Christian Couder [Thu, 11 Jun 2020 12:05:16 +0000 (14:05 +0200)]
upload-pack: pass upload_pack_data to got_oid()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to got_oid(), so that
this function can use all the fields of the struct.
This will be used in followup commits to move a static variable
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:15 +0000 (14:05 +0200)]
upload-pack: pass upload_pack_data to ok_to_give_up()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to ok_to_give_up(), so
that this function can use all the fields of the struct.
This will be used in followup commits to move a static variable
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:14 +0000 (14:05 +0200)]
upload-pack: pass upload_pack_data to send_acks()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to send_acks(), so
that this function can use all the fields of the struct.
This will be used in followup commits to move a static variable
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:13 +0000 (14:05 +0200)]
upload-pack: pass upload_pack_data to process_haves()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to process_haves(), so
that this function can use all the fields of the struct.
This will be used in followup commits to move a static variable
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:12 +0000 (14:05 +0200)]
upload-pack: change allow_unadvertised_object_request to an enum
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's change allow_unadvertised_object_request,
which is now part of 'upload_pack_data', from an 'unsigned int'
to an enum.
This will make it clear which values this variable can take.
While at it let's change this variable name to 'allow_uor' to
make it shorter.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:11 +0000 (14:05 +0200)]
upload-pack: move allow_unadvertised_object_request to upload_pack_data
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'allow_unadvertised_object_request'
static variable into this struct.
It is used by code common to protocol v0 and protocol v2.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:08 +0000 (14:05 +0200)]
upload-pack: pass upload_pack_data to send_unshallow()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to send_unshallow(), so
that this function can use all the fields of the struct.
This will be used in followup commits to move static variables
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:07 +0000 (14:05 +0200)]
upload-pack: pass upload_pack_data to deepen_by_rev_list()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to deepen_by_rev_list(),
so that this function can use all the fields of the struct.
This will be used in followup commits to move static variables
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:06 +0000 (14:05 +0200)]
upload-pack: pass upload_pack_data to deepen()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to deepen(), so that
this function can use all the fields of the struct.
This will be used in followup commits to move static variables
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Thu, 11 Jun 2020 12:05:05 +0000 (14:05 +0200)]
upload-pack: pass upload_pack_data to send_shallow_list()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to send_shallow_list(),
so that this function can use all the fields of the struct.
This will be used in followup commits to move static variables
into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 10 Jun 2020 20:57:23 +0000 (13:57 -0700)]
upload-pack: send part of packfile response as uri
Teach upload-pack to send part of its packfile response as URIs.
An administrator may configure a repository with one or more
"uploadpack.blobpackfileuri" lines, each line containing an OID, a pack
hash, and a URI. A client may configure fetch.uriprotocols to be a
comma-separated list of protocols that it is willing to use to fetch
additional packfiles - this list will be sent to the server. Whenever an
object with one of those OIDs would appear in the packfile transmitted
by upload-pack, the server may exclude that object, and instead send the
URI. The client will then download the packs referred to by those URIs
before performing the connectivity check.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 10 Jun 2020 20:57:22 +0000 (13:57 -0700)]
fetch-pack: support more than one pack lockfile
Whenever a fetch results in a packfile being downloaded, a .keep file is
generated, so that the packfile can be preserved (from, say, a running
"git repack") until refs are written referring to the contents of the
packfile.
In a subsequent patch, a successful fetch using protocol v2 may result
in more than one .keep file being generated. Therefore, teach
fetch_pack() and the transport mechanism to support multiple .keep
files.
Implementation notes:
- builtin/fetch-pack.c normally does not generate .keep files, and thus
is unaffected by this or future changes. However, it has an
undocumented "--lock-pack" feature, used by remote-curl.c when
implementing the "fetch" remote helper command. In keeping with the
remote helper protocol, only one "lock" line will ever be written;
the rest will result in warnings to stderr. However, in practice,
warnings will never be written because the remote-curl.c "fetch" is
only used for protocol v0/v1 (which will not generate multiple .keep
files). (Protocol v2 uses the "stateless-connect" command, not the
"fetch" command.)
- connected.c has an optimization in that connectivity checks on a ref
need not be done if the target object is in a pack known to be
self-contained and connected. If there are multiple packfiles, this
optimization can no longer be done.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 10 Jun 2020 20:57:21 +0000 (13:57 -0700)]
upload-pack: refactor reading of pack-objects out
Subsequent patches will change how the output of pack-objects is
processed, so extract that processing into its own function.
Currently, at most 1 character can be buffered (in the "buffered" local
variable). One of those patches will require a larger buffer, so replace
that "buffered" local variable with a buffer array.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 10 Jun 2020 20:57:19 +0000 (13:57 -0700)]
Documentation: order protocol v2 sections
The current C Git implementation expects Git servers to follow a
specific order of sections when transmitting protocol v2 responses, but
this is not explicit in the documentation. Make the order explicit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 10 Jun 2020 20:57:18 +0000 (13:57 -0700)]
http-fetch: support fetching packfiles by URL
Teach http-fetch the ability to download packfiles directly, given a
URL, and to verify them.
The http_pack_request suite has been augmented with a function that
takes a URL directly. With this function, the hash is only used to
determine the name of the temporary file.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 10 Jun 2020 20:57:16 +0000 (13:57 -0700)]
http: refactor finish_http_pack_request()
finish_http_pack_request() does multiple tasks, including some
housekeeping on a struct packed_git - (1) closing its index, (2)
removing it from a list, and (3) installing it. These concerns are
independent of fetching a pack through HTTP: they are there only because
(1) the calling code opens the pack's index before deciding to fetch it,
(2) the calling code maintains a list of packfiles that can be fetched,
and (3) the calling code fetches it in order to make use of its objects
in the same process.
In preparation for a subsequent commit, which adds a feature that does
not need any of this housekeeping, remove (1), (2), and (3) from
finish_http_pack_request(). (2) and (3) are now done by a helper
function, and (1) is the responsibility of the caller (in this patch,
done closer to the point where the pack index is opened).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 10 Jun 2020 20:57:15 +0000 (13:57 -0700)]
http: use --stdin when indexing dumb HTTP pack
When Git fetches a pack using dumb HTTP, (among other things) it invokes
index-pack on a ".pack.temp" packfile, specifying the filename as an
argument.
A future commit will require the aforementioned invocation of index-pack
to also generate a "keep" file. To use this, we either have to use
index-pack's naming convention (because --keep requires the pack's
filename to end with ".pack") or to pass the pack through stdin. Of the
two, it is simpler to pass the pack through stdin.
Thus, teach http to pass --stdin to index-pack. As a bonus, the code is
now simpler.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Wed, 10 Jun 2020 06:30:49 +0000 (02:30 -0400)]
worktree: make "move" refuse to move atop missing registered worktree
"git worktree add" takes special care to avoid creating a new worktree
at a location already registered to an existing worktree even if that
worktree is missing (which can happen, for instance, if the worktree
resides on removable media). "git worktree move", however, is not so
careful when validating the destination location and will happily move
the source worktree atop the location of a missing worktree. This leads
to the anomalous situation of multiple worktrees being associated with
the same path, which is expressly forbidden by design. For example:
$ git clone foo.git
$ cd foo
$ git worktree add ../bar
$ git worktree add ../baz
$ rm -rf ../bar
$ git worktree move ../baz ../bar
$ git worktree list
.../foo beefd00f [master]
.../bar beefd00f [bar]
.../bar beefd00f [baz]
$ git worktree remove ../bar
fatal: validation failed, cannot remove working tree:
'.../bar' does not point back to '.git/worktrees/bar'
Fix this shortcoming by enhancing "git worktree move" to perform the
same additional validation of the destination directory as done by "git
worktree add".
While at it, add a test to verify that "git worktree move" won't move a
worktree atop an existing (non-worktree) path -- a restriction which has
always been in place but was never tested.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add" checks that the specified path is a valid location
for a new worktree by ensuring that the path does not already exist and
is not already registered to another worktree (a path can be registered
but missing, for instance, if it resides on removable media). Since "git
worktree add" is not the only command which should perform such
validation ("git worktree move" ought to also), generalize the the
validation function for use by other callers, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Wed, 10 Jun 2020 06:30:47 +0000 (02:30 -0400)]
worktree: prune linked worktree referencing main worktree path
"git worktree prune" detects when multiple entries are associated with
the same path and prunes the duplicates, however, it does not detect
when a linked worktree points at the path of the main worktree.
Although "git worktree add" disallows creating a new worktree with the
same path as the main worktree, such a case can arise outside the
control of Git even without the user mucking with .git/worktree/<id>/
administrative files. For instance:
$ git clone foo.git
$ git -C foo worktree add ../bar
$ rm -rf bar
$ mv foo bar
$ git -C bar worktree list
.../bar deadfeeb [master]
.../bar deadfeeb [bar]
Help the user recover from such corruption by extending "git worktree
prune" to also detect when a linked worktree is associated with the path
of the main worktree.
Reported-by: Jonathan Müller <jonathanmueller.dev@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Wed, 10 Jun 2020 06:30:46 +0000 (02:30 -0400)]
worktree: prune duplicate entries referencing same worktree path
A fundamental restriction of linked working trees is that there must
only ever be a single worktree associated with a particular path, thus
"git worktree add" explicitly disallows creation of a new worktree at
the same location as an existing registered worktree. Nevertheless,
users can still "shoot themselves in the foot" by mucking with
administrative files in .git/worktree/<id>/. Worse, "git worktree move"
is careless[1] and allows a worktree to be moved atop a registered but
missing worktree (which can happen, for instance, if the worktree is on
removable media). For instance:
Eric Sunshine [Wed, 10 Jun 2020 06:30:45 +0000 (02:30 -0400)]
worktree: make high-level pruning re-usable
The low-level logic for removing a worktree is well encapsulated in
delete_git_dir(). However, high-level details related to pruning a
worktree -- such as dealing with verbosity and dry-run mode -- are not
encapsulated. Factor out this high-level logic into its own function so
it can be re-used as new worktree corruption detectors are added.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Wed, 10 Jun 2020 06:30:44 +0000 (02:30 -0400)]
worktree: give "should be pruned?" function more meaningful name
Readers of the name prune_worktree() are likely to expect the function
to actually prune a worktree, however, it only answers the question
"should this worktree be pruned?". Give it a name more reflective of its
true purpose to avoid such confusion.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Chris Torek [Tue, 9 Jun 2020 19:00:21 +0000 (19:00 +0000)]
t/t3430: avoid undefined git diff behavior
The autosquash-and-exec test used "git diff HEAD^!" to mean
"git diff HEAD^ HEAD". Use these directly instead of relying
on the undefined but actual-current behavior of "HEAD^!".
Signed-off-by: Chris Torek <chris.torek@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Han-Wen Nienhuys [Wed, 20 May 2020 17:36:11 +0000 (17:36 +0000)]
reftable: clarify how empty tables should be written
The format allows for some ambiguity, as a lone footer also starts
with a valid file header. However, the current JGit code will barf on
this. This commit codifies this behavior into the standard.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Wed, 20 May 2020 17:36:10 +0000 (17:36 +0000)]
reftable: file format documentation
Shawn Pearce explains:
Some repositories contain a lot of references (e.g. android at 866k,
rails at 31k). The reftable format provides:
- Near constant time lookup for any single reference, even when the
repository is cold and not in process or kernel cache.
- Near constant time verification if a SHA-1 is referred to by at least
one reference (for allow-tip-sha1-in-want).
- Efficient lookup of an entire namespace, such as `refs/tags/`.
- Support atomic push `O(size_of_update)` operations.
- Combine reflog storage with ref storage.
This file format spec was originally written in July, 2017 by Shawn
Pearce. Some refinements since then were made by Shawn and by Han-Wen
Nienhuys based on experiences implementing and experimenting with the
format. (All of this was in the context of our work at Google and
Google is happy to contribute the result to the Git project.)
Imported from JGit[1]'s current version (c217d33ff,
"Documentation/technical/reftable: improve repo layout", 2020-02-04)
of Documentation/technical/reftable.md and converted to asciidoc by
running
using pandoc 2.2.1. The result required the following additional
minor changes:
- removed the [TOC] directive to add a table of contents, since
asciidoc does not support it
- replaced git-scm.com/docs links with linkgit: directives that link
to other pages within Git's documentation
[1] https://eclipse.googlesource.com/jgit/jgit
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 9 Jun 2020 01:06:32 +0000 (18:06 -0700)]
Merge branch 'cc/upload-pack-data'
Code clean-up.
* cc/upload-pack-data:
upload-pack: use upload_pack_data fields in receive_needs()
upload-pack: pass upload_pack_data to create_pack_file()
upload-pack: remove static variable 'stateless_rpc'
upload-pack: pass upload_pack_data to check_non_tip()
upload-pack: pass upload_pack_data to send_ref()
upload-pack: move symref to upload_pack_data
upload-pack: use upload_pack_data writer in receive_needs()
upload-pack: pass upload_pack_data to receive_needs()
upload-pack: pass upload_pack_data to get_common_commits()
upload-pack: use 'struct upload_pack_data' in upload_pack()
upload-pack: move 'struct upload_pack_data' around
upload-pack: move {want,have}_obj to upload_pack_data
upload-pack: remove unused 'wants' from upload_pack_data
Junio C Hamano [Tue, 9 Jun 2020 01:06:30 +0000 (18:06 -0700)]
Merge branch 'dl/remote-curl-deadlock-fix'
On-the-wire protocol v2 easily falls into a deadlock between the
remote-curl helper and the fetch-pack process when the server side
prematurely throws an error and disconnects. The communication has
been updated to make it more robust.
* dl/remote-curl-deadlock-fix:
stateless-connect: send response end packet
pkt-line: define PACKET_READ_RESPONSE_END
remote-curl: error on incomplete packet
pkt-line: extern packet_length()
transport: extract common fetch_pack() call
remote-curl: remove label indentation
remote-curl: fix typo
Junio C Hamano [Tue, 9 Jun 2020 01:06:29 +0000 (18:06 -0700)]
Merge branch 'vs/complete-stash-show-p-fix'
The command line completion script (in contrib/) tried to complete
"git stash -p" as if it were "git stash push -p", but it was too
aggressive and also affected "git stash show -p", which has been
corrected.
* vs/complete-stash-show-p-fix:
completion: don't override given stash subcommand with -p
Junio C Hamano [Tue, 9 Jun 2020 01:06:28 +0000 (18:06 -0700)]
Merge branch 'rs/fsck-duplicate-names-in-trees'
The check in "git fsck" to ensure that the tree objects are sorted
still had corner cases it missed unsorted entries.
* rs/fsck-duplicate-names-in-trees:
fsck: detect more in-tree d/f conflicts
t1450: demonstrate undetected in-tree d/f conflict
t1450: increase test coverage of in-tree d/f detection
fsck: fix a typo in a comment
Junio C Hamano [Tue, 9 Jun 2020 01:06:27 +0000 (18:06 -0700)]
Merge branch 'cb/t4210-illseq-auto-detect'
As FreeBSD is not the only platform whose regexp library reports
a REG_ILLSEQ error when fed invalid UTF-8, add logic to detect that
automatically and skip the affected tests.
* cb/t4210-illseq-auto-detect:
t4210: detect REG_ILLSEQ dynamically and skip affected tests
t/helper: teach test-regex to report pattern errors (like REG_ILLSEQ)
Emily Shaffer [Mon, 8 Jun 2020 21:11:32 +0000 (14:11 -0700)]
docs: mention MyFirstContribution in more places
While the MyFirstContribution guide exists and has received some use and
positive reviews, it is still not as discoverable as it could be. Add a
reference to it from the GitHub pull request template, where many
brand-new contributors may look. Also add a reference to it in
SubmittingPatches, which is the central source of guidance for patch
contribution.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Reviewed-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Mon, 8 Jun 2020 06:23:49 +0000 (02:23 -0400)]
worktree: factor out repeated string literal
For each worktree removed by "git worktree prune", it reports the reason
for the removal. All reasons share the common prefix "Removing
worktrees/%s:". As new removal reasons are added, this prefix needs to
be duplicated, which is error-prone and potentially cumbersome.
Therefore, factor out the common prefix.
Although this change seems to increase the "sentence lego quotient", it
should be reasonably safe, as the reason for removal is a distinct
clause, not strictly related to the prefix. Moreover, the "worktrees" in
"Removing worktrees/%s:" is a path literal which ought not be localized,
so by factoring it out, we can more easily avoid exposing that path
fragment to translators.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify the 'chunk_ids' and 'chunk_sizes' arrays into an array of
'struct chunk_info'. This will allow more cleanups in the following
patches.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In write_commit_graph_file() one block of code fills the array of
chunk IDs, another block of code fills the array of chunk offsets,
then the chunk IDs and offsets are written to the Chunk Lookup table,
and finally a third block of code writes the actual chunks. In case
of optional chunks like Extra Edge List and Base Graphs List there is
also a condition checking whether that chunk is necessary/desired, and
that same condition is repeated in all those three blocks of code.
This patch series is about to add more optional chunks, so there would
be even more repeated conditions.
Those chunk offsets are relative to the beginning of the file, so they
inherently depend on the size of the Chunk Lookup table, which in turn
depends on the number of chunks that are to be written to the
commit-graph file. IOW at the time we set the first chunk's ID we
can't yet know its offset, because we don't yet know how many chunks
there are.
Simplify this by initially filling an array of chunk sizes, not
offsets, and calculate the offsets based on the chunk sizes only
later, while we are writing the Chunk Lookup table. This way we can
fill the arrays of chunk IDs and sizes in one go, eliminating one set
of repeated conditions.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 5 Jun 2020 13:00:30 +0000 (13:00 +0000)]
commit-graph: simplify parse_commit_graph() #2
The Chunk Lookup table stores the chunks' starting offset in the
commit-graph file, not their sizes. Consequently, the size of a chunk
can only be calculated by subtracting its offset from the offset of
the subsequent chunk (or that of the terminating label). This is
currenly implemented in a bit complicated way: as we iterate over the
entries of the Chunk Lookup table, we check the id of each chunk and
store its starting offset, then we check the id of the last seen chunk
and calculate its size using its previously saved offset. At the
moment there is only one chunk for which we calculate its size, but
this patch series will add more, and the repeated chunk id checks are
not that pretty.
Instead let's read ahead the offset of the next chunk on each
iteration, so we can calculate the size of each chunk right away,
right where we store its starting offset.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 5 Jun 2020 13:00:29 +0000 (13:00 +0000)]
commit-graph: simplify parse_commit_graph() #1
While we iterate over all entries of the Chunk Lookup table we make
sure that we don't attempt to read past the end of the mmap-ed
commit-graph file, and check in each iteration that the chunk ID and
offset we are about to read is still within the mmap-ed memory region.
However, these checks in each iteration are not really necessary,
because the number of chunks in the commit-graph file is already known
before this loop from the just parsed commit-graph header.
So let's check that the commit-graph file is large enough for all
entries in the Chunk Lookup table before we start iterating over those
entries, and drop those per-iteration checks. While at it, take into
account the size of everything that is necessary to have a valid
commit-graph file, i.e. the size of the header, the size of the
mandatory OID Fanout chunk, and the size of the signature in the
trailer as well.
Note that this necessitates the change of the error message as well,
and, consequently, have to update the 'detect incorrect chunk count'
test in 't5318-commit-graph.sh' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 5 Jun 2020 13:00:28 +0000 (13:00 +0000)]
commit-graph: clean up #includes
Our CodingGuidelines says that it's sufficient to include one of
'git-compat-util.h' and 'cache.h', but both 'commit-graph.c' and
'commit-graph.h' include both. Let's include only 'git-compat-util.h'
to loose a bunch of unnecessary dependencies; but include 'hash.h',
because 'commit-graph.h' does require the definition of 'struct
object_id'.
'commit-graph.h' explicitly includes 'repository.h' and
'string-list.h', but only needs the declaration of a few structs from
them. Drop these includes and forward-declare the necessary structs
instead.
'commit-graph.c' includes 'dir.h', but doesn't actually use anything
from there, so let's drop that #include as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 5 Jun 2020 13:00:27 +0000 (13:00 +0000)]
diff.h: drop diff_tree_oid() & friends' return value
ll_diff_tree_oid() has only ever returned 0 [1], so it's return value
is basically useless. It's only caller diff_tree_oid() has only ever
returned the return value of ll_diff_tree_oid() as-is [2], so its
return value is just as useless. Most of diff_tree_oid()'s callers
simply ignore its return value, except:
- diff_root_tree_oid() is a thin wrapper around diff_tree_oid() and
returns with its return value, but all of diff_root_tree_oid()'s
callers ignore its return value.
- rev_compare_tree() and rev_same_tree_as_empty() do look at the
return value in a condition, but, since the return value is always
0, the former's < 0 condition is never fulfilled, while the
latter's >= 0 condition is always fulfilled.
So let's drop the return value of ll_diff_tree_oid(), diff_tree_oid()
and diff_root_tree_oid(), and drop those conditions from
rev_compare_tree() and rev_same_tree_as_empty() as well.
[1] ll_diff_tree_oid() and its ancestors have been returning only 0
ever since it was introduced as diff_tree() in 9174026cfe (Add
"diff-tree" program to show which files have changed between two
trees., 2005-04-09).
[2] diff_tree_oid() traces back to diff-tree.c:main() in 9174026cfe as
well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 5 Jun 2020 13:00:26 +0000 (13:00 +0000)]
commit-slab: add a function to deep free entries on the slab
clear_##slabname() frees only the memory allocated for a commit slab
itself, but entries in the commit slab might own additional memory
outside the slab that should be freed as well. We already have (at
least) one such commit slab, and this patch series is about to add one
more.
To free all additional memory owned by entries on the commit slab the
user of such a slab could iterate over all commits it knows about,
peek whether there is a valid entry associated with each commit, and
free the additional memory, if any. Or it could rely on intimate
knowledge about the internals of the commit slab implementation, and
could itself iterate directly through all entries in the slab, and
free the additional memory. Or it could just leak the additional
memory...
Introduce deep_clear_##slabname() to allow releasing memory owned by
commit slab entries by invoking the 'void free_fn(elemtype *ptr)'
function specified as parameter for each entry in the slab.
Use it in get_shallow_commits() in 'shallow.c' to replace an
open-coded iteration over a commit slab's entries.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 5 Jun 2020 13:00:25 +0000 (13:00 +0000)]
commit-graph-format.txt: all multi-byte numbers are in network byte order
The commit-graph format specifies that "All 4-byte numbers are in
network order", but the commit-graph contains 8-byte integers as well
(file offsets in the Chunk Lookup table), and their byte order is
unspecified.
Clarify that all multi-byte integers are in network byte order.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Fri, 5 Jun 2020 13:00:24 +0000 (13:00 +0000)]
commit-graph: fix parsing the Chunk Lookup table
The commit-graph file format specifies that the chunks may be in any
order. However, if the OID Lookup chunk happens to be the last one in
the file, then any command attempting to access the commit-graph data
will fail with:
fatal: invalid commit position. commit-graph is likely corrupt
In this case the error is wrong, the commit-graph file does conform to
the specification, but the parsing of the Chunk Lookup table is a bit
buggy, and leaves the field holding the number of commits in the
commit-graph zero-initialized.
The number of commits in the commit-graph is determined while parsing
the Chunk Lookup table, by dividing the size of the OID Lookup chunk
with the hash size. However, the Chunk Lookup table doesn't actually
store the size of the chunks, but it stores their starting offset.
Consequently, the size of a chunk can only be calculated by
subtracting the starting offsets of that chunk from the offset of the
subsequent chunk, or in case of the last chunk from the offset
recorded in the terminating label. This is currenly implemented in a
bit complicated way: as we iterate over the entries of the Chunk
Lookup table, we check the ID of each chunk and store its starting
offset, then we check the ID of the last seen chunk and calculate its
size using its previously saved offset if necessary (at the moment
it's only necessary for the OID Lookup chunk). Alas, while parsing
the Chunk Lookup table we only interate through the "real" chunks, but
never look at the terminating label, thus don't even check whether
it's necessary to calulate the size of the last chunk. Consequently,
if the OID Lookup chunk is the last one, then we don't calculate its
size and turn don't run the piece of code determining the number of
commits in the commit graph, leaving the field holding that number
unchanged (i.e. zero-initialized), eventually triggering the sanity
check in load_oid_from_graph().
Fix this by iterating through all entries in the Chunk Lookup table,
including the terminating label.
Note that this is the minimal fix, suitable for the maintenance track.
A better fix would be to simplify how the chunk sizes are calculated,
but that is a more invasive change, less suitable for 'maint', so that
will be done in later patches.
This additional flexibility of scanning more chunks breaks a test for
"git commit-graph verify" so alter that test to mutate the commit-graph
to have an even lower chunk count.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
should produce the same output whether $path is 'submod' or 'submod/'.
This has been fixed in commit 74b4f7f277 (tree-walk.c: ignore trailing
slash on submodule in tree_entry_interesting(), 2014-01-23).
Unfortunately, that commit had the unintended side effect to handle
'submod/anything' the same as 'submod' and 'submod/' as well, e.g.:
$ git log --oneline --name-only -- sha1collisiondetection/whatever 4125f78222 sha1dc: update from upstream
sha1collisiondetection 07a20f569b Makefile: fix unaligned loads in sha1dc with UBSan
sha1collisiondetection 23e37f8e9d sha1dc: update from upstream
sha1collisiondetection 86cfd61e6b sha1dc: optionally use sha1collisiondetection as a submodule
sha1collisiondetection
Fix this by rejecting submodules as partial pathnames when their
trailing slash is followed by anything.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Sun, 7 Jun 2020 10:21:06 +0000 (06:21 -0400)]
CodingGuidelines: specify Python 2.7 is the oldest version
In 0b4396f068 (git-p4: make python2.7 the oldest supported version,
2019-12-13), git-p4 was updated to only support 2.7 and newer. Since
Python 2.6 is pretty much ancient history, update CodingGuidelines to
show that 2.7 is the oldest version supported.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Sun, 7 Jun 2020 09:48:26 +0000 (05:48 -0400)]
t/README: avoid poor-man's small caps GIT
In 48a8c26c62 (Documentation: avoid poor-man's small caps GIT,
2013-01-21), the documentation was amended to spell Git's name as Git
when talking about the system as a whole. However, t/README was skipped
over when the treatment was applied.
Bring t/README into conformance with the CodingGuidelines by casing
"Git" properly.
While we're at it, fix a small typo. Change "the git internal" to "the
Git internals".
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh Steadmon [Fri, 5 Jun 2020 22:55:14 +0000 (15:55 -0700)]
fuzz-commit-graph: properly free graph struct
Use the provided free_commit_graph() to properly free the commit graph
in fuzz-commit-graph. Otherwise, the fuzzer itself leaks memory when the
struct contains pointers to allocated memory.
Signed-off-by: Josh Steadmon <steadmon@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: allow opening work trees from the startup dialog
In proc _is_git check that supplied path is a valid work tree path.
This allows the choose_repository::pick dialog to accept path to a
work tree directory.
Jonathan Tan [Fri, 5 Jun 2020 21:21:36 +0000 (14:21 -0700)]
http: redact all cookies, teach GIT_TRACE_REDACT=0
In trace output (when GIT_TRACE_CURL is true), redact the values of all
HTTP cookies by default. Now that auth headers (since the implementation
of GIT_TRACE_CURL in 74c682d3c6 ("http.c: implement the GIT_TRACE_CURL
environment variable", 2016-05-24)) and cookie values (since this
commit) are redacted by default in these traces, also allow the user to
inhibit these redactions through an environment variable.
Since values of all cookies are now redacted by default,
GIT_REDACT_COOKIES (which previously allowed users to select individual
cookies to redact) now has no effect.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Fri, 5 Jun 2020 18:23:48 +0000 (18:23 +0000)]
dir: fix treatment of negated pathspecs
do_match_pathspec() started life as match_pathspec_depth_1() and for
correctness was only supposed to be called from match_pathspec_depth().
match_pathspec_depth() was later renamed to match_pathspec(), so the
invariant we expect today is that do_match_pathspec() has no direct
callers outside of match_pathspec().
Unfortunately, this intention was lost with the renames of the two
functions, and additional calls to do_match_pathspec() were added in
commits 75a6315f74 ("ls-files: add pathspec matching for submodules",
2016-10-07) and 89a1f4aaf7 ("dir: if our pathspec might match files
under a dir, recurse into it", 2019-09-17). Of course,
do_match_pathspec() had an important advantge over match_pathspec() --
match_pathspec() would hardcode flags to one of two values, and these
new callers needed to pass some other value for flags. Also, although
calling do_match_pathspec() directly was incorrect, there likely wasn't
any difference in the observable end output, because the bug just meant
that fill_diretory() would recurse into unneeded directories. Since
subsequent does-this-path-match checks on individual paths under the
directory would cause those extra paths to be filtered out, the only
difference from using the wrong function was unnecessary computation.
The second of those bad calls to do_match_pathspec() was involved -- via
either direct movement or via copying+editing -- into a number of later
refactors. See commits 777b420347 ("dir: synchronize
treat_leading_path() and read_directory_recursive()", 2019-12-19), 8d92fb2927 ("dir: replace exponential algorithm with a linear one",
2020-04-01), and 95c11ecc73 ("Fix error-prone fill_directory() API; make
it only return matches", 2020-04-01). The last of those introduced the
usage of do_match_pathspec() on an individual file, and thus resulted in
individual paths being returned that shouldn't be.
The problem with calling do_match_pathspec() instead of match_pathspec()
is that any negated patterns such as ':!unwanted_path` will be ignored.
Add a new match_pathspec_with_flags() function to fulfill the needs of
specifying special flags while still correctly checking negated
patterns, add a big comment above do_match_pathspec() to prevent others
from misusing it, and correct current callers of do_match_pathspec() to
instead use either match_pathspec() or match_pathspec_with_flags().
One final note is that DO_MATCH_LEADING_PATHSPEC needs special
consideration when working with DO_MATCH_EXCLUDE. The point of
DO_MATCH_LEADING_PATHSPEC is that if we have a pathspec like
*/Makefile
and we are checking a directory path like
src/module/component
that we want to consider it a match so that we recurse into the
directory because it _might_ have a file named Makefile somewhere below.
However, when we are using an exclusion pattern, i.e. we have a pathspec
like
:(exclude)*/Makefile
we do NOT want to say that a directory path like
src/module/component
is a (negative) match. While there *might* be a file named 'Makefile'
somewhere below that directory, there could also be other files and we
cannot pre-emptively rule all the files under that directory out; we
need to recurse and then check individual files. Adjust the
DO_MATCH_LEADING_PATHSPEC logic to only get activated for positive
pathspecs.
Reported-by: John Millikin <jmillikin@stripe.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Xin Li [Fri, 5 Jun 2020 09:10:04 +0000 (02:10 -0700)]
check_repository_format_gently(): refuse extensions for old repositories
Previously, extensions were recognized regardless of repository format
version. If the user sets an undefined "extensions" value on a
repository of version 0 and that value is used by a future git version,
they might get an undesired result.
Because all extensions now also upgrade repository versions, tightening
the check would help avoid this for future extensions.
Signed-off-by: Xin Li <delphij@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Xin Li [Fri, 5 Jun 2020 09:10:03 +0000 (02:10 -0700)]
sparse-checkout: upgrade repository to version 1 when enabling extension
The 'extensions' configuration variable gets special meaning in the new
repository version, so when enabling the extension we should upgrade the
repository to version 1.
Signed-off-by: Xin Li <delphij@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Xin Li [Fri, 5 Jun 2020 09:10:02 +0000 (02:10 -0700)]
fetch: allow adding a filter after initial clone
Retroactively adding a filter can be useful for existing shallow clones as
they allow users to see earlier change histories without downloading all
git objects in a regular --unshallow fetch.
Without this patch, users can make a clone partial by editing the
repository configuration to convert the remote into a promisor, like:
Since the hard part of making this work is already in place and such
edits can be error-prone, teach Git to perform the required configuration
change automatically instead.
Note that this change does not modify the existing git behavior which
recognizes setting extensions.partialClone without changing
repositoryFormatVersion.
Signed-off-by: Xin Li <delphij@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Xin Li [Fri, 5 Jun 2020 09:10:01 +0000 (02:10 -0700)]
repository: add a helper function to perform repository format upgrade
In version 1 of repository format, "extensions" gained special meaning
and it is safer to avoid upgrading when there are pre-existing
extensions.
Make list-objects-filter to use the helper function instead of setting
repository version directly as a prerequisite of exposing the upgrade
capability.
Signed-off-by: Xin Li <delphij@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Fri, 5 Jun 2020 02:41:39 +0000 (02:41 +0000)]
sparse-checkout: avoid staging deletions of all files
sparse-checkout's purpose is to update the working tree to have it
reflect a subset of the tracked files. As such, it shouldn't be
switching branches, making commits, downloading or uploading data, or
staging or unstaging changes. Other than updating the worktree, the
only thing sparse-checkout should touch is the SKIP_WORKTREE bit of the
index. In particular, this sets up a nice invariant: running
sparse-checkout will never change the status of any file in `git status`
(reflecting the fact that we only set the SKIP_WORKTREE bit if the file
is safe to delete, i.e. if the file is unmodified).
Traditionally, we did a _really_ bad job with this goal. The
predecessor to sparse-checkout involved manual editing of
.git/info/sparse-checkout and running `git read-tree -mu HEAD`. That
command would stage and unstage changes and overwrite dirty changes in
the working tree.
The initial implementation of the sparse-checkout command was no better;
it simply invoked `git read-tree -mu HEAD` as a subprocess and had the
same caveats, though this issue came up repeatedly in review comments
and workarounds for the problems were put in place before the feature
was merged[1, 2, 3, 4, 5, 6; especially see 4 & 6].
However, these workarounds, in addition to disabling the feature in a
number of important cases, also missed one special case. I'll get back
to it later.
In the 2.27.0 cycle, the disabling of the feature was lifted by finally
replacing the internal equivalent of `git read-tree -mu HEAD` with
something that did what we wanted: the new update_sparsity() function in
unpack-trees.c that only ever updates SKIP_WORKTREE bits in the index
and updates the working tree to match. This new function handles all
the cases that were problematic for the old implementation, except that
it breaks the same special case that avoided the workarounds of the old
implementation, but broke it in a different way.
So...that brings us to the special case: a git clone performed with
--no-checkout. As per the meaning of the flag, --no-checkout does not
check out any branch, with the implication that you aren't on one and
need to switch to one after the clone. Implementationally, HEAD is
still set (so in some sense you are partially on a branch), but
* the index is "unborn" (non-existent)
* there are no files in the working tree (other than .git/)
* the next time git switch (or git checkout) is run it will run
unpack_trees with `initial_checkout` flag set to true.
It is not until you run, e.g. `git switch <somebranch>` that the index
will be written and files in the working tree populated.
With this special --no-checkout case, the traditional `read-tree -mu
HEAD` behavior would have done the equivalent of acting like checkout --
switch to the default branch (HEAD), write out an index that matches
HEAD, and update the working tree to match. This special case slipped
through the avoid-making-changes checks in the original sparse-checkout
command and thus continued there.
After update_sparsity() was introduced and used (see commit f56f31af03
("sparse-checkout: use new update_sparsity() function", 2020-03-27)),
the behavior for the --no-checkout case changed: Due to git's
auto-vivification of an empty in-memory index (see do_read_index() and
note that `must_exist` is false), and due to sparse-checkout's
update_working_directory() code to always write out the index after it
was done, we got a new bug. That made it so that sparse-checkout would
switch the repository from a clone with an "unborn" index (i.e. still
needing an initial_checkout), to one that had a recorded index with no
entries. Thus, instead of all the files appearing deleted in `git
status` being known to git as a special artifact of not yet being on a
branch, our recording of an empty index made it suddenly look to git as
though it was definitely on a branch with ALL files staged for deletion!
A subsequent checkout or switch then had to contend with the fact that
it wasn't on an initial_checkout but had a bunch of staged deletions.
Make sure that sparse-checkout changes nothing in the index other than
the SKIP_WORKTREE bit; in particular, when the index is unborn we do not
have any branch checked out so there is no sparsification or
de-sparsification work to do. Simply return from
update_working_directory() early.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 897d68e7af82 (Makefile: use curl-config --cflags, 2020-03-26), we
taught the build process to use `curl-config --cflags` to make sure that
it can find cURL's headers.
In the MSVC build, this is completely bogus because we're running in a
Git for Windows SDK whose `curl-config` supports the _GCC_ build.
Let's just ignore each and every `-I<path>` option where `<path>` points
to GCC/Clang specific headers.
Reported by Jeff Hostetler in
https://github.com/microsoft/git/issues/275.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: move allow_sideband_all to upload_pack_data
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'allow_sideband_all' static
variable into this struct.
It is used only by protocol v2 code.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: pass upload_pack_data to upload_pack_config()
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass that struct to upload_pack_config(),
so that this function can use all the fields of the struct.
This will be used in followup commits to move static variables
that are set in upload_pack_config() into 'upload_pack_data'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's take this opportunity to change the
'multi_ack' variable, which is now part of 'upload_pack_data',
to an enum.
This will make it clear which values this variable can take.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the multi_ack static variable into
this struct.
It is only used by protocol v0 code since protocol v2 assumes
certain baseline capabilities, but rolling it into
upload_pack_data and just letting v2 code ignore it as it does
now is more coherent and cleaner.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: move filter_capability_requested to upload_pack_data
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the filter_capability_requested
static variable into this struct.
It is only used by protocol v0 code since protocol v2 assumes
certain baseline capabilities, but rolling it into
upload_pack_data and just letting v2 code ignore it as it does
now is more coherent and cleaner.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the 'no_done', 'daemon_mode' and
'timeout' variables into this struct.
They are only used by protocol v0 code since protocol v2 assumes
certain baseline capabilities, but rolling them into
upload_pack_data and just letting v2 code ignore them as it does
now is more coherent and cleaner.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's annotate fields from this struct to let
people know which ones are used only for protocol v0 and which
ones only for protocol v2.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 4 Jun 2020 17:54:38 +0000 (19:54 +0200)]
upload-pack: actually use some upload_pack_data bitfields
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's actually start using some bitfields of
that struct. These bitfields were introduced in 3145ea957d
("upload-pack: introduce fetch server command", 2018-03-15), but
were never used.
We could instead have just removed the following bitfields
from the struct:
but using them makes it possible to remove a number of static
variables with the same name and purpose from 'upload-pack.c'.
This is a behavior change, as we accidentally used to let values
in those bitfields propagate from one v2 "fetch" command to
another for ssh/git/file connections (but not for http). That's
fixing a bug, but one nobody is likely to see, because it would
imply the client sending different capabilities for each request.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These statements are executed when both '--stdin-commits' and
'--progress' are passed. Introduce a trio of tests that exercise various
combinations of these options to ensure that these lines are covered.
More importantly, this is exercising a (somewhat) previously-ignored
feature of '--stdin-commits', which is that it respects '--progress'.
Prior to 5b6653e523 (builtin/commit-graph.c: dereference tags in
builtin, 2020-05-13), dereferencing input from '--stdin-commits' was
done inside of commit-graph.c.
Now that an additional progress meter may be generated from outside of
commit-graph.c, add a corresponding test to make sure that it also
respects '--[no]-progress'.
The other location that generates progress meter output (from d335ce8f24
(commit-graph.c: show progress of finding reachable commits,
2020-05-13)) is already covered by any test that passes '--reachable'.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 3 Jun 2020 22:21:07 +0000 (16:21 -0600)]
t5318: use 'test_must_be_empty'
A handful of tests in t5318 use 'test_line_count = 0 ...' to make sure
that some command does not write any output. While correct, it is more
idiomatic to use 'test_must_be_empty' instead. Switch the former
invocations to use the latter instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 2 Jun 2020 20:35:05 +0000 (13:35 -0700)]
Merge branch 'en/fast-import-looser-date'
Some repositories in the wild have commits that record nonsense
committer timezone (e.g. rails.git); "git fast-import" learned an
option to pass these nonsense timestamps intact to allow recreating
existing repositories as-is.
* en/fast-import-looser-date:
fast-import: add new --date-format=raw-permissive format
Junio C Hamano [Tue, 2 Jun 2020 20:35:03 +0000 (13:35 -0700)]
Merge branch 'lo/sparse-universal-zero-init'
We've adopted a convention that any on-stack structure can be
initialized to have zero values in all fields with "= { 0 }", even
when the first field happens to be a pointer, but sparse complained
that a null pointer should be spelled NULL for a long time. Start
using -Wno-universal-initializer option to squelch it.
* lo/sparse-universal-zero-init:
sparse: allow '{ 0 }' to be used without warnings
Junio C Hamano [Tue, 2 Jun 2020 20:35:01 +0000 (13:35 -0700)]
Merge branch 'jn/experimental-opts-into-proto-v2'
"feature.experimental" configuration variable is to let volunteers
easily opt into a set of newer features, which use of the v2
transport protocol is now a part of.
* jn/experimental-opts-into-proto-v2:
config: let feature.experimental imply protocol.version=2
Shourya Shukla [Tue, 2 Jun 2020 16:35:23 +0000 (22:05 +0530)]
submodule: port subcommand 'set-branch' from shell to C
Convert submodule subcommand 'set-branch' to a builtin and call it via
'git-submodule.sh'.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Helped-by: Denton Liu <liu.denton@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 1 Jun 2020 20:22:18 +0000 (16:22 -0400)]
diff: discard blob data from stat-unmatched pairs
When performing a tree-level diff against the working tree, we may find
that our index stat information is dirty, so we queue a filepair to be
examined later. If the actual content hasn't changed, we call this a
stat-unmatch; the stat information was out of date, but there's no
actual diff. Normally diffcore_std() would detect and remove these
identical filepairs via diffcore_skip_stat_unmatch(). However, when
"--quiet" is used, we want to stop the diff as soon as we see any
changes, so we check for stat-unmatches immediately in diff_change().
That check may require us to actually load the file contents into the
pair of diff_filespecs. If we find that the pair isn't a stat-unmatch,
then no big deal; we'd likely load the contents later anyway to generate
a patch, do rename detection, etc, so we want to hold on to it. But if
it is a stat-unmatch, then we have no more use for that data; the whole
point is that we're going discard the pair. However, we never free the
allocated diff_filespec data.
In most cases, keeping that data isn't a problem. We don't expect a lot
of stat-unmatch entries, and since we're using --quiet, we'd quit as
soon as we saw such a real change anyway. However, there are extreme
cases where it makes a big difference:
1. We'd generally mmap() the working tree half of the pair. And since
the OS may limit the total number of maps, we can run afoul of this
in large repositories. E.g.:
It should be unusual to have so many files stat-dirty, but it's
possible if you've just run a script like "sed -i" or similar.
After this patch, the above correctly exits with code 0.
2. Even if you don't hit mmap limits, the index half of the pair will
have been pulled from the object database into heap memory. Again
in a clone of linux.git, running:
peaks at 145MB heap before this patch, and 94MB after.
This patch solves the problem by freeing any diff_filespec data we
picked up during the "--quiet" stat-unmatch check in diff_changes.
Nobody is going to need that data later, so there's no point holding on
to it. There are a few things to note:
- we could skip queueing the pair entirely, which could in theory save
a little work. But there's not much to save, as we need a
diff_filepair to feed to diff_filespec_check_stat_unmatch() anyway.
And since we cache the result of the stat-unmatch checks, a later
call to diffcore_skip_stat_unmatch() call will quickly skip over
them. The diffcore code also counts up the number of stat-unmatched
pairs as it removes them. It's doubtful any callers would care about
that in combination with --quiet, but we'd have to reimplement the
logic here to be on the safe side. So it's not really worth the
trouble.
- I didn't write a test, because we always produce the correct output
unless we run up against system mmap limits, which are both
unportable and expensive to test against. Measuring peak heap
would be interesting, but our perf suite isn't yet capable of that.
- note that diff without "--quiet" does not suffer from the same
problem. In diffcore_skip_stat_unmatch(), we detect the stat-unmatch
entries and drop them immediately, so we're not carrying their data
around.
- you _can_ still trigger the mmap limit problem if you truly have
that many files with actual changes. But it's rather unlikely. The
stat-unmatch check avoids loading the file contents if the sizes
don't match, so you'd need a pretty trivial change in every single
file. Likewise, inexact rename detection might load the data for
many files all at once. But you'd need not just 64k changes, but
that many deletions and additions. The most likely candidate is
perhaps break-detection, which would load the data for all pairs and
keep it around for the content-level diff. But again, you'd need 64k
actually changed files in the first place.
So it's still possible to trigger this case, but it seems like "I
accidentally made all my files stat-dirty" is the most likely case
in the real world.
Reported-by: Jan Christoph Uhde <Jan@UhdeJc.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
