Johan Hovold [Tue, 12 May 2026 07:47:33 +0000 (09:47 +0200)]
spi: sprd: fix error pointer deref after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to check the dma.enabled flag before trying to release the DMA
channels also on late probe errors to avoid dereferencing an error
pointer (or attempting to release a channel a second time).
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
Shengjiu Wang [Tue, 12 May 2026 06:52:52 +0000 (14:52 +0800)]
ASoC: fsl_sai: Eliminate possible interrupt storm during probe
When the SAI peripheral is left in a running state by the bootloader,
the driver can experience an interrupt storm during probe that prevents
successful initialization. This occurs because the current code registers
the IRQ handler before resetting the hardware to a known state.
The issue manifests as:
- Continuous interrupts firing immediately after devm_request_irq()
- Driver probe failure or system hang
- Error messages about unhandled interrupts
This is particularly problematic on systems where U-Boot or other
bootloaders enable SAI for boot-time audio feedback or diagnostics
and don't properly disable it before handing control to Linux.
Fix this by reordering the probe sequence:
1. Add fsl_sai_reset_hw() to clear TCSR/RCSR control registers,
which disables the transmitter/receiver and all interrupt sources
2. Move devm_request_irq() to after hardware initialization
This ensures the SAI is in a clean reset state before the interrupt
handler can be invoked, preventing the storm while maintaining proper
error handling and cleanup paths.
Johan Hovold [Tue, 12 May 2026 07:43:34 +0000 (09:43 +0200)]
spi: qup: fix error pointer deref after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to the clear the DMA channel pointers on setup failure to
avoid dereferencing an error pointer (or attempting to release a channel
a second time) on later probe errors or driver unbind.
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
The MT8196 AFE probe assigns reserved memory with
of_reserved_mem_device_init(), but never releases it.
This leaks the reserved memory assignment on driver
removal and on later probe failures.
The same probe path also uses unchecked pm_runtime_get_sync() calls.
A failure while resuming the device can leave the runtime PM usage
count in an unexpected state.
The regmap error path returns directly while the device is still
runtime active, and the remove path drops a runtime PM reference even
though successful probe has already released its temporary reference.
Register a devm cleanup action for the reserved memory assignment,
use pm_runtime_resume_and_get(), and only drop runtime PM references
on paths where they are actually held.
Arnd Bergmann [Mon, 18 May 2026 14:59:15 +0000 (16:59 +0200)]
Merge tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers
FSL SOC Changes for 7.1
Freescale QUICC Engine:
- Add missing cleanup on device removal and switch to irq_domain_create_linear()
in interrupt controller for IO Ports
- Panic on ioremap() failure in qe_reset()
Freescale Management Complex:
- Move fsl-mc over to device MSI infrastructure
- Wait for the MC firmware to complete its boot
* tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux:
bus: fsl-mc: wait for the MC firmware to complete its boot
soc: fsl: qe: panic on ioremap() failure in qe_reset()
soc: fsl: qe_ports_ic: switch to irq_domain_create_linear()
soc: fsl: qe_ports_ic: Add missing cleanup on device removal
virt: fsl_hypervisor: fix header kernel-doc warnings
platform-msi: Remove stale comment
fsl-mc: Remove legacy MSI implementation
fsl-mc: Switch over to per-device platform MSI
irqchip/gic-v3-its: Add fsl_mc device plumbing to the msi-parent handling
fsl-mc: Add minimal infrastructure to use platform MSI
fsl-mc: Remove MSI domain propagation to sub-devices
io_uring: propagate array_index_nospec opcode into req->opcode
Commit 1e988c3fe126 ("io_uring: prevent opcode speculation") added
array_index_nospec() to io_init_req(), but applied it only to a local
opcode variable. req->opcode is initialized from sqe->opcode before the
bounds check and remains the raw value.
Keep req->opcode as the canonical opcode in io_init_req(): reject
out-of-range values architecturally, then write the array_index_nospec()
result back to req->opcode before any table lookup. This keeps downstream
users of req->opcode from observing the raw user byte on a mispredicted
path.
No functional change: array_index_nospec() is a no-op for opcodes in
[0, IORING_OP_LAST), and out-of-range opcodes are still rejected at the
bounds check above the assignment.
arm64: defconfig: Enable PCI M.2 power sequencing driver
POWER_SEQUENCING_PCIE_M2 driver handles power supply to the PCIe M.2
connectors and is required on wide variety of ARM64 platforms such as
Qcom Snapdragon X Elite laptops and Mediatek Dojo Chromebooks.
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
devm_of_qcom_ice_get() currently returns NULL if ICE SCM is not available
or "qcom,ice" property is not found in DT. But this confuses the clients
since NULL doesn't convey the reason for failure. So return proper error
codes instead of NULL.
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
By the time the consumer driver calls devm_of_qcom_ice_get(), all the
platform devices for ICE nodes would've been created by
of_platform_default_populate().
So for the absence of any platform device, -ENODEV should not returned, not
-EPROBE_DEFER.
Fixes: 2afbf43a4aec ("soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver") Tested-by: Sumit Garg <sumit.garg@oss.qualcomm.com> # OP-TEE as TZ Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260518-qcom-ice-fix-v7-2-2a595382185b@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
The current platform driver design causes probe ordering races with
consumers (UFS, eMMC) due to ICE's dependency on SCM firmware calls. If ICE
probe fails (missing ICE SCM or DT registers), devm_of_qcom_ice_get() loops
with -EPROBE_DEFER, leaving consumers non-functional even when ICE should
be gracefully disabled. devm_of_qcom_ice_get() doesn't know if the ICE
driver probe has failed due to above reasons or it is waiting for the SCM
driver.
Moreover, there is no devlink dependency between ICE and consumer drivers
as 'qcom,ice' is not considered as a DT 'supplier'. So the consumer drivers
have no idea of when the ICE driver is going to probe.
To address these issues, store the error pointer in a global xarray with
ice node phandle as a key during probe in addition to the valid ice pointer
and synchronize both qcom_ice_probe() and of_qcom_ice_get() using a mutex.
If the xarray entry is NULL, then it implies that the driver is not
probed yet, so return -EPROBE_DEFER. If it has any error pointer, return
that error pointer directly. Otherwise, add the devlink as usual and return
the valid pointer to the consumer.
Xarray is used instead of platform drvdata, since driver core frees the
drvdata during probe failure. So it cannot be used to pass the error
pointer to the consumers.
Note that this change only fixes the standalone ICE DT node bindings and
not the ones with 'ice' range embedded in the consumer nodes, where there
is no issue.
Linus Torvalds [Mon, 18 May 2026 14:30:31 +0000 (07:30 -0700)]
Merge tag 'vfs-7.1-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a fixes for the current development cycle. Note that AI
related review sometimes delays fixes a bit because we find more fixes
for the fixes. I might try and send smaller but more fixes PRs if this
trend keeps up.
- Fix various netfslib bugs
- Fix an out-of-bounds write when listing idmappings
- Fix the return values in jfs_mkdir() and orangefs_mkdir()
- Fix a writeback writeback array overflow in fuse
- Fix a forced iversion increment on lazytime timestamp updates
- Reject a negative timeval component in kern_select()
- Fix error return when vfs_mkdir() fails in the cachefiles code
- Fix wrong error code returned for pidns ioctls"
* tag 'vfs-7.1-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
cachefiles: Fix error return when vfs_mkdir() fails
afs: Fix the locking used by afs_get_link()
netfs, afs: Fix write skipping in dir/link writepages
netfs: Fix netfs_read_folio() to wait on writeback
netfs: Fix folio->private handling in netfs_perform_write()
netfs: Fix partial invalidation of streaming-write folio
netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages()
netfs: Fix leak of request in netfs_write_begin() error handling
netfs: Fix early put of sink folio in netfs_read_gaps()
netfs: Fix write streaming disablement if fd open O_RDWR
netfs: Fix read-gaps to remove netfs_folio from filled folio
netfs: Fix potential deadlock in write-through mode
netfs: Fix streaming write being overwritten
netfs: Defer the emission of trace_netfs_folio()
netfs: Fix netfs_invalidate_folio() to clear dirty bit if all changes gone
netfs: Fix overrun check in netfs_extract_user_iter()
netfs: fix error handling in netfs_extract_user_iter()
netfs: Fix potential uninitialised var in netfs_extract_user_iter()
netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call
netfs: Fix zeropoint update where i_size > remote_i_size
...
drm/mediatek: mtk_hdmi_ddc: Fix non-static global variable
The struct 'mtk_hdmi_ddc_driver' is not used outside of the
mtk_hdmi_ddc.c file, so make it static to silence sparse warning:
```
drivers/gpu/drm/mediatek/mtk_hdmi_ddc.c:331:24: sparse: warning: symbol
'mtk_hdmi_ddc_driver' was not declared. Should it be static?
```
drm/mediatek: mtk_cec: Fix non-static global variable
The struct 'mtk_cec_driver' is not used outside of the
mtk_cec.c file, so make it static to silence sparse warning:
```
drivers/gpu/drm/mediatek/mtk_cec.c:243:24: sparse: warning: symbol
'mtk_cec_driver' was not declared. Should it be static?
```
drm/mediatek: mtk_hdmi_v2: Fix non-static global variable
The struct 'mtk_hdmi_v2_clk_names' is not used outside of the
mtk_hdmi_v2.c file, so make it static to silence sparse warning:
```
drivers/gpu/drm/mediatek/mtk_hdmi_v2.c:53:12: sparse: warning: symbol
'mtk_hdmi_v2_clk_names' was not declared. Should it be static?
```
drm/mediatek: mtk_hdmi_ddc_v2: Fix non-static global variable
The struct 'mtk_hdmi_ddc_v2_driver' is not used outside of the
mtk_hdmi_ddc_v2.c file, so make it static to silence sparse warning:
```
drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c:392:24: sparse: warning:
symbol 'mtk_hdmi_ddc_v2_driver' was not declared. Should it be
static?
```
Potin Lai [Mon, 23 Mar 2026 12:41:06 +0000 (20:41 +0800)]
ARM: dts: aspeed: Add Meta SanMiguel BMC
Add linux device tree entry for Meta (Facebook) SanMiguel compute-tray
BMC using AT2620 SoC.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Baochen Qiang [Thu, 14 May 2026 03:32:51 +0000 (11:32 +0800)]
wifi: ath12k: fix EHT TX MCS limitation due to wrong 20 MHz-only parsing
When connecting to an AP configured for EHT 20 MHz with a full EHT
MCS/NSS map (supporting MCS 0-13)
Supported EHT-MCS and NSS Set
EHT-MCS Map (BW <= 80MHz): 0x444444
.... .... .... .... .... 0100 = Rx Max Nss That Supports EHT-MCS 0-9: 4
.... .... .... .... 0100 .... = Tx Max Nss That Supports EHT-MCS 0-9: 4
.... .... .... 0100 .... .... = Rx Max Nss That Supports EHT-MCS 10-11: 4
.... .... 0100 .... .... .... = Tx Max Nss That Supports EHT-MCS 10-11: 4
.... 0100 .... .... .... .... = Rx Max Nss That Supports EHT-MCS 12-13: 4
0100 .... .... .... .... .... = Tx Max Nss That Supports EHT-MCS 12-13: 4
TX throughput is observed to be significantly lower than expected.
Investigation shows that TX rates are limited to EHT MCS 11, even though
the AP advertises support for EHT MCS 12/13.
The root cause is an incorrect parsing of the Supported EHT-MCS and NSS
Set element in ath12k_peer_assoc_h_eht().
IEEE Std 802.11be-2024 Figure 9-1074as describes the format for 20
MHz-Only Non-AP STAs.
IEEE Std 802.11be-2024 Figure 9-1074at describes the format for all
other AP and non-AP STAs.
Currently the first format is parsed when the peer advertises no wider
HE channel width support, without considering whether it is an AP or a
non-AP STA. This is incorrect: the peer AP's capabilities must be parsed
using Figure 9-1074at even when it operates on 20 MHz only. Parsing it
as Figure 9-1074as causes rx_tx_mcs13_max_nss to be interpreted as zero,
which is then passed to firmware, leading firmware to assume the peer
does not support MCS 13 and to limit TX rates at MCS 11.
Fix this by parsing the Figure 9-1074as format only when the peer is a
20 MHz-Only non-AP STA, i.e. when the local interface operates as AP or
mesh point.
Kyle Farnung [Thu, 14 May 2026 04:52:12 +0000 (21:52 -0700)]
wifi: ath11k: clear shared SRNG pointer state on restart
LMAC rings reuse the shared rdp/wrp pointer buffers without going
through the normal SRNG hw-init path that zeros non-LMAC ring
pointers. After restart, ath11k_hal_srng_clear() can therefore hand
stale hp/tp state from the previous firmware instance back to the new
one.
Clear the shared pointer buffers while keeping the allocations in
place so restart still avoids reallocating SRNG DMA memory, but starts
with fresh ring-pointer state.
Fixes: 32be3ca4cf78b ("wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/CAOPSVF04q6uvVdq8GTRLHBrVMdpt9=o9wVcFMc6f-yhmSBcZqQ@mail.gmail.com/ Signed-off-by: Kyle Farnung <kfarnung@gmail.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260513-kfarnung-ath11k-srng-clear-pointer-state-v1-1-bc700dd8b333@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Matthew Leach [Fri, 24 Apr 2026 09:50:35 +0000 (10:50 +0100)]
wifi: ath11k: fix peer resolution on rx path when peer_id=0
It has been observed that on certain chipsets a peer can be assigned
peer_id=0. For reception of non-aggregated MPDUs this is fine as
ath11k_dp_rx_h_find_peer() has a fallback case where it locates the peer
based upon the source MAC address. On an aggregated link, the mpdu_start
header is only populated by hardware on the first sub-MSDU. This causes
the peer resolution to be skipped for the subsequent MSDUs and the
encryption type of these frames to be set to an incorrect value,
resulting in these MSDUs being dropped by ieee80211.
ath11k_pci 0000:03:00.0: data rx skb 000000002f4b704d len 1534 peer xx:xx:xx:xx:xx:xx 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d1a fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 1 last_msdu 0
ath11k_pci 0000:03:00.0: data rx skb 0000000038acd580 len 1534 peer (null) 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d00 fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 0 last_msdu 1
Remove the null peer_id checks in ath11k_dp_rx_h_find_peer() and
ath11k_hal_rx_parse_mon_status_tlv(), allowing peers with an assigned ID
of 0 to be resolved.
Fixes: 2167fa606c0f ("ath11k: Add support for RX decapsulation offload") Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Signed-off-by: Matthew Leach <matthew.leach@collabora.com> Reviewed-by: P Praneesh <praneesh.p@oss.qualcomm.com> Link: https://patch.msgid.link/20260424-ath11k-null-peerid-workaround-v4-1-252b224d3cf6@collabora.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The mt8167 DSI controller is fully compatible with the one found in
mt2701. Unfortunately the device tree has a dedicated compatible for
mt8167 since 2022 and it cannot be changed with a fallback nor removed at
this point. The only way to get the device to work is to add the
compatible to the driver.
Cássio Gabriel [Mon, 18 May 2026 02:33:49 +0000 (23:33 -0300)]
ALSA: ctxfi: Keep line/mic notification controls per mixer
ctxfi stores the Line Capture Switch and Mic Capture Switch controls in
a file-scope kctls[] array so do_line_mic_switch() can notify the
opposite control when the shared line/mic input selection changes.
That storage is shared by all ctxfi cards. If more than one X-Fi card is
present, a later card can overwrite the pointers saved by an earlier one.
A control update on one card can then use another card's kcontrol object
for snd_ctl_notify(). If that other card is removed, the saved pointer can
also become stale.
Store those notification targets in struct ct_mixer instead. The mixer is
per-card state and matches the lifetime of the controls created for that
card.
drm/mediatek: Convert legacy DRM logging to drm_* helpers in mtk_dsi.c
Replace DRM_INFO(), DRM_WARN() and DRM_ERROR() calls in
drivers/gpu/drm/mediatek/mtk_dsi.c with the corresponding
drm_info(), drm_warn() and drm_err() helpers.
The drm_*() logging helpers take a struct drm_device * argument,
allowing the DRM core to prefix log messages with the correct device
name and instance. This is required to correctly distinguish log
messages on systems with multiple GPUs.
This change aligns the radeon driver with the DRM TODO item:
"Convert logging to drm_* functions with drm_device parameter".
Gustavo Sousa [Thu, 14 May 2026 21:44:46 +0000 (18:44 -0300)]
drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN4
The register COMMON_SLICE_CHICKEN4 is a MCR register on both Xe2 and
Xe3. Let's make sure to define a MCR version of it and use it for the
relevant IP versions.
Use XEHP_ as prefix for the register name, since it is MCR as of Xe_HP.
v2:
- Also change for one entry in lrc_tunnings, which was caught by
manual testing and add corresponging Fixes tag in commit message.
(Gustavo)
Fixes: 8d6f16f1f082 ("drm/xe: Extend Wa_22021007897 to Xe3 platforms") Fixes: e5c13e2c505b ("drm/xe/xe2hpg: Add Wa_22021007897") Fixes: 8ccf5f6b2295 ("drm/xe/tuning: Apply windower hardware filtering setting on Xe3 and Xe3p")
Bspec: 66534, 71185, 74417 Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patch.msgid.link/20260514-rtp-mcr-check-v3-3-30dd47855fee@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
(cherry picked from commit 75f65f1a4c06da1d87f28570a9d4cdad28f13360) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reading debugfs file (/sys/kernel/debug/dri/0/gt*/pf/adverse_events)
with CFI (Control Flow Integrity) enabled, the kernel panics at
xe_gt_debugfs_simple_show+0x82/0xc0.
xe_gt_debugfs_simple_show() declare a function pointer expecting int
return type, but xe_gt_sriov_pf_monitor_print_events() is void return
type, leading to CFI failure and kernel panic.
Michal Wajdeczko [Thu, 14 May 2026 15:57:26 +0000 (17:57 +0200)]
drm/xe/vf: Fix signature of print functions
We have plugged-in existing VF print functions into our GT debugfs
show helper as-is, but we missed that the helper expects functions
to return int, while they were defined as void. This can lead to
errors being reported when CFI is enabled.
Fixes: 63d8cb8fe3dd ("drm/xe/vf: Expose SR-IOV VF attributes to GT debugfs") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Mohanram Meenakshisundaram <mohanram.meenakshisundaram@intel.com> Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com> Link: https://patch.msgid.link/20260514155726.7165-1-michal.wajdeczko@intel.com
(cherry picked from commit 314e31c9a8a1c421ee4f7f755b9348aefbbca090) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Shuicheng Lin [Mon, 11 May 2026 15:41:34 +0000 (15:41 +0000)]
drm/xe/gsc: Fix double-free of managed BO in error path
The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO
allocated with xe_managed_bo_create_pin_map() via
xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm
cleanup action registered, this causes a double-free when devm
unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
Michal Wajdeczko [Mon, 11 May 2026 17:28:37 +0000 (19:28 +0200)]
drm/xe/memirq: Update interrupt handler logic
To workaround some corner case hardware limitations, new programming
note for the memory based interrupt handler suggests to assume that
some status bytes, like GT_MI_USER_INTERRUPT and GUC_INTR_GUC2HOST,
are always set. Update our interrupt handler to follow the new rules.
Bspec: 53672 Fixes: a6581ebe7685 ("drm/xe/vf: Introduce Memory Based Interrupts Handler") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patch.msgid.link/20260511172838.2299-2-michal.wajdeczko@intel.com
(cherry picked from commit 284f4cae4579eed9dd4406f18a6c1becc69f8931) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce a device tree node for the AST2600 PWM/Tach controller.
Describe register range, clock, reset, and cell configuration.
Set status to "disabled" by default.
Prepares for enabling PWM and tachometer support on platforms
utilizing this SoC.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Michal Pecio [Mon, 18 May 2026 05:32:58 +0000 (07:32 +0200)]
usb: core: Clean up SuperSpeed/eUSB2 descriptor validation logging
Core usually prints endpoint addresses with 0x%X format.
Change this code to use it too, instead of just %d.
Particularly for IN, 0x83 seems more readable than 131.
While at that, fix checkpatch warnings about multi-line
quoted strings, as well as missing or doubled whitespace
in those strings.
Michal Pecio [Mon, 18 May 2026 05:32:07 +0000 (07:32 +0200)]
usb: core: Fix up Interrupt IN endpoints with bogus wBytesPerInterval
Tao Xue found that some common devices violate USB 3.x section 9.6.7
by reporting wBytesPerInterval lower than the size of packets they
actually send. I confirmed that AX88179 may set it to 0 and RTL8153
CDC configuration sets it to 8 but sends both 8 and 16 byte packets:
Most xHCI host controllers neglect interrupt bandwidth reservations
and let such devices exceed theirs, some fail the URB with EOVERFLOW.
Assume that wBytesPerInterval lower than wMaxPacketSize is bogus and
increase it to the worst case maximum on interrupt IN endpoints. This
solves xHCI problems and appears to have no other effect. Interrupt
transfers are not limited to one interval and drivers submit URBs of
class defined size without looking at wBytesPerInterval. Any multi-
interval transfer is considered terminated by a packet shorter than
wMaxPacketSize regardless of wBytesPerInterval - see USB3 8.10.3.
Stay in spec on OUT endpoints and isochronous. No buggy devices are
known and we don't want to risk sending more data than the device
is prepared to handle or confusing isoc drivers regarding altsetting
capacities guaranteed by the device itself. And don't complain when
wMaxPacketSize <= wBytesPerInterval < wMaxPacketSize * (bMaxBurst+1)
because enabling this seems to be the exact goal of the spec.
Reported-and-tested-by: Tao Xue <xuetao09@huawei.com> Closes: https://lore.kernel.org/linux-usb/20260402021400.28853-1-xuetao09@huawei.com/ Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Link: https://patch.msgid.link/20260518073207.5b7d26e7.michal.pecio@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Pecio [Mon, 18 May 2026 05:31:21 +0000 (07:31 +0200)]
usb: core: Fix SuperSpeed root hub wMaxPacketSize
There is no good reason to have wBytesPerInterval < wMaxPacketSize -
either one is too low or the other too high, and we may want to warn
about such descriptors. Start with cleaning up our own root hubs.
USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of
SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize
from its former value of 4, which was derived from USB 2.0 spec and
the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2
10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports.
Boris Brezillon [Mon, 18 May 2026 11:41:45 +0000 (13:41 +0200)]
drm/gem: Make the GEM LRU lock part of drm_device
Recently, a few races have been discovered in the GEM LRU logic, all
of them caused by the fact the LRU lock is accessed through
gem->lru->lock, and that very same lock also protects changes to
gem->lru, leading to situations where gem->lru needs to first be
accessed without the lock held, to then get the lru to access the lock
through and finally take the lock and do the expected operation.
Currently, the only driver making use of this API (MSM) declares a
device-wide lock, and the user we're about to add (panthor) will
do the same. There's no evidence that we will ever have a driver
that wants different pools of LRUs protected by different locks under
the same drm_device. So we're better off moving this lock to drm_device
and always locking it through obj->dev->gem_lru_mutex, or directly
through dev->gem_lru_mutex.
If anyone ever needs more fine-grained locking, this can be revisited
to pass some drm_gem_lru_pool object representing the pool of LRUs
under a specific lock, but for now, the per-device lock seems to be
enough.
Fixes: e7c2af13f811 ("drm/gem: Add LRU/shrinker helper") Reported-by: Chia-I Wu <olvaffe@gmail.com> Closes: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/86 Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Link: https://patch.msgid.link/20260518-panthor-shrinker-fixes-v4-1-1920234470d5@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
usb: typec: ucsi: ccg: reject firmware images without a ':' record header
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL.
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values.
Dan Carpenter [Tue, 12 May 2026 10:14:59 +0000 (13:14 +0300)]
usb: typec: tipd: Fix error code in tps6598x_probe()
Set the error code on these two error paths. The existing code returns
success.
Fixes: 77ed2f4538da ("usb: typec: tipd: Use read_power_status function in probe") Fixes: 04041fd7d6ec ("usb: typec: tipd: Read data status in probe and cache its value") Cc: stable <stable@kernel.org> Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/agL9o7wUK1dOVBTy@stanley.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nirmoy Das [Thu, 14 May 2026 14:42:57 +0000 (07:42 -0700)]
ovl: keep err zero after successful ovl_cache_get()
ovl_iterate_merged() stores PTR_ERR(cache) in err before checking
IS_ERR(cache). On success err holds the truncated cache pointer and
can be returned as a bogus non-zero error.
The syzbot reproducer reaches this through overlay-on-overlay readdir:
Fengnan Chang [Wed, 13 May 2026 09:13:49 +0000 (17:13 +0800)]
dm: limit target bio polling to one shot
dm_poll_bio() is the ->poll_bio() callback for a stacked dm device.
The caller only knows about the dm queue, so it may decide to do a
spinning poll if it thinks a single queue is being polled. Passing those
flags unchanged to the mapped clone lets blk_mq_poll() spin on a target
queue from inside dm_poll_bio().
With io_uring IOPOLL on a dm-stripe target this can keep a task in
dm_poll_bio() -> bio_poll() -> blk_mq_poll()
long enough to trigger an RCU CPU stall, before io_uring gets back to
io_iopoll_check() and its need_resched() check.
Keep dm's ->poll_bio() bounded by forcing one-shot polling for target
bios. The caller can invoke dm_poll_bio() again if it wants to keep
polling, and it also gets a chance to reap completions or reschedule
between passes.
Mikulas Patocka [Mon, 11 May 2026 11:04:16 +0000 (13:04 +0200)]
dm-ioctl: report an error if a device has no table
When we send a message to a device that has no table, the return code was
not set. The code would return "2", which is not considered a valid return value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
As described in commit 2bc057692599 ("block: don't make REQ_POLLED imply
REQ_NOWAIT"), which fixed the same issue for the block device node, there
are valid cases to poll for I/O completion without REQ_NOWAIT.
Additionally, sing REQ_NOWAIT for file system writes is currently not
supported as file systems writes are not idempotent and would need a
retry of just the bio and not the entire operation to be fully supported.
Switch iomap to set REQ_POLLED and remove the now unused bio_set_polled
helper.
Leo Yan [Fri, 15 May 2026 20:08:35 +0000 (21:08 +0100)]
coresight: sysfs: Validate CPU online status for per-CPU sources
The current SysFS flow first enables the links and sink, then rolls back
to disable them if the source fails to enable. This failure can occur if
the associated CPU is offline, which causes the SMP call to fail.
Validate whether the associated CPU is online for a per-CPU tracer.
If the CPU is offline, return -ENODEV and bail out.
Tested-by: James Clark <james.clark@linaro.org> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Tested-by: Jie Gan <jie.gan@oss.qualcomm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-28-f88c4a3ecfe9@arm.com
Leo Yan [Fri, 15 May 2026 20:08:34 +0000 (21:08 +0100)]
coresight: Move CPU hotplug callbacks to core layer
This commit moves CPU hotplug callbacks from ETMv4 driver to core layer.
The motivation is the core layer can control all components on an
activated path rather but not only managing tracer in ETMv4 driver.
The perf event layer will disable CoreSight PMU event 'cs_etm' when
hotplug off a CPU. That means a perf mode will be always converted to
disabled mode in CPU hotplug. Arm CoreSight CPU hotplug callbacks only
need to handle the Sysfs mode and ignore the perf mode.
Add a 'mode' argument to coresight_pm_get_active_path() so it only
returns active paths for the relevant mode. Define the enum with bit
flags so it is safe for bitwise operations.
Change CPUHP_AP_ARM_CORESIGHT_STARTING to CPUHP_AP_ARM_CORESIGHT_ONLINE
so that the CPU hotplug callback runs in the online state and thread
context, allowing coresight_disable_sysfs() to be called directly to
disable the path.
Leo Yan [Fri, 15 May 2026 20:08:33 +0000 (21:08 +0100)]
coresight: sysfs: Increment refcount only for software source
Except for software sources (e.g. STM), other sources treat multiple
enables as equivalent to a single enable. The device mode already
tracks the binary state, so it is redundant to operate refcount.
Introduce a helper coresight_is_software_source() for check software
source. Refactor to maintain the refcount only for software sources.
This simplifies future CPU PM handling without refcount logic.
Gary Guo [Tue, 12 May 2026 12:09:53 +0000 (13:09 +0100)]
rust: pin-init: internal: project using full slot
Instead of projecting using pointer to a field project the full slot. This
further shifts the code generation from the initializer site to the struct
definition site, which means less code is generated overall.
It also makes the safety comment easier to justify, as now the projection
is done by the `#[pin_data]` macro which has full visibility of pinnedness
of fields.
The field alignment could also be checked on the `#[pin_data]` side;
however, since `init!()` macro works for other type of structs, we cannot
remove the alignment check from `init!`/`pin_init!` side anyway, so I opted
to still keep the alignment check in init.rs.
Gary Guo [Tue, 12 May 2026 12:09:52 +0000 (13:09 +0100)]
rust: pin-init: internal: project slots instead of references
By projecting slots, the `pin_init!` and `init!` code path can be more
unified. This also reduces the amount of macro-generated code and shifts
them to the shared infrastructure.
Gary Guo [Tue, 12 May 2026 12:09:50 +0000 (13:09 +0100)]
rust: pin-init: internal: use marker on drop guard type for pinned fields
Instead of projecting the created reference, simply create drop guards with
different marker types and have the `let_binding()` method of guards of
different marker produce different type instead.
This allows more flexible lifetime as this is now controlled by the guard.
This will be needed when implementing self-referential fields.
Gary Guo [Tue, 12 May 2026 12:09:49 +0000 (13:09 +0100)]
rust: pin-init: internal: init: handle code blocks early
`InitializerKind::Code` is a special case where it does not initialize a
field, and thus generate no guard and accessors. Handle it earlier and make
the rest of the code more linear.
Niklas Cassel [Thu, 14 May 2026 07:39:02 +0000 (09:39 +0200)]
ata: libata-scsi: do not needlessly defer commands when using PMP with FBS
The ACS specification does not allow a non-NCQ command to be issued while
an NCQ command is outstanding.
Commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
introduced a feature where a deferred non-NCQ command gets issued from a
workqueue. The design stores a single non-NCQ command per port.
However, when using Port Multipliers (PMPs), specifically PMPs that
support FIS-Based Switching (FBS), non-NCQ and NCQ commands can be mixed
on the same port, just not for the same link, see e.g. ata_std_qc_defer()
which is, and always has operated on a per-link basis.
Therefore, move the deferred_qc from struct ata_port to struct ata_link.
This way, when using a PMP with FBS, we will not needlessly defer commands
to all other links, just because one link issued a non-NCQ command while
having an NCQ command outstanding. Only commands for that specific link
will be deferred. This is in line with how PMPs with FBS worked before
commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation").
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly <linux@tkel.ly> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Niklas Cassel [Thu, 14 May 2026 07:39:01 +0000 (09:39 +0200)]
ata: libata-scsi: do not use the deferred QC feature on PMPs with CBS
When using Port Multipliers (PMPs) with Command-Based Switching (CBS), you
can only issue commands to one link at a time. For PMPs with CBS, there is
already code to handle commands being sent to different links in
sata_pmp_qc_defer_cmd_switch() using ap->excl_link. sata_sil24 also makes
use of ap->excl_link.
A user on the list reported that commit 0ea84089dbf6 ("ata: libata-scsi:
avoid Non-NCQ command starvation") broke PMPs with CBS. The commit
introduced code that stores a deferred qc in ap->deferred_qc, to later be
issued via a workqueue. It turns out that this change is incompatible with
the existing ap->excl_link handling used by PMPs with CBS.
Thus, modify sata_pmp_qc_defer_cmd_switch() and sil24_qc_defer() to return
ATA_DEFER_LINK_EXCL, and make sure that the deferred QC handling via
workqueue is not used for this return value.
This way, PMPs with CBS will work once again. Note that the starvation
referenced in commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ
command starvation") can only happen on libsas ports, and libsas does not
support Port Multipliers, thus there is no harm of reverting back to the
previous way of deferring commands for PMPs with CBS.
Non-libsas ports connected to anything but a PMP with CBS (e.g. a normal
drive or a PMP with FBS) will continue using the deferred workqueue, since
it does result in lower completion latencies for non-NCQ commands, even
though the workqueue is not strictly needed to avoid starvation for
non-libsas ports.
If we want to modify the scope of the workqueue issuing to also handle
PMPs with CBS, then we should ensure that we can save both NCQ and non-NCQ
commands in ap->deferred_qc, while also removing the existing PMP CBS
handling using ap->excl_link, such that we don't duplicate features.
While at it, also add a comment explaining how the ap->excl_link mechanism
works.
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly <linux@tkel.ly> Reported-by: Tommy Kelly <linux@tkel.ly> Closes: https://lore.kernel.org/linux-ide/ce09cc21-a8e9-4845-b205-35411e22fba9@tkel.ly/ Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Liviu Dudau [Thu, 7 May 2026 10:50:46 +0000 (11:50 +0100)]
drm/syncobj: Fix memory leak in drm_syncobj_find_fence()
Commit 18226ba52159 ("drm/syncobj: reject invalid flags in
drm_syncobj_find_fence") forgot to take into account the fact that
drm_syncobj_find() takes a reference to syncobj and returns early
without dropping the reference, leading to memory leaks.
Fixes: 18226ba52159 ("drm/syncobj: reject invalid flags in drm_syncobj_find_fence")
Reported by: Sam Spencer <sam.spencer@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Erik Kurzinger <ekurzinger@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://lore.kernel.org/all/20260507144425.2488057-1-liviu.dudau@arm.com
Niklas Cassel [Thu, 14 May 2026 07:39:00 +0000 (09:39 +0200)]
ata: libata-scsi: do not use the deferred QC feature for ATA_DEFER_PORT
The deferred QC feature was meant to handle mixed NCQ and non-NCQ commands,
i.e. for return value ATA_DEFER_LINK.
ATA_DEFER_PORT is returned by PATA drivers, but also certain SATA drivers
like sata_mv and sata_sil24 that uses ap->excl_link to workaround hardware
bugs in these HBAs. Regardless of the reason, using the deferred QC feature
for ATA_DEFER_PORT is always wrong, and will break the ap->excl_link usage
of the SATA drivers that rely on that feature.
Modify ata_scsi_qc_issue() to only use the deferred QC feature when mixing
NCQ and non-NCQ commands, i.e. ATA_DEFER_LINK.
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly <linux@tkel.ly> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
regulator: tps65219: fix irq_data.rdev not being assigned
Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:
Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork
Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.
Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing.
Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/aBDSTxALaOc-PD7X@gaggiata.pivistrello.it/ Reported-by: Francesco Dolcini <francesco@dolcini.it> Fixes: 64a6b577490c ("regulator: tps65219: Remove debugging helper function") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://patch.msgid.link/20260518083113.2063368-1-alexander.sverdlin@siemens.com Signed-off-by: Mark Brown <broonie@kernel.org>
Yabin Cui [Fri, 15 May 2026 20:08:32 +0000 (21:08 +0100)]
coresight: trbe: Save and restore state across CPU low power state
TRBE context can be lost when a CPU enters low power states. If a trace
source is restored while TRBE is not, tracing may run without an active
sink, which can lead to hangs on some devices (e.g., Pixel 9).
The save and restore flows are described in the section K5.5 "Context
switching" of Arm ARM (ARM DDI 0487 L.a). This commit adds save and
restore callbacks with following the software usages defined in the
architecture manual.
During the restore flow, since TRBLIMITR_EL1.E resets to 0 on a warm
reset, the trace buffer unit is disabled when idle resume, it is safe to
restore base/pointer/status registers first and program TRBLIMITR_EL1
last.
Signed-off-by: Yabin Cui <yabinc@google.com> Co-developed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Tested-by: James Clark <james.clark@linaro.org> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Tested-by: Jie Gan <jie.gan@oss.qualcomm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-25-f88c4a3ecfe9@arm.com
Chen-Yu Tsai [Thu, 14 May 2026 10:12:52 +0000 (18:12 +0800)]
arm64: dts: mediatek: mt8195-cherry: Sort top level nodes correctly
The thermistor device nodes were added before the vbus regulator and
reserved memory nodes, when they should be after them, based on
alphabetical order of the device node _name_.
Move them to the correct position. No functional changes intended.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Chen-Yu Tsai [Thu, 14 May 2026 10:12:50 +0000 (18:12 +0800)]
arm64: dts: mediatek: mt8192-asurada: Add (BT|WIFI)_KILL_1V8_L GPIO line names
GPIO lines 59 and 61 are named BT_KILL_1V8_L and WIFI_KILL_1V8_L in the
hardware design. Add them to the gpio-line-names property to make the
names available to users and developers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Julien Chauveau [Tue, 24 Mar 2026 19:30:11 +0000 (20:30 +0100)]
drm/bridge: it66121: acquire reset GPIO in probe
The it66121_ctx structure has a gpio_reset field, and it66121_hw_reset()
calls gpiod_set_value() on it. However, the GPIO descriptor is never
acquired via devm_gpiod_get(), leaving gpio_reset as NULL throughout
the driver lifetime.
gpiod_set_value() silently returns when passed a NULL descriptor, so
the hardware reset sequence in it66121_hw_reset() is a no-op. This
leaves the chip in an undefined state at probe time, which can prevent
it from responding on the I2C bus.
The DT binding marks reset-gpios as a required property, so all
compliant device trees provide this GPIO. Add the missing
devm_gpiod_get() call after enabling power supplies and before the
hardware reset, so the chip is properly reset with power applied.
Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Cc: stable@vger.kernel.org Signed-off-by: Julien Chauveau <chauveau.julien@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20260324193011.16583-1-chauveau.julien@gmail.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Mark Brown [Mon, 18 May 2026 09:19:53 +0000 (10:19 +0100)]
spi: switch to managed controller allocation (part 3/3)
Johan Hovold <johan@kernel.org> says:
In preparation for fixing the SPI controller API so that it no longer
drops a reference when deregistering (non-managed) controllers (cf.
[1]), this series converts drivers using managed registration to also
use managed allocation.
Included is also a related cleanup of a lp8841-rtc.
This leaves us with 18 drivers using non-managed allocation, which is
few enough to be able to fix the API in tree-wide change.
Leo Yan [Fri, 15 May 2026 20:08:31 +0000 (21:08 +0100)]
coresight: Add PM callbacks for sink device
Unlike system level sinks, per-CPU sinks may lose power during CPU idle
states. Currently, this applies specifically to TRBE. This commit
invokes save and restore callbacks for the sink in the CPU PM notifier.
If the sink provides PM callbacks but the source does not, this is
unsafe because the sink cannot be disabled safely unless the source
can also be controlled, so veto low power entry to avoid lockups.
Leo Yan [Fri, 15 May 2026 20:08:30 +0000 (21:08 +0100)]
coresight: Control path during CPU idle
Extend the CPU PM flow to control the path: disable from source up to
the node before the sink, then re-enable the same range on restore.
To avoid latency, control it up to the node before the sink.
Track per-CPU PM restore failures using percpu_pm_failed. Once a CPU
hits a restore failure, set the percpu_pm_failed and return NOTIFY_BAD
on subsequent notifications to avoid repeating half-completed
transitions.
Setting percpu_pm_failed permanently blocks CPU PM on that CPU. Such
failures are typically seen during development; disabling PM operations
simplifies the implementation, and a warning highlights the issue.
Clear this flag when the source device is unregistered.
Leo Yan [Fri, 15 May 2026 20:08:26 +0000 (21:08 +0100)]
coresight: Save active path for system tracers
This commit only set the path pointer for system tracers (e.g. STM) in
coresight_{enable|disable}_source().
Later changes will set the path pointer locally for per-CPU sources.
This is because the mode and path pointer must be set together, so that
they are observed atomically by the CPU PM notifier.
Leo Yan [Fri, 15 May 2026 20:08:23 +0000 (21:08 +0100)]
coresight: Control path with range
CPU PM notifiers need to control only part of a path instead of always
operating on the full path.
Add internal enable and disable helpers that take an inclusive node
range [from, to], validate that the requested nodes are ordered before
using them.
Update the existed coresight_{enable|disable}_path() interfaces as
full-path wrappers by passing the first and last path nodes. The helpers
coresight_path_{first|last}_node() are provided for conveniently
fetching the first and last nodes on the path.
In coresight_enable_path_from_to(), if a failure occurs at the last node
in the range, no device is actually enabled in this case, bail out
directly.
Leo Yan [Fri, 15 May 2026 20:08:22 +0000 (21:08 +0100)]
coresight: Disable source helpers in coresight_disable_path()
coresight_enable_path() enables helpers attached to every device in
the path, including those bound to the source. However,
coresight_disable_path() skips the source node, so source helpers had
to be disabled separately in coresight_disable_source().
Move source helper disabling into coresight_disable_path() instead.
Make coresight_disable_path_from() start from the passed node nd, so
it can also disable helpers on the source. Update the comments
accordingly.
As coresight_disable_path_from() now changes its semantics from
"start beyond nd" to "start from nd", update the failure handling in
coresight_enable_path(). If enabling a node fails, iterate to the
previous node (the last successfully enabled one) and pass it to
coresight_disable_path_from() for rollback.
Leo Yan [Fri, 15 May 2026 20:08:21 +0000 (21:08 +0100)]
coresight: syscfg: Use IRQ-safe spinlock to protect active variables
cscfg_config_sysfs_get_active_cfg() will be used from idle flows, while
sleeping locks are not allowed. Introduce sysfs_store_lock to replace
the mutex to protect sysfs_active_config and sysfs_active_preset
accesses, with IRQ-safe locking to avoid lockdep complaint.
Refactor cscfg_config_sysfs_activate() to use spinlock for
sysfs_active_config and activate/deactivate config.
Leo Yan [Fri, 15 May 2026 20:08:20 +0000 (21:08 +0100)]
coresight: etm4x: Remove redundant checks in PM save and restore
ETMv4 driver save/restore callbacks still re-check conditions that are
already validated by the core layer before the callbacks are invoked.
Remove the duplicated checks and fold the two-level functions into
direct callback implementations. The obsolete WARN_ON() checks are
removed as well.
Reviewed-by: Mike Leach <mike.leach@linaro.org> Tested-by: James Clark <james.clark@linaro.org> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Tested-by: Jie Gan <jie.gan@oss.qualcomm.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-13-f88c4a3ecfe9@arm.com
Leo Yan [Fri, 15 May 2026 20:08:19 +0000 (21:08 +0100)]
coresight: etm4x: Hook CPU PM callbacks
Add a helper etm4_pm_save_needed() to detect if need save context for
self-hosted PM mode and hook pm_save_disable() and pm_restore_enable()
callbacks through etm4_cs_pm_ops structure. With this, ETMv4 PM
save/restore is integrated into the core layer's CPU PM.
Organize etm4_cs_ops and etm4_cs_pm_ops together for more readable.
The CPU PM notifier in the ETMv4 driver is no longer needed, remove it
along with its registration and unregistration code.
projects / thirdparty / kernel / linux.git / log
