Andrea Righi [Mon, 11 May 2026 08:31:30 +0000 (10:31 +0200)]
sched_ext: Clear ops->priv on scx_alloc_and_add_sched() error paths
scx_alloc_and_add_sched() can fail after @sch has been assigned to
ops->priv. In those cases @sch is torn down (either via kfree() through
the err_free_* chain or via kobject_put() -> scx_kobj_release() -> RCU
work), but @ops->priv is left pointing at the about-to-be-freed pointer.
With the recent -EBUSY gate in scx_root_enable_workfn() and
scx_sub_enable_workfn() that rejects an attach when @ops->priv is still
non-NULL, see commit bbf30b383cf6 ("sched_ext: Fix ops->priv clobber on
concurrent attach/detach"), a dangling @ops->priv permanently locks the
kdata out: every future attach attempt sees a stale binding and returns
-EBUSY even though no scheduler is actually attached.
Clear @ops->priv on the post-assign failure paths so that the kdata
returns to its pre-attach state when the function returns ERR_PTR().
ceph: add ceph_has_realms_with_quotas() check to ceph_quota_update_statfs()
When MDS rejects a session, remove_session_caps() ->
__ceph_remove_cap() -> ceph_change_snap_realm() clears
i_snap_realm for every inode that loses its last cap.
The realm is restored once caps are re-granted after
reconnect. It is not a real error and this patch changes
pr_err_ratelimited_client() on doutc().
Every quota methods ceph_quota_is_max_files_exceeded(),
ceph_quota_is_max_bytes_exceeded(),
ceph_quota_is_max_bytes_approaching() calls
ceph_has_realms_with_quotas() check. This patch adds
the missing ceph_has_realms_with_quotas() call into
ceph_quota_update_statfs().
[ idryomov: add braces around both arms of multiline ifs ]
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
In __ceph_x_decrypt(), a part of the buffer p is interpreted as a
ceph_x_encrypt_header, and the magic field of this struct is accessed.
This happens without any guarantee that the buffer is large enough to
hold this struct. The function parameter ciphertext_len represents the
length of the ciphertext to decrypt and is guaranteed to be at most the
remaining size of the allocated buffer p. However, this value is not
necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message
frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold
the ciphertext at its end with a ciphertext_len of 8 or less, can
trigger an out-of-bounds memory access when accessing hdr->magic.
This patch fixes the issue by adding a check to ensure that the
decrypted plaintext in the buffer is large enough to represent at least
the ceph_x_encrypt_header.
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__build_xattrs() detects that index_version < version, it destroys and
rebuilds the entire xattr rb-tree from the new blob, potentially
increasing count, names_size, and vals_size.
The prealloc_blob size check that follows still uses the stale
required_blob_size computed before the rebuild, so it passes even when
prealloc_blob is too small for the now-larger tree. After __set_xattr()
adds one more xattr on top, __ceph_build_xattrs_blob() is called from
the cap flush path and hits:
Fix this by recomputing required_blob_size after __build_xattrs()
returns, using the current tree state. Also re-validate against
m_max_xattr_size to fall back to the sync path if the rebuilt tree now
exceeds the MDS limit.
Cc: stable@vger.kernel.org Fixes: d93231a6bc8a ("ceph: prevent a client from exceeding the MDS maximum xattr size") Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Reviewed-by: Alex Markuze <amarkuze@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The old_blob in __ceph_setxattr() can store
ci->i_xattrs.prealloc_blob value during the retry.
However, it is never called the ceph_buffer_put()
for the old_blob object. This patch fixes the issue of
the buffer leak.
libceph: Fix unnecessarily high ceph_decode_need() for uniform bucket
In crush_decode_uniform_bucket(), the item_weight field of the bucket
is set. This is a single field of type u32 since the uniform bucket uses
the same weight for all items. The value in ceph_decode_need() is set to
(1+b->h.size) * sizeof(u32), which is higher than actually needed.
This patch removes the call to ceph_decode_need() with the unnecessarily
high value and switches the subsequent operation from ceph_decode_32()
to ceph_decode_32_safe(), which already includes the correct bounds
check.
libceph: Fix potential out-of-bounds access in crush_decode()
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().
Zhenzhong Duan [Sat, 9 May 2026 02:43:46 +0000 (10:43 +0800)]
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com
Fixes: 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE") Cc: stable@vger.kernel.org Suggested-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20260422033538.95000-1-zhenzhong.duan@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The global static blocked domain is a dummy domain without corresponding
dmar_domain structure, accessing beyond iommu_domain structure triggers
oops easily. Fix it by return early in domain_remove_dev_pasid() like
identity domain.
Fixes: 7d0c9da6c150 ("iommu/vt-d: Add set_dev_pasid callback for dma domain") Cc: stable@vger.kernel.org Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20260421031347.1408890-1-zhenzhong.duan@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Naval Alcalá [Sat, 9 May 2026 02:43:44 +0000 (10:43 +0800)]
iommu/vt-d: Disable DMAR for Intel Q35 IGFX
Intel Q35 integrated graphics (8086:29b2) exhibits broken DMAR
behaviour similar to other G4x/GM45 devices for which DMAR is
already disabled via quirks.
When DMAR is enabled, the system may hard lock up during boot or
early device initialization, requiring a reset.
Add the missing PCI ID to the existing quirk list to disable
DMAR for this device.
Guopeng Zhang [Sat, 9 May 2026 10:20:30 +0000 (18:20 +0800)]
cgroup/cpuset: Reset DL migration state on can_attach() failure
cpuset_can_attach() accumulates temporary SCHED_DEADLINE migration
state in the destination cpuset while walking the taskset.
If a later task_can_attach() or security_task_setscheduler() check
fails, cgroup_migrate_execute() treats cpuset as the failing subsystem
and does not call cpuset_cancel_attach() for it. The partially
accumulated state is then left behind and can be consumed by a later
attach, corrupting cpuset DL task accounting and pending DL bandwidth
accounting.
Reset the pending DL migration state from the common error exit when
ret is non-zero. Successful can_attach() keeps the state for
cpuset_attach() or cpuset_cancel_attach().
Fixes: 2ef269ef1ac0 ("cgroup/cpuset: Free DL BW in case can_attach() fails") Cc: stable@vger.kernel.org # v6.10+ Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Chen Ridong <chenridong@huaweicloud.com> Reviewed-by: Waiman Long <longman@redhat.com>
iommu: Warn on premature unblock during DMA aliased sibling reset
When two aliased siblings are in the same iommu_group, they might share the
same RID. The reset functions don't support this case, though it is unclear
whether there is a real case of having an ATS capable device on a PCI/PCI-X
bus.
Theoretically, however, if two aliased devices are resetting concurrently,
one might be unblocked prematurely in the middle of the reset by the other
sibling who completes the reset first.
This isn't a regression from this series but it's better to spit a warning,
so we can know if such use case is common enough for us to make subsequent
patches for its coverage.
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment.
iommu: Fix ATS invalidation timeouts during __iommu_remove_group_pasid()
If a device is blocked, its PASID domains are already detached. Repeating
iommu_remove_dev_pasid() is unnecessary and might trigger ATS invalidation
timeouts.
Skip the iommu_remove_dev_pasid() call upon gdev->blocked.
Shuai found that cxl_reset_bus_function() calls pci_reset_bus_function()
internally while both are calling pci_dev_reset_iommu_prepare/done().
As pci_dev_reset_iommu_prepare() doesn't support re-entry, the inner call
will trigger a WARN_ON and return -EBUSY, resulting in failing the entire
device reset.
On the other hand, removing the outer calls in the PCI callers is unsafe.
As pointed out by Kevin, device-specific quirks like reset_hinic_vf_dev()
execute custom firmware waits after their inner pcie_flr() completes. If
the IOMMU protection relies solely on the inner reset, the IOMMU will be
unblocked prematurely while the device is still resetting.
Instead, fix this by making pci_dev_reset_iommu_prepare/done() reentrant.
Introduce gdev->reset_depth to handle the re-entries on the same device.
iommu: Replace per-group resetting_domain with per-gdev blocked flag
The core tracks device resetting states with a per-group resetting_domain,
while a reset is actually per group-device. Such a mismatch might lead to
confusion and even difficulty to untangle per-gdev handling requirement.
Shuai found that cxl_reset_bus_function() calls pci_reset_bus_function()
internally while both are calling pci_dev_reset_iommu_prepare/done(). And
the solution requires the core to track at the group_device level as well.
Introduce a 'blocked' flag to struct group_device, to allow a multi-device
group to isolate concurrent device resets independently.
As the reset routine is per gdev, it cannot clear group->resetting_domain
without iterating over the device list to ensure no other device is being
reset. Simplify it by replacing the resetting_domain with a 'recovery_cnt'
in the struct iommu_group.
No functional change. But this is essential to apply following bug fixes.
iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done()
Local sashiko review pointed it out that group->domain could be NULL when
a default domain fails to allocate during the first probe, which can crash
at domain->ops->attach_dev dereference in __iommu_attach_device() invoked
by pci_dev_reset_iommu_done().
pci_dev_reset_iommu_prepare() is fine as an old_domain pointer can be NULL.
Skip the re-attach in pci_dev_reset_iommu_done() to fix the bug.
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b15b ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots.
Fixes: e874c666b15b ("iommu/amd: Change rlookup, irq_lookup, and alias to use kvalloc()") Cc: stable@vger.kernel.org Reported-by: Ziyuan Chen <zc@anthropic.com> Tested-by: Ziyuan Chen <zc@anthropic.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Assisted-by: Claude:unspecified Signed-off-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Eder Zulian [Fri, 10 Apr 2026 12:55:50 +0000 (14:55 +0200)]
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
In iommu_mmio_write() and iommu_capability_write(), the variables
dbg_mmio_offset and dbg_cap_offset are declared as int. However, they
are populated using kstrtou32_from_user(). If a user provides a
sufficiently large value, it can become a negative integer.
Prior to this patch, the AMD IOMMU debugfs implementation was already
protected by different mechanisms.
1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so
e.g. 0xffffffff isn't a valid input.
if (cnt > OFS_IN_SZ)
return -EINVAL;
2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int
and iommu->mmio_phys_end is u64
if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64))
return -EINVAL;
3. The show handlers would currently catch the negative number and
refuse to perform the read.
Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the
input, and check for negative values to explicitly prevent out-of-bounds
memory accesses directly in iommu_mmio_write() and
iommu_capability_write().
Signed-off-by: Eder Zulian <ezulian@redhat.com> Fixes: 7a4ee419e8c1 ("iommu/amd: Add debugfs support to dump IOMMU MMIO registers") Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Andrea Righi [Mon, 11 May 2026 06:18:12 +0000 (08:18 +0200)]
sched_ext: Fix ops->priv clobber on concurrent attach/detach
Under heavy concurrent attach/detach operations, scx_claim_exit() can
trigger a NULL pointer dereference. This can be reproduced running the
reload_loop kselftests inside a virtme-ng session:
T1 acquires scx_enable_mutex inside scx_root_disable()'s mutex_unlock
window and starts a fresh attach on the same kdata, assigning sch_a800
to @ops->priv. T2 then continues out of scx_disable()/flush_disable_work
and clobbers @ops->priv to NULL, leaking sch_a800; the bpf_link is gone
but state stays SCX_ENABLED, so all future attaches fail with -EBUSY
permanently. The next bpf_scx_unreg() on that kdata then reads NULL
@ops->priv and dereferences it in scx_claim_exit().
Make @ops->priv the lifecycle binding: in scx_root_enable_workfn() and
scx_sub_enable_workfn(), after the existing state check and still under
scx_enable_mutex, refuse with -EBUSY if @ops->priv is non-NULL. This
rejects an attempt to reuse a kdata that is still bound to a previous
scheduler instance, closing the race without changing the unreg side.
Andrea Righi [Sun, 10 May 2026 17:52:11 +0000 (19:52 +0200)]
selftests/sched_ext: Fix build error in dequeue selftest
Building the dequeue selftest with newer compilers (e.g., gcc 16)
triggers the following error:
dequeue.c:28:22: error: variable 'sum' set but not used
The 'volatile' qualifier prevents the writes from being optimized away,
but does not silence the unused variable 'sum' is indeed only written
and never read.
Consume 'sum' via an empty asm() with a register input constraint. This
forces the compiler to keep the accumulated value (preserving the CPU
stress loop) and avoiding the build error.
Fixes: 658ad2259b3e ("selftests/sched_ext: Add test to validate ops.dequeue() semantics") Signed-off-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
cg_read_strcmp() allocated a buffer sized to strlen(expected) + 1,
then passed it to read_text() which calls read(fd, buf, size-1).
When comparing against an empty string (""), strlen("") = 0 gives a
1-byte buffer, and read() is asked to read 0 bytes. The file content
is never actually read, so strcmp("", buf) always returns 0 regardless
of the real content. This caused cg_test_proc_killed() to always
report the cgroup as empty immediately, making OOM tests pass without
verifying that processes were killed.
Signed-off-by: Hongfu Li <lihongfu@kylinos.cn> Signed-off-by: Tejun Heo <tj@kernel.org>
Guopeng Zhang [Mon, 11 May 2026 01:31:50 +0000 (09:31 +0800)]
cgroup/dmem: Return -ENOMEM on failed pool preallocation
get_cg_pool_unlocked() handles allocation failures under dmemcg_lock by
dropping the lock, preallocating a pool with GFP_KERNEL, and retrying the
locked lookup and creation path.
If the fallback allocation fails too, pool remains NULL. Since the loop
condition is while (!pool), the function can keep retrying instead of
propagating the allocation failure to the caller.
Set pool to ERR_PTR(-ENOMEM) when the fallback allocation fails so the
loop exits through the existing common return path. The callers already
handle ERR_PTR() from get_cg_pool_unlocked(), so this restores the
expected error path.
Mark Brown [Mon, 11 May 2026 01:04:02 +0000 (10:04 +0900)]
ASoC: sdw_utils: make RT712/RT721 CODEC_MIC be optional
Bard Liao <yung-chuan.liao@linux.intel.com> says:
The RT712 and RT721 codec mic are optional and are not used on some
products. Add a quirk to make it optional and skip the codec mic DAI
when it is not present in DisCo table.
Mac Chiang [Fri, 8 May 2026 09:32:23 +0000 (17:32 +0800)]
ASoC: sdw_utils: Add quirk to ignore RT712 CODEC_MIC
Some devices do not use CODEC_MIC but use the host PCH_DMIC
instead. Add a quirk to skip the CODEC_MIC DAI when it is not present
in disco table, ensuring the correct capture device is used.
If CODEC_MIC is present, it continues to be used as default.
Jang Pyohwan [Sat, 9 May 2026 08:53:10 +0000 (17:53 +0900)]
ASoC: Intel: soc-acpi: add LG Gram 16Z90U RT713 + single RT1320 quirk
Add a SoundWire machine table entry for the LG Gram Pro 2026
(16Z90U-KU7BK), which has an unusual configuration:
sdw:0:1:025d:1320:01 single stereo RT1320 SmartAmp on link 1
sdw:0:3:025d:0713:01 RT713 jack/headset codec on link 3
Existing rt713-rt1320 boards have two RT1320 amps on different links
("link_mask = BIT(1) | BIT(2) | BIT(3)"). The LG Gram uses a single
stereo RT1320 chip, so the new entry uses "link_mask = BIT(1) |
BIT(3)" with the existing rt1320_1_group2_adr structure, leaving the
two-channel routing to the topology.
The RT713 on this board does not expose a SMART_MIC function in
ACPI, so the .machine_check callback used by the existing entries
(snd_soc_acpi_intel_sdca_is_device_rt712_vb) would reject this
board. Drop machine_check for the new entry; speaker output and
the headset jack do not depend on the SMART_MIC presence check.
The corresponding topology source has been submitted to the SOF
project at https://github.com/thesofproject/sof/pull/10760 . The
generated sof-ptl-rt713-l3-rt1320-l1-2ch.tplg and
nhlt-sof-ptl-rt713-l3-rt1320-l1.bin will follow in linux-firmware
once that lands.
Tested on Ubuntu 26.04 with kernel 7.0.0-15: speaker (RT1320
stereo), headphone jack with auto-routing, headset mic, and the
internal NHLT DMIC array all work via the UCM HiFi profile.
Gary C Wang [Fri, 8 May 2026 10:42:38 +0000 (18:42 +0800)]
ASoC: soc-acpi-intel-arl-match: add rt712_l0_rt1320_l3 support
Add support for using the rt712 multi-function codec on link 0 and the
rt1320 amplifier on link 3 on ARL platforms.
Signed-off-by: Gary C Wang <gary.c.wang@intel.com> Co-developed-by: Mac Chiang <mac.chiang@intel.com> Signed-off-by: Mac Chiang <mac.chiang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20260508104239.1247525-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
spi: amd: Set correct bus number in ACPI probe path
On platforms where the HID2 SPI controller (AMDI0063) is enumerated via
ACPI instead of PCI, amd_spi_probe() unconditionally sets bus_num to 0,
while the PCI probe path assigns bus_num 2 for HID2 controller.
Align the ACPI probe path to use the same bus number so that userspace
and SPI client drivers see a consistent bus assignment regardless of the
enumeration method.
Fixes: b644c2776652 ("spi: spi_amd: Add PCI-based driver for AMD HID2 SPI controller") Cc: stable@vger.kernel.org # v6.16+ Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com> Link: https://patch.msgid.link/20260507180051.4158674-1-krishnamoorthi.m@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
A phandle-array is really a matrix and needs constraints on the number
of elements for both the inner and outer dimensions. Add the missing
inner constraints.
Fixes: 472d77bdc511 ("ASoC: dt-bindings: mediatek,mt8173-rt5650-rt5514: convert to DT schema") Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260508182438.1757394-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 5 May 2026 16:47:44 +0000 (19:47 +0300)]
MAINTAINERS: ASoC/ti: Remove myself and add Sen Wang as maintainer
As I cannot spend adequate time to fulfill my role as maintainer for the
TI ASoC drivers, it is for the better if I resign and hand over the role
to Sen Wang.
Tejun Heo [Sun, 10 May 2026 20:08:16 +0000 (10:08 -1000)]
sched_ext: Handle SCX_TASK_NONE in disable/switched_from paths
scx_fail_parent() leaves cgroup tasks at (state=NONE, sched=parent,
sched_class=ext) until the parent itself is torn down by the scx_error() it
raised. When the later root_disable iterates them, two paths trip on NONE.
scx_disable_and_exit_task() re-enters the wrapper at NONE: the inner switch
returns early but the trailing scx_set_task_sched(p, NULL) clobbers the
parent sched left by scx_fail_parent(), and scx_set_task_state(p, NONE)
wastes a write on an already-NONE task. switched_from_scx() then calls
scx_disable_task(), which WARNs on non-ENABLED state and writes state=READY,
producing a NONE -> READY transition the validation matrix rejects.
Treat NONE as "nothing to do" in both paths. Add a NONE early-return at the
top of scx_disable_and_exit_task() and a parallel NONE check in
switched_from_scx() next to task_dead_and_done().
Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
Tejun Heo [Sun, 10 May 2026 20:08:16 +0000 (10:08 -1000)]
sched_ext: Close sub-sched init race with post-init DEAD recheck
scx_sub_enable_workfn()'s init pass and scx_sub_disable() migration both
drop the rq lock to call __scx_init_task() against the other sched. A
TASK_DEAD @p can fall through sched_ext_dead() in that window.
sched_ext_dead() runs ops.exit_task() on the sched @p was attached to, not
on the sched whose init just completed, so the new allocation leaks.
Reuse the DEAD signal set by sched_ext_dead(). After __scx_init_task()
returns, take task_rq_lock(p) and check for DEAD; on hit, call
scx_sub_init_cancel_task() against the sub sched the init ran for and drop
@p; on miss, proceed as before.
Tejun Heo [Sun, 10 May 2026 20:08:16 +0000 (10:08 -1000)]
sched_ext: Close root-enable vs sched_ext_dead() race with SCX_TASK_INIT_BEGIN
scx_root_enable_workfn() drops the iter rq lock for ops.init_task() and a
TASK_DEAD @p can fall through sched_ext_dead() in that window. The race hits
when sched_ext_dead() observes SCX_TASK_INIT (the intermediate state before
@p->scx.sched is published) and dereferences NULL via SCX_HAS_OP(NULL,
exit_task), or observes SCX_TASK_NONE during the unlocked init window and
skips cleanup so exit_task() never runs.
Add SCX_TASK_INIT_BEGIN. The enable path writes NONE -> INIT_BEGIN under the
iter rq lock, then takes the rq lock again after init to walk INIT_BEGIN ->
INIT -> READY. sched_ext_dead() that wins the rq-lock race observes
INIT_BEGIN and sets DEAD without calling into ops; the post-init recheck
unwinds via scx_sub_init_cancel_task().
scx_fork() runs single-threaded against sched_ext_dead() (the task is not on
scx_tasks until scx_post_fork() adds it) so its INIT_BEGIN -> INIT walk
needs no rq-lock pairing; it rolls back to NONE on ops.init_task() failure.
The validation matrix grows the INIT_BEGIN row and the INIT_BEGIN -> DEAD
edge; INIT now requires INIT_BEGIN as the predecessor. scx_sub_disable()'s
migration writes INIT_BEGIN as a synthetic predecessor to satisfy the
tightened verification.
The sub-sched paths still race with sched_ext_dead() during the unlocked
init window. This will be fixed by the next patch.
Tejun Heo [Sun, 10 May 2026 20:08:16 +0000 (10:08 -1000)]
sched_ext: Replace SCX_TASK_OFF_TASKS flag with SCX_TASK_DEAD state
SCX_TASK_OFF_TASKS marked tasks already through sched_ext_dead() so cgroup
task iteration would skip them. This can be expressed better with a task
state. Replace the flag with SCX_TASK_DEAD.
scx_disable_and_exit_task() resets state to NONE on its way out, so
sched_ext_dead() now sets DEAD after the wrapper returns. The validation
matrix grows NONE -> DEAD, warns on DEAD -> NONE, and tightens READY's
predecessor to INIT or ENABLED so the new DEAD value cannot silently
transition to READY.
Prepares for the following enable vs dead race fix.
Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
Tejun Heo [Sun, 10 May 2026 20:08:16 +0000 (10:08 -1000)]
sched_ext: Inline scx_init_task() and move RESET_RUNNABLE_AT into scx_set_task_state()
Prepare for the SCX_TASK_INIT_BEGIN/DEAD work that follows by collapsing the
scx_init_task() helper. Move the SCX_TASK_RESET_RUNNABLE_AT setting into
scx_set_task_state() on the INIT transition (it was set unconditionally at
every INIT site through the scx_init_task() helper), inline scx_init_task()
into scx_fork() and scx_root_enable_workfn(), and drop the helper.
As a side effect, scx_sub_disable() migration sequence now also sets
RESET_RUNNABLE_AT (it previously wrote INIT directly without going through
scx_init_task()). The flag triggers a runnable_at reset on the next
set_task_runnable(), which is harmless on a task that has just been moved
between scheds.
On root-enable, p->scx.flags is written without the task's rq lock. The task
isn't visible to scx yet, and a follow-up patch restores the lock-held
write.
v2: Note p->scx.flags rq-lock relaxation on root-enable path. (Andrea)
Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
Tejun Heo [Sun, 10 May 2026 20:08:16 +0000 (10:08 -1000)]
sched_ext: Cleanups in preparation for the SCX_TASK_INIT_BEGIN/DEAD work
Cleanups in preparation for the state-machine work that follows:
- Convert three sub-sched call sites that open-code
rcu_assign_pointer(p->scx.sched, ...) to scx_set_task_sched().
- Move scx_get_task_state()/scx_set_task_state() above the SCX task iter
section so scx_task_iter_next_locked() can use them without a forward
declaration.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andrea Righi <arighi@nvidia.com>
net: xgene: fix mdio_np leak in xgene_mdiobus_register()
The for_each_child_of_node() loop captures mdio_np via break,
holding the refcount. of_mdiobus_register() does not consume the
reference, so it leaks on success.
Jakub Kicinski [Sun, 10 May 2026 17:07:37 +0000 (10:07 -0700)]
Merge tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv:
batman-adv: bla: put backbone reference on failed claim hash insert
batman-adv: bla: only purge non-released claims
batman-adv: bla: prevent use-after-free when deleting claims
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
batman-adv: stop caching unowned originator pointers in BAT IV
batman-adv: stop tp_meter sessions during mesh teardown
batman-adv: reject new tp_meter sessions during teardown
batman-adv: fix integer overflow on buff_pos
====================
net: ena: PHC: Fix potential use-after-free in get_timestamp
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver") Cc: stable@vger.kernel.org Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260508062126.7273-1-akiyano@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chuck Lever [Sun, 19 Apr 2026 18:52:59 +0000 (14:52 -0400)]
NFSD: Fix infinite loop in layout state revocation
find_one_sb_stid() skips stids whose sc_status is non-zero, but the
SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status
before calling nfsd4_close_layout(). The retry loop therefore finds
the same layout stid on every iteration, hanging the revoker
indefinitely.
Fixes: 1e33e1414bec ("nfsd: allow layout state to be admin-revoked.") Reported-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Jeff Layton [Sat, 11 Apr 2026 21:12:16 +0000 (17:12 -0400)]
sunrpc: start cache request seqno at 1 to fix netlink GET_REQS
sunrpc_cache_requests_snapshot() filters requests with
crq->seqno <= min_seqno. The min_seqno for the first netlink
dump call is cb->args[0] which is 0. Since next_seqno was
initialized to 0, the very first cache request got seqno=0
and was silently skipped by the snapshot (0 <= 0 is true).
This caused netlink-based GET_REQS to return 0 pending requests
even when a request was queued, preventing mountd from resolving
cache entries (particularly expkey/nfsd.fh). The unresolved
CACHE_PENDING state blocked all further notifications for the
entry, leading to permanent NFS4ERR_DELAY hangs.
Start next_seqno at 1 so all requests have seqno >= 1 and pass
the snapshot filter when min_seqno is 0.
Fixes: facc4e3c8042 ("sunrpc: split cache_detail queue into request and reader lists") Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd: update mtime/ctime on COPY in presence of delegated attributes
When delegated attributes are given on open, the file is opened with
NOCMTIME and modifying operations do not update mtime/ctime as to not get
out-of-sync with the client's delegated view. However, for COPY operation,
the server should update its view of mtime/ctime and reflect that in any
GETATTR queries.
Fixes: e5e9b24ab8fa ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation") Cc: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd: update mtime/ctime on CLONE in presense of delegated attributes
When delegated attributes are given on open, the file is opened with
NOCMTIME and modifying operations do not update mtime/ctime as to not get
out-of-sync with the client's delegated view. However, for CLONE operation,
the server should update its view of mtime/ctime and reflect that in any
GETATTR queries.
Fixes: e5e9b24ab8fa ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation") Cc: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Scott Mayhew [Tue, 7 Apr 2026 22:08:57 +0000 (18:08 -0400)]
nfsd: fix file change detection in CB_GETATTR
RFC 8881, section 10.4.3 doesn't say anything about caching the file
size in the delegation record, nor does it say anything about comparing
a cached file size with the size reported by the client in the
CB_GETATTR reply for the purpose of determining if the client holds
modified data for the file.
What section 10.4.3 of RFC 8881 does say is that the server should
compare the *current* file size with the size reported by the client
holding the delegation in the CB_GETATTR reply, and if they differ to
treat it as a modification regardless of the change attribute retrieved
via the CB_GETATTR.
Doing otherwise would cause the server to believe the client holding the
delegation has a modified version of the file, even if the client
flushed the modifications to the server prior to the CB_GETATTR. This
would have the added side effect of subsequent CB_GETATTRs causing
updates to the mtime, ctime, and change attribute even if the client
holding the delegation makes no further updates to the file.
Modify nfsd4_deleg_getattr_conflict() to obtain the current file size
via i_size_read(). Retain the ncf_cur_fsize field, since it's a
convenient way to return the file size back to nfsd4_encode_fattr4(),
but don't use it for the purpose of detecting file changes. Remove the
unnecessary initialization of ncf_cur_fsize in nfs4_open_delegation().
Also, if we recall the delegation (because the client didn't respond to
the CB_GETATTR), then skip the logic that checks the nfs4_cb_fattr
fields.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation") Cc: stable@vger.kernel.org Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
tools/ynl: add missing uapi header deps in Makefile.deps
ethtool.h includes linux/typelimits.h which is a relatively new header
not yet shipped in most distro kernel-header packages. Without the
explicit entry, the build silently falls through to -idirafter.
dev_energymodel.h is a new YNL family whose uapi header is not in
system paths at all and was missing a CFLAGS entry entirely.
Hyunwoo Kim [Fri, 8 May 2026 08:53:09 +0000 (17:53 +0900)]
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Cc: stable@vger.kernel.org Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 10 May 2026 15:10:47 +0000 (08:10 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
Commit 81af9e40e2e4 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
moved QPHY_V6_PCS_UFS_PLL_CNTL register configuration from the shared
sm8650_ufsphy_g5_pcs table to the SM8650-specific sm8650_ufsphy_pcs base
table to fix Gear 4 operation on SM8650.
However, this change inadvertently broke kaanapali and SM8750 SoCs
which also rely on the shared sm8650_ufsphy_g5_pcs table for Gear 5
configuration but use their own sm8750_ufsphy_pcs base table. After the
change, kaanapali PHYs are left without the required PLL_CNTL = 0x33
setting, causing the PHY PLL to remain at its hardware reset default
value, preventing PLL lock and resulting in DME_LINKSTARTUP timeouts.
Fix this by adding the missing QPHY_V6_PCS_UFS_PLL_CNTL = 0x33 entry
to the sm8750_ufsphy_pcs table, mirroring what the original commit
already did for sm8650_ufsphy_pcs.
Cc: stable@vger.kernel.org # v6.19.12 Fixes: 81af9e40e2e4 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4") Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20260415104851.2763238-1-nitin.rawat@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: exynos5-usbdrd: fix USB 2.0 HS PHY tuning values for Exynos7870
The existing PHYPARAM0 tuning values for Exynos7870 are incorrect,
causing the USB 2.0 PHY to fail high-speed negotiation and fall back
to full-speed (12Mbps) operation.
Fix TXVREFTUNE (transmitter voltage reference) from 14 to 3,
TXRESTUNE (transmitter impedance) from 3 to 2, and SQRXTUNE
(squelch threshold) from 6 to 5. Also explicitly set
TXPREEMPPULSETUNE to 0, which was previously missing from the
tuning table despite being included in the register mask.
All values are derived from the vendor kernel for the Samsung
Galaxy A6 (SM-A600FN), as no public hardware documentation is
available for the Exynos7870 USB DRD PHY. With these corrections,
the PHY successfully negotiates high-speed (480Mbps) operation.
The existing code reads a single hs_term_range_adj value from bit field
[10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly.
However, on SoCs that support per-pad termination, each pad has its own
hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3
in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13]
respectively.
Fix the calibration by reading per-pad values from the appropriate fuse
registers. For SoCs that do not support per-pad termination, replicate
pad 0's value to all pads to maintain existing behavior.
Add a has_per_pad_term flag to the SoC data to indicate whether per-pad
termination values are available in FUSE_USB_CALIB_EXT_0.
The mvebu_a3700_utmi_phy_power_off() function tries to modify the
USB2_PHY_CTRL register by using the IO address of the PHY IP block along
with the readl/writel IO accessors. However, the register exist in the
USB miscellaneous register space, and as such it must be accessed via
regmap like it is done in the mvebu_a3700_utmi_phy_power_on() function.
Change the code to use regmap_update_bits() for modífying the register
to fix this.
DaeMyung Kang [Sun, 10 May 2026 02:13:11 +0000 (11:13 +0900)]
ntfs: fix empty_buf and ra lifetime bugs in ntfs_empty_logfile()
ntfs_empty_logfile() has three related allocator bugs around the
@empty_buf and @ra buffers it uses inside the per-cluster loop.
When the loop encounters a runlist entry with LCN_RL_NOT_MAPPED, the
function kvfrees @empty_buf and goes to map_vcn to remap. @empty_buf
is not cleared. If ntfs_map_runlist_nolock() fails on re-entry,
control jumps to the err label which kvfrees @empty_buf a second time.
In the same branch, @ra is left allocated. When the remap succeeds
the function falls through the @empty_buf re-allocation and the @ra
re-allocation, overwriting the previous @ra pointer and leaking it.
The success path frees @empty_buf with kfree() instead of kvfree().
kvzalloc() may fall back to vmalloc(), in which case kfree() does not
correctly release the memory.
A KASAN-enabled QEMU harness mirroring this control flow reports
"BUG: KASAN: double-free" when the second ntfs_map_runlist_nolock()
fails.
Clear both @empty_buf and @ra after the in-loop releases so the err
path is a no-op when the buffers have already been freed and so the
remap-success path does not leak the previous @ra. Switch the success
path to kvfree() to match the @empty_buf allocator.
Linus Torvalds [Sun, 10 May 2026 01:42:54 +0000 (18:42 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix sk_local_storage diag dump via netlink (Amery Hung)
- Fix off-by-one in arena direct-value access (Junyoung Jang)
- Reject TCP_NODELAY in bpf-tcp congestion control (KaFai Wan)
- Fix type confusion in bpf_*_sock() (Kuniyuki Iwashima)
- Reject TX-only AF_XDP sockets (Linpu Yu)
- Don't run arg-tracking analysis twice on main subprog (Paul Chaignon)
- Fix NULL pointer dereference in bpf_sk_storage_clone and fib lookup
(Weiming Shi)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix off-by-one boundary validation in arena direct-value access
xskmap: reject TX-only AF_XDP sockets
bpf: Don't run arg-tracking analysis twice on main subprog
bpf: Free reuseport cBPF prog after RCU grace period.
bpf: tcp: Fix type confusion in sol_tcp_sockopt().
bpf: tcp: Fix type confusion in bpf_skc_to_tcp6_sock().
bpf: tcp: Fix type confusion in bpf_skc_to_tcp_sock().
mptcp: bpf: Fix type confusion in bpf_mptcp_sock_from_subflow()
selftest: bpf: Add test for bpf_tcp_sock() and RAW socket.
bpf: tcp: Fix type confusion in bpf_tcp_sock().
tools/headers: Regenerate stddef.h to fix BPF selftests
bpf: Fix sk_local_storage diag dumping uninitialized special fields
bpf: Fix NULL pointer dereference in bpf_skb_fib_lookup()
sockmap: Fix sk_psock_drop() race vs sock_map_{unhash,close,destroy}().
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
selftests/bpf: Verify bpf-tcp-cc rejects TCP_NODELAY
selftests/bpf: Test TCP_NODELAY in TCP hdr opt callbacks
bpf: Reject TCP_NODELAY in bpf-tcp-cc
bpf: Reject TCP_NODELAY in TCP header option callbacks
Junyoung Jang [Sun, 26 Apr 2026 17:25:05 +0000 (02:25 +0900)]
bpf: Fix off-by-one boundary validation in arena direct-value access
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Linpu Yu [Fri, 8 May 2026 14:43:43 +0000 (22:43 +0800)]
xskmap: reject TX-only AF_XDP sockets
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23ceaca ("xsk: Fix possible segfault at xskmap entry insertion") Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Yifan Wu <yifanwucs@gmail.com> Signed-off-by: Linpu Yu <linpu5433@gmail.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Paul Chaignon [Thu, 7 May 2026 18:22:06 +0000 (20:22 +0200)]
bpf: Don't run arg-tracking analysis twice on main subprog
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Linus Torvalds [Sat, 9 May 2026 18:47:39 +0000 (11:47 -0700)]
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
DaeMyung Kang [Sat, 9 May 2026 06:12:37 +0000 (15:12 +0900)]
ntfs: validate attribute name bounds before returning it
ntfs_attr_find() validates a named attribute before comparing it with the
requested name, but that check is currently after the AT_UNUSED handling.
When callers enumerate attributes with AT_UNUSED, ntfs_attr_find() can
return a malformed named attribute before checking whether name_offset
and name_length stay within the attribute record.
Some enumeration callers use the returned attribute name pointer
directly. For example, one path passes (attr + name_offset, name_length)
to ntfs_attr_iget(), where the name can later be copied according to
name_length. A malformed on-disk name_offset/name_length pair should not
be exposed to those callers.
Move the existing name bounds validation before returning attributes
during AT_UNUSED enumeration, and write it as an offset/remaining-size
check so the subtraction cannot underflow. Extract the converted values
into local variables (name_offset, attr_len, name_size) to make the
intent explicit and avoid repeating the endian conversions inside the
bounds check. This keeps matching attributes on the same checked path
while also covering attribute enumeration.
A small userspace ASAN model with attr length=32, name_offset=124 and
name_length=8 reproduces a heap-buffer-overflow read in the old
enumeration path. With this change the same malformed attribute is
rejected before the name pointer is returned to the caller.
DaeMyung Kang [Sat, 9 May 2026 06:12:36 +0000 (15:12 +0900)]
ntfs: fix MFT bitmap scan 2^32 boundary check
NTFS MFT record numbers are limited to the 32-bit range, and
ntfs_mft_record_layout() rejects mft_no >= 2^32. The free-MFT-record
bitmap scan in ntfs_mft_bitmap_find_and_alloc_free_rec_nolock() also
guards against this overflow but uses a strict greater than comparison,
allowing record number 2^32 itself through this earlier check.
Every other 2^32 boundary check in fs/ntfs/mft.c uses '>=', so the
strict greater than here is both a real off-by-one and an internal
inconsistency. A model with ll == 2^32 confirms the current check
accepts the value while the corrected check rejects it.
Use '>=' so the boundary matches the layout-time rejection and the
surrounding bitmap-scan checks.
DaeMyung Kang [Sat, 9 May 2026 06:12:35 +0000 (15:12 +0900)]
ntfs: validate MFT attrs_offset against bytes_in_use
ntfs_mft_record_check() verifies that attrs_offset is aligned and that
the resulting pointer stays within the allocated MFT record buffer, but
it does not check that the first attribute header starts within the
bytes_in_use area.
A malformed record with attrs_offset greater than bytes_in_use can pass
this check as long as attrs_offset is still within bytes_allocated. The
attribute parser then computes the remaining record space by subtracting
the attribute pointer from bytes_in_use. Because that value is unsigned,
the subtraction can underflow and allow bytes after bytes_in_use to be
interpreted as an attribute.
Reject records where attrs_offset is outside bytes_in_use or where the
used area does not even contain the four-byte attribute type/AT_END
terminator at attrs_offset.
A small userspace model with attrs_offset=128 and bytes_in_use=64 shows
the current check accepts the record and the parser space calculation
underflows to 0xffffffc0. With this change the same malformed record is
rejected before the attribute walker is entered.
Linus Torvalds [Sat, 9 May 2026 15:32:50 +0000 (08:32 -0700)]
Merge tag 'hwmon-for-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ads7871: Fix endianness bug in 16-bit register reads
- lm75: Fix configuration register writes and AS6200/TMP112 setup and
alarm handling
- lm63: Fix TOCTOU problems
- corsair-psu: Close HID device on probe errors
- ltc2992: Fix overflow and threshold range
- Documentation: fix link to ideapad-laptop.c file
- Remove stale CONFIG_SENSORS_SBRMI Makefile reference
* tag 'hwmon-for-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ads7871) Fix endianness bug in 16-bit register reads
hwmon: (lm75) Fix configuration register writes.
hwmon: (lm75) Fix AS6200 and TMP112 setup and alarm handling
hwmon: (lm63) Add locking to avoid TOCTOU
hwmon: (corsair-psu) Close HID device on probe errors
hwmon: Remove stale CONFIG_SENSORS_SBRMI Makefile reference
Documentation: hwmon: fix link to ideapad-laptop.c file
hwmon: (ltc2992) Fix u32 overflow in power read path
hwmon: (ltc2992) Clamp threshold writes to hardware range
Linus Torvalds [Sat, 9 May 2026 15:10:07 +0000 (08:10 -0700)]
Merge tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
Linus Torvalds [Sat, 9 May 2026 15:03:21 +0000 (08:03 -0700)]
Merge tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
Linus Torvalds [Sat, 9 May 2026 03:28:45 +0000 (20:28 -0700)]
Merge tag 'x86-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix memory map enumeration bug in the Xen e820 parsing code (Juergen
Gross)
- Re-enable e820 BIOS fallback if e820 table is empty (David Gow)
* tag 'x86-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/e820: Re-enable BIOS fallback if e820 table is empty
x86/xen: Fix a potential problem in xen_e820_resolve_conflicts()
Zhan Xusheng [Fri, 8 May 2026 07:29:34 +0000 (15:29 +0800)]
ntfs: fix missing kstrdup() error check in ntfs_write_volume_label()
ntfs_write_volume_label() does not check the return value of
kstrdup(). If the allocation fails, vol->volume_label is set to
NULL while the function returns success. A subsequent
FS_IOC_GETFSLABEL then returns an empty string even though the
on-disk label was updated correctly.
Fix by allocating the new label before taking vol_ni->mrec_lock and
updating any on-disk metadata, so an -ENOMEM from kstrdup() leaves
both the in-memory and on-disk labels untouched and consistent. On
success the preallocated copy replaces the old vol->volume_label.
Also move mark_inode_dirty_sync() into the success path so that it
is not called when no metadata was actually modified.
Fixes: 6251f0b0de7d ("ntfs: update super block operations") Suggested-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Linus Torvalds [Sat, 9 May 2026 02:42:10 +0000 (19:42 -0700)]
Merge tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
Linus Torvalds [Sat, 9 May 2026 02:39:18 +0000 (19:39 -0700)]
Merge tag 'perf-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix deadlock in the perf_mmap() failure path (Peter Zijlstra)
- Intel ACR (Auto Counter Reload) fixes (Dapeng Mi):
- Fix validation and configuration of ACR masks
- Fix ACR rescheduling bug causing stale masks
- Disable the PMI on ACR-enabled hardware
- Enable ACR on Panther Cover uarch too
* tag 'perf-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Enable auto counter reload for DMR
perf/x86/intel: Disable PMI for self-reloaded ACR events
perf/x86/intel: Always reprogram ACR events to prevent stale masks
perf/x86/intel: Improve validation and configuration of ACR masks
perf/core: Fix deadlock in perf_mmap() failure path
Holger Brunck [Thu, 7 May 2026 15:53:32 +0000 (17:53 +0200)]
net: wan: fsl_ucc_hdlc: free tx_skbuff in uhdlc_memclean
When the device is removed all allocated resources should be freed.
In uhdlc_memclean the netdev transmit queue was already stopped. But at
this point we may have pending skb in the transmit queue which must be
freed. Therefore iterate over the tx_skbuff pointers and free all
pending skb. The issue was discovered by sashiko.
Tested on a ls1043a board running HDLC in bus mode on kernel 6.12.
Jakub Kicinski [Sat, 9 May 2026 01:28:26 +0000 (18:28 -0700)]
Merge tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Allow initial x_tables table replacement without emitting an audit
log message. Delay the register message until after hooks are wired up
to avoid unnecessary unregister logs during error unwinding.
2) Fix a NULL dereference by allocating hook ops before adding the
table to the per-netns list. Use `synchronize_rcu()` during error
unwinding to ensure the table stops processing packets before
teardown. Defer audit log register message until all operations
succeed.
3) Refactor xtables to use a single `xt_unregister_table_pre_exit`
function. Eliminate code duplication by centralizing table
unregistration logic within the xtables core. ebtables cannot be
changed due to incompatibility.
4) Unregister xtables templates before module removal. This prevents
a race condition where userspace instantiates a new table after the
pernet unreg removed the current table.
5) Add `xtables_unregister_table_exit` to fully unregister netfilter
tables during module removal. Unlink the table from dying lists,
then free hook operations.
6) Implement a two-stage removal scheme for ebtables following the
x_tables pattern. Assign table->ops while holding the ebt mutex to
prevent exposing partially-filled structures.
7) Fix ebtables module initialization race. Register the template last
in table initialization functions. Prevent table instantiation before
pernet operations are available.
8) Fix a race condition in x_tables module initialization. Ensure
pernet ops are fully set up before exposing the table to userspace.
9) Fix a race condition in ebtables module initialization, similar to
previous patch.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Validate that the expectation tuple and mask netlink attributes are
present when adding expectation via nfqueue, this fixes a possible
null-ptr-deref.
12) Fix possible rare memleak in the SIP helper in case helper has been
detached from conntrack entry, from Li Xiasong.
13) Fix refcount leak in nft_ct when creating custom expectation, also
from Li Xiason.
Patches 1-9 from Florian Westphal.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Check that tuple and mask netlink attributes are set when creating an
expectation via nfqueue.
* tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: fix missing expect put in obj eval
netfilter: nf_conntrack_sip: get helper before allocating expectation
netfilter: ctnetlink: check tuple and mask in expectations created via nfqueue
netfilter: nf_conntrack_expect: restore helper propagation via expectation
netfilter: bridge: eb_tables: close module init race
netfilter: x_tables: close dangling table module init race
netfilter: ebtables: close dangling table module init race
netfilter: ebtables: move to two-stage removal scheme
netfilter: x_tables: add and use xtables_unregister_table_exit
netfilter: x_tables: unregister the templates first
netfilter: x_tables: add and use xt_unregister_table_pre_exit
netfilter: x_tables: allocate hook ops while under mutex
netfilter: x_tables: allow initial table replace without emitting audit log message
====================
Ben Morris [Fri, 8 May 2026 00:14:55 +0000 (17:14 -0700)]
sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL
The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with
list_for_each_entry_safe(), which caches the next entry in @tmp before
the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may
drop the socket lock inside sctp_wait_for_sndbuf().
While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the
association cached in @tmp, migrating it to a new endpoint via
sctp_sock_migrate() (list_del_init() + list_add_tail() to
newep->asocs), and optionally close the new socket which frees the
association via kfree_rcu(). The cached @tmp can also be freed by a
network ABORT for that association, processed in softirq while the
lock is dropped.
sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock
via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing
revalidates @tmp. After a successful return, the iterator advances to
the stale @tmp, yielding either a use-after-free (if the peeled socket
was closed) or a list-walk onto the new endpoint's list head (type
confusion of &newep->asocs as a struct sctp_association *).
Both are reachable from CapEff=0; the type-confusion path gives
controlled indirect call via the outqueue.sched->init_sid pointer.
Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc()
returns. @asoc is known to still be on ep->asocs at that point: the
only callers that list_del an association from ep->asocs are
sctp_association_free() (which sets asoc->base.dead) and
sctp_assoc_migrate() (which changes asoc->base.sk), and
sctp_wait_for_sndbuf() checks both under the lock before any
successful return; a tripped check propagates as err < 0 and the loop
bails before the re-derive.
The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the
loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so
the @tmp cached by list_for_each_entry_safe() still covers the
lock-held free that ba59fb027307 ("sctp: walk the list of asoc
safely") was added for.
Fixes: 4910280503f3 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg") Cc: stable@vger.kernel.org Signed-off-by: Ben Morris <bmorris@anthropic.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20260508001455.3137-1-joycathacker@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ti: icssm-prueth: fix eth_ports_node leak in probe
The error path on of_property_read_u32() failure inside
icssm_prueth_probe() returns without putting eth_ports_node,
which was acquired before the for_each_child_of_node() loop.
Myeonghun Pak [Wed, 6 May 2026 12:43:11 +0000 (21:43 +0900)]
net: lan966x: avoid unregistering netdev on register failure
lan966x_probe_port() stores the newly allocated net_device in the
port before calling register_netdev(). If register_netdev() fails,
the probe error path calls lan966x_cleanup_ports(), which sees
port->dev and calls unregister_netdev() for a device that was never
registered.
Destroy the phylink instance created for this port and clear port->dev
before returning the registration error. The common cleanup path now skips
ports without port->dev before reaching the registered netdev cleanup, so
it only handles ports that reached the registered-netdev lifetime.
This also avoids treating an uninitialized FDMA netdev and the failed port
as a NULL == NULL match in the common cleanup path.
Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Link: https://patch.msgid.link/20260506124331.31945-1-mhun512@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 8 May 2026 23:08:58 +0000 (16:08 -0700)]
Merge tag 'pci-v7.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Don't fallback to bus reset after failed slot reset; a bus reset
isn't safe if the .reset_slot() callback is implemented (Keith Busch)
- Update saved_config_space upon resource assignment to fix passthrough
regressions when x86 pcibios_assign_resources() updates BARs (Lukas
Wunner)
- Initialize a temporary pci_dev->dev in sysfs 'new_id' attribute to
fix a lockdep regression after driver_override was moved from PCI to
device core (Samiullah Khawaja)
- Update MAINTAINERS email addresses (Marek Vasut, Hans Zhang)
- Add MAINTAINERS reviewer for PCIe Cadence IP (Aksh Garg)
* tag 'pci-v7.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Aksh Garg as PCIe CADENCE reviewer
MAINTAINERS: Update Hans Zhang email for PCIe CIX Sky1
MAINTAINERS: Update Marek Vasut email for PCIe R-Car
PCI: Initialize temporary device in new_id_store()
PCI: Update saved_config_space upon resource assignment
PCI: Don't fallback to bus reset after failed slot reset
====================
Intel Wired LAN Driver Updates 2026-05-04 (i40e, ice, idpf)
Matt Volrath fixes two issues with the i40e driver probe routine, ensuring
that PTP is properly cleaned up if the probe fails.
Emil corrects the initialization of the read_dev_clk_lock spinlock in
idpf_ptp_init, ensuring it is initialized prior to when the
ptp_schedule_worker() is called.
Greg KH fixes a double free and use-after free in the idpf auxiliary device
error paths.
Marcin fixes ice_set_rss_hfunc() to use the correct q_opt_flags field,
correcting the assignment and preventing submission of invalid data to the
firmware.
Bart corrects the locking in ice_dcb_rebuild(), ensuring that the tc_mutex
is held over the entire operation.
Ivan fixes the rclk pin state get for E810 devices, ensuring the index is
properly offset by the base_rclk_idx value. This ensures that the correct
pin index is used to look up recovered clock state. He additionally adds
bounds checking to prevent attempting to access pins outside of the pin
state array.
Ivan also moves the CGU register macros to the top of ice_dpll.h, inside
the header guard to avoid duplicate macro definitions should the ice_dpll.h
header is included multiple times.
====================
Ivan Vecera [Wed, 6 May 2026 21:48:17 +0000 (14:48 -0700)]
ice: dpll: fix misplaced header macros
The CGU register definitions (ICE_CGU_R10, ICE_CGU_R11 and related field
masks) were placed after the #endif of the _ICE_DPLL_H_ include guard,
leaving them unprotected. Move them inside the guard.
Fixes: ad1df4f2d591 ("ice: dpll: Support E825-C SyncE and dynamic pin discovery") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-8-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Wed, 6 May 2026 21:48:16 +0000 (14:48 -0700)]
ice: dpll: fix rclk pin state get for E810
The refactoring of ice_dpll_rclk_state_on_pin_get() to use
ice_dpll_pin_get_parent_idx() omitted the base_rclk_idx adjustment that was
correctly added in the ice_dpll_rclk_state_on_pin_set() path. This breaks
E810 devices where base_rclk_idx is non-zero, causing the wrong hardware
index to be used for pin state lookup and incorrect recovered clock state
to be reported via the DPLL subsystem. E825C is unaffected as its
base_rclk_idx is 0.
While at it, add bounds check against ICE_DPLL_RCLK_NUM_MAX on hw_idx after
the base_rclk_idx subtraction in both ice_dpll_rclk_state_on_pin_{get,set}()
to prevent out-of-bounds access on the pin state array.
Fixes: ad1df4f2d591 ("ice: dpll: Support E825-C SyncE and dynamic pin discovery") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-7-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bart Van Assche [Wed, 6 May 2026 21:48:15 +0000 (14:48 -0700)]
ice: fix locking in ice_dcb_rebuild()
Move the mutex_lock() call up to prevent that DCB settings change after
the first ice_query_port_ets() call. The second ice_query_port_ets()
call in ice_dcb_rebuild() is already protected by pf->tc_mutex.
This also fixes a bug in an error path, as before taking the first
"goto dcb_error" in the function jumped over mutex_lock() to
mutex_unlock().
This bug has been detected by the clang thread-safety analyzer.
Cc: intel-wired-lan@lists.osuosl.org Fixes: 242b5e068b25 ("ice: Fix DCB rebuild after reset") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-6-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marcin Szycik [Wed, 6 May 2026 21:48:14 +0000 (14:48 -0700)]
ice: fix setting RSS VSI hash for E830
ice_set_rss_hfunc() performs a VSI update, in which it sets hashing
function, leaving other VSI options unchanged. However, ::q_opt_flags is
mistakenly set to the value of another field, instead of its original
value, probably due to a typo. What happens next is hardware-dependent:
On E810, only the first bit is meaningful (see
ICE_AQ_VSI_Q_OPT_PE_FLTR_EN) and can potentially end up in a different
state than before VSI update.
On E830, some of the remaining bits are not reserved. Setting them
to some unrelated values can cause the firmware to reject the update
because of invalid settings, or worse - succeed.
Reproducer:
sudo ethtool -X $PF1 equal 8
Output in dmesg:
Failed to configure RSS hash for VSI 6, error -5
Fixes: 352e9bf23813 ("ice: enable symmetric-xor RSS for Toeplitz hash function") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-5-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf: fix double free and use-after-free in aux device error paths
When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or
idpf_plug_core_aux_dev(), the err_aux_dev_add label calls
auxiliary_device_uninit() and falls through to err_aux_dev_init. The
uninit call will trigger put_device(), which invokes the release
callback (idpf_vport_adev_release / idpf_core_adev_release) that frees
iadev. The fall-through then reads adev->id from the freed iadev for
ida_free() and double-frees iadev with kfree().
Free the IDA slot and clear the back-pointer before uninit, while adev
is still valid, then return immediately.
Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization")
fixed the same use-after-free in the matching unplug path in this file but
missed both probe error paths.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: stable@kernel.org Fixes: be91128c579c ("idpf: implement RDMA vport auxiliary dev create, init, and destroy") Fixes: f4312e6bfa2a ("idpf: implement core RDMA auxiliary dev create, init, and destroy") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-4-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Emil Tantilov [Wed, 6 May 2026 21:48:12 +0000 (14:48 -0700)]
idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init()
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized.
Fixes: 5cb8805d2366 ("idpf: negotiate PTP capabilities and get PTP clock") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-3-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matt Vollrath [Wed, 6 May 2026 21:48:10 +0000 (14:48 -0700)]
i40e: Cleanup PTP registration on probe failure
Fix two conditions which would leak PTP registration on probe failure:
1. i40e_setup_pf_switch can encounter an error in
i40e_setup_pf_filter_control, call i40e_ptp_init, then return
non-zero, sending i40e_probe to err_vsis.
2. i40e_setup_misc_vector can return non-zero, sending i40e_probe to
err_vsis.
Both of these conditions have been present since PTP was introduced in
this driver.
Found with coccinelle.
Fixes: beb0dff1251db ("i40e: enable PTP") Signed-off-by: Matt Vollrath <tactii@gmail.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-1-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / thirdparty / linux.git / log
