During GPU reset, the application could still run CPU page table updates. Each commit called
amdgpu_device_flush_hdp(), which on SR-IOV sends work through the KIQ ring.
That can advance sync_seq while the GPU is being reset,
leaving fence writeback out of sync and causing amdgpu_fence_emit_polling()
to time out on later KIQ use.
Fix:
amdgpu_vm_cpu_commit():
Reset will flush HDP anyway, the HDP flush in amdgpu_vm_cpu_commit() can be skipped
when a reset is ongoging.
Take reset_domain->sem with down_read_trylock() before amdgpu_device_flush_hdp().
If the reset path holds the write lock, skip the HDP flush so no HDP-related HW
access (including KIQ) runs during reset; state is re-established after reset.
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
drm/amdgpu: Remove sys file compute_partition_mem_alloc_mode at module unload
Module reload would fail when create sys file that was not removed during
module unload.
Fixes: e0e9792ea2d4 ("drm/amdgpu: add an option to allow gpu partition allocate all available memory") Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Fri, 3 Apr 2026 02:44:29 +0000 (22:44 -0400)]
drm/amd/pm: fix incorrect FeatureCtrlMask setting on smu v14.0.x
OverDriveTable.FanMinimumPwm and FeatureCtrlMask.PP_OD_FEATURE_FAN_LEGACY_BIT
have a hard dependency.
Invalid handling of this dependency leads to disabled thermal monitoring
and temperature boundary validation.
v2: squash in typo fix (Yang)
Fixes: 9710b84e2a6a ("drm/amd/pm: add overdrive support on smu v14.0.2/3") Cc: stable@vger.kernel.org Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge tag 'for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- S2MU005: new battery fuel gauge driver
- macsmc-power: new driver for Apple Silicon
- qcom_battmgr: Add support for Glymur and Kaanapali
- max17042: add support for max77759
- qcom_smbx: allow disabling charging
- bd71828: add input current limit support
- multiple drivers: use new device managed workqueue allocation
function
- misc small cleanups and fixes
Reset core:
- Expose sysfs for registered reboot_modes
Reset drivers
- misc small cleanups and fixes"
* tag 'for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (36 commits)
power: supply: qcom_smbx: allow disabling charging
power: reset: drop unneeded dependencies on OF_GPIO
power: supply: bd71828: add input current limit property
dt-bindings: power: reset: cortina,gemini-power-controller: convert to DT schema
power: supply: add support for S2MU005 battery fuel gauge device
dt-bindings: power: supply: document Samsung S2MU005 battery fuel gauge
power: reset: reboot-mode: fix -Wformat-security warning
power: supply: ipaq_micro: Simplify with devm
power: supply: mt6370: Simplify with devm_alloc_ordered_workqueue()
power: supply: max77705: Free allocated workqueue and fix removal order
power: supply: max77705: Drop duplicated IRQ error message
power: supply: cw2015: Free allocated workqueue
power: reset: keystone: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
power: supply: twl4030_madc: Drop unused header includes
power: supply: bq24190: Avoid rescheduling after cancelling work
power: supply: axp288_charger: Simplify returns of dev_err_probe()
power: supply: axp288_charger: Do not cancel work before initializing it
power: supply: cpcap-battery: pass static battery cell data from device tree
dt-bindings: power: supply: cpcap-battery: document monitored-battery property
power: supply: qcom_battmgr: Add support for Glymur and Kaanapali
...
sched_ext: Print sub-scheduler disabled log and reason
Take scx_qmap for example, when sub scheduler is attached, there is
'BPF sub-scheduler "qmap" enabled' message, but when detached, the log
is missing. Add a new function to do the log thing, it can be used by
both root scheduler and sub scheduler.
tools/sched_ext: Handle migration-disabled tasks in scx_central
When a task calls migrate_disable(), p->cpus_ptr is not updated until
migrate_disable_switch() runs during context switch, so dispatch_to_cpu()
may dequeue such a task and dispatch it to a CPU it cannot run on.
Extend the mismatch check in dispatch_to_cpu() to also test
is_migration_disabled() alongside the cpumask check, so tasks in this
window are bounced to the fallback DSQ.
Suggested-by: Andrea Righi <arighi@nvidia.com> Suggested-by: Tejun Heo <tj@kernel.org> Suggested-by: Kuba Piecuch <jpiecuch@google.com> Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com> Reviewed-by: Kuba Piecuch <jpiecuch@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Merge tag 'hsi-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- use flexible array member for hsi_port in hsi_controller
- misc small fixes
* tag 'hsi-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_port: remove depends on ARM
HSI: omap_ssi_port: remove set but unused variables
HSI: cmt_speech: fix wrong printf format
HSI: omap_ssi_port: remove null check from FAM
hsi: hsi_core: use kzalloc_flex
Enable HWMON energy attributes for CRI, which are available through MMIO
registers.
Although these attributes can also be accessed via PMT, MMIO is preferred
as it avoids dependency on ocode firmware load in late binding scenario.
Merge tag 'hid-for-linus-2026041601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
"Core:
- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)
Drivers:
- support for rumble effects in winwing driver (Ivan Gorinov)
- new support for a variety of Sony Rock Band and Sony DJ Hero
Turntable devices (Rosalie Wanders)
- new driver for Lenovo Legion Go / S devices (Derek J. Clark)
- power management improvements to intel-thc-hid driver (Even Xu)
... other assorted cleanups, fixes and device-specific quirks"
* tag 'hid-for-linus-2026041601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (73 commits)
HID: core: clamp report_size in s32ton() to avoid undefined shift
HID: logitech-dj: fix wrong detection of bad DJ_SHORT output report
HID: logitech-hidpp: fix race condition when accessing stale stack pointer
HID: winwing: Enable rumble effects
HID: core: do not allow parsing 0-sized reports
HID: usbhid: refactor endpoint lookup
HID: huawei: fix CD30 keyboard report descriptor issue
HID: playstation: validate num_touch_reports in DualShock 4 reports
HID: drop 'default !EXPERT' from tristate symbols
HID: usbhid: fix deadlock in hid_post_reset()
HID: apple: ensure the keyboard backlight is off if suspending
HID: quirks: Set ALWAYS_POLL for LOGITECH_BOLT_RECEIVER
HID: alps: fix NULL pointer dereference in alps_raw_event()
HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write
HID: logitech-dj: Standardise hid_report_enum variable nomenclature
HID: sony: update module description
HID: logitech-hidpp: Check bounds when deleting force-feedback effects
HID: sony: add battery status support for Rock Band 4 PS5 guitars
HID: sony: fix style issues
HID: quirks: update hid-sony supported devices
...
Merge tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
Mark Brown [Fri, 17 Apr 2026 16:57:50 +0000 (17:57 +0100)]
selftests: Fix duplicated test number reporting
Commit 2964f6b816c2 ("selftests: Use ktap helpers for runner.sh") converted
the prints in runner.sh to use the relevant helpers from ktap_helpers.sh,
not modifying any of the strings printed in the process. This included
converting all the result reports to use the relevant ktap_test_ function.
Since the output was originally KTAP compliant the strings reported for
test names now include test numbers:
ok 59 59 selftests: arm64: syscall-abi
instead of the expected format:
ok 59 selftests: arm64: syscall-abi
which causes result parsers to interpret the second number as part of the
test name.
Given the use of the helpers the tracking of test numbers by runner.sh is
now redundant, remove it entirely to restore the expected output format.
cgroup/rdma: fix integer overflow in rdmacg_try_charge()
The expression `rpool->resources[index].usage + 1` is computed in int
arithmetic before being assigned to s64 variable `new`. When usage equals
INT_MAX (the default "max" value), the addition overflows to INT_MIN.
This negative value then passes the `new > max` check incorrectly,
allowing a charge that should be rejected and corrupting usage to
negative.
Fix by casting usage to s64 before the addition so the arithmetic is
done in 64-bit.
sched/psi: fix race between file release and pressure write
A potential race condition exists between pressure write and cgroup file
release regarding the priv member of struct kernfs_open_file, which
triggers the uaf reported in [1].
Consider the following scenario involving execution on two separate CPUs:
The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards
the memory deallocation of of->priv performed within cgroup_file_release().
However, the operations involving of->priv executed within pressure_write()
are not entirely covered by the protection of cgroup_mutex. Consequently,
if the code in pressure_write(), specifically the section handling the
ctx variable executes after cgroup_file_release() has completed, a uaf
vulnerability involving of->priv is triggered.
Therefore, the issue can be resolved by extending the scope of the
cgroup_mutex lock within pressure_write() to encompass all code paths
involving of->priv, thereby properly synchronizing the race condition
occurring between cgroup_file_release() and pressure_write().
And, if an live kn lock can be successfully acquired while executing
the pressure write operation, it indicates that the cgroup deletion
process has not yet reached its final stage; consequently, the priv
pointer within open_file cannot be NULL. Therefore, the operation to
retrieve the ctx value must be moved to a point *after* the live kn
lock has been successfully acquired.
In another situation, specifically after entering cgroup_kn_lock_live()
but before acquiring cgroup_mutex, there exists a different class of
race condition:
... acquires cgroup_mutex
ctx = of->priv; // may now be NULL
if (ctx->psi.trigger) // NULL dereference
Consequently, there is a possibility that of->priv is NULL, the pressure
write needs to check for this.
Now that the scope of the cgroup_mutex has been expanded, the original
explicit cgroup_get/put operations are no longer necessary, this is
because acquiring/releasing the live kn lock inherently executes a
cgroup get/put operation.
Merge tag 'phy-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Eliza QMP UFS PHY
- Canaan K230 USB 2.0 PHY driver
- Mediatek mt8167 dsi-phy
- Eswin EIC7700 SATA PHY driver
Updates:
- Sorted subsytem Makefile/Kconfig and some kernel-doc udpates"
* tag 'phy-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the Eliza QMP UFS PHY
phy: qcom: m31-eusb2: clear PLL_EN during init
phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver
dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY
phy: apple: apple: Use local variable for ioremap return value
phy: qcom: qmp-usbc: Simplify check for non-NULL pointer
phy: marvell: mmp3-hsic: Avoid re-casting __iomem
phy: apple: atc: Make atcphy_dwc3_reset_ops variable static
dt-bindings: phy: mediatek,dsi-phy: Add support for mt8167
phy: usb: Add driver for Canaan K230 USB 2.0 PHY
dt-bindings: phy: Add Canaan K230 USB PHY
phy: phy-mtk-tphy: Update names and format of kernel-doc comments
phy: Sort the subsystem Kconfig
phy: Sort the subsystem Makefile
phy: move spacemit pcie driver to its subfolder
Merge tag 'soundwire-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core: DP prepare polling for avoiding interrupt deadlock
- AMD clock init and bandwidth refactoring
- Intel more codecs to wake list, clear message on before signaling
waiting thread
* tag 'soundwire-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_auxdevice: Add cs42l49 to wake_capable_list
soundwire: cadence: Clear message complete before signaling waiting thread
soundwire: Intel: test bus.bpt_stream before assigning it
soundwire: bus: demote UNATTACHED state warnings to dev_dbg()
soundwire: stream: Poll for DP prepare to avoid interrupt deadlock
soundwire: amd: refactor bandwidth calculation logic
soundwire: amd: add clock init control function
soundwire: intel_auxdevice: Add CS47L47 to wake_capable_list
soundwire: slave: Don't register devices that are disabled in ACPI
soundwire: sdw.h: repair names and format of kernel-doc comments
Merge tag 'trace-latency-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing latency update from Steven Rostedt:
- Add TIMERLAT_ALIGN osnoise option
Add a timer alignment option for timerlat that makes it work like the
cyclictest -A option. timelat creates threads to test the latency of
the kernel. The alignment option will have these threads trigger at
the alignment offsets from each other. Instead of having each thread
wake up at the exact same time, if the alignment is set to "20" each
thread will wake up at 20 microseconds from the previous one.
* tag 'trace-latency-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/osnoise: Add option to align tlat threads
Ben Horgan [Tue, 14 Apr 2026 13:27:56 +0000 (14:27 +0100)]
arm_mpam: resctrl: Fix the check for no monitor components found
Dan Carpenter reports that, in mpam_resctrl_alloc_domain(), any_mon_comp is
used in an 'if' condition when it may be uninitialized. Initialize it to
NULL so that the check behaves correctly when no monitor components are
found.
Reported-by: Dan Carpenter <error27@gmail.com> Fixes: 264c285999fc ("arm_mpam: resctrl: Add monitor initialisation and domain boilerplate") Signed-off-by: Ben Horgan <ben.horgan@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: James Morse <james.morse@arm.com>
arm_mpam: resctrl: Fix MBA CDP alloc_capable handling on unmount
The code to set MBA's alloc_capable to true appears to be trying to
restore alloc_capable on unmount. This can never work because
resctrl_arch_set_cdp_enabled() is never invoked with RDT_RESOURCE_MBA
as the rid parameter. Consequently,
mpam_resctrl_controls[RDT_RESOURCE_MBA].cdp_enabled always remains false.
The alloc_capable setting in resctrl_arch_set_cdp_enabled() is to
re-enable MBA if the caller opts in to separate control values using
CDP for this resource. This doesn't happen today.
Add a comment to describe this.
However a bug remains where MBA allocation is permanently disabled after
the mount with CDP option. Remounting without CDP cannot restore the MBA
partition capability.
Add a check to re-enable MBA when CDP is disabled, which happens on
unmount.
Fixes: 6789fb99282c ("arm_mpam: resctrl: Add CDP emulation") Signed-off-by: Zeng Heng <zengheng4@huawei.com>
[ morse: Added comment for existing code, added hunk to fix this bug from
Ben H ] Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: James Morse <james.morse@arm.com>
Merge tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
Merge tag 'bootconfig-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
"Minor fixes for handling errors:
- fix off-by-one in xbc_verify_tree() next node check
- increment xbc_node_num after node init succeeds
- validate child node index in xbc_verify_tree()
Code cleanups (mainly type/attribute changes):
- clean up comment typos and bracing
- drop redundant memset of xbc_nodes
- replace linux/kernel.h with specific includes
- narrow flag parameter type from uint32_t to uint16_t
- constify xbc_calc_checksum() data parameter
- fix signed comparison in xbc_node_get_data()
- use size_t for strlen result in xbc_node_match_prefix()
- use signed type for offset in xbc_init_node()
- use size_t for key length tracking in xbc_verify_tree()
- change xbc_node_index() return type to uint16_t"
* tag 'bootconfig-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
lib/bootconfig: change xbc_node_index() return type to uint16_t
lib/bootconfig: use size_t for key length tracking in xbc_verify_tree()
lib/bootconfig: use signed type for offset in xbc_init_node()
lib/bootconfig: use size_t for strlen result in xbc_node_match_prefix()
lib/bootconfig: fix signed comparison in xbc_node_get_data()
lib/bootconfig: validate child node index in xbc_verify_tree()
lib/bootconfig: replace linux/kernel.h with specific includes
bootconfig: constify xbc_calc_checksum() data parameter
lib/bootconfig: drop redundant memset of xbc_nodes
lib/bootconfig: increment xbc_node_num after node init succeeds
lib/bootconfig: fix off-by-one in xbc_verify_tree() next node check
lib/bootconfig: narrow flag parameter type from uint32_t to uint16_t
lib/bootconfig: clean up comment typos and bracing
Max Zhen [Thu, 16 Apr 2026 20:11:06 +0000 (13:11 -0700)]
accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer
The management mailbox channel cleanup helpers can be called from
error handling paths when mgmt_chann has already been destroyed.
Add NULL checks to xdna_mailbox_free_channel() and
xdna_mailbox_stop_channel() so the cleanup path safely returns instead
of dereferencing a NULL mailbox channel pointer.
Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Max Zhen <max.zhen@amd.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20260416201106.1046072-1-lizhi.hou@amd.com
Max Zhen [Thu, 16 Apr 2026 19:01:50 +0000 (12:01 -0700)]
accel/amdxdna: Get device revision to derive VBNV string
Add support for querying the device revision from firmware.
Use the returned revision to look up the VBNV string during device
initialization, and fall back to the default VBNV when the revision
query is not supported or no mapping is found.
This allows the driver to report the accurate VBNV for devices that
share the same vendor/device ID but differ by hardware revision.
Cássio Gabriel [Fri, 17 Apr 2026 13:41:33 +0000 (10:41 -0300)]
ALSA: caiaq: Fix control_put() result and cache rollback
control_put() always returns 1 and updates cdev->control_state[]
before sending the USB command. It also ignores transport errors
from usb_bulk_msg(), snd_usb_caiaq_send_command(), and
snd_usb_caiaq_send_command_bank().
That breaks the ALSA .put() contract and can leave control_get()
reporting a cached value the device never accepted.
Return 0 for unchanged values, propagate transport failures,
and restore the cached byte when the write fails.
Karthik Poosa [Mon, 23 Mar 2026 11:58:36 +0000 (17:28 +0530)]
drm/xe/hwmon: Read accepted power limit for CRI
Update xe_hwmon_pcode_read_power_limit() and
xe_hwmon_pcode_rmw_power_limit() to read the accepted power limit for
discrete platforms post CRI.
For platforms before CRI only the last written pcode value was available.
From CRI onwards, pcode exposes a new param2 value 2 that allows reading
the accepted power limit by the hardware.
v2:
- Read resolved power limit in xe_hwmon_pcode_rmw_power_limit()
as well. (Badal)
- Rephrase commit message. (Badal)
- Add prepare_power_limit_param2() to prepare param2 for mailbox power
limit read.
Merge tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha updates from Magnus Lindholm:
"One fix to silence pgprot_modify() compiler warnings, and one patch
adding SECCOMP/SECCOMP_FILTER support together with the syscall and
ptrace fixes needed for it"
* tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha:
alpha: Define pgprot_modify to silence tautological comparison warnings
alpha: add support for SECCOMP and SECCOMP_FILTER
Michael Margolin [Thu, 16 Apr 2026 20:14:08 +0000 (20:14 +0000)]
RDMA/core: Fix user CQ creation for drivers without create_cq
CQ creation is failing for drivers that only implement create_user_cq
(e.g. EFA), when buffer isn't provided by userspace. This because of a
leftover check that requires create_cq existence in such case.
Remove the create_cq existence check from the no-buffer path. The
buffer is optional and drivers that handle their own memory should work
through create_user_cq regardless.
Matt Roper [Thu, 16 Apr 2026 21:17:09 +0000 (14:17 -0700)]
drm/xe: Drop skip_mtcfg descriptor flag
The skip_mtcfg descriptor flag is unused and expected to remain that
way. Drop it.
Single-tile platforms are already identified by a zero/unset value for
max_remote_tiles and don't need/use this flag to avoid trying to read
out multi-tile configuration. PVC is currently the only multi-tile
platform, and PVC uses MTCFG so this flag is not set. The current
expectation is that if/when future multi-tile platforms show up, they
will also use the MTCFG register in the same manner as PVC, meaning that
they won't have any need to set 'skip_mtcfg' either.
Even if a future platform does change how multi-tile configuration gets
probed (e.g., using some different register), simply doing an early return
from xe_info_probe_tile_count() would probably not be the correct logic
to handle that anyway.
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
drm/panel: visionox-rm69299: Make use of prepare_prev_first
The DSI link must be powered up to let panel driver to talk to the panel
during prepare() callback execution. Set the prepare_prev_first flag to
guarantee this.
Fixes: 9e15123eca79 ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset") Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patch.msgid.link/20260417-axolotl-display-v2-1-8ce5341e46c2@ixit.cz
Guangshuo Li [Wed, 15 Apr 2026 17:05:15 +0000 (01:05 +0800)]
parisc: led: fix reference leak on failed device registration
When platform_device_register() fails in startup_leds(), the embedded
struct device in platform_leds has already been initialized by
device_initialize(), but the failure path only reports the error and
does not drop the device reference for the current platform device:
module.lds.S: Fix modules on 32-bit parisc architecture
On the 32-bit parisc architecture, we always used the
-ffunction-sections compiler option to tell the compiler to put the
functions into seperate text sections. This is necessary, otherwise
"big" kernel modules like ext4 or ipv6 fail to load because some
branches won't be able to reach their stubs.
Commit 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related
macros") broke this for parisc because all text sections will get
unconditionally merged now.
Introduce the ARCH_WANTS_MODULES_TEXT_SECTIONS config option which
avoids the text section merge for modules, and fix this issue by
enabling this option by default for 32-bit parisc.
Fixes: 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros") Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: stable@vger.kernel.org # v6.19+ Suggested-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Helge Deller <deller@gmx.de>
parisc: Fix signal code to depend on CONFIG_COMPAT instead of CONFIG_64BIT
The signal handler code used CONFIG_64BIT to decide if compat handling
code should be compiled in. Fix it to use CONFIG_COMPAT instead.
This allows to disable CONFIG_COMPAT even when running a 64-bit kernel.
Zen1's hardware divider can leave, under certain circumstances, partial
results from previous operations. Those results can be leaked by
another, attacker thread.
Remove member no longer used by the scheduler core.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-20-tvrtko.ursulin@igalia.com
Remove member no longer used by the scheduler core.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: amd-gfx@lists.freedesktop.org Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-19-tvrtko.ursulin@igalia.com
drm/sched: Embed run queue singleton into the scheduler
Now that the run queue to scheduler relationship is always 1:1 we can
embed it (the run queue) directly in the scheduler struct and save on
some allocation error handling code and such.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-15-tvrtko.ursulin@igalia.com
drm/sched: Remove FIFO and RR and simplify to a single run queue
Since the new FAIR policy is in general better than FIFO and almost as
good as round-robin in interactive use cases, plus the latter has not been
the default policy in a long time, we can afford to remove both and leave
just FAIR.
By doing so we can simplify the scheduler code by making the scheduler to
run queue relationship always 1:1 and remove some code.
Also, now that the FIFO policy is gone the tree of entities is not a FIFO
tree any more so rename it to just the tree.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-14-tvrtko.ursulin@igalia.com
FAIR policy works better than FIFO for all known use cases and either
matches or gets close to RR. Lets make it a default to improve the user
experience especially with interactive workloads competing with heavy
clients.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-13-tvrtko.ursulin@igalia.com
GPUs do not always implement preemption and DRM scheduler definitely
does not support it at the front end scheduling level. This means
execution quanta can be quite long and is controlled by userspace,
consequence of which is picking the "wrong" entity to run can have a
larger negative effect than it would have with a virtual runtime based CPU
scheduler.
Another important consideration is that rendering clients often have
shallow submission queues, meaning they will be entering and exiting the
scheduler's runnable queue often.
Relevant scenario here is what happens when an entity re-joins the
runnable queue with other entities already present. One cornerstone of the
virtual runtime algorithm is to let it re-join at the head and rely on the
virtual runtime accounting and timeslicing to sort it out.
However, as explained above, this may not work perfectly in the GPU world.
Entity could always get to overtake the existing entities, or not,
depending on the submission order and rbtree equal key insertion
behaviour.
Allow interactive jobs to overtake entities already queued up for the
limited case when interactive entity is re-joining the queue after
being idle.
This gives more opportunity for the compositors to have their rendering
executed before the GPU hogs even if they have been configured with the
same scheduling priority.
To classify a client as interactive we look at its average job duration
versus the average for the whole scheduler. We can track this easily by
plugging into the existing job runtime tracking and applying the
exponential moving average window on the past submissions. Then, all other
things being equal, we let the more interactive jobs go first.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-12-tvrtko.ursulin@igalia.com
The FAIR scheduling policy is built upon the same concepts as the well
known CFS CPU scheduler - entity run queue is sorted by the virtual GPU
time consumed by entities in a way that the entity with least vruntime
runs first.
It is able to avoid total priority starvation, which is one of the
problems with FIFO, and it also does not need for per priority run queues.
As it scales the actual GPU runtime by an exponential factor as the
priority decreases, the virtual runtime for low priority entities grows
faster than for normal priority, pushing them further down the runqueue
order for the same real GPU time spent.
Apart from this fundamental fairness, fair policy is especially strong in
oversubscription workloads where it is able to give more GPU time to short
and bursty workloads when they are running in parallel with GPU heavy
clients submitting deep job queues.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-11-tvrtko.ursulin@igalia.com
There is no need to keep entities with no jobs in the tree so lets remove
it once the last job is consumed. This keeps the tree smaller which is
nicer and more efficient as entities are removed and re-added on every
popped job.
Apart from that, the upcoming fair scheduling algorithm will rely on the
tree only containing runnable entities.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-10-tvrtko.ursulin@igalia.com
To implement fair scheduling we need a view into the GPU time consumed by
entities. Problem we have is that jobs and entities objects have decoupled
lifetimes, where at the point we have a view into accurate GPU time, we
cannot link back to the entity any longer.
Solve this by adding a light weight entity stats object which is reference
counted by both entity and the job and hence can safely be used from
either side.
With that, the only other thing we need is to add a helper for adding the
job's GPU time into the respective entity stats object, and call it once
the accurate GPU time has been calculated.
The most convenient place to do that is the free job worker for several
reasons. Doing the accounting from the job completion callback would mean
a few locks would need to become irq safe and we would also need to worry
about out of order completions (via dma_fence_is_signaled calls which we
cannot control). In-order completions are critical for GPU time accuracy
which is currently adjusted per fence in the free worker and requires
looking at the next job in the scheduler pending list. We would also need
to add a new lock to protect the scheduler average stats update.
In contrast to those complications, having the accounting done from the
free worker is serialized by definition and all the above complications
are avoided. Downside is there is potential for a time lag between job
completions and GPU time being accounted against the entity. Since that is
partly alleviated by batch processing the completed job queue, and the
scheduling algorithm does not attempt to be completely fair, which would
even be rather impossible to achieve in the GPU world with the current
DRM scheduler design and hardware with no or poor preemption support,
this downside is not considered critical. Plus, in practice the scheduler
is also affected by worker scheduling delays from other angles too. Not
least being able to promptly feed the GPU with new work.
We therefore choose the simple option and can later consider improving
upon it if the need arises.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-9-tvrtko.ursulin@igalia.com
To implement fair scheduling we will need as accurate as possible view
into per entity GPU time utilisation. Because sched fence execution time
are only adjusted for accuracy in the free worker we need to process
completed jobs as soon as possible so the metric is most up to date when
view from the submission side of things.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-8-tvrtko.ursulin@igalia.com
Round-robin being the non-default policy and unclear how much it is used,
we can notice that it can be implemented using the FIFO data structures if
we only invent a fake submit timestamp which is monotonically increasing
inside drm_sched_rq instances.
So instead of remembering which was the last entity the scheduler worker
picked we can simply bump the picked one to the bottom of the tree, which
ensures round-robin behaviour between all active queued jobs.
If the picked job was the last from a given entity, we remember the
assigned fake timestamp and use it to re-insert the job once it re-joins
the queue. This ensures the job neither overtakes all already queued jobs,
neither it goes last. Instead it keeps the position after the currently
queued jobs and before the ones which haven't yet been queued at the point
the entity left the queue.
Advantage is that we can consolidate to a single code path and remove a
bunch of code. Downside is round-robin mode now needs to lock on the job
pop path but that should not have a measurable performance impact.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-7-tvrtko.ursulin@igalia.com
Every 100ms for the duration of the test it logs how many jobs each
client had completed, prefixed by minimum, average and maximum numbers.
When finished overall average delta between max and min is output as a
rough indicator to scheduling fairness.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-6-tvrtko.ursulin@igalia.com
To make evaluating different scheduling policies easier (no need for
external benchmarks) and perfectly repeatable, lets add some synthetic
workloads built upon mock scheduler unit test infrastructure.
Focus is on two parallel clients (two threads) submitting different job
patterns and logging their progress and some overall metrics. This is
repeated for both scheduler credit limit 1 and 2.
There we have two clients represented in the two respective columns, with
their progress logged roughly every 100 milliseconds. The metrics are:
- pct - Percentage progress of the job submit part
- cps - Cycles per second
- qd - Queue depth - number of submitted unfinished jobs
The cycles per second metric is inherent to the fact that workload
patterns are a data driven cycling sequence of:
- Submit 1..N jobs
- Wait for Nth job to finish (optional)
- Sleep (optional)
- Repeat from start
In this particular example we have a normal priority and a low priority
client both spamming the scheduler with 8ms jobs with no sync and no
sleeping. Hence they build very deep queues and we can see how the low
priority client is completely starved until the normal finishes.
Note that the PCT and CPS metrics are irrelevant for "unsync" clients
since they manage to complete all of their cycles instantaneously.
In this case client one is submitting 3x 2.5ms jobs, waiting for the 3rd
and then sleeping for 2.5ms (in effect causing 75% GPU load, minus the
overheads). Second client is submitting 1ms jobs, waiting for each to
finish and sleeping for 9ms (effective 10% GPU load). Here we can see
the PCT and CPS reflecting real progress.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-5-tvrtko.ursulin@igalia.com
drm/sched: Move run queue related code into a separate file
Lets move all the code dealing with struct drm_sched_rq into a separate
compilation unit. Advantage being sched_main.c is left with a clearer set
of responsibilities.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Reviewed-by: Matthew Brost <matthew.brost@intel.com> # v1 Acked-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-4-tvrtko.ursulin@igalia.com
drm/sched: Disallow initializing entities with no schedulers
Since we have removed the case where amdgpu was initializing entitites
with either no schedulers on the list, or with a single NULL scheduler,
and there appears no other drivers which rely on this, we can simplify the
scheduler by explicitly rejecting that early.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Philipp Stanner <phasta@kernel.org> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260417103744.76020-2-tvrtko.ursulin@igalia.com
Junrui Luo [Wed, 15 Apr 2026 09:26:55 +0000 (17:26 +0800)]
KVM: s390: pci: fix GAIT table indexing due to double-scaling pointer arithmetic
kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and
aen_host_forward() index the GAIT by manually multiplying the index
with sizeof(struct zpci_gaite).
Since aift->gait is already a struct zpci_gaite pointer, this
double-scales the offset, accessing element aisb*16 instead of aisb.
This causes out-of-bounds accesses when aisb >= 32 (with
ZPCI_NR_DEVICES=512)
Fix by removing the erroneous sizeof multiplication.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Fixes: 73f91b004321 ("KVM: s390: pci: enable host forwarding of Adapter Event Notifications") Reported-by: Yuhao Jiang <danisjiang@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo <moonafterrain@outlook.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
regmap: ram: fix memory leaks in __regmap_init_ram() on error
Two allocations in __regmap_init_ram() are not cleaned up on failure.
If the kzalloc_objs() for data->written fails, data->read is returned
with no way for the caller to free it.
If __regmap_init() fails, neither data->read nor data->written is freed
because its error paths do not call bus->free_context() (which is
regmap_ram_free_context() here). Only regmap_exit() does, and that is
never reached on an init failure.
Free the allocated arrays before returning any error.
parisc: Drop ip_fast_csum() inline assembly implementation
The assembly code of ip_fast_csum() triggers unaligned access warnings
if the IP header isn't correctly aligned:
Kernel: unaligned access to 0x173d22e76 in inet_gro_receive+0xbc/0x2e8 (iir 0x0e8810b6)
Kernel: unaligned access to 0x173d22e7e in inet_gro_receive+0xc4/0x2e8 (iir 0x0e88109a)
Kernel: unaligned access to 0x173d22e82 in inet_gro_receive+0xc8/0x2e8 (iir 0x0e90109d)
Kernel: unaligned access to 0x173d22e7a in inet_gro_receive+0xd0/0x2e8 (iir 0x0e9810b8)
Kernel: unaligned access to 0x173d22e86 in inet_gro_receive+0xdc/0x2e8 (iir 0x0e8810b8)
We have the option to a) ignore the warnings, b) work around it by
adding more code to check for alignment, or c) to switch to the generic
implementation and rely on the compiler to optimize the code.
Let's go with c), because a) isn't nice, and b) would effectively lead
to an implementation which is basically equal to c).
Kexin Sun [Sat, 21 Mar 2026 10:58:31 +0000 (18:58 +0800)]
parisc: update outdated comments for renamed ccio_alloc_consistent()
The function ccio_alloc_consistent() was renamed to ccio_alloc() by commit 79387179e2e4 ("parisc: convert to dma_map_ops"). Update the three stale
references in ccio-dma.c.
Also replace the obsolete PCI_DMA_TODEVICE constant name with DMA_TO_DEVICE in
a nearby comment to match the code.
Marco Elver [Thu, 16 Apr 2026 13:25:07 +0000 (15:25 +0200)]
slub: fix data loss and overflow in krealloc()
Commit 2cd8231796b5 ("mm/slub: allow to set node and align in
k[v]realloc") introduced the ability to force a reallocation if the
original object does not satisfy new alignment or NUMA node, even when
the object is being shrunk.
This introduced two bugs in the reallocation fallback path:
1. Data loss during NUMA migration: The jump to 'alloc_new' happens
before 'ks' and 'orig_size' are initialized. As a result, the
memcpy() in the 'alloc_new' block would copy 0 bytes into the new
allocation.
2. Buffer overflow during shrinking: When shrinking an object while
forcing a new alignment, 'new_size' is smaller than the old size.
However, the memcpy() used the old size ('orig_size ?: ks'), leading
to an out-of-bounds write.
The same overflow bug exists in the kvrealloc() fallback path, where the
old bucket size ksize(p) is copied into the new buffer without being
bounded by the new size.
A simple reproducer:
// e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW
while (1) {
void *p = kmalloc(128, GFP_KERNEL);
p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE);
kfree(p);
}
demonstrates the issue:
==================================================================
BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130
Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47):
memcpy_orig+0x68/0x130
krealloc_node_align_noprof+0x1c8/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago):
krealloc_node_align_noprof+0x19c/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
==================================================================
Fix it by moving the old size calculation to the top of __do_krealloc()
and bounding all copy lengths by the new allocation size.
Fixes: 2cd8231796b5 ("mm/slub: allow to set node and align in k[v]realloc") Cc: stable@vger.kernel.org Reported-by: https://sashiko.dev/#/patchset/20260415143735.2974230-1-elver%40google.com Signed-off-by: Marco Elver <elver@google.com> Link: https://patch.msgid.link/20260416132837.3787694-1-elver@google.com Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org> Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Starting one background YNL notification listener per peer back-to-back
can intermittently stall the test setup before the listeners even reach
the Python main function.
This was reproducible in a reduced test.sh setup-only loop: a single
listener stayed stable across repeated runs, while starting listeners
for all peers could hang early in the listener launch phase. Adding a
short delay between listener launches makes the listeners start cleanly
and eliminates the reproduced hangs in repeated normal and slow-runner
tests.
Serialize listener startup with a small sleep between setup_listener
calls.
Fixes: 77de28cd7cf1 ("selftests: ovpn: add notification parsing and matching") Signed-off-by: Ralf Lici <ralf@mandelbit.com> Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Ralf Lici [Mon, 23 Mar 2026 14:12:32 +0000 (15:12 +0100)]
selftests: ovpn: align command flow with TAP
Current tests do not properly adhere to the TAP infrastructure
therefore they do not properly report failures leading to hangs of
the CI machinery.
Restructure ovpn selftests into using the TAP infrastructure: split each
test in stages, execute stage bodies with fail-fast semantics, and emit
KTAP pass/fail for each stage.
Centralize behavior control in common.sh and makes the scripts use
dedicated wrappers for required-success, expected-failure, and non-fatal
commands. Also add the OVPN_VERBOSE mode that exposes captured command
output for debugging.
This way tests won't hang anymore in case of failure when executed
within the CI machinery.
This change also makes default OVPN_CLI and YNL resolution
independent from the caller CWD by anchoring both to COMMON_DIR, so
behavior is stable across direct execution and run_tests-style
execution.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module") Signed-off-by: Ralf Lici <ralf@mandelbit.com> Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Ralf Lici [Fri, 20 Mar 2026 16:29:38 +0000 (17:29 +0100)]
selftests: ovpn: add prefix to helpers and shared variables
Current naming for shared variables, helpers and netnamespaces is
a bit unfortunate as it doesn't come with a clean prefix.
This showed to be problematic in case of name clashes with external
scripts or in case of abrupt test termination (hanging netns' weren't
easily reconducible to ovpn).
Rename common helper entry points and all shared globals in the ovpn
selftests to ovpn_ or OVPN_ names so test scripts and wrappers use a
single explicit prefix. Also rename the temporary network namespaces
created by the tests from peerN to ovpn_peerN. This makes leaked
namespaces easier to identify.
This is a mechanical refactor only, behavior is unchanged.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module") Signed-off-by: Ralf Lici <ralf@mandelbit.com> Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Ralf Lici [Tue, 24 Mar 2026 14:54:18 +0000 (15:54 +0100)]
selftests: ovpn: flatten slurped notification JSON before filtering
Notification comparison uses jq -s, which slurps all inputs into an
array. Some inputs can be arrays themselves, and applying the .msg.peer
filter directly on those entries triggers jq type errors.
Expand any array-valued JSON items returned by jq -s before selecting
.msg.peer, so the filter handles both normal notification objects and []
entries without type errors.
Fixes: 77de28cd7cf1 ("selftests: ovpn: add notification parsing and matching") Signed-off-by: Ralf Lici <ralf@mandelbit.com> Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Ralf Lici [Tue, 24 Mar 2026 07:48:57 +0000 (08:48 +0100)]
selftests: ovpn: add nftables config dependencies for test-mark
test-mark.sh installs nftables rules in an inet/filter output chain and
verifies packet drops via nft counters. In vmksft this can fail when the
nftables core is not enabled by the ovpn selftest config.
Add the missing kernel options required by this test:
- CONFIG_NETFILTER
- CONFIG_NF_TABLES
- CONFIG_NF_TABLES_INET
Fixes: 7b80d8a33500 ("selftests: ovpn: add test for the FW mark feature") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/all/20260319124114.42f91f72@kernel.org/ Signed-off-by: Ralf Lici <ralf@mandelbit.com> Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Giovanni Cabiddu [Thu, 16 Apr 2026 17:07:00 +0000 (18:07 +0100)]
crypto: acomp - fix wrong pointer stored by acomp_save_req()
acomp_save_req() stores &req->chain in req->base.data. When
acomp_reqchain_done() is invoked on asynchronous completion, it receives
&req->chain as the data argument but casts it directly to struct
acomp_req. Since data points to the chain member, all subsequent field
accesses are at a wrong offset, resulting in memory corruption.
The issue occurs when an asynchronous hardware implementation, such as
the QAT driver, completes a request that uses the DMA virtual address
interface (e.g. acomp_request_set_src_dma()). This combination causes
crypto_acomp_compress() to enter the acomp_do_req_chain() path, which
sets acomp_reqchain_done() as the completion callback via
acomp_save_req().
With KASAN enabled, this manifests as a general protection fault in
acomp_reqchain_done():
general protection fault, probably for non-canonical address 0xe000040000000000
KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007]
RIP: 0010:acomp_reqchain_done+0x15b/0x4e0
Call Trace:
<IRQ>
qat_comp_alg_callback+0x5d/0xa0 [intel_qat]
adf_ring_response_handler+0x376/0x8b0 [intel_qat]
adf_response_handler+0x60/0x170 [intel_qat]
tasklet_action_common+0x223/0x820
handle_softirqs+0x1ab/0x640
</IRQ>
Fix this by storing the request itself in req->base.data instead of
&req->chain, so that acomp_reqchain_done() receives the correct pointer.
Simplify acomp_restore_req() accordingly to access req->chain directly.
Fixes: 64929fe8c0a4 ("crypto: acomp - Remove request chaining") Cc: stable@vger.kernel.org Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path.
Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ruide Cao <caoruide123@gmail.com> Signed-off-by: Yilin Zhu <zylzyl2333@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Guangshuo Li [Wed, 15 Apr 2026 19:31:38 +0000 (03:31 +0800)]
ALSA: pcmtest: fix reference leak on failed device registration
When platform_device_register() fails in mod_init(), the embedded struct
device in pcmtst_pdev has already been initialized by
device_initialize(), but the failure path returns the error without
dropping the device reference for the current platform device:
Cássio Gabriel [Thu, 16 Apr 2026 13:24:40 +0000 (10:24 -0300)]
ALSA: 6fire: Fix input volume change detection
usb6fire_control_input_vol_put() stores the analog capture volume
as a signed offset in rt->input_vol[] (-15..+15), but it compares
the cached value against the user-visible mixer value (0..30)
before subtracting 15.
This mixes two domains in the change detection path. Since the
runtime is zero-initialized, the visible default is 15; writing 0
right after probe is ignored, while writing 15 is reported as a
change even though the cached value remains 0.
Normalize the user value before comparing it with the cached offset.
ALSA: usb-audio: Add quirk entries for NexiGo N930W webcam
The NexiGo N930W 60fps webcam (USB ID 3443:930d) hits the same
'cannot get freq at ep 0x84' error in snd-usb-audio as its sibling
N930AF (1bcf:2283). Without QUIRK_FLAG_GET_SAMPLE_RATE the ADC clock
is never configured and the microphone streams only zero samples.
Testing on Linux 6.17 with QUIRK_FLAG_GET_SAMPLE_RATE |
QUIRK_FLAG_MIC_RES_16 (via quirk_alias=3443930d:1bcf2283) confirmed
the microphone captures real audio after a cold USB re-enumeration.
Adding a native quirk_flags_table entry avoids the alias workaround.
Michal Wajdeczko [Thu, 16 Apr 2026 13:18:31 +0000 (15:18 +0200)]
drm/xe/pf: Fix VF's scheduling priority reporting
When preparing number of impacted VFs parameter for the reporting
helper function, we wrongly ended with adding +1 (representing PF)
twice, since local variable total_vfs was already adjusted. This
resulted in printing a message that was referring to an invalid VF:
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several fixes:
- Add missing static const
- Correct type 1 emulation for VFIO_CHECK_EXTENSION when no-iommu is
turned on
- Fix selftest memory leak and syzkaller splat
- Fix missed -EFAULT in fault reporting write() fops
- Fix a race where map/unmap with the internal IOVA allocator can
unmap things it should not"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix a race with concurrent allocation and unmap
iommufd/selftest: Remove MOCK_IOMMUPT_AMDV1 format
iommufd: Fix return value of iommufd_fault_fops_write()
iommufd: update outdated comment for renamed iommufd_hw_pagetable_alloc()
iommufd/selftest: Fix page leaks in mock_viommu_{init,destroy}
iommufd: vfio compatibility extension check for noiommu mode
iommufd: Constify struct dma_buf_attach_ops
projects / thirdparty / linux.git / log
