netfilter: nft_set_rbtree: get command skips end element with open interval
The get command on intervals provide partial matches such as subranges
for usability reasons. However, an open interval has no closing end
element. If the closing element matches within the range of the open
internal, ie. its closest match is the start element of the open range,
then, return 0 but offer no matching element to userspace through
netlink as a special case. Userspace provides at least a matching start
element in this case and the closing end element matching the open
interal is ignored.
Another possibility is to report the matching start element of the open
interval for this end interval. However, this results in duplicated
matching being listed in userspace because userspace does not expect a
start element as response to a end element.
Fixes: 2aa34191f06f ("netfilter: nft_set_rbtree: use binary search array in get command") Reported-by: Melbin K Mathew <mlbnkm1@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers.
netfilter: nfnetlink_cthelper: cap to maximum number of expectation per master on updates
Really cap it to NF_CT_EXPECT_MAX_CNT (255) on updates.
The commit ("netfilter: nfnetlink_cthelper: cap to maximum number of
expectation per master") only covers creation of helpers, not updates.
Fixes: 397c8300972f ("netfilter: nf_conntrack_helper: cap maximum number of expectation at helper registration") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
Feng Wu [Thu, 25 Jun 2026 08:44:25 +0000 (08:44 +0000)]
netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt()
On links faster than ~34 Gbps, where byte rate may exceed 2^32-1
(~ 4.3 GBps), the comparison result becomes incorrect because the
truncated value no longer reflects the actual estimator rate.
Wyatt Feng [Sun, 28 Jun 2026 08:05:54 +0000 (16:05 +0800)]
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path.
If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the
old data buffer is freed. However, nf_nat_sip() fails to update *dptr to
point to the new buffer.
It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP
packet, which would overwrite the sequence number with a checksum update.
------------------------------------------------------------------------
nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen.
But clones are possible, so rebuild dptr.
Disable nf_nat_mangle_udp_packet() branch for TCP streams.
It doesn't look like this can ever happen, else we should have received
bug reports about this, so just check the conntrack is UDP and drop
otherwise.
The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages,
so I don't think this is ever expected to be true for a TCP stream.
Fixes: 7266507d8999 ("netfilter: nf_ct_sip: support Cisco 7941/7945 IP phones") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-sonnet-4-6 Signed-off-by: Florian Westphal <fw@strlen.de>
Alice Ryhl [Fri, 3 Jul 2026 11:25:12 +0000 (11:25 +0000)]
rust_binder: clear freeze listener on node removal
Generally userspace is supposed to explicitly clear freeze listeners
before they drop the refcount on the node ref to zero, but there's
nothing forcing that. Currently, in this scenario the freeze listener
remains in the freeze_listeners rbtree and in the remote node's freeze
listener list, even though the ref for which the listener is registered
is gone. This could potentially lead to a memory leak due to a refcount
cycle. Thus, remove the freeze listener in this scenario.
Rust binder resolved handle 0 to the context manager node, but it does not
reject the case where the caller owns the same node.
The C binder driver rejects transactions from the context-manager process
to handle 0 after resolving the target node. Match that behavior in Rust
Binder by rejecting handle 0 transactions when the resolved context-manager
node is owned by the calling process.
This applies to both synchronous and oneway transactions because both paths
resolve the target through Process::get_transaction_node().
Hyunwoo Kim [Sun, 31 May 2026 13:29:24 +0000 (22:29 +0900)]
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow!
Cc: stable <stable@kernel.org> Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Acked-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/ahw3tFhLz9bMMJAO@v4bel Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carlos Llamas [Fri, 19 Jun 2026 18:52:31 +0000 (18:52 +0000)]
binder: fix UAF in binder_free_transaction()
In binder_free_transaction(), the t->to_proc is read under the t->lock.
However, once the t->lock is dropped, the to_proc can die in parallel.
This leads to a use-after-free error when we attempt to acquire its
inner lock right afterwards:
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0
Write of size 4 at addr ffff00001125da70 by task B/672
To prevent this, pin the target thread (t->to_thread) to guarantee the
target process remains alive. Undelivered transactions without a target
thread are already safe, as the target process can only be the current
context in those paths.
Cc: stable <stable@kernel.org> Reported-by: Alice Ryhl <aliceryhl@google.com> Closes: https://lore.kernel.org/all/aikJKVuny_eOivwN@google.com/ Fixes: a370003cc301 ("binder: fix possible UAF when freeing buffer") Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20260619185233.2194678-2-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carlos Llamas [Fri, 19 Jun 2026 18:52:30 +0000 (18:52 +0000)]
binder: fix UAF in binder_thread_release()
When a thread exits, binder_thread_release() walks its transaction stack
to clear the t->from and t->to_proc that correspond with the exiting
thread. However, a process dying in parallel might attempt to kfree some
of these transactions. And if one of them has no associated t->to_proc,
the t->to_proc->inner_lock will not be acquired.
This means that transaction accesses in binder_thread_release() after
t->to_proc has been cleared might race with binder_free_transaction()
and cause a use-after-free error as reported by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798
Write of size 8 at addr ffff000016627500 by task X/715
Allocated by task 717 on cpu 18 at 67.267803s:
__kasan_kmalloc+0xa0/0xbc
__kmalloc_cache_noprof+0x174/0x444
binder_transaction+0x554/0x8150
binder_thread_write+0xa30/0x4354
binder_ioctl+0x20f0/0x299c
[...]
Freed by task 202 on cpu 18 at 90.416221s:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_free_transaction+0x150/0x294
binder_send_failed_reply+0x398/0x6d8
binder_release_work+0x3e4/0x4ec
binder_deferred_func+0xbd8/0x104c
[...]
==================================================================
In order to avoid this, make sure that binder_free_transaction() reads
the t->to_proc under the transaction lock. This will serialize the
transaction release with the accesses in binder_thread_release(). Plus,
it matches the documented locking rules for @to_proc.
Cc: stable <stable@kernel.org> Fixes: 7a4408c6bd3e ("binder: make sure accesses to proc/thread are safe") Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://patch.msgid.link/20260619185233.2194678-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keshav Verma [Mon, 15 Jun 2026 21:17:43 +0000 (02:47 +0530)]
rust_binder: synchronize Rust Binder stats with freeze commands
Rust Binder stats use BC_COUNT and BR_COUNT to size the command and
return counters, and use event string tables when printing debug
statistics.
The Binder protocol includes freeze-related commands and return codes,
but the Rust Binder statistics code was not updated to cover them. As a
result, those commands and return codes are not accounted for or printed
by the stats debug output.
Update the counts and event string tables so these commands and return
codes are included in the debug statistics output.
Chris Mason [Wed, 3 Jun 2026 17:44:54 +0000 (10:44 -0700)]
binder: cache secctx size before release zeroes it
binder_transaction() bounds the scatter-gather buffer area with
sg_buf_end_offset and subtracts the aligned LSM context size because
the secctx is written at the tail of that area. The subtraction reads
lsmctx.len, but that field has already been cleared by the time the
line runs:
security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len
reads back as 0 and the subtraction contributes nothing, leaving
sg_buf_end_offset too large by the aligned secctx size on every
transaction to a txn_security_ctx node.
Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset -
sg_buf_offset as the sole upper bound on its copy, so the inflated end
offset lets the copy run into the bytes that already hold the secctx.
The aligned size must therefore be cached before release rather than
re-read from the now-cleared field. Fix by caching it in
lsmctx_aligned_size at function scope when it is first computed and
subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after
release. Reuse the same value for the earlier buf_offset computation.
Fixes: 6fba89813ccf ("lsm: ensure the correct LSM context releaser") Cc: stable <stable@kernel.org> Assisted-by: kres:claude-opus-4-8 Signed-off-by: Chris Mason <clm@meta.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Carlos Llamas <cmllamas@google.com> Link: https://patch.msgid.link/20260603174506.1957278-1-clm@meta.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Thu, 2 Jul 2026 08:23:02 +0000 (09:23 +0100)]
netfs: Fix barriering when walking subrequest list
Fix the barriering used when walking the subrequest list in retry as
there's a possibility of seeing a subreq that's just been added by the
application thread.
Merge tag 'usb-serial-7.2-rc2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial fixes for 7.2-rc2
Here is a fix for an information leak in the keyspan_pda driver and
three fixes for digi_acceleport addressing stuck rx if a port is closed
while throttled, a hard lockup on disconnect and write buffer
corruption.
Included are also some new modem device ids.
All have been in linux-next for a few days with no reported issues.
* tag 'usb-serial-7.2-rc2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: keyspan_pda: fix information leak
USB: serial: option: add Telit Cinterion FE990D50 compositions
USB: serial: digi_acceleport: fix broken rx after throttle
USB: serial: digi_acceleport: fix hard lockup on disconnect
USB: serial: digi_acceleport: fix write buffer corruption
GUE private flags can indicate that remote checksum offload metadata is
present. The private flags field itself is accounted for by
guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even
when GUE_PFLAG_REMCSUM is set.
This lets a packet with only the private flags field pass
validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum()
read the missing REMCSUM start/offset fields from the following bytes.
Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that
malformed packets are rejected during option validation.
Fixes: c1aa8347e73e ("gue: Protocol constants for remote checksum offload") Signed-off-by: Qihang <q.h.hack.winter@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'asoc-fix-v7.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
A fairly standard set of driver specific fixes and quirks that have come
in since the merge window, plus a MAINTAINERS update. The tas675x
READ_ONCE change is probably not actually fixing issues properly but we
need a whole new approach to concurrency there and it came along with
some good fixes.
The result of this mixture of different and unrelated subsystem
details is that even when touching an obscure device id struct most of
the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per
subsystem headers and only including what is really needed reduces the
amount of needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers.
There are still a few instances left, but the ones with high impact
(that is in headers that are used a lot) and the easy ones (.c files)
are handled. These remaining includes will be addressed during the
next merge window"
* tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (headers)
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
media: em28xx: Add include for struct usb_device_id
LoongArch: KVM: Add include defining struct cpu_feature
ALSA: hda/core: Add include defining struct hda_device_id
usb: dwc2: Add include defining struct pci_device_id
platform/x86: int3472: Add include defining struct dmi_system_id
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
i2c: Let i2c-core.h include <linux/i2c.h>
of: Explicitly include <linux/types.h> and <linux/err.h>
platform/x86: msi-ec: Ensure dmi_system_id is defined
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
driver core: platform: Include header for struct platform_device_id
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
media: ti: vpe: #include <linux/platform_device.h> explicitly
mod_devicetable.h: Split into per subsystem headers
Dawei Feng [Tue, 30 Jun 2026 07:16:25 +0000 (15:16 +0800)]
octeontx2-pf: fix SQB pointer leak on init failure
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
OcteonTX2 PF device and the corresponding AF mailbox setup to test with,
no runtime testing was able to be performed.
Xiang Mei [Tue, 30 Jun 2026 04:51:21 +0000 (21:51 -0700)]
net: usb: net1080: validate packet_len before pad-byte access in rx_fixup
For an even packet_len, net1080_rx_fixup() reads the pad byte at
skb->data[packet_len] before the skb->len != packet_len check further
down, and packet_len is only bounded against NC_MAX_PACKET. A malicious
NetChip 1080 device can send a short frame advertising a large even
packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the
skb:
BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup
Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14
...
net1080_rx_fixup (drivers/net/usb/net1080.c:384)
usbnet_bh (drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3708)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
...
Reject the frame when packet_len >= skb->len before reading.
Fixes: 904813cd8a0b ("[PATCH] USB: usbnet (4/9) module for net1080 cables") Reported-by: Weiming Shi <bestswngs@gmail.com> Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei <xmei5@asu.edu> Link: https://patch.msgid.link/20260630045121.1565324-1-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dmitry Torokhov [Tue, 30 Jun 2026 01:44:41 +0000 (18:44 -0700)]
Input: maple_keyb - set driver data before registering input device
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Dmitry Torokhov [Tue, 30 Jun 2026 05:49:15 +0000 (22:49 -0700)]
Input: maplecontrol - set driver data before registering input device
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Dmitry Torokhov [Tue, 30 Jun 2026 05:47:34 +0000 (22:47 -0700)]
Input: maplemouse - set driver data before registering input device
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
Currently <linux/compiler.h> isn't included at all (not even
transitively) in <asm/ptrace.h>.
arch/parisc/kernel/asm-offsets.c just happens to include the following
chain of includes before <asm/ptrace.h>:
. That chain will be broken, because in one of the next commits
<asm/hardware.h> is changed to only include <linux/device-id/parisc.h>
instead of <linux/mod_devicetable.h>. So to ensure
arch/parisc/kernel/asm-offsets.c knows about unlikely() even after that
change, #include <linux/compiler.h> explicitly.
media: em28xx: Add include for struct usb_device_id
Traditionally <linux/mod_devicetable.h> was a header defining a plethora
of structs, among them struct usb_device_id. This was split now with the
objective that only the relevant bits are included.
Currently <linux/mod_devicetable.h> is transitively included in
drivers/media/usb/em28xx/em28xx.h via:
To keep struct usb_device_id available once <linux/device/driver.h>
stops including <linux/mod_devicetable.h>, include it the header
providing that struct explictly.
LoongArch: KVM: Add include defining struct cpu_feature
Traditionally <linux/mod_devicetable.h> was a header defining a plethora
of structs, among them struct cpu_features. This was split now with the
objective that only the relevant bits are included.
Currently <linux/mod_devicetable.h> is transitively included in
arch/loongarch/kvm/main.c via:
ALSA: hda/core: Add include defining struct hda_device_id
Traditionally all *_device_id were defined in a single header
<linux/mod_devicetable.h>. This was split now with the objective that
only the relevant bits are included. So including <linux/pci.h> won't be
enough to get a definition of (the unrelated to pci) struct
hda_device_id.
Add an explicit include for the header defining struct hda_device_id to
keep working when <linux/pci.h> stops providing this defintion.
usb: dwc2: Add include defining struct pci_device_id
Up to now <linux/acpi.h> includes <linux/mod_devicetable.h> that
provides struct pci_device_id. However <linux/mod_devicetable.h> was
split into per bus headers and <linux/acpi.h> will only include the acpi
related one (and similar for other bus headers).
As struct pci_device_id is used in drivers/usb/dwc2/core.h, add an
include to ensure it's defined also after the includes in <linux/acpi.h>
are tightened.
However these includes will be tightend such that only the bits relevant
for of will be provided by <linux/of.h>. To ensure that dmi_system_id
stays around, include the respective header explicitly.
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
Currently <linux/i2c.h> includes <linux/mod_devicetable.h> transitively
which ensures that struct dmi_system_id is defined in
drivers/platform/x86/x86-android-tablets/x86-android-tablets.h. However
this include in <linux/i2c.h> will be replaced by one for i2c_device_id
only. To ensure that dmi_system_id is available add the include for that
explicitly.
The subsystem private header i2c-core.h uses several symbols defined in
<linux/i2c.h>, e.g. struct i2c_board_info and i2c_lock_bus()). This
doesn't pose a problem in practise because all files including
"i2c-core.h" also include <linux/i2c.h>.
To make this more robust add an include statement for <linux/i2c.h>
making the header self-contained.
of: Explicitly include <linux/types.h> and <linux/err.h>
<linux/of_platform.h> uses resource_size_t and relies on the transitive
include <linux/mod_devicetable.h> -> <linux/types.h>. It also uses error
constants and thus relying on the include chain
<linux/mod_devicetable.h> -> <linux/uuid.h> -> <linux/string.h> ->
<linux/err.h>.
With the plan to split <linux/mod_devicetable.h> per subsystem and then
only letting of_platform.h include the of-specific bits (which don't
require these two headers), add the needed includes explicitly to keep
the header self-contained.
platform/x86: msi-ec: Ensure dmi_system_id is defined
Currently <linux/acpi.h> includes <linux/mod_devicetable.h> and thus
dmi_system_id is available for the driver. To disentangle includes
<linux/acpi.h> will be changed to only include the header for
acpi_device_id instead of the full <linux/mod_devicetable.h>. To prepare
for that include the dedicated header for struct dmi_device_id.
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
All consumers of the latter also include the former, but without that
struct usb_driver and struct usb_device_id (and maybe more) are not
defined. Add an include for <linux/usb.h> to make the header
self-contained.
driver core: platform: Include header for struct platform_device_id
Platform drivers can define an array containing the supported device
variants to be assigned to the struct platform_driver's .id_table.
While a forward declaration of struct platform_device_id is technically
enough to make the driver self-contained, it's reasonable to provide the
(very lightweight) data type definition for that array in
<linux/platform_device.h> to not add that burden to all platform drivers
with an id-table.
Note that currently <linux/device.h> transitively includes
<linux/mod_devicetable.h> that provides struct platform_device_id. But
that include is planned to be replaced by a tighter set of includes that
only define the structures relevant for the stuff in <linux/device.h>.
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
struct device_driver contains pointers of type struct of_device_id* and
struct acpi_device_id* but doesn't ensure these are defined. To make the
header self-contained add the (very lightweight) includes that contain
the respective definitions.
The result is that even when touching an obscure device id struct most
of the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per subsystem
headers and only including what is really needed reduces the amount of
needed recompilation.
Implement the first step and define each device id struct in a separate
header (together with its associated #defines).
<linux/mod_devicetable.h> is modified to include all the new headers to
continue to provide the same symbols.
Several headers currently include <linux/mod_devicetable.h>, those that
are most lukrative to include only their subsystem headers only are:
ata: libata-scsi: limit simulated SCSI command copy to response length
The function ata_scsi_rbuf_fill() is used to copy the response of
emulated SCSI commands from ata_scsi_rbuf to the SCSI command's
scatterlist.
Currently, sg_copy_from_buffer() is called with the size argument
set to ATA_SCSI_RBUF_SIZE (2048 bytes). Since ata_scsi_rbuf is
zeroed out before the simulation actor is invoked, copying the
full buffer size causes the remainder of the SCSI command's
transfer buffer (beyond the actual response length 'len') to be
overwritten with zeroes. This clobbers any pre-existing sentinel
values or data in the caller's buffer tail, even though the
correct residual count is reported via scsi_set_resid().
Fix this by passing the actual response length 'len' as the copy
size to sg_copy_from_buffer(), ensuring that the tail of the
caller's buffer remains untouched. Also, add a defensive check
to ensure that the actor does not return a length exceeding the
static buffer capacity. If this occurs, trigger a WARN_ON(),
fail the command with an aborted command error, and return
immediately without copying any data.
The fix was tested by invoking an SCSI SG_IO INQUIRY on
an ATA disk on vanilla build, and build with the fix. Confirmed
that the input buffer's tail end remains unmodified with the fix.
Fixes: 5251ae224d8d ("ata: libata-scsi: Return residual for emulated SCSI commands") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Karuna Ramkumar <rkaruna@google.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Wentao Liang [Thu, 25 Jun 2026 14:18:37 +0000 (22:18 +0800)]
ata: pata_pxa: Fix DMA channel leak on probe error
When dmaengine_slave_config() fails, the DMA channel acquired by
dma_request_chan() is not released before returning the error,
leaking the channel reference.
Fix by adding dma_release_channel() in the error path.
The ata_host_activate() error path already correctly releases the
DMA channel.
Myeonghun Pak [Fri, 26 Jun 2026 08:58:37 +0000 (17:58 +0900)]
ata: sata_gemini: unwind clocks on IDE pinctrl errors
gemini_sata_bridge_init() prepares and enables both SATA PCLKs, then
disables them again while keeping the clocks prepared for later bridge
start and stop operations. If gemini_setup_ide_pins() fails after that,
gemini_sata_probe() returns directly and skips the existing
out_unprep_clk unwind path.
Route the IDE pinctrl failure through out_unprep_clk so the clocks
prepared by gemini_sata_bridge_init() are unprepared before probe
fails.
Fixes: d872ced29d5f ("ata: sata_gemini: Introduce explicit IDE pin control") Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Bryam Vargas [Tue, 23 Jun 2026 03:23:45 +0000 (22:23 -0500)]
ata: libata-core: Reject an invalid concurrent positioning ranges count
ata_dev_config_cpr() takes the number of range descriptors from buf[0]
of the concurrent positioning ranges log (up to 255), which the device
reports independently of the log size in the GPL directory. The count is
then walked at a fixed 32-byte stride in two places with no bound: the
log read here, and the INQUIRY VPD page B9h emitter, which writes one
descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device
reporting a count larger than its own log overflows the read buffer (up
to 7704 bytes past a 512-byte slab), and a count above 62 overflows the
response buffer on the emit side.
Bound the count once, on probe, against both the log the device returned
and the number of descriptors the VPD B9h response buffer can hold
(ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range
count with a warning; this keeps the emitter in bounds with no separate
change there.
Suggested-by: Damien Le Moal <dlemoal@kernel.org> Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Fixes: c745dfc541e7 ("libata: fix reading concurrent positioning ranges log") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Bryam Vargas [Sat, 20 Jun 2026 02:54:02 +0000 (21:54 -0500)]
ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD
The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus
after entering Device-Initiated Slumber during idle. With the default
med_power_with_dipm policy the link goes down (SStatus 1 SControl 300)
and does not recover, forcing the filesystem read-only. Forcing
max_performance keeps the link stable across prolonged idle.
Add a NOLPM quirk so link power management is disabled for this drive
specifically, leaving it intact for other devices on the host.
Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Initialize task local storage before fork bails out to free the task
(Jann Horn)
- Fix insn_aux_data leak on verifier error path (KaFai Wan)
- Reject BPF inode storage map creation when BPF LSM is uninitialized
(Matt Bobrowski)
- Mask pseudo pointer values in verifier logs when pointer leaks are
not allowed (Nuoqi Gui)
- Harden BPF JIT against spraying via IBPB flush (Pawan Gupta)
- Reject a skb-modifying SK_SKB stream parser since the latter is only
meant to measure the next message (Sechang Lim)
- Fix bpf_refcount_acquire to reject refcounted allocation arguments
with a non-zero fixed offset (Yiyang Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Prefer dirty packs for eBPF allocations
bpf: Prefer packs that won't trigger an IBPB flush on allocation
bpf: Skip redundant IBPB in pack allocator
bpf: Restrict JIT predictor flush to cBPF
x86/bugs: Enable IBPB flush on BPF JIT allocation
bpf: Support for hardening against JIT spraying
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
bpf,fork: wipe ->bpf_storage before bailouts that access it
bpf: Fix insn_aux_data leak on verifier err_free_env path
selftests/bpf: Cover pseudo-BTF ksym log masking
bpf: Mask pseudo pointer values in verifier logs
selftests/bpf: Cover refcount acquire node offsets
bpf: Reject offset refcount acquire arguments
selftests/bpf: test rejection of a packet-modifying SK_SKB stream parser
bpf, sockmap: reject a packet-modifying SK_SKB stream parser
selftests/bpf: don't modify the skb in the strparser parser prog
Merge tag 'vfio-v7.2-rc2' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
"Mostly straightforward fixes here, inconsistent runtime PM handling
due to global device policies, bitfield races, unwind path gaps,
teardown ordering, and a misplaced library flag.
- Fix racy bitfield updates in vfio-pci-core and the mlx5 vfio-pci
variant driver with a binary split between setup/release and
runtime modified flags. These were noted across several Sashiko
reviews as pre-existing issues (Alex Williamson)
- Fix runtime PM inconsistency where the vfio-pci driver module_init
could modify the idle PM policy of existing devices through globals
managed in vfio-pci-core, leading to unbalanced runtime PM
operations (Alex Williamson)
- Restore mutability of writable vfio-pci module options by further
pulling policy globals out of vfio-pci-core, to instead be latched
per device at device init. Provide visibility of the per device
latched values through debugfs (Alex Williamson)
- Reorder device debugfs removal before device_del() to avoid gap
where debugfs is available with stale devres pointers (Alex
Williamson)
- Move UUID library linking flag from vfio selftest Makefile into
libvfio.mk to avoid exposing such dependencies when linking with
KVM selftests (Sean Christopherson)"
* tag 'vfio-v7.2-rc2' of https://github.com/awilliam/linux-vfio:
vfio: selftests: Add luuid to libvfio.mk's list of libraries, not to the Makefile
vfio/pci: Expose latched module parameter policy in debugfs
vfio: Remove device debugfs before releasing devres
vfio/pci: Latch all module parameters per device
vfio/mlx5: Fix racy bitfields and tighten struct layout
vfio/pci: Fix racy bitfields and tighten struct layout
vfio/pci: Release the VGA arbiter client on register_device() failure
vfio/pci: Latch disable_idle_d3 per device
Dave Airlie [Thu, 2 Jul 2026 22:53:09 +0000 (08:53 +1000)]
Merge tag 'drm-misc-fixes-2026-07-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.2-rc2:
- Fix potential null pointer dereference in dma-buf.
- Handle 0 in dma_fence_dedup_array.
- Use the correct callback in dma_fence_timeline_name.
- Fix device removal handling in amdxdna.
- kernel-doc fixes.
- Include header fix for drm_ras.h
- Handle edids better in virtio.
- Use the clk_bulk api for error handling in malidp.
- More clk handling fixes for komeda.
- panthor scheduler block fallout fixes.
- panthor unplug fixes.
- other panthor fixes.
- Fix unnecessary WARN_ON in topology probe after teardown.
- Add refcount to amdxdna job to fix use-after free.
- Fix increasing args->size in ioctl's of drm/imagination.
- Handle stride correctly in pvr_set_uobj_array.
- Only call imagination's drm_sched_entity_fini once.
Dave Airlie [Thu, 2 Jul 2026 22:43:58 +0000 (08:43 +1000)]
Merge tag 'drm-xe-fixes-2026-07-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Wedge from the timeout handler only after releasing the queue (Rodrigo)
- Fix a NULL pointer dereference (Francois)
- Remove redundant exec_queue_suspended (Lu)
- RTP / OA whitelist fixes (Ashutosh, Gustavo, Thomas)
- Return error on non-migratable faults requiring devmem (Matt Brost)
- Skip FORCE_WC and vm_bound check for external dma-bufs (Matt Auld)
- Hold notifier lock for write on inject test path (Shuicheng)
- Drop bogus static from finish in force_invalidate (Shuicheng)
- Fix double-free of managed BO in error path (Shuicheng)
- Don't attempt to process FAST_REQ or EVENT relays (Michal)
- Fix NPD in bo_meminfo (Matthew Auld)
- Prevent invalid cursor access for purged BOs (Matthew Auld)
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG (Ashutosh)
Gaole Zhang [Tue, 9 Jun 2026 09:06:09 +0000 (17:06 +0800)]
wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin
In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set
unconditionally even when ath11k_core_qmi_firmware_ready() fails.
This leaves the driver in an inconsistent state where
initialization is considered complete although the firmware ready
handling did not finish successfully. During the subsequent SSR,
the driver enters the restart path based on this incorrect state
and dereferences uninitialized srng members, resulting in a NULL
pointer dereference.
Fix this by:
- skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set
- setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds
- setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling
on error
Daniel Hodges [Fri, 6 Feb 2026 18:52:07 +0000 (13:52 -0500)]
wifi: ath6kl: fix use-after-free in aggr_reset_state()
The aggr_reset_state() function uses timer_delete() (non-synchronous)
for the aggregation timer before proceeding to delete TID state and
before the structure is freed by callers like aggr_module_destroy().
If the timer callback (aggr_timeout) is executing when aggr_reset_state()
is called, the callback will continue to access aggr_conn fields like
rx_tid[] and stat[] which may be freed immediately after by
kfree(aggr_info->aggr_conn) in aggr_module_destroy().
Additionally, the timer callback can re-arm itself via mod_timer() while
aggr_reset_state() is running, creating a more complex race condition.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
Fixes: bdcd81707973 ("Add ath6kl cleaned up driver") Cc: stable@vger.kernel.org Signed-off-by: Daniel Hodges <git@danielhodges.dev> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20260206185207.30098-1-git@danielhodges.dev Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Cheng Yongkang [Fri, 5 Jun 2026 15:32:10 +0000 (08:32 -0700)]
wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request
ath9k_hif_request_firmware() re-arms an asynchronous firmware load via
request_firmware_nowait(), passing hif_dev as the completion context, and
then still dereferences hif_dev:
The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events"
workqueue and, when the firmware is missing, walks the retry chain into
ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That
releases the wait_for_completion(&hif_dev->fw_done) in a concurrent
ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing
dev_info() in the frame that re-armed the request can therefore read freed
memory (hif_dev->udev, the first field of struct hif_device_usb):
BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware
Read of size 8 ... by task kworker/...
ath9k_hif_request_firmware
ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247
request_firmware_work_func
Allocated by ...:
ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c
Freed by ...:
ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c
The fw_done barrier only makes disconnect wait for the firmware chain to
*terminate*; it does not protect the outer ath9k_hif_request_firmware()
frame that re-armed the request and keeps touching hif_dev afterwards.
Drop the post-request dev_info(): it is the only use of hif_dev after the
async request is armed, and it is purely informational (the dev_err() on the
failure path runs only when request_firmware_nowait() did not arm a callback,
so hif_dev is still alive there).
This was first reported by syzbot as a single, non-reproduced crash that was
later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer,
which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc
device whose firmware download fails). The vulnerable code is unchanged and
still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN
once the (sub-microsecond) race window is widened.
Fixes: e904cf6fe230 ("ath9k_htc: introduce support for different fw versions") Reported-by: syzbot+50122cbc2874b1eb25b0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=50122cbc2874b1eb25b0 Signed-off-by: Cheng Yongkang <teel4res@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20260605153210.20471-1-1020691186@qq.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Yang Xiuwei [Thu, 2 Jul 2026 08:29:37 +0000 (16:29 +0800)]
io_uring/uring_cmd: fix uring_cmd.c comments
Fix "concelable" -> "cancelable" in the comment above
io_uring_cmd_mark_cancelable(), and fix the memory ordering comment
in __io_uring_cmd_done() to reference io_do_iopoll() and
->iopoll_completed.
futex/requeue: Revert "Prevent NULL pointer dereference in remove_waiter() on self-deadlock""
The commit cited below should not have been merged. It attemted to fix an
existing problem ansd thereby introduced new problems by keeping the
pi_state in state Q_REQUEUE_PI_IN_PROGRESS and leaking it.
Based on the commit description the intention was to handle the case
when task_blocks_on_rt_mutex() returns -EDEADLK and the following
remove_waiter() dereferences the NULL pointer in waiter->task.
That is already handled by Davidlohr in commit 40a25d59e85b3
("locking/rtmutex: Skip remove_waiter() when waiter is not enqueued") and
requires no further acting.
Revert the commit breaking the "waiter == owner" case again.
Fixes: 74e144274af39 ("futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock") Reported-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260701131150.0Ijhq4Dw@linutronix.de Closes: https://lore.kernel.org/all/20260629020049.2082397-1-michael.bommarito@gmail.com
Sven Eckelmann [Thu, 2 Jul 2026 18:45:24 +0000 (20:45 +0200)]
batman-adv: fix VLAN priority offset
The batadv_skb_set_priority() receives an SKB with the inner ethernet
header at position "offset". When it tries to extract the IPv4 and IPv6
header, it needs to skip the ethernet header to get access to the IP
header.
But for VLAN header, it performs the access with the struct vlan_ethhdr.
This struct contains both both the ethernet header and the VLAN header. It
is therefore incorrect to skip over the whole vlan_ethhdr size to get
access to the vlan_ethhdr.
Cc: stable@vger.kernel.org Fixes: c54f38c9aa22 ("batman-adv: set skb priority according to content") Signed-off-by: Sven Eckelmann <sven@narfation.org>
John Madieu [Tue, 30 Jun 2026 17:53:29 +0000 (17:53 +0000)]
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
scu_supply is enabled alongside scu and scu_x2 during normal SRC
operation, but rsnd_src_suspend() and rsnd_src_resume() only disable
and re-enable scu and scu_x2. The supply clock is left enabled across
a system suspend and its prepare/enable refcount becomes unbalanced
after a suspend/resume cycle.
Disable scu_supply in rsnd_src_suspend() and re-enable it in
rsnd_src_resume() so the SRC clocks are managed consistently across
system PM transitions.
Fixes: ef19ecf042b4 ("ASoC: rsnd: Add system suspend/resume support") Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20260630175329.4145703-1-john.madieu.xa@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
Ruoyu Wang [Tue, 30 Jun 2026 06:00:40 +0000 (14:00 +0800)]
RDMA/siw: publish QP after initialization
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list.
Fixes: f29dd55b0236 ("rdma/siw: queue pair methods") Link: https://patch.msgid.link/r/20260630060040.966461-1-ruoyuw560@gmail.com Suggested-by: Bernard Metzler <bernard.metzler@linux.dev> Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com> Acked-by: Bernard Metzler <bernard.metzler@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Wentao Liang [Thu, 25 Jun 2026 11:32:39 +0000 (19:32 +0800)]
accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap()
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put.
RDMA/hns: Fix potential integer overflow in mhop hem cleanup
In hns_roce_cleanup_mhop_hem_table(), the expression:
obj = i * buf_chunk_size / table->obj_size;
is evaluated using 32-bit unsigned arithmetic because
'buf_chunk_size' is u32 and the usual arithmetic conversions convert
'i' to unsigned int. The result is assigned to a u64 variable, but the
multiplication may overflow before the assignment.
For sufficiently large HEM tables, this produces an incorrect object
index passed to hns_roce_table_mhop_put().
Cast 'i' to u64 before the multiplication so that the intermediate
calculation is performed with 64-bit arithmetic.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a25d13cbe816 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08") Link: https://patch.msgid.link/r/20260627095951.51378-1-listdansp@mail.ru Signed-off-by: Danila Chernetsov <listdansp@mail.ru> Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Ruoyu Wang [Thu, 18 Jun 2026 04:17:52 +0000 (12:17 +0800)]
RDMA/mana_ib: initialize err for empty send WR lists
mana_ib_post_send() returns err after walking the send work request list.
If the caller passes an empty list, the loop is skipped and err is not
assigned.
Initialize err to 0 so an empty send work request list returns success
instead of stack data.
Ruoyu Wang [Thu, 18 Jun 2026 04:17:51 +0000 (12:17 +0800)]
RDMA/erdma: initialize ret for empty receive WR lists
erdma_post_recv() returns ret after walking the receive work request list.
If the caller passes an empty list, the loop is skipped and ret is not
assigned.
Initialize ret to 0 so an empty receive work request list returns success
instead of stack data.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation") Link: https://patch.msgid.link/r/20260618041752.481193-1-ruoyuw560@gmail.com Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com> Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Jacob Moroni [Wed, 17 Jun 2026 16:40:13 +0000 (16:40 +0000)]
RDMA/irdma: Prevent user-triggered null deref on QP create
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://patch.msgid.link/r/20260617164013.280790-1-jmoroni@google.com Signed-off-by: Jacob Moroni <jmoroni@google.com> Reviewed-by: David Hu <xuehaohu@google.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and batman-adv.
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth:
- virtio_net: disable cb when NAPI is busy-polled
- lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth:
- mlx5e: fix use-after-free of metadata_dst on RX SC delete
- enetc: check the number of BDs needed for xdp_frame
- fbnic: don't cache shinfo across skb realloc"
* tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net/mlx5: HWS, fix matcher leak on resize target setup failure
net/sched: hhf: clear heavy-hitter state on reset
net/sched: dualpi2: clear stale classification on filter miss
net/sched: act_bpf: use rcu_dereference_bh() to read the filter
selftests: drv-net: tso: don't touch dangerous feature bits
cxgb4: Fix decode strings dump for T6 adapters
virtio_net: disable cb when NAPI is busy-polled
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
selftests: net: bump default cmd() timeout to 20 seconds
bridge: stp: Fix a potential use-after-free when deleting a bridge
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
net: gianfar: dispose irq mappings on probe failure and device removal
net: lan743x: Initialize eth_syslock spinlock before use
net: libwx: fix VMDQ mask for 1-queue mode
net: airoha: fix max receive size configuration
fsl/fman: Free init resources on KeyGen failure in fman_init()
netfilter: nftables: restrict checkum update offset
netfilter: nftables: restrict linklayer and network header writes
netfilter: nfnetlink_queue: restrict writes to network header
netfilter: nft_fib: reject fib expression on the netdev egress hook
...
Gerald Schaefer [Tue, 23 Jun 2026 17:44:06 +0000 (19:44 +0200)]
s390/monwriter: Reject buffer reuse with different data length
When data buffers are reused, e.g. for interval sample records, the
first record determines the data length, and the size of the buffer for
user copy. Current monwriter code does not check if the data length was
changed for subsequent records, which also would never happen for valid
user programs.
However, a malicious user could change the data length, resulting in out
of bounds user copy to the kernel buffer, and memory corruption. By
default, the monwriter misc device is created with root-only permissions,
so practical impact is typically low.
Fix this by checking for changed data length and rejecting such records.
watchdog: ni903x_wdt: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
ni903x_wdt watchdog driver.
Fixes: d37ec2fbab55 ("watchdog: ni903x_wdt: Convert to a platform driver") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/2280455.irdbgypaU6@rafael.j.wysocki Signed-off-by: Guenter Roeck <linux@roeck-us.net>
watchdog: s32g_wdt: remove incorrect options in watchdog_info struct
The s32g_wdt driver uses two incorrect constants in the options field
of its watchdog_info struct. This bit mask should contain WDIOF_*
constants, but the driver uses two WDIOC_* ioctl constants (in addition
to correct WDIOF_* constants). This causes many incorrect bits to be
set in the bit mask. The functionality indicated by these ioctl
constants is supported by all drivers using the watchdog framework, so
this patch simply removes them.
Fixes: bd3f54ec559b ("watchdog: Add the Watchdog Timer for the NXP S32 platform") Cc: stable@vger.kernel.org # 6.18+ Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260505024409.60301-1-enelsonmoore@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Yousef Alhouseen [Tue, 30 Jun 2026 21:18:27 +0000 (23:18 +0200)]
ublk: snapshot batch commands before preparing I/O
The batch prepare path rereads its userspace element array when rolling
back a partially prepared batch. Userspace can change an already
processed tag before the second read, causing rollback to reject the
replacement tag and leave earlier I/O slots prepared. The
WARN_ON_ONCE() in the rollback path then fires.
Copy the bounded batch into kernel memory before changing any I/O state
and use the same snapshot for preparation and rollback. Commit and fetch
batches retain the existing chunked userspace walk.
Jacob Moroni [Wed, 17 Jun 2026 14:19:36 +0000 (14:19 +0000)]
RDMA/irdma: Prevent rereg_mr for non-mem regions
When a QP/CQ/SRQ is created, a two step process is used
where the buffer is allocated in userspace and explicitly
registered with the normal reg_mr mechanism prior to creating
the actual QP/CQ/SRQ object.
These special registrations are indicated via an ABI field
so the driver knows that they do not have a valid mkey and
to skip the actual CQP command submission.
Since these are real MR objects from the core's perspective,
it is possible for a user application to invoke rereg_mr on them
and cause a real CQP op to be emitted with the zero-initialized
mkey value of 0.
Fix this by preventing rereg_mr on these special regions.
Fixes: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region") Signed-off-by: Jacob Moroni <jmoroni@google.com> Reviewed-by: David Hu <xuehaohu@google.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Sven Eckelmann [Thu, 2 Jul 2026 09:46:21 +0000 (11:46 +0200)]
batman-adv: ensure minimal ethernet header on TX
As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have
at least eth header len bytes"), it is possible by for a local user with
eBPF TC hook access to attach a tc filter which truncates the packet and
redirects to an batadv interface. But the code assumes that at least
ETH_HLEN bytes are available and thus might read outside of the available
buffer.
The batadv_interface_tx() must therefore always check itself if enough data
is available for the ethernet header and don't rely on min_header_len.
Jiri Olsa [Wed, 1 Jul 2026 11:13:25 +0000 (13:13 +0200)]
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
In the unregister path we use __in_uprobe_trampoline check with
current->mm for the VMA lookup, which is wrong, because we are
in the tracer context, not the traced process.
Add mm_struct pointer argument to __in_uprobe_trampoline and
changing related callers to pass proper mm_struct pointer.
Fixes: ba2bfc97b462 ("uprobes/x86: Add support to optimize uprobes") Reported-by: syzbot+61ce80689253f42e6d80@syzkaller.appspotmail.com Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: syzbot+61ce80689253f42e6d80@syzkaller.appspotmail.com Link: https://patch.msgid.link/20260701111337.53943-2-jolsa@kernel.org
David Windsor [Tue, 30 Jun 2026 00:13:34 +0000 (20:13 -0400)]
selftests/x86: Add shadow stack uprobe CALL test
Add coverage for entry uprobes installed on CALL instructions while user
shadow stack is enabled. The test puts an entry uprobe on a helper whose
first instruction is a relative CALL, then verifies that the call/return
sequence completes without SIGSEGV.
This catches regressions where x86 uprobe CALL emulation updates the
regular user stack but leaves the CET shadow stack stale.
David Windsor [Tue, 30 Jun 2026 00:13:33 +0000 (20:13 -0400)]
x86/uprobes: Keep shadow stack in sync for emulated CALLs
Uprobe CALL emulation updates the normal user stack, but not the CET user
shadow stack. The subsequent RET then sees a stale shadow stack entry and
raises #CP.
Update the relative CALL emulation and XOL CALL fixup paths to keep the
shadow stack in sync.
Fixes: 488af8ea7131 ("x86/shstk: Wire in shadow stack interface") Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Link: https://patch.msgid.link/8b5b1c7407b98f31664ad7b6a6faf20d2d4a6cad.1782777969.git.dwindsor@gmail.com
Taeyang Lee [Sun, 14 Jun 2026 14:22:18 +0000 (23:22 +0900)]
perf/core: Detach event groups during remove_on_exec
perf_event_remove_on_exec() removes events by calling
perf_event_exit_event(). For top-level events, this removes the event from
the context with DETACH_EXIT only.
This can leave inconsistent group state when a removed event is a group
leader and the group contains siblings without remove_on_exec. If the group
was active, the surviving siblings can remain active and attached to the
removed leader's sibling list, but are no longer represented by a valid
group leader on the PMU context active lists.
A later close of the removed leader uses DETACH_GROUP and can promote the
still-active siblings from this stale group state. The next schedule-in can
then add an already-linked active_list entry again, corrupting the PMU
context active list.
With DEBUG_LIST enabled, this is caught as a list_add double-add in
merge_sched_in().
Fix this by detaching group relationships when remove_on_exec removes an
event. This preserves the existing task-exit and revoke behavior, while
ensuring surviving siblings are ungrouped before the removed event leaves
the context.
Or Gerlitz [Wed, 17 Jun 2026 11:21:05 +0000 (14:21 +0300)]
RDMA/cma: Fix hardware address comparison length in netevent callback
The cited commit hardcoded the hardware address comparison len to ETH_ALEN.
This breaks IPoIB, which uses 20-byte addresses. By truncating the
memcmp, the CMA may incorrectly assume the target address is
unchanged and fails to abort the stalled connection.
Fix this by replacing ETH_ALEN with the dynamic neigh->dev->addr_len
to correctly evaluate the full address regardless of the link layer.
Jia He [Tue, 30 Jun 2026 22:23:47 +0000 (22:23 +0000)]
arm64/sysreg: Fix BWE field encoding in ID_AA64DFR2_EL1
Commit 93d7356e4b30 ("arm64: sysreg: Describe ID_AA64DFR2_EL1 fields")
encodes the FEAT_BWE2 value of the BWE field as '0b0002'. Binary
literals only accept the digits 0 and 1, so the intended value is 2,
i.e. 0b0010.
The macro generated by gen-sysreg.awk currently expands to
#define ID_AA64DFR2_EL1_BWE_FEAT_BWE2 UL(0b0002)
is not legal C and would fail to compile if any in-tree code referenced
it. At present no caller uses this enum value, so the kernel still
builds cleanly, but the bug is latent.
Fix the typo by using the correct binary literal 0b0010.
Cc: Bin Guo <guobin@linux.alibaba.com> Fixes: 93d7356e4b30 ("arm64: sysreg: Describe ID_AA64DFR2_EL1 fields") Signed-off-by: Jia He <justin.he@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Oliver Upton <oupton@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
Matthew Auld [Thu, 25 Jun 2026 15:20:58 +0000 (16:20 +0100)]
drm/xe/pt: prevent invalid cursor access for purged BOs
During a page table walk for binding, xe_pt_stage_bind() explicitly
skips initializing the xe_res_cursor for purged BOs, treating them
similarly to NULL VMAs by only setting the cursor size.
However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check
if the BO was purged before attempting to walk the cursor using
xe_res_dma() and xe_res_next(). Because the cursor was left
uninitialized for purged BOs, this falls through and triggers
warnings like:
WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next
Fix this by explicitly checking if the BO is purged in both
xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just
as we do for NULL VMAs, avoiding the invalid cursor accesses entirely.
As a precaution, also zero-initialize the cursor in xe_pt_stage_bind()
to ensure we don't pass garbage data into the page table walkers
if we ever hit a similar edge case in the future.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8418 Fixes: ad9843aac91a ("drm/xe/madvise: Implement purgeable buffer object support") Assisted-by: Copilot:gemini-3.1-pro-preview Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Arvind Yadav <arvind.yadav@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev> Link: https://patch.msgid.link/20260625152054.450125-8-matthew.auld@intel.com
(cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Matthew Auld [Thu, 25 Jun 2026 15:20:56 +0000 (16:20 +0100)]
drm/xe: fix NPD in bo_meminfo()
When a buffer object is purged, its ttm.resource is set to NULL via the
TTM pipeline gutting flow. However, the BO remains in the client's
object list until userspace explicitly closes the GEM handle. If memory
stats are queried during this time, accessing bo->ttm.resource->mem_type
will result in a NULL pointer dereference.
Fix this by safely skipping purged BOs in bo_meminfo, as they no longer
consume any memory.
User is getting NPD on device resume, and possible theory is that in
bo_move(), if we need to evict something to SYSTEM to save the CCS state,
but the BO is marked as dontneed, this won't trigger a move but will
nuke the pages, leaving us with a NULL bo resource. And the meminfo()
doesn't look ready to handle a NULL resource.
v2 (Sashiko):
- There could potentially be other cases where we might end up with a
NULL resource, so make this a general NULL check for now.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8419 Fixes: ad9843aac91a ("drm/xe/madvise: Implement purgeable buffer object support") Assisted-by: Copilot:gemini-3.1-pro-preview Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Arvind Yadav <arvind.yadav@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev> Link: https://patch.msgid.link/20260625152054.450125-6-matthew.auld@intel.com
(cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Michal Wajdeczko [Wed, 27 May 2026 18:37:35 +0000 (20:37 +0200)]
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
Currently defined VF/PF relay actions use regular REQUEST messages
only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT
messages as this would result in breaking the VFPF ABI protocol
and also might trigger an assert on the PF side.
Shuicheng Lin [Fri, 26 Jun 2026 21:06:31 +0000 (21:06 +0000)]
drm/xe/hw_engine: Fix double-free of managed BO in error path
The error path in hw_engine_init() explicitly frees a BO allocated
with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm().
Since the managed BO already has a devm cleanup action registered,
this causes a double-free when devm unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
Shuicheng Lin [Thu, 25 Jun 2026 22:44:52 +0000 (22:44 +0000)]
drm/xe/userptr: Drop bogus static from finish in force_invalidate
The local "finish" pointer in xe_vma_userptr_force_invalidate() is
unconditionally written before each read, so the static storage class
serves no purpose. Worse, it makes the variable a process-wide shared
slot: the function's per-VM asserts do not exclude concurrent callers
on different VMs, so two such callers can race on the slot and take
the wrong if (finish) branch.
The function is gated by CONFIG_DRM_XE_USERPTR_INVAL_INJECT
(developer/test option, default n), so production builds are
unaffected.
Drop the static.
Fixes: 18c4e536959e ("drm/xe/userptr: Convert invalidation to two-pass MMU notifier") Assisted-by: Claude:claude-opus-4.7 Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Zongyao Bai <zongyao.bai@intel.com> Link: https://patch.msgid.link/20260625224452.3243231-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit ed382e3b07fae51a09d7290485bff0592f6b168b) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Shuicheng Lin [Thu, 25 Jun 2026 21:56:15 +0000 (21:56 +0000)]
drm/xe/userptr: Hold notifier_lock for write on inject test path
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
Acquire notifier_lock for write in pre-commit when the inject Kconfig
is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock().
Rename xe_svm_assert_held_read() to
xe_svm_assert_held_read_or_inject_write() so it asserts the correct
mode under each build configuration. Production builds
(CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode
behavior bit-for-bit.
Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") Assisted-by: Claude:claude-opus-4.7 Cc: Matthew Auld <matthew.auld@intel.com> Cc: Zongyao Bai <zongyao.bai@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260625215615.3016892-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Matthew Auld [Fri, 12 Jun 2026 17:05:02 +0000 (18:05 +0100)]
drm/xe/display: skip FORCE_WC and vm_bound check for external dma-bufs
Currently, xe_display_bo_framebuffer_init() unconditionally attempts to
apply XE_BO_FLAG_FORCE_WC to the buffer and rejects the FB creation with
-EINVAL if the BO is already VM_BINDed.
However, for imported dma-bufs (ttm_bo_type_sg), this check doesn't seem
to make much sense since CPU caching policy is entirely controlled by
the exporter. Plus there is no place to set this flag, in the first
place. Also this is not rejected if not yet vm_binded, but that seems
arbitrary since setting or not setting FORCE_WC should a noop either
way, at this stage, and whether it is currently VM_BINDed makes no
difference.
Currently if we run an app and offload rendering to an external dGPU,
like NV or another xe device, the dma-buf passed back to the compositor
(igpu) will be an actual external import from xe pov, and it will be
missing FORCE_WC, and if the compositor side did a VM_BIND before
turning into it into an fb the whole thing gets rejected.
So it looks like we either need to reject outright, no matter what, or
this usecase is valid and we need to loosen the restriction for sg
buffers. Proposing here to loosen the restriction.
Matthew Brost [Wed, 17 Jun 2026 13:51:01 +0000 (06:51 -0700)]
drm/xe: Return error on non-migratable faults requiring devmem
Non-migratable faults that require devmem incorrectly jump to the 'out'
label, which squashes the error code intended to be returned to the
upper layers. Fix this by returning -EACCES instead.
Reported-by: Sashiko <sashiko-bot@kernel.org> Fixes: 4208fac3dce5 ("drm/xe: Add more SVM GT stats") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://patch.msgid.link/20260617135101.1245574-1-matthew.brost@intel.com
(cherry picked from commit c4508edb2c723de93717272488ea65b165637eac) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Ashutosh Dixit [Mon, 15 Jun 2026 22:42:27 +0000 (15:42 -0700)]
drm/xe/rtp: Ensure locking/ref counting for OA whitelists
Since multiple OA streams might be open in parallel on a gt, ensure that
proper locking is in place. Also ensure that OA registers are whitelisted
when the first OA stream is open and de-whitelisted after the last OA
stream is closed.
Ashutosh Dixit [Mon, 15 Jun 2026 22:42:26 +0000 (15:42 -0700)]
drm/xe/oa: (De-)whitelist OA registers on OA stream open/release
Whitelist OA registers on stream open and de-whitelist on stream
close/release. Whitelisting is only done when 'stream->sample' is
true. 'stream->sample' is only true when (a) xe_observation_paranoid is set
to false by system admin, or (b) the process is perfmon_capable(). This
therefore enforces the OA register whitelisting security requirements.
Ashutosh Dixit [Mon, 15 Jun 2026 22:42:25 +0000 (15:42 -0700)]
drm/xe/rtp: (De-)whitelist OA registers for all hwe's for a gt
Whitelist or de-whitelist OA registers for all hwe's on the gt on which the
OA stream is opened. This simplifies the case where an oa unit has 0
attached hwe's (but which monitors OA events on the associated GT).
projects / thirdparty / kernel / linux.git / log
