Johannes Sixt [Sun, 26 Sep 2021 10:05:11 +0000 (03:05 -0700)]
lazyload.h: fix warnings about mismatching function pointer types
Here, GCC warns about every use of the INIT_PROC_ADDR macro, for example:
In file included from compat/mingw.c:8:
compat/mingw.c: In function 'mingw_strftime':
compat/win32/lazyload.h:38:12: warning: assignment to
'size_t (*)(char *, size_t, const char *, const struct tm *)'
{aka 'long long unsigned int (*)(char *, long long unsigned int,
const char *, const struct tm *)'} from incompatible pointer type
'FARPROC' {aka 'long long int (*)()'} [-Wincompatible-pointer-types]
38 | (function = get_proc_addr(&proc_addr_##function))
| ^
compat/mingw.c:1014:6: note: in expansion of macro 'INIT_PROC_ADDR'
1014 | if (INIT_PROC_ADDR(strftime))
| ^~~~~~~~~~~~~~
(message wrapped for convenience). Insert a cast to keep the compiler
happy. A cast is fine in these cases because they are generic function
pointer values that have been looked up in a DLL.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in t3705-add-sparse-checkout.sh check to see how 'git add'
behaves with paths outside the sparse-checkout definition. These
currently check to see if a given warning is present but not that the
index is not updated with the sparse entries. Add a new
'test_sparse_entry_unstaged' helper to be sure 'git add' is behaving
correctly.
We need to modify setup_sparse_entry to actually commit the sparse_entry
file so it exists at HEAD and as an entry in the index, but its exact
contents are not staged in the index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2500: add various tests for nuking untracked files
Noting that unpack_trees treats reset=1 & update=1 as license to nuke
untracked files, I looked for code paths that use this combination and
tried to generate testcases which demonstrated unintentional loss of
untracked files and directories. I found several.
I also include testcases for `git reset --{hard,merge,keep}`. A hard
reset is perhaps the most direct test of unpack_tree's reset=1 behavior,
but we cannot make `git reset --hard` preserve untracked files without
some migration work.
Also, the two commands `checkout --force` (because of the --force) and
`read-tree --reset` (because it's plumbing and we need to keep it
backward compatible) were left out as we expect those to continue
removing untracked files and directories.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
54fd3243da ("rebase -i: reread the todo list if `exec` touched it",
2017-04-26) sought to reread the todo list after running an exec
command only if it had been changed. To accomplish this it checks the
stat data of the todo list after running an exec command to see if it
has changed. Unfortunately there are two problems, firstly the
implementation is buggy we actually reread the list after each exec
which is quadratic in the number of commit lookups and secondly the
design is predicated on using nanosecond time stamps which are not the
default.
The implementation bug stems from the fact that we write a new todo
list to disk before running each command but do not update the stat
data to reflect this[1].
The design problem is that it is possible for the user to edit the
todo list without changing its size or inode which means we have to
rely on the mtime to tell us if it has changed. Unfortunately unless
git is built with USE_NSEC it is possible for the original and edited
list to share the same mtime.
Ideally "git rebase --edit-todo" would set a flag that we would then
check in sequencer.c. Unfortunately this is approach will not work as
there are scripts in the wild that write to the todo list directly
without running "git rebase --edit-todo". Instead of relying on stat
data this patch simply reads the possibly edited todo list and
compares it to the original with memcmp(). This is much faster than
reparsing the todo list each time. This patch reduces the time to run
git rebase -r -xtrue v2.32.0~100 v2.32.0
which runs 419 exec commands by 6.6%. For comparison fixing the
implementation bug in stat based approach reduces the time by a
further 1.4% and is indistinguishable from never rereading the todo
list.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is heavily indented and obscures the high level logic within
the loop. Let's move it to its own function before modifying it in the
next commit. Note that there is a subtle change in behavior if the
todo list cannot be reread. Previously todo_list->current was
incremented before returning, now it returns immediately.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This comment added in dfea575017 (Makefile: lazily compute header
dependencies, 2010-01-26) has been out of date since 92b88eba9f (Makefile: use `git ls-files` to list header files, if
possible, 2019-03-04), when we did exactly what it tells us not to do
and added $(GENERATED_H) to $(OBJECTS) dependencies.
The rest of it was also somewhere between inaccurate and outdated,
since as of b8ba629264 (Makefile: fold MISC_H into LIB_H, 2012-06-20)
it's not followed by a list of header files, that got moved earlier in
the file into LIB_H in 60d24dd255 (Makefile: fold XDIFF_H and VCSSVN_H
into LIB_H, 2012-07-06).
Let's just remove it entirely, to the extent that we have anything
useful to say here the comment on the
"USE_COMPUTED_HEADER_DEPENDENCIES" variable a few lines above this
change does the job for us.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: don't perform "mv $@+ $@" dance for $(GENERATED_H)
Change the "cmd.sh > $@+ && mv $@+ $@" pattern used for generating the
config-list.h and command-list.h to just "cmd.sh >$@". This was needed
as a guard to ensure that we don't have an empty file if the script
failed, but since 7b76d6bf221 (Makefile: add and use the
".DELETE_ON_ERROR" flag, 2021-06-29) GNU make ensures that doesn't
happen.
There's still a lot of other places in the Makefile where we
needlessly use this pattern, but I'm just changing these because I'm
about to add a new $(GENERATED_H) target, let's have them all look and
act the same way.
Even with ".DELETE_ON_ERROR" there is still a point to using the "mv
$@+ $@" pattern in some cases, e.g. to ensure that you have a working
binary during recompilation (see [1] for the start of a long
discussion about that), but that doesn't apply here. Nothing external
uses $(GENERATED_H) directly, it's only ever used in the context of
the Makefile's own dependency (re-)generation.
Change various places that hardcode the names of these two files to
refer to either $(GENERATED_H), or to a new generated-hdrs
target. That target is consistent with the *-objs targets I recently
added in 029bac01a8 (Makefile: add {program,xdiff,test,git,fuzz}-objs
& objects targets, 2021-02-23).
A subsequent commit will add a new generated hook-list.h. By doing
this refactoring we'll only need to add the new file to the
GENERATED_H variable, not EXCEPT_HDRS, the vcbuild/README etc.
Hardcoding command-list.h there seems to have been a case of
copy/paste programming in 976aaedca0 (msvc: add a Makefile target to
pre-generate the Visual Studio solution, 2019-07-29). The
config-list.h was added later in 709df95b78 (help: move
list_config_help to builtin/help, 2020-04-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in 44c9e8594e (Fix up header file dependencies and add
sparse checking rules, 2005-07-03), we never marked the phony "check"
target as such.
Perhaps we should just remove it, since as of a combination of 912f9980d2 (Makefile: help people who run 'make check' by mistake,
2008-11-11) 0bcd9ae85d (sparse: Fix errors due to missing
target-specific variables, 2011-04-21) we've been suggesting the user
run "make sparse" directly.
But under that mode it still does something, as well as directing the
user to run "make test" under non-sparse. So let's punt that and
narrowly fix the PHONY bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bundle: remove ignored & undocumented "--verbose" flag
In 73c3253d75e (bundle: framework for options before bundle file,
2019-11-10) the "git bundle" command was refactored to use
parse_options(). In that refactoring it started understanding the
"--verbose" flag before the subcommand, e.g.:
git bundle --verbose verify --quiet
However, nothing ever did anything with this "verbose" variable, and
the change wasn't documented. It appears to have been something that
escaped the lab, and wasn't flagged by reviewers at the time. Let's
just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 23 Sep 2021 20:44:48 +0000 (13:44 -0700)]
Merge branch 'cb/unix-sockets-with-windows'
Adjust credential-cache helper to Windows.
* cb/unix-sockets-with-windows:
git-compat-util: include declaration for unix sockets in windows
credential-cache: check for windows specific errors
t0301: fixes for windows compatibility
Junio C Hamano [Thu, 23 Sep 2021 20:44:48 +0000 (13:44 -0700)]
Merge branch 'ab/retire-option-argument'
An oddball OPTION_ARGUMENT feature has been removed from the
parse-options API.
* ab/retire-option-argument:
parse-options API: remove OPTION_ARGUMENT feature
difftool: use run_command() API in run_file_diff()
difftool: prepare "diff" cmdline in cmd_difftool()
difftool: prepare "struct child_process" in cmd_difftool()
Junio C Hamano [Thu, 23 Sep 2021 20:44:48 +0000 (13:44 -0700)]
Merge branch 'mr/bisect-in-c-4'
Rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--bisect-next-check` subcommand
bisect--helper: reimplement `bisect_run` shell function in C
bisect--helper: reimplement `bisect_visualize()` shell function in C
run-command: make `exists_in_PATH()` non-static
t6030-bisect-porcelain: add test for bisect visualize
t6030-bisect-porcelain: add tests to control bisect run exit cases
Junio C Hamano [Thu, 23 Sep 2021 20:44:47 +0000 (13:44 -0700)]
Merge branch 'ab/http-drop-old-curl-plus'
Conditional compilation around versions of libcURL has been
straightened out.
* ab/http-drop-old-curl-plus:
http: don't hardcode the value of CURL_SOCKOPT_OK
http: centralize the accounting of libcurl dependencies
http: correct curl version check for CURLOPT_PINNEDPUBLICKEY
http: correct version check for CURL_HTTP_VERSION_2
http: drop support for curl < 7.18.0 (again)
Makefile: drop support for curl < 7.9.8 (again)
INSTALL: mention that we need libcurl 7.19.4 or newer to build
INSTALL: reword and copy-edit the "libcurl" section
INSTALL: don't mention the "curl" executable at all
Replace a handcrafted data structure used to keep track of bad
objects in the packfile API by an oidset.
* rs/packfile-bad-object-list-in-oidset:
packfile: use oidset for bad objects
packfile: convert has_packed_and_bad() to object_id
packfile: convert mark_bad_packed_object() to object_id
midx: inline nth_midxed_pack_entry()
oidset: make oidset_size() an inline function
tests: add a test mode for SANITIZE=leak, run it in CI
While git can be compiled with SANITIZE=leak, we have not run
regression tests under that mode. Memory leaks have only been fixed as
one-offs without structured regression testing.
This change adds CI testing for it. We'll now build and small set of
whitelisted t00*.sh tests under Linux with a new job called
"linux-leaks".
The CI target uses a new GIT_TEST_PASSING_SANITIZE_LEAK=true test
mode. When running in that mode, we'll assert that we were compiled
with SANITIZE=leak. We'll then skip all tests, except those that we've
opted-in by setting "TEST_PASSES_SANITIZE_LEAK=true".
A test setting "TEST_PASSES_SANITIZE_LEAK=true" setting can in turn
make use of the "SANITIZE_LEAK" prerequisite, should they wish to
selectively skip tests even under
"GIT_TEST_PASSING_SANITIZE_LEAK=true". In the preceding commit we
started doing this in "t0004-unwritable.sh" under SANITIZE=leak, now
it'll combine nicely with "GIT_TEST_PASSING_SANITIZE_LEAK=true".
This is how tests that don't set "TEST_PASSES_SANITIZE_LEAK=true" will
be skipped under GIT_TEST_PASSING_SANITIZE_LEAK=true:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0001-init.sh
1..0 # SKIP skip all tests in t0001 under SANITIZE=leak, TEST_PASSES_SANITIZE_LEAK not set
The intent is to add more TEST_PASSES_SANITIZE_LEAK=true annotations
as follow-up change, but let's start small to begin with.
In ci/run-build-and-tests.sh we make use of the default "*" case to
run "make test" without any GIT_TEST_* modes. SANITIZE=leak is known
to fail in combination with GIT_TEST_SPLIT_INDEX=true in
t0016-oidmap.sh, and we're likely to have other such failures in
various GIT_TEST_* modes. Let's focus on getting the base tests
passing, we can expand coverage to GIT_TEST_* modes later.
It would also be possible to implement a more lightweight version of
this by only relying on setting "LSAN_OPTIONS". See
<YS9OT/pn5rRK9cGB@coredump.intra.peff.net>[1] and
<YS9ZIDpANfsh7N+S@coredump.intra.peff.net>[2] for a discussion of
that. I've opted for this approach of adding a GIT_TEST_* mode instead
because it's consistent with how we handle other special test modes.
Being able to add a "!SANITIZE_LEAK" prerequisite and calling
"test_done" early if it isn't satisfied also means that we can more
incrementally add regression tests without being forced to fix
widespread and hard-to-fix leaks at the same time.
We have tests that do simple checking of some tool we're interested
in, but later on in the script might be stressing trace2, or common
sources of leaks like "git log" in combination with the tool (e.g. the
commit-graph tests). To be clear having a prerequisite could also be
accomplished by using "LSAN_OPTIONS" directly.
On the topic of "LSAN_OPTIONS": It would be nice to have a mode to
aggregate all failures in our various scripts, see [2] for a start at
doing that which sets "log_path" in "LSAN_OPTIONS". I've punted on
that for now, it can be added later.
As of writing this we've got major regressions between master..seen,
i.e. the t000*.sh tests and more fixed since 31f9acf9ce2 (Merge branch
'ah/plugleaks', 2021-08-04) have regressed recently.
See the discussion at <87czsv2idy.fsf@evledraar.gmail.com>[3] about
the lack of this sort of test mode, and 0e5bba53af (add UNLEAK
annotation for reducing leak false positives, 2017-09-08) for the
initial addition of SANITIZE=leak.
See also 09595ab381 (Merge branch 'jk/leak-checkers', 2017-09-19), 7782066f67 (Merge branch 'jk/apache-lsan', 2019-05-19) and the recent 936e58851a (Merge branch 'ah/plugleaks', 2021-05-07) for some of the
past history of "one-off" SANITIZE=leak (and more) fixes.
As noted in [5] we can't support this on OSX yet until Clang 14 is
released, at that point we'll probably want to resurrect that
"osx-leaks" job.
Makefile: add SANITIZE=leak flag to GIT-BUILD-OPTIONS
When SANITIZE=leak is specified we'll now add a SANITIZE_LEAK flag to
GIT-BUILD-OPTIONS, this can then be picked up by the test-lib.sh,
which sets a SANITIZE_LEAK prerequisite.
We can then skip specific tests that are known to fail under
SANITIZE=leak, add one such annotation to t0004-unwritable.sh, which
now passes under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Thu, 23 Sep 2021 04:12:50 +0000 (21:12 -0700)]
difftool: fix symlink-file writing in dir-diff mode
The difftool dir-diff mode handles symlinks by replacing them with their
readlink(2) values. This allows diff tools to see changes to symlinks
as if they were regular text diffs with the old and new path values.
This is analogous to what "git diff" displays when symlinks change.
The temporary diff directories that are created initially contain
symlinks because they get checked-out using a temporary index that
retains the original symlinks as checked-in to the repository.
A bug was introduced when difftool was rewritten in C that made
difftool write the readlink(2) contents into the pointed-to file rather
than the symlink itself. The write was going through the symlink and
writing to its target rather than writing to the symlink path itself.
Replace symlinks with raw text files by unlinking the symlink path
before writing the readlink(2) content into them.
When 18ec800512 (difftool: handle modified symlinks in dir-diff mode,
2017-03-15) added handling for modified symlinks this bug got recorded
in the test suite. The tests included the pointed-to symlink target
paths. These paths were being reported because difftool was erroneously
writing to them, but they should have never been reported nor written.
Correct the modified-symlinks test cases by removing the target files
from the expected output.
Add a test to ensure that symlinks are written with the readlink(2)
values and that the target files contain their original content.
Reported-by: Alan Blotz <work@blotz.org> Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help: move column config discovery to help.c library
When a git_config() call was added in dbfae689690 (help: reuse
print_columns() for help -a, 2012-04-13) to read the column config
we'd always use the resulting "colopts" variable.
Then in 63eae83f8f3 (help: add "-a --verbose" to list all commands
with synopsis, 2018-05-20) we started only using the "colopts" config
under "--all" if "--no-verbose" was also given, but the "git_config()"
call was not moved inside the "verbose" branch of the code.
This change effectively does that, we'll only call list_commands()
under "--all --no-verbose", so let's have it look up the config it
needs. See 26c7d067832 (help -a: improve and make --verbose default, 2018-09-29) for another case in help.c where we look up config.
The get_colopts() function is named for consistency with the existing
get_alias() function added in 26c7d067832.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help / completion: make "git help" do the hard work
The "help" builtin has been able to emit configuration variables since e17ca926371 (completion: drop the hard coded list of config vars,
2018-05-26), but it hasn't produced exactly the format the completion
script wanted. Let's do that.
We got partway there in 2675ea1cc0f (completion: use 'sort -u' to
deduplicate config variable names, 2019-08-13) and d9438873c4d (completion: deduplicate configuration sections,
2019-08-13), but after both we still needed some sorting,
de-duplicating and awk post-processing of the list.
We can instead simply do the relevant parsing ourselves (we were doing
most of it already), and call string_list_remove_duplicates() after
already sorting the list, so the caller doesn't need to invoke "sort
-u". The "--config-for-completion" output is the same as before after
being passed through "sort -u".
Then add a new "--config-sections-for-completion" option. Under that
output we'll emit config sections like "alias" (instead of "alias." in
the --config-for-completion output).
We need to be careful to leave the "--config-for-completion" option
compatible with users git, but are still running a shell with an older
git-completion.bash. If we e.g. changed the option name they'd see
messages about git-completion.bash being unable to find the
"--config-for-completion" option.
Such backwards compatibility isn't something we should bend over
backwards for, it's only helping users who:
* Upgrade git
* Are in an old shell
* The git-completion.bash in that shell hasn't cached the old
"--config-for-completion" output already.
But since it's easy in this case to retain compatibility, let's do it,
the older versions of git-completion.bash won't care that the input
they get doesn't change after a "sort -u".
While we're at it let's make "--config-for-completion" die if there's
anything left over in "argc", and do the same in the new
"--config-sections-for-completion" option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help tests: test --config-for-completion option & output
Add a regression test for the --config-for-completion option, this was
tested for indirectly with the test added in 7a09a8f093e (completion:
add tests for 'git config' completion, 2019-08-13), but let's do it
directly here as well.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As preceding commits have incrementally established all of the --all,
--guides, --config and hidden --config-for-completion options are
mutually exclusive. So let's use OPT_CMDMODE() to parse the
command-line instead, and take advantage of its conflicting options
detection.
This is the first command with a hidden CMDMODE, so let's introduce a
OPT_CMDMODE_F() macro to go along with OPT_CMDMODE().
I think this makes the usage information that we emit slightly worse,
e.g. before we'd emit:
$ git help --all --config
fatal: --config and --all cannot be combined
usage: git help [-a|--all] [--[no-]verbose]]
[[-i|--info] [-m|--man] [-w|--web]] [<command>]
or: git help [-g|--guides]
or: git help [-c|--config]
[...]
$
And now:
$ git help --all --config
error: option `config' is incompatible with --all
$
But improving that is a general topic for parse-options.c improvement,
i.e. we should probably emit the full usage in that case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help: correct logic error in combining --all and --guides
The --all and --guides commands could be combined, which wouldn't have
any impact on the output except for:
git help --all --guides --no-verbose
Listing the guide alongside that output was clearly not intended, so
let's error out here. See 002b726a400 (builtin/help.c: add
list_common_guides_help() function, 2013-04-02) for the initial
implementation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help: correct logic error in combining --all and --config
Fix a bug in the --config option that's been there ever since its
introduction in 3ac68a93fd2 (help: add --config to list all available
config, 2018-05-26). Die when --all and --config are combined,
combining them doesn't make sense.
The code for the --config option when combined with an earlier
refactoring done to support the --guide option in 65f98358c0c (builtin/help.c: add --guide option, 2013-04-02) would
cause us to take the "--all" branch early and ignore the --config
option.
Let's instead list these as incompatible, both in the synopsis and
help output, and enforce it in the code itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing test for checking what the --config output added in ac68a93fd2 (help: add --config to list all available config,
2018-05-26) looks like. We should not be emitting anything except
config variables and the brief usage information at the end here.
The second test regexp here might not match three-level variables in
general, as their second level could contain ".", but in this case
we're always emitting what we extract from the documentation, so it's
all strings like:
foo.<name>.bar
If we did introduce something like variable example content here we'd
like this to break, since we'd then be likely to break the
git-completion.bash.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help: correct usage & behavior of "git help --guides"
As noted in 65f98358c0c (builtin/help.c: add --guide option,
2013-04-02) and a133737b809 (doc: include --guide option description
for "git help", 2013-04-02) which introduced the --guide option, it
cannot be combined with e.g. <command>.
Change the command and the "SYNOPSIS" section to reflect that desired
behavior. Now that we assert this in code we don't need to
exhaustively describe the previous confusing behavior in the
documentation either, instead of silently ignoring the provided
argument we'll now error out.
The "We're done. Ignore any remaining args" comment added in 15f7d494380 (builtin/help.c: split "-a" processing into two,
2013-04-02) can now be removed, it's obvious that we're asserting the
behavior with the check of "argc".
The "--config" option is still missing from the synopsis, it will be
added in a subsequent commit where we'll fix bugs in its
implementation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 23 Sep 2021 16:47:05 +0000 (09:47 -0700)]
Merge branch 'jk/grep-haystack-is-read-only' into hm/paint-hits-in-log-grep
* jk/grep-haystack-is-read-only:
grep: store grep_source buffer as const
grep: mark "haystack" buffers as const
grep: stop modifying buffer in grep_source_1()
grep: stop modifying buffer in show_line()
grep: stop modifying buffer in strip_timestamp
Makefile: make COMPUTE_HEADER_DEPENDENCIES=auto work with DEVOPTS=pedantic
The "COMPUTE_HEADER_DEPENDENCIES" feature added in [1] was extended to
use auto-detection in [2], that "auto" detection has always piped
STDERR to /dev/null, so any failures on compilers that didn't support
these GCC flags would silently fall back to
"COMPUTE_HEADER_DEPENDENCIES=no".
Later when -Wpedantic support was added to DEVOPTS in [3] we started
passing -Wpedantic in combination with -Werror to the compiler
here. Note (to the pedantic): [3] actually passed "-pedantic", but it
and "-Wpedantic" are synonyms.
Turning on -Wpedantic in [3] broke the auto-detection, since this
relies on compiling an empty program. GCC would loudly complain on
STDERR:
/dev/null:1: error: ISO C forbids an empty translation unit
[-Werror=pedantic]
cc1: note: unrecognized command-line option
‘-Wno-pedantic-ms-format’ may have been intended to silence
earlier diagnostics
cc1: all warnings being treated as errors
But as that ended up in the "$(dep_check)" variable due to the "2>&1"
in [2] we didn't see it.
Then when [4] made DEVOPTS=pedantic the default specifying
"DEVELOPER=1" would effectively set "COMPUTE_HEADER_DEPENDENCIES=no".
To fix these issues let's unconditionally pass -Wno-pedantic after
$(ALL_CFLAGS), we might get a -Wpedantic via config.mak.dev after, or
the builder might specify it via CFLAGS. In either case this will undo
current and future problems with -Wpedantic.
I think it would make sense to simply remove the "2>&1", it would mean
that anyone using a non-GCC-like compiler would get warnings under
COMPUTE_HEADER_DEPENDENCIES=auto, e.g on AIX's xlc would emit:
/opt/IBM/xlc/13.1.3/bin/.orig/xlc: 1501-208 (S) command option D is missing a subargument
Non-zero 40 exit with COMPUTE_HEADER_DEPENDENCIES=auto, set it to "yes" or "no" to quiet auto-detect
And on Solaris with SunCC:
cc: Warning: Option -x passed to ld, if ld is invoked, ignored otherwise
cc: refused to overwrite input file by output file: /dev/null
cc: Warning: Option -x passed to ld, if ld is invoked, ignored otherwise
cc: refused to overwrite input file by output file: /dev/null
Non-zero 1 exit with COMPUTE_HEADER_DEPENDENCIES=auto, set it to "yes" or "no" to quiet auto-detect
Both could be quieted by setting COMPUTE_HEADER_DEPENDENCIES=no
explicitly, as suggested, but let's see if this'll fix it without
emitting too much noise at those that aren't using "gcc" or "clang".
1. f2fabbf76e4 (Teach Makefile to check header dependencies,
2010-01-26)
2. 111ee18c31f (Makefile: Use computed header dependencies if the
compiler supports it, 2011-08-18)
3. 729b3925ed9 (Makefile: add a DEVOPTS flag to get pedantic
compilation, 2018-07-24)
4. 6a8cbc41bac (developer: enable pedantic by default, 2021-09-03)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "sparse" target and its *.sp dependencies to be
non-.PHONY. Before this change "make sparse" would take ~5s to re-run
all the *.c files through "cgcc", after it it'll create an empty *.sp
file sitting alongside the *.c file, only if the *.c file or its
dependencies are newer than the *.sp is the *.sp re-made.
We ensure that the recursive dependencies are correct by depending on
the *.o file, which in turn will have correct dependencies by either
depending on all header files, or under
"COMPUTE_HEADER_DEPENDENCIES=yes" the headers it needs.
This means that a plain "make sparse" is much slower, as we'll now
need to make the *.o files just to create the *.sp files, but
incrementally creating the *.sp files is *much* faster and less
verbose, it thus becomes viable to run "sparse" along with "all" as
e.g. "git rebase --exec 'make all sparse'".
On my box with -j8 "make sparse" was fast before, or around 5 seconds,
now it only takes that long the first time, and the common case is
<100ms, or however long it takes GNU make to stat the *.sp file and
see that all the corresponding *.c file and its dependencies are
older.
See 0bcd9ae85d7 (sparse: Fix errors due to missing target-specific
variables, 2011-04-21) for the modern implementation of the sparse
target being changed here.
It is critical that we use -Wsparse-error here, otherwise the error
would only show up once, but we'd successfully create the empty *.sp
file, and running a second time wouldn't show the error. I'm therefore
not putting it into SPARSE_FLAGS or SP_EXTRA_FLAGS, it's not optional,
the Makefile logic won't behave properly without it.
Appending to $@ without a move is OK here because we're using the
.DELETE_ON_ERROR Makefile feature. See 7b76d6bf221 (Makefile: add and
use the ".DELETE_ON_ERROR" flag, 2021-06-29). GNU make ensures that on
error this file will be removed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Sep 2021 22:11:53 +0000 (18:11 -0400)]
http: match headers case-insensitively when redacting
When HTTP/2 is in use, we fail to correctly redact "Authorization" (and
other) headers in our GIT_TRACE_CURL output.
We get the headers in our CURLOPT_DEBUGFUNCTION callback, curl_trace().
It passes them along to curl_dump_header(), which in turn checks
redact_sensitive_header(). We see the headers as a text buffer like:
Host: ...
Authorization: Basic ...
After breaking it into lines, we match each header using skip_prefix().
This is case-sensitive, even though HTTP headers are case-insensitive.
This has worked reliably in the past because these headers are generated
by curl itself, which is predictable in what it sends.
But when HTTP/2 is in use, instead we get a lower-case "authorization:"
header, and we fail to match it. The fix is simple: we should match with
skip_iprefix().
Testing is more complicated, though. We do have a test for the redacting
feature, but we don't hit the problem case because our test Apache setup
does not understand HTTP/2. You can reproduce the issue by applying this
on top of the test change in this patch:
- it's not necessarily portable. The http2 apache module might not be
available on all systems. Further, the http2 module isn't compatible
with the prefork mpm, so we have to switch to something else. But we
don't necessarily know what's available. It would be nice if we
could have conditional config, but IfModule only tells us if a
module is already loaded, not whether it is available at all.
This might be a non-issue. The http tests are already optional, and
modern-enough systems may just have both of these. But...
- if we do this, then we'd no longer be testing HTTP/1.1 at all. I'm
not sure how much that matters since it's all handled by curl under
the hood, but I'd worry that some detail leaks through. We'd
probably want two scripts running similar tests, one with HTTP/2 and
one with HTTP/1.1.
- speaking of which, a later test fails with the patch above! The
problem is that it is making sure we used a chunked
transfer-encoding by looking for that header in the trace. But
HTTP/2 doesn't support that, as it has its own streaming mechanisms
(the overall operation works fine; we just don't see the header in
the trace).
Furthermore, even with the changes above, this test still does not
detect the current failure, because we see _both_ HTTP/1.1 and HTTP/2
requests, which confuse it. Quoting only the interesting bits from the
resulting trace file, we first see:
So the client does properly redact there, because we're speaking
HTTP/1.1, and the server indicates it can do the upgrade. And then the
client will make further requests using HTTP/2:
And there we can see that the credential is _not_ redacted. This part of
the test is what gets confused:
# Ensure that there is no "Basic" followed by a base64 string, but that
# the auth details are redacted
! grep "Authorization: Basic [0-9a-zA-Z+/]" trace &&
grep "Authorization: Basic <redacted>" trace
The first grep does not match the un-redacted HTTP/2 header, because
it insists on an uppercase "A". And the second one does find the
HTTP/1.1 header. So as far as the test is concerned, everything is OK,
but it failed to notice the un-redacted lines.
We can make this test (and the other related ones) more robust by adding
"-i" to grep case-insensitively. This isn't really doing anything for
now, since we're not actually speaking HTTP/2, but it future-proofs the
tests for a day when we do (either we add explicit HTTP/2 test support,
or it's eventually enabled by default by our Apache+curl test setup).
And it doesn't hurt in the meantime for the tests to be more careful.
The change to use "grep -i", coupled with the changes to use HTTP/2
shown above, causes the test to fail with the current code, and pass
after this patch is applied.
And finally, there's one other way to demonstrate the issue (and how I
actually found it originally). Looking at GIT_TRACE_CURL output against
github.com, you'll see the unredacted output, even if you didn't set
http.version. That's because setting it is only necessary for curl to
send the extra headers in its HTTP/1.1 request that say "Hey, I speak
HTTP/2; upgrade if you do, too". But for a production site speaking
https, the server advertises via ALPN, a TLS extension, that it supports
HTTP/2, and the client can immediately start using it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib tests: get rid of copy/pasted mock test code
Now that we've split up the write_sub_test_lib_test*() and
run_sub_test_lib_test*() functions let's fix those tests in
t0000-basic.sh that were verbosely copy/pasting earlier tests.
That we caught all of them was asserted with a follow-up change that's
not part of this series[1], we might add such a duplication check at
some later time, but for now let's just one-off remove the duplicate
boilerplate.
Improve the testing for test-lib.sh itself to assert that we have a
exit code of 1, not any non-zero. Improves code added in 0445e6f0a12 (test-lib: '--run' to run only specific tests,
2014-04-30).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib tests: refactor common part of check_sub_test_lib_test*()
Refactor the two check_sub_test_lib_test*() functions to avoid
duplicating the same comparison they did of stdout. This duplication
was initially added when check_sub_test_lib_test_err() was added in 0445e6f0a12 (test-lib: '--run' to run only specific tests,
2014-04-30).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib tests: avoid subshell for "test_cmp" for readability
The use of a sub-shell for running the test_cmp of stdout/stderr for
the test author was introduced in this form in 565b6fa87bb (tests:
refactor mechanics of testing in a sub test-lib, 2012-12-16), but from
looking at the history that seemed to have diligently copied my
original ad-hoc implementation in 7b905119703 (t/t0000-basic.sh: Run
the passing TODO test inside its own test-lib, 2010-08-19).
There's no reason to use a subshell here, we try to avoid it in
general. It also improves readability, if the test fails we print out
the relative path in the trash directory that needs to be looked
at.
Before that was mostly obscured, since the "write_sub_test_lib_test"
will pick the directory for you from the test name.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib tests: don't provide a description for the sub-tests
Change the $test_description provided for the generated subtests to be
constant, since the only purpose of having it is that test-lib.sh will
barf if it isn't supplied.
The other purpose of having it was to effectively split up the test
description between the argument to test_expect_success and the
argument to "write_and_run_sub_test_lib_test". Let's only use one of
the two.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib tests: split up "write and run" into two functions
Refactor the function to write and run tests of the test-lib.sh output
into two functions.
When this was added back in 565b6fa87bb (tests: refactor mechanics of
testing in a sub test-lib, 2012-12-16) there was no reason to do this,
but since we started supporting test arguments in 517cd55fd51 (test-lib: self-test that --verbose works, 2013-06-23)
we've started to write out duplicate tests simply to test different
arguments, now we'll be able to re-use them.
This change doesn't consolidate any of those tests yet, it just makes
it possible to do so. All the changes in t0000-basic.sh are a simple
search-replacement.
Since the _run_sub_test_lib_test_common() function doesn't handle
running the test anymore we can do away with the sub-shell, which was
used to scope an "unset" and "export" shell variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options: properly align continued usage output
Some commands such as "git stash" emit continued options output with
e.g. "git stash -h", because usage_with_options_internal() prefixes
with its own whitespace the resulting output wasn't properly
aligned. Let's account for the added whitespace, which properly aligns
the output.
The "git stash" command has usage output with a N_() translation that
legitimately stretches across multiple lines;
We'd like to have that output aligned with the length of the initial
"git stash " output, but since usage_with_options_internal() adds its
own whitespace prefixing we fell short, before this change we'd emit:
We could also go for an approach where we have the caller support no
padding of their own, i.e. (same as the first example, except for the
padding on the second line):
But to do that we'll need to find the length of "git stash". We can
discover that from the "cmd" in the "struct cmd_struct", but there
might be cases with sub-commands or "git" itself taking arguments that
would make that non-trivial.
Even if it were I still think this approach is better, because this way
we'll get the same legible alignment in the C code. The fact that
usage_with_options_internal() is adding its own prefix padding is an
implementation detail that callers shouldn't need to worry about.
Implementation notes:
We could skip the string_list_split() with a strchr(str, '\n') check,
but we'd then need to duplicate our state machine for strings that do
and don't contain a "\n". It's simpler to just always split into a
"struct string_list", even though the common case is that that "struct
string_list" will contain only one element. This is not
performance-sensitive code.
This change is relatively more complex since I've accounted for making
it future-proof for RTL translation support. Later in
usage_with_options_internal() we have some existing padding code
dating back to d7a38c54a6c (parse-options: be able to generate usages
automatically, 2007-10-15) which isn't RTL-safe, but that code would
be easy to fix. Let's not introduce new RTL translation problems here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
MyFirstContribution: Document --range-diff option when writing v2
In the "Sending v2" section, readers are directed to create v2 patches
without using --range-diff. However, it is customary to include a
range-diff against the v1 patches as a reviewer aid.
Update the "Sending v2" section to suggest a simple workflow that uses
the --range-diff option. Also include some explanation for -v2 and
--range-diff to help the reader understand the importance.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: clean .depend dirs under COMPUTE_HEADER_DEPENDENCIES != yes
Fix a logic error in dfea575017d (Makefile: lazily compute header
dependencies, 2010-01-26) where we'd make whether we cleaned the
.depend dirs contingent on the currently configured
COMPUTE_HEADER_DEPENDENCIES value. Before this running e.g.:
make COMPUTE_HEADER_DEPENDENCIES=yes grep.o
make COMPUTE_HEADER_DEPENDENCIES=no clean
Would leave behind the .depend directory, now it'll be removed.
Normally we'd need to use another variable, but in this case there's
no other uses of $(dep_dirs), as opposed to $(dep_args) which is used
as an argument to $(CC). So just deleting this line makes everything
work correctly.
See http://lore.kernel.org/git/xmqqmto48ufz.fsf@gitster.g for a report
about this issue.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_TEST_INSTALLED was moved from perf-lib.sh to run in df0f5021
(perf-lib.sh: remove GIT_TEST_INSTALLED from perf-lib.sh, 2019-05-07)
and that included a change to how it inspected the existence of a
bin-wrappers directory. However, that included a typo that made the
match of bin-wrappers never work. Specifically, the assignment was
which uses the same variable before it is initialized. By changing it to
mydir_abs_wrappers="$mydir_abs/bin-wrappers"
We can correctly use the bin-wrappers directory.
This is critical to successfully computing performance of commands that
execute subcommands. The bin-wrappers ensure that the --exec-path is set
correctly.
Reported-by: Victoria Dye <vdye@github.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
repository.h: don't use a mix of int and bitfields
Change the bitfield added in 58300f47432 (sparse-index: add
index.sparse config option, 2021-03-30) and 3964fc2aae7 (sparse-index:
add guard to ensure full index, 2021-03-30) to just use an "int"
boolean instead.
It might be smart to optimize the space here in the future, but by
consistently using an "int" we can take its address and pass it to
repo_cfg_bool(), and therefore don't need to handle "sparse_index" as
a special-case when reading the "index.sparse" setting.
There's no corresponding config for "command_requires_full_index", but
let's change it too for consistency and to prevent future bugs
creeping in due to one of these being "unsigned".
Using "int" consistently also prevents subtle bugs or undesired
control flow creeping in here. Before the preceding commit the
initialization of "command_requires_full_index" in
prepare_repo_settings() did nothing, i.e. this:
r->settings.command_requires_full_index = 1
Was redundant to the earlier memset() to -1. Likewise for
"sparse_index" added in 58300f47432 (sparse-index: add index.sparse
config option, 2021-03-30) the code and comment added there was
misleading, we weren't initializing it to off, but re-initializing it
from "1" to "0", and then finally checking the config, and perhaps
setting it to "1" again. I.e. we could have applied this patch before
the preceding commit:
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache & fetch-negotiator: check "enum" values in switch()
Change tweak_untracked_cache() in "read-cache.c" to use a switch() to
have the compiler assert that we checked all possible values in the
"enum untracked_cache_setting" type, and likewise remove the "default"
case in fetch_negotiator_init() in favor of checking for
"FETCH_NEGOTIATION_UNSET" and "FETCH_NEGOTIATION_NONE".
As will be discussed in a subsequent we'll only ever have either of
these set to FETCH_NEGOTIATION_NONE, FETCH_NEGOTIATION_UNSET and
UNTRACKED_CACHE_UNSET within the prepare_repo_settings() function
itself. In preparation for fixing that code let's add a BUG() here to
mark this as unreachable code.
See ad0fb659993 (repo-settings: parse core.untrackedCache, 2019-08-13)
for when the "unset" and "keep" handling for core.untrackedCache was
consolidated, and aaf633c2ad1 (repo-settings: create
feature.experimental setting, 2019-08-13) for the addition of the
"default" pattern in "fetch-negotiator.c".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of the global ignore_untracked_cache_config variable added in dae6c322fa1 (test-dump-untracked-cache: don't modify the untracked
cache, 2016-01-27) we can make use of the new facility to set config
via environment variables added in d8d77153eaf (config: allow
specifying config entries via envvar pairs, 2021-01-12).
It's arguably a bit hacky to use setenv() and getenv() to pass
messages between the same program, but since the test helpers are not
the main intended audience of repo-settings.c I think it's better than
hardcoding the test-only special-case in prepare_repo_settings().
This uses the xsetenv() wrapper added in the preceding commit, if we
don't set these in the environment we'll fail in
t7063-status-untracked-cache.sh, but let's fail earlier anyway if that
were to happen.
This breaks any parent process that's potentially using the
GIT_CONFIG_* and GIT_CONFIG_PARAMETERS mechanism to pass one-shot
config setting down to a git subprocess, but in this case we don't
care about the general case of such potential parents. This process
neither spawns other "git" processes, nor is it interested in other
configuration. We might want to pick up other test modes here, but
those will be passed via GIT_TEST_* environment variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wrapper.c: add x{un,}setenv(), and use xsetenv() in environment.c
Add fatal wrappers for setenv() and unsetenv(). In d7ac12b25d3 (Add
set_git_dir() function, 2007-08-01) we started checking its return
value, and since 48988c4d0c3 (set_git_dir: die when setenv() fails,
2018-03-30) we've had set_git_dir_1() die if we couldn't set it.
Let's provide a wrapper for both, this will be useful in many other
places, a subsequent patch will make another use of xsetenv().
The checking of the return value here is over-eager according to
setenv(3) and POSIX. It's documented as returning just -1 or 0, so
perhaps we should be checking -1 explicitly.
Let's just instead die on any non-zero, if our C library is so broken
as to return something else than -1 on error (and perhaps not set
errno?) the worst we'll do is die with a nonsensical errno value, but
we'll want to die in either case.
Let's make these return "void" instead of "int". As far as I can tell
there's no other x*() wrappers that needed to make the decision of
deviating from the signature in the C library, but since their return
value is only used to indicate errors (so we'd die here), we can catch
unreachable code such as
if (xsetenv(...) < 0)
[...];
I think it would be OK skip the NULL check of the "name" here for the
calls to die_errno(). Almost all of our setenv() callers are taking a
constant string hardcoded in the source as the first argument, and for
the rest we can probably assume they've done the NULL check
themselves. Even if they didn't, modern C libraries are forgiving
about it (e.g. glibc formatting it as "(null)"), on those that aren't,
well, we were about to die anyway. But let's include the check anyway
for good measure.
A rebase started with 'git rebase <A> <B>' is conceptually to first
checkout <B> and run 'git rebase <A>' starting from that state. 'git
rebase --abort' in the middle of such a rebase should take us back to
the state we checked out <B>.
This used to work, even when <B> is a tag that points at a commit,
until Git 2.20.0 when the command was reimplemented in C. The command
now complains that the tag object itself cannot be checked out, which
may be technically correct but is not what the user asked to do.
Fix this old regression by using lookup_commit_reference_by_name()
when parsing <B>. The scripted version did not need to peel the tag
because the commands it passed the tag to (e.g 'git reset') peeled the
tag themselves.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
peel_committish() appears to have been copied from the scripted rebase
but it duplicates the functionality of
lookup_commit_reference_by_name() so lets use that instead.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses −1 to signal an error. The builtin rebase converts these to
+1 all over the place using !! (presumably because the in the scripted
version an error was signalled by +1). This is confusing and clutters
the code, we only need to convert the value when the function returns.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 21 Sep 2021 03:51:28 +0000 (23:51 -0400)]
grep: store grep_source buffer as const
Our grep_buffer() function takes a non-const buffer, which is confusing:
we don't take ownership of nor write to the buffer.
This mostly comes from the fact that the underlying grep_source struct
in which we store the buffer uses non-const pointer. The memory pointed
to by the struct is sometimes owned by us (for FILE or OID sources), and
sometimes not (for BUF sources).
Let's store it as const, which lets us err on the side of caution (i.e.,
the compiler will warn us if any of our code writes to or tries to free
it).
As a result, we must annotate the one place where we do free it by
casting away the constness. But that's a small price to pay for the
extra safety and clarity elsewhere (and indeed, it already had a comment
explaining why GREP_SOURCE_BUF _didn't_ free it).
And then we can mark grep_buffer() as taking a const buffer.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 21 Sep 2021 03:49:49 +0000 (23:49 -0400)]
grep: mark "haystack" buffers as const
When we're grepping in a buffer, we don't need to modify it. So we can
take "const char *" buffers, rather than "char *". This can avoid some
awkward casts in our callers, and make our expectations more clear (we
will not take ownership of the memory, nor will we ever write to it).
These spots don't all necessarily have to be converted at the same time,
but some of them are dependent on others, because we pass
pointers-to-pointers in a few cases. And none of this should change any
behavior, since we're just adding "const" qualifiers (and likewise, the
compiler will let us know if we missed any spots). So it's relatively
low-risk to just do this all at once.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 21 Sep 2021 03:48:44 +0000 (23:48 -0400)]
grep: stop modifying buffer in grep_source_1()
We find the end of each matching line of a buffer, and then temporarily
write a NUL to turn it into a regular C string. But we don't need to do
so, because the only thing we do in the interim is pass the line and its
length (via an "eol" pointer) to match_line(). And that function should
only look at the bytes we passed it, whether it has a terminating NUL or
not.
We can drop this temporary write in order to simplify the code and make
it easier to use const buffers in more of grep.c.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 21 Sep 2021 03:48:09 +0000 (23:48 -0400)]
grep: stop modifying buffer in show_line()
When showing lines via grep (or looking for funcnames), we call
show_line() on a multi-line buffer. It finds the end of line and marks
it with a NUL. However, we don't need to do so, as the resulting line is
only used along with its "eol" marker:
- we pass both to next_match(), which takes care to look at only the
bytes we specified
- we pass the line to output_color() without its matching eol marker.
However, we do use the "match" struct we got from next_match() to
tell it how many bytes to look at (which can never exceed the string
we passed it).
So we can stop setting and restoring this NUL marker. That makes the
code simpler, and will allow us to take a const buffer in a future
patch.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 21 Sep 2021 03:46:56 +0000 (23:46 -0400)]
grep: stop modifying buffer in strip_timestamp
When grepping for headers in commit objects, we receive individual
lines (e.g., "author Name <email> 1234 -0000"), and then strip off the
timestamp to do our match. We do so by writing a NUL byte over the
whitespace separator, and then remembering to restore it later.
We had to do it this way when this was added back in a4d7d2c6db (log
--author/--committer: really match only with name part, 2008-09-04),
because we fed the result directly to regexec(), which expects a
NUL-terminated string. But since b7d36ffca0 (regex: use regexec_buf(),
2016-09-21), we have a function which can match part of a buffer.
So instead of modifying the string, we can instead just move the "eol"
pointer, and the rest of the code will do the right thing. This will let
further patches mark more buffers as "const".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as the previous patch, let sub-commands which
support showing or hiding a progress meter handle parsing the
`--progress` or `--no-progress` option, but do not expose it as an
option to the top-level `multi-pack-index` builtin.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 20 Sep 2021 22:20:45 +0000 (15:20 -0700)]
Merge branch 'rs/no-mode-to-open-when-appending'
The "mode" word is useless in a call to open(2) that does not
create a new file. Such a call in the files backend of the ref
subsystem has been cleaned up.
* rs/no-mode-to-open-when-appending:
refs/files-backend: remove unused open mode parameter
Junio C Hamano [Mon, 20 Sep 2021 22:20:45 +0000 (15:20 -0700)]
Merge branch 'js/run-command-close-packs'
The run-command API has been updated so that the callers can easily
ask the file descriptors open for packfiles to be closed immediately
before spawning commands that may trigger auto-gc.
* js/run-command-close-packs:
Close object store closer to spawning child processes
run_auto_maintenance(): implicitly close the object store
run-command: offer to close the object store before running
run-command: prettify the `RUN_COMMAND_*` flags
pull: release packs before fetching
commit-graph: when closing the graph, also release the slab
Junio C Hamano [Mon, 20 Sep 2021 22:20:44 +0000 (15:20 -0700)]
Merge branch 'ds/mergies-with-sparse-index'
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
Junio C Hamano [Mon, 20 Sep 2021 22:20:44 +0000 (15:20 -0700)]
Merge branch 'ds/sparse-index-ignored-files'
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
Junio C Hamano [Mon, 20 Sep 2021 22:20:43 +0000 (15:20 -0700)]
Merge branch 'ab/make-tags-cleanup'
Build clean-up for "make tags" and friends.
* ab/make-tags-cleanup:
Makefile: normalize clobbering & xargs for tags targets
Makefile: remove "cscope.out", not "cscope*" in cscope.out target
Makefile: don't use "FORCE" for tags targets
Makefile: add QUIET_GEN to "cscope" target
Makefile: move ".PHONY: cscope" near its target
Junio C Hamano [Mon, 20 Sep 2021 22:20:43 +0000 (15:20 -0700)]
Merge branch 'ab/serve-cleanup'
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
Junio C Hamano [Mon, 20 Sep 2021 22:20:42 +0000 (15:20 -0700)]
Merge branch 'ab/unbundle-progress'
Add progress display to "git bundle unbundle".
* ab/unbundle-progress:
bundle: show progress on "unbundle"
index-pack: add --progress-title option
bundle API: change "flags" to be "extra_index_pack_args"
bundle API: start writing API documentation
Junio C Hamano [Mon, 20 Sep 2021 22:20:42 +0000 (15:20 -0700)]
Merge branch 'tb/pack-finalize-ordering'
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
Junio C Hamano [Mon, 20 Sep 2021 22:20:41 +0000 (15:20 -0700)]
Merge branch 'ab/progress-users-adjust-counters'
The code to show progress indicator in a few code paths did not
cover between 0-100%, which has been corrected.
* ab/progress-users-adjust-counters:
entry: show finer-grained counter in "Filtering content" progress line
commit-graph: fix bogus counter in "Scanning merged commits" progress line
Junio C Hamano [Mon, 20 Sep 2021 22:20:41 +0000 (15:20 -0700)]
Merge branch 'dt/submodule-diff-fixes'
"git diff --submodule=diff" showed failure from run_command() when
trying to run diff inside a submodule, when the user manually
removes the submodule directory.
* dt/submodule-diff-fixes:
diff --submodule=diff: don't print failure message twice
diff --submodule=diff: do not fail on ever-initialied deleted submodules
t4060: remove unused variable
Junio C Hamano [Mon, 20 Sep 2021 22:20:40 +0000 (15:20 -0700)]
Merge branch 'lh/systemd-timers'
"git maintenance" scheduler learned to use systemd timers as a
possible backend.
* lh/systemd-timers:
maintenance: add support for systemd timers on Linux
maintenance: `git maintenance run` learned `--scheduler=<scheduler>`
cache.h: Introduce a generic "xdg_config_home_for(…)" function
Junio C Hamano [Mon, 20 Sep 2021 22:20:40 +0000 (15:20 -0700)]
Merge branch 'ab/tr2-leaks-and-fixes'
The tracing of process ancestry information has been enhanced.
* ab/tr2-leaks-and-fixes:
tr2: log N parent process names on Linux
tr2: do compiler enum check in trace2_collect_process_info()
tr2: leave the parent list empty upon failure & don't leak memory
tr2: stop leaking "thread_name" memory
tr2: clarify TRACE2_PROCESS_INFO_EXIT comment under Linux
tr2: remove NEEDSWORK comment for "non-procfs" implementations
The code to make "git grep" recurse into submodules has been
updated to migrate away from the "add submodule's object store as
an alternate object store" mechanism (which is suboptimal).
* jt/grep-wo-submodule-odb-as-alternate:
t7814: show lack of alternate ODB-adding
submodule-config: pass repo upon blob config read
grep: add repository to OID grep sources
grep: allocate subrepos on heap
grep: read submodule entry with explicit repo
grep: typesafe versions of grep_source_init
grep: use submodule-ODB-as-alternate lazy-addition
submodule: lazily add submodule ODBs as alternates
Junio C Hamano [Mon, 20 Sep 2021 22:20:39 +0000 (15:20 -0700)]
Merge branch 'tb/multi-pack-bitmaps'
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
Junio C Hamano [Mon, 20 Sep 2021 22:20:39 +0000 (15:20 -0700)]
Merge branch 'ps/fetch-optim'
Optimize code that handles large number of refs in the "git fetch"
code path.
* ps/fetch-optim:
fetch: avoid second connectivity check if we already have all objects
fetch: merge fetching and consuming refs
fetch: refactor fetch refs to be more extendable
fetch-pack: optimize loading of refs via commit graph
connected: refactor iterator to return next object ID directly
fetch: avoid unpacking headers in object existence check
fetch: speed up lookup of want refs via commit-graph
projects / thirdparty / git.git / log
