Merge tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- KLP support updates and fixes (Song Liu)
- KLP-build script updates and fixes (Joe Lawrence)
- Support Clang RAX DRAP sequence, to address clang false positive
(Josh Poimboeuf)
- Reorder ORC register numbering to match regular x86 register
numbering (Josh Poimboeuf)
- Misc cleanups (Wentong Tian, Song Liu)
* tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: Reorder ORC register numbering
objtool: Support Clang RAX DRAP sequence
livepatch/klp-build: report patch validation fuzz
livepatch/klp-build: add terminal color output
livepatch/klp-build: provide friendlier error messages
livepatch/klp-build: improve short-circuit validation
livepatch/klp-build: fix shellcheck complaints
livepatch/klp-build: add Makefile with check target
livepatch/klp-build: add grep-override function
livepatch/klp-build: switch to GNU patch and recountdiff
livepatch/klp-build: support patches that add/remove files
objtool/klp: Correlate locals to globals
objtool/klp: Match symbols based on demangled_name for global variables
objtool/klp: Remove .llvm suffix in demangle_name()
objtool/klp: Also demangle global objects
objtool/klp: Use sym->demangled_name for symbol_name hash
objtool/klp: Remove trailing '_' in demangle_name()
objtool/klp: Remove redundant strcmp() in correlate_symbols()
objtool: Use section/symbol type helpers
Wolfram Sang [Tue, 14 Apr 2026 19:48:38 +0000 (21:48 +0200)]
Merge tag 'i2c-host-7.1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v7.1, part 1
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
Miscellaneous fixes and cleanups by Peter Zijlstra, Randy Dunlap,
Thomas Weißschuh, Davidlohr Bueso and Mikhail Gavrilov"
* tag 'locking-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
compiler: Simplify generic RELOC_HIDE()
locking: Add lock context annotations in the spinlock implementation
locking: Add lock context support in do_raw_{read,write}_trylock()
locking: Fix rwlock support in <linux/spinlock_up.h>
lockdep: Raise default stack trace limits when KASAN is enabled
cleanup: Optimize guards
jump_label: remove workaround for old compilers in initializations
jump_label: use ATOMIC_INIT() for initialization of .enabled
futex: Convert to compiler context analysis
locking/rwsem: Fix logic error in rwsem_del_waiter()
locking/rwsem: Add context analysis
locking/rtmutex: Add context analysis
locking/mutex: Add context analysis
compiler-context-analysys: Add __cond_releases()
locking/mutex: Remove the list_head from struct mutex
locking/semaphore: Remove the list_head from struct semaphore
locking/rwsem: Remove the list_head from struct rw_semaphore
rust: atomic: Update a safety comment in impl of `fetch_add()`
rust: sync: atomic: Update documentation for `fetch_add()`
rust: sync: atomic: Add fetch_sub()
...
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h a6bd339dbb351 ("net_sched: fix skb memory leak in deferred qdisc drops") ff2998f29f390 ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c 1acdfbdb516b ("net: airoha: Fix VIP configuration for AN7583 SoC") bf3471e6e6c0 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c f44218cd5e6a ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()") 7da62262ec96 ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
The kernel-doc comment header incorrectly referenced the function
name pse_control_find_net_by_id() instead of the actual function name
pse_control_find_by_id(). Correct the function name in the documentation
to match the implementation.
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the
pernet .pre_exit callback. This causes a hung task when another
thread holds rtnl_mutex - the cleanup_net workqueue (or the
setup_net failure rollback path) blocks indefinitely in
wg_netns_pre_exit() waiting to acquire the lock.
Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:
Add ->exit_rtnl() hook to struct pernet_operations."), where the
framework already holds RTNL and batches all callbacks under a
single rtnl_lock()/rtnl_unlock() pair, eliminating the contention
window.
The rcu_assign_pointer(wg->creating_net, NULL) is safe to move
from .pre_exit to .exit_rtnl (which runs after synchronize_rcu())
because all RCU readers of creating_net either use maybe_get_net()
- which returns NULL for a dying namespace with zero refcount - or
access net->user_ns which remains valid throughout the entire
ops_undo_list sequence.
Reported-by: syzbot+f2fbf7478a35a94c8b7c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?id=cb64c22a492202ca929e18262fdb8cb89e635c70 Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
[ Jason: added __net_exit and __read_mostly annotations that were missing. ] Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20260414153944.2742252-5-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fushuai Wang [Tue, 14 Apr 2026 15:39:41 +0000 (17:39 +0200)]
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
Replace call_rcu() + kmem_cache_free() with kfree_rcu() to simplify
the code and reduce function size.
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20260414153944.2742252-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'smp-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP core updates from Thomas Gleixner:
- Switch smp_call_on_cpu() to user system_percpu_wq instead of
system_wq a part of the ongoing workqueue restructuring
- Improve the CSD-lock diagnostics for smp_call_function_single() to
provide better debug mechanisms on weakly ordered systems.
- Cache the current CPU number once in smp_call_function*() instead of
retrieving it over and over.
- Add missing kernel-doc comments all over the place
* tag 'smp-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Use system_percpu_wq instead of system_wq
smp: Improve smp_call_function_single() CSD-lock diagnostics
smp: Get this_cpu once in smp_call_function
smp: Add missing kernel-doc comments
Bharath SM [Tue, 14 Apr 2026 16:18:04 +0000 (21:48 +0530)]
smb: client: add oplock level to smb3_open_done tracepoint
Add an oplock field to the smb3_open_done_class trace event to
show the granted oplock/lease level. Move the trace_smb3_open_done
call after smb2_parse_contexts() so the oplock value reflects
the parsed lease state (R/W/H flags).
Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Bharath SM [Tue, 14 Apr 2026 16:18:03 +0000 (21:48 +0530)]
smb: client: add tracepoint for local lock conflicts
Add smb3_lock_conflict tracepoint that fires when a byte-range
lock request conflicts with an existing cached lock. This helps
debug lock contention issues when locks are cached locally due
to oplocks/leases.
The trace includes both the requested and conflicting lock details:
- Requested: offset, length, type
- Conflicting: offset, length, type, pid (lock holder)
Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Bharath SM [Tue, 14 Apr 2026 16:18:02 +0000 (21:48 +0530)]
smb: client: add tracepoints for lock operations
Add tracepoints when lock operations are sent to the
server with details including lock offset, length, and flags.
smb3_lock_enter: before sending lock request
smb3_lock_done: lock acquired successfully
smb3_lock_err: lock request failed
smb3_lock_cached: lock granted from local cache (no server roundtrip)
Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Merge tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Make the handling of compat functions consistent and more robust
- Rework the underlying data store so that it is dynamically allocated,
which allows the conversion of the last holdout SPARC64 to the
generic VDSO implementation
- Rework the SPARC64 VDSO to utilize the generic implementation
- Mop up the left overs of the non-generic VDSO support in the core
code
- Expand the VDSO selftest and make them more robust
- Allow time namespaces to be enabled independently of the generic VDSO
support, which was not possible before due to SPARC64 not using it
- Various cleanups and improvements in the related code
* tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
timens: Use task_lock guard in timens_get*()
timens: Use mutex guard in proc_timens_set_offset()
timens: Simplify some calls to put_time_ns()
timens: Add a __free() wrapper for put_time_ns()
timens: Remove dependency on the vDSO
vdso/timens: Move functions to new file
selftests: vDSO: vdso_test_correctness: Add a test for time()
selftests: vDSO: vdso_test_correctness: Use facilities from parse_vdso.c
selftests: vDSO: vdso_test_correctness: Handle different tv_usec types
selftests: vDSO: vdso_test_correctness: Drop SYS_getcpu fallbacks
selftests: vDSO: vdso_test_gettimeofday: Remove nolibc checks
Revert "selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers"
random: vDSO: Remove ifdeffery
random: vDSO: Trim vDSO includes
vdso/datapage: Trim down unnecessary includes
vdso/datapage: Remove inclusion of gettimeofday.h
vdso/helpers: Explicitly include vdso/processor.h
vdso/gettimeofday: Add explicit includes
random: vDSO: Add explicit includes
MIPS: vdso: Explicitly include asm/vdso/vdso.h
...
Merge tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- A rework of the hrtimer subsystem to reduce the overhead for
frequently armed timers, especially the hrtick scheduler timer:
- Better timer locality decision
- Simplification of the evaluation of the first expiry time by
keeping track of the neighbor timers in the RB-tree by providing
a RB-tree variant with neighbor links. That avoids walking the
RB-tree on removal to find the next expiry time, but even more
important allows to quickly evaluate whether a timer which is
rearmed changes the position in the RB-tree with the modified
expiry time or not. If not, the dequeue/enqueue sequence which
both can end up in rebalancing can be completely avoided.
- Deferred reprogramming of the underlying clock event device. This
optimizes for the situation where a hrtimer callback sets the
need resched bit. In that case the code attempts to defer the
re-programming of the clock event device up to the point where
the scheduler has picked the next task and has the next hrtick
timer armed. In case that there is no immediate reschedule or
soft interrupts have to be handled before reaching the reschedule
point in the interrupt entry code the clock event is reprogrammed
in one of those code paths to prevent that the timer becomes
stale.
- Support for clocksource coupled clockevents
The TSC deadline timer is coupled to the TSC. The next event is
programmed in TSC time. Currently this is done by converting the
CLOCK_MONOTONIC based expiry value into a relative timeout,
converting it into TSC ticks, reading the TSC adding the delta
ticks and writing the deadline MSR.
As the timekeeping core has the conversion factors for the TSC
already, the whole back and forth conversion can be completely
avoided. The timekeeping core calculates the reverse conversion
factors from nanoseconds to TSC ticks and utilizes the base
timestamps of TSC and CLOCK_MONOTONIC which are updated once per
tick. This allows a direct conversion into the TSC deadline value
without reading the time and as a bonus keeps the deadline
conversion in sync with the TSC conversion factors, which are
updated by adjtimex() on systems with NTP/PTP enabled.
- Allow inlining of the clocksource read and clockevent write
functions when they are tiny enough, e.g. on x86 RDTSC and WRMSR.
With all those enhancements in place a hrtick enabled scheduler
provides the same performance as without hrtick. But also other
hrtimer users obviously benefit from these optimizations.
- Robustness improvements and cleanups of historical sins in the
hrtimer and timekeeping code.
- Rewrite of the clocksource watchdog.
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design,
which was made in the context of systems far smaller than today, is
based on the assumption that the to be monitored clocksource (TSC)
can be trivially compared against a known to be stable clocksource
(HPET/ACPI-PM timer).
Over the years this rather naive approach turned out to have major
flaws. Long delays between the watchdog invocations can cause wrap
arounds of the reference clocksource. The access to the reference
clocksource degrades on large multi-sockets systems dure to
interconnect congestion. This has been addressed with various
heuristics which degraded the accuracy of the watchdog to the point
that it fails to detect actual TSC problems on older hardware which
exposes slow inter CPU drifts due to firmware manipulating the TSC to
hide SMI time.
The rewrite addresses this by:
- Restricting the validation against the reference clocksource to
the boot CPU which is usually closest to the legacy block which
contains the reference clocksource (HPET/ACPI-PM).
- Do a round robin validation betwen the boot CPU and the other
CPUs based only on the TSC with an algorithm similar to the TSC
synchronization code during CPU hotplug.
- Being more leniant versus remote timeouts
- The usual tiny fixes, cleanups and enhancements all over the place
* tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
alarmtimer: Access timerqueue node under lock in suspend
hrtimer: Fix incorrect #endif comment for BITS_PER_LONG check
posix-timers: Fix stale function name in comment
timers: Get this_cpu once while clearing the idle state
clocksource: Rewrite watchdog code completely
clocksource: Don't use non-continuous clocksources as watchdog
x86/tsc: Handle CLOCK_SOURCE_VALID_FOR_HRES correctly
MIPS: Don't select CLOCKSOURCE_WATCHDOG
parisc: Remove unused clocksource flags
hrtimer: Add a helper to retrieve a hrtimer from its timerqueue node
hrtimer: Remove trailing comma after HRTIMER_MAX_CLOCK_BASES
hrtimer: Mark index and clockid of clock base as const
hrtimer: Drop unnecessary pointer indirection in hrtimer_expire_entry event
hrtimer: Drop spurious space in 'enum hrtimer_base_type'
hrtimer: Don't zero-initialize ret in hrtimer_nanosleep()
hrtimer: Remove hrtimer_get_expires_ns()
timekeeping: Mark offsets array as const
timekeeping/auxclock: Consistently use raw timekeeper for tk_setup_internals()
timer_list: Print offset as signed integer
tracing: Use explicit array size instead of sentinel elements in symbol printing
...
Merge tag 'irq-msi-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt update from Thomas Gleixner:
"A small update for the MSI interrupt library to check for callers
which fail to provide the mandatory irq_write_msi_msg() callback,
which prevents a NULL pointer dereference later"
* tag 'irq-msi-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/msi-lib: Refuse initialization when irq_write_msi_msg() is missing
Merge tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- A large refactoring for the Renesas RZV2H driver to add new interrupt
types cleanly
- A large refactoring for the Renesas RZG2L driver to add support the
new RZ/G3L variant
- Add support for the new NXP S32N79 chip in the IMX irq-steer driver
- Add support for the Apple AICv3 variant
- Enhance the Loongson PCH LPC driver so it can be used on MIPS with
device tree firmware
- Allow the PIC32 EVIC driver to be built independent of MIPS in
compile tests
- The usual small fixes and enhancements all over the place
* tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqchip/irq-pic32-evic: Add __maybe_unused for board_bind_eic_interrupt in COMPILE_TEST
irqchip/renesas-rzv2h: Kill icu_err string
irqchip/renesas-rzv2h: Kill swint_names[]
irqchip/renesas-rzv2h: Kill swint_idx[]
irqchip/renesas-rzg2l: Add NMI support
irqchip/renesas-rzg2l: Clear the shared interrupt bit in rzg2l_irqc_free()
irqchip/renesas-rzg2l: Replace raw_spin_{lock,unlock} with guard() in rzg2l_irq_set_type()
irqchip/gic-v3: Print a warning for out-of-range interrupt numbers
irqchip/renesas-rzg2l: Add shared interrupt support
irqchip/renesas-rzg2l: Add RZ/G3L support
irqchip/renesas-rzg2l: Drop IRQC_IRQ_COUNT macro
irqchip/renesas-rzg2l: Drop IRQC_TINT_START macro
irqchip/renesas-rzg2l: Drop IRQC_NUM_IRQ macro
irqchip/renesas-rzg2l: Dynamically allocate fwspec array
irqchip/renesas-rzg2l: Split rzfive_irqc_{mask,unmask} into separate IRQ and TINT handlers
irqchip/renesas-rzg2l: Split rzfive_tint_irq_endisable() into separate IRQ and TINT helpers
irqchip/renesas-rzg2l: Replace rzg2l_irqc_irq_{enable,disable} with TINT-specific handlers
irqchip/renesas-rzg2l: Split set_type handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Split EOI handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Replace single irq_chip with per-region irq_chip instances
...
Merge tag 'irq-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq updates from Thomas Gleixner:
- Invoke add_interrupt_randomness() in handle_percpu_devid_irq() and
cleanup the workaround in the Hyper-V driver, which would now invoke
it twice on ARM64. Removing it from the driver requires to add it to
the x86 system vector entry point
- Remove the pointles cpu_read_lock() around reading CPU possible mask,
which is read only after init
- Add documentation for the interaction between device tree bindings
and the interrupt type defines in irq.h
- Delete stale defines in the matrix allocator and the equivalent in
loongarch
* tag 'irq-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Drivers: hv: Move add_interrupt_randomness() to hypervisor callback sysvec
genirq/chip: Invoke add_interrupt_randomness() in handle_percpu_devid_irq()
genirq/affinity: Remove cpus_read_lock() while reading cpu_possible_mask
genirq/matrix, LoongArch: Delete IRQ_MATRIX_BITS leftovers
genirq: Document interaction between <linux/irq.h> and DT binding defines
Paulo Alcantara [Tue, 14 Apr 2026 14:37:21 +0000 (11:37 -0300)]
vfs: get rid of BUG_ON() in d_mark_tmpfile_name()
Do proper error handling in d_mark_tmpfile_name() by returning errors
rather than using BUG_ON()'s.
Adjust caller to check for errors from d_mark_tmpfile_name() as well
as clean it up for using return value from scnprintf() in QSTR_LEN()
to make it more obvious where the tmpfile name's length is coming
from.
Link: https://lore.kernel.org/r/CAHk-=wgerpUKCDhdzKH0FEdLyfhj3doc9t+kO9Yb6rSsTp7hdQ@mail.gmail.com Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> CC: linux-fsdevel@vger.kernel.org Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Merge tag 'core-entry-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry code update from Thomas Gleixner:
"A trivial update for the entry code adding missing kernel
documentation for function arguments"
* tag 'core-entry-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Add missing kernel-doc for arch_ptrace_report_syscall functions
Merge tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nicolas Schier:
"Kbuild:
- reject unexpected values for LLVM=
- uapi: remove usage of toolchain headers
- switch from '-fms-extensions' to '-fms-anonymous-structs' when
available (currently: clang >= 23.0.0)
- reduce the number of compiler-generated suffixes for clang thin-lto
build
- reduce output spam ("GEN Makefile") when building out of tree
- improve portability for testing headers
- also test UAPI headers against C++ compilers
- drop build ID architecture allow-list in vdso_install
- only run checksyscalls when necessary
- update the debug information notes in reproducible-builds.rst
- expand inlining hints with -fdiagnostics-show-inlining-chain
Kconfig:
- forbid multiple entries with the same symbol in a choice
- error out on duplicated kconfig inclusion"
* tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (35 commits)
kbuild: expand inlining hints with -fdiagnostics-show-inlining-chain
kconfig: forbid multiple entries with the same symbol in a choice
Documentation: kbuild: Update the debug information notes in reproducible-builds.rst
checksyscalls: move instance functionality into generic code
checksyscalls: only run when necessary
checksyscalls: fail on all intermediate errors
checksyscalls: move path to reference table to a variable
kbuild: vdso_install: drop build ID architecture allow-list
kbuild: vdso_install: gracefully handle images without build ID
kbuild: vdso_install: hide readelf warnings
kbuild: vdso_install: split out the readelf invocation
kbuild: uapi: also test UAPI headers against C++ compilers
kbuild: uapi: provide a C++ compatible dummy definition of NULL
kbuild: uapi: handle UML in architecture-specific exclusion lists
kbuild: uapi: move all include path flags together
kbuild: uapi: move some compiler arguments out of the command definition
check-uapi: use dummy libc includes
check-uapi: honor ${CROSS_COMPILE} setting
check-uapi: link into shared objects
kbuild: reduce output spam when building out of tree
...
accel/amdxdna: Fix order of canceled mailbox messages
Mailbox message IDs are allocated cyclically. When destroying a mailbox
channel, pending messages are canceled starting from message ID 0. This
results in an incorrect cancellation order when the ID of the last posted
message wraps around and is smaller than the ID of the first posted
message.
Fix this by canceling pending messages starting from the next available
message ID, ensuring the correct ordering across wraparound.
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
The HP Omen 16-wf1xxx (board ID: 8C77) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C77 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Thomas Arici <absolute3d86@gmail.com> Reported-by: Thomas Arici <absolute3d86@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221300 Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com> Link: https://patch.msgid.link/20260410191039.125659-5-krishna.chomal108@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
The HP Omen 16-n0xxx (board ID: 8A44) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.
Testing on board 8A44 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Prasoon Dev <prasoon5050@outlook.com> Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com> Link: https://patch.msgid.link/20260410191039.125659-4-krishna.chomal108@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
The HP OMEN MAX 16-ak0xxx (8D87) requires the same WMI queries as other
Victus S devices, hence it has been added to the corresponding list.
For this reason, platform_profile_victus_s_get_ec() will be called
during thermal_profile_setup() and victus_s_powersource_event() to
obtain hardware state (platform profile) by reading from the Embedded
Controller, however, this particular board's EC does not seem to expose
the platform profile value, unlike other boards. Hence EC readback is
disabled.
Testing on board 8D87 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Jinyang Zhu <Jakie101@proton.me> Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com> Link: https://patch.msgid.link/20260410191039.125659-3-krishna.chomal108@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For Victus S devices, the BIOS fan table header was being incorrectly
parsed as:
struct {
u8 unknown;
u8 num_entries;
}
The first field should be num_fans and the second should be unknown. It
is pure coincidence that interpreting an "unknown" field as "num_entries"
worked on multiple device, however for board 8D87 (in an upcoming patch),
this assumption fails, and the hp-wmi driver fails to load.
We fix this by correcting the header definition and compensating for
num_entries by parsing each entry of the fan table until an all-NULL row
is obtained, mirroring the behavior of OMEN Gaming Hub on Windows.
Fixes: 46be1453e6e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models") Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com> Link: https://patch.msgid.link/20260410191039.125659-2-krishna.chomal108@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge tag 'bitmap-for-v7.1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- new API: bitmap_weight_from() and bitmap_weighted_xor() (Yury)
- drop unused __find_nth_andnot_bit() (Yury)
- new tests and test improvements (Andy, Akinobu, Yury)
- fixes for count_zeroes API (Yury)
- cleanup bitmap_print_to_pagebuf() mess (Yury)
- documentation updates (Andy, Kai, Kit).
* tag 'bitmap-for-v7.1' of https://github.com/norov/linux: (24 commits)
bitops: Update kernel-doc for sign_extendXX()
powerpc/xive: simplify xive_spapr_debug_show()
thermal: intel: switch cpumask_get() to using cpumask_print_to_pagebuf()
coresight: don't use bitmap_print_to_pagebuf()
lib/prime_numbers: drop temporary buffer in dump_primes()
drm/xe: switch xe_pagefault_queue_init() to using bitmap_weighted_or()
ice: use bitmap_empty() in ice_vf_has_no_qs_ena
ice: use bitmap_weighted_xor() in ice_find_free_recp_res_idx()
bitmap: introduce bitmap_weighted_xor()
bitmap: add test_zero_nbits()
bitmap: exclude nbits == 0 cases from bitmap test
bitmap: test bitmap_weight() for more
asm-generic/bitops: Fix a comment typo in instrumented-atomic.h
bitops: fix kernel-doc parameter name for parity8()
lib: count_zeros: unify count_{leading,trailing}_zeros()
lib: count_zeros: fix 32/64-bit inconsistency in count_trailing_zeros()
lib: crypto: fix comments for count_leading_zeros()
x86/topology: use bitmap_weight_from()
bitmap: add bitmap_weight_from()
lib/find_bit_benchmark: avoid clearing randomly filled bitmap in test_find_first_bit()
...
Merge tag 'docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A busier cycle than I had expected for docs, including:
- Translations: some overdue updates to the Japanese translations,
Chinese translations for some of the Rust documentation, and the
beginnings of a Portuguese translation.
- New documents covering CPU isolation, managed interrupts, debugging
Python gbb scripts, and more.
- More tooling work from Mauro, reducing docs-build warnings, adding
self tests, improving man-page output, bringing in a proper C
tokenizer to replace (some of) the mess of kernel-doc regexes, and
more.
- Update and synchronize changes.rst and scripts/ver_linux, and put
both into alphabetical order.
... and a long list of documentation updates, typo fixes, and general
improvements"
* tag 'docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (162 commits)
Documentation: core-api: real-time: correct spelling
doc: Add CPU Isolation documentation
Documentation: Add managed interrupts
Documentation: seq_file: drop 2.6 reference
docs/zh_CN: update rust/index.rst translation
docs/zh_CN: update rust/quick-start.rst translation
docs/zh_CN: update rust/coding-guidelines.rst translation
docs/zh_CN: update rust/arch-support.rst translation
docs/zh_CN: sync process/2.Process.rst with English version
docs/zh_CN: fix an inconsistent statement in dev-tools/testing-overview
tracing: Documentation: Update histogram-design.rst for fn() handling
docs: sysctl: Add documentation for /proc/sys/xen/
Docs: hid: intel-ish-hid: make long URL usable
Documentation/kernel-parameters: fix architecture alignment for pt, nopt, and nobypass
sched/doc: Update yield_task description in sched-design-CFS
Documentation/rtla: Convert links to RST format
docs: fix typos and duplicated words across documentation
docs: fix typo in zoran driver documentation
docs: add an Assisted-by mention to submitting-patches.rst
Revert "scripts/checkpatch: add Assisted-by: tag validation"
...
Shuicheng Lin [Wed, 8 Apr 2026 02:06:47 +0000 (02:06 +0000)]
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
Two error handling issues exist in xe_exec_queue_create_ioctl():
1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps
to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in
preempt fence mode, xe_vm_add_compute_exec_queue() has already added
the queue to the VM's compute exec queue list. Skipping the kill
leaves the queue on that list, leading to a dangling pointer after
the queue is freed.
2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has
succeeded, the error path does not call
xe_hw_engine_group_del_exec_queue() to remove the queue from the hw
engine group list. The queue is then freed while still linked into
the hw engine group, causing a use-after-free.
Fix both by:
- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump
to kill_exec_queue so that xe_exec_queue_kill() properly removes the
queue from the VM's compute list.
- Adding a del_hw_engine_group label before kill_exec_queue for the
xa_alloc() failure path, which removes the queue from the hw engine
group before proceeding with the rest of the cleanup.
Shuicheng Lin [Wed, 8 Apr 2026 17:52:55 +0000 (17:52 +0000)]
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.6 Reviewed-by: Mattheq Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260408175255.3402838-5-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Shuicheng Lin [Wed, 8 Apr 2026 17:52:54 +0000 (17:52 +0000)]
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.
Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.
v2: Add comments to explain the free logic.
Fixes: eb289a5f6cc6 ("drm/xe: Convert xe_dma_buf.c for exhaustive eviction") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.6 Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260408175255.3402838-4-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Shuicheng Lin [Wed, 8 Apr 2026 17:52:53 +0000 (17:52 +0000)]
drm/xe/bo: Fix bo leak on GGTT flag validation in xe_bo_init_locked()
When XE_BO_FLAG_GGTT_ALL is set without XE_BO_FLAG_GGTT, the function
returns an error without freeing a caller-provided bo, violating the
documented contract that bo is freed on failure.
Add xe_bo_free(bo) before returning the error.
Fixes: 5a3b0df25d6a ("drm/xe: Allow bo mapping on multiple ggtts") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.6 Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260408175255.3402838-3-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Shuicheng Lin [Wed, 8 Apr 2026 17:52:52 +0000 (17:52 +0000)]
drm/xe/bo: Fix bo leak on unaligned size validation in xe_bo_init_locked()
When type is ttm_bo_type_device and aligned_size != size, the function
returns an error without freeing a caller-provided bo, violating the
documented contract that bo is freed on failure.
Add xe_bo_free(bo) before returning the error.
Fixes: 4e03b584143e ("drm/xe/uapi: Reject bo creation of unaligned size") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4.6 Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260408175255.3402838-2-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Shuicheng Lin [Thu, 9 Apr 2026 00:34:49 +0000 (00:34 +0000)]
drm/xe: Fix potential NULL deref in xe_exec_queue_tlb_inval_last_fence_put_unlocked
xe_exec_queue_tlb_inval_last_fence_put_unlocked() uses q->vm->xe as the
first argument to xe_assert(). This function is called unconditionally
from xe_exec_queue_destroy() for all queues, including kernel queues
that have q->vm == NULL (e.g., queues created during GT init in
xe_gt_record_default_lrcs() with vm=NULL).
While current compilers optimize away the q->vm->xe dereference (even
in CONFIG_DRM_XE_DEBUG=y builds, the compiler pushes the dereference
into the WARN branch that is only taken when the assert condition is
false), the code is semantically incorrect and constitutes undefined
behavior in the C abstract machine for the NULL pointer case.
Use gt_to_xe(q->gt) instead, which is always valid for any exec queue.
This is consistent with how xe_exec_queue_destroy() itself obtains the
xe_device pointer in its own xe_assert at the top of the function.
Fixes: b2d7ec41f2a3 ("drm/xe: Attach last fence to TLB invalidation job queues") Assisted-by: Claude:claude-opus-4.6 Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260409003449.3405767-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Sami Mujawar [Fri, 10 Apr 2026 16:36:36 +0000 (17:36 +0100)]
virt: arm-cca-guest: fix error check for RSI_INCOMPLETE
The RSI interface can return RSI_INCOMPLETE when a report spans
multiple granules. This is an expected condition and should not be
treated as a fatal error.
Currently, arm_cca_report_new() checks for `info.result != RSI_SUCCESS`
and bails out, which incorrectly flags RSI_INCOMPLETE as a failure.
Fix the check to only break out on results other than RSI_SUCCESS or
RSI_INCOMPLETE.
This ensures partial reports are handled correctly and avoids spurious
-ENXIO errors when generating attestation reports.
Fixes: 7999edc484ca ("virt: arm-cca-guest: TSM_REPORT support for realms") Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reported-by: Jagdish Gediya <Jagdish.Gediya@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Brown [Mon, 13 Apr 2026 15:44:11 +0000 (16:44 +0100)]
arm64/hwcap: Include kernel-hwcap.h in list of generated files
When adding generation for the kernel internal constants for hwcaps the
generated file was not explicitly flagged as such in the build system,
causing it to be regenerated on each build. This wasn't obvious when the
series the change was included in was developed since it was all about
changes that trigger rebuilds anyway.
Fixes: abed23c3c44f ("arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps") Reported-by: Marek Vasut <marex@nabladev.com> Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
====================
Follow-ups to nk_qlease net selftests
This is a set of follow-ups addressing [0]:
- Split netdevsim tests from HW tests in nk_qlease and move the SW
tests under selftests/net/
- Remove multiple ksft_run()s to fix the recently enforced hard-fail
- Move all the setup inside the test cases for the ones under
selftests/net/ (I'll defer the HW ones to David)
- Add more test coverage related to queue leasing behavior and corner
cases, so now we have 45 tests in nk_qlease.py with netdevsim
which does not need special HW
====================
Daniel Borkmann [Mon, 13 Apr 2026 22:08:06 +0000 (00:08 +0200)]
selftests/net: Add additional test coverage in nk_qlease
Add further netkit queue-lease coverage for netns lifecycle of the guest
and physical halves, channel resize across active leases, single-device
and multi-lessee scenarios, L3 mode operation, lease capacity exhaustion,
and corner-cases of e.g. queue-create rejection paths. Also make the tests
more robust by removing the time.sleep(0.1) after netns deletion and turn
them into a wait loop.
Full test run:
# ./nk_qlease.py
TAP version 13
1..45
ok 1 nk_qlease.test_remove_phys
ok 2 nk_qlease.test_double_lease
ok 3 nk_qlease.test_virtual_lessor
ok 4 nk_qlease.test_phys_lessee
ok 5 nk_qlease.test_different_lessors
ok 6 nk_qlease.test_queue_out_of_range
ok 7 nk_qlease.test_resize_leased
ok 8 nk_qlease.test_self_lease
ok 9 nk_qlease.test_create_tx_type
ok 10 nk_qlease.test_create_primary
ok 11 nk_qlease.test_create_limit
ok 12 nk_qlease.test_link_flap_phys
ok 13 nk_qlease.test_queue_get_virtual
ok 14 nk_qlease.test_remove_virt_first
ok 15 nk_qlease.test_multiple_leases
ok 16 nk_qlease.test_lease_queue_tx_type
ok 17 nk_qlease.test_invalid_netns
ok 18 nk_qlease.test_invalid_phys_ifindex
ok 19 nk_qlease.test_multi_netkit_remove_phys
ok 20 nk_qlease.test_single_remove_phys
ok 21 nk_qlease.test_link_flap_virt
ok 22 nk_qlease.test_phys_queue_no_lease
ok 23 nk_qlease.test_same_ns_lease
ok 24 nk_qlease.test_resize_after_unlease
ok 25 nk_qlease.test_lease_queue_zero
ok 26 nk_qlease.test_release_and_reuse
ok 27 nk_qlease.test_veth_queue_create
ok 28 nk_qlease.test_two_netkits_same_queue
ok 29 nk_qlease.test_l3_mode_lease
ok 30 nk_qlease.test_single_double_lease
ok 31 nk_qlease.test_single_different_lessors
ok 32 nk_qlease.test_cross_ns_netns_id
ok 33 nk_qlease.test_delete_guest_netns
ok 34 nk_qlease.test_move_guest_netns
ok 35 nk_qlease.test_resize_phys_no_reduction
ok 36 nk_qlease.test_delete_one_netkit_of_two
ok 37 nk_qlease.test_bind_rx_leased_phys_queue
ok 38 nk_qlease.test_resize_phys_shrink_past_leased
ok 39 nk_qlease.test_resize_virt_not_supported
ok 40 nk_qlease.test_lease_devices_down
ok 41 nk_qlease.test_lease_capacity_exhaustion
ok 42 nk_qlease.test_resize_phys_up
ok 43 nk_qlease.test_multi_ns_lease
ok 44 nk_qlease.test_multi_ns_delete_one
ok 45 nk_qlease.test_move_phys_netns
# Totals: pass:45 fail:0 xfail:0 xpass:0 skip:0 error:0
Daniel Borkmann [Mon, 13 Apr 2026 22:08:04 +0000 (00:08 +0200)]
tools/ynl: Make YnlFamily closeable as a context manager
YnlFamily opens an AF_NETLINK socket in __init__ but has no way
to release it other than leaving it to the GC. YnlFamily holds a
self reference cycle through SpecFamily's self.family = self
in its super().__init__() call, so refcount GC cannot reclaim
it and the socket stays open until the cyclic GC runs.
If a test creates a guest netns, instantiates a YnlFamily inside
it via NetNSEnter(), performs some test case work via Ynl, and
then deletes the netns, then the 'ip netns del' only drops the
mount binding and cleanup_net in the kernel never runs, so any
subsequent test case assertions that objects got cleaned up would
fail given this only gets triggered later via cyclic GC run.
Add an explicit close() that closes the netlink socket and wire
up the __enter__/__exit__ so callers can scope the instance
deterministically via 'with YnlFamily(...) as ynl: ...'.
Steven Rostedt [Tue, 14 Apr 2026 15:03:44 +0000 (11:03 -0400)]
tracefs: Removed unused 'ret' variable in eventfs_iterate()
Moving to guard() usage removed the need of using the 'ret' variable but
it wasn't removed. As it was set to zero, the compiler in use didn't warn
(although some compilers do).
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260414110344.75c0663f@robin Fixes: 4d9b262031f ("eventfs: Simplify code using guard()s") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202604100111.AAlbQKmK-lkp@intel.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
TOMOYO is treating numeric fields (including inode->i_ino) as "unsigned
long". Now that commit 0b2600f81cef ("treewide: change inode->i_ino from
unsigned long to u64") went upstream, update affected portions in TOMOYO.
While an administrator might write a rule that compares inode->i_ino with
an immediate value, this patch changes type of variable for inode->i_ino
to "u64" but does not change type of variable for the corresponding
immediate value to "u64" due to the following reasons.
It is likely that rules that compare inode->i_ino are for testing whether
the directories involved in e.g. rename() operation are the same (i.e.
comparison between two inode->i_ino values rather than one inode->i_ino
value and one immediate value).
It unlikely makes sense to compare inode->i_ino with an immediate value
larger than UINT_MAX.
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
snd_ctl_elem_init_enum_names() advances pointer p through the names
buffer while decrementing buf_len. If buf_len reaches zero but items
remain, the next iteration calls strnlen(p, 0).
While strnlen(p, 0) returns 0 and would hit the existing name_len == 0
error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks
maxlen against __builtin_dynamic_object_size(). When Clang loses track
of p's object size inside the loop, this triggers a BRK exception panic
before the return value is examined.
Add a buf_len == 0 guard at the loop entry to prevent calling fortified
strnlen() on an exhausted buffer.
Found by kernel fuzz testing through Xiaomi Smartphone.
Fixes: 8d448162bda5 ("ALSA: control: add support for ENUMERATED user space controls") Cc: stable@vger.kernel.org Signed-off-by: Ziqing Chen <chenziqing@xiaomi.com> Link: https://patch.msgid.link/20260414132437.261304-1-chenziqing@xiaomi.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lorenzo Bianconi [Sun, 12 Apr 2026 08:43:26 +0000 (10:43 +0200)]
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
Add the following PPE configuration in airoha_ppe_hw_init routine:
- 6RD hw offloading is currently not supported by Netfilter flowtable.
Disable explicitly PPE 6RD offloading in order to prevent PPE to learn
6RD flows and eventually interrupt the traffic.
- Add missing PPE bind rate configuration for L3 and L2 traffic.
PPE bind rate configuration specifies the pps threshold to move a PPE
entry state from UNBIND to BIND. Without this configuration this value
is random.
- Set ageing thresholds to the values used in the vendor SDK in order to
improve connection stability under load and avoid packet loss caused by
fast aging.
spi: dt-bindings: fsl: Correct GPIO flags in the example
IRQ_TYPE_xxx flags are not correct in the context of GPIO flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: IRQ_TYPE_EDGE_RISING = 1 = GPIO_ACTIVE_LOW.
Correct the example DTS to use proper flags for chip select GPIOs,
assuming the author of the code wanted similar logical behavior:
drm/mxsfb/lcdif: use DRM_BRIDGE_ATTACH_NO_CONNECTOR and the bridge-connector
Convert this driver to DRM_BRIDGE_ATTACH_NO_CONNECTOR and to the
drm_bridge_connector framework which is the current DRM bridge best
practice.
Based on the in-tree dts[i] files this introduces no regression. Based on
the kernel doc of drm_bridge_connector.c:
* To make use of this helper, all bridges in the chain shall report bridge
* operation flags (&drm_bridge->ops) and bridge output type
* (&drm_bridge->type), as well as the DRM_BRIDGE_ATTACH_NO_CONNECTOR attach
* flag (none of the bridges shall create a DRM connector directly).
and each of the 3 LCDIF blocks in the i.MX8MP, all of them comply with the
above requirement:
* fsl,imx8mp-hdmi-pvi has ops = 0 (it doesn't set it) because it
implements none the optional features mentioned by those flags, and it
honors the DRM_BRIDGE_ATTACH_NO_CONNECTOR by propagating it
* fsl,imx8mp-hdmi-tx is implemented based on dw-hdmi, which sets ops as
appropriate and also propagates the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag
* display-connector (enabled via the DT overlay if needed) sets ops and
makes DRM_BRIDGE_ATTACH_NO_CONNECTOR mandatory
* The LCDIF2 involves the panel-bridge, display-connector and lvds-decoder
(even though only the pane-bridge is currently supported), and all these
three also set ops as needed and propagate
DRM_BRIDGE_ATTACH_NO_CONNECTOR or make it mandatory.
* The LCDIF1 is used with the adv7511, tc358767 and the panel bridge
drivers which also comply with the requirements.
Tested-by: Martyn Welch <martyn.welch@collabora.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL Reviewed-by: Liu Ying <victor.liu@nxp.com> Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-11-247a16e61ef9@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm/bridge: imx8mp-hdmi-tx: switch to DRM_BRIDGE_ATTACH_NO_CONNECTOR
The imx8mp-hdmi-tx one of many drivers based on dw-hdmi. dw-hdmi in turn
can operate in two different modes, depending on the platform data as set
by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used [0]
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
The imx8mp-hdmi-tx driver falls in case A. Switching to case B, which is
the current best practice, requires that the HDMI connector is always
described in the live device tree, and a previous commit ensured this is
always the case by adding an overlay in case the device tree does not
comply.
So now we can simply switch to the new mode and support
DRM_BRIDGE_ATTACH_NO_CONNECTOR.
drm/bridge: imx8mp-hdmi-tx-connector-fixup: show a warning when adding the overlay
Describing the HDMI connector in device tree is recommended. While the
overlay insertion is a workaround to avoid breaking existing devices, every
dts should be improved by adding a connector description.
Add a warning to make users aware as far as possible.
As a warning line cannot hold all the relevant info, add a detailed comment
in the code so it easy to find when the warning is seen.
drm/bridge: imx8mp-hdmi-tx-connector-fixup: add an hdmi-connector when missing using a DT overlay at boot time
The imx8mp-hdmi-tx is one of many drivers based on dw-hdmi. dw-hdmi in turn
can operate in two different modes, depending on the platform data as set
by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used [0]
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
The imx8mp-hdmi-tx driver falls in case A. This implies next_bridge will
always be NULL, and so dw_hdmi_bridge_attach() [1] will always fail if
called with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
In fact case A assumes that DRM_BRIDGE_ATTACH_NO_CONNECTOR is not set and
in that case it adds an HDMI Type A connector programmatically at bridge
attach time.
Support for DRM_BRIDGE_ATTACH_NO_CONNECTOR is implemented by dw-hdmi.c in
case B. However switching to base B requires that port@1 is connected to a
"next bridge" DT node, typically the HDMI connector, because dw-hdmi won't
add the connector when using DRM_BRIDGE_ATTACH_NO_CONNECTOR.
Many dts files for imx8mp-based boards in the kernel have such a connector
described and linked to port@1, so the pipeline will be fully attached up
to a display-connector and a drm_connector added by the
bridge-connector. Sadly some of those dts files don't have the connector
described. Adding it would solve the problem easily, but this would break
existing devices which do not update the dtb when upgrading to a newer
kernel.
In preparation for switching to case B while preserving backward
compatibility for such devices, introduce a module adding the
hdmi-connector node to the live device tree at init time. This will allow
the dw-hdmi code to find the next bridge (the one wrapping the
hdmi-connector) and let the pipeline work as before.
The module is inserted only if there is no endpoint in port@1. So boards
whose device tree describe the connector will not have the device tre
modified, and will start isntantiating the correct HDMI connector type as
described in the device tree.
For boards lacking a connector description in DT the overlay will be added,
abd the HDMI connector will be Type A, which is a reasonable fallback and
is what the driver is currently doing.
drm/bridge: dw-hdmi: move next_bridge lookup to attach time
This driver looks up the next_bridge at probe time and stores it in
hdmi->bridge.next_bridge, but only uses the stored value when attaching,
and only in the DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
This will be problematic with an upcoming change, adding an hdmi-connector
using a device tree overlay when not present. That change is in turn
necessary to migrate the i.MX LCDIF driver to the bridge-connector.
The problem is that, adding the hdmi-connector via an overlay, devlink
considers hdmi-connector a consumer of the dw-hdmi device, generating a
chicken-egg problem:
* hdmi-connector probe won't be tried until dw-hdmi is probed (devlink)
* dw-hdmi probe will defer until it finds the next_bridge (the
hdmi-connector wrapper bridge)
In preparation for those changes, move the next_bridge lookup from probe to
attach, when it is actually used. This allows dw-hdmi to probe, so that the
hdmi-connector can probe as well.
Also avoid storing the pointer in hdmi->bridge.next_bridge: the value is
computed when needed, thus a local variable is enough.
Finally, this also allows to slightly improve the code by not doing any DT
lookup in the !DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
drm/bridge: dw-hdmi: warn on unsupported attach combination
dw-hdmi can operate in two different modes, depending on the platform data
as set by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
Only case B is supported when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is
passed to the attach callback. Emit a warning when this is violated. Also
return -EINVAL which would be returned by drm_bridge_attach() right after
anyway.
drm/mxsfb/lcdif: move iteration-specific variables declaration inside loop in lcdif_attach_bridge
The bridge and ret variables are per-iteration variables, whose values
don't have to be carried to the next iteration or be used after the loop
end. Move their declaration inside the loop scope as a cleanup and to make
code clearer.
drm/mxsfb/lcdif: use dev_err_probe() consistently in lcdif_attach_bridge
lcdif_attach_bridge() uses dev_err_probe() in some error paths, dev_err() +
return in others. Use dev_err_probe() for all of them to make code
consistent, simpler and with better error reporting.
The platform name will be used in the topology name.
Fixes: d3df422f66e8a ("ASoC: SOF: Intel: add initial support for NVL-S") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20260413060800.3156425-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
The platform name will be used in the topology name.
Fixes: 1800bcdc68ead ("ASoC: SOF: Intel: add support for Nova Lake NVL") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20260413060800.3156425-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Lorenzo Bianconi [Sun, 12 Apr 2026 07:57:29 +0000 (09:57 +0200)]
net: airoha: Fix VIP configuration for AN7583 SoC
EN7581 and AN7583 SoCs have different VIP definitions. Introduce
get_vip_port callback in airoha_eth_soc_data struct in order to take
into account EN7581 and AN7583 VIP register layout and definition
differences.
Introduce nbq parameter in airoha_gdm_port struct. At the moment nbq
is set statically to value previously used in airhoha_set_gdm2_loopback
routine and it will be read from device tree in subsequent patches.
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless.
Fixes: 43e369210108 ("caif: Move refcount from service layer to sock and dev.") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/9f3d37847c0037568aae698ca23cd47c6691acb0.1775897577.git.zcliangcn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shuming Fan [Tue, 14 Apr 2026 07:14:41 +0000 (15:14 +0800)]
ASoC: rt1320: fix the warning 'rae_fw' from request_firmware() not released
New smatch warnings:
sound/soc/codecs/rt1320-sdw.c:1575 rt1320_rae_load() warn: 'rae_fw' from
request_firmware() not released on lines: 1575.
Fixes: 22937af75abb ("ASoC: rt1320: support RAE parameters loading") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202604111548.EL450PMb-lkp@intel.com/ Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://patch.msgid.link/20260414071441.1524039-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
drm/xe/pf: Derive admin-only PF mode from xe_device state
Stop tracking admin-only PF mode in a separate `xe->sriov.pf.admin_only`
field and use `xe_device_is_admin_only(xe)` as the single source of
admin mode.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patch.msgid.link/20260413095637.2871287-2-satyanarayana.k.v.p@intel.com
drm/xe/pf: Restrict device query responses in admin-only PF mode
When a PF is configured in admin-only mode, it is intended for management
only and must not expose workload-facing capabilities to userspace.
Limit the exposed ioctl set in admin-only PF mode to XE_DEVICE_QUERY and
XE_OBSERVATION, and suppress capability-bearing query payloads so that
the userspace cannot discover execution-related device details in this
mode.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Dunajski Bartosz <bartosz.dunajski@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patch.msgid.link/20260409154423.2499340-5-satyanarayana.k.v.p@intel.com
net: strparser: fix skb_head leak in strp_abort_strp()
When the stream parser is aborted, for example after a message assembly timeout,
it can still hold a reference to a partially assembled message in
strp->skb_head.
That skb is not released in strp_abort_strp(), which leaks the partially
assembled message and can be triggered repeatedly to exhaust memory.
Fix this by freeing strp->skb_head and resetting the parser state in the
abort path. Leave strp_stop() unchanged so final cleanup still happens in
strp_done() after the work and timer have been synchronized.
Fixes: 43a0c6751a32 ("strparser: Stream parser for messages") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Luxiao Xu <rakukuip@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/ade3857a9404999ce9a1c27ec523efc896072678.1775482694.git.rakukuip@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ALSA: usb-audio: Fix missing error handling for get_min_max*()
The recent fix to add the error return value check from get_min_max*()
missed one case in build_audio_procunit() where no error value is set.
This may lead to an uninitialized variable and confuse the caller
(although this wouldn't happen practically because err is set for the
loop of num_ins at the beginning of the funciton).
Fix it by setting "err = 0" properly at the missing case, too.
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
dw_mipi_dsi_host_attach() and dw_mipi_dsi2_host_attach() call
drm_bridge_add() before pdata->host_ops->attach(). If attach fails,
the bridge stayed registered without drm_bridge_remove(), leaking the
bridge reference and leaving the device on the global bridge list.
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver.
Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: stable <stable@kernel.org> Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2026041134-dreamboat-buddhism-d1ec@gregkh Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tom Zanussi [Mon, 13 Apr 2026 22:35:38 +0000 (17:35 -0500)]
selftests/ftrace: Add test case for fully-qualified variable references
This test adds a variable (ts0) to two events (sched_waking and
sched_wakeup) and uses a fully-qualified variable reference to expicitly
choose a particular one (sched_wakeup.$ts0) when calculating the wakeup
latency.
Tom Zanussi [Mon, 13 Apr 2026 22:35:37 +0000 (17:35 -0500)]
tracing: Fix fully-qualified variable reference printing in histograms
The syntax for fully-qualified variable references in histograms is
subsys.event.$var, which is parsed correctly, but not displayed correctly
when printing a histogram spec. The current code puts the $ reference at
the beginning of the fully-qualified variable name i.e. $subsys.event.var,
which is incorrect.
Douglas Anderson [Tue, 14 Apr 2026 02:59:11 +0000 (19:59 -0700)]
driver core: Add kernel-doc for DEV_FLAG_COUNT enum value
Even though nobody should use this value (except when declaring the
"flags" bitmap), kernel-doc still gets upset that it's not documented.
It reports:
WARNING: ../include/linux/device.h:519
Enum value 'DEV_FLAG_COUNT' not described in enum 'struct_device_flags'
Add the description of DEV_FLAG_COUNT.
Fixes: a2225b6e834a ("driver core: Don't let a device probe until it's ready") Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/f318cd43-81fd-48b9-abf7-92af85f12f91@infradead.org Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20260413195910.1.I23aca74fe2d3636a47df196a80920fecb2643220@changeid Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This function gets a device_node reference via
of_graph_get_remote_port_parent() and stores it in encoder_node, but never
puts that reference. Add it.
There used to be a of_node_put(encoder_node) but it has been removed by
mistake during a rework in commit 3ea66a794fdc ("drm/arc: Inline
arcpgu_drm_hdmi_init").
David Carlier [Mon, 13 Apr 2026 19:06:01 +0000 (20:06 +0100)]
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.
For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.
Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration.
Fixes: 8cf868affdc4 ("tracing: Have the reg function allow to fail") Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260413190601.21993-1-devnexen@gmail.com Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ring-buffer: Prevent off-by-one array access in ring_buffer_desc_page()
As pointed out by Smatch, the ring-buffer descriptor array page_va is
counted by nr_page_va, but the accessor ring_buffer_desc_page() allows
access off by one.
Currently, this does not cause problems, as the page ID always comes
from a trusted source. Nonetheless, ensure robustness and fix the
accessor. While at it, make the page_id unsigned.
tracing: Rebuild full_name on each hist_field_name() call
hist_field_name() uses a static MAX_FILTER_STR_VAL buffer for fully
qualified variable-reference names, but it currently appends into that
buffer with strcat() without rebuilding it first. As a result, repeated
calls append a new "system.event.field" name onto the previous one,
which can eventually run past the end of full_name.
Build the name with snprintf() on each call and return NULL if the fully
qualified name does not fit in MAX_FILTER_STR_VAL.
Link: https://patch.msgid.link/20260401112224.85582-1-pengpeng@iscas.ac.cn Fixes: 067fe038e70f ("tracing: Add variable reference handling to hist triggers") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Tested-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
====================
net,bpf: fix null-ptr-deref in xdp_master_redirect() for bonding and add selftest
From: Jiayuan Chen <jiayuan.chen@shopee.com>
This series has gone through several rounds of discussion and the
maintainers hold different views on where the fix should live (in the
generic xdp_master_redirect() path vs. inside bonding). I respect all
of the suggestions, but I would like to get the crash fixed first, so
this version takes the approach of checking whether the master device
is up in xdp_master_redirect(), as suggested by Daniel Borkmann. If a
different shape is preferred later it can be done as a follow-up, but
the null-ptr-deref should not linger.
syzkaller reported a kernel panic, full decoded trace here:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
Problem Description
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter without a NULL
check. rr_tx_counter is a per-CPU counter that bonding only allocates
in bond_open() when the mode is round-robin. If the bond device was
never brought up, rr_tx_counter stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Solution
Patch 1: Fix this in the generic xdp_master_redirect() by skipping
master interception when the master device is not running. Returning
XDP_TX keeps the original XDP_TX behaviour on the receiving slave, and
avoids calling into any master ->ndo_xdp_get_xmit_slave() on a device
that has not fully initialized its XDP state. This is not specific to
bonding: any current or future master that defers XDP state allocation
to ->ndo_open() is protected.
Patch 2: Add a selftest that reproduces the above scenario.
selftests/bpf: add test for xdp_master_redirect with bond not up
Add a selftest that reproduces the null-ptr-deref in
bond_rr_gen_slave_id() when XDP redirect targets a bond device in
round-robin mode that was never brought up. The test verifies the fix
by ensuring no crash occurs.
Test setup:
- bond0: active-backup mode, UP, with native XDP (enables
bpf_master_redirect_enabled_key globally)
- bond1: round-robin mode, never UP
- veth1: slave of bond1, with generic XDP (XDP_TX)
- BPF_PROG_TEST_RUN with live frames triggers the redirect path
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected.
Fixes: 879af96ffd72 ("net, core: Add support for XDP redirection to slave device") Reported-by: syzbot+80e046b8da2820b6ba73@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/698f84c6.a70a0220.2c38d7.00cc.GAE@google.com/T/ Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://patch.msgid.link/20260411005524.201200-2-jiayuan.chen@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cao Ruichuang [Mon, 6 Apr 2026 16:53:33 +0000 (00:53 +0800)]
ring-buffer: Report header_page overwrite as char
The header_page tracefs metadata currently reports overwrite as an
int field with size 1. That makes parsers warn about a type and
size mismatch even though the field is only used as a one-byte flag
within commit.
Keep the shared offset with commit as-is, but report overwrite as
char so the declared type matches the hardcoded size. The signedness
is already carried separately by the emitted signed field.
selftests/namespaces: remove unused utils.h include from listns_efault_test
Remove the inclusion of ../filesystems/utils.h from listns_efault_test.c.
The test doesn't use any symbols from that header. Including it alongside
../pidfd/pidfd.h causes a build failure because both headers define
wait_for_pid() with conflicting linkage:
../filesystems/utils.h: extern int wait_for_pid(pid_t pid);
../pidfd/pidfd.h: static inline int wait_for_pid(pid_t pid)
All symbols the test actually uses (create_child, read_nointr,
write_nointr, sys_pidfd_send_signal) come from pidfd.h.
selftests/fsmount_ns: add missing TARGETS and fix cap test
Add missing top-level kselftest TARGETS entries for empty_mntns and
fsmount_ns so that 'make kselftest' discovers and runs these tests.
Fix requires_cap_sys_admin test which always SKIPped because fsopen()
was called after enter_userns(), where CAP_SYS_ADMIN in the mount
namespace's user_ns is unavailable. Move fsopen/fsconfig before fork so
the configured fs_fd is inherited by the child, which then only needs to
call fsmount() after dropping privileges.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests") Signed-off-by: Christian Brauner <brauner@kernel.org>
empty_mntns.h includes ../statmount/statmount.h which provides a
4-argument statmount_alloc(mnt_id, mnt_ns_id, mask, flags), but then
redefines its own 3-argument version without the flags parameter. This
causes a build failure due to conflicting types.
Remove the duplicate definition from empty_mntns.h and update all
callers to pass 0 for the flags argument.
Fixes: 32f54f2bbccf ("selftests/filesystems: add tests for empty mount namespaces") Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the local static wait_for_pid() definition from
statmount_test_ns.c as it conflicts with the extern declaration in
utils.h. The identical function is already provided by utils.c.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests") Cc: <stable@kernel.org> # mainline only Signed-off-by: Christian Brauner <brauner@kernel.org>
In the OPEN_TREE_NAMESPACE path vfs_open_tree() resolves a path via
filename_lookup() without holding namespace_lock. Between the lookup
and create_new_namespace() acquiring namespace_lock via
LOCK_MOUNT_EXACT_COPY() another thread can unmount the mount, setting
mnt->mnt_ns to NULL.
When create_new_namespace() then checks !mnt->mnt_ns it incorrectly
takes the swap-and-mntget path that was designed for fsmount()'s
detached mounts. This reuses a mount whose mnt_mp_list is in an
inconsistent state from the concurrent unmount, causing a general
protection fault in __umount_mnt() -> hlist_del_init(&mnt->mnt_mp_list)
during namespace teardown.
Remove the !mnt->mnt_ns special case entirely. Instead, always
duplicate the mount:
- For OPEN_TREE_NAMESPACE use __do_loopback() which will properly
clone the mount or reject it via may_copy_tree() if it was
unmounted in the race window.
- For fsmount() use clone_mnt() directly (via the new MOUNT_COPY_NEW
flag) since the mount is freshly created by vfs_create_mount() and
not in any namespace so __do_loopback()'s IS_MNT_UNBINDABLE,
may_copy_tree, and __has_locked_children checks don't apply.
Reported-by: syzbot+e4470cc28308f2081ec8@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
ALSA: hda/realtek: Add quirk for Acer PT316-51S headset mic
The Acer PT316-51S (PCI SSID 1025:160e) with ALC287 codec does not
detect the headset microphone due to missing BIOS pin configuration
for pin 0x19. Apply ALC2XX_FIXUP_HEADSET_MIC to enable it.
projects / thirdparty / linux.git / log
