brian m. carlson [Sat, 22 Feb 2020 20:17:31 +0000 (20:17 +0000)]
t: use hash-specific lookup tables to define test constants
In the future, we'll allow developers to run the testsuite with a hash
algorithm of their choice. To make this easier, compute the fixed
constants using test_oid. Move the constant initialization down below
the point where test-lib-functions.sh is loaded so the functions are
defined.
Note that we don't provide a value for the OID_REGEX value directly
because writing a large number of instances of "[0-9a-f]" in the
oid-info files is unwieldy and there isn't a way to compute it based on
those values. Instead, compute it based on ZERO_OID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Sat, 22 Feb 2020 20:17:30 +0000 (20:17 +0000)]
repository: require a build flag to use SHA-256
At this point, SHA-256 support is experimental and some behavior may
change. To avoid surprising unsuspecting users, require a build flag,
ENABLE_SHA256, to allow use of a non-SHA-1 algorithm. Enable this flag
by default when the DEVELOPER make flag is set so that contributors can
test this case adequately.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Sat, 22 Feb 2020 20:17:29 +0000 (20:17 +0000)]
hex: add functions to parse hex object IDs in any algorithm
There are some places where we need to parse a hex object ID in any
algorithm without knowing beforehand which algorithm is in use. An
example is when parsing fast-import marks.
Add a get_oid_hex_any to parse an object ID and return the algorithm it
belongs to, and additionally add parse_oid_hex_any which is the
equivalent change for parse_oid_hex. If the object is not parseable, we
return GIT_HASH_UNKNOWN.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce variants of get_oid_hex and parse_oid_hex that parse an
arbitrary hash algorithm, implementing internal functions to avoid
duplication. These functions can be used in the transport code to parse
refs properly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Sat, 22 Feb 2020 20:17:27 +0000 (20:17 +0000)]
hash: implement and use a context cloning function
For all of our SHA-1 implementations and most of our SHA-256
implementations, the hash context we use is a real struct. For these
implementations, it's possible to copy a hash context by making a copy
of the struct.
However, for our libgcrypt implementation, our hash context is a
pointer. Consequently, copying it does not lead to an independent hash
context like we intended.
Fortunately, however, libgcrypt provides us with a handy function to
copy hash contexts. Let's add a cloning function to the hash algorithm
API, and use it in the one place we need to make a hash context copy.
With this change, our libgcrypt SHA-256 implementation is fully
functional with all of our other hash implementations.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 22 Feb 2020 18:51:19 +0000 (19:51 +0100)]
use strpbrk(3) to search for characters from a given set
We can check if certain characters are present in a string by calling
strchr(3) on each of them, or we can pass them all to a single
strpbrk(3) call. The latter is shorter, less repetitive and slightly
more efficient, so let's do that instead.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Fri, 21 Feb 2020 21:47:28 +0000 (21:47 +0000)]
partial-clone: avoid fetching when looking for objects
When using partial clone, find_non_local_tags() in builtin/fetch.c
checks each remote tag to see if its object also exists locally. There
is no expectation that the object exist locally, but this function
nevertheless triggers a lazy fetch if the object does not exist. This
can be extremely expensive when asking for a commit, as we are
completely removed from the context of the non-existent object and
thus supply no "haves" in the request.
6462d5eb9a (fetch: remove fetch_if_missing=0, 2019-11-05) removed a
global variable that prevented these fetches in favor of a bitflag.
However, some object existence checks were not updated to use this flag.
Update find_non_local_tags() to use OBJECT_INFO_SKIP_FETCH_OBJECT in
addition to OBJECT_INFO_QUICK. The _QUICK option only prevents
repreparing the pack-file structures. We need to be extremely careful
about supplying _SKIP_FETCH_OBJECT when we expect an object to not exist
due to updated refs.
This resolves a broken test in t5616-partial-clone.sh.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Fri, 21 Feb 2020 21:47:27 +0000 (21:47 +0000)]
partial-clone: demonstrate bugs in partial fetch
While testing partial clone, I noticed some odd behavior. I was testing
a way of running 'git init', followed by manually configuring the remote
for partial clone, and then running 'git fetch'. Astonishingly, I saw
the 'git fetch' process start asking the server for multiple rounds of
pack-file downloads! When tweaking the situation a little more, I
discovered that I could cause the remote to hang up with an error.
Add two tests that demonstrate these two issues.
In the first test, we find that when fetching with blob filters from
a repository that previously did not have any tags, the 'git fetch
--tags origin' command fails because the server sends "multiple
filter-specs cannot be combined". This only happens when using
protocol v2.
In the second test, we see that a 'git fetch origin' request with
several ref updates results in multiple pack-file downloads. This must
be due to Git trying to fault-in the objects pointed by the refs. What
makes this matter particularly nasty is that this goes through the
do_oid_object_info_extended() method, so there are no "haves" in the
negotiation. This leads the remote to send every reachable commit and
tree from each new ref, providing a quadratic amount of data transfer!
This test is fixed if we revert 6462d5eb9a (fetch: remove
fetch_if_missing=0, 2019-11-05), but that revert causes other test
failures. The real fix will need more care.
The tests are ordered in this way because if I swap the test order the
tag test will succeed instead of fail. I believe this is because somehow
we need the srv.bare repo to not have any tags when we clone, but then
have tags in our next fetch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 21 Feb 2020 02:56:37 +0000 (21:56 -0500)]
run-command.h: fix mis-indented struct member
An accidental conversion of a tab to 4 spaces snuck into 4c4066d95d
(run-command: move doc to run-command.h, 2019-11-17), messing up the
alignment when you have the project-recommended 8-width tabstops. Let's
revert that line.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 20 Feb 2020 17:34:36 +0000 (09:34 -0800)]
describe: force long format for a name based on a mislocated tag
An annotated tag has two names: where it sits in the refs/tags
hierarchy and the tagname recorded in the "tag" field in the object
itself. They usually should match.
Since 212945d4 ("Teach git-describe to verify annotated tag names
before output", 2008-02-28), a commit described using an annotated
tag bases its name on the tagname from the object. While this was a
deliberate design decision to make it easier to converse about tags
with others, even if the tags happen to be fetched to a different
name than it was given by its creator, it had one downside.
The output from "git describe", at least in the modern Git, should
be usable as an object name to name the exact commit given to the
"git describe" command. Using the tagname, when two names differ,
breaks this property, when describing a commit that is directly
pointed at by such a tag. An annotated tag Bob made as "v1.0" may
sit at "refs/tags/v1.0-bob" in the ref hierarchy, and output from
"git describe v1.0-bob^0" would say "v1.0", but there may not be
any tag at "refs/tags/v1.0" locally or there may be another tag that
points at a different object.
Note that this won't be a problem if a commit being described is not
directly pointed at by such a mislocated tag. In the example in the
previous paragraph, describing a commit whose parent is v1.0-bob
would result in "v1.0" (i.e. the tagname taken from the tag object)
followed by "-1-gXXXXX" where XXXXX is the abbreviated object name,
and a string that ends with "-g" followed by a hexadecimal string is
an object name for the object whose name begins with hexadecimal
string (as long as it is unique), so it does not matter if the
leading part is "v1.0" or "v1.0-bob".
Show the name in the long format, i.e. with "-0-gXXXXX" suffix, when
the name we give is based on a mislocated annotated tag to ensure
that the output can be used as the object name for the object
originally given to the command to fix the issue.
While at it, remove an overly cautious dead code to protect against
an annotated tag object without the tagname. Such a tag is filtered
out much earlier in the codeflow, and will not reach this part of
the code.
Helped-by: Matheus Tavares <matheus.bernardino@usp.br> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 20 Feb 2020 20:07:06 +0000 (20:07 +0000)]
sparse-checkout: allow one-character directories in cone mode
In 9e6d3e64 (sparse-checkout: detect short patterns, 2020-01-24), a
condition on the minimum length of a cone-mode pattern was introduced.
However, this condition was off-by-one.
If we have a directory with a single character, say "b", then the
command
git sparse-checkout set b
will correctly add the pattern "/b/" to the sparse-checkout file. When
this is interpeted in dir.c, the pattern is "/b" with the
PATTERN_FLAG_MUSTBEDIR flag. This string has length two, which satisfies
our inclusive inequality (<= 2).
The reason for this inequality is that we will start to read the pattern
string character-by-character using three char pointers: prev, cur,
next. In particular, next is set to the current pattern plus two. The
mistake was that next will still be a valid pointer when the pattern
length is two, since the string is null-terminated.
Make this inequality strict so these patterns work.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paolo Bonzini [Thu, 20 Feb 2020 14:15:19 +0000 (15:15 +0100)]
am: support --show-current-patch=diff to retrieve .git/rebase-apply/patch
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output of "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable
or base64. Add a new mode to "git am --show-current-patch" in order to
straighten the suggestion.
Reported-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paolo Bonzini [Thu, 20 Feb 2020 14:15:18 +0000 (15:15 +0100)]
am: support --show-current-patch=raw as a synonym for--show-current-patch
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable or
base64. To simplify worktree operations and to avoid that users poke into
.git, it would be better if "git am" also provided a mode that copies
.git/rebase-merge/patch to stdout.
One possibility could be to have completely separate options, introducing
for example --show-current-message (for .git/rebase-apply/NNNN)
and --show-current-diff (for .git/rebase-apply/patch), while possibly
deprecating --show-current-patch.
That would even remove the need for the first two patches in the series.
However, the long common prefix would have prevented using an abbreviated
option such as "--show". Therefore, I chose instead to add a string
argument to --show-current-patch. The new argument is optional, so that
"git am --show-current-patch"'s behavior remains backwards-compatible.
The next choice to make is how to handle multiple --show-current-patch
options. Right now, something like "git am --abort --show-current-patch"
is rejected, and the previous suggestion would likewise have naturally
rejected a command line like
git am --show-current-message --show-current-diff
Therefore, I decided to also reject for example
git am --show-current-patch=diff --show-current-patch=raw
In other words the whole of --show-current-patch=xxx (including the
optional argument) is treated as the command mode. I found this to be
more consistent and intuitive, even though it differs from the usual
"last one wins" semantics of the git command line.
Add the code to parse submodes based on the above design, where for now
"raw" is the only valid submode. "raw" prints the full e-mail message
just like "git am --show-current-patch".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paolo Bonzini [Thu, 20 Feb 2020 14:15:17 +0000 (15:15 +0100)]
am: convert "resume" variable to a struct
This will allow stashing the submode of --show-current-patch from a
callback function. Using a struct will allow accessing both fields from
outside cmd_am (through container_of).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paolo Bonzini [Thu, 20 Feb 2020 14:15:16 +0000 (15:15 +0100)]
parse-options: convert "command mode" to a flag
OPTION_CMDMODE is essentially OPTION_SET_INT plus an extra check that
the variable had not set before. In order to allow custom processing
of the option, for example a "command mode" option that also has an
argument, it would be nice to use OPTION_CALLBACK and not have to rewrite
the extra check on incompatible options. In other words, making the
processing of the option orthogonal to the "only one of these" behavior
provided by OPTION_CMDMODE.
Add a new flag that takes care of the check, and modify OPT_CMDMODE to
use it together with OPTION_SET_INT. The new flag still requires that the
option value points to an int, but any OPTION_* value can be specified as
long as it does not require a non-int type for opt->value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 20 Feb 2020 02:24:13 +0000 (02:24 +0000)]
credential: allow wildcard patterns when matching config
In some cases, a user will want to use a specific credential helper for
a wildcard pattern, such as https://*.corp.example.com. We have code
that handles this already with the urlmatch code, so let's use that
instead of our custom code.
Since the urlmatch code is a superset of our current matching in terms
of capabilities, there shouldn't be any cases of things that matched
previously that don't match now. However, in addition to wildcard
matching, we now use partial path matching, which can cause slightly
different behavior in the case that a helper applies to the prefix
(considering path components) of the remote URL. While different, this
is probably the behavior people were wanting anyway.
Since we're using the urlmatch code, we need to encode the components
we've gotten into a URL to match, so add a function to percent-encode
data and format the URL with it. We now also no longer need to the
custom code to match URLs, so let's remove it.
Additionally, the urlmatch code always looks for the best match, whereas
we want all matches for credential helpers to preserve existing
behavior. Let's add an optional field, select_fn, that lets us control
which items we want (in this case, all of them) and default it to the
best-match code that already exists for other users.
Signed-off-by: brian m. carlson <bk2204@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 20 Feb 2020 02:24:12 +0000 (02:24 +0000)]
credential: use the last matching username in the config
Everywhere else in the codebase, we use the rule that the last matching
configuration option is the one that takes effect. This is helpful
because it allows more specific configuration settings (e.g., per-repo
configuration) to override less specific settings (e.g., per-user
configuration).
However, in the credential code, we didn't honor this setting, and
instead picked the first setting we had, and stuck with it. This was
likely to ensure we picked the value from the URL, which we want to
honor over the configuration.
It's possible to do both, though, so let's check if the value is the one
we've gotten over our protocol connection, which if present will have
come from the URL, and keep it if so. Otherwise, let's overwrite the
value with the latest version we've got from the configuration, so we
keep the last configuration value.
Signed-off-by: brian m. carlson <bk2204@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 20 Feb 2020 02:24:11 +0000 (02:24 +0000)]
t0300: add tests for some additional cases
There are some tricky cases in our credential helpers that we don't have
test cases for. To help prevent regressions, let's add some for these
cases:
* If there are multiple configured credential helpers, one without a
path and one with a path, we want to invoke both of them.
* If there are percent-encoded values in the URL, we handle them
properly.
* And finally, if there is a username in the remote URL, we want to
honor that over what the configuration tells us.
Finally, there's an additional case that we'd like to test for as well,
but that currently fails. In all other situations in our configuration,
we pick the last configuration setting that's provided. However, we
fail to do that for credential.username, where we pick the first setting
instead. Let's add a failing test that we have the consistent behavior
here, since that's the documented, expected behavior.
Signed-off-by: brian m. carlson <bk2204@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 20 Feb 2020 02:24:10 +0000 (02:24 +0000)]
t1300: add test for urlmatch with multiple wildcards
Our urlmatch code handles multiple wildcards, but we don't currently
have a test that checks this code path. Add a test that we handle this
case correctly to avoid any regressions.
Signed-off-by: brian m. carlson <bk2204@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 20 Feb 2020 02:24:09 +0000 (02:24 +0000)]
mailmap: add an additional email address for brian m. carlson
To more accurately track the provenance of contributions, brian uses a
work email address for commits created at work. Add this email address
to .mailmap so that contributions are properly attributed to the same
person.
Signed-off-by: brian m. carlson <bk2204@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Mon, 17 Feb 2020 04:53:05 +0000 (04:53 +0000)]
unpack-trees: check for missing submodule directory in merged_entry
Using `git checkout --recurse-submodules` to switch between a
branch with no submodules and a branch with initialized nested
submodules currently causes a fatal error:
$ git checkout --recurse-submodules branch-with-nested-submodules
fatal: exec '--super-prefix=submodule/nested/': cd to 'nested'
failed: No such file or directory
error: Submodule 'nested' could not be updated.
error: Submodule 'submodule/nested' cannot checkout new HEAD.
error: Submodule 'submodule' could not be updated.
M submodule
Switched to branch 'branch-with-nested-submodules'
The checkout succeeds but the worktree and index of the first level
submodule are left empty:
$ cd submodule
$ git -c status.submoduleSummary=1 status
HEAD detached at b3ce885
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
deleted: .gitmodules
deleted: first.t
deleted: nested
fatal: not a git repository: 'nested/.git'
Submodule changes to be committed:
The reason for the fatal error during the checkout is that a child git
process tries to cd into the yet unexisting nested submodule directory.
The sequence is the following:
1. The main git process (the one running in the superproject) eventually
reaches write_entry() in entry.c, which creates the first level
submodule directory and then calls submodule_move_head() in submodule.c,
which spawns `git read-tree` in the submodule directory.
2. The first child git process (the one in the submodule of the
superproject) eventually calls check_submodule_move_head() at
unpack_trees.c:2021, which calls submodule_move_head in dry-run mode,
which spawns `git read-tree` in the nested submodule directory.
3. The second child git process tries to chdir() in the yet unexisting
nested submodule directory in start_command() at run-command.c:829 and
dies before exec'ing.
The reason why check_submodule_move_head() is reached in the first child
and not in the main process is that it is inside an
if(submodule_from_ce()) construct, and submodule_from_ce() returns a
valid struct submodule pointer, whereas it returns a null pointer in the
main git process.
The reason why submodule_from_ce() returns a null pointer in the main
git process is because the call to cache_lookup_path() in config_from()
(called from submodule_from_path() in submodule_from_ce()) returns a
null pointer since the hashmap "for_path" in the submodule_cache of
the_repository is not yet populated. It is not populated because both
repo_get_oid(repo, GITMODULES_INDEX, &oid) and repo_get_oid(repo,
GITMODULES_HEAD, &oid) in config_from_gitmodules() at
submodule-config.c:639-640 return -1, as at this stage of the operation,
neither the HEAD of the superproject nor its index contain any
.gitmodules file.
In contrast, in the first child the hashmap is populated because
repo_get_oid(repo, GITMODULES_HEAD, &oid) returns 0 as the HEAD of the
first level submodule, i.e. .git/modules/submodule/HEAD, points to a
commit where .gitmodules is present and records 'nested' as a submodule.
Fix this bug by checking that the submodule directory exists before
calling check_submodule_move_head() in merged_entry() in the `if(!old)`
branch, i.e. if going from a commit with no submodule to a commit with a
submodule present.
Also protect the other call to check_submodule_move_head() in
merged_entry() the same way as it is safer, even though the `else if
(!(old->ce_flags & CE_CONFLICTED))` branch of the code is not at play in
the present bug.
The other calls to check_submodule_move_head() in other functions in
unpack_trees.c are all already protected by calls to lstat() somewhere
in
the program flow so we don't need additional protection for them.
All commands in the unpack_trees machinery are affected, i.e. checkout,
reset and read-tree when called with the --recurse-submodules flag.
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com> Reported-by: Damien Robert <damien.olivier.robert@gmail.com> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Mon, 17 Feb 2020 04:53:04 +0000 (04:53 +0000)]
unpack-trees: remove outdated description for verify_clean_submodule
The function verify_clean_submodule() learned to verify if a submodule
working tree is clean in a7bc845a9a (unpack-trees: check if we can
perform the operation for submodules, 2017-03-14), but the commented
description above it was not updated to reflect that, such that this
description has been outdated since then.
Since Git has now learned to optionnally recursively check out
submodules during a superproject checkout, remove this outdated
description.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Mon, 17 Feb 2020 04:53:03 +0000 (04:53 +0000)]
t/lib-submodule-update: move a test to the right section
The test "$command: submodule branch is not changed, detach HEAD
instead" is in the "Appearing submodule" section of
test_submodule_recursing_with_args_common(), but this test updates a
submodule; it does not test a transition from a state with no submodule
to a state with a submodule.
As such, for consistency, move it to the "Modified submodule" section of
the same function. While at it, add a comment describing the test.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Mon, 17 Feb 2020 04:53:02 +0000 (04:53 +0000)]
t/lib-submodule-update: remove outdated test description
The commands in the unpack_trees machinery (checkout, reset, read-tree)
were fixed in 218c883783 (submodule: properly recurse for read-tree and
checkout, 2017-05-02) to correctly update nested submodules when called
with the `--recurse-submodules` flag.
However, a comment in t/lib-submodule-update.sh mentions that this use
case still doesn't work.
Remove this outdated comment.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Mon, 17 Feb 2020 04:53:01 +0000 (04:53 +0000)]
t7112: remove mention of KNOWN_FAILURE_SUBMODULE_RECURSIVE_NESTED
The known failure mode KNOWN_FAILURE_SUBMODULE_RECURSIVE_NESTED was
removed from lib-submodule-update.sh in 218c883783 (submodule: properly
recurse for read-tree and checkout, 2017-05-02) but at that time this
change was not ported over to topic sb/reset-recurse-submodules, such
that when this topic was merged in 5f074ca7e8 (Merge branch
'sb/reset-recurse-submodules', 2017-05-29), t7112-reset-submodules.sh
kept a mention of this removed failure mode.
Remove it now, as it does not mean anything anymore.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
stash push: support the --pathspec-from-file option
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `-`. Such use case is not
really expected.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate crude option parsing and rely on real parsing instead, because
1) Crude parsing is crude, for example it's not capable of
handling things like `git stash -m Message`
2) Adding options in two places is inconvenient and prone to bugs
As a side result, the case of `git stash -m Message` gets fixed.
Also give a good error message instead of just throwing usage at user.
----
Some review of what's been happening to this code:
Before [1], `git-stash.sh` only verified that all args begin with `-` :
# The default command is "push" if nothing but options are given
seen_non_option=
for opt
do
case "$opt" in
--) break ;;
-*) ;;
*) seen_non_option=t; break ;;
esac
done
Later, [1] introduced the duplicate code I'm now removing, also making
the previous test more strict by white-listing options.
----
[1] Commit 40af1468 ("stash: convert `stash--helper.c` into `stash.c`" 2019-02-26)
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Together with the previous patch, this brings docs for `git stash` to
the common layout used for most other commands (see for example docs
for `git add`, `git commit`, `git checkout`, `git reset`) where all
options are documented in a separate list.
After some thinking and having a look at docs for `git svn` and
`git `submodule`, I have arrived at following conclusions:
* Options should be described in a list rather then text to
facilitate lookup for user.
* Single list is better then multiple lists because it avoids
copy&pasting descriptions between subcommands (or, without
copy&pasting, user will have to look up missing options in other
subcommands).
* As a consequence, commands section should only give brief info and
list possible options. Since options have good enough names, user
will only need to look up the "interesting" options.
* Every option should list which subcommands support it.
I have decided to use alphabetical sorting in the list of options to
facilitate lookup for user.
There is some text editing done to make old descriptions better fit
into the list-style format.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) It is not allowed to pass pathspec in both args and file.
Adjustments were needed for `if (!argc)` block:
This code actually means "pathspec is not present". Previously, pathspec
could only come from commandline arguments, so testing for `argc` was a
valid way of testing for the presence of pathspec. But this is no longer
true with `--pathspec-from-file`.
During the entire `--pathspec-from-file` story, I tried to keep its
behavior very close to giving pathspec on commandline, so that switching
from one to another doesn't involve any surprises.
However, throwing usage at user in the case of empty
`--pathspec-from-file` would puzzle because there's nothing wrong with
"usage" (that is, argc/argv array).
On the other hand, throwing usage in the old case also feels bad to me.
While it's less of a puzzle, I (as user) never liked the experience of
comparing my commandline to "usage", trying to spot a difference. Since
it's already known what the error is, it feels a lot better to give that
specific error to user.
Judging from [1] it doesn't seem that showing usage in this case was
important (the patch was to avoid segfault), and it doesn't fit into how
other commands react to empty pathspec (see for example `git add` with a
custom message).
Therefore, I decided to show new error text in both cases. In order to
continue testing for error early, I moved `parse_pathspec()` higher. Now
it happens before `read_cache()` / `hold_locked_index()` /
`setup_work_tree()`, which shouldn't cause any issues.
Elijah Newren [Wed, 19 Feb 2020 17:04:07 +0000 (17:04 +0000)]
merge-recursive: fix the refresh logic in update_file_flags
If we need to delete a higher stage entry in the index to place the file
at stage 0, then we'll lose that file's stat information. In such
situations we may still be able to detect that the file on disk is the
version we want (as noted by our comment in the code:
/* do not overwrite file if already present */
), but we do still need to update the mtime since we are creating a new
cache_entry for that file. Update the logic used to determine whether
we refresh a file's mtime.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 19 Feb 2020 17:04:06 +0000 (17:04 +0000)]
t3433: new rebase testcase documenting a stat-dirty-like failure
A user discovered a case where they had a stack of 20 simple commits to
rebase, and the rebase would succeed in picking the first commit and
then error out with a pair of "Could not execute the todo command" and
"Your local changes to the following files would be overwritten by
merge" messages.
Their steps actually made use of the -i flag, but I switched it over to
-m to make it simpler to trigger the bug. With that flag, it bisects
back to commit 68aa495b590d (rebase: implement --merge via the
interactive machinery, 2018-12-11), but that's misleading. If you
change the -m flag to --keep-empty, then the problem persists and will
bisect back to 356ee4659bb5 (sequencer: try to commit without forking
'git commit', 2017-11-24)
After playing with the testcase for a bit, I discovered that added
--exec "sleep 1" to the command line makes the rebase succeed, making me
suspect there is some kind of discard and reloading of caches that lead
us to believe that something is stat dirty, but I didn't succeed in
digging any further than that.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Mon, 17 Feb 2020 08:40:39 +0000 (09:40 +0100)]
bisect: libify `bisect_next_all`
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
All the functions calling `bisect_next_all()` are already able to
handle return values from it.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Mon, 17 Feb 2020 08:40:38 +0000 (09:40 +0100)]
bisect: libify `handle_bad_merge_base` and its dependents
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
Update all callers to handle the error returns.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Mon, 17 Feb 2020 08:40:37 +0000 (09:40 +0100)]
bisect: libify `check_good_are_ancestors_of_bad` and its dependents
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
Code that turns BISECT_INTERNAL_SUCCESS_MERGE_BASE (-11)
to BISECT_OK (0) from `check_good_are_ancestors_of_bad()` has been moved to
`cmd_bisect__helper()`.
Update all callers to handle the error returns.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Mon, 17 Feb 2020 08:40:36 +0000 (09:40 +0100)]
bisect: libify `check_merge_bases` and its dependents
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
In `check_merge_bases()` there is an early success special case,
so we have introduced special error code
BISECT_INTERNAL_SUCCESS_MERGE_BASE (-11) which indicates early
success. This BISECT_INTERNAL_SUCCESS_MERGE_BASE is converted back
to BISECT_OK (0) in `check_good_are_ancestors_of_bad()`.
Update all callers to handle the error returns.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Mon, 17 Feb 2020 08:40:35 +0000 (09:40 +0100)]
bisect: libify `bisect_checkout`
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
Turn `exit()` to `return` calls in `bisect_checkout()`.
Changes related to return values have no bad side effects on the
code that calls `bisect_checkout()`.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Mon, 17 Feb 2020 08:40:34 +0000 (09:40 +0100)]
bisect: libify `exit_if_skipped_commits` to `error_if_skipped*` and its dependents
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
Update all callers to handle the error returns.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Mon, 17 Feb 2020 08:40:33 +0000 (09:40 +0100)]
bisect--helper: return error codes from `cmd_bisect__helper()`
Since we want to get rid of git-bisect.sh, it would be necessary
to convert bisect.c exit() calls to return statements so
that errors can be reported. Let's prepare for that by making
it possible to return different error codes than just 0 or 1.
Different error codes might enable a bisecting script calling the
bisect command that uses this function to do different things
depending on the exit status of the bisect command.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miriam Rubio [Mon, 17 Feb 2020 08:40:32 +0000 (09:40 +0100)]
bisect: add enum to represent bisect returning codes
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Create an enum called `bisect_error` with the bisecting return codes
to use in `bisect.c` libification process.
Change bisect_next_all() to make it return this enum.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miriam Rubio [Mon, 17 Feb 2020 08:40:30 +0000 (09:40 +0100)]
bisect: use the standard 'if (!var)' way to check for 0
Instead of using 'var == 0' in an if condition, let's use '!var' and
make 'bisect.c' more consistent with the rest of the code.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miriam Rubio [Mon, 17 Feb 2020 08:40:28 +0000 (09:40 +0100)]
bisect--helper: convert `vocab_*` char pointers to char arrays
Instead of using a pointer that points at a constant string,
just give name directly to the constant string; this way, we
do not have to allocate a pointer variable in addition to
the string we want to use.
Let's convert `vocab_bad` and `vocab_good` char pointers to char arrays.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 18 Feb 2020 23:05:37 +0000 (23:05 +0000)]
check-ignore: fix documentation and implementation to match
check-ignore has two different modes, and neither of these modes has an
implementation that matches the documentation. These modes differ in
whether they just print paths or whether they also print the final
pattern matched by the path. The fix is different for both modes, so
I'll discuss both separately.
=== First (default) mode ===
The first mode is documented as:
For each pathname given via the command-line or from a file via
--stdin, check whether the file is excluded by .gitignore (or other
input files to the exclude mechanism) and output the path if it is
excluded.
However, it fails to do this because it did not account for negated
patterns. Commands other than check-ignore verify exclusion rules via
calling
The fact that the latter does not include the call to is_excluded()
means that it is susceptible to to messing up negated patterns (since
that is the only significant thing is_excluded() adds over
last_matching_pattern()). Unfortunately, we can't make it just call
is_excluded(), because the same codepath is used by the verbose mode
which needs to know the matched pattern in question. This brings us
to...
=== Second (verbose) mode ===
The second mode, known as verbose mode, references the first in the
documentation and says:
Also output details about the matching pattern (if any) for each
given pathname. For precedence rules within and between exclude
sources, see gitignore(5).
The "Also" means it will print patterns that match the exclude rules as
noted for the first mode, and also print which pattern matches. Unless
more information is printed than just pathname and pattern (which is not
done), this definition is somewhat ill-defined and perhaps even
self-contradictory for negated patterns: A path which matches a negated
exclude pattern is NOT excluded and thus shouldn't be printed by the
former logic, while it certainly does match one of the explicit patterns
and thus should be printed by the latter logic.
=== Resolution ==
Since the second mode exists to find out which pattern matches given
paths, and showing the user a pattern that begins with a '!' is
sufficient for them to figure out whether the pattern is excluded, the
existing behavior is desirable -- we just need to update the
documentation to match the implementation (i.e. it is about printing
which pattern is matched by paths, not about showing which paths are
excluded).
For the first or default mode, users just want to know whether a pattern
is excluded. As such, the existing documentation is desirable; change
the implementation to match the documented behavior.
Finally, also adjust a few tests in t0008 that were caught up by this
discrepancy in how negated paths were handled.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 18 Feb 2020 21:40:09 +0000 (16:40 -0500)]
doc-diff: use single-colon rule in rendering Makefile
When rendering the troff manpages to text via "man", we create an ad-hoc
Makefile and feed it to "make". The purpose here is two-fold:
- reuse results from a prior interrupted render of the same tree
- use make's -j option to build in parallel
But the second part doesn't seem to work (at least with my version of
GNU make, 4.2.1). It just runs one render at a time.
We use a double-colon "all" rule for each file, like:
all:: foo
foo:
...actual render recipe...
all:: bar
bar:
...actual render recipe...
...and so on...
And it's this double-colon that seems to inhibit the parallelism. We can
just switch to a regular single-colon rule. Even though we do have
multiple rules for "all" here, we don't have any recipe to execute for
"all" (we only care about triggering its dependencies), so the
distinction is irrelevant.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 18 Feb 2020 21:25:37 +0000 (16:25 -0500)]
doc/config/push: use longer "--" line for preformatted example
The example for the push.pushOption config tries to create a
preformatted section, but uses only two dashes in its "--" line. In
AsciiDoc this is an "open block", with no type; the lines end up jumbled
because they're formatted as paragraphs. We need four or more dashes to
make it a "listing block" that will respect the linebreaks.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 17 Feb 2020 21:22:17 +0000 (13:22 -0800)]
Merge branch 'jk/mailinfo-cleanup'
Code clean-up.
* jk/mailinfo-cleanup:
mailinfo: factor out some repeated header handling
mailinfo: be more liberal with header whitespace
mailinfo: simplify parsing of header values
mailinfo: treat header values as C strings
Junio C Hamano [Mon, 17 Feb 2020 21:22:17 +0000 (13:22 -0800)]
Merge branch 'mr/show-config-scope'
"git config" learned to show in which "scope", in addition to in
which file, each config setting comes from.
* mr/show-config-scope:
config: add '--show-scope' to print the scope of a config value
submodule-config: add subomdule config scope
config: teach git_config_source to remember its scope
config: preserve scope in do_git_config_sequence
config: clarify meaning of command line scoping
config: split repo scope to local and worktree
config: make scope_name non-static and rename it
t1300: create custom config file without special characters
t1300: fix over-indented HERE-DOCs
config: fix typo in variable name
Junio C Hamano [Mon, 17 Feb 2020 21:22:16 +0000 (13:22 -0800)]
Merge branch 'bc/hash-independent-tests-part-8'
Preparation for SHA-256 migration continues.
* bc/hash-independent-tests-part-8: (21 commits)
t6024: update for SHA-256
t6006: make hash size independent
t6000: abstract away SHA-1-specific constants
t5703: make test work with SHA-256
t5607: make hash size independent
t5318: update for SHA-256
t5515: make test hash independent
t5321: make test hash independent
t5313: make test hash independent
t5309: make test hash independent
t5302: make hash size independent
t4060: make test work with SHA-256
t4211: add test cases for SHA-256
t4211: move SHA-1-specific test cases into a directory
t4013: make test hash independent
t3311: make test work with SHA-256
t3310: make test work with SHA-256
t3309: make test work with SHA-256
t3308: make test work with SHA-256
t3206: make hash size independent
...
Junio C Hamano [Mon, 17 Feb 2020 21:22:16 +0000 (13:22 -0800)]
Merge branch 'rs/name-rev-memsave'
Memory footprint and performance of "git name-rev" has been
improved.
* rs/name-rev-memsave:
name-rev: sort tip names before applying
name-rev: release unused name strings
name-rev: generate name strings only if they are better
name-rev: pre-size buffer in get_parent_name()
name-rev: factor out get_parent_name()
name-rev: put struct rev_name into commit slab
name-rev: don't _peek() in create_or_update_name()
name-rev: don't leak path copy in name_ref()
name-rev: respect const qualifier
name-rev: remove unused typedef
name-rev: rewrite create_or_update_name()
Pratyush Yadav [Mon, 17 Feb 2020 16:04:45 +0000 (21:34 +0530)]
git-gui: add missing close bracket
In d9c6469 (git-gui: update status bar to track operations, 2019-12-01),
the status bar was refactored to allow multiple overlapping operations.
Since the refactor changed the status bar interface, all callsites had
to be refactored to use the new interface. During that refactoring, this
closing bracket was missed. This leads to an error message popping up
when doing 'Branch->Reset...'.
Pratyush Yadav [Mon, 17 Feb 2020 15:44:24 +0000 (21:14 +0530)]
Merge branch 'cs/german-translation'
Update the German translation and extend glossary.
* cs/german-translation:
git-gui: update German translation
git-gui: extend translation glossary template with more terms
git-gui: update pot template and German translation to current source code
Update German translation (glossary and final translation) with
recent additions, but also switch several terms from uncommon
translations back to English vocabulary.
This most prominently concerns "commit" (noun, verb), "repository",
"branch", and some more. These uncommon translations have been introduced
long ago and never been changed since. In fact, the whole German
translation here hasn't been touched for a long time. However, in German
literature and magazines, git-gui is regularly noted for its uncommon
choice of translated vocabulary. This somewhat distracts from the actual
benefits of this tool. So it is probably better to abandon the uncommon
translations and rather stick to the common English vocabulary in git
version control.
Signed-off-by: Christian Stimming <christian@cstimming.de> Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
git-gui: extend translation glossary template with more terms
The English glossary template was missing some terms, some of them
not only for git-gui, but also gitk and/or git core. Many such terms
have been added.
Also, the list has been sorted alphabetically so that comparison to
other glossary lists are easier.
Signed-off-by: Christian Stimming <christian@cstimming.de> Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:41 +0000 (21:36 +0000)]
rebase: rename the two primary rebase backends
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:40 +0000 (21:36 +0000)]
rebase: change the default backend from "am" to "merge"
The am-backend drops information and thus limits what we can do:
* lack of full tree information from the original commits means we
cannot do directory rename detection and warn users that they might
want to move some of their new files that they placed in old
directories to prevent their becoming orphaned.[1]
* reduction in context from only having a few lines beyond those
changed means that when context lines are non-unique we can apply
patches incorrectly.[2]
* lack of access to original commits means that conflict marker
annotation has less information available.
* the am backend has safety problems with an ill-timed interrupt.
Also, the merge/interactive backend have far more abilities, appear to
currently have a slight performance advantage[3] and have room for more
optimizations than the am backend[4] (and work is underway to take
advantage of some of those possibilities).
Elijah Newren [Sat, 15 Feb 2020 21:36:38 +0000 (21:36 +0000)]
rebase tests: repeat some tests using the merge backend instead of am
In order to ensure the merge/interactive backend gets similar coverage
to the am one, add some tests for cases where previously only the am
backend was tested.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:37 +0000 (21:36 +0000)]
rebase tests: mark tests specific to the am-backend with --am
We have many rebase tests in the testsuite, and often the same test is
repeated multiple times just testing different backends. For those
tests that were specifically trying to test the am backend, add the --am
flag.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:36 +0000 (21:36 +0000)]
rebase: drop '-i' from the reflog for interactive-based rebases
A large variety of rebase types are supported by the interactive
machinery, not just the explicitly interactive ones. These all share
the same code and write the same reflog messages, but the "-i" moniker
in those messages doesn't really have much meaning. It also becomes
somewhat distracting once we switch the default from the am-backend to
the interactive one. Just remove the "-i" from these messages.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:35 +0000 (21:36 +0000)]
git-prompt: change the prompt for interactive-based rebases
In the past, we had different prompts for different types of rebases:
REBASE: for am-based rebases
REBASE-m: for merge-based rebases
REBASE-i: for interactive-based rebases
It's not clear why this distinction was necessary or helpful; when the
prompt was added in commit e75201963f67 ("Improve bash prompt to detect
various states like an unfinished merge", 2007-09-30), it simply added
these three different types. Perhaps there was a useful purpose back
then, but there have been some changes:
* The merge backend was deleted after being implemented on top of the
interactive backend, causing the prompt for merge-based rebases to
change from REBASE-m to REBASE-i.
* The interactive backend is used for multiple different types of
non-interactive rebases, so the "-i" part of the prompt doesn't
really mean what it used to.
* Rebase backends have gained more abilities and have a great deal of
overlap, sometimes making it hard to distinguish them.
* Behavioral differences between the backends have also been ironed
out.
* We want to change the default backend from am to interactive, which
means people would get "REBASE-i" by default if we didn't change
the prompt, and only if they specified --am or --whitespace or -C
would they get the "REBASE" prompt.
* In the future, we plan to have "--whitespace", "-C", and even "--am"
run the interactive backend once it can handle everything the
am-backend can.
For all these reasons, make the prompt for any type of rebase just be
"REBASE".
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:34 +0000 (21:36 +0000)]
rebase: add an --am option
Currently, this option doesn't do anything except error out if any
options requiring the interactive-backend are also passed. However,
when we make the default backend configurable later in this series, this
flag will provide a way to override the config setting.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:31 +0000 (21:36 +0000)]
rebase: allow more types of rebases to fast-forward
In the past, we dis-allowed rebases using the interactive backend from
performing a fast-forward to short-circuit the rebase operation. This
made sense for explicitly interactive rebases and some implicitly
interactive rebases, but certainly became overly stringent when the
merge backend was re-implemented via the interactive backend.
Just as the am-based rebase has always had to disable the fast-forward
based on a variety of conditions or flags (e.g. --signoff, --whitespace,
etc.), we need to do the same but now with a few more options. However,
continuing to use REBASE_FORCE for tracking this is problematic because
the interactive backend used it for a different purpose. (When
REBASE_FORCE wasn't set, the interactive backend would not fast-forward
the whole series but would fast-forward individual "pick" commits at the
beginning of the todo list, and then a squash or something would cause
it to start generating new commits.) So, introduce a new
allow_preemptive_ff flag contained within cmd_rebase() and use it to
track whether we are going to allow a pre-emptive fast-forward that
short-circuits the whole rebase.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:30 +0000 (21:36 +0000)]
t3432: make these tests work with either am or merge backends
t3432 had several stress tests for can_fast_forward(), whose intent was
to ensure we were using the optimization of just fast forwarding when
possible. However, these tests verified that fast forwards had happened
based on the output that rebase printed to the terminal. We can instead
test more directly that we actually fast-forwarded by checking the
reflog, which also has the side effect of making the tests applicable
for the merge/interactive backend.
This change does lose the distinction between "noop" and "noop-force",
but as stated in commit c9efc216830f ("t3432: test for --no-ff's
interaction with fast-forward", 2019-08-27) which introduced that
distinction: "These tests aren't supposed to endorse the status quo,
just test for what we're currently doing.".
This change does not actually run these tests with the merge/interactive
backend; instead this is just a preparatory commit. A subsequent commit
which fixes can_fast_forward() to work with that backend will then also
change t3432 to add tests of that backend as well.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:29 +0000 (21:36 +0000)]
rebase: fix handling of restrict_revision
restrict_revision in the original shell script was an excluded revision
range. It is also treated that way by the am-backend. In the
conversion from shell to C (see commit 6ab54d17be3f ("rebase -i:
implement the logic to initialize $revisions in C", 2018-08-28)), the
interactive-backend accidentally treated it as a positive revision
rather than a negated one.
This was missed as there were no tests in the testsuite that tested an
interactive rebase with fork-point behavior.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:27 +0000 (21:36 +0000)]
rebase, sequencer: remove the broken GIT_QUIET handling
The GIT_QUIET environment variable was used to signal the non-am
backends that the rebase should perform quietly. The preserve-merges
backend does not make use of the quiet flag anywhere (other than to
write out its state whenever it writes state), and this mechanism was
broken in the conversion from shell to C. Since this environment
variable was specifically designed for scripts and the only backend that
would still use it is no longer a script, just gut this code.
A subsequent commit will fix --quiet for the interactive/merge backend
in a different way.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:26 +0000 (21:36 +0000)]
t3406: simplify an already simple test
When the merge backend was re-implemented on top of the interactive
backend, the output of rebase --merge changed a little. This change
allowed this test to be simplified, though it wasn't noticed until now.
Simplify the testcase a little.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:25 +0000 (21:36 +0000)]
rebase (interactive-backend): fix handling of commits that become empty
As established in the previous commit and commit b00bf1c9a8dd
(git-rebase: make --allow-empty-message the default, 2018-06-27), the
behavior for rebase with different backends in various edge or corner
cases is often more happenstance than design. This commit addresses
another such corner case: commits which "become empty".
A careful reader may note that there are two types of commits which would
become empty due to a rebase:
* [clean cherry-pick] Commits which are clean cherry-picks of upstream
commits, as determined by `git log --cherry-mark ...`. Re-applying
these commits would result in an empty set of changes and a
duplicative commit message; i.e. these are commits that have
"already been applied" upstream.
* [become empty] Commits which are not empty to start, are not clean
cherry-picks of upstream commits, but which still become empty after
being rebased. This happens e.g. when a commit has changes which
are a strict subset of the changes in an upstream commit, or when
the changes of a commit can be found spread across or among several
upstream commits.
Clearly, in both cases the changes in the commit in question are found
upstream already, but the commit message may not be in the latter case.
When cherry-mark can determine a commit is already upstream, then
because of how cherry-mark works this means the upstream commit message
was about the *exact* same set of changes. Thus, the commit messages
can be assumed to be fully interchangeable (and are in fact likely to be
completely identical). As such, the clean cherry-pick case represents a
case when there is no information to be gained by keeping the extra
commit around. All rebase types have always dropped these commits, and
no one to my knowledge has ever requested that we do otherwise.
For many of the become empty cases (and likely even most), we will also
be able to drop the commit without loss of information -- but this isn't
quite always the case. Since these commits represent cases that were
not clean cherry-picks, there is no upstream commit message explaining
the same set of changes. Projects with good commit message hygiene will
likely have the explanation from our commit message contained within or
spread among the relevant upstream commits, but not all projects run
that way. As such, the commit message of the commit being rebased may
have reasoning that suggests additional changes that should be made to
adapt to the new base, or it may have information that someone wants to
add as a note to another commit, or perhaps someone even wants to create
an empty commit with the commit message as-is.
Junio commented on the "become-empty" types of commits as follows[1]:
WRT a change that ends up being empty (as opposed to a change that
is empty from the beginning), I'd think that the current behaviour
is desireable one. "am" based rebase is solely to transplant an
existing history and want to stop much less than "interactive" one
whose purpose is to polish a series before making it publishable,
and asking for confirmation ("this has become empty--do you want to
drop it?") is more appropriate from the workflow point of view.
I would simply add that his arguments for "am"-based rebases actually
apply to all non-explicitly-interactive rebases. Also, since we are
stating that different cases should have different defaults, it may be
worth providing a flag to allow users to select which behavior they want
for these commits.
Introduce a new command line flag for selecting the desired behavior:
--empty={drop,keep,ask}
with the definitions:
drop: drop commits which become empty
keep: keep commits which become empty
ask: provide the user a chance to interact and pick what to do with
commits which become empty on a case-by-case basis
In line with Junio's suggestion, if the --empty flag is not specified,
pick defaults as follows:
explicitly interactive: ask
otherwise: drop
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Feb 2020 21:36:24 +0000 (21:36 +0000)]
rebase (interactive-backend): make --keep-empty the default
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d38 ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emily Shaffer [Sat, 15 Feb 2020 01:00:13 +0000 (17:00 -0800)]
prefix_path: show gitdir when arg is outside repo
When developing a script, it can be painful to understand why Git thinks
something is outside the current repo, if the current repo isn't what
the user thinks it is. Since this can be tricky to diagnose, especially
in cases like submodules or nested worktrees, let's give the user a hint
about which repository is offended about that path.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Acked-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 14 Feb 2020 18:54:59 +0000 (13:54 -0500)]
doc: move credential helper info into gitcredentials(7)
The details of how credential helpers can be called or implemented were
originally covered in Documentation/technical/. Those are topics that
end users might care about (and we even referenced them in the
credentials manpage), but those docs typically don't ship as part of the
end user documentation, making them less useful.
This situation got slightly worse recently in f3b9055624 (credential:
move doc to credential.h, 2019-11-17), where we moved them into the C
header file, making them even harder to find.
So let's move put this information into the gitcredentials(7)
documentation, which is meant to describe the overall concepts of our
credential handling. This was already pointing to the API docs for these
concepts, so we can just include it inline instead.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 14 Feb 2020 20:54:24 +0000 (12:54 -0800)]
Merge branch 'tb/commit-graph-object-dir'
The code to compute the commit-graph has been taught to use a more
robust way to tell if two object directories refer to the same
thing.
* tb/commit-graph-object-dir:
commit-graph.h: use odb in 'load_commit_graph_one_fd_st'
commit-graph.c: remove path normalization, comparison
commit-graph.h: store object directory in 'struct commit_graph'
commit-graph.h: store an odb in 'struct write_commit_graph_context'
t5318: don't pass non-object directory to '--object-dir'
projects / thirdparty / git.git / log
