Junio C Hamano [Thu, 18 Feb 2021 01:21:41 +0000 (17:21 -0800)]
Merge branch 'jk/mailmap-only-at-root'
The .mailmap is documented to be read only from the root level of a
working tree, but a stray file in a bare repository also was read
by accident, which has been corrected.
* jk/mailmap-only-at-root:
mailmap: only look for .mailmap in work tree
Junio C Hamano [Thu, 18 Feb 2021 01:21:41 +0000 (17:21 -0800)]
Merge branch 'mt/grep-cached-untracked'
"git grep --untracked" is meant to be "let's ALSO find in these
files on the filesystem" when looking for matches in the working
tree files, and does not make any sense if the primary search is
done against the index, or the tree objects. The "--cached" and
"--untracked" options have been marked as mutually incompatible.
* mt/grep-cached-untracked:
grep: error out if --untracked is used with --cached
Junio C Hamano [Thu, 18 Feb 2021 01:21:41 +0000 (17:21 -0800)]
Merge branch 'sh/mergetool-hideresolved'
"git mergetool" feeds three versions (base, local and remote) of
a conflicted path unmodified. The command learned to optionally
prepare these files with unconflicted parts already resolved.
* sh/mergetool-hideresolved:
mergetool: add per-tool support and overrides for the hideResolved flag
mergetool: break setup_tool out into separate initialization function
mergetool: add hideResolved configuration
Junio C Hamano [Thu, 18 Feb 2021 01:21:41 +0000 (17:21 -0800)]
Merge branch 'js/range-diff-one-side-only'
The "git range-diff" command learned "--(left|right)-only" option
to show only one side of the compared range.
* js/range-diff-one-side-only:
range-diff: offer --left-only/--right-only options
range-diff: move the diffopt initialization down one layer
range-diff: combine all options in a single data structure
range-diff: simplify code spawning `git log`
range-diff: libify the read_patches() function again
range-diff: avoid leaking memory in two error code paths
Junio C Hamano [Thu, 18 Feb 2021 01:21:41 +0000 (17:21 -0800)]
Merge branch 'js/range-diff-wo-dotdot'
There are other ways than ".." for a single token to denote a
"commit range", namely "<rev>^!" and "<rev>^-<n>", but "git
range-diff" did not understand them.
* js/range-diff-wo-dotdot:
range-diff(docs): explain how to specify commit ranges
range-diff/format-patch: handle commit ranges other than A..B
range-diff/format-patch: refactor check for commit range
Junio C Hamano [Thu, 18 Feb 2021 01:21:40 +0000 (17:21 -0800)]
Merge branch 'jt/clone-unborn-head'
"git clone" tries to locally check out the branch pointed at by
HEAD of the remote repository after it is done, but the protocol
did not convey the information necessary to do so when copying an
empty repository. The protocol v2 learned how to do so.
* jt/clone-unborn-head:
clone: respect remote unborn HEAD
connect, transport: encapsulate arg in struct
ls-refs: report unborn targets of symrefs
Junio C Hamano [Thu, 18 Feb 2021 01:21:40 +0000 (17:21 -0800)]
Merge branch 'mr/bisect-in-c-4'
Piecemeal of rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--check-and-set-terms` subcommand
bisect--helper: reimplement `bisect_skip` shell function in C
bisect--helper: retire `--bisect-auto-next` subcommand
bisect--helper: use `res` instead of return in BISECT_RESET case option
bisect--helper: retire `--bisect-write` subcommand
bisect--helper: reimplement `bisect_replay` shell function in C
bisect--helper: reimplement `bisect_log` shell function in C
Junio C Hamano [Thu, 18 Feb 2021 01:21:40 +0000 (17:21 -0800)]
Merge branch 'ds/commit-graph-genno-fix'
Fix incremental update of commit-graph file around corrected commit
date data.
* ds/commit-graph-genno-fix:
commit-graph: prepare commit graph
commit-graph: be extra careful about mixed generations
commit-graph: compute generations separately
commit-graph: validate layers for generation data
commit-graph: always parse before commit_graph_data_at()
commit-graph: use repo_parse_commit
Junio C Hamano [Thu, 18 Feb 2021 01:21:40 +0000 (17:21 -0800)]
Merge branch 'ak/corrected-commit-date'
The commit-graph learned to use corrected commit dates instead of
the generation number to help topological revision traversal.
* ak/corrected-commit-date:
doc: add corrected commit date info
commit-reach: use corrected commit dates in paint_down_to_common()
commit-graph: use generation v2 only if entire chain does
commit-graph: implement generation data chunk
commit-graph: implement corrected commit date
commit-graph: return 64-bit generation number
commit-graph: add a slab to store topological levels
t6600-test-reach: generalize *_three_modes
commit-graph: consolidate fill_commit_graph_info
revision: parse parent in indegree_walk_step()
commit-graph: fix regression when computing Bloom filters
grep/pcre2: move back to thread-only PCREv2 structures
Change the setup of the "pcre2_general_context" to happen per-thread
in compile_pcre2_pattern() instead of in grep_init().
This change brings it in line with how the rest of the pcre2_* members
in the grep_pat structure are set up.
As noted in the preceding commit the approach 513f2b0bbd4 (grep: make
PCRE2 aware of custom allocator, 2019-10-16) took to allocate the
pcre2_general_context seems to have been initially based on a
misunderstanding of how PCREv2 memory allocation works.
The approach of creating a global context in grep_init() is just added
complexity for almost zero gain. On my system it's 24 bytes saved
per-thread. For comparison PCREv2 will then go on to allocate at least
a kilobyte for its own thread-local state.
As noted in 6d423dd542f (grep: don't redundantly compile throwaway
patterns under threading, 2017-05-25) the grep code is intentionally
not trying to micro-optimize allocations by e.g. sharing some PCREv2
structures globally, while making others thread-local.
So let's remove this special case and make all of them thread-local
again for simplicity. With this change we could move the
pcre2_{malloc,free} functions around to live closer to their current
use. I'm not doing that here to keep this change small, that cleanup
will be done in a follow-up commit.
See also the discussion in 94da9193a6 (grep: add support for PCRE v2,
2017-06-01) about thread safety, and Johannes's comments[1] to the
effect that we should be doing what this patch is doing.
grep/pcre2: actually make pcre2 use custom allocator
Continue work started in 513f2b0bbd4 (grep: make PCRE2 aware of custom
allocator, 2019-10-16) and make PCREv2 use our pcre2_{malloc,free}().
functions for allocation. We'll now use it for all PCREv2 allocations.
The reason 513f2b0bbd4 worked as a bugfix for the USE_NED_ALLOCATOR
issue is because it targeted the allocation freed via free(), as
opposed to by a pcre2_*free() function. I.e. the pcre2_maketables()
and pcre2_maketables_free() pair.
For most of the rest we continued allocating with stock malloc()
inside PCREv2 itself, but didn't segfault because we'd use its
corresponding free().
In a preceding commit of mine I changed the free() to
pcre2_maketables_free() on versions of PCREv2 10.34 and newer. So as
far as fixing the segfault goes we could revert 513f2b0bbd4. But then
we wouldn't use the desired allocator, let's just use it instead.
Before this patch we'd on e.g.:
grep --threads=1 -iP æ.*var.*xyz
Only use pcre2_{malloc,free}() for 2 malloc() calls and 2
corresponding free() calls. Now it's 12 calls to each. This can be
observed with the GREP_PCRE2_DEBUG_MALLOC debug mode.
Reading the history of how this bug got introduced it wasn't present
in Johannes's original patch[1] to fix the issue.
My reading of that thread is that the approach the follow-up patches
to Johannes's original pursued were based on misunderstanding of how
the PCREv2 API works. In particular this part of [2]:
"most of the time (like when using UTF-8) the chartable (and
therefore the global context) is not needed (even when using
alternate allocators)"
That's simply not how PCREv2 memory allocation works. It's easy to see
how the misunderstanding came about. It's because (as noted above) the
issue was noticed because of our use of free() in our own grep.c for
freeing the memory allocated by pcre2_maketables().
Thus the misunderstanding that PCREv2's compile context is something
only needed for pcre2_maketables(), and e.g. an aborted earlier
attempt[3] to only set it up when we ourselves called
pcre2_maketables().
That's not what PCREv2's compile context is. To quote PCREv2's
documentation:
"This context just contains pointers to (and data for) external
memory management functions that are called from several places in
the PCRE2 library."
Thus the failed attempts to go down the route of only creating the
general context in cases where we ourselves call pcre2_maketables(),
before finally settling on the approach 513f2b0bbd4 took of always
creating it, but then mostly not using it.
Instead we should always create it, and then pass the general context
to those functions that accept it, so that they'll consistently use
our preferred memory allocation functions.
Make use of the pcre2_maketables_free() function to free the memory
allocated by pcre2_maketables().
At first sight it's strange that 10da030ab75 (grep: avoid leak of
chartables in PCRE2, 2019-10-16) which added the free() call here
doesn't make use of the pcre2_free() the author introduced in the
preceding commit in 513f2b0bbd4 (grep: make PCRE2 aware of custom
allocator, 2019-10-16).
The reason is that at the time the function didn't exist. It was first
introduced in PCREv2 version 10.34, released on 2019-11-21.
Let's make use of it behind a macro. I don't think this matters for
anything to do with custom allocators, but it makes our use of PCREv2
more discoverable.
At some distant point in the future we'll be able to drop the version
guard, as nobody will be running a version older than 10.34.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a use of pcre2_config(PCRE2_CONFIG_VERSION, ...) which I added
in 95ca1f987ed (grep/pcre2: better support invalid UTF-8 haystacks,
2021-01-24) with the same test done at compile-time.
It might be cuter to do this at runtime since we don't have to do the
"major >= 11 || (major >= 10 && ...)" test. But in the next commit
we'll add another version comparison that absolutely needs to be done
at compile-time, so we're better of being consistent across the board.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add optional printing of PCREv2 allocations to stderr for a developer
who manually changes the GREP_PCRE2_DEBUG_MALLOC definition to "1".
You need to manually change the definition in the source file similar
to the DEBUG_MAILMAP, there's no Makefile knob for this.
This will be referenced a subsequent commit, and is generally useful
to manually see what's going on with PCREv2 allocations while working
on that code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep/pcre2: prepare to add debugging to pcre2_malloc()
Change pcre2_malloc() in a way that'll make it easier for a debugging
fprintf() to spew out the allocated pointer.
This doesn't introduce any functional change, it just makes a
subsequent commit's diff easier to read. Changes code added in 513f2b0bbd4 (grep: make PCRE2 aware of custom allocator, 2019-10-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep/pcre2: correct reference to grep_init() in comment
Correct a comment added in 513f2b0bbd4 (grep: make PCRE2 aware of
custom allocator, 2019-10-16). This comment was never correct in
git.git, but was consistent with an older version of the patch[1].
grep/pcre2: drop needless assignment + assert() on opt->pcre2
Drop an assignment added in b65abcafc7a (grep: use PCRE v2 for
optimized fixed-string search, 2019-07-01) and the overly cautious
assert() I added in 94da9193a6e (grep: add support for PCRE v2,
2017-06-01).
There was never a good reason for this, it's just a relic from when I
initially wrote the PCREv2 support. We're not going to have confusion
about compile_pcre2_pattern() being called when it shouldn't just
because we forgot to cargo-cult this opt->pcre2 option.
Furthermore the "struct grep_opt" is (mostly) used for the options the
user supplied, let's avoid the pattern of needlessly assigning to it.
With my recent removal of the PCREv1 backend in 7599730b7e2 (Remove
support for v1 of the PCRE library, 2021-01-24) there's even less
confusion around what we call where in these codepaths, which is one
more reason to remove this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Joey Salazar [Thu, 18 Feb 2021 00:11:22 +0000 (00:11 +0000)]
doc: fix naming of response-end-pkt
Git Protocol version 2[1] defines 0002 as a Message Packet that indicates
the end of a response for stateless connections.
Change the naming of the 0002 Packet to 'Response End' to match the
parsing introduced in Wireshark's MR !1922 for consistency. A subsequent
MR in Wireshark will address additional mismatches.
Jeff King [Wed, 17 Feb 2021 23:34:21 +0000 (18:34 -0500)]
docs/rev-list: add an examples section
We currently don't show any examples of using git-rev-list at all. Let's
add some pretty elementary examples. They likely seem obvious to anybody
who has worked with the tool for a while, but my purpose here is
two-fold:
- they may be enlightening to people who haven't used the tool a lot
to give a general flavor of how it is meant to be used
- they can serve as a starting point for adding more interesting
examples (we can do that without the basic ones, of course, but I
think it makes sense to show off the building blocks)
This set is far from exhaustive, but again, the purpose is to be a
starting point for further additions.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Wed, 17 Feb 2021 19:56:04 +0000 (20:56 +0100)]
rev-list-options.txt: fix rendering of bonus paragraph
In git-log(1) -- but not in git-shortlog(1) or git-rev-list(1) -- we
include a bonus paragraph in the description of `--first-parent`. But
we forgot to add a lone "+" for a list continuation, and we shouldn't
be indenting this second paragraph. As a result, we get a different
indentation and the `backticks` render literally.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Wed, 17 Feb 2021 14:54:43 +0000 (15:54 +0100)]
blame: remove unnecessary use of get_commit_info()
When `git blame --color-by-age`, the determine_line_heat() is called to
select how to color the output based on the commit's author date. It
uses the get_commit_info() to parse the information into a `commit_info`
structure, however, this is actually unnecessary because the
determine_line_heat() caller also does the same.
Instead, let's change the determine_line_heat() to take a `commit_info`
structure and remove the internal call to get_commit_info() thus
cleaning up and optimizing the code path.
Enabling Git's trace2 API in order to record the execution time for
every call to determine_line_heat() function:
Then, running `git blame` for "kernel/fork.c" in linux.git and summing
all the execution time for every call (around 1.3k calls) resulted in
2.6x faster execution (best out 3):
git built from 328c109303 (The eighth batch, 2021-02-12) = 42ms
git built from 328c109303 + this change = 16ms
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 14 Feb 2021 10:10:57 +0000 (11:10 +0100)]
pretty: add merge and exclude options to %(describe)
Allow restricting the tags used by the placeholder %(describe) with the
options match and exclude. E.g. the following command describes the
current commit using official version tags, without those for release
candidates:
René Scharfe [Sun, 14 Feb 2021 10:04:34 +0000 (11:04 +0100)]
pretty: add %(describe)
Add a format placeholder for describe output. Implement it by actually
calling git describe, which is simple and guarantees correctness. It's
intended to be used with $Format:...$ in files with the attribute
export-subst and git archive. It can also be used with git log etc.,
even though that's going to be slow due to the fork for each commit.
Suggested-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Wed, 3 Feb 2021 15:34:50 +0000 (15:34 +0000)]
fsmonitor: refactor initialization of fsmonitor_last_update token
Isolate and document initialization of `istate->fsmonitor_last_update`.
This field should contain a fsmonitor-specific opaque token, but we
need to initialize it before we can actually talk to a fsmonitor process,
so we create a generic default value.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Willford [Wed, 3 Feb 2021 15:34:49 +0000 (15:34 +0000)]
fsmonitor: allow all entries for a folder to be invalidated
Allow fsmonitor to report directory changes by reporting paths with a
trailing slash.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Wed, 3 Feb 2021 15:34:45 +0000 (15:34 +0000)]
read-cache: log the number of lstat calls to trace2
Report the total number of calls made to lstat() inside of refresh_index().
FSMonitor improves the performance of commands like `git status` by
avoiding scanning the disk for changed files. This can be seen in
`refresh_index()`. Let's measure this.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Wed, 3 Feb 2021 15:34:44 +0000 (15:34 +0000)]
preload-index: log the number of lstat calls to trace2
Report the total number of calls made to lstat() inside preload_index().
FSMonitor improves the performance of commands like `git status` by
avoiding scanning the disk for changed files. This can be seen in
`preload_index()`. Let's measure this.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Wed, 3 Feb 2021 15:34:41 +0000 (15:34 +0000)]
p7519: fix watchman watch-list test on Windows
Only use the final portion of the test trash directory file name
when verifying that Watchman was started.
On Windows and under the SDK, $GIT_WORKTREE is a cygwin-style
path with forward slashes and a "/c/" drive name. However
`watchman watch-list` reports a proper Windows-style pathname
with drive letters and backslashes. This causes the grep to
fail. Since we don't really care about the full pathname (and
we really don't want to bother with normalizaing them), just see
if the test-name portion of the path is found.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Wed, 3 Feb 2021 15:34:40 +0000 (15:34 +0000)]
p7519: do not rely on "xargs -d" in test
Convert the test to use a more portable method to update the mtime on a
large number of files under version control.
The Mac version of xargs does not support the "-d" option.
Likewise, the "-0" and "--null" options are not portable.
Furthermore, use `test-tool chmtime` rather than `touch` to update the
mtime to ensure that it is actually updated (especially on file systems
with only whole second resolution).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Tue, 16 Feb 2021 14:06:52 +0000 (11:06 -0300)]
checkout-index: omit entries with no tempname from --temp output
With --temp (or --stage=all, which implies --temp), checkout-index
writes a list to stdout associating temporary file names to the entries'
names. But if it fails to write an entry, and the failure happens before
even assigning a temporary filename to that entry, we get an odd output
line. This can be seen when trying to check out a symlink whose blob is
missing:
The 'TAB foo' line is not much useful and it might break scripts that
expect the 'tempname TAB foo' output. So let's omit such entries from
the stdout list (but leaving the error message on stderr).
We could also consider omitting _all_ failed entries from the output
list, but that's probably not a good idea as the associated tempfiles
may have been created even when checkout failed, so scripts may want to
use the output list for cleanup.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Tue, 16 Feb 2021 14:06:51 +0000 (11:06 -0300)]
write_entry(): fix misuses of `path` in error messages
The variables `path` and `ce->name`, at write_entry(), usually have the
same contents, but that's not the case when using a checkout prefix or
writing to a tempfile. (In fact, `path` will be either empty or dirty
when writing to a tempfile.) Therefore, these variables cannot be used
interchangeably. In this sense, fix wrong uses of `path` in error
messages where it should really be `ce->name`, and add some regression
tests. (Note: there doesn't seem to be any misuse in the other way
around.)
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 16 Feb 2021 14:44:37 +0000 (09:44 -0500)]
mailmap: do not respect symlinks for in-tree .mailmap
As with .gitattributes and .gitignore, we would like to make sure that
.mailmap files are handled consistently whether read from the a blob (as
is the default behavior in a bare repo) or from the filesystem.
Likewise, we would like to avoid reading out-of-tree files pointed to by
a symlink, which could have security implications in certain setups.
We can cover both by using open_nofollow() when opening the in-tree
files. We'll continue to follow links for mailmap.file, as well as when
reading .mailmap from the current directory when outside of a repository
entirely.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 16 Feb 2021 14:44:34 +0000 (09:44 -0500)]
exclude: do not respect symlinks for in-tree .gitignore
As with .gitattributes, we would like to make sure that .gitignore files
are handled consistently whether read from the index or from the
filesystem. Likewise, we would like to avoid reading out-of-tree files
pointed to by the symlinks, which could have security implications in
certain setups.
We can cover both by using open_nofollow() when opening the in-tree
files. We'll continue to follow links for core.excludesFile, as well as
$GIT_DIR/info/exclude.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 16 Feb 2021 14:44:32 +0000 (09:44 -0500)]
attr: do not respect symlinks for in-tree .gitattributes
The attributes system may sometimes read in-tree files from the
filesystem, and sometimes from the index. In the latter case, we do not
resolve symbolic links (and are not likely to ever start doing so).
Let's open filesystem links with O_NOFOLLOW so that the two cases behave
consistently.
As a bonus, this means that git will not follow such symlinks to read
and parse out-of-tree paths. In some cases this could have security
implications, as a malicious repository can cause Git to open and read
arbitrary files. It could already feed arbitrary content to the parser,
but in certain setups it might be able to exfiltrate data from those
paths (e.g., if an automated service operating on the malicious repo
reveals its stderr to an attacker).
Note that O_NOFOLLOW only prevents following links for the path itself,
not intermediate directories in the path. At first glance, it seems
like
ln -s /some/path in-repo
might still look at "in-repo/.gitattributes", following the symlink to
"/some/path/.gitattributes". However, if "in-repo" is a symbolic link,
then we know that it has no git paths below it, and will never look at
its .gitattributes file.
We will continue to support out-of-tree symbolic links (e.g., in
$GIT_DIR/info/attributes); this just affects in-tree links. When a
symbolic link is encountered, the contents are ignored and a warning is
printed. POSIX specifies ELOOP in this case, so the user would generally
see something like:
warning: unable to access '.gitattributes': Too many levels of symbolic links
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 16 Feb 2021 14:44:28 +0000 (09:44 -0500)]
exclude: add flags parameter to add_patterns()
There are a number of callers of add_patterns() and its sibling
functions. Let's give them a "flags" parameter for adding new options
without having to touch each caller. We'll use this in a future patch to
add O_NOFOLLOW support. But for now each caller just passes 0.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 16 Feb 2021 14:44:25 +0000 (09:44 -0500)]
attr: convert "macro_ok" into a flags field
The attribute code can have a rather deep callstack, through
which we have to pass the "macro_ok" flag. In anticipation
of adding other flags, let's convert this to a generic
bit-field.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 16 Feb 2021 14:44:22 +0000 (09:44 -0500)]
add open_nofollow() helper
Some callers of open() would like to use O_NOFOLLOW, but it is not
available on all platforms. Let's abstract this into a helper function
so we can provide system-specific implementations.
Some light web-searching reveals that we might be able to get something
similar on Windows using FILE_FLAG_OPEN_REPARSE_POINT. I didn't dig into
this further.
For other systems without O_NOFOLLOW or any equivalent, we have two
options for fallback:
- we can just open anyway, following symlinks; this may have security
implications (e.g., following untrusted in-tree symlinks)
- we can determine whether the path is a symlink with lstat().
This is slower (two syscalls instead of one), but that may be
acceptable for infrequent uses like looking up .gitattributes files
(especially because we can get away with a single syscall for the
common case of ENOENT).
It's also racy, but should be sufficient for our needs (we are
worried about in-tree symlinks that we ourselves would have
previously created). We could make it non-racy at the cost of making
it even slower, by doing an fstat() on the opened descriptor and
comparing the dev/ino fields to the original lstat().
This patch implements the lstat() option in its slightly-faster racy
form.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 11 Feb 2021 19:57:50 +0000 (11:57 -0800)]
diff: --{rotate,skip}-to=<path>
In the implementation of "git difftool", there is a case where the
user wants to start viewing the diffs at a specific path and
continue on to the rest, optionally wrapping around to the
beginning. Since it is somewhat cumbersome to implement such a
feature as a post-processing step of "git diff" output, let's
support it internally with two new options.
- "git diff --rotate-to=C", when the resulting patch would show
paths A B C D E without the option, would "rotate" the paths to
shows patch to C D E A B instead. It is an error when there is
no patch for C is shown.
- "git diff --skip-to=C" would instead "skip" the paths before C,
and shows patch to C D E. Again, it is an error when there is no
patch for C is shown.
- "git log [-p]" also accepts these two options, but it is not an
error if there is no change to the specified path. Instead, the
set of output paths are rotated or skipped to the specified path
or the first path that sorts after the specified path.
Elijah Newren [Sun, 14 Feb 2021 07:51:51 +0000 (07:51 +0000)]
merge-ort: call diffcore_rename() directly
We want to pass additional information to diffcore_rename() (or some
variant thereof) without plumbing that extra information through
diff_tree_oid() and diffcore_std(). Further, since we will need to
gather additional special information related to diffs and are walking
the trees anyway in collect_merge_info(), it seems odd to have
diff_tree_oid()/diffcore_std() repeat those tree walks. And there may
be times where we can avoid traversing into a subtree in
collect_merge_info() (based on additional information at our disposal),
that the basic diff logic would be unable to take advantage of. For all
these reasons, just create the add and delete pairs ourself and then
call diffcore_rename() directly.
This change is primarily about enabling future optimizations; the
advantage of avoiding extra tree traversals is small compared to the
cost of rename detection, and the advantage of avoiding the extra tree
traversals is somewhat offset by the extra time spent in
collect_merge_info() collecting the additional data anyway. However...
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 13.294 s ± 0.103 s 12.775 s ± 0.062 s
mega-renames: 187.248 s ± 0.882 s 188.754 s ± 0.284 s
just-one-mega: 5.557 s ± 0.017 s 5.599 s ± 0.019 s
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 14 Feb 2021 07:51:50 +0000 (07:51 +0000)]
gitdiffcore doc: mention new preliminary step for rename detection
The last few patches have introduced a new preliminary step when rename
detection is on but both break detection and copy detection are off.
Document this new step. While we're at it, add a testcase that checks
the new behavior as well.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 14 Feb 2021 07:51:49 +0000 (07:51 +0000)]
diffcore-rename: guide inexact rename detection based on basenames
Make use of the new find_basename_matches() function added in the last
two patches, to find renames more rapidly in cases where we can match up
files based on basenames. As a quick reminder (see the last two commit
messages for more details), this means for example that
docs/extensions.txt and docs/config/extensions.txt are considered likely
renames if there are no remaining 'extensions.txt' files elsewhere among
the added and deleted files, and if a similarity check confirms they are
similar, then they are marked as a rename without looking for a better
similarity match among other files. This is a behavioral change, as
covered in more detail in the previous commit message.
We do not use this heuristic together with either break or copy
detection. The point of break detection is to say that filename
similarity does not imply file content similarity, and we only want to
know about file content similarity. The point of copy detection is to
use more resources to check for additional similarities, while this is
an optimization that uses far less resources but which might also result
in finding slightly fewer similarities. So the idea behind this
optimization goes against both of those features, and will be turned off
for both.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 13.815 s ± 0.062 s 13.294 s ± 0.103 s
mega-renames: 1799.937 s ± 0.493 s 187.248 s ± 0.882 s
just-one-mega: 51.289 s ± 0.019 s 5.557 s ± 0.017 s
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 14 Feb 2021 07:51:48 +0000 (07:51 +0000)]
diffcore-rename: complete find_basename_matches()
It is not uncommon in real world repositories for the majority of file
renames to not change the basename of the file; i.e. most "renames" are
just a move of files into different directories. We can make use of
this to avoid comparing all rename source candidates with all rename
destination candidates, by first comparing sources to destinations with
the same basenames. If two files with the same basename are
sufficiently similar, we record the rename; if not, we include those
files in the more exhaustive matrix comparison.
This means we are adding a set of preliminary additional comparisons,
but for each file we only compare it with at most one other file. For
example, if there was a include/media/device.h that was deleted and a
src/module/media/device.h that was added, and there are no other
device.h files in the remaining sets of added and deleted files after
exact rename detection, then these two files would be compared in the
preliminary step.
This commit does not yet actually employ this new optimization, it
merely adds a function which can be used for this purpose. The next
commit will do the necessary plumbing to make use of it.
Note that this optimization might give us different results than without
the optimization, because it's possible that despite files with the same
basename being sufficiently similar to be considered a rename, there's
an even better match between files without the same basename. I think
that is okay for four reasons: (1) it's easy to explain to the users
what happened if it does ever occur (or even for them to intuitively
figure out), (2) as the next patch will show it provides such a large
performance boost that it's worth the tradeoff, and (3) it's somewhat
unlikely that despite having unique matching basenames that other files
serve as better matches. Reason (4) takes a full paragraph to
explain...
If the previous three reasons aren't enough, consider what rename
detection already does. Break detection is not the default, meaning
that if files have the same _fullname_, then they are considered related
even if they are 0% similar. In fact, in such a case, we don't even
bother comparing the files to see if they are similar let alone
comparing them to all other files to see what they are most similar to.
Basically, we override content similarity based on sufficient filename
similarity. Without the filename similarity (currently implemented as
an exact match of filename), we swing the pendulum the opposite
direction and say that filename similarity is irrelevant and compare a
full N x M matrix of sources and destinations to find out which have the
most similar contents. This optimization just adds another form of
filename similarity comparison, but augments it with a file content
similarity check as well. Basically, if two files have the same
basename and are sufficiently similar to be considered a rename, mark
them as such without comparing the two to all other rename candidates.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 14 Feb 2021 07:51:47 +0000 (07:51 +0000)]
diffcore-rename: compute basenames of source and dest candidates
We want to make use of unique basenames among remaining source and
destination files to help inform rename detection, so that more likely
pairings can be checked first. (src/moduleA/foo.txt and
source/module/A/foo.txt are likely related if there are no other
'foo.txt' files among the remaining deleted and added files.) Add a new
function, not yet used, which creates a map of the unique basenames
within rename_src and another within rename_dst, together with the
indices within rename_src/rename_dst where those basenames show up.
Non-unique basenames still show up in the map, but have an invalid index
(-1).
This function was inspired by the fact that in real world repositories,
files are often moved across directories without changing names. Here
are some sample repositories and the percentage of their historical
renames (as of early 2020) that preserved basenames:
* linux: 76%
* gcc: 64%
* gecko: 79%
* webkit: 89%
These statistics alone don't prove that an optimization in this area
will help or how much it will help, since there are also unpaired adds
and deletes, restrictions on which basenames we consider, etc., but it
certainly motivated the idea to try something in this area.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 14 Feb 2021 07:51:46 +0000 (07:51 +0000)]
t4001: add a test comparing basename similarity and content similarity
Add a simple test where a removed file is similar to two different added
files; one of them has the same basename, and the other has a slightly
higher content similarity. In the current test, content similarity is
weighted higher than filename similarity.
Subsequent commits will add a new rule that weighs a mixture of filename
similarity and content similarity in a manner that will change the
outcome of this testcase.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 14 Feb 2021 07:35:01 +0000 (07:35 +0000)]
diffcore-rename: filter rename_src list when possible
We have to look at each entry in rename_src a total of rename_dst_nr
times. When we're not detecting copies, any exact renames or ignorable
rename paths will just be skipped over. While checking that these can
be skipped over is a relatively cheap check, it's still a waste of time
to do that check more than once, let alone rename_dst_nr times. When
rename_src_nr is a few thousand times bigger than the number of relevant
sources (such as when cherry-picking a commit that only touched a
handful of files, but from a side of history that has different names
for some high level directories), this time can add up.
First make an initial pass over the rename_src array and move all the
relevant entries to the front, so that we can iterate over just those
relevant entries.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 14.119 s ± 0.101 s 13.815 s ± 0.062 s
mega-renames: 1802.044 s ± 0.828 s 1799.937 s ± 0.493 s
just-one-mega: 51.391 s ± 0.028 s 51.289 s ± 0.019 s
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hariom Verma [Sat, 13 Feb 2021 01:52:43 +0000 (01:52 +0000)]
ref-filter: use pretty.c logic for trailers
Now, ref-filter is using pretty.c logic for setting trailer options.
New to ref-filter:
:key=<K> - only show trailers with specified key.
:valueonly[=val] - only show the value part.
:separator=<SEP> - inserted between trailer lines.
:key_value_separator=<SEP> - inserted between key and value in trailer lines
Enhancement to existing options(now can take value and its optional):
:only[=val]
:unfold[=val]
'val' can be: true, on, yes or false, off, no.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Heba Waly <heba.waly@gmail.com> Signed-off-by: Hariom Verma <hariom18599@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hariom Verma [Sat, 13 Feb 2021 01:52:42 +0000 (01:52 +0000)]
pretty.c: capture invalid trailer argument
As we would like to use this trailers logic in the ref-filter, it's
nice to get an invalid trailer argument. This will allow us to print
precise error message while using `format_set_trailers_options()` in
ref-filter.
For capturing the invalid argument, we changed the working of
`format_set_trailers_options()` a little bit.
Original logic does "break" and fell through in mainly 2 cases -
1. unknown/invalid argument
2. end of the arg string
But now instead of "break", we capture invalid argument and return
non-zero. And non-zero is handled by the caller.
(We prepared the caller to handle non-zero in the previous commit).
Capturing invalid arguments this way will also affects the working
of current logic. As at the end of the arg string it will return non-zero.
So in order to make things correct, introduced an additional conditional
statement i.e if encounter ")", do 'break'.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Heba Waly <heba.waly@gmail.com> Signed-off-by: Hariom Verma <hariom18599@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hariom Verma [Sat, 13 Feb 2021 01:52:41 +0000 (01:52 +0000)]
pretty.c: refactor trailer logic to `format_set_trailers_options()`
Refactored trailers formatting logic inside pretty.c to a new function
`format_set_trailers_options()`. This new function returns the non-zero
in case of unusual. The caller handles the non-zero by "goto trailers_out".
This change will allow us to reuse the same logic in other places.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Heba Waly <heba.waly@gmail.com> Signed-off-by: Hariom Verma <hariom18599@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 12 Feb 2021 22:21:04 +0000 (14:21 -0800)]
Merge branch 'tb/precompose-prefix-too'
When commands are started from a subdirectory, they may have to
compare the path to the subdirectory (called prefix and found out
from $(pwd)) with the tracked paths. On macOS, $(pwd) and
readdir() yield decomposed path, while the tracked paths are
usually normalized to the precomposed form, causing mismatch. This
has been fixed by taking the same approach used to normalize the
command line arguments.
Junio C Hamano [Fri, 12 Feb 2021 22:21:04 +0000 (14:21 -0800)]
Merge branch 'jk/complete-branch-force-delete'
The command line completion (in contrib/) completed "git branch -d"
with branch names, but "git branch -D" offered tagnames in addition,
which has been corrected. "git branch -M" had the same problem.
* jk/complete-branch-force-delete:
doc/git-branch: fix awkward wording for "-c"
completion: handle other variants of "branch -m"
completion: treat "branch -D" the same way as "branch -d"
Junio C Hamano [Fri, 12 Feb 2021 22:21:04 +0000 (14:21 -0800)]
Merge branch 'tb/pack-revindex-on-disk'
Introduce an on-disk file to record revindex for packdata, which
traditionally was always created on the fly and only in-core.
* tb/pack-revindex-on-disk:
t5325: check both on-disk and in-memory reverse index
pack-revindex: ensure that on-disk reverse indexes are given precedence
t: support GIT_TEST_WRITE_REV_INDEX
t: prepare for GIT_TEST_WRITE_REV_INDEX
Documentation/config/pack.txt: advertise 'pack.writeReverseIndex'
builtin/pack-objects.c: respect 'pack.writeReverseIndex'
builtin/index-pack.c: write reverse indexes
builtin/index-pack.c: allow stripping arbitrary extensions
pack-write.c: prepare to write 'pack-*.rev' files
packfile: prepare for the existence of '*.rev' files
Junio C Hamano [Fri, 12 Feb 2021 22:21:04 +0000 (14:21 -0800)]
Merge branch 'ab/tests-various-fixup'
Various test updates.
* ab/tests-various-fixup:
rm tests: actually test for SIGPIPE in SIGPIPE test
archive tests: use a cheaper "zipinfo -h" invocation to get header
upload-pack tests: avoid a non-zero "grep" exit status
git-svn tests: rewrite brittle tests to use "--[no-]merges".
git svn mergeinfo tests: refactor "test -z" to use test_must_be_empty
git svn mergeinfo tests: modernize redirection & quoting style
cache-tree tests: explicitly test HEAD and index differences
cache-tree tests: use a sub-shell with less indirection
cache-tree tests: remove unused $2 parameter
cache-tree tests: refactor for modern test style
Elijah Newren [Wed, 3 Feb 2021 20:03:46 +0000 (20:03 +0000)]
diffcore-rename: no point trying to find a match better than exact
diffcore_rename() had some code to avoid having destination paths that
already had an exact rename detected from being re-checked for other
renames. Source paths, however, were re-checked because we wanted to
allow the possibility of detecting copies. But if copy detection isn't
turned on, then this merely amounts to attempting to find a
better-than-exact match, which naturally ends up being an expensive
no-op. In particular, copy detection is never turned on by the merge
machinery.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 14.263 s ± 0.053 s 14.119 s ± 0.101 s
mega-renames: 5504.231 s ± 5.150 s 1802.044 s ± 0.828 s
just-one-mega: 158.534 s ± 0.498 s 51.391 s ± 0.028 s
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add assertions of the correct parameter count of various functions, in
particularly the wrappers for the shell "test" built-in.
In an earlier commit we fixed a bug with an incorrect number of
arguments being passed to "test_path_is_{file,missing}". Let's also
guard other similar functions from the same sort of misuse.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the optional "diagnostics" parameter of the
test_path_is_{file,dir,missing} functions.
We have a lot of uses of these functions, but the only legitimate use
of the diagnostics parameter is from when the functions themselves
were introduced in 2caf20c52b7 (test-lib: user-friendly alternatives
to test [-d|-f|-e], 2010-08-10).
But as the the rest of this diff demonstrates its presence did more to
silently introduce bugs in our tests. Fix such bugs in the tests added
in ae4e89e549b (gc: add --keep-largest-pack option, 2018-04-15), and c04ba51739a (t6046: testcases checking whether updates can be skipped
in a merge, 2018-04-19).
Let's also assert that those functions are called with exactly one
parameter, a follow-up commit will add similar asserts to other
functions in test-lib-functions.sh that we didn't have existing misuse
of.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "diff-lib" to "lib-diff". With this rename and preceding
commits there is no remaining t/*lib* which doesn't follow the
convention of being called t/lib-*.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.22:
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.21:
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.20:
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.19:
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.18:
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.17:
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
run-command: invalidate lstat cache after a command finished
In the previous commit, we intercepted calls to `rmdir()` to invalidate
the lstat cache in the successful case, so that the lstat cache could
not have the idea that a directory exists where there is none.
The same situation can arise, of course, when a separate process is
spawned (most notably, this is the case in `submodule_move_head()`).
Obviously, we cannot know whether a directory was removed in that
process, therefore we must invalidate the lstat cache afterwards.
Note: in contrast to `lstat_cache_aware_rmdir()`, we invalidate the
lstat cache even in case of an error: the process might have removed a
directory and still have failed afterwards.
Co-authored-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Matheus Tavares [Thu, 10 Dec 2020 13:27:55 +0000 (10:27 -0300)]
checkout: fix bug that makes checkout follow symlinks in leading path
Before checking out a file, we have to confirm that all of its leading
components are real existing directories. And to reduce the number of
lstat() calls in this process, we cache the last leading path known to
contain only directories. However, when a path collision occurs (e.g.
when checking out case-sensitive files in case-insensitive file
systems), a cached path might have its file type changed on disk,
leaving the cache on an invalid state. Normally, this doesn't bring
any bad consequences as we usually check out files in index order, and
therefore, by the time the cached path becomes outdated, we no longer
need it anyway (because all files in that directory would have already
been written).
But, there are some users of the checkout machinery that do not always
follow the index order. In particular: checkout-index writes the paths
in the same order that they appear on the CLI (or stdin); and the
delayed checkout feature -- used when a long-running filter process
replies with "status=delayed" -- postpones the checkout of some entries,
thus modifying the checkout order.
When we have to check out an out-of-order entry and the lstat() cache is
invalid (due to a previous path collision), checkout_entry() may end up
using the invalid data and thrusting that the leading components are
real directories when, in reality, they are not. In the best case
scenario, where the directory was replaced by a regular file, the user
will get an error: "fatal: unable to create file 'foo/bar': Not a
directory". But if the directory was replaced by a symlink, checkout
could actually end up following the symlink and writing the file at a
wrong place, even outside the repository. Since delayed checkout is
affected by this bug, it could be used by an attacker to write
arbitrary files during the clone of a maliciously crafted repository.
Some candidate solutions considered were to disable the lstat() cache
during unordered checkouts or sort the entries before passing them to
the checkout machinery. But both ideas include some performance penalty
and they don't future-proof the code against new unordered use cases.
Instead, we now manually reset the lstat cache whenever we successfully
remove a directory. Note: We are not even checking whether the directory
was the same as the lstat cache points to because we might face a
scenario where the paths refer to the same location but differ due to
case folding, precomposed UTF-8 issues, or the presence of `..`
components in the path. Two regression tests, with case-collisions and
utf8-collisions, are also added for both checkout-index and delayed
checkout.
Note: to make the previously mentioned clone attack unfeasible, it would
be sufficient to reset the lstat cache only after the remove_subtree()
call inside checkout_entry(). This is the place where we would remove a
directory whose path collides with the path of another entry that we are
currently trying to check out (possibly a symlink). However, in the
interest of a thorough fix that does not leave Git open to
similar-but-not-identical attack vectors, we decided to intercept
all `rmdir()` calls in one fell swoop.
This addresses CVE-2021-21300.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Junio C Hamano [Thu, 11 Feb 2021 21:58:43 +0000 (13:58 -0800)]
Merge branch 'en/merge-ort-perf'
The "ort" merge strategy.
* en/merge-ort-perf:
merge-ort: begin performance work; instrument with trace2_region_* calls
merge-ort: ignore the directory rename split conflict for now
merge-ort: fix massive leak
projects / thirdparty / git.git / log
