the method prototype to simplify things. In addition, the only thing
different now between traverse_commit_list_filtered() and
traverse_commit_list() is the presence of the 'omitted' parameter, which
is only non-NULL for one caller. We can consolidate these two methods by
having one call the other and use the simpler form everywhere the
'omitted' parameter would be NULL.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 9 Mar 2022 16:01:35 +0000 (16:01 +0000)]
pack-bitmap: drop filter in prepare_bitmap_walk()
Now that all consumers of prepare_bitmap_walk() have populated the
'filter' member of 'struct rev_info', we can drop that extra parameter
from the method and access it directly from the 'struct rev_info'.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 9 Mar 2022 16:01:34 +0000 (16:01 +0000)]
pack-objects: use rev.filter when possible
In builtin/pack-objects.c, we use a 'filter_options' global to populate
the --filter=<X> argument. The previous change created a pointer to a
filter option in 'struct rev_info', so we can use that pointer here as a
start to simplifying some usage of object filters.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
