arm64: defconfig: Enable PCI M.2 power sequencing driver
POWER_SEQUENCING_PCIE_M2 driver handles power supply to the PCIe M.2
connectors and is required on wide variety of ARM64 platforms such as
Qcom Snapdragon X Elite laptops and Mediatek Dojo Chromebooks.
The load_primary_binaries() function is overly complex and has som large
variables on the stack, which can cause warnings depending on CONFIG_FRAME_WARN
setting:
drivers/staging/media/atomisp/pci/sh_css.c: In function 'load_primary_binaries':
drivers/staging/media/atomisp/pci/sh_css.c:5260:1: error: the frame size of 1560 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Half of the stack usage is for the prim_descr[] array, but only one
member of the array is used at any given time.
Reduce the stack usage by turning the array into a single structure.
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Arnd Bergmann [Wed, 20 May 2026 10:12:33 +0000 (12:12 +0200)]
Merge tag 'renesas-dts-for-v7.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v7.2
- Add GPU support for R-Car M3-W(+)-based ULCB and Salvator-X(S)
development boards,
- Add Ethernet, OPP table, interrupt, pin control, and watchdog
support for the RZ/G3L SoC and the RZ/G3L SMARC SoM board,
- Add Coresight support for the R-Mobile A1 and APE6 SoCs, and the
Armadillo-800 EVA and APE6EVM development boards,
- Miscellaneous fixes and improvements.
arm64: Kconfig: drop unneeded dependency on OF_GPIO for ARCH_MVEBU
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. ARCH_MVEBU already selects GPIOLIB, drop the redundant
OF_GPIO dependency.
platform/x86: wireless-hotkey: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 wireless-hotkey driver.
Fixes: 8507277ef132 ("platform/x86: wireless-hotkey: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/3899916.MHq7AAxBmi@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: toshiba_haps: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_haps driver.
Fixes: 3a96c7915d93 ("platform/x86: toshiba_haps: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/2285136.Mh6RI2rZIc@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: toshiba_bluetooth: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_bluetooth driver.
Fixes: 553b2ac59fbb ("platform/x86: toshiba_bluetooth: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/2715450.Lt9SDvczpP@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: toshiba_acpi: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_acpi driver.
Fixes: 246d6cefe525 ("platform/x86: toshiba_acpi: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/1973170.CQOukoFCf9@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: system76: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 system76 driver.
Fixes: 80b8f68b94ab ("platform/x86: system76: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/2072699.usQuhbGJ8B@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: sony-laptop: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 sony-laptop driver.
Fixes: 138db7ee58c0 ("platform/x86: sony-laptop: Convert PIC driver to a platform one") Fixes: 14004dd31caa ("platform/x86: sony-laptop: Convert NC driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/1871155.VLH7GnMWUR@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: panasonic-laptop: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 panasonic-laptop driver.
Fixes: de6837243af0 ("platform/x86: panasonic-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/3353471.5fSG56mABF@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: lg-laptop: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 lg-laptop driver.
Fixes: 2d9cb20610f7 ("platform/x86: lg-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/3706551.iIbC2pHGDl@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: intel/smartconnect: Check ACPI_HANDLE() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel/smartconnect driver.
Fixes: 8a44bd3ffdb2 ("platform/x86: intel/smartconnect: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/7956676.EvYhyI6sBW@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: intel/rst: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 intel/rst driver.
Fixes: 163a68a31f74 ("platform/x86: intel/rst: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/2051525.PYKUYFuaPT@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: fujitsu-tablet: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 fujitsu-tablet driver.
Fixes: bd13b265d386 ("platform/x86: fujitsu-tablet: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/10861611.nUPlyArG6x@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: fujitsu: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 fujitsu-laptop driver.
Fixes: 6da22b031a3c ("platform/x86: fujitsu: Convert laptop driver to a platform one") Fixes: d5c9212ccfaa ("platform/x86: fujitsu: Convert backlight driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jonathan Woithe <jwoithe@just42.net> Link: https://patch.msgid.link/3430329.44csPzL39Z@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: eeepc-laptop: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 eeepc-laptop driver.
Fixes: 079b59fd2d79 ("platform/x86: eeepc-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/3056852.e9J7NaK4W3@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: dell/dell-rbtn: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 dell-rbtn driver.
Fixes: 19ebacfb442b ("platform/x86: dell/dell-rbtn: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/2276487.irdbgypaU6@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: asus-laptop: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 asus-laptop driver.
Fixes: ba19eb10170b ("platform/x86: asus-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/5083741.GXAFRqVoOG@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Arnd Bergmann [Thu, 7 May 2026 21:24:50 +0000 (23:24 +0200)]
p54spi: convert to devicetree
The Prism54 SPI driver hardcodes GPIO numbers and expects users to
pass them as module parameters, apparently a relic from its life as a
staging driver. This works because there is only one user, the Nokia
N8x0 tablet.
Convert this to the gpio descriptor interface and DT based probing
to improve this and simplify the code at the same time.
Arnd Bergmann [Thu, 7 May 2026 21:24:49 +0000 (23:24 +0200)]
dt-bindings: net: add st,stlc4560/p54spi binding
The SPI version of Prism54 was sold under a couple of different
names and supported by the Linux p54spi driver, but there was
never a DT binding for it.
Document the four known names of this device and the properties
that are sufficient for its use on the Nokia N8x0 tablet.
As I don't have this hardware or documentation for it, this is
purely based on existing usage in the driver.
platform/x86: acer-wireless: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 acer-wireless driver.
Fixes: f7e648027d7e ("platform/x86: acer-wireless: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/4746824.LvFx2qVVIh@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Daniel Gabay [Fri, 15 May 2026 11:28:06 +0000 (14:28 +0300)]
wifi: mac80211: allow cipher change on NAN_DATA interfaces
ieee80211_key_link() rejects pairwise key installation when the
cipher differs from the existing PTK. Per Wi-Fi Aware version 4.0
section 7.4, the ND-TKSA between the same NDI pair shall be updated
when a new NDP requires a stronger cipher suite.
Exempt NL80211_IFTYPE_NAN_DATA from the same-cipher enforcement so
the PTK can be replaced with a different cipher.
Ilan Peer [Fri, 15 May 2026 11:15:16 +0000 (14:15 +0300)]
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
Do not declare support for Extended Key ID for NAN, as defined in
section 7.4 in the WiFi Aware specification v4.0 (in order to support
security association upgrade).
Miri Korenblit [Wed, 13 May 2026 15:26:56 +0000 (18:26 +0300)]
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind.
Ilan Peer [Wed, 13 May 2026 14:24:22 +0000 (17:24 +0300)]
wifi: mac80211: Allow per station GTK for NAN Data interfaces
The WiFi Aware specification (v4.0) requires that NAN devices that
support security would also support per station GTK. Thus, allow
per station GTK installation to the driver on NAN Data interfaces.
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
tested: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20260513172418.37a8e259e611.I39bb9f3c1a65a8184124f531c18e121dc123d411@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
When userspace creates a new hwsim radio with both
HWSIM_ATTR_MULTI_RADIO and HWSIM_ATTR_SUPPORT_NAN_DEVICE,
hwsim_new_radio_nl() sets BIT(NL80211_IFTYPE_NAN_DATA) in
wiphy->interface_modes while configuring the wiphy with
n_radio > 1. This violates the invariant checked in
wiphy_register():
triggering a WARN reachable from userspace via genetlink.
With panic_on_warn this becomes a denial of service.
Refuse the combination at parse time with -EINVAL and an
extack message, matching the cfg80211 constraint that NAN
is not supported on multi-radio wiphys.
Lachlan Hodges [Wed, 6 May 2026 13:19:25 +0000 (23:19 +1000)]
wifi: mac80211: don't recalc min def for S1G chan ctx
__ieee80211_recalc_chanctx_min_def() currently does not attempt
to find the min def for S1G widths, meaning the BW will never change.
However, the following call into ieee80211_chan_bw_change() will
lead to a WARN within ieee80211_chan_width_to_rx_bw(). Not only that,
this entire path is geared towards 20MHz based channels, so it doesn't
make sense anyway. For now, return early when calculating the mindef
for S1G channels.
Lachlan Hodges [Wed, 6 May 2026 13:19:24 +0000 (23:19 +1000)]
wifi: mac80211: skip NSS and BW init for S1G sta
Currently there is no S1G STA bandwidth support throughout mac80211
as existing support is all based on 20MHz widths. With the recent
STA NSS/BW handling rework, S1G associations now hit the new WARN within
ieee80211_chan_width_to_rx_bw() as the chandef is not a 20MHz based
width. For now, skip initialisating link_sta->pub->bandwidth for
S1G chandefs to avoid the WARN though this should at some point be
properly implemented since there are vendors that offer differing
maximum bandwidths.
Additionally, currently all S1G hardware out there is 1SS so rather
then introducing new parsing code which wouldn't be used anyway, just
initialise the NSS related fields to 1 and skip initialising the STA
bandwidth for S1G chandefs within ieee80211_sta_init_nss_bw_capa().
Johannes Berg [Tue, 5 May 2026 13:17:31 +0000 (15:17 +0200)]
wifi: mac80211: check stations are removed before MLD change
If an interface changes to/from MLD, then all stations related
to it must have been removed first. This is just natural since
we go from having links to not (or vice versa), but not doing
so also causes crashes in debugfs since vif changing to/from
MLD removes the entire debugfs for the vif, including stations.
Delete all stations but warn in this case, other code should
be handling it, in effect fail fast rather than doing a double
free or use-after-free in debugfs.
Kartik Nair [Sun, 10 May 2026 20:24:37 +0000 (01:54 +0530)]
wifi: cfg80211: wext: validate chandef in monitor mode
cfg80211_wext_siwfreq() constructs a channel definition for monitor
mode but passes it to cfg80211_set_monitor_channel() without first
validating it with cfg80211_chandef_valid(). This causes a WARN_ON
in cfg80211_chandef_dfs_required() when it receives an invalid chandef.
Add the missing cfg80211_chandef_valid() check before calling
cfg80211_set_monitor_channel() to return -EINVAL early on invalid
channel definitions, consistent with how other callers handle this.
Contains:
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
wifi: iwlwifi: mld: stop TX during firmware restart
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o BSS vif
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
wifi: iwlwifi: mld: disconnect only after 6 beacons without Rx
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
wifi: iwlwifi: use correct function to read STEP_URM register
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: mac80211: consume only present negotiated TTLM maps
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present.
Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Link: https://patch.msgid.link/20260515151719.1317659-2-michael.bommarito@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code.
Zhao Li [Sat, 9 May 2026 04:34:28 +0000 (12:34 +0800)]
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory.
Johannes Berg [Fri, 8 May 2026 07:10:32 +0000 (09:10 +0200)]
wifi: mac80211: fix multi-link element inheritance
When parsing a beacon, mac80211 erroneously inherits any
reconfiguration or EPCS multi-link elements from the outer
elements into the multi-BSSID profile that's requested, if
connected to a non-transmitted BSS, unless that profile
has a non-inheritance element.
This also happens if parsing a multi-BSSID profile that
doesn't have a non-inheritance element.
Fix this by having an empty non-inheritance element so
cfg80211_is_element_inherited() is invoked in these cases
and causes the parser to skip the elements that should
never be inherited.
Fixes: cf36cdef10e2 ("wifi: mac80211: Add support for parsing Reconfiguration Multi Link element") Fixes: 24711d60f849 ("wifi: mac80211: Support parsing EPCS ML element") Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20260508091032.92184c0a3f08.I3c43b0b63d2cef8a4ddddaef1c2faaeb1de711ad@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Fri, 8 May 2026 07:10:31 +0000 (09:10 +0200)]
wifi: mac80211: fix MLE defragmentation
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines.
In client mode, the extended capabilities are handled by the kernel
looking at the association frame. When the supplicant installs the keys
it calls sta_apply_parameters and it doesn't include the extended
capabilities since those can't change after association.
As a result, we overrode the max_amsdu_subframes that we set after
association.
Check that the ext_capa coming from the user space is valid before
looking at it. If the ext_capa is NULL, it really means that the
extended capabilities are not changed (as opposed to cleared).
The default value for max_amsdu_subframes is 0, which means there is no
limit. This value is valid and in case the association response frame
does not have extended capabilities, this is the value we should use.
Alexandru Hossu [Fri, 15 May 2026 10:29:08 +0000 (12:29 +0200)]
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted
from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15.
sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14),
making index 15 out-of-bounds.
A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response
action frame with a PER_STA_PROFILE subelement where link_id = 15. The
unsolicited-notification path (dialog_token = 0) is reachable any time
EPCS is already enabled, without any prior client request.
sdata->link[15] reads into the first word of sdata->activate_links_work
(a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD),
so the NULL check on the result does not catch the invalid access. The
garbage pointer is then passed to ieee80211_sta_wmm_params(), which
dereferences link->sdata and crashes the kernel.
The same class of bug was fixed for ieee80211_ml_reconfiguration() by
commit 162d331d833d ("wifi: mac80211: bounds-check link_id in
ieee80211_ml_reconfiguration").
Sudeep Holla [Sun, 17 May 2026 19:02:43 +0000 (20:02 +0100)]
firmware: arm_scmi: Validate Powercap domains before state access
Powercap protocol v2 keeps local enable and last-cap state per domain.
The v2 enable helpers and disabled-domain cap_set path indexed that state
before checking that the supplied domain id was valid.
Validate the domain before touching the per-domain state.
SENSOR_UPDATE carries one or more sensor readings after the fixed
notification header. The parser derives the expected reading count
from the sensor description, but it did not verify that the received
payload contains those entries before parsing them.
Reject truncated update notifications before reading the variable
array.
BASE_ERROR_EVENT carries a variable number of message reports,
with the count encoded in error_status. The notification parser used
that count without checking whether the received payload contained all
reported entries.
Reject truncated payloads before copying the report array.
Sudeep Holla [Sun, 17 May 2026 19:02:40 +0000 (20:02 +0100)]
firmware: arm_scmi: Read sensor config as 32-bit value
The SENSOR_CONFIG_GET response contains a 32-bit sensor_config field,
and the xfer is initialized with a 4-byte RX buffer. Reading it with
get_unaligned_le64() can consume bytes past the returned payload.
Use get_unaligned_le32() to match the protocol layout and the allocated
response size.
drm/imagination: Fix missing argument in pvr_power_fw_{en,dis}able()
Commit 42577ba79fbf ("drm/imagination: Rename FW booted to FW initialised")
dropped by mistake the last argument of the functions pvr_power_fw_enable()
and pvr_power_fw_disable(), leading to the following compile error:
CC [M] drivers/gpu/drm/imagination/pvr_power.o
drivers/gpu/drm/imagination/pvr_power.c: In function ‘pvr_power_device_suspend’:
drivers/gpu/drm/imagination/pvr_power.c:382:23: error: too few arguments to function ‘pvr_power_fw_disable’; expected 3, have 2
382 | err = pvr_power_fw_disable(pvr_dev, false);
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/imagination/pvr_power.c:93:1: note: declared here
93 | pvr_power_fw_disable(struct pvr_device *pvr_dev, bool hard_reset, bool rpm_suspend)
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/imagination/pvr_power.c: In function ‘pvr_power_device_resume’:
drivers/gpu/drm/imagination/pvr_power.c:412:23: error: too few arguments to function ‘pvr_power_fw_enable’; expected 2, have 1
412 | err = pvr_power_fw_enable(pvr_dev);
| ^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/imagination/pvr_power.c:122:1: note: declared here
122 | pvr_power_fw_enable(struct pvr_device *pvr_dev, bool rpm_resume)
| ^~~~~~~~~~~~~~~~~~~
make[6]: *** [scripts/Makefile.build:289: drivers/gpu/drm/imagination/pvr_power.o] Error 1
make[5]: *** [scripts/Makefile.build:548: drivers/gpu/drm/imagination] Error 2
make[4]: *** [scripts/Makefile.build:548: drivers/gpu/drm] Error 2
make[3]: *** [scripts/Makefile.build:548: drivers/gpu] Error 2
make[2]: *** [scripts/Makefile.build:548: drivers] Error 2
make[1]: *** [/home/javier/devel/linux/Makefile:2141: .] Error 2
make: *** [Makefile:248: __sub-make] Error 2
Andre Przywara [Tue, 2 Sep 2025 17:20:53 +0000 (18:20 +0100)]
firmware: smccc: Fix Arm SMCCC SOC_ID name call
Commit 5f9c23abc477 ("firmware: smccc: Support optional Arm SMCCC SOC_ID
name") introduced the SOC_ID name string call, which reports a human
readable string describing the SoC, as returned by firmware.
The SMCCC spec v1.6 describes this feature as AArch64 only, since we rely
on 8 characters to be transmitted per register. Consequently the SMCCC
call must use the AArch64 calling convention, which requires bit 30 of
the FID to be set. The spec is a bit confusing here, since it mentions
that in the parameter description ("2: SoC name (optionally implemented for
SMC64 calls, ..."), but still prints the FID explicitly as 0x80000002.
But as this FID is using the SMC32 calling convention (correct for the
other two calls), it will not match what any SMCCC conformant firmware is
expecting, so any call would return NOT_SUPPORTED.
Add a 64-bit version of the ARCH_SOC_ID FID macro, and use that for the
SoC name version of the call to fix the issue.
Aurelien Jarno [Tue, 19 May 2026 04:12:38 +0000 (06:12 +0200)]
riscv: dts: spacemit: enable SD card support on Milk-V Jupiter
Add complete SD card controller support with UHS high-speed modes.
- Enable sdhci0 controller with 4-bit bus width
- Configure card detect GPIO with pull-up
- Connect vmmc-supply to buck4 for 3.3V card power
- Connect vqmmc-supply to aldo1 for 1.8V/3.3V I/O switching
- Add dual pinctrl states for voltage-dependent pin configuration
- Support UHS-I SDR25, SDR50, and SDR104 modes
- Alias it as mmc1
Aurelien Jarno [Tue, 19 May 2026 04:12:37 +0000 (06:12 +0200)]
riscv: dts: spacemit: enable eMMC on Milk-V Jupiter
The Milk-V Jupiter board has a connector for an eMMC module. Add an
entry for it in the device tree and alias it mmc0.
Mark the device as non-removable as eMMC modules have no CD pin and are
not supposed to be inserted or removed while the system is running. On
systems without an eMMC module installed, the kernel emits the following
informational message during boot:
mmc0: SDHCI controller on d4281000.mmc [d4281000.mmc] using ADMA
mmc0: Failed to initialize a non-removable card
Aurelien Jarno [Tue, 19 May 2026 04:12:35 +0000 (06:12 +0200)]
riscv: dts: spacemit: set console baud rate on Milk-V Jupiter
Because the default console's baud rate is not set, defconfig kernels do
not have any serial output on this platform. Set the baud rate to
115200, matching what is used by U-Boot etc on this platform.
See-also: 24c12ca43b12c ("dts: spacemit: set console baud rate on bpif3") Fixes: 5b90a3d6092d9 ("riscv: dts: spacemit: Add Milk-V Jupiter board device tree") Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Yixun Lan <dlan@kernel.org> Link: https://patch.msgid.link/20260519041458.3287843-2-aurelien@aurel32.net Signed-off-by: Yixun Lan <dlan@kernel.org>
staging: media: atomisp: improve cleanup robustness in ia_css_stream_destroy_isp2401()
Remove the 'assert(entry)' call. In the atomisp driver, assert() is a
wrapper around BUG(), which intentionally crashes the entire kernel.
This is dangerous and inappropriate for a simple null pointer check
during stream teardown. Replace it with a safe 'if (!entry) continue;'
check.
Change the early 'return' to a 'continue'. In a destruction
path, it is better to proceed with cleaning up as many resources as
possible rather than aborting early, which would result in memory leaks
for the remaining pipes.
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
staging: media: atomisp: extract ISP2401 cleanup into helper function
To reduce indentation and improve the readability of
ia_css_stream_destroy(), extract the ISP2401-specific cleanup block into
a new static helper function, ia_css_stream_destroy_isp2401().
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
staging: media: atomisp: fix loop shadowing in ia_css_stream_destroy()
The nested loop inside the IS_ISP2401 block incorrectly uses the same
variable 'i' as the outer loop. This shadows the outer loop variable
and causes premature termination or skipped array elements.
Change the inner loop to use a new variable 'j' to prevent this.
Fixes: 113401c67386 ("media: atomisp: sh_css: Removed #ifdef ISP2401 to make code generic") Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Michael Ugrin [Sat, 11 Apr 2026 17:34:05 +0000 (10:34 -0700)]
staging: media: atomisp: use umin() for strscpy size arguments
Replace open-coded ternary min expressions with umin() in
strscpy() calls, as suggested by Dan Carpenter.
Signed-off-by: Michael Ugrin <mugrinphoto@gmail.com> Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
media: atomisp: avoid ACPI package count underflow in gmin_cfg_get_dsm
gmin_cfg_get_dsm() iterates over ACPI _DSM package elements as
key/value pairs using obj->package.count - 1 as the loop bound.
If package.count is 0, the subtraction underflows and may lead
to out-of-bounds access.
Use i + 1 < obj->package.count instead.
Signed-off-by: Mohamad El Harake <mohamedharake2006@gmail.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
media: atomisp: remove redundant call to ia_css_output0_configure()
The function configure_isp_from_args() contained a duplicate call to
ia_css_output0_configure() using the same output frame index. Remove the
redundant call to simplify the configuration path.
The ia_css_output0_configure() function acts as a configuration setter.
It populates a struct ia_css_output0_configuration from the frame info
and caches it in the binary parameters. Calling it twice with the same
out_frame[0] pointer merely overwrites the exact same state with
identical values. It has no cumulative state, neither does its order
matter relative to ia_css_copy_output_configure().
ia_css_configure_output0() writes into binary->mem_params.params[], a
software-side DMEM parameter buffer in kernel memory. The ISP firmware
receives these parameters later as a batch, not at the time of the call.
Calling a pure memory write twice with the same pointer and same value
simply overwrites the same location with identical data, there is no
hardware interaction that could require repetition.
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The FIXME comment noted that delay_frames can be NULL for certain
pipeline configurations, without knowing why. The reason is that when a
binary does not enable ref_frame, delay frame allocation is
intentionally skipped to save memory, leaving the pointers NULL by
design.
The ISP feature flags in binary->info->sp.enable accurately reflect
which features are active for a given binary. Using enable.ref_frame and
enable.tnr as the predicate for their respective configuration steps
ensures the configuration path stays in sync with what was actually
built into the pipeline
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
gc2235_probe() handles its error paths incorrectly.
If media_entity_pads_init() fails, gc2235_remove() is called, which
tears down the subdev and frees dev, but then still falls through to
atomisp_register_i2c_module(). This results in use-after-free.
If atomisp_register_i2c_module() fails, the media entity and control
handler are left initialized and dev is leaked.
gc2235_remove() unconditionally calls media_entity_cleanup() and
v4l2_ctrl_handler_free(), but these are not initialized at every
error path in gc2235_probe().
Replace gc2235_remove() calls in the probe error paths with explicit
unwind labels that free only the resources initialized at each point
of failure, in reverse order of initialization.
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by: Yuho Choi <dbgh9129@gmail.com> Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Karthikey Kadati [Thu, 15 Jan 2026 03:12:07 +0000 (08:42 +0530)]
media: atomisp: replace ia_css_region with v4l2_rect
The struct ia_css_region definition is redundant as struct v4l2_rect
provides the same functionality (left, top, width, height) and is the
standard V4L2 type.
Replace usage of ia_css_region with v4l2_rect in ia_css_dz_config
and remove the definition of ia_css_region from ia_css_types.h.
Also remove historical comments referencing the addition of zoom_region
and include <linux/videodev2.h> to support the v4l2_rect type.
Signed-off-by: Karthikey Kadati <karthikey3608@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The function mmu_get_page_table_base_index() accepts only one argument
mmu_ID_t, the block comment for it shows an erroneous additional
argument base_index[in]. Similarly, mmu_reg_load() only accepts two
arguments, however the block comment explaining it shows an erroneous
argument 'value[in]'.
Remove incorrect documentation lines.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Systems with the atomisp ISP do not have a lot of memory for modern
standards, so these are often under memory pressure and alloc_pages_bulk()
does not try very hard to free pages before returning an amount of pages
which is less then requested. This leads to streaming from the camera
often failing with a "alloc_pages_bulk() failed" error.
vmalloc() also uses alloc_pages_bulk(), but falls back to allocating one
page at a time when that fails.
Do the same in alloc_private_pages() to avoid these errors.
While at it also drop the weird custom GFP flags and just use GFP_KERNEL
and drop the dev_err() as alloc_pages() already complaints loudly if
it fails itself.
Closes: https://github.com/jfwells/linux-asus-t100ta/issues/4 Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Zilin Guan [Tue, 3 Feb 2026 16:31:34 +0000 (16:31 +0000)]
media: atomisp: Fix memory leak in atomisp_fixed_pattern_table()
atomisp_v4l2_framebuffer_to_css_frame() allocates memory for
temporary variable raw_black_frame, which must be released via
ia_css_frame_free() before the function returns. However, if
sh_css_set_black_frame() fails, the function returns immediately without
performing this cleanup, leading to a memory leak.
Fix this by assigning the return value of sh_css_set_black_frame() to
ret. This ensures that the error code is propagated while allowing the
execution to fall through to the ia_css_frame_free() cleanup call.
The bug was originally detected on v6.13-rc1 using an experimental
static analysis tool we are developing, and we have verified that the
issue persists in the latest mainline kernel. The tool is based on the
LLVM framework and is specifically designed to detect memory management
issues. It is currently under active development and not yet publicly
available.
We performed build testing on x86_64 with allyesconfig. Since triggering
this error path in atomisp requires specific Intel Atom ISP hardware and
firmware, we were unable to perform runtime testing and instead verified
the fix according to the code logic.
Fixes: 85b606e02ad7 ("media: atomisp: get rid of a bunch of other wrappers") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tomasz Unger [Thu, 5 Mar 2026 13:45:27 +0000 (14:45 +0100)]
media: staging: atomisp: Remove unnecessary return statement in void function
Remove redundant 'return;' at the end of void function
ia_css_dvs_statistics_get(). Void functions do not need an explicit
return statement at the end. No other occurrences in this file.
Found with checkpatch.pl --strict.
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Hamdan Khan [Mon, 9 Feb 2026 16:20:26 +0000 (21:20 +0500)]
staging: media: atomisp: Fix typos and formatting in headers
Update block and inline comments to follow kernel
commenting conventions, fix typos and wording, remove
redundant comments and reformat long comments for clarity
and line length consistency.
Although some comments used the /** ... */ style, they are not
kernel-doc comments and are converted to normal comment style.
No functional changes are intended.
Signed-off-by: Hamdan Khan <hamdankhan212@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tomasz Unger [Thu, 26 Feb 2026 11:16:53 +0000 (12:16 +0100)]
staging: media: atomisp: replace sprintf() with strscpy()
Auditing calls to sprintf(). This code is fine because we are
copying 9 characters into a 52 character buffer. But it would
be cleaner to use strscpy() instead. Additionally, the 2-argument
version of strscpy() checks at compile time that dst is an array,
not just a pointer.
This is the only sprintf() call in the whole driver.
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Removing the try_vesa_interface gate caused a backlight regression on
panels whose VBT correctly reports INTEL_BACKLIGHT_DISPLAY_DDI and whose
PWM path is the actual backlight control, but whose DPCD optimistically
advertises DP_EDP_BACKLIGHT_AUX_ENABLE_CAP / _BRIGHTNESS_AUX_SET_CAP.
After the commit such panels silently bind to the VESA AUX backlight
funcs; AUX writes complete but the panel ignores them, leaving
brightness stuck (no-op backlight). Observed on at least KBL and TGL
eDP setups.
Chukun Pan [Mon, 18 May 2026 10:00:30 +0000 (18:00 +0800)]
riscv: dts: spacemit: enable USB3 on OrangePi R2S
Enable the DWC3 USB3.0 controller and its associated PHY on the
OrangePi R2S. The USB regulator provides VBUS for USB2 and USB3
ports, but the USB2 ports are handled by a separate controller.
Xueqin Luo [Fri, 15 May 2026 02:42:42 +0000 (10:42 +0800)]
cpufreq: cppc: mask Desired_Excursion when autonomous selection is enabled
According to the ACPI 6.6 specification, the Desired_Excursion field is not
utilized when autonomous selection is enabled. In this mode, the bit is
architecturally ignored and does not carry meaningful information.
Currently, the kernel exposes the raw Performance Limited register
value to userspace through the cpufreq sysfs interface. This may lead to
misinterpretation, as userspace may assume Desired_Excursion is valid
even when autonomous selection is active.
To provide a stable and semantically correct ABI, mask out the
Desired_Excursion bit when autonomous selection is enabled, so that
userspace does not observe undefined or misleading values.
Writes are left unchanged, as the field is architecturally ignored in
this mode and write attempts are harmless.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
riscv: dts: spacemit: Add thermal sensor for K1 SoC
Include the Thermal Sensor node in the SpacemiT K1 dtsi
with definitions for registers, clocks, and interrupts.
Additionally, configure thermal zones for the soc, package, gpu, and
clusters to enable temperature monitoring via the thermal framework.
Tested-by: Vincent Legoll <legoll@online.fr> # OrangePi-RV2 Tested-by: Gong Shuai <gsh517025@gmail.com> Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org> Reviewed-by: Yixun Lan <dlan@kernel.org> Link: https://patch.msgid.link/20260427-k1-thermal-v5-3-df39187480ed@mailbox.org Signed-off-by: Yixun Lan <dlan@kernel.org>
Troy Mitchell [Mon, 18 May 2026 03:32:44 +0000 (11:32 +0800)]
riscv: dts: spacemit: Add PDMA controller node for K3 SoC
Add the Peripheral DMA (PDMA) controller node for the SpacemiT K3 SoC.
The PDMA controller provides general-purpose DMA capabilities for various
peripheral devices across the system to offload CPU data transfers.
Unlike the previous K1 SoC, where some DMA masters had memory addressing
limitations (e.g. restricted to the 0-4GB space) requiring a dedicated
dma-bus with dma-ranges to restrict memory allocations, the K3 DMA masters
have full memory addressing capabilities. Therefore, the PDMA node is now
instantiated directly under the main soc bus.
Abdun Nihaal [Mon, 11 May 2026 06:42:11 +0000 (12:12 +0530)]
OPP: of: Fix potential memory leak in opp_parse_supplies()
The memory allocated for microvolt, microamp and microwatt is not freed
in one of the paths in opp_parse_supplies() which returns directly.
Fix that by adding a goto to the error unwind ladder.
Heiko Carstens [Fri, 8 May 2026 15:02:48 +0000 (17:02 +0200)]
s390/processor: Implement cpu_relax() with cpu serialization
There are many loops in the form of
while (READ_ONCE(*somelocation))
cpu_relax();
Strictly speaking the architecture requires serialization instead of only a
compiler barrier in the loop so the READ_ONCE() will see an updated value.
However real hardware does not require this (see IBM z Systems Processor
Optimization Primer - FAQ [1]), but it is still recommended to add
serialization. Given that cpu_relax() is doing nothing useful, it does
not hurt to add the single and fast instruction which makes sure that
serialization happens, and such loops may be left a bit faster.
cpu_relax() is defined identically at two different locations.
Just like most other architectures remove the implementation at
asm/processor.h and only use the one at asm/vdso/processor.h,
avoiding code duplication.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Heiko Carstens [Fri, 8 May 2026 15:02:46 +0000 (17:02 +0200)]
s390/barrier: Use alternative instead of ifdef for bcr_serialize()
Use an alternative to implement bcr_serialize() and use alternative
patching to select between serialization and fast-serialization
depending on the corresponding facility bit.
Reviewed-by: Jan Polensky <japo@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Alexandra Winter [Wed, 22 Apr 2026 14:17:16 +0000 (16:17 +0200)]
s390/topology: Use zero-based numbering for containing entities
Start the numbering scheme for higher-level topology structures (like
socket, book, drawer) at zero, matching the convention for other hardware
identifiers like e.g. CPU numbers.
Hardware documentation, the Hardware Management Console and other tools
like zmemtopo also use zero-based numbering for these containing entities.
Aligning the numbering in sysfs, procfs, and tools like lscpu improves
user experience by making it easier to correlate topology information
across different interfaces.
If available, Linux on s390 derives this physical topology information from
the stsi function code 15 store_topology instruction, which is defined to
start at 1 for the lowest numbered container id. Subtract one, so
drawer_id, book_id and socket_id in cpu_topology[] start with 0 for the
lowest numbered entity; and /proc/cpuinfo and tools like 'lscpu -ye'
display the expected values.
For KVM guests, qemu emulates the stsi FC15 store_topology instruction.
This emulation currently erroneously starts id numbering at 0. A qemu fix
is proposed that makes this emulation compliant to the stsi architecture.
In case a guest with this patch is running on a qemu without the other fix,
it can happen that ids of 255 are displayed erroneously.
z/VM currently does not provide or emulate physical topology information to
its guests. So this patch does not change anything for z/VM guests.
Fixes: 10d385895055 ("[S390] topology: expose core identifier") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
qcomtee_object_user_init() is a variadic function and when the function
return because there's no dispatch callback in QCOMTEE_OBJECT_TYPE_CB
case, there's no va_end to cleanup "ap" object initialized by va_start
and that can cause undefined behavior. So make sure to use va_end before
returning the error code when there's no dispatch callback.
This is reported by Coverity Scan as "Missing varargs init or cleanup".
Fixes: d6e290837e50 ("tee: add Qualcomm TEE driver") Signed-off-by: Robertus Diawan Chris <robertusdchris@gmail.com> Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
KVM: arm64: Fix nVHE/pKVM hyp tracing error on invalid desc
pKVM must validate the host-provided tracing buffer descriptor.
However, if an error is found, the hypervisor would just return 0 to the
host. Fix the return value on validation failure.
While at it, rename the function to hyp_trace_desc_is_valid() and skip
validation for the nVHE mode as we trust host-provided data in that
case.
KVM: arm64: vgic: Free private_irqs when init fails after allocation
Companion to commit 250f25367b58 ("KVM: arm64: Tear down vGIC on
failed vCPU creation"), which added the missing kvm_vgic_vcpu_destroy()
call to the kvm_share_hyp() failure path in kvm_arch_vcpu_create(). The
kvm_vgic_vcpu_init() failure path immediately above it has the same
shape and still needs the same cleanup.
Call kvm_vgic_vcpu_destroy() when kvm_vgic_vcpu_init() fails so private
IRQs allocated before a redistributor iodev registration failure are
released before the failed vCPU is freed.
Fixes: 03b3d00a70b5 ("KVM: arm64: vgic: Allocate private interrupts on demand") Cc: stable@vger.kernel.org Cc: Will Deacon <will@kernel.org> Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Link: https://lore.kernel.org/r/20260519135042.2219239-1-michael.bommarito@gmail.com Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits
Userspace can restore an ITS Device Table Entry whose Size field encodes
more EventID bits than the virtual ITS supports. The live MAPD path
rejects that state, but vgic_its_restore_dte() accepts it and stores the
out-of-range value in dev->num_eventid_bits.
Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before
allocating the device. This mirrors the MAPD check and prevents the
restored state from reaching vgic_its_restore_itt(), where the unchecked
value can be converted into an oversized scan_its_table() range.
projects / thirdparty / kernel / linux.git / log
