Alex Deucher [Thu, 23 Apr 2026 16:29:03 +0000 (12:29 -0400)]
drm/amd/display: properly handle family setting for early GC 11.5.4
Early variants need an override.
Fixes: 57d00816c6a9 ("drm/amdgpu: set family for GC 11.5.4") Cc: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Cc: Roman Li <Roman.Li@amd.com> Cc: Mario Limonciello <superm1@kernel.org> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 922fccc2d3f8186008c19ba08a49ae8a9463cb50)
drm/amd/display: Update MCIF_ADDR macro to address IGT DWB regression
[Why]
A previous warning-fix commit updated type casts in the DCN3
mmhubbub code but missed updating the MCIF_ADDR macro to the
correct, fully parenthesized and casted version. This caused
a regression during DWB tests, where address values could be
misinterpreted, potentially leading to incorrect hardware
programming.
[How]
Updated the MCIF_ADDR macro in dcn30_mmhubbub.c to use the
proper parenthesization and type casting, ensuring correct
address handling. Removed redundant casts from REG_UPDATE
calls for improved clarity and consistency with current
coding standards.
Fixes: f4cdbb5d5405 ("drm/amd/display: Fix implicit narrowing conversion warnings") Reviewed-by: Clayton King <clayton.king@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4f251a5e9f2297023b00b7cab606de111931cfa3)
Christian König [Mon, 20 Apr 2026 14:08:35 +0000 (16:08 +0200)]
drm/amdgpu: rework userq fence signal processing
Move more code into a common userq function.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 12f52fab11500d0dce7d23c71909eaf0cf9aa701)
drm/amdgpu: fix build for CONFIG_DRM_FBDEV_EMULATION=n
The merge-commit 02e778f12359 ("Merge tag 'amd-drm-next-7.1-2026-03-12' of
https://gitlab.freedesktop.org/agd5f/linux into drm-next") removes the stub
for drm_fb_helper_gem_is_fb(), so the buld gets broken if DRM_FBDEV_EMULATION
is not set.
‘drm_fb_helper_gem_is_fb’; did you mean ‘drm_fb_helper_from_client’? [-Wimplicit-function-declaration]
1777 | if (!drm_fb_helper_gem_is_fb(dev->fb_helper, fb->obj[0])) {
| ^~~~~~~~~~~~~~~~~~~~~~~
| drm_fb_helper_from_client
Restore it.
Fixes: 02e778f12359 ("Merge tag 'amd-drm-next-7.1-2026-03-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Yury Norov <ynorov@nvidia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b81bc38e92c2522484c42671401eaa023ae8831)
tracing: branch: Fix inverted check on stat tracer registration
init_annotated_branch_stats() and all_annotated_branch_stats() check the
return value of register_stat_tracer() with "if (!ret)", but
register_stat_tracer() returns 0 on success and a negative errno on
failure. The inverted check causes the warning to be printed on every
successful registration, e.g.:
Warning: could not register annotated branches stats
while leaving real failures silent. The initcall also returned a
hard-coded 1 instead of the actual error.
Invert the check and propagate ret so that the warning fires on real
errors and the initcall reports the correct status.
ipmi: Add limits to event and receive message requests
The driver would just fetch events and receive messages until the
BMC said it was done. To avoid issues with BMCs that never say they are
done, add a limit of 10 fetches at a time.
In addition, an si interface has an attn state it can return from the
hardware which is supposed to cause a flag fetch to see if the driver
needs to fetch events or message or a few other things. If the attn
bit gets stuck, it's a similar problem. So allow messages in between
flag fetches so the driver itself doesn't get stuck.
This is a more general fix than the previous fix for the specific bad
BMC, but should fix the more general issue of a BMC that won't stop
saying it has data.
This has been there from the beginning of the driver. It's not a bug
per-se, but it is accounting for bugs in BMCs.
scx_flush_disable_work() calls irq_work_sync() followed by
kthread_flush_work() to ensure that the disable kthread work has
fully completed before bpf_scx_unreg() frees the SCX scheduler.
However, a concurrent scx_vexit() (e.g., triggered by a watchdog stall)
creates a race window between scx_claim_exit() and irq_work_queue():
CPU A (scx_vexit (watchdog)) CPU B (bpf_scx_unreg)
---- ----
scx_claim_exit()
atomic_try_cmpxchg(NONE->kind)
stack_trace_save()
vscnprintf()
scx_disable()
scx_claim_exit() -> FAIL
scx_flush_disable_work()
irq_work_sync() // no-op: not queued yet
kthread_flush_work() // no-op: not queued yet
kobject_put(&sch->kobj) -> free %sch
irq_work_queue() -> UAF on %sch
scx_disable_irq_workfn()
kthread_queue_work() -> UAF
The root cause is that CPU B's scx_flush_disable_work() returns after
syncing an irq_work that has not yet been queued, while CPU A is still
executing the code between scx_claim_exit() and irq_work_queue().
Loop until exit_kind reaches SCX_EXIT_DONE or SCX_EXIT_NONE, draining
disable_irq_work and disable_work in each pass. This ensures that any
work queued after the previous check is caught, while also correctly
handling cases where no disable was triggered (e.g., the
scx_sub_enable_workfn() abort path).
HID: uclogic: Fix regression of input name assignment
The previous fix for adding the devm_kasprintf() return check in the
commit bd07f751208b ("HID: uclogic: Add NULL check in
uclogic_input_configured()") changed the condition of hi->input->name
assignment, and it resulted in missing the proper input device name
when no custom suffix is defined.
Restore the conditional to the original content to address the
regression.
Matthew Schwartz [Mon, 20 Apr 2026 18:15:22 +0000 (11:15 -0700)]
HID: hid-lenovo-go-s: restore OS_TYPE after resume from s2idle
The controller MCU does not persist OS_TYPE across power cycles. During
s2idle resume, the USB device may be power-cycled, causing the OS_TYPE
setting to revert to the default Windows value.
Add a reset_resume callback so that this is correctly restored after
resume.
Fixes: a23f3497bf208c59ad ("HID: hid-lenovo-go-s: Add Lenovo Legion Go S Series HID Driver") Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com> Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com>
Kuba Piecuch [Tue, 28 Apr 2026 12:46:01 +0000 (12:46 +0000)]
sched_ext: Call wakeup_preempt() in local_dsq_post_enq()
There are several edge cases (see linked thread) where an IMMED task
can be left lingering on a local DSQ if an RT task swoops in at the
wrong time. All of these edge cases are due to rq->next_class being idle
even after dispatching a task to rq's local DSQ. We should bump
rq->next_class to &ext_sched_class as soon as we've inserted a task into
the local DSQ.
To optimize the common case of rq->next_class == &ext_sched_class,
only call wakeup_preempt() if rq->next_class is below EXT. If next_class
is EXT or above, wakeup_preempt() is a no-op anyway.
This lets us also simplify the preempt_curr() logic a bit since
wakeup_preempt() will call preempt_curr() for us if next_class is
below EXT.
HID: sony: add missing size validation for Rock Band 3 Pro instruments
This commit adds the missing size validation for Rock Band 3 PS3 Pro
instruments in sony_raw_event(), this prevents a malicious device from
allowing hid-sony to read out of bounds of the provided buffer.
HID: sony: add missing size validation for SMK-Link remotes
This commit adds the missing size validation for SMK-Link remotes in
sony_raw_event(), this prevents a malicious device from allowing
hid-sony to read out of bounds of the provided buffer.
I do not own these devices so the size check only forces that the buffer
is large enough for nsg_mrxu_parse_report().
HID: sony: remove unneeded WARN_ON() in sony_leds_init()
This commit removes the unneeded WARN_ON() macro usage in
sony_leds_init(), this is unneeded because the sony_leds_init() function
call is already gated behind a SONY_LED_SUPPORT check in
sony_input_configured()
Michael Zaidman [Sat, 11 Apr 2026 06:24:37 +0000 (09:24 +0300)]
HID: ft260: validate i2c input report length
Add two checks to ft260_raw_event() to prevent out-of-bounds reads
from malicious or malfunctioning devices:
First, reject reports shorter than the 2-byte header (report ID +
length fields). Without this, even accessing xfer->length on a
1-byte report is an OOB read.
Second, validate xfer->length against the actual data capacity of
the received HID report. Each I2C data report ID (0xD0 through
0xDE) defines a different report size in the HID descriptor, so the
available payload varies per report. A corrupted length field could
cause memcpy to read beyond the report buffer.
Reported-by: Sebastián Josué Alba Vives <sebasjosue84@gmail.com> Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: sony: fix incorrect force-feedback check in sony_suspend()
This commit fixes the incorrect force-feedback check in sony_suspend(),
without this the check will always be true due to checking a constant
define that is never 0.
C does not allow forwarding a va_list through a ... parameter.
alloc_workqueue() expands to alloc_workqueue_noprof(), which runs
its own va_start() over its ... params, so the inner
vsnprintf(wq->name, sizeof(wq->name), fmt, args) in
__alloc_workqueue() received the outer va_list object as the first
variadic slot rather than the caller's actual format arguments.
Add a new static helper alloc_workqueue_va() that wraps
__alloc_workqueue() and runs wq_init_lockdep() on success, and
fold both alloc_workqueue_noprof() and devm_alloc_workqueue_noprof()
onto it as suggested by Tejun.
The wq_init_lockdep() step is required on the devm path
too, otherwise __flush_workqueue()'s on-stack
COMPLETION_INITIALIZER_ONSTACK_MAP would NULL-deref wq->lockdep_map.
No caller changes are required. devm_alloc_ordered_workqueue() is
a macro forwarding to devm_alloc_workqueue() and inherits the fix.
Two in-tree callers actively trigger the broken path on every probe:
iio: chemical: scd30: fix division by zero in write_raw
Add a zero check for val2 before using it as a divisor when setting the
sampling frequency. A user writing a zero fractional part to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
The driver acquired the ADC clock with devm_clk_get() and read its
rate, but never called clk_prepare_enable(). The probe error path and
npcm_adc_remove() both called clk_disable_unprepare() unconditionally,
causing the clk framework's enable/prepare counts to underflow on
probe failure or module unbind.
The issue went unnoticed because NPCM BMC firmware leaves the ADC
clock enabled at boot, so the driver happened to work in practice.
Switch to devm_clk_get_enabled() so the clock is properly enabled
during probe and automatically released by the device-managed
cleanup, and drop the now-redundant clk_disable_unprepare() from
both the probe error path and remove().
While at it, drop the duplicate error message on devm_request_irq()
failure since the IRQ core already logs it.
Fixes: 9bf85fbc9d8f ("iio: adc: add NPCM ADC driver") Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Andy Shevchenko [Thu, 16 Apr 2026 09:01:22 +0000 (11:01 +0200)]
iio: adc: nxp-sar-adc: Avoid division by zero
When Common Clock Framework is disabled, clk_get_rate() returns 0.
This is used as part of the divisor to perform nanosecond delays
with help of ndelay(). When the above condition occurs the compiler,
due to unspecified behaviour, is free to do what it wants to. Here
it saturates the value, which is logical from mathematics point of
view. However, the ndelay() implementation has set a reasonable
upper threshold and refuses to provide anything for such a long
delay. That's why code may not be linked under these circumstances.
To solve the issue, provide a wrapper that calls ndelay() when
the value is known not to be zero.
Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202603311958.ly6uROit-lkp@intel.com/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: Fix iio_multiply_value use in iio_read_channel_processed_scale
The function iio_multiply_value returns IIO_VAL_INT (1) on success or a
negative error number on failure, while iio_read_channel_processed_scale
should return an error code or 0. This creates a situation where the
expected result is treated as an error. Fix this by checking the
iio_multiply_value result separately, instead of passing it as a return
value.
Fixes: 05f958d003c9 ("iio: Improve iio_read_channel_processed_scale() precision") Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Antoniu Miclaus [Tue, 31 Mar 2026 10:13:00 +0000 (13:13 +0300)]
iio: gyro: adis16260: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero to the sampling_frequency sysfs
attribute triggers a division by zero in the kernel.
Fixes: 089a41985c6c ("staging: iio: adis16260 digital gyro driver") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Radu Sabau [Wed, 8 Apr 2026 10:32:13 +0000 (13:32 +0300)]
iio: adc: ad4695: Fix call ordering in offload buffer postenable
ad4695_enter_advanced_sequencer_mode() was called after
spi_offload_trigger_enable(). That is wrong because
ad4695_enter_advanced_sequencer_mode() issues regular SPI transfers to
put the ADC into advanced sequencer mode, and not all SPI offload capable
controllers support regular SPI transfers while offloading is enabled.
Fix this by calling ad4695_enter_advanced_sequencer_mode() before
spi_offload_trigger_enable(), so the ADC is fully configured before the
first CNV pulse can occur. This is consistent with the same constraint
that already applies to the BUSY_GP_EN write above it.
Update the error unwind labels accordingly: add err_exit_conversion_mode
so that a failure of spi_offload_trigger_enable() correctly exits
conversion mode before clearing BUSY_GP_EN.
Fixes: f09f140e3ea8 ("iio: adc: ad4695: Add support for SPI offload") Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Radu Sabau <radu.sabau@analog.com> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Felix Gu [Fri, 27 Mar 2026 12:27:54 +0000 (20:27 +0800)]
iio: light: veml6070: Fix resource leak in probe error path
The driver calls i2c_new_dummy_device() to create a dummy device,
then calls i2c_smbus_write_byte(). If i2c_smbus_write_byte() fails and
returns, the cleanup via devm_add_action_or_reset() was never registered,
so the dummy device leaks.
Switch to devm_i2c_new_dummy_device() which registers cleanup atomically
with device creation, eliminating the error-path window.
Fixes: 7501bff87c3e ("iio: light: veml6070: add action for i2c_unregister_device") Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Felix Gu <ustc.gu@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: chemical: mhz19b: reject oversized serial replies
mhz19b_receive_buf() appends each serdev chunk into the fixed
MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without
checking that the chunk fits in the remaining space. A large callback
can therefore overflow st->buf before the command path validates the
reply.
Reset the reply state before each command and reject oversized serial
replies before copying them into the fixed buffer. When an oversized
reply is detected, wake the waiter and report -EMSGSIZE instead of
overwriting st->buf.
Fixes: 4572a70b3681 ("iio: chemical: Add support for Winsen MHZ19B CO2 sensor") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Acked-by: Gyeyoung Baek <gye976@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: adc: xilinx-xadc: Fix sequencer mode in postdisable for dual mux
xadc_postdisable() unconditionally sets the sequencer to continuous
mode. For dual external multiplexer configurations this is incorrect:
simultaneous sampling mode is required so that ADC-A samples through
the mux on VAUX[0-7] while ADC-B simultaneously samples through the
mux on VAUX[8-15]. In continuous mode only ADC-A is active, so
VAUX[8-15] channels return incorrect data.
Since postdisable is also called from xadc_probe() to set the initial
idle state, the wrong sequencer mode is active from the moment the
driver loads.
The preenable path already uses xadc_get_seq_mode() which returns
SIMULTANEOUS for dual mux. Fix postdisable to do the same.
Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: stable@vger.kernel.org Signed-off-by: Christofer Jonason <christofer.jonason@guidelinegeo.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Salih Erim <salih.erim@amd.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Johan Hovold [Fri, 24 Apr 2026 10:32:11 +0000 (12:32 +0200)]
parisc: drivers: switch to dynamic root device
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function
is ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
While at it, drop the redundant additional reference taken at init.
Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Junrui Luo [Fri, 24 Apr 2026 05:51:02 +0000 (13:51 +0800)]
RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init()
mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When
ib_create_srq() fails for s1, the error branch destroys s0 but falls
through and unconditionally assigns the freed s0 and the ERR_PTR s1 to
devr->s0 and devr->s1.
This leads to several problems: the lock-free fast path checks
"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;
users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via
to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences
the ERR_PTR and double-frees s0 on teardown.
Fix by adding the same `goto unlock` in the s1 failure path.
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero.
Cc: stable@vger.kernel.org Fixes: 034e285f8b99 ("RDMA/rxe: Make responder support atomic write on RC service") Link: https://patch.msgid.link/r/20260418162141.3610201-1-michael.bommarito@gmail.com Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
RDMA/rxe: Reject unknown opcodes before ICRC processing
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The
rxe_opcode[] array has 256 entries but is only populated for defined IB
opcodes; any other entry (for example opcode 0xff) is zero-initialized, so
length == 0 and the check degenerates to
pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE
which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes
rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES
which underflows when length == 0 and passes a huge value to rxe_crc32(),
causing an out-of-bounds read of the skb payload.
Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with
CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after
rdma link add rxe0 type rxe netdev eth0
A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and
QPN=IB_MULTICAST_QPN triggers:
BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170
Read of size 1 at addr ...
The buggy address is located 0 bytes to the right of
allocated 704-byte region
Call Trace:
crc32_le+0x115/0x170
rxe_icrc_hdr.isra.0+0x226/0x300
rxe_icrc_check+0x13f/0x3a0
rxe_rcv+0x6e1/0x16e0
rxe_udp_encap_recv+0x20a/0x320
udp_queue_rcv_one_skb+0x7ed/0x12c0
Subsequent packets with the same shape fault on unmapped memory and panic
the kernel. The trigger requires only module load and "rdma link add"; no
QP, no connection, and no authentication.
Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,
detected via the zero mask or zero length, before any length arithmetic
runs.
Cc: stable@vger.kernel.org Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://patch.msgid.link/r/20260414111555.3386793-1-michael.bommarito@gmail.com Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge tag 'md-7.1-20260428' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-7.1
Pull MD fixes from Yu Kuai:
"Bug Fixes:
- Fix a raid5 UAF on IO across the reshape position.
- Avoid failing RAID1/RAID10 devices for invalid IO errors.
- Fix RAID10 divide-by-zero when far_copies is zero.
- Restore bitmap grow through sysfs.
Cleanups:
- Use mddev_is_dm() instead of open-coding gendisk checks.
- Use ATTRIBUTE_GROUPS() for md default sysfs attributes.
- Replace open-coded wait loops with wait_event helpers."
* tag 'md-7.1-20260428' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
md/raid1: replace wait loop with wait_event_idle() in raid1_write_request()
md/md-bitmap: add a none backend for bitmap grow
md/md-bitmap: split bitmap sysfs groups
md: factor bitmap creation away from sysfs handling
md: use mddev_lock_nointr() in mddev_suspend_and_lock_nointr()
md: replace wait loop with wait_event() in md_handle_request()
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
md/raid1,raid10: don't fail devices for invalid IO errors
MAINTAINERS: Add Xiao Ni as md/raid reviewer
md/raid5: Fix UAF on IO across the reshape position
Li RongQing [Fri, 6 Feb 2026 05:08:36 +0000 (00:08 -0500)]
IB/hfi1: Fix potential use-after-free in PIO and SDMA map teardown
The current teardown logic for dd->pio_map and dd->sdma_map frees the
structures while they might still be accessed by RCU readers. Although the
pointer is nulled under a spinlock, the memory is reclaimed before waiting
for the grace period to end.
This patch fixes the sequence by:
1. Extracting the pointer under the lock.
2. Clearing the RCU-protected pointer.
3. Waiting for readers to finish with synchronize_rcu().
4. Finally freeing the memory.
Table 7-121 in datasheet says we have to set register 0xc6
to value 0x10 before CLK_O_SEL can be modified. No more infos
about this field found in datasheet. With this fix, setting
of CLK_O_SEL field in IO_MUX_CFG register worked through dts
property "ti,clk-output-sel" on a DP83869HMRGZR.
Signed-off-by: Heiko Schocher <hs@nabladev.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy") Link: https://patch.msgid.link/20260425031339.3318-1-hs@nabladev.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Carlier [Wed, 15 Apr 2026 05:23:00 +0000 (06:23 +0100)]
mm/memfd_luo: report error when restoring a folio fails mid-loop
memfd_luo_retrieve_folios() initialises err to -EIO, but the per-iteration
calls to mem_cgroup_charge(), shmem_add_to_page_cache() and
shmem_inode_acct_blocks() reuse and overwrite err. Once any iteration
completes successfully, err becomes zero.
If a later iteration's kho_restore_folio() returns NULL, the failure path
jumps to put_folios without resetting err, so the function returns 0.
The caller memfd_luo_retrieve() then takes the success path, sets
args->file and reports the restore as successful, leaving userspace with
a partially populated memfd and no indication that anything went wrong.
Set err to -EIO in the kho_restore_folio() failure branch so the error
is propagated to the caller.
kho_fill_kimage() unconditionally populates the kimage with KHO
metadata for every kexec image type. When the image is a crash kernel,
this can be problematic as the crash kernel can run in a small reserved
region and the KHO scratch areas can sit outside it.
The crash kernel then faults during kho_memory_init() when it
tries phys_to_virt() on the KHO FDT address:
Unable to handle kernel paging request at virtual address xxxxxxxx
...
fdt_offset_ptr+...
fdt_check_node_offset_+...
fdt_first_property_offset+...
fdt_get_property_namelen_+...
fdt_getprop+...
kho_memory_init+...
mm_core_init+...
start_kernel+...
kho_locate_mem_hole() already skips KHO logic for KEXEC_TYPE_CRASH
images, but kho_fill_kimage() was missing the same guard. As
kho_fill_kimage() is the single point that populates image->kho.fdt
and image->kho.scratch, fixing it here is sufficient for both arm64
and x86 as the FDT and boot_params path are bailing out when these
fields are unset.
Fixes: d7255959b69a ("kho: allow kexec load before KHO finalization") Signed-off-by: Evangelos Petrongonas <epetron@amazon.de> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Link: https://patch.msgid.link/20260410011609.1103-1-epetron@amazon.de Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
ntfs: fix invalid PTR_ERR() usage in __ntfs_bitmap_set_bits_in_run()
The Smatch reported a warning in __ntfs_bitmap_set_bits_in_run():
"warn: passing a valid pointer to 'PTR_ERR'"
This occurs because the 'folio' variable might contain a valid pointer
when jumping to the 'rollback' label, specifically when 'cnt <= 0' is
detected during the subsequent page mapping loop. In such cases,
calling PTR_ERR(folio) is incorrect as it does not contain an error
code.
Fix this by introducing an explicit 'err' variable to track the error
status. This ensures that the rollback logic and the return value
consistently use a proper error code regardless of the state of the
folio pointer.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Remove the SCLP_OFB Kconfig option and enable the guarded code
unconditionally. This guards only a few lines of code, so the impact is
very low while at the same time this reduces the large number of Kconfig
options.
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
s390/debug: Reject zero-length input in debug_input_flush_fn()
debug_input_flush_fn() always copies one byte from the userspace buffer
with copy_from_user() regardless of the supplied write length. A
zero-length write therefore reads one byte beyond the caller's buffer.
If the stale byte happens to be '-' or a digit the debug log is
silently flushed. With an unmapped buffer the call returns -EFAULT.
Reject zero-length writes before copying from userspace.
s390/debug: Reject zero-length input before trimming a newline
debug_get_user_string() duplicates the userspace buffer with
memdup_user_nul() and then unconditionally looks at buffer[user_len - 1]
to strip a trailing newline.
A zero-length write reaches this helper unchanged, so the newline trim
reads before the start of the allocated buffer.
Reject empty writes before accessing the last input byte.
Add a real none bitmap backend that exposes the common bitmap sysfs
group and use it to keep bitmap/location available when an array has no
bitmap.
Then switch the bitmap location sysfs path to move only between none
and the classic bitmap backend, using the no-sysfs bitmap helpers while
merging or unmerging the internal bitmap sysfs group.
This restores mdadm --grow bitmap addition through bitmap/location.
Split the classic bitmap sysfs files into a common bitmap group with
the location attribute and a separate internal bitmap group for the
remaining files.
At the same time, convert bitmap operations from a single sysfs group
to a sysfs group array so backends can share part of their sysfs
layout while adding backend-specific attributes separately.
Switch the bitmap sysfs helpers to use sysfs_update_groups() for the
add and update path, and remove groups in reverse order so shared named
groups are unmerged before the last group removes the directory.
Also make bitmap operation lookup depend only on the currently selected
bitmap id matching the installed backend. This prepares the lookup path
for a later registered none backend.
md: factor bitmap creation away from sysfs handling
Factor bitmap creation and destruction into helpers that do not touch
bitmap sysfs registration.
This prepares the bitmap sysfs rework so callers such as the sysfs
bitmap location path can create or destroy a bitmap backend without
coupling that to sysfs group lifetime management.
Junrui Luo [Thu, 16 Apr 2026 03:39:56 +0000 (11:39 +0800)]
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
setup_geo() extracts near_copies (nc) and far_copies (fc) from the
user-provided layout parameter without checking for zero. When fc=0
with the "improved" far set layout selected, 'geo->far_set_size =
disks / fc' triggers a divide-by-zero.
Validate nc and fc immediately after extraction, returning -1 if
either is zero.
Keith Busch [Thu, 16 Apr 2026 14:03:45 +0000 (07:03 -0700)]
md/raid1,raid10: don't fail devices for invalid IO errors
BLK_STS_INVAL indicates the IO request itself was invalid, not that the
device has failed. When raid1 treats this as a device error, it retries
on alternate mirrors which fail the same way, eventually exceeding the
read error threshold and removing the device from the array.
This happens when stacking configurations bypass bio_split_to_limits()
in the IO path: dm-raid calls md_handle_request() directly without going
through md_submit_bio(), skipping the alignment validation that would
otherwise reject invalid bios early. The invalid bio reaches the
lower block layers, which fail the bio with BLK_STS_INVAL, and raid1
wrongly interprets this as a device failure.
Add BLK_STS_INVAL to raid1_should_handle_error() so that invalid IO
errors are propagated back to the caller rather than triggering device
removal. This is consistent with the previous kernel behavior when
alignment checks were done earlier in the direct-io path.
Fixes: 5ff3f74e145adc7 ("block: simplify direct io validity check") Reported-by: Tomáš Trnka <trnka@scm.com> Closes: https://lore.kernel.org/linux-block/2982107.4sosBPzcNG@electra/ Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: Tomáš Trnka <trnka@scm.com> Link: https://lore.kernel.org/r/20260416140345.3872265-1-kbusch@meta.com Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Xiao Ni [Tue, 14 Apr 2026 02:29:56 +0000 (10:29 +0800)]
MAINTAINERS: Add Xiao Ni as md/raid reviewer
I've been actively involved in the md subsystem, contributing bug
fixes, performance improvements, and participating in code reviews.
I will help improve patch review coverage and response time.
md/raid5: Fix UAF on IO across the reshape position
If make_stripe_request() returns STRIPE_WAIT_RESHAPE,
raid5_make_request() will free the cloned bio. But raid5_make_request()
can call make_stripe_request() multiple times, writing to the various
stripes. If that bio got added to the toread or towrite lists of a
stripe disk in an earlier call to make_stripe_request(), then it's not
safe to just free the bio if a later part of it is found to cross the
reshape position. Doing so can lead to a UAF error, when bio_endio()
is called on the bio for the earlier stripes.
Instead, raid5_make_request() needs to wait until all parts of the bio
have called bio_endio(). To do this, bios that cross the reshape
position while the reshape can't make progress are flagged as needing to
wait for all parts to complete. When raid5_make_request() has a bio that
failed make_stripe_request() with STRIPE_WAIT_RESHAPE, it sets
bi->bi_private to a completion struct and waits for completion after
ending the bio. When the bio_endio() is called for the last time on a
clone bio with bi->bi_private set, it wakes up the waiter. This
guarantees that raid5_make_request() doesn't return until the cloned bio
needing a retry for io across the reshape boundary is safely cleaned up.
There is a simple reproducer available at [1]. Compile the kernel with
KASAN for more useful reporting when the error is triggered (this is not
necessary to see the bug).
lib/fonts: Fix bit position when rotating by 180 degrees
Fix the horizontal bit position when rotating a glyph by 180°. The
original code in rotate_ud() rounded the value in width up to a
multiple of 8, aka the bit pitch, and calculated the rotated pixel
from that value. The new code stores the glyph's pitch in bit_pitch,
but fails to update the rotated pixel's output accordingly. Simply
replacing the variable does this.
The bug can be reproduced by setting a font with an unaligned width,
such as sun12x22, like this:
Randy Dunlap [Mon, 27 Apr 2026 18:32:36 +0000 (11:32 -0700)]
fbdev: ipu-v3: clean up kernel-doc warnings
Correct all kernel-doc warnings:
- fix a typedef kernel-doc comment
- mark a list_head as private
- use Returns: for function return values
Warning: include/video/imx-ipu-image-convert.h:31 struct member 'list' not
described in 'ipu_image_convert_run'
Warning: include/video/imx-ipu-image-convert.h:40 function parameter
'ipu_image_convert_cb_t' not described in 'void'
Warning: include/video/imx-ipu-image-convert.h:40 expecting prototype for
ipu_image_convert_cb_t(). Prototype was for void() instead
Warning: include/video/imx-ipu-image-convert.h:66 No description found for
return value of 'ipu_image_convert_verify'
Warning: include/video/imx-ipu-image-convert.h:90 No description found for
return value of 'ipu_image_convert_prepare'
Warning: include/video/imx-ipu-image-convert.h:125 No description found for
return value of 'ipu_image_convert_queue'
Warning: include/video/imx-ipu-image-convert.h:163 No description found for
return value of 'ipu_image_convert'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Helge Deller <deller@gmx.de>
net: mctp i2c: check length before marking flow active
Currently, mctp_i2c_get_tx_flow_state() is called before the packet length
sanity check. This function marks a new flow as active in the MCTP core.
If the sanity check fails, mctp_i2c_xmit() returns early without calling
mctp_i2c_lock_nest(). This results in a mismatched locking state: the
flow is active, but the I2C bus lock was never acquired for it.
When the flow is later released, mctp_i2c_release_flow() will see the
active state and queue an unlock marker. The TX thread will then
decrement midev->i2c_lock_count from 0, causing it to underflow to -1.
This underflow permanently breaks the driver's locking logic, allowing
future transmissions to occur without holding the I2C bus lock, leading
to bus collisions and potential hardware hangs.
Move the mctp_i2c_get_tx_flow_state() call to after the length sanity
check to ensure we only transition the flow state if we are actually
going to proceed with the transmission and locking.
Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver") Signed-off-by: William A. Kennington III <william@wkennington.com> Acked-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://patch.msgid.link/20260423074741.201460-1-william@wkennington.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Huth [Mon, 27 Apr 2026 15:56:30 +0000 (17:56 +0200)]
efi: pstore: Drop efivar lock when efi_pstore_open() returns with an error
If kzalloc fails, the function returns -ENOMEM without calling
efivar_unlock(). Since open() returned an error, the calling site
in pstore_get_backend_records() won't call the close() function, so
the lock is never released. Thus drop the lock in case of errors here.
Sam Edwards [Wed, 22 Apr 2026 04:45:03 +0000 (21:45 -0700)]
net: stmmac: Prevent NULL deref when RX memory exhausted
The CPU receives frames from the MAC through conventional DMA: the CPU
allocates buffers for the MAC, then the MAC fills them and returns
ownership to the CPU. For each hardware RX queue, the CPU and MAC
coordinate through a shared ring array of DMA descriptors: one
descriptor per DMA buffer. Each descriptor includes the buffer's
physical address and a status flag ("OWN") indicating which side owns
the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set
the flag and the MAC is only allowed to clear it, and both must move
through the ring in sequence: thus the ring is used for both
"submissions" and "completions."
In the stmmac driver, stmmac_rx() bookmarks its position in the ring
with the `cur_rx` index. The main receive loop in that function checks
for rx_descs[cur_rx].own=0, gives the corresponding buffer to the
network stack (NULLing the pointer), and increments `cur_rx` modulo the
ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its
position with `dirty_rx`, allocates fresh buffers and rearms the
descriptors (setting OWN=1). If it fails any allocation, it simply stops
early (leaving OWN=0) and will retry where it left off when next called.
This means descriptors have a three-stage lifecycle (terms my own):
- `empty` (OWN=1, buffer valid)
- `full` (OWN=0, buffer valid and populated)
- `dirty` (OWN=0, buffer NULL)
But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In
the past (see 'Fixes:'), there was a bug where the loop could cycle
`cur_rx` all the way back to the first descriptor it dirtied, resulting
in a NULL dereference when mistaken for `full`. The aforementioned
commit resolved that *specific* failure by capping the loop's iteration
limit at `dma_rx_size - 1`, but this is only a partial fix: if the
previous stmmac_rx_refill() didn't complete, then there are leftover
`dirty` descriptors that the loop might encounter without needing to
cycle fully around. The current code therefore panics (see 'Closes:')
when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to
catch up to `dirty_rx`.
Fix this by explicitly checking, before advancing `cur_rx`, if the next
entry is dirty; exit the loop if so. This prevents processing of the
final, used descriptor until stmmac_rx_refill() succeeds, but
fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix
intended: so remove the clamp as well. Since stmmac_rx_zc() is a
copy-paste-and-tweak of stmmac_rx() and the code structure is identical,
any fix to stmmac_rx() will also need a corresponding fix for
stmmac_rx_zc(). Therefore, apply the same check there.
In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the
MAC sets OWN=0 on the final descriptor, it will be unable to send any
further DMA-complete IRQs until it's given more `empty` descriptors.
Currently, the driver simply *hopes* that the next stmmac_rx_refill()
succeeds, risking an indefinite stall of the receive process if not. But
this is not a regression, so it can be addressed in a future change.
Fixes: b6cb4541853c7 ("net: stmmac: avoid rx queue overrun") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221010 Cc: stable@vger.kernel.org Suggested-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Sam Edwards <CFSworks@gmail.com> Link: https://patch.msgid.link/20260422044503.5349-1-CFSworks@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Maulik Shah [Thu, 23 Apr 2026 11:25:24 +0000 (16:55 +0530)]
pinctrl: qcom: Fix GPIO to PDC wake irq map for qcs615
PDC interrupts 122-125 were meant for ibi_i3c wakeup but qcs615 do not
support i3c. GPIOs 39,51,88 and 89 are also connected to different PDC
pin to support non-ibi wakeup. Update the wakeirq map to reflect same.
Fixes: b698f36a9d40 ("pinctrl: qcom: add the tlmm driver for QCS615 platform") Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Signed-off-by: Navya Malempati <navya.malempati@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
Accessing the pinconf-pins sysfs node may deadlock.
pinconf_pins_show() holds pctldev->mutex, and the platform driver
calls pinctrl_find_gpio_range_from_pin(), which tries to acquire
the same mutex again, leading to a deadlock.
Use pinctrl_find_gpio_range_from_pin_nolock() to fix this issue.
Fixes: 6e9be3abb78c ("pinctrl: Add driver support for Amlogic SoCs") Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Linus Walleij <linusw@kernel.org>
Andrea Mayer [Tue, 21 Apr 2026 09:47:35 +0000 (11:47 +0200)]
net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels
seg6_input_core() and rpl_input() call ip6_route_input() which sets a
NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking
dst_hold() unconditionally.
On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can
release the underlying pcpu_rt between the lookup and the caching
through a concurrent FIB lookup on a shared nexthop.
Simplified race sequence:
ksoftirqd/X higher-prio task (same CPU X)
----------- --------------------------------
seg6_input_core(,skb)/rpl_input(skb)
dst_cache_get()
-> miss
ip6_route_input(skb)
-> ip6_pol_route(,skb,flags)
[RT6_LOOKUP_F_DST_NOREF in flags]
-> FIB lookup resolves fib6_nh
[nhid=N route]
-> rt6_make_pcpu_route()
[creates pcpu_rt, refcount=1]
pcpu_rt->sernum = fib6_sernum
[fib6_sernum=W]
-> cmpxchg(fib6_nh.rt6i_pcpu,
NULL, pcpu_rt)
[slot was empty, store succeeds]
-> skb_dst_set_noref(skb, dst)
[dst is pcpu_rt, refcount still 1]
rt_genid_bump_ipv6()
-> bumps fib6_sernum
[fib6_sernum from W to Z]
ip6_route_output()
-> ip6_pol_route()
-> FIB lookup resolves fib6_nh
[nhid=N]
-> rt6_get_pcpu_route()
pcpu_rt->sernum != fib6_sernum
[W <> Z, stale]
-> prev = xchg(rt6i_pcpu, NULL)
-> dst_release(prev)
[prev is pcpu_rt,
refcount 1->0, dead]
dst = skb_dst(skb)
[dst is the dead pcpu_rt]
dst_cache_set_ip6(dst)
-> dst_hold() on dead dst
-> WARN / use-after-free
For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without
PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release
the pcpu_rt. Shared nexthop objects provide such a path, as two routes
pointing to the same nhid share the same fib6_nh and its rt6i_pcpu
entry.
Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after
ip6_route_input() to force the NOREF dst into a refcounted one before
caching.
The output path is not affected as ip6_route_output() already returns a
refcounted dst.
Fixes: af4a2209b134 ("ipv6: sr: use dst_cache in seg6_input") Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel") Cc: stable@vger.kernel.org Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Justin Iurman <justin.iurman@gmail.com> Link: https://patch.msgid.link/20260421094735.20997-1-andrea.mayer@uniroma2.it Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shixiong Ou [Fri, 24 Apr 2026 12:44:27 +0000 (20:44 +0800)]
drm/udl: Increase GET_URB_TIMEOUT
[WHY]
A situation has occurred where udl_handle_damage() executed successfully
and the kernel log appears normal, but the display fails to show any output.
This is because the call to udl_get_urb() in udl_crtc_helper_atomic_enable()
failed without generating any error message.
[HOW]
1. Increase timeout of getting urb.
2. Add error messages when calling udl_get_urb() failed in
udl_crtc_helper_atomic_enable().
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v3.4+ Link: https://patch.msgid.link/20260424124427.657-1-oushixiong1025@163.com
Cássio Gabriel [Tue, 28 Apr 2026 02:38:41 +0000 (23:38 -0300)]
ASoC: Intel: bytcr_wm5102: Fix MCLK leak on platform_clock_control error
If byt_wm5102_prepare_and_enable_pll1() fails in the
SND_SOC_DAPM_EVENT_ON() path, platform_clock_control() returns after
clk_prepare_enable(priv->mclk) without disabling the clock again.
This leaks an MCLK enable reference on failed power-up attempts. Add the
missing clk_disable_unprepare() on the error path, matching the unwind
used by the other Intel platform_clock_control() implementations.
Fixes: 9a87fc1e0619 ("ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Link: https://patch.msgid.link/20260427-bytcr-wm5102-mclk-leak-v1-1-02b96d08e99c@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Jeongjun Park [Wed, 22 Apr 2026 17:38:46 +0000 (02:38 +0900)]
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
RSI driver use both self-exit(kthread_complete_and_exit) and external-stop
(kthread_stop) when killing a kthread. Generally, kthread_stop() is called
first, and in this case, no particular issues occur.
However, in rare instances where kthread_complete_and_exit() is called
first and then kthread_stop() is called, a UAF occurs because the kthread
object, which has already exited and been freed, is accessed again.
Therefore, to prevent this with minimal modification, you must remove
kthread_stop() and change the code to wait until the self-exit operation
is completed.
Cc: <stable@vger.kernel.org> Reported-by: syzbot+5de83f57cd8531f55596@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/69e5d03b.a00a0220.1bd0ca.0064.GAE@google.com/ Fixes: 4c62764d0fc2 ("rsi: improve kernel thread handling to fix kernel panic") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Link: https://patch.msgid.link/20260422173846.37640-1-aha310510@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sched/fair: Clear rel_deadline when initializing forked entities
A yield-triggered crash can happen when a newly forked sched_entity
enters the fair class with se->rel_deadline unexpectedly set.
The failing sequence is:
1. A task is forked while se->rel_deadline is still set.
2. __sched_fork() initializes vruntime, vlag and other sched_entity
state, but does not clear rel_deadline.
3. On the first enqueue, enqueue_entity() calls place_entity().
4. Because se->rel_deadline is set, place_entity() treats se->deadline
as a relative deadline and converts it to an absolute deadline by
adding the current vruntime.
5. However, the forked entity's deadline is not a valid inherited
relative deadline for this new scheduling instance, so the conversion
produces an abnormally large deadline.
6. If the task later calls sched_yield(), yield_task_fair() advances
se->vruntime to se->deadline.
7. The inflated vruntime is then used by the following enqueue path,
where the vruntime-derived key can overflow when multiplied by the
entity weight.
8. This corrupts cfs_rq->sum_w_vruntime, breaks EEVDF eligibility
calculation, and can eventually make all entities appear ineligible.
pick_next_entity() may then return NULL unexpectedly, leading to a
later NULL dereference.
A captured trace shows the effect clearly. Before yield, the entity's
vruntime was around:
This shows that the deadline had already become abnormally large before
yield_task_fair() copied it into vruntime.
rel_deadline is only meaningful when se->deadline really carries a
relative deadline that still needs to be placed against vruntime. A
freshly forked sched_entity should not inherit or retain this state.
Clear se->rel_deadline in __sched_fork(), together with the other
sched_entity runtime state, so that the first enqueue does not interpret
the new entity's deadline as a stale relative deadline.
Vincent Guittot [Wed, 22 Apr 2026 09:34:00 +0000 (11:34 +0200)]
sched/fair: Fix wakeup_preempt_fair() vs delayed dequeue
Similar to how pick_next_entity() must dequeue delayed entities, so too must
wakeup_preempt_fair(). Any delayed task being found means it is eligible and
hence past the 0-lag point, ready for removal.
Worse, by not removing delayed entities from consideration, it can skew the
preemption decision, with the end result that a short slice wakeup will not
result in a preemption.
Peter Zijlstra [Thu, 23 Apr 2026 11:22:22 +0000 (13:22 +0200)]
sched/fair: Fix the negative lag increase fix
Vincent reported that my rework of his original patch lost a little
something.
Specifically it got the return value wrong; it should not compare
against the old se->vlag, but rather against the current value. Since
the thing that matters is if the effective vruntime of an entity is
affected and the thing needs repositioning or not.
Fixes: 059258b0d424 ("sched/fair: Prevent negative lag increase during delayed dequeue") Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://patch.msgid.link/20260423094107.GT3102624%40noisy.programming.kicks-ass.net
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole.
ALSA: usb-audio: Fix potential leak of pd at parsing UAC3 streams
At parsing UAC3 streams, we allocate a PD object at each time, and
either assign or free it. But there is a case where the PD object may
be leaked; namely, in __snd_usb_parse_audio_interface() loop, when an
audioformat shares the same endpoint with others, it's put to a link
and returns from snd_usb_add_audio_stream(), but the PD is forgotten
afterwards. Overall, the treatment of PD object in the parser code is
a bit flaky, and we should be more careful about the object ownership.
This patch tries to fix the above case and improve the code a bit.
The pd object is now managed with the auto-cleanup in the loop, and
the ownership is updated when the pd object gets assigned to the
stream, which guarantees the release of the leftover object.
ALSA: caiaq: Don't abort when no input device is available
The previous fix to handle the error from setup_card() caused a
regression for the models that have no dedicated input device;
snd_usb_caiaq_input_init() just returns -EINVAL, and we treat it as a
fatal error although it should be ignored.
As a regression fix, change the error code to -ENODEV, and ignore this
error in the callee, to continue probing.
ALSA: caiaq: Fix potentially leftover ep1_in_urb at error path
The previous fix for handling the error from setup_card() missed that
an internal URB cdev->ep1_in_urb might have been already submitted
beforehand. In the normal case, this URB gets killed at the
disconnection, but in the error path, we didn't do it, hence there can
be a potential leak.
xfrm: Don't clobber inner headers when already set
On VXLAN over IPsec egress, xfrm{4,6}_transport_output() blindly
overwrite inner_transport_header (== the inner TCP header saved in VXLAN
iptunnel_handle_offloads() -> skb_reset_inner_headers()) with the
current transport_header (== the VXLAN outer UDP header set by
udp_tunnel_xmit_skb()).
This was a latent bug, harmless until commit [1] added a doff validation
check in qdisc_pkt_len_segs_init() for encapsulated GSO packets. With
the wrong inner_transport_header set by xfrm, qdisc_pkt_len_segs_init()
interprets inner_transport_header as a TCP header, reads doff=0 from the
upper byte of the VNI and drops the packet with DROP_REASON_SKB_BAD_GSO.
Besides the use in GSO to determine the header size of segmented
packets, inner_transport_header might be used by drivers to set up
inner checksum offloading by pointing the HW to the inner transport
header. A quick browse through available drivers shows that mlx5 uses
skb->csum_start specifically for this scenario, while others either
don't support VXLAN over IPsec crypto offload (ixgbe) or the HW is
capable of parsing the packets itself (nfp, Chelsio).
But in all cases, it is more correct to let the inner_transport_header
point to the innermost header instead of overwriting it in xfrm.
So fix this by guarding all four inner header save sites in
xfrm_output.c (xfrm{4,6}_transport_output, xfrm{4,6}_tunnel_encap_add)
with a check for skb->inner_protocol. When inner_protocol is set, a
tunnel layer (VXLAN, Geneve, GRE, etc.) has already saved the correct
inner header offsets and they must not be overwritten. When
inner_protocol is zero, no prior tunnel encapsulation exists and xfrm
must save the inner headers itself. The tunnel mode checks are only
added for completion, since they aren't strictly required, as
xfrm_output() forces software GSO in tunnel mode before encap.
This makes the previously added test pass:
# ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py
TAP version 13
1..4
ok 1 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v4_inner_v4
ok 2 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v4_inner_v6
ok 3 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v6_inner_v4
ok 4 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v6_inner_v6
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
[1] commit 7fb4c1967011 ("net: pull headers in qdisc_pkt_len_segs_init()") Fixes: f1bd7d659ef0 ("xfrm: Add encapsulation header offsets while SKB is not encrypted") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
There are VXLAN tests and IPsec tests, but there is no test that
combines the two protocols and exercises the tunnel-over-ipsec code
paths. Fix that by adding a traffic test with VXLAN and IPsec using
crypto offload. This is runnable on HW which supports ESP offload (so no
nsim unfortunately).
Traffic is done with iperf3 and the test validates that there are no
packet drops and iperf3 can get to at least 100 Mbps (a very
conservative value on today's crypto offload HW, as it can typically
reach multi-Gbps rates).
Ran right now, the test fails due to a recently exposed bug in xfrm,
which will be fixed in the next patch:
# ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py
TAP version 13
1..4
# Check| At ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py,
# line 161, in test_vxlan_ipsec_crypto_offload:
# Check| ksft_eq(drops_after - drops_before, 0,
# Check failed 189 != 0 TX drops during VXLAN+IPsec
# Check| At ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py,
# line 163, in test_vxlan_ipsec_crypto_offload:
# Check| ksft_ge(bw_gbps, 0.1,
# Check failed 0.0015058278404812596 < 0.1 Minimum 100Mbps over
# VXLAN+IPsec
not ok 1 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v4_inner_v4
...
tools/selftests: Use a sensible timeout value for iperf3 client
The default timeout of cmd() is 5 seconds and Iperf3Runner requests the
iperf3 client to run for 10 seconds, which clearly doesn't work since
commit [1] enforced the timeout parameter.
Use a value derived from duration as timeout (+5 seconds for
startup/teardown/various other overhead).
In aw88395_i2c_probe(), if `devm_gpiod_get_optional()` fails, it returns
an ERR_PTR() error pointer. The current code only prints a message and
continues execution, leaving `aw88395->reset_gpio` as an invalid pointer.
Later, in `aw88395_hw_reset()`, this invalid pointer is passed to
`gpiod_set_value_cansleep()`, which dereferences it and causes a kernel
panic.
For optional GPIOs, `devm_gpiod_get_optional()` returns NULL if the GPIO
is not defined in the DT, which is safe. If it returns an ERR_PTR, it
means a real error occurred (e.g., -EPROBE_DEFER) and the probe must be
aborted.
Also, since the GPIO is optional, remove the dev_err() log in
aw88395_hw_reset() when the GPIO is missing to match the optional
semantics. This also fixes a potential NULL pointer dereference as
aw_pa is not initialized when aw88395_hw_reset() is called.
netpoll_setup() decides whether to auto-populate the local source
address by testing np->local_ip.ip, which only inspects the first 4
bytes of the union inet_addr storage.
For an IPv6 netpoll whose caller-supplied local address has a zero
high-32 bits (::1, ::<suffix>, IPv4-mapped ::ffff:a.b.c.d, etc.), this
misdetects the address as unset (which they are not, but the first
4 bytes are empty), calls netpoll_take_ipv6() and overwrites it with
whatever matching link-local/global address the device happens to expose
first.
Introduce a helper netpoll_local_ip_unset() that picks the correct
family-aware test (ipv6_addr_any() for IPv6, !.ip for IPv4) and use it
from netpoll_setup().
Reproducer is something like:
echo "::2" > local_ip
echo 1 > enabled
cat local_ip
# before this fix: 2001:db8::1 (caller-supplied ::2 was clobbered)
# after this fix: ::2
tcp: make probe0 timer handle expired user timeout
tcp_clamp_probe0_to_user_timeout() computes remaining time in jiffies
using subtraction with an unsigned lvalue. If elapsed probing time
exceeds the configured TCP_USER_TIMEOUT, the underflow yields a large
value.
This ends up re-arming the probe timer for a full backoff interval
instead of expiring immediately, delaying connection teardown beyond
the configured timeout.
Fix this by preventing underflow so user-set timeout expiration is
handled correctly without extending the probe timer.
Mingming Cao [Fri, 24 Apr 2026 16:29:17 +0000 (09:29 -0700)]
ibmveth: Disable GSO for packets with small MSS
Some physical adapters on Power systems do not support segmentation
offload when the MSS is less than 224 bytes. Attempting to send such
packets causes the adapter to freeze, stopping all traffic until
manually reset.
Implement ndo_features_check to disable GSO for packets with small MSS
values. The network stack will perform software segmentation instead.
The 224-byte minimum matches ibmvnic
commit <f10b09ef687f> ("ibmvnic: Enforce stronger sanity checks
on GSO packets")
which uses the same physical adapters in SEA configurations.
The issue occurs specifically when the hardware attempts to perform
segmentation (gso_segs > 1) with a small MSS. Single-segment GSO packets
(gso_segs == 1) do not trigger the problematic LSO code path and are
transmitted normally without segmentation.
Add an ndo_features_check callback to disable GSO when MSS < 224 bytes.
Also call vlan_features_check() to ensure proper handling of VLAN packets,
particularly QinQ (802.1ad) configurations where the hardware parser may
not support certain offload features.
Validated using iptables to force small MSS values. Without the fix,
the adapter freezes. With the fix, packets are segmented in software
and transmission succeeds. Comprehensive regression testing completedd
(MSS tests, performance, stability).
Fixes: 8641dd85799f ("ibmveth: Add support for TSO") Cc: stable@vger.kernel.org Reviewed-by: Brian King <bjking1@linux.ibm.com> Tested-by: Shaik Abdulla <shaik.abdulla1@ibm.com> Tested-by: Naveed Ahmed <naveedaus@in.ibm.com> Signed-off-by: Mingming Cao <mmc@linux.ibm.com> Link: https://patch.msgid.link/20260424162917.65725-1-mmc@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neigh_xmit always releases the skb, except when no neighbour table is
found. But even the first added user of neigh_xmit (mpls) relied on
neigh_xmit to release the skb (or queue it for tx).
sashiko reported:
If neigh_xmit() is called with an uninitialized neighbor table (for
example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT
and bypasses its internal out_kfree_skb error path. Because the return
value of neigh_xmit() is ignored here, does this leak the SKB?
Assume full ownership and remove the last code path that doesn't
xmit or free skb.
With CONFIG_IP_MROUTE_MULTIPLE_TABLES=n, ipmr_fib_lookup()
does not check if net->ipv4.mrt is NULL.
Since default_device_exit_batch() is called after ->exit_rtnl(),
a device could receive IGMP packets and access net->ipv4.mrt
during/after ipmr_rules_exit_rtnl().
If ipmr_rules_exit_rtnl() had already cleared it and freed the
memory, the access would trigger null-ptr-deref or use-after-free.
Let's fix it by using RCU helper and free mrt after RCU grace
period.
In addition, check_net(net) is added to mroute_clean_tables()
and ipmr_cache_unresolved() to synchronise via mfc_unres_lock.
This prevents ipmr_cache_unresolved() from putting skb into
c->_c.mfc_un.unres.unresolved after mroute_clean_tables()
purges it.
For the same reason, timer_shutdown_sync() is moved after
mroute_clean_tables().
Since rhltable_destroy() holds mutex internally, rcu_work is
used, and it is placed as the first member because rcu_head
must be placed within <4K offset. mr_table is alraedy 3864
bytes without rcu_work.
Note that IP6MR is not yet converted to ->exit_rtnl(), so this
change is not needed for now but will be.
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno.
====================
net/sched: taprio: fix NULL pointer dereference in class dump
Patch 1/2 is the fix: replace NULL entries in q->qdiscs[] with the
global &noop_qdisc singleton so that control-plane dump paths, as well
as the existing NULL guards in the data-plane enqueue/dequeue paths,
cannot deref a NULL child qdisc.
Patch 2/2 is a tdc regression test that drives the graft + delete +
class-dump sequence on a multi-queue netdevsim device. It panics the
vulnerable kernel and passes on the fixed one.
====================
Weiming Shi [Wed, 22 Apr 2026 16:19:59 +0000 (00:19 +0800)]
selftests/tc-testing: add taprio test for class dump after child delete
Add a regression test for the NULL pointer dereference fixed in the
previous commit. Before the fix, taprio_graft() stored NULL into
q->qdiscs[cl - 1] when an explicitly grafted child qdisc was deleted
via RTM_DELQDISC; the next RTM_GETTCLASS dump then crashed the kernel
in taprio_dump_class() while reading child->handle.
The test installs a taprio root qdisc on a multi-queue netdevsim
device, grafts a pfifo child onto class 8001:1, deletes that child,
and then performs a class dump. On a fixed kernel the dump succeeds
and all eight taprio classes are listed; on an unpatched kernel the
class dump crashes, which surfaces as a test failure.
Weiming Shi [Wed, 22 Apr 2026 16:19:58 +0000 (00:19 +0800)]
net/sched: taprio: fix NULL pointer dereference in class dump
When a TAPRIO child qdisc is deleted via RTM_DELQDISC, taprio_graft()
is called with new == NULL and stores NULL into q->qdiscs[cl - 1].
Subsequent RTM_GETTCLASS dump operations walk all classes via
taprio_walk() and call taprio_dump_class(), which calls taprio_leaf()
returning the NULL pointer, then dereferences it to read child->handle,
causing a kernel NULL pointer dereference.
The bug is reachable with namespace-scoped CAP_NET_ADMIN on any kernel
with CONFIG_NET_SCH_TAPRIO enabled. On systems with unprivileged user
namespaces enabled, an unprivileged local user can trigger a kernel
panic by creating a taprio qdisc inside a new network namespace,
grafting an explicit child qdisc, deleting it, and requesting a class
dump. The RTM_GETTCLASS dump itself requires no capability.
Fix this by substituting &noop_qdisc when new is NULL in
taprio_graft(), a common pattern used by other qdiscs (e.g.,
multiq_graft()) to ensure the q->qdiscs[] slots are never NULL.
This makes control-plane dump paths safe without requiring individual
NULL checks.
Since the data-plane paths (taprio_enqueue and taprio_dequeue_from_txq)
previously had explicit NULL guards that would drop/skip the packet
cleanly, update those checks to test for &noop_qdisc instead. Without
this, packets would reach taprio_enqueue_one() which increments the root
qdisc's qlen and backlog before calling the child's enqueue; noop_qdisc
drops the packet but those counters are never rolled back, permanently
inflating the root qdisc's statistics.
After this change *old can be a valid qdisc, NULL, or &noop_qdisc.
Only call qdisc_put(*old) in the first case to avoid decreasing
noop_qdisc's refcount, which was never increased.
Fixes: 665338b2a7a0 ("net/sched: taprio: dump class stats for the actual q->qdiscs[]") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Tested-by: Weiming Shi <bestswngs@gmail.com> Link: https://patch.msgid.link/20260422161958.2517539-3-bestswngs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'xsa48x-7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"XSA-485 and XSA-487 security patches"
* tag 'xsa48x-7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: fix double free via VMA splitting
Buffer overflow in drivers/xen/sys-hypervisor.c
Paul Geurts [Wed, 22 Apr 2026 10:09:30 +0000 (12:09 +0200)]
NFC: trf7970a: Ignore antenna noise when checking for RF field
The main channel Received Signal Strength Indicator (RSSI) measurement
is used to determine whether an RF field is present or not. RSSI != 0
is interpreted as an RF Field is present. This does not take RF noise
and measurement inaccuracy into account, and results in false positives
in the field.
Define a noise level and make sure the RF field is only interpreted as
present when the RSSI is above the noise level.
Fixes: 851ee3cbf850 ("NFC: trf7970a: Don't turn on RF if there is already an RF field") Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Mark Greer <mgreer@animalcreek.com> Link: https://patch.msgid.link/20260422100930.581237-1-paul.geurts@prodrive-technologies.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Felix Gu [Mon, 27 Apr 2026 17:42:00 +0000 (01:42 +0800)]
spi: amlogic-spisg: initialize completion before requesting IRQ
Move init_completion(&spisg->completion) to before devm_request_irq()
to avoid a potential race condition where an interrupt could fire
before the completion structure is initialized.
net: usb: rtl8150: free skb on usb_submit_urb() failure in xmit
When rtl8150_start_xmit() fails to submit the tx URB, the URB is never
handed to the USB core and write_bulk_callback() will not run. The
driver returns NETDEV_TX_OK, which tells the networking stack that the
skb has been consumed, but nothing actually frees the skb on this
error path:
dev->tx_skb = skb;
...
if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
...
/* no kfree_skb here */
}
return NETDEV_TX_OK;
This leaks the skb on every submit failure and also leaves dev->tx_skb
pointing at memory that the driver itself may later free, which is
fragile.
Free the skb with dev_kfree_skb_any() in the error path and clear
dev->tx_skb so no stale pointer is left behind.
Zhan Jun [Thu, 23 Apr 2026 00:49:12 +0000 (08:49 +0800)]
net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()
syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()
when accessing skb->len for tx statistics after usb_submit_urb() has
been called:
BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760
drivers/net/usb/rtl8150.c:712
Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226
The URB completion handler write_bulk_callback() frees the skb via
dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU
in softirq context before usb_submit_urb() returns in the submitter,
so by the time the submitter reads skb->len the skb has already been
queued to the per-CPU completion_queue and freed by net_tx_action():
CPU A (xmit) CPU B (USB completion softirq)
------------ ------------------------------
dev->tx_skb = skb;
usb_submit_urb() --+
|-------> write_bulk_callback()
| dev_kfree_skb_irq(dev->tx_skb)
| net_tx_action()
| napi_skb_cache_put() <-- free
netdev->stats.tx_bytes |
+= skb->len; <-- UAF read
Fix it by caching skb->len before submitting the URB and using the
cached value when updating the tx_bytes counter.
The pre-existing tx_bytes semantics are preserved: the counter tracks
the original frame length (skb->len), not the ETH_ZLEN/USB-alignment
padded "count" value that is handed to the device. Changing that
would be a user-visible accounting change and is out of scope for
this UAF fix.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+3f46c095ac0ca048cb71@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/69e69ee7.050a0220.24bfd3.002b.GAE@google.com/ Closes: https://syzkaller.appspot.com/bug?extid=3f46c095ac0ca048cb71 Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Zhan Jun <zhanjun@uniontech.com> Link: https://patch.msgid.link/809895186B866C10+20260423004913.136655-1-zhangdandan@uniontech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6: rpl: reserve mac_len headroom when recompressed SRH grows
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards.
Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Cc: stable <stable@kernel.org> Reported-by: Anthropic Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2026042133-gout-unvented-1bd9@gregkh Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / thirdparty / linux.git / log
