Jeff King [Mon, 20 Sep 2021 19:04:10 +0000 (15:04 -0400)]
clone: handle unborn branch in bare repos
When cloning a repository with an unborn HEAD, we'll set the local HEAD
to match it only if the local repository is non-bare. This is
inconsistent with all other combinations:
remote HEAD | local repo | local HEAD
-----------------------------------------------
points to commit | non-bare | same as remote
points to commit | bare | same as remote
unborn | non-bare | same as remote
unborn | bare | local default
So I don't think this is some clever or subtle behavior, but just a bug
in 4f37d45706 (clone: respect remote unborn HEAD, 2021-02-05). And it's
easy to see how we ended up there. Before that commit, the code to set
up the HEAD for an empty repo was guarded by "if (!option_bare)". That's
because the only thing it did was call install_branch_config(), and we
don't want to do so for a bare repository (unborn HEAD or not).
That commit put the handling of unborn HEADs into the same block, since
those also need to call install_branch_config(). But the unborn case has
an additional side effect of calling create_symref(), and we want that
to happen whether we are bare or not.
This patch just pulls all of the "figure out the default branch" code
out of the "!option_bare" block. Only the actual config installation is
kept there.
Note that this does mean we might allocate "ref" and not use it (if the
remote is empty but did not advertise an unborn HEAD). But that's not
really a big deal since this isn't a hot code path, and it keeps the
code simple. The alternative would be handling unborn_head_target
separately, but that gets confusing since its memory ownership is
tangled up with the "ref" variable.
There's just one new test, for the case we're fixing. The other ones in
the table are handled elsewhere (the unborn non-bare case just above,
and the actually-born cases in t5601, t5606, and t5609, as they do not
require v2's "unborn" protocol extension).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 20 Sep 2021 18:42:34 +0000 (11:42 -0700)]
Merge branch 'ab/retire-option-argument' into da/difftool
* ab/retire-option-argument:
parse-options API: remove OPTION_ARGUMENT feature
difftool: use run_command() API in run_file_diff()
difftool: prepare "diff" cmdline in cmd_difftool()
difftool: prepare "struct child_process" in cmd_difftool()
Taylor Blau [Sat, 18 Sep 2021 16:02:37 +0000 (12:02 -0400)]
builtin/commit-graph.c: don't accept common --[no-]progress
In 84e4484f12 (commit-graph: use parse_options_concat(), 2021-08-23) we
unified common options of commit-graph's subcommands into a single
"common_opts" array.
But 84e4484f12 introduced a behavior change which is to accept the
"--[no-]progress" option before any sub-commands, e.g.,
git commit-graph --progress write ...
Prior to that commit, the above would error out with "unknown option".
There are two issues with this behavior change. First is that the
top-level --[no-]progress is not always respected. This is because
isatty(2) is performed in the sub-commands, which unconditionally
overwrites any --[no-]progress that was given at the top-level.
But the second issue is that the existing sub-commands of commit-graph
only happen to both have a sensible interpretation of what `--progress`
or `--no-progress` means. If we ever added a sub-command which didn't
have a notion of progress, we would be forced to ignore the top-level
`--[no-]progress` altogether.
Since we haven't released a version of Git that supports --[no-]progress
as a top-level option for `git commit-graph`, let's remove it.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration option `rebase.forkpoint' is only mentioned in the man
page of git-config(1). Since it is a configuration for rebase, mention
it in the documentation of rebase at the --fork-point/--no-fork-point
section. This will help users set a preferred default for their
workflow.
Signed-off-by: Wesley Schwengle <wesley@opperschaap.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Mon, 20 Sep 2021 15:36:17 +0000 (15:36 +0000)]
run-command: create start_bg_command
Create a variation of `run_command()` and `start_command()` to launch a command
into the background and optionally wait for it to become "ready" before returning.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Mon, 20 Sep 2021 15:36:16 +0000 (15:36 +0000)]
simple-ipc/ipc-win32: add Windows ACL to named pipe
Set an ACL on the named pipe to allow the well-known group EVERYONE
to read and write to the IPC server's named pipe. In the event that
the daemon was started with elevation, allow non-elevated clients
to communicate with the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
simple-ipc: move definition of ipc_active_state outside of ifdef
Move the declartion of the `enum ipc_active_state` type outside of
the SUPPORTS_SIMPLE_IPC ifdef.
A later commit will introduce the `fsmonitor_ipc__*()` API and stub in
a "mock" implementation that requires this enum in some function
signatures.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Mon, 20 Sep 2021 15:36:13 +0000 (15:36 +0000)]
simple-ipc: preparations for supporting binary messages.
Add `command_len` argument to the Simple IPC API.
In my original Simple IPC API, I assumed that the request would always
be a null-terminated string of text characters. The `command`
argument was just a `const char *`.
I found a caller that would like to pass a binary command to the
daemon, so I am amending the Simple IPC API to receive `const char
*command, size_t command_len` arguments.
I considered changing the `command` argument to be a `void *`, but the
IPC layer simply passes it to the pkt-line layer which takes a `const
char *`, so to avoid confusion I left it as is.
Note, the response side has always been a `struct strbuf` which
includes the buffer and length, so we already support returning a
binary answer. (Yes, it feels a little weird returning a binary
buffer in a `strbuf`, but it works.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Mon, 20 Sep 2021 15:36:12 +0000 (15:36 +0000)]
trace2: add trace2_child_ready() to report on background children
Create "child_ready" event to capture the state of a child process
created in the background.
When a child command is started a "child_start" event is generated in
the Trace2 log. For normal synchronous children, a "child_exit" event
is later generated when the child exits or is terminated. The two events
include information, such as the "child_id" and "pid", to allow post
analysis to match-up the command line and exit status.
When a child is started in the background (and may outlive the parent
process), it is not possible for the parent to emit a "child_exit"
event. Create a new "child_ready" event to indicate whether the
child was successfully started. Also include the "child_id" and "pid"
to allow similar post processing.
This will be used in a later commit with the new "start_bg_command()".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Fri, 17 Sep 2021 21:21:29 +0000 (17:21 -0400)]
t5326: test propagating hashcache values
Now that we both can propagate values from the hashcache, and respect
the configuration to enable the hashcache at all, test that both of
these function correctly by hardening their behavior with a test.
Like the hash-cache in classic single-pack bitmaps, this helps more
proportionally the more up-to-date your bitmap coverage is. When our
bitmap coverage is out-of-date with the ref tips, we spend more time
proportionally traversing, and all of that traversal gets the name-hash
filled in.
But for the up-to-date bitmaps, this helps quite a bit. These numbers
are on git.git, with `pack.threads=1` to help see the difference
reflected in the overall runtime.
Test origin/tb/multi-pack-bitmaps HEAD
-------------------------------------------------------------------------------------
5326.4: simulated clone 1.87(1.80+0.07) 1.46(1.42+0.03) -21.9%
5326.5: simulated fetch 2.66(2.61+0.04) 1.47(1.43+0.04) -44.7%
5326.6: pack to file (bitmap) 2.74(2.62+0.12) 1.89(1.82+0.07) -31.0%
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Fri, 17 Sep 2021 21:21:27 +0000 (17:21 -0400)]
p5326: generate pack bitmaps before writing the MIDX bitmap
To help test the performance of permuting the contents of the hash-cache
when generating a MIDX bitmap, we need a bitmap which has its hash-cache
populated.
And since multi-pack bitmaps don't add *new* values to the hash-cache,
we have to rely on a single-pack bitmap to generate those values for us.
Therefore, generate a pack bitmap before the MIDX one in order to ensure
that the MIDX bitmap has entries in its hash-cache. Since we don't want
to time generating the pack bitmap, move that to a non-perf test run
before we try to generate the MIDX bitmap.
Likewise, get rid of the pack bitmap afterwords, to make certain that we
are not accidentally using it in the performance tests run later on.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of crypt(3) will return NULL when passed an unsupported
hash type (ex: OpenBSD with DES), so check for undef instead of using
it directly.
Also use this to probe the system and select a better hash function in
the tests, so it can pass successfully.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
[jc: <CAPUEspjqD5zy8TLuFA96usU7FYi=0wF84y7NgOVFqegtxL9zbw@mail.gmail.com>] Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsserver: use crypt correctly to compare password hashes
c057bad370 (git-cvsserver: use a password file cvsserver pserver,
2010-05-15) adds a way for `git cvsserver` to provide authenticated
pserver accounts without having clear text passwords, but uses the
username instead of the password to the call for crypt(3).
Correct that, and make sure the documentation correctly indicates how
to obtain hashed passwords that could be used to populate this
configuration, as well as correcting the hash that was used for the
tests.
This change will require that any user of this feature updates the
hashes in their configuration, but has the advantage of using a more
similar format than cvs uses, probably also easying any migration.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
9af0b8dbe2 (t0000-basic: more commit-tree tests., 2006-04-26) adds
tests for commit-tree that mask the return exit from git as described
in a378fee5b07 (Documentation: add shell guidelines, 2018-10-05).
Fix the tests, to avoid pipes by using a temporary file instead.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
b8ba412bf7 (tree-diff: avoid alloca for large allocations, 2016-06-07)
adds a way to route some bigger allocations out of the stack and free
them through the addition of two conveniently named macros, but leaves
the calls to free the xalloca part, which could be also in the heap,
if the system doesn't HAVE_ALLOCA_H (ex: macOS and other BSD).
Add the missing free call, xalloca_free(), which is a noop if we
allocated memory in the stack frame, but a real free() if we
allocated in the heap instead, and while at it, change the expression
to match in both macros for ease of readability.
This avoids a leak reported by LSAN while running t0000 but that
wouldn't fail the test (which is fixed in the next patch):
SUMMARY: LeakSanitizer: 1034 byte(s) leaked in 15 allocation(s).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 15 Sep 2021 20:15:26 +0000 (13:15 -0700)]
Merge branch 'pb/test-use-user-env'
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
Junio C Hamano [Wed, 15 Sep 2021 20:15:26 +0000 (13:15 -0700)]
Merge branch 'jc/trivial-threeway-binary-merge'
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
Jeff King [Wed, 15 Sep 2021 17:24:52 +0000 (13:24 -0400)]
t1400: avoid SIGPIPE race condition on fifo
t1400.190 sometimes fails or even hangs because of the way it uses
fifos. Our goal is to interactively read and write lines from
update-ref, so we have two fifos, in and out. We open a descriptor
connected to "in" and redirect output to that, so that update-ref does
not see EOF as it would if we opened and closed it for each "echo" call.
But we don't do the same for the output. This leads to a race where our
"read response <out" has not yet opened the fifo, but update-ref tries
to write to it and gets SIGPIPE. This can result in the test failing, or
worse, hanging as we wait forever for somebody to write to the pipe.
This is the same proble we fixed in 4783e7ea83 (t0008: avoid SIGPIPE
race condition on fifo, 2013-07-12), and we can fix it the same way, by
opening a second long-running descriptor.
Before this patch, running:
./t1400-update-ref.sh --run=1,190 --stress
failed or hung within a few dozen iterations. After it, I ran it for
several hundred without problems.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 15 Sep 2021 18:59:19 +0000 (11:59 -0700)]
submodule: extract path to submodule gitdir func
We currently store each submodule gitdir in ".git/modules/<name>", but
this has problems with some submodule naming schemes, as described in a
comment in submodule_name_to_gitdir() in this patch.
Extract the determination of the location of a submodule's gitdir into
its own function submodule_name_to_gitdir(). For now, the problem
remains unsolved, but this puts us in a better position for finding a
solution.
This was motivated, at $DAYJOB, by a part of Android's repo hierarchy
[1]. In particular, there is a repo "build", and several repos of the
form "build/<name>".
This is based on earlier work by Brandon Williams [2].
Jeff King [Wed, 15 Sep 2021 18:36:38 +0000 (14:36 -0400)]
ls-refs: reject unknown arguments
The v2 ls-refs command may receive extra arguments from the client, one
per pkt-line. The spec is pretty clear that the arguments must come from
a specified set, but we silently ignore any unknown entries. For a
well-behaved client this doesn't matter, but it makes testing and
debugging more confusing. Let's tighten this up to match the spec.
In theory this liberal behavior _could_ be useful for extending the
protocol. But:
- every other part of the protocol requires that the server first
indicate that it supports the argument; this includes the fetch and
object-info commands, plus the "unborn" capability added to ls-refs
itself
- it's not a very good extension mechanism anyway; without the server
advertising support, clients would have no idea if the argument was
silently ignored, or accepted and simply had no effect
So we're not really losing anything by tightening this.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 15 Sep 2021 18:36:36 +0000 (14:36 -0400)]
serve: reject commands used as capabilities
Our table of v2 "capabilities" contains everything we might tell the
client we support. But there are differences in how we expect the client
to respond. Some of the entries are true capabilities (i.e., we expect
the client to say "yes, I support this"), and some are ones we expect
them to send as commands (with "command=ls-refs" or similar).
When we receive a capability used as a command, we complain about that.
But when we receive a command used as a capability (e.g., just "ls-refs"
in a pkt-line by itself), we silently ignore it.
This isn't really hurting anything (clients shouldn't send it, and we'll
ignore it), but we can tighten up the protocol to match what we expect
to happen.
There are two new tests here. The first one checks a capability used as
a command, which already passes. The second tests a command as a
capability, which this patch fixes.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 15 Sep 2021 18:36:33 +0000 (14:36 -0400)]
serve: reject bogus v2 "command=ls-refs=foo"
When we see a line from the client like "command=ls-refs", we parse
everything after the equals sign as a capability, which we check against
our capabilities table. If we don't recognize the command (e.g.,
"command=foo"), we'll reject it.
But in parse_command(), we use the same get_capability() parser for
parsing non-command lines. So if we see "command=ls-refs=foo", we will
feed "ls-refs=foo" to get_capability(), which will say "OK, that's
ls-refs, with value 'foo'". But then we simply ignore the value
entirely.
The client is violating the spec here, which says:
I.e., the key is not even allowed to have an equals sign in it. Whereas
a real non-command capability does allow a value:
capability = PKT-LINE(key[=value] LF)
So by reusing the same get_capability() parser, we are mixing up the
"key" and "capability" tokens. However, since that parser tells us
whether it saw an "=", we can still use it; we just need to reject any
input that produces a non-NULL value field.
The current behavior isn't really hurting anything (the client should
never send such a request, and if it does, we just ignore the "value"
part). But since it does violate the spec, let's tighten it up to
prevent any surprising behavior.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 15 Sep 2021 18:35:34 +0000 (14:35 -0400)]
docs/protocol-v2: clarify some ls-refs ref-prefix details
We've never documented the fact that a client can provide multiple
ref-prefix capabilities. Let's describe the behavior.
We also never discussed the "best effort" nature of the prefixes. The
client side of git.git has always treated them this way, filtering the
result with local patterns. And indeed any client must do this, because
the prefix patterns are not sufficient to express the usual refspecs
(and so for "foo" we ask for "refs/heads/foo", "refs/tags/foo", and so
on).
So this may be considered a change in the spec with respect to client
expectations / requirements, but it's mostly codifying existing
behavior.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 15 Sep 2021 18:35:31 +0000 (14:35 -0400)]
ls-refs: ignore very long ref-prefix counts
Because each "ref-prefix" capability from the client comes in its own
pkt-line, there's no limit to the number of them that a misbehaving
client may send. We read them all into a strvec, which means the client
can waste arbitrary amounts of our memory by just sending us "ref-prefix
foo" over and over.
One possible solution is to just drop the connection when the limit is
reached. If we set it high enough, then only misbehaving or malicious
clients would hit it. But "high enough" is vague, and it's unfriendly if
we guess wrong and a legitimate client hits this.
But we can do better. Since supporting the ref-prefix capability is
optional anyway, the client has to further cull the response based on
their own patterns. So we can simply ignore the patterns once we cross a
certain threshold. Note that we have to ignore _all_ patterns, not just
the ones past our limit (since otherwise we'd send too little data).
The limit here is fairly arbitrary, and probably much higher than anyone
would need in practice. It might be worth limiting it further, if only
because we check it linearly (so with "m" local refs and "n" patterns,
we do "m * n" string comparisons). But if we care about optimizing this,
an even better solution may be a more advanced data structure anyway.
I didn't bother making the limit configurable, since it's so high and
since Git should behave correctly in either case. It wouldn't be too
hard to do, but it makes both the code and documentation more complex.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 15 Sep 2021 18:35:29 +0000 (14:35 -0400)]
serve: drop "keys" strvec
We collect the set of capabilities the client sends us in a strvec.
While this is usually small, there's no limit to the number of
capabilities the client can send us (e.g., they could just send us
"agent" pkt-lines over and over, and we'd keep adding them to the list).
Since all code has been converted away from using this list, let's get
rid of it. This avoids a potential attack where clients waste our
memory.
Note that we do have to replace it with a flag, because some of the
flush-packet logic checks whether we've seen any valid commands or keys.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 14 Sep 2021 23:51:30 +0000 (19:51 -0400)]
serve: provide "receive" function for session-id capability
Rather than pulling the session-id string from the list of collected
capabilities, we can handle it as soon as we receive it. This gets us
closer to dropping the collected list entirely.
The behavior should be the same, with one exception. Previously if the
client sent us multiple session-id lines, we'd report only the first.
Now we'll pass each one along to trace2. This shouldn't matter in
practice, since clients shouldn't do that (and if they do, it's probably
sensible to log them all).
As this removes the last caller of the static has_capability(), we can
remove it, as well (and in fact we must to avoid -Wunused-function
complaining).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 14 Sep 2021 23:51:27 +0000 (19:51 -0400)]
serve: provide "receive" function for object-format capability
We get any "object-format" specified by the client by searching for it
in the collected list of capabilities the client sent. We can instead
just handle it as soon as they send it. This is slightly more efficient,
and gets us one step closer to dropping that collected list.
Note that we do still have to do our final hash check after receiving
all capabilities (because they might not have sent an object-format line
at all, and we still have to check that the default matches our
repository algorithm). Since the check_algorithm() function would now be
down to a single if() statement, I've just inlined it in its only
caller.
There should be no change of behavior here, except for two
broken-protocol cases:
- if the client sends multiple conflicting object-format capabilities
(which they should not), we'll now choose the last one rather than
the first. We could also detect and complain about the duplicates
quite easily now, which we could not before, but I didn't do so
here.
- if the client sends a bogus "object-format" with no equals sign,
we'll now say so, rather than "unknown object format: ''"
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 14 Sep 2021 22:06:11 +0000 (18:06 -0400)]
p5326: don't set core.multiPackIndex unnecessarily
When this performance test was originally written, `core.multiPackIndex`
was not the default and thus had to be enabled. But now that we have 18e449f86b (midx: enable core.multiPackIndex by default, 2020-09-25), we
no longer need this.
Drop the unnecessary setup (even though it's not hurting anything, it is
unnecessary at best and confusing at worst).
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 14 Sep 2021 22:06:09 +0000 (18:06 -0400)]
p5326: create missing 'perf-tag' tag
Some of the tests in test_full_bitmap rely on having a tag named
perf-tag in place. We could create it in test_full_bitmap(), but we want
to have it in place before the repack starts.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 14 Sep 2021 22:06:06 +0000 (18:06 -0400)]
midx.c: respect 'pack.writeBitmapHashcache' when writing bitmaps
In the previous commit, the bitmap writing code learned to propagate
values from an existing hash-cache extension into the bitmap that it is
writing.
Now that that functionality exists, let's expose it by teaching the 'git
multi-pack-index' builtin to respect the `pack.writeBitmapHashCache`
option so that the hash-cache may be written at all.
Two minor points worth noting here:
- The 'git multi-pack-index write' sub-command didn't previously read
any configuration (instead this is handled in the base command). A
separate handler is added here to respect this write-specific
config option.
- I briefly considered adding a 'bitmap_flags' field to the static
options struct, but decided against it since it would require
plumbing through a new parameter to the write_midx_file() function.
Instead, a new MIDX-specific flag is added, which is translated to
the corresponding bitmap one.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 14 Sep 2021 22:06:04 +0000 (18:06 -0400)]
pack-bitmap.c: propagate namehash values from existing bitmaps
When an old bitmap exists while writing a new one, we load it and build
a "reposition" table which maps bit positions of objects from the old
bitmap to their respective positions in the new bitmap. This can help
when we encounter a commit which was selected in both the old and new
bitmap, since we only need to permute its bit (not recompute it from
scratch).
We do not, however, repurpose existing namehash values in the case of
the hash-cache extension. There has been thus far no good reason to do
so, since all of the namehash values for objects in the new bitmap would
be populated during the traversal that was just performed by
pack-objects when generating single-pack reachability bitmaps.
But this isn't the case for multi-pack bitmaps, which are written via
`git multi-pack-index write --bitmap` and do not perform any traversal.
In this case all namehash values are set to zero, but we don't even
bother to check the `pack.writeBitmapHashcache` option anyway, so it
fails to matter.
There are two approaches we could take to fill in non-zero hash-cache
values:
- have either the multi-pack-index builtin run its own
traversal to attempt to fill in some values, or let a hypothetical
caller (like `pack-objects` when `repack` eventually drives the
`multi-pack-index` builtin) fill in the values they found during
their traversal
- or copy any existing namehash values that were stored in an
existing bitmap to their corresponding positions in the new bitmap
In a system where a repository is generally repacked with `git repack
--geometric=<d>` and occasionally repacked with `git repack -a`, the
hash-cache coverage will tend towards all objects.
Since populating the hash-cache is additive (i.e., doing so only helps
our delta search), any intermediate lack of full coverage is just fine.
So let's start by just propagating any values from the existing
hash-cache if we see one.
The next patch will respect the `pack.writeBitmapHashcache` option while
writing MIDX bitmaps, and then test this new behavior.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 14 Sep 2021 22:06:02 +0000 (18:06 -0400)]
t/helper/test-bitmap.c: add 'dump-hashes' mode
The pack-bitmap writer code is about to learn how to propagate values
from an existing hash-cache. To prepare, teach the test-bitmap helper to
dump the values from a bitmap's hash-cache extension in order to test
those changes.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 14 Sep 2021 15:31:07 +0000 (11:31 -0400)]
serve: add "receive" method for v2 capabilities table
We have a capabilities table that tells us what we should tell the
client we are capable of, and what to do when a client gives us a
particular command (e.g., "command=ls-refs"). But it doesn't tell us
what to do when the client sends us back a capability (e.g.,
"object-format=sha256"). We just collect them all in a strvec and hope
somebody can use them later.
Instead, let's provide a function pointer in the table to act on these.
This will eventually help us avoid collecting the strings, which will be
more efficient and less prone to mischief.
Using the new method is optional, which helps in two ways:
- we can move existing capabilities over to this new system gradually
in individual commits
- some capabilities we don't actually do anything with anyway. For
example, the client is free to say "agent=git/1.2.3" to us, but we
do not act on the information in any way.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 14 Sep 2021 15:30:50 +0000 (11:30 -0400)]
serve: return capability "value" from get_capability()
When the client sends v2 capabilities, they may be simple, like:
foo
or have a value like:
foo=bar
(all of the current capabilities actually expect a value, but the
protocol allows for boolean ones).
We use get_capability() to make sure the client's pktline matches a
capability. In doing so, we parse enough to see the "=" and the value
(if any), but we immediately forget it. Nobody cares for now, because they end
up parsing the values out later using has_capability(). But in
preparation for changing that, let's pass back a pointer so the callers
know what we found.
Note that unlike has_capability(), we'll return NULL for a "simple"
capability. Distinguishing these will be useful for some future patches.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 14 Sep 2021 15:30:20 +0000 (11:30 -0400)]
serve: rename is_command() to parse_command()
The is_command() function not only tells us whether the pktline is a
valid command string, but it also parses out the command (and complains
if we see a duplicate). Let's rename it to make those extra functions
a bit more obvious.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 14 Sep 2021 17:56:05 +0000 (10:56 -0700)]
Merge branch 'ab/serve-cleanup' into jk/reduce-malloc-in-v2-servers
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
documentation: add documentation for 'git version'
While 'git version' is probably the least complex git command,
it is a non-experimental user-facing builtin command. As such
it should have a help page.
Both `git help` and `git version` can be called as options
(`--help`/`--version`) that internally get converted to the
corresponding command. Add a small paragraph to
Documentation/git.txt describing how these two options
interact with each other and link to this help page for the
sub-options that `--version` can take. Well, currently there
is only one sub-option, but that could potentially increase
in future versions of Git.
Signed-off-by: Matthias Aßhauer <mha1993@live.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help: make sure local html page exists before calling external processes
We check that git.html exists, regardless of the page the user wants to open.
Checking whether the requested page exists instead gives us a smoother user
experience in two use cases:
1) The requested page doesn't exist
When calling a git command and there is an error, most users reasonably expect
git to produce an error message on the standard error stream, but in this case
we pass the filepath to git web--browse which passes it on to a browser (or a
helper program like xdg-open or start that should in turn open a browser)
without any error and many GUI based browsers or helpers won't output such a
message onto the standard error stream.
Especially the helper programs tend to show the corresponding error message in
a message box and wait for user input before exiting. This leaves users in
interactive console sessions without an error message in their console,
without a console prompt and without the help page they expected.
2) git.html is missing for some reason, but the user asked for some other page
We currently refuse to show any local html help page when we can't find
git.html. Even if the requested help page exists. If we check for the requested
page instead, we can show the user all available pages and only error out on
those that don't exist.
Signed-off-by: Matthias Aßhauer <mha1993@live.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util: include declaration for unix sockets in windows
Available since Windows 10 release 1803 and Windows Server 2019.
NO_UNIX_SOCKETS is still the default for Windows builds, as they need
to keep backward compatibility with releases up to Windows 7, but allow
including the header otherwise.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
credential-cache: check for windows specific errors
Connect and reset errors aren't what will be expected by POSIX but
are instead compatible with the ones used by WinSock.
To avoid any possibility of confusion with other systems, checks
for disconnection and availability had been abstracted into helper
functions that are platform specific.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future patch that will allow building with
Unix Sockets in Windows, workaround a couple of issues from the
Mingw-W64 compatibility layer.
test -S is not able to detect that a file is a socket, so use
test -e instead (through a library function).
`mkdir -m` can't represent a valid ACL directly and fails with
permission problems, so instead call mkdir followed by chmod, which
has been enhanced to do so.
The last invocation of mkdir would likely need the same treatment
but SYMLINK is unlikely to be enabled on Windows so it has been
punted for now.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 13 Sep 2021 21:23:05 +0000 (22:23 +0100)]
doc: config, tell readers of `git help --config`
The `git help` command gained the ability to list config variables in 3ac68a93fd (help: add --config to list all available config, 2018-05-26)
but failed to tell readers of the config documenation itself.
Provide that cross reference.
Signed-off-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After reimplementation of `git bisect run` in C,
`--bisect-next-check` subcommand is not needed anymore.
Let's remove it from options list and code.
Mentored by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect--helper: reimplement `bisect_visualize()` shell function in C
Reimplement the `bisect_visualize()` shell function
in C and also add `--bisect-visualize` subcommand to
`git bisect--helper` to call it from git-bisect.sh.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `static` keyword from `exists_in_PATH()` function
and declare the function in `run-command.h` file.
The function will be used in bisect_visualize() in a later
commit.
Mentored by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
9512177b68 ("rebase: add --quit to cleanup rebase, leave everything
else untouched", 2016-11-12) seems to have copied the --abort tests
but added two separate tests for the two rebase backends rather than
adding a single test into the existing testrebase() function.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
$dotest holds the name of the rebase state directory and was named
after the state directory used at the time the test was added. As we
no longer use that name rename the variable to reflect its purpose.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the setup by using test_commit. Note that this replaces the
branch "pre-rebase" with a tag of the same name. "pre-rebase" is only
used as a fixed reference point so it makes sense to use a tag rather
than a branch.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 97b88dd58c ("git-rebase.sh: Fix --merge --abort failures when
path contains whitespace", 2008-05-04) started running these tests in
a subdirectory with a space in its name. At that time $TEST_DIRECTORY
did not contain a space but shortly after in 4a7aaccd83 ("Rename the
test trash directory to contain spaces.", 2008-05-04) $TEST_DIRECTORY
was changed to contain a space so we no longer need to run these tests
in a subdirectory.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new git-curl-compat.h header to define CURL_SOCKOPT_OK to its
known value if we're on an older curl version that doesn't have it. It
was hardcoded in http.c in a15d069a198 (http: enable keepalive on TCP
sockets, 2013-10-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: centralize the accounting of libcurl dependencies
As discussed in 644de29e220 (http: drop support for curl < 7.19.4,
2021-07-30) checking against LIBCURL_VERSION_NUM isn't as reliable as
checking specific symbols present in curl, as some distros have been
known to backport features.
However, while some of the curl_easy_setopt() arguments we rely on are
macros, others are enum, and we can't assume that those that are
macros won't change into enums in the future.
So we're still going to have to check LIBCURL_VERSION_NUM, but by
doing that in one central place and using a macro definition of our
own, anyone who's backporting features can define it themselves, and
thus have access to more modern curl features that they backported,
even if they didn't bump the LIBCURL_VERSION_NUM.
More importantly, as shown in a preceding commit doing these version
checks makes for hard to read and possibly buggy code, as shown by the
bug fixed there where we were conflating base 10 for base 16 when
comparing the version.
By doing them all in one place we'll hopefully reduce the chances of
such future mistakes, furthermore it now becomes easier to see at a
glance what the oldest supported version is, which makes it easier to
reason about any future deprecation similar to the recent e48a623dea0 (Merge branch 'ab/http-drop-old-curl', 2021-08-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: correct curl version check for CURLOPT_PINNEDPUBLICKEY
In aeff8a61216 (http: implement public key pinning, 2016-02-15) a
dependency and warning() was added if curl older than 7.44.0 was used,
but the relevant code depended on CURLOPT_PINNEDPUBLICKEY, introduced
in 7.39.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: correct version check for CURL_HTTP_VERSION_2
In d73019feb44 (http: add support selecting http version, 2018-11-08)
a dependency was added on CURL_HTTP_VERSION_2, but this feature was
introduced in curl version 7.43.0, not 7.47.0, as the incorrect
version check led us to believe.
As looking through the history of that commit on the mailing list will
reveal[1], the reason for this is that an earlier version of it
depended on CURL_HTTP_VERSION_2TLS, which was introduced in libcurl
7.47.0.
But the version that made it in in d73019feb44 had dropped the
dependency on CURL_HTTP_VERSION_2TLS, but the corresponding version
check was not corrected.
The newest symbol we depend on is CURL_HTTP_VERSION_2. It was added in
7.33.0, but the CURL_HTTP_VERSION_2 alias we used was added in
7.47.0. So we could support an even older version here, but let's just
correct the checked version.
In 644de29e220 (http: drop support for curl < 7.19.4, 2021-07-30) we
dropped support for curl < 7.19.4, so we can drop support for this
non-obvious dependency on curl < 7.18.0.
It's non-obvious because in curl's hex version notation 0x071800 is
version 7.24.0, *not* 7.18.0, so at a glance this patch looks
incorrect.
But it's correct, because the existing version check being removed
here is wrong. The check guards use of the following curl defines:
I.e. the oldest version that has these is in fact 7.18.0, not
7.24.0. That we were checking 7.24.0 is just an mistake in 6d7afe07f29 (remote-http(s): support SOCKS proxies, 2015-10-26),
i.e. its author confusing base 10 and base 16.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1119a15b5c8 (http: drop support for curl < 7.11.1, 2021-07-30)
support for curl versions older than 7.11.1 was removed, and we
currently require at least version 7.19.4, see 644de29e220 (http: drop
support for curl < 7.19.4, 2021-07-30).
In those changes this Makefile-specific check added in 0890098780f (Decide whether to build http-push in the Makefile,
2005-11-18) was missed, now that we're never going to use such an
ancient curl version we don't need to check that we have at least
7.9.8 here. I have no idea what in http-push.c broke on versions older
than that.
This does not impact "NO_CURL" setups, as this is in the "else" branch
after that check.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
INSTALL: mention that we need libcurl 7.19.4 or newer to build
Without NO_CURL=Y we require at least version "7.19.4" of libcurl, see 644de29e220 (http: drop support for curl < 7.19.4, 2021-07-30). Let's
document this in the "INSTALL" document.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As was noted in 1a85b49b87a (parse-options: make OPT_ARGUMENT() more
useful, 2019-03-14) there's only ever been one user of the
OPT_ARGUMENT(), that user was added in 20de316e334 (difftool: allow
running outside Git worktrees with --no-index, 2019-03-14).
The OPT_ARGUMENT() feature itself was added way back in 580d5bffdea (parse-options: new option type to treat an option-like
parameter as an argument., 2008-03-02), but as discussed in 1a85b49b87a wasn't used until 20de316e334 in 2019.
Now that the preceding commit has migrated this code over to using
"struct strvec" to manage the "args" member of a "struct
child_process", we can just use that directly instead of relying on
OPT_ARGUMENT.
This has a minor change in behavior in that if we'll pass --no-index
we'll now always pass it as the first argument, before we'd pass it in
whatever position the caller did. Preserving this was the real value
of OPT_ARGUMENT(), but as it turns out we didn't need that either. We
can always inject it as the first argument, the other end will parse
it just the same.
Note that we cannot remove the "out" and "cpidx" members of "struct
parse_opt_ctx_t" added in 580d5bffdea, while they were introduced with
OPT_ARGUMENT() we since used them for other things.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool: use run_command() API in run_file_diff()
Change the run_file_diff() function to use the run_command() API
directly, instead of invoking the run_command_v_opt_cd_env() wrapper.
This allows it, like run_dir_diff(), to use the "args" from "struct
strvec", instead of the "const char **argv" passed into
cmd_difftool(). This will be used in the subsequent commit to get rid
of OPT_ARGUMENT() from cmd_difftool().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 13 Sep 2021 03:35:38 +0000 (05:35 +0200)]
difftool: prepare "diff" cmdline in cmd_difftool()
We call into either run_dir_diff() or run_file_diff(), each of which
sets up a child argv starting with "diff" and some hard-coded options
(depending on which mode we're using). Let's extract that logic into the
caller, which will make it easier to modify the options for cases which
affect both functions.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool: prepare "struct child_process" in cmd_difftool()
Move the preparation of the "struct child_process" from run_dir_diff()
to its only caller, cmd_difftool(). This is in preparation for
migrating run_file_diff() to using the run_command() API directly, and
to move more of the shared setup of the two to cmd_difftool().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rev-parse --parseopt tests: add more usagestr tests
Add tests for the "usagestr" passed to parse-options.c
usage_with_options_internal() through cmd_parseopt().
These test for edge cases in the existing behavior related to the
"--parseopt" interface doing its own line-splitting with
strbuf_getline(), and the native C interface expecting and potentially
needing to handle newlines within the strings in the array it
accepts. The results are probably something that wasn't anticipated,
but let's make sure we stay backwards compatible with it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-pack: properly use parse_options() API for usage string
When "send-pack" was changed to use the parse_options() API in 068c77a5189 (builtin/send-pack.c: use parse_options API, 2015-08-19)
it was made to use one very long line, instead it should split them up
with newlines.
Furthermore we were including an inline explanation that you couldn't
combine "--all" and "<ref>", but unlike in the "blame" case this was
not preceded by an empty string.
Let's instead show that --all and <ref> can't be combined in the the
usual language of the usage syntax instead. We can make it clear that
one of the two options "--foo" and "--bar" is mandatory, but that the
two are mutually exclusive by referring to them as "( --foo | --bar
)".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options API users: align usage output in C-strings
In preparation for having continued usage lines properly aligned in
"git <cmd> -h" output, let's have the "[" on the second such lines
align with the "[" on the first line.
In some cases this makes the output worse, because e.g. the "git
ls-remote -h" output had been aligned to account for the extra
whitespace that the usage_with_options_internal() function in
parse-options.c would add.
In other cases such as builtin/stash.c (not changed here), we were
aligned in the C strings, but since that didn't account for the extra
padding in usage_with_options_internal() it would come out looking
misaligned, e.g. code like this:
Let's change all the usage arrays which use such continued usage
output via "\n"-embedding to be like builtin/stash.c.
This makes the output worse temporarily, but in a subsequent change
I'll improve the usage_with_options_internal() to take this into
account, at which point all of the strings being changed here will
emit prettier output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the launchctl_boot_plist() function was added in a16eb6b1ff3 (maintenance: skip bootout/bootstrap when plist is
registered, 2021-08-24), an unused call to launchctl_get_uid() was
added along with it. That call appears to have been copy/pasted from
launchctl_boot_plist().
Since we can remove that, we can also get rid of the "result"
variable, whose only purpose was allow for the free() between its
assignment and the return. That pattern also appears to have been
copy/pasted from launchctl_boot_plist().
As the patch shows the returned value from launchctl_get_uid() wasn't
used at all in this function. The launchctl_get_uid() function itself
just calls xstrfmt() and getuid(), neither of which have any subtle
global side-effects, so this removal is safe.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In be5d88e1128 (test-tool run-command: learn to run (parts of) the
testsuite, 2019-10-04) an init pattern was added that would use
TESTSUITE_INIT, but then promptly memset() everything back to 0. We'd
then set the "dup" on the two string lists.
Our setting of "next" to "-1" thus did nothing, we'd reset it to "0"
before using it. Let's set it to "0" instead, and trust the
"STRING_LIST_INIT_DUP" to set "strdup_strings" appropriately for us.
Note that while we compile this code, there's no in-tree user for the
"testsuite" target being modified here anymore, see the discussion at
and around <nycvar.QRO.7.76.6.2109091323150.59@tvgsbejvaqbjf.bet>[1].
Remove untracked files that are unwanted after they are done being used.
While the set of cases in this patch is certainly far from
comprehensive, it was motivated by some work to see what the fallout
would be if we were to make the removal of untracked files as a side
effect of other commands into an error. Some cases were a bit more
involved than the testcase changes included in this patch, but the ones
included here represent the simple cases. While this patch is not that
important since we are not changing the behavior of those other commands
into an error in the near term, I thought these changes were useful
anyway as an explicit documentation of the intent that these untracked
files are no longer useful.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Acked-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 11 Sep 2021 15:01:16 +0000 (11:01 -0400)]
strvec: use size_t to store nr and alloc
We converted argv_array (which later became strvec) to use size_t in 819f0e76b1 (argv-array: use size_t for count and alloc, 2020-07-28) in
order to avoid the possibility of integer overflow. But later, commit d70a9eb611 (strvec: rename struct fields, 2020-07-28) accidentally
converted these back to ints!
Those two commits were part of the same patch series. I'm pretty sure
what happened is that they were originally written in the opposite order
and then cleaned up and re-ordered during an interactive rebase. And
when resolving the inevitable conflict, I mistakenly took the "rename"
patch completely, accidentally dropping the type change.
We can correct it now; better late than never.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2021 11:45:43 +0000 (13:45 +0200)]
compression: drop write-only core_compression_* variables
Since 8de7eeb54b (compression: unify pack.compression configuration
parsing, 2016-11-15) the variables core_compression_level and
core_compression_seen are only set, but never read. Remove them.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two have fallen out of use with the SHA-256 migration.
The last use of $_x40 was removed in fc7e73d7ef (t4013: improve
diff-post-processor logic, 2020-08-21) and
The last use of $_z40 was removed in 7a868c51c2 (t5562: use $ZERO_OID,
2019-12-21), but it was then needlessly refactored to be hash-agnostic
in 192b517589 (t: use hash-specific lookup tables to define test
constants, 2020-02-22). We can just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-setup: remove unused "pull with rebase" message
Remove the "pull with rebase" message previously used by the
git-pull.sh script, which was removed in 49eb8d39c78 (Remove
contrib/examples/*, 2018-03-25).
Even if some out-of-tree user copy/pasted the old git-pull.sh code,
and relied on passing it a "pull with rebase" argument, we'll fall
back on the "*" case here, they just won't get the "pull with rebase"
part of their message translated.
I don't think it's likely that anyone out-of-tree relied on that, but
I'm being conservative here per the discussion that can be found
upthread of [1].
git-submodule: remove unused is_zero_oid() function
The is_zero_oid() function in git-submodule.sh has not been used since e83e3333b57 (submodule: port submodule subcommand 'summary' from shell
to C, 2020-08-13), so we can remove it.
This was the last user of the sane_egrep() function in
git-sh-setup.sh. I'm not removing it in case some out-of-tree user
relied on it. Per the discussion that can be found upthread of [1].
René Scharfe [Sat, 11 Sep 2021 20:43:26 +0000 (22:43 +0200)]
packfile: use oidset for bad objects
Store the object ID of broken pack entries in an oidset instead of
keeping only their hashes in an unsorted array. The resulting code is
shorter and easier to read. It also handles the (hopefully) very rare
case of having a high number of bad objects better.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2021 20:39:31 +0000 (22:39 +0200)]
midx: inline nth_midxed_pack_entry()
fill_midx_entry() finds the position of an object ID and passes it to
nth_midxed_pack_entry(), which uses the position to look up the object
ID for its own purposes. Inline the latter into the former to avoid
that lookup.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2021 20:36:40 +0000 (22:36 +0200)]
oidset: make oidset_size() an inline function
oidset_size() just reads a single word from memory and returns it.
Avoid the function call overhead for this trivial operation by turning
it into an inline function.
While we're at it, declare its parameter const to allow it to be used
on read-only oidsets.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
