Input: fm801-gp - simplify initialisation of pci_device_id array
Instead of assigning the pci_device_id members using a list (which is
hard to read as you need to look at the order of the members in that
struct in parallel) use the PCI_VDEVICE() convenience macro to compact
the initialisation while improving readability.
Also drop trailing zeros that the compiler will care about then.
The change doesn't introduce binary changes to the compiled driver,
verified on both ARCH=x86 and ARCH=arm64.
Daniel Machon [Wed, 6 May 2026 07:25:39 +0000 (09:25 +0200)]
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
sparx5_port_init() only invokes sparx5_serdes_set() and the associated
shadow-device enable and low-speed device switch for SGMII and QSGMII.
On any port with a high-speed primary device (DEV5G/DEV10G/DEV25G)
configured for 1000BASE-X the serdes is therefore left uninitialized,
the DEV2G5 shadow is never enabled, and the port stays pointed at its
high-speed device rather than the DEV2G5. The PCS1G block looks
healthy in isolation, but no frames reach the link partner.
Add 1000BASE-X to the check so the same three steps run.
Note: the same issue might apply to 2500BASE-X, but that will,
eventually, be addressed in a separate commit.
The value read back from the chip is GCB_CHIP_ID_PART_ID, which is a
GENMASK(27, 12) field, i.e. at most 16 bits wide. It can never match
these IDs, so probing a TSN part fails with a "Target not supported"
error.
Fix the enum to use the actual 16-bit part IDs returned by the
hardware: 0x0546, 0x0549, 0x0552, 0x0556 and 0x0558.
Linus Torvalds [Thu, 7 May 2026 15:55:15 +0000 (08:55 -0700)]
Merge tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest"
* tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: cs35l56: Destroy workqueue in probe error path
ASoC: cs35l56: Don't use devres to unregister component
ALSA: sparc/dbri: add missing fallthrough
ALSA: core: Serialize deferred fasync state checks
ALSA: hda/realtek: Add mute LED fixup for HP Pavilion 15-cs1xxx
ALSA: seq: Fix UMP group 16 filtering
ASoC: wm_adsp_fw_find_test: Clear searched_fw_files in find-by-index test
ASoC: wm_adsp_fw_find_test: Redirect wm_adsp_release_firmware_files()
ASoC: tas2770: Deal with bogus initial temperature value
ASoC: tas2764: Deal with bogus initial temperature register value
ALSA: usb-audio: add clock quirk for Motu 1248
ALSA: usb-audio: midi2: Restart output URBs on resume
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 15-fh0xxx
ALSA: usb-audio: Add quirk flags for JBL Pebbles
ALSA: firewire-tascam: Do not drop unread control events
ALSA: usb-audio: Add quirk flags for AlphaTheta EUPHONIA
ASoC: fsl_xcvr: Fix event generation for cached controls
ASoC: sdw_utils: avoid the SDCA companion function not supported failure
ASoC: amd: yc: Add HP OMEN Gaming Laptop 16-ap0xxx product line in quirk table
ASoC: cs35l56: Fix out-of-bounds in dev_err() in cs35l56_read_onchip_spkid()
...
Peng Fan [Mon, 27 Apr 2026 01:01:48 +0000 (09:01 +0800)]
soc: imx8m: Fix match data lookup for soc device
The i.MX8M soc device is registered via platform_device_register_simple(),
so it is not associated with a Device Tree node and the imx8m_soc_driver
has no of_match_table.
As a result, device_get_match_data() always returns NULL when probing
the soc device.
Retrieve the match data directly from the machine compatible using
of_machine_get_match_data(imx8_soc_match), which provides the correct SoC
data.
Fixes: 2524b293a59e5 ("soc: imx8m: don't access of_root directly") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Linus Torvalds [Thu, 7 May 2026 15:43:25 +0000 (08:43 -0700)]
Merge tag 'pmdomain-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- Fix detach procedure for virtual devices in genpd
- mediatek: Fix use-after-free in scpsys_get_bus_protection_legacy()
* tag 'pmdomain-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: fix use-after-free in scpsys_get_bus_protection_legacy()
pmdomain: core: Fix detach procedure for virtual devices in genpd
Joey Lu [Wed, 6 May 2026 08:46:13 +0000 (16:46 +0800)]
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
priv->dev was never initialized after devm_kzalloc() allocates the
private data structure. When nvt_set_phy_intf_sel() is later invoked
via the phylink interface_select callback, it calls
nvt_gmac_get_delay(priv->dev, ...) which dereferences the NULL pointer.
Fix this by assigning priv->dev = dev immediately after allocation.
If a socket is bound to a wildcard address, tcp_v[46]_connect()
updates it with a non-wildcard address based on the route lookup.
After bhash2 was introduced in the cited commit, we must call
inet_bhash2_update_saddr() to update the bhash2 entry as well.
If inet_bhash2_update_saddr() fails, we must release the refcount
for dst by ip_route_connect() or ip6_dst_lookup_flow().
While tcp_v4_connect() calls ip_rt_put() in the error path,
tcp_v6_connect() does not call dst_release().
Let's call dst_release() when inet_bhash2_update_saddr() fails
in tcp_v6_connect().
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: Damiano Melotti <melotti@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260506070443.1699879-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Chen [Tue, 5 May 2026 17:39:26 +0000 (10:39 -0700)]
net: phy: broadcom: Save PHY counters during suspend
The PHY counters can be lost if the PHY is reset during suspend. We
need to save the values into the shadow counters or the accounting
will be incorrect over multiple suspend and resume cycles.
Fixes: 820ee17b8d3b ("net: phy: broadcom: Add support code for reading PHY counters") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20260505173926.2870069-1-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
D. Wythe [Wed, 6 May 2026 01:41:05 +0000 (09:41 +0800)]
net/smc: fix missing sk_err when TCP handshake fails
In smc_connect_work(), when the underlying TCP handshake fails, the error
code (rc) must be propagated to sk_err to ensure userspace can correctly
retrieve the error status via SO_ERROR. Currently, the code only handles
a restricted set of error codes (e.g., EPIPE, ECONNREFUSED). If other
errors occurs, such as EHOSTUNREACH, sk_err remains unset (zero).
This affects applications that rely on SO_ERROR to determine connect
outcome. For example, higher versions of Go's netpoller treats
SO_ERROR == 0 combined with a failed getpeername() as a spurious wakeup
and re-enters epoll_wait(). Under ET mode, no further edge will be
generated since the socket is already in a terminal state, causing the
connect to hang indefinitely or until a user-specified timeout, if one
is set.
Jiexun Wang [Wed, 6 May 2026 14:08:23 +0000 (22:08 +0800)]
af_unix: Reject SIOCATMARK on non-stream sockets
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue.
Fixes: 314001f0bf92 ("af_unix: Add OOB support") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Suggested-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shuhao Fu [Tue, 28 Apr 2026 08:12:38 +0000 (16:12 +0800)]
ALSA: hda: cs35l41: Put ACPI device on missing physical node
acpi_dev_get_first_match_dev() returns a refcounted ACPI device and
callers must balance it with acpi_dev_put().
cs35l41_hda_read_acpi() stores the returned ACPI device in
cs35l41->dacpi. That reference is normally released by the later
probe cleanup or the remove path, but the NULL-check on
physdev exits before either of those paths can run.
Drop the lookup reference before returning -ENODEV.
Fixes: c34b04cc6178 ("ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()") Signed-off-by: Shuhao Fu <sfual@cse.ust.hk> Tested-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260428081238.GA1659932@chcpu16
Shuhao Fu [Tue, 28 Apr 2026 08:01:39 +0000 (16:01 +0800)]
ALSA: hda: cs35l56: Put ACPI device after setting companion
acpi_dev_get_first_match_dev() returns a refcounted ACPI device and
callers are expected to balance it with acpi_dev_put().
When no companion is already attached, cs35l56_hda_read_acpi() looks
up an ACPI device and sets it with ACPI_COMPANION_SET(), but leaves
the lookup reference held.
ACPI_COMPANION_SET() does not take ownership of that reference, so
drop it with acpi_dev_put() after attaching the companion.
Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Signed-off-by: Shuhao Fu <sfual@cse.ust.hk> Tested-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260428080139.GA1649104@chcpu16
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
XDP redirect into a veth device (via bpf_redirect()) calls
veth_xdp_xmit(), which enqueues frames into the peer's ptr_ring using
smp_processor_id() % peer->real_num_rx_queues
as the ring index. With an asymmetric veth pair where the peer has
fewer TX queues than RX queues, that index can exceed
peer->real_num_tx_queues.
veth_poll() then resolves peer_txq for the ring via:
where queue_idx = rq->xdp_rxq.queue_index. When queue_idx exceeds
peer_dev->real_num_tx_queues this is an out-of-bounds (OOB) access
into the peer's netdev_queue array, triggering DEBUG_NET_WARN_ON_ONCE
in netdev_get_tx_queue().
The normal ndo_start_xmit path is not affected: the stack clamps
skb->queue_mapping via netdev_cap_txqueue() before invoking
ndo_start_xmit, so rxq in veth_xmit() never exceeds real_num_tx_queues.
Fix veth_poll() by clamping: only dereference peer_txq when queue_idx is
within bounds, otherwise set it to NULL. The out-of-range rings are fed
exclusively via XDP redirect (veth_xdp_xmit), never via ndo_start_xmit
(veth_xmit), so the peer txq was never stopped and there is nothing to
wake; NULL is the correct fallback.
Reported-by: Sashiko <sashiko-bot@kernel.org> Closes: https://lore.kernel.org/all/20260502071828.616C3C19425@smtp.kernel.org/ Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://patch.msgid.link/20260505132159.241305-2-hawk@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drm/panfrost: Fix wait_bo ioctl leaking positive return from dma_resv_wait_timeout()
dma_resv_wait_timeout() returns a positive 'remaining jiffies' value
on success, 0 on timeout, and -errno on failure.
panfrost_ioctl_wait_bo() returns this 'long' result from an int-typed
ioctl handler, so positive values reach userspace as bogus errors.
Explicitly set ret to 0 on the success path.
accel/rocket: Fix prep_bo ioctl leaking positive return from dma_resv_wait_timeout()
dma_resv_wait_timeout() returns a positive 'remaining jiffies' value
on success, 0 on timeout, and -errno on failure.
rocket_ioctl_prep_bo() returns this 'long' result from an int-typed
ioctl handler, so positive values reach userspace as bogus errors.
Explicitly set ret to 0 on the success path.
Fuad Tabba [Fri, 1 May 2026 11:21:49 +0000 (12:21 +0100)]
KVM: arm64: Pre-check vcpu memcache for host->guest donate
__pkvm_host_donate_guest() flips the host stage-2 PTE for the
donated page to a non-valid annotation via
host_stage2_set_owner_metadata_locked() and then calls
kvm_pgtable_stage2_map() to install the matching guest stage-2
mapping. The map's return value is wrapped in WARN_ON() and
otherwise discarded, asserting that the call cannot fail.
WARN_ON() at nVHE EL2 panics, so this assertion is only correct
if the call genuinely cannot fail. kvm_pgtable_stage2_map() can
fail with -ENOMEM even at PAGE_SIZE granularity: the donate path
verifies PKVM_NOPAGE for the guest IPA before the map, so the
walker must allocate fresh page-table pages from the vcpu
memcache, and the host controls the vcpu memcache via the topup
interface. An under-provisioned donation request would otherwise
turn a recoverable -ENOMEM into a fatal hyp panic.
Bound the worst-case walker allocation alongside the existing
__host_check_page_state_range() / __guest_check_page_state_range()
pre-checks, using the helper introduced for host->guest share. If
the vcpu memcache holds fewer pages than kvm_mmu_cache_min_pages(),
return -ENOMEM before any state mutation.
Fuad Tabba [Fri, 1 May 2026 11:21:48 +0000 (12:21 +0100)]
KVM: arm64: Pre-check vcpu memcache for host->guest share
__pkvm_host_share_guest() ends with kvm_pgtable_stage2_map() to
install the guest stage-2 mapping, after a forward pass that mutates
the host vmemmap (sets PKVM_PAGE_SHARED_OWNED and increments
host_share_guest_count) for every page in the range. The map's
return value is wrapped in WARN_ON() and otherwise discarded,
asserting that the call cannot fail.
WARN_ON() at nVHE EL2 panics, so this assertion is only correct if
the call genuinely cannot fail. kvm_pgtable_stage2_map() can fail
with -ENOMEM when the stage-2 walker exhausts the caller's
memcache, and the host controls the vcpu memcache via the topup
interface, so an under-provisioned share request would otherwise
turn a recoverable -ENOMEM into a fatal hyp panic.
Bound the worst-case walker allocation in the existing pre-check
pass so that kvm_pgtable_stage2_map() cannot fail at the call
site, using kvm_mmu_cache_min_pages() -- the same bound host EL1
uses for its own stage-2 maps. If the vcpu memcache holds fewer
pages, return -ENOMEM before any state mutation.
The hypercall handlers call pkvm_refill_memcache() to top up the
hyp_vcpu memcache before invoking __pkvm_host_{share,donate}_guest().
pkvm_ownership_selftest invokes those functions directly with a
static selftest_vcpu that has an empty memcache.
Seed selftest_vcpu's memcache from the prepopulated selftest
pages, leaving the remainder for selftest_vm.pool. Required by
the memcache-sufficiency pre-check added in the following
patches.
__deactivate_fgt() declares its first parameter as "htcxt" but the body
references "hctxt". The parameter is unused; the macro silently captures
"hctxt" from the enclosing scope. Both existing callers
(__deactivate_traps_hfgxtr() and __deactivate_traps_ich_hfgxtr()) happen
to define a local "struct kvm_cpu_context *hctxt", so the macro works
by coincidence.
A future caller without an "hctxt" local in scope, or naming it
differently, would compile but bind to the wrong context. Align the
parameter name with the sibling __activate_fgt() macro.
The "vcpu" parameter remains unused in the body, kept for API symmetry
with __activate_fgt() (which uses it).
Fuad Tabba [Fri, 1 May 2026 11:21:45 +0000 (12:21 +0100)]
KVM: arm64: Guard against NULL vcpu on VHE hyp panic path
On VHE, __hyp_call_panic() unconditionally calls __deactivate_traps(vcpu)
on the vcpu pointer read from host_ctxt->__hyp_running_vcpu. That pointer
is cleared after every guest exit (and is never set when no guest is
running), so an unexpected EL2 exception landing in _guest_exit_panic,
e.g. via the el2t*_invalid / el2h_irq_invalid vectors - reaches this
function with vcpu == NULL. __deactivate_traps() then dereferences vcpu
via ___deactivate_traps() -> vserror_state_is_nested() -> vcpu_has_nv()
-> vcpu->arch.features, faulting inside the panic handler and obscuring
the original failure.
The nVHE counterpart (hyp_panic() in arch/arm64/kvm/hyp/nvhe/switch.c)
already guards its vcpu-using cleanup with "if (vcpu)"; mirror that
here. sysreg_restore_host_state_vhe() does not depend on vcpu and
continues to run unconditionally, preserving panic forensics. The
trailing panic("...VCPU:%p", vcpu) prints "(null)" safely via printk's
%p handling.
Fuad Tabba [Fri, 1 May 2026 11:21:44 +0000 (12:21 +0100)]
KVM: arm64: Make EL2 exception entry and exit context-synchronization events
SCTLR_EL2.EIS and SCTLR_EL2.EOS control whether exception entry and
exit at EL2 are Context Synchronisation Events (CSEs). Per ARM DDI
0487 M.b D24.2.175 (p. D24-9754):
- !FEAT_ExS: the bit is RES1, so the entry/exit is unconditionally
a CSE.
- FEAT_ExS: the reset value is architecturally UNKNOWN; software
must set the bit to make the entry/exit a CSE.
INIT_SCTLR_EL2_MMU_ON in arch/arm64/include/asm/sysreg.h sets neither
bit. KVM/arm64 hot paths rely on ERET from EL2 being a CSE, and on
synchronous EL1->EL2 entry being a CSE, to elide explicit ISBs after
MSRs to context-switching system registers (HCR_EL2, ZCR_EL2,
ptrauth keys, etc.). On FEAT_ExS hardware those reliances are not
architecturally backed unless EOS=1 (and, for entry, EIS=1).
Until commit 0a35bd285f43 ("arm64: Convert SCTLR_EL2 to sysreg
infrastructure"), SCTLR_EL2_RES1 was a hand-rolled mask that
included BIT(11) (EOS) and BIT(22) (EIS), so INIT_SCTLR_EL2_MMU_ON
was setting both unconditionally. The conversion made
SCTLR_EL2_RES1 auto-generated; because the sysreg tooling only
models unconditionally-RES1 fields and EIS/EOS are RES1 only when
FEAT_ExS is absent, the auto-generated mask is UL(0). The seven
other bits dropped from the old mask (positions 4, 5, 16, 18, 23,
28, 29) are unconditionally RES1 in the E2H=0 SCTLR_EL2 layout per
DDI 0487 M.b D24.2.175, so dropping them is harmless. EIS and EOS
are the only bits whose semantics changed for FEAT_ExS hardware
and where the kernel relies on the value being 1.
Make the guarantee explicit: include SCTLR_ELx_EIS | SCTLR_ELx_EOS in
INIT_SCTLR_EL2_MMU_ON so that EL2 exception entry and exit are
unconditionally CSEs regardless of whether FEAT_ExS is implemented.
This matches the pairing in arch/arm64/kvm/config.c which treats EIS
and EOS together as RES1 under !FEAT_ExS.
Fixes: 0a35bd285f43 ("arm64: Convert SCTLR_EL2 to sysreg infrastructure") Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com> Assisted-by: Gemini:gemini-3.1-pro review-prompts Signed-off-by: Fuad Tabba <tabba@google.com> Link: https://patch.msgid.link/20260501112149.2824881-2-tabba@google.com Signed-off-by: Marc Zyngier <maz@kernel.org>
This is caused by accessing plr->dbgfs_dir after vsec_tpmi driver is
removed. Here vsec_tpmi driver is the parent. On unbind, the parent
device remove callback is called first which here will remove debugfs
interface. Hence plr->dbgfs_dir is no longer valid.
Register notifier for TPMI_CORE_EXIT and make this pointer to NULL,
so that debugfs_remove_recursive() is not called with bad plr->dbgfs_dir
pointer.
After notifier is returned the vsec_tpmi driver will call remove debugfs
by calling debugfs_remove_recursive().
Fixes: 811f67c51636 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stable@vger.kernel.org Link: https://patch.msgid.link/20260430151103.1549733-4-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In some cases a driver using services of vsec_tpmi driver requires some
processing before vsec_tpmi exits. For example a children using debugfs
can't use debugfs as this will be deleted by the vsec_tpmi driver.
This is the case when unbind using PCI driver interface. In this case
the remove callback of vsec_tpmi driver is called first, then remove
callback of its children.
Add support of blocking chain notifiers support. Notify on successful probe
and before clean up in the remove callback.
Fixes: 811f67c51636 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stable@vger.kernel.org Link: https://patch.msgid.link/20260430151103.1549733-3-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: intel: Move debugfs register before creating devices
It is possible that the driver handling device is enumerated before
registering debugfs. If the driver wants to access debugfs by calling
tpmi_get_debugfs_dir(), this will return error in this case.
Hence register debugfs before creating devices.
Fixes: 811f67c51636 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stable@vger.kernel.org Link: https://patch.msgid.link/20260430151103.1549733-2-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Konrad Dybcio [Wed, 31 Dec 2025 16:21:26 +0000 (21:51 +0530)]
firmware: psci: Set pm_set_resume/suspend_via_firmware() for SYSTEM_SUSPEND
PSCI specification defines the SYSTEM_SUSPEND feature which enables the
firmware to implement the suspend to RAM (S2RAM) functionality by
transitioning the system to a deeper low power state. When the system
enters such state, the power to the peripheral devices might be removed. So
the respective device drivers must prepare for the possible removal of the
power by performing actions such as shutting down or resetting the device
in their system suspend callbacks.
The Linux PM framework allows the platform drivers to convey this info to
device drivers by calling the pm_set_suspend_via_firmware() and
pm_set_resume_via_firmware() APIs.
Hence, if the PSCI firmware supports SYSTEM_SUSPEND feature, call the above
mentioned APIs in the psci_system_suspend_begin() and
psci_system_suspend_enter() callbacks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
[mani: reworded the description to be more elaborative] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 7 May 2026 12:06:53 +0000 (14:06 +0200)]
Merge tag 'ffa-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v7.1
The updates fix several robustness issues in the FF-A bus and core driver,
mostly around notification handling, RxTx buffer sizing, firmware-provided
bounds, and cleanup paths.
The notification fixes make per-CPU notification work truly per-CPU, avoid
running per-vCPU notification handling from IPI context, keep RX buffer
release serialized under rx_lock, validate framework notification payload
layout before copying from the shared RX buffer, and avoid dereferencing
notifier entries after they may have been unregistered.
The remaining fixes reject FF-A drivers without an ID table at registration
time, avoid freeing an unallocated RX buffer after allocation failure,
unregister the FF-A v1.0 bus notifier on teardown, bound register-based
PARTITION_INFO_GET descriptor copies, align the stored RxTx buffer size with
the size mapped to firmware, and fix sched-recv callback partition lookup on
the circular partition list.
* tag 'ffa-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix sched-recv callback partition lookup
firmware: arm_ffa: Snapshot notifier callbacks under lock
firmware: arm_ffa: Align RxTx buffer size before mapping
firmware: arm_ffa: Validate framework notification message layout
firmware: arm_ffa: Keep framework RX release under lock
firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies
firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0
firmware: arm_ffa: Fix per-vcpu self notifications handling in workqueue
firmware: arm_ffa: Avoid collapsing NPI work from different CPUs
firmware: arm_ffa: Skip free_pages on RX buffer alloc failure
firmware: arm_ffa: Check for NULL FF-A ID table while driver registration
ARM: realtek: MAINTAINERS: Include pin controller drivers
No dedicated maintainers are shown for Realtek SoC pin controllers,
except pinctrl subsystem maintainer, which means reduced review and
impression of abandoned drivers. Pin controller drivers are essential
part of an SoC, so in case of lack of dedicated entry at least cover it
by the SoC platform maintainers.
Acked-by: Yu-Chun Lin <eleanor.lin@realtek.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com> Link: https://lore.kernel.org/r/20260505105838.1014771-2-eleanor.lin@realtek.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Guenter Roeck [Tue, 5 May 2026 19:15:37 +0000 (21:15 +0200)]
ARM: integrator: Fix early initialization
Starting with commit bdb249fce9ad4 ("ARM: integrator: read counter using
syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible
which in turn calls of_syscon_register. This function allocates memory.
Since the memory management code has not been initialized at that time,
the call always fails. It either returns -ENOMEM or crashes as follows.
Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read
[0000000c] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPT
Hardware name: ARM Integrator/CP (Device Tree)
PC is at __kmalloc_cache_noprof+0xec/0x39c
LR is at __kmalloc_cache_noprof+0x34/0x39c
...
Call trace:
__kmalloc_cache_noprof from of_syscon_register+0x7c/0x310
of_syscon_register from device_node_get_regmap+0xa4/0xb0
device_node_get_regmap from intcp_init_early+0xc/0x40
intcp_init_early from start_kernel+0x60/0x688
start_kernel from 0x0
The crash is seen due to a dereferenced pointer which is not supposed to be
NULL but is NULL if the memory management subsystem has not been
initialized. The crash is not seen with all versions of gcc. Some versions
such as gcc 9.x apparently do not dereference the pointer, presumably if
tracing is disabled. The problem has been reproduced with gcc 10.x, 11.x,
and 13.x. Either case, if the crash is not seen, the call to
syscon_regmap_lookup_by_compatible returns -ENOMEM, and
sched_clock_register is never called.
Fix the problem by moving the early initialization code into the standard
machine initialization code.
Arnd Bergmann [Thu, 7 May 2026 12:00:11 +0000 (14:00 +0200)]
Merge tag 'renesas-fixes-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v7.1
- Fix SCIF (serial port) clocks on R-Car X5H,
- Fix various dtc and dtbs_check warnings.
* tag 'renesas-fixes-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r9a09g056: Add #mux-state-cells to usb20phyrst
arm64: dts: renesas: r9a09g057: Add #mux-state-cells to usb2{0,1}phyrst
ARM: dts: renesas: rskrza1: Drop superfluous cells
ARM: dts: renesas: genmai: Drop superfluous cells
ARM: dts: renesas: r7s72100: Add missing unit address to bus node
ARM: dts: renesas: r8a7792: Add missing unit address to bus node
ARM: dts: renesas: r8a7779: Add missing unit address to bus node
ARM: dts: renesas: r8a7778: Add missing unit address to bus node
arm64: dts: renesas: rz-smarc-du-adv7513-smarc: Fix missing cells and reg in DU subnode
arm64: dts: renesas: rz-smarc-cru-csi-ov5645: Fix missing cells and reg in CSI2 subnode
arm64: dts: renesas: salvator-panel: Fix missing cells and reg in DTO
arm64: dts: renesas: draak/ebisu-panel: Fix missing cells and reg in DTO
arm64: dts: renesas: r8a78000: Fix SCIF brg_int clocks
On Samsung Galaxy Book 5 (SAM0430), the keyboard backlight, microphone
mute, and camera block hotkeys do not generate i8042 scancodes.
Instead they arrive as ACPI notifications 0x7d, 0x6e, and 0x6f
respectively, all of which previously fell through to the default
"unknown" warning in galaxybook_acpi_notify().
Add handling for these three events:
- 0x7d (Fn+F9, keyboard backlight): schedule the existing
kbd_backlight_hotkey_work which cycles brightness.
- 0x6e (Fn+F10, microphone mute): emit KEY_MICMUTE via the driver's
input device.
- 0x6f (Fn+F11, camera block): if block_recording is active use the
existing block_recording_hotkey_work; otherwise emit a toggle of
SW_CAMERA_LENS_COVER via the driver's input device on models where
the block_recording ACPI feature is not supported.
Tested on Samsung Galaxy Book 5 (SAM0430) and Samsung Galaxy Book2 Pro
(SAM0429).
Signed-off-by: Ayaan Mirza Baig <ayaanmirzabaig85@gmail.com> Co-developed-by: Joshua Grisham <josh@joshuagrisham.com> Signed-off-by: Joshua Grisham <josh@joshuagrisham.com> Link: https://patch.msgid.link/20260418004613.93981-3-ayaanmirzabaig85@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: samsung-galaxybook: Refactor camera lens cover input device
Rename the camera_lens_cover_switch input device to a generic input
device which can be used for multiple input events. Move input device
allocation and registration into a dedicated galaxybook_input_init()
helper which is called early in probe so that the device is available
to all features.
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras.
snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint
descriptor size before using baAssocJackID[], but the descriptor walker can
still return a class-specific endpoint descriptor whose bLength exceeds the
remaining bytes in the endpoint-extra scan.
That leaves later flexible-array reads bounded by bLength, but not by the
remaining bytes in the endpoint-extra scan.
Stop walking when bLength is zero or
extends past the remaining endpoint-extra scan.
Rámon van Raaij [Wed, 6 May 2026 18:31:18 +0000 (20:31 +0200)]
ALSA: hda/realtek: Add codec SSID quirk for Lenovo Yoga Pro 9 16IMH9 (17aa:38d5)
Some Lenovo Yoga Pro 9 16IMH9 units carry codec SSID 17aa:38d5 instead
of 17aa:38d6, which was added in commit 56722cfbb78d ("ALSA: hda/realtek:
Add codec SSID quirk for Lenovo Yoga Pro 9 16IMH9"). The corresponding
firmware blob TAS2XXX38D5.bin already ships in linux-firmware, and the
hardware is otherwise identical: same PCI subsystem ID 17aa:3811 shared
with the Legion S7 15IMH05, same TI TAS2781 amplifiers behind ACPI HID
TIAS2781, same ALC287_FIXUP_TAS2781_I2C requirement.
Add a second HDA_CODEC_QUIRK entry directly above the existing 17aa:38d6
entry so both variants resolve to the correct fixup. Reported and
verified on hardware by GitHub user 0xEthamin.
Ashutosh Desai [Tue, 5 May 2026 17:07:12 +0000 (17:07 +0000)]
nfc: hci: fix out-of-bounds read in HCP header parsing
Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read
packet->header from skb->data at function entry without first checking
that the buffer holds at least one byte. A malicious NFC peer can send
a 0-byte HCP frame that passes through the SHDLC layer and reaches
these functions, causing an out-of-bounds heap read of packet->header.
The same 0-byte frame, if queued as a non-final fragment, also causes
the reassembly loop to underflow msg_len to UINT_MAX, triggering
skb_over_panic() when the reassembled skb is written.
Fix this by adding a pskb_may_pull() check at the entry of each
function before packet->header is first accessed. The existing
pskb_may_pull() checks before the reassembled hcp_skb is cast to
struct hcp_packet remain in place to guard the 2-byte HCP message
header.
Bobby Eshleman [Tue, 5 May 2026 01:42:11 +0000 (18:42 -0700)]
eth: fbnic: fix double-free of PCS on phylink creation failure
fbnic_phylink_create() stores the newly allocated PCS in fbn->pcs and
then calls phylink_create(). When phylink_create() fails, the error path
correctly destroys the PCS via xpcs_destroy_pcs(), but the caller,
fbnic_netdev_alloc(), responds by invoking fbnic_netdev_free() which
calls fbnic_phylink_destroy(). That function finds fbn->pcs non-NULL and
calls xpcs_destroy_pcs() a second time on the already-freed object,
triggering a refcount underflow use-after-free:
Instead of calling fbnic_phylink_destroy(), the prior initialization of
netdev should just be unrolled with free_netdev() and clearing
fbd->netdev.
Clearing fbd->netdev to NULL avoids UAF in init_failure_mode where
callers guard by checking !fbd->netdev, such as fbnic_mdio_read_pmd().
These callers remain active even after a failed probe, so fdb->netdev
still needs to be cleared.
Weiming Shi [Tue, 5 May 2026 17:55:11 +0000 (01:55 +0800)]
i2c: smbus: reject oversized block transfers in the common path
The SMBus block transfer length data->block[0] is validated in
i2c_smbus_xfer_emulated() but that check runs too late for tracepoints
and is skipped entirely when the adapter provides a native smbus_xfer
implementation. This allows user-controlled oversized block lengths to
reach tracepoint memcpy calls and driver callbacks unchecked.
Add an early validation in __i2c_smbus_xfer() that rejects block
transfers whose caller-supplied length is zero or exceeds
I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback
runs. data->block[0] is filled in by the device on SMBus block reads,
so the check is scoped to operations where the length is actually
supplied by the caller. This is consistent with the existing -EINVAL
convention in the emulated path and protects all downstream consumers
at once: the smbus_write tracepoint, all native smbus_xfer driver
implementations, and the emulated path.
Two distinct bugs are fixed by this change:
Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h)
trace_smbus_write() fires before any validation and copies
data->block[0]+1 bytes into a 34-byte event buffer. With
block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221.
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530
Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91
Call Trace:
<TASK>
__asan_memcpy+0x23/0x80
trace_event_raw_event_smbus_write+0x27c/0x530
__i2c_smbus_xfer+0x43a/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c)
stub_xfer() implements .smbus_xfer directly and only clamps
block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With
block[0]=0xff and command=0 the loop accesses block[1+i] for
i up to 254, far past the 34-byte union.
UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44
index 34 is out of range for type '__u8 [34]'
Call Trace:
<TASK>
__ubsan_handle_out_of_bounds+0xd7/0x120
stub_xfer+0x1971/0x198f [i2c_stub]
__i2c_smbus_xfer+0x306/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN.
Fixes: 8a325997d95d ("i2c: Add message transfer tracepoints for SMBUS [ver #2]") Fixes: 4710317891e4 ("i2c-stub: Implement I2C block support") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Myeonghun Pak [Fri, 24 Apr 2026 12:34:28 +0000 (21:34 +0900)]
drm/bochs: Drop manual put on probe error path
bochs_pci_probe() allocates the DRM device with devm_drm_dev_alloc(),
which registers a devres action to drop the initial DRM device reference
on driver detach or probe failure.
The error path currently calls drm_dev_put() manually. If probe then
returns an error, devres will run the registered release action and put
the same device again, after the first put may already have released it.
Return the probe error directly and let devres own the final put.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Fixes: 04826f588682 ("drm/bochs: Allocate DRM device in struct bochs_device") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260424123506.32275-1-mhun512@gmail.com
David Gow [Thu, 16 Apr 2026 06:57:43 +0000 (14:57 +0800)]
x86/boot/e820: Re-enable BIOS fallback if e820 table is empty
In commit:
157266edcc56 ("x86/boot/e820: Simplify append_e820_table() and remove restriction on single-entry tables")
the check on the number of entries in the e820 table was removed. The intention
was to support single-entry maps, but by removing the check entirely, we also
skip the fallback (to, e.g., the BIOS 88h function).
This means that if no E820 map is passed in from the bootloader (which is the
case on some bootloaders, like linld), we end up with an empty memory map, and
the kernel fails to boot (either by deadlocking on OOM, or by failing to
allocate the real mode trampoline, or similar).
Re-instate the check in append_e820_table(), but only check that nr_entries is
non-zero. This allows e820__memory_setup_default() to fall back to other memory
size sources, and doesn't affect e820__memory_setup_extended(), as the latter
ignores the return value from append_e820_table().
In doing so, we also update the return values to be proper error codes, with
-ENOENT for this case (there are no entries), and -EINVAL for the case where an
entry appears invalid. Given none of the callers check the actual value -- just
whether it's nonzero -- this is largely aesthetic in practice.
Tested against linld, and the kernel boots again fine.
[ mingo: Readability edits to the comment and the changelog. ]
Fixes: 157266edcc56 ("x86/boot/e820: Simplify append_e820_table() and remove restriction on single-entry tables") Signed-off-by: David Gow <david@davidgow.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://patch.msgid.link/20260416065746.1896647-1-david@davidgow.net
Maoyi Xie [Mon, 4 May 2026 14:27:36 +0000 (22:27 +0800)]
xfrm: route MIGRATE notifications to caller's netns
xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate()
in net/key/af_key.c both hardcode &init_net for the multicast that
announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE.
XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the
rest of the xfrm/af_key netlink path was made netns-aware in 2008.
The other 14 multicast paths in xfrm_user.c route their event using
xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path
was missed.
Two consequences of the init_net hardcoding:
1. The notification (selector, old/new endpoint addresses, and the
km_address) is delivered to listeners on init_net's
XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on
the issuing netns. An IKE daemon running in init_net therefore
receives migration notifications originating from any other
netns on the host.
2. An IKE daemon running inside a non-init netns and subscribed
to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the
notification of its own migration. IKEv2 MOBIKE / address-update
handling inside a netns is silently broken.
Thread struct net through km_migrate() and the xfrm_mgr.migrate
function pointer, drop the &init_net override in xfrm_send_migrate()
and pfkey_send_migrate(), and pass the caller's net (already in
scope in xfrm_migrate() via sock_net(skb->sk)) all the way down.
struct xfrm_mgr is in-tree only and not exported as a stable API,
so the function-pointer signature change is internal.
pfkey_broadcast() is already netns-aware via net_generic(net,
pfkey_net_id) since the pernet conversion. The five other
pfkey_broadcast() callers in af_key.c already pass xs_net(x),
sock_net(sk) or a per-netns net, so this only removes the
&init_net outlier.
Fixes: 5c79de6e79cd ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Linus Torvalds [Thu, 7 May 2026 05:02:28 +0000 (22:02 -0700)]
Merge tag 'v7.1-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix memory leak in connection free
- Fix inherited ACL ACE validation
- Minor cleanup
- Fix for share config
- Fix durable handle cleanup race
- Fix close_file_table_ids in session teardown
- smbdirect fixes:
- Fix memory region registration
- Two fixes for out-of-tree builds
* tag 'v7.1-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate inherited ACE SID length
ksmbd: fix kernel-doc warnings from ksmbd_conn_get/put()
ksmbd: fail share config requests when path allocation fails
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd: harden file lifetime during session teardown
ksmbd: centralize ksmbd_conn final release to plug transport leak
smb: smbdirect: fix MR registration for coalesced SG lists
smb: smbdirect: introduce and use include/linux/smbdirect.h
smb: smbdirect: make use of DEFAULT_SYMBOL_NAMESPACE and EXPORT_SYMBOL_GPL
Linus Torvalds [Thu, 7 May 2026 03:44:03 +0000 (20:44 -0700)]
Merge tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform fix from Tzung-Bi Shih:
- Fix a NULL dereference in cros_ec_typec
* tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
In gmac_rx() (drivers/net/ethernet/cortina/gemini.c), when
gmac_get_queue_page() returns NULL for the second page of a multi-page
fragment, the driver logs an error and continues — but does not free the
partially assembled skb that was being assembled via napi_build_skb() /
napi_get_frags().
Free the in-progress partially assembled skb via napi_free_frags()
and increase the number of dropped frames appropriately
and assign the skb pointer NULL to make sure it is not lingering
around, matching the pattern already used elsewhere in the driver.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Andreas Haarmann-Thiemann <eitschman@nebelreich.de> Signed-off-by: Linus Walleij <linusw@kernel.org> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20260505-gemini-ethernet-fix-v2-1-997c31d06079@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of
'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only
been added to 'pm_nl_ctl' for this specific check: to ensure that the
kernel ignores such unsupported flag.
No reason to add this flag to 'ip mptcp'. Then, this check should be
skipped when 'ip mptcp' is used.
Using '${?}' inside the if-statement to check the returned value from
the command that was evaluated as part of the if-statement is not
correct: here, '${?}' will be linked to the previous instruction, not
the one that is expected here (${cmd}).
Instead, simply mark the error, except if an error is expected. If
that's the case, 1 can be passed as the 4th argument of this helper.
Three checks from pm_netlink.sh expect an error.
While at it, improve the error message when the command unexpectedly
fails or succeeds.
Note that we could expect a specific returned value, but the checks
currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl',
and these two tools don't return the same error code.
When looking at the maximum RTO amongst the subflows, inactive subflows
were taken into account: that includes stale ones, and the initial one
if it has been already been closed.
Unusable subflows are now simply skipped. Stale ones are used as an
alternative: if there are only stale ones, to take their maximum RTO and
avoid to eventually fallback to net.mptcp.add_addr_timeout, which is set
to 2 minutes by default.
Fixes: 30549eebc4d8 ("mptcp: make ADD_ADDR retransmission timeout adaptive") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-7-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR needs to be retransmitted and another one has already
been prepared -- e.g. multiple ADD_ADDRs have been sent in a row and
need to be retransmitted later -- this additional retransmission will
need to wait.
In this case, the timer was reset to TCP_RTO_MAX / 8, which is ~15
seconds. This delay is unnecessary long: it should just be rescheduled
at the next opportunity, e.g. after the retransmission timeout.
Without this modification, some issues can be seen from time to time in
the selftests when multiple ADD_ADDRs are sent, and the host takes time
to process them, e.g. the "signal addresses, ADD_ADDR timeout" MPTCP
Join selftest, especially with a debug kernel config.
Note that on older kernels, 'timeout' is not available. It should be
enough to replace it by one second (HZ).
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.
If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().
But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself".
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely".
This mptcp_pm_add_timer() helper is executed as a timer callback in
softirq context. To avoid any data races, the socket lock needs to be
held with bh_lock_sock().
If the socket is in use, retry again soon after, similar to what is done
with the keepalive timer.
ADD_ADDR can be sent for the ID 0, which corresponds to the local
address and port linked to the initial subflow.
Indeed, this address could be removed, and re-added later on, e.g. what
is done in the "delete re-add signal" MPTCP Join selftests. So no reason
to ignore it.
mptcp: pm: kernel: correctly retransmit ADD_ADDR ID 0
When adding the ADD_ADDR to the list, the address including the IP, port
and ID are copied. On the other hand, when the endpoint corresponds to
the one from the initial subflow, the ID is set to 0, as specified by
the MPTCP protocol.
The issue is that the ID was reset after having copied the ID in the
ADD_ADDR entry. So the retransmission was done, but using a different ID
than the initial one.
Eric Dumazet [Tue, 5 May 2026 13:32:33 +0000 (13:32 +0000)]
inetpeer: add a missing read_seqretry() in inet_getpeer()
When performing a lockless lookup over the inet_peer rbtree,
if a matching node is found, inet_getpeer() returns it immediately
without validating the seqlock sequence.
This missing check introduces a race condition:
Trigger Path: When a host receives an incoming fragmented IPv4 packet,
ip4_frag_init() (in net/ipv4/ip_fragment.c) calls inet_getpeer_v4()
to track the peer.
The Race: If the packet is from a new source IP, CPU A acquires the
write_seqlock, allocates a new inet_peer node (p), sets its IP address
(daddr), and links it to the rbtree (rb_link_node).
Uninitialized Access: Due to the lack of memory barriers between
rb_link_node and the initialization of the rest of the struct
(like refcount_set(&p->refcnt, 1)), CPU A can make the node visible
to readers before its refcnt is initialized.
This is especially true on weakly-ordered architectures like ARM64
where the CPU can reorder the memory stores.
Lockless Reader: Concurrently, CPU B processes a second fragmented packet
from the same source IP. CPU B does a lockless lookup, finds the newly
inserted node, and returns it immediately.
Use-After-Free (UAF): CPU B reads p->refcnt as uninitialized garbage
(left over from previous kmalloc-128/192 allocations).
If the garbage is > 0, refcount_inc_not_zero(&p->refcnt) succeeds.
CPU A then executes refcount_set(&p->refcnt, 1), overwriting CPU B's increment.
When CPU B finishes with the fragment queue, it calls inet_putpeer(),
which drops the refcount to 0 and frees the node via RCU.
The node is now freed but remains linked in the rbtree,
resulting in a Use-After-Free in the rbtree.
Fixes: b145425f269a ("inetpeer: remove AVL implementation in favor of RB tree") Reported-by: Damiano Melotti <melotti@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260505133233.3039575-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
netdevsim: psp: fix init and uninit bugs
This series has three fixes. The first is a straightforward NULL
pointer dereference that is reachable by creating and destroying some
vfs on a kernel with INET_PSP enabled.
The last two patches deal with nsim_psp_rereg_write(), which is a
debugfs handler that reregisters netdevsim's psp_dev without
aquiescing and disabling tx/rx processing. This was added to enable
some tests in psp.py where a psp device is unregistered while it still
referenced by tcp socket state.
There are two issues with this code:
1. Calls to nsim_psp_uninit() are not properly serialized
2. netdevsim's psp_dev refcount can be released while nsim_do_psp() is
reading from it.
====================
Daniel Zahka [Tue, 5 May 2026 10:42:25 +0000 (03:42 -0700)]
netdevsim: psp: rcu protect psp_dev reference
There are two issues with the way psp_dev is used in nsim_do_psp():
1. There is no check for IS_ERR() on the peers psp_dev, before
dereferencing.
2. The refcount on this psp_dev can be dropped by
nsim_psp_rereg_write()
To fix this, we can make netdevsim's reference to its psp_dev an rcu
reference, and then nsim_do_psp() can read the fields it needs from an
rcu critical section.
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260505-psd-rcu-v1-3-a8f69ec1ab96@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Zahka [Tue, 5 May 2026 10:42:24 +0000 (03:42 -0700)]
netdevsim: psp: serialize calls to nsim_psp_uninit()
The debugfs write handler, nsim_psp_rereg_write(), can race against
nsim_destroy() and against itself, causing nsim_psp_uninit() to run
more than once concurrently. Two complementary changes serialize all
callers:
1. Delete the psp_rereg debugfs file from nsim_psp_uninit() before
doing the actual teardown. debugfs_remove() drains any in-flight
writers and prevents new ones from starting.
2. Add a mutex around the body of nsim_psp_rereg_write() so that two
concurrent userspace writers cannot both enter the teardown path
at once.
The teardown work itself is moved into a new __nsim_psp_uninit() that
the rereg handler calls under the mutex, while the public
nsim_psp_uninit() wraps it with the debugfs_remove()/mutex_destroy()
pair so nsim_destroy() doesn't have to know about the psp internals.
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260505-psd-rcu-v1-2-a8f69ec1ab96@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Zahka [Tue, 5 May 2026 10:42:23 +0000 (03:42 -0700)]
netdevsim: psp: only call nsim_psp_uninit() on PFs
VFs go through nsim_init_netdevsim_vf() which never calls
nsim_psp_init(), so ns->psp.dev stays NULL. nsim_psp_uninit() guards
with !IS_ERR(ns->psp.dev), so destroying a VF reaches
psp_dev_unregister(NULL) and dereferences NULL on the first
mutex_lock(&psd->lock):
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260505-psd-rcu-v1-1-a8f69ec1ab96@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1. Fix an IPv6 encapsulation error path that leaked route references
when UDPv6 ESP decapsulation resolved to an error route.
From Yilin Zhu.
2. Fix AH with ESN on async crypto paths by accounting for the extra
high-order sequence number when reconstructing the temporary
authentication layout in the completion callbacks.
From Michael Bomarito.
3. Fix XFRM output so it does not overwrite already-correct inner header
pointers when a tunnel layer such as VXLAN has already saved them.
The fix comes with new selftests. From Cosmin Ratiu.
4. Add the missing native payload size entry for XFRM_MSG_MAPPING in the
compat translation path. From Ruijie Li.
5. Harden __xfrm_state_delete() against repeated or inconsistent unhashing
of state list nodes by keying the removal on actual list membership and
using delete-and-init helpers. From Michal Kosiorek.
6. Prevent ESP from decrypting shared splice-backed skb fragments in place
by marking UDP splice frags as shared and forcing copy-on-write in ESP
input when needed. From Kuan-Ting Chen.
* tag 'ipsec-2026-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: esp: avoid in-place decrypt on shared skb frags
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
xfrm: provide message size for XFRM_MSG_MAPPING
xfrm: Don't clobber inner headers when already set
tools/selftests: Add a VXLAN+IPsec traffic test
tools/selftests: Use a sensible timeout value for iperf3 client
xfrm: ah: account for ESN high bits in async callbacks
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
====================
Jakub Kicinski [Wed, 6 May 2026 23:10:02 +0000 (16:10 -0700)]
Merge tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Includes changes:
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called
with BH disabled
* reduce ping count in selftest to ensure it completes within
timeout
* tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: reduce ping count in test.sh
ovpn: ensure packet delivery happens with BH disabled
ovpn: reset MAC header before passing skb up
====================
Bluetooth: HIDP: serialise l2cap_unregister_user via hidp_session_sem
Commit dbf666e4fc9b ("Bluetooth: HIDP: Fix possible UAF") made
hidp_session_remove() drop the L2CAP reference and set
session->conn = NULL once the session is considered removed, and
added a bare if (session->conn) guard around the kthread-exit
l2cap_unregister_user() call in hidp_session_thread(). The sibling
ioctl site in hidp_connection_del() still reads session->conn
unlocked and unguarded, and the kthread-exit guard itself is a
lockless double-read.
hidp_session_find() drops hidp_session_sem before returning, so
hidp_session_remove() can null session->conn between the lookup and
the call in hidp_connection_del(). Worse, since commit 752a6c9596dd
("Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user")
takes mutex_lock(&conn->lock) inside l2cap_unregister_user(), a
stale non-NULL snapshot also UAFs on conn->lock. v1 only added an
if (session->conn) guard at the ioctl site, which doesn't address
either race; Luiz suggested snapshotting session->conn under the
sem and clearing it before the call.
Taking hidp_session_sem across l2cap_unregister_user() would be
wrong: l2cap_conn_del() already establishes the lock order
conn->lock -> hidp_session_sem
via l2cap_unregister_all_users() -> user->remove ==
hidp_session_remove(), so taking hidp_session_sem before conn->lock
would AB/BA deadlock.
Factor a helper hidp_session_unregister_conn() that under
down_write(&hidp_session_sem) snapshots session->conn and clears
the member, then outside the sem calls l2cap_unregister_user() and
l2cap_conn_put() on the snapshot. Call it from both
hidp_connection_del() and hidp_session_thread()'s exit path. At
most one consumer wins the write-sem; later callers observe
session->conn == NULL and skip the unregister and put, so the
reference hidp_session_new() took via l2cap_conn_get() is consumed
exactly once. session_free() already tolerates a NULL session->conn.
Fixes: dbf666e4fc9b ("Bluetooth: HIDP: Fix possible UAF") Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/all/20260422011437.176643-1-michael.bommarito@gmail.com/ Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sizeof(conn->num_bis) is wrong - it would make sense to either use
conn->num_bis (before setting that to 0) or sizeof(conn->bis).
Fix it by using sizeof(conn->bis), the least intrusive change.
Luckily, nothing actually depends on this memset() working properly:
Nothing seems to ever read from conn->bis beyond conn->num_bis, and when
conn->num_bis is increased, the corresponding elements of conn->bis are
initialized. So I think this line could also just be removed.
This is a purely theoretical fix and should have no impact on actual
behavior.
Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: RFCOMM: pull credit byte with skb_pull_data()
rfcomm_recv_data() treats the first payload byte as a credit field when
the UIH frame carries PF and credit-based flow control is enabled.
After the header has been stripped, the PF/CFC path consumes that byte
with a direct skb->data dereference followed by skb_pull(). A malformed
short frame can reach this path without a byte available.
Use skb_pull_data() so the length check and pull happen together before
the returned credit byte is consumed.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.
After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.
After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.
Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log.
Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length") Cc: stable@vger.kernel.org Cc: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: virtio_bt: clamp rx length before skb_put
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length.
Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length") Cc: stable@vger.kernel.org Cc: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them.
Fixes: d019930b0049 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani <tristan@talencesecurity.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: ISO: Fix data-race on iso_pi(sk) in socket and HCI event paths
Several iso_pi(sk) fields (qos, qos_user_set, bc_sid, base, base_len,
sync_handle, bc_num_bis) are written under lock_sock in
iso_sock_setsockopt() and iso_sock_bind(), but read and written under
hci_dev_lock only in two other paths:
- iso_connect_bis() / iso_connect_cis(), invoked from connect(2),
read qos/base/bc_sid and reset qos to default_qos on the
qos_user_set validation failure -- all without lock_sock.
- iso_connect_ind(), invoked from hci_rx_work, writes sync_handle,
bc_sid, qos.bcast.encryption, bc_num_bis, base and base_len on
PA_SYNC_ESTABLISHED / PAST_RECEIVED / BIG_INFO_ADV_REPORT /
PER_ADV_REPORT events. The BIG_INFO handler additionally passes
&iso_pi(sk)->qos together with sync_handle / bc_num_bis / bc_bis
to hci_conn_big_create_sync() while setsockopt may be mutating
them.
Acquire lock_sock around the affected accesses in both paths.
The locking order hci_dev_lock -> lock_sock matches the existing
iso_conn_big_sync() precedent, whose comment documents the same
requirement for hci_conn_big_create_sync(). The HCI connect/bind
helpers do not wait for command completion -- they enqueue work via
hci_cmd_sync_queue{,_once}() / hci_le_create_cis_pending() and
return -- so the added hold time is comparable to iso_conn_big_sync().
KCSAN report:
BUG: KCSAN: data-race in iso_connect_cis / iso_sock_setsockopt
read to 0xffffa3ae8ce3cdc8 of 1 bytes by task 335 on cpu 0:
iso_connect_cis+0x49f/0xa20
iso_sock_connect+0x60e/0xb40
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffffa3ae8ce3cdc8 of 60 bytes by task 334 on cpu 1:
iso_sock_setsockopt+0x69a/0x930
do_sock_setsockopt+0xc3/0x170
__sys_setsockopt+0xd1/0x130
__x64_sys_setsockopt+0x64/0x80
x64_sys_call+0x1547/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 334 Comm: iso_setup_race Not tainted 7.0.0-10949-g8541d8f725c6 #44 PREEMPT(lazy)
The iso_connect_ind() races were found by inspection.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: SeungJu Cheon <suunj1331@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: ISO: Fix data-race on dst in iso_sock_connect()
iso_sock_connect() copies the destination address into
iso_pi(sk)->dst under lock_sock, then releases the lock and reads
it back with bacmp() to decide between the CIS and BIS connect
paths:
if (bacmp(&iso_pi(sk)->dst, BDADDR_ANY)) // <- no lock held
This read after release_sock() races with any concurrent write to
iso_pi(sk)->dst on the same socket.
Fix by reading the destination address directly from the local
sockaddr argument (sa->iso_bdaddr) instead of iso_pi(sk)->dst.
Since sa is a function-local argument, reading it requires no
locking and avoids the race.
This patch addresses only the bacmp() race in iso_sock_connect();
other unprotected iso_pi(sk) accesses are fixed separately in the
next patch.
KCSAN report:
BUG: KCSAN: data-race in memcmp+0x39/0xb0
race at unknown origin, with read to 0xffff8f96ea66dde3 of 1 bytes by task 549 on cpu 1:
memcmp+0x39/0xb0
iso_sock_connect+0x275/0xb40
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00 -> 0xee
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 549 Comm: iso_race_combin Not tainted 7.0.0-08391-g1d51b370a0f8 #40 PREEMPT(lazy)
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: SeungJu Cheon <suunj1331@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_uart: Fix NULL deref in recv callbacks when priv is uninitialized
When a fault is injected during hci_uart line discipline setup, the
proto open() callback may fail leaving hu->priv as NULL. A subsequent
TIOCSTI ioctl can trigger the recv() callback before priv is
initialized, causing a NULL pointer dereference.
Fix all four affected HCI UART protocol drivers by adding a NULL check
on hu->priv at the start of their recv() callbacks: h4, h5, ath and
bcsp.
Reported-by: syzbot+ff30eeab8e07b37d524e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ff30eeab8e07b37d524e Signed-off-by: Aurelien DESBRIERES <aurelien@hackers.camp> Assisted-by: Claude:claude-sonnet-4-6 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btintel_pcie: treat boot stage bit 12 as warning
CSR boot stage register bit 12 is documented as a device warning,
not a fatal error. Rename the bit definition accordingly and stop
including it in btintel_pcie_in_error().
This keeps warning-only boot stage values from being classified as
errors while preserving abort-handler state as the actual error
condition.
Fixes: 190377500fde ("Bluetooth: btintel_pcie: Dump debug registers on error") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sat, 18 Apr 2026 15:41:12 +0000 (18:41 +0300)]
Bluetooth: SCO: hold sk properly in sco_conn_ready
sk deref in sco_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk and parent sk is
currently accessed without either, and without checking parent->sk_state:
[Task 1] [Task 2]
sco_sock_release
sco_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
sco_sock_kill(sk)
UAF on sk deref
and similarly for access to sco_get_sock_listen() return value.
Fix possible UAF by holding sk refcount in sco_conn_ready() and making
sco_get_sock_listen() increase refcount. Also recheck after lock_sock
that the socket is still valid. Adjust conn->sk locking so it's
protected also by lock_sock() of the associated socket if any.
Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_conn_ready() [hdev->lock via hci_cb_list_lock]
...
mutex_lock(&conn->lock)
This is a classic AB/BA deadlock which lockdep reports as a circular
locking dependency when connecting a BLE MIDI keyboard (Carry-On FC-49).
Fix this by making hci_le_conn_update() defer the HCI command through
hci_cmd_sync_queue() so it no longer needs to take hdev->lock in the
caller context. The sync callback uses __hci_cmd_sync_status_sk() to
wait for the HCI_EV_LE_CONN_UPDATE_COMPLETE event, then updates the
stored connection parameters (hci_conn_params) and notifies userspace
(mgmt_new_conn_param) only after the controller has confirmed the update.
A reference on hci_conn is held via hci_conn_get()/hci_conn_put() for
the lifetime of the queued work to prevent use-after-free, and
hci_conn_valid() is checked before proceeding in case the connection was
removed while the work was pending. The hci_dev_lock is held across
hci_conn_valid() and all conn field accesses to prevent a concurrent
disconnect from invalidating the connection mid-use.
Fixes: f044eb0524a0 ("Bluetooth: Store latency and supervision timeout in connection params") Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dudu Lu [Wed, 15 Apr 2026 10:43:55 +0000 (18:43 +0800)]
Bluetooth: l2cap: fix MPS check in l2cap_ecred_reconf_req
The L2CAP specification states that if more than one channel is being
reconfigured, the MPS shall not be decreased. The current check has
two issues:
1) The comparison uses >= (greater-than-or-equal), which incorrectly
rejects reconfiguration requests where the MPS stays the same.
Since the spec says MPS "shall be greater than or equal to the
current MPS", only a strict decrease (remote_mps > mps) should be
rejected. Keeping the same MPS is valid.
2) The multi-channel guard uses `&& i` (loop index) to approximate
"more than one channel", but this incorrectly allows MPS decrease
for the first channel (i==0) even when multiple channels are being
reconfigured. Replace with `&& num_scid > 1` which correctly
checks whether the request covers more than one channel.
Fixes: 7accb1c4321a ("Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ") Signed-off-by: Dudu Lu <phx0fer@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dudu Lu [Wed, 15 Apr 2026 09:39:53 +0000 (17:39 +0800)]
Bluetooth: bnep: fix incorrect length parsing in bnep_rx_frame() extension handling
In bnep_rx_frame(), the BNEP_FILTER_NET_TYPE_SET and
BNEP_FILTER_MULTI_ADDR_SET extension header parsing has two bugs:
1) The 2-byte length field is read with *(u16 *)(skb->data + 1), which
performs a native-endian read. The BNEP protocol specifies this field
in big-endian (network byte order), and the same file correctly uses
get_unaligned_be16() for the identical fields in
bnep_ctrl_set_netfilter() and bnep_ctrl_set_mcfilter().
2) The length is multiplied by 2, but unlike BNEP_SETUP_CONN_REQ where
the length byte counts UUID pairs (requiring * 2 for two UUIDs per
entry), the filter extension length field already represents the total
data size in bytes. This is confirmed by bnep_ctrl_set_netfilter()
which reads the same field as a byte count and divides by 4 to get
the number of filter entries.
The bogus * 2 means skb_pull advances twice as far as it should,
either dropping valid data from the next header or causing the pull
to fail entirely when the doubled length exceeds the remaining skb.
Fix by splitting the pull into two steps: first use skb_pull_data() to
safely pull and validate the 3-byte fixed header (ctrl type + length),
then pull the variable-length data using the properly decoded length.
Fixes: bf8b9a9cb77b ("Bluetooth: bnep: Add support to extended headers of control frames") Signed-off-by: Dudu Lu <phx0fer@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly.
Fixes: a0bfde167b50 ("Bluetooth: ISO: Add support for connecting multiple BISes") Cc: stable@vger.kernel.org Signed-off-by: ZhiTao Ou <hkbinbinbin@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
David Carlier [Sun, 12 Apr 2026 20:29:16 +0000 (21:29 +0100)]
Bluetooth: hci_conn: fix potential UAF in create_big_sync
Add hci_conn_valid() check in create_big_sync() to detect stale
connections before proceeding with BIG creation. Handle the
resulting -ECANCELED in create_big_complete() and re-validate the
connection under hci_dev_lock() before dereferencing, matching the
pattern used by create_le_conn_complete() and create_pa_complete().
Keep the hci_conn object alive across the async boundary by taking
a reference via hci_conn_get() when queueing create_big_sync(), and
dropping it in the completion callback. The refcount and the lock
are complementary: the refcount keeps the object allocated, while
hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on
hdev->conn_hash, as required by hci_conn_del().
hci_conn_put() is called outside hci_dev_unlock() so the final put
(which resolves to kfree() via bt_link_release) does not run under
hdev->lock, though the release path would be safe either way.
Without this, create_big_complete() would unconditionally
dereference the conn pointer on error, causing a use-after-free
via hci_connect_cfm() and hci_conn_del().
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Cc: stable@vger.kernel.org Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sun, 12 Apr 2026 18:47:42 +0000 (21:47 +0300)]
Bluetooth: SCO: fix sleeping under spinlock in sco_conn_ready
sco_conn_ready calls sleeping functions under conn->lock spinlock.
The critical section can be reduced: conn->hcon is modified only with
hdev->lock held. It is guaranteed to be held in sco_conn_ready, so
conn->lock is not needed to guard it.
Move taking conn->lock after lock_sock(parent). This also follows the
lock ordering lock_sock() > conn->lock elsewhere in the file.
Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
- Fix build failures introduced when allowing to build 32-/64-bit only
VDSO
- Switch to dynamic parisc root device to avoid upcoming warnings
- Fix IRQ leak in LASI driver
* tag 'parisc-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix IRQ leak in LASI driver
parisc: Fix 64-bit kernel build when CONFIG_COMPAT=n
parisc: Fix build failure for 32-bit kernel with PA2.0 instruction set
parisc: drivers: switch to dynamic root device
Revert "parisc: led: fix reference leak on failed device registration"
MAINTAINERS: Add Steffen as reviewer for KVM/arm64
KVM/arm64 and KVM/s390 will eventually share some code. Add me as
a cross-reviewer from the s390 team to arm64 to help to keep both
architectures in sync.
KVM: arm64: Handle permission faults with guest_memfd
gmem_abort() calls kvm_pgtable_stage2_map() to make changes to stage 2. It
does this for both relaxing permissions on an existing mapping and to
install a missing mapping.
kvm_pgtable_stage2_map() doesn't make changes to stage 2 if there is an
existing, valid entry and the new entry modifies only the permissions.
This is checked in:
and if only the permissions differ, kvm_pgtable_stage2_map() returns
-EAGAIN and KVM returns to the guest to replay the instruction. The
assumption is that a concurrent fault on a different VCPU already mapped
the faulting IPA, and replaying the instruction will either succeed, or
cause a permission fault, which should be handled with
kvm_pgtable_stage2_relax_perms().
gmem_abort(), on a read or write fault on a system without DIC (instruction
cache invalidation required for data to instruction coherence), installs a
valid entry with read and write permissions, but without executable
permissions. On an execution fault on the same page, gmem_abort() attempts
to relax the permissions to allow execution, but calls
kvm_pgtable_stage2_map() to change the existing, valid, entry.
kvm_pgtable_stage2_map() returns -EAGAIN and KVM resumes execution from the
faulting instruction, which leads to an infinite loop of permission faults
on the same instruction.
Allow the guest to make progress by using kvm_pgtable_stage2_relax_perms()
to relax permissions.
Wei-Lin Chang [Tue, 5 May 2026 14:47:35 +0000 (15:47 +0100)]
KVM: arm64: nv: Consider the DS bit when translating TCR_EL2
When running an nVHE L1, TCR_EL2 is mapped to TCR_EL1. Writes to the
register are trapped and written to TCR_EL1 after a translation.
Booting an nVHE L1 with 52-bit VA isn't working because the translation
was ignoring the DS bit set by the guest, hence causing repeating level
0 faults. Add it in the translation function.
James Morse [Tue, 5 May 2026 16:52:03 +0000 (17:52 +0100)]
KVM: arm64: Work around C1-Pro erratum 4193714 for protected guests
C1-Pro cores with SME have an erratum where TLBI+DSB does not complete
all outstanding SME accesses. Instead a DSB needs to be executed on the
affected CPUs. The implication is that pages cannot be unmapped from the
host Stage 2 and then provided to a protected guest or to the
hypervisor. Host SME accesses may still complete after this point.
This erratum breaks pKVM's guarantees, and the workaround is hard to
implement as EL2 and EL1 share a security state meaning EL1 can mask
IPIs sent by EL2, leading to interrupt blackouts.
Instead, do this in EL3. This has the advantage of a separate security
state, meaning lower EL cannot mask the IPI. It is also simpler for EL3
to know about CPUs that are off or in PSCI's CPU_SUSPEND.
Add the needed hook to host_stage2_set_owner_metadata_locked(). This
covers the cases where the host loses access to a page:
__pkvm_host_donate_guest()
__pkvm_guest_unshare_host()
host_stage2_set_owner_locked() when owner_id == PKVM_ID_HYP
Since pKVM relies on the firmware call for correctness, check for the
firmware counterpart during protected KVM initialisation and fail the
pKVM initialisation if it is missing.
Signed-off-by: James Morse <james.morse@arm.com> Co-developed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oupton@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Sudeep Holla <sudeep.holla@kernel.org> Link: https://patch.msgid.link/20260505165205.2690919-1-catalin.marinas@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
projects / thirdparty / kernel / stable.git / log
