dt-bindings: phy: sc8280xp-qmp-pcie: Disallow bifurcation register on Purwa

Neither of the two Gen4x4 PHYs found on Purwa supports bifurcation.
The PHY is however physically laid out as if it were to, since there
are two separate ports (A/B).

Split out a new if-then block to un-require the bifurcation register
handle to squash this warning:

purwa-iot-evk.dtb: phy@1bd4000 (qcom,x1p42100-qmp-gen4x4-pcie-phy): 'qcom,4ln-config-sel' is a required property

Fixes: 2e1ffd4c1805 ("dt-bindings: phy: qcom,qmp-pcie: Add X1P42100 PCIe Gen4x4 PHY")
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/linux-arm-msm/176857775469.1631885.16133311938753588148.robh@kernel.org/
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260610-topic-purwa_phy_shutup_warning-v2-1-951c1fbfe9b2@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 3a35120a77ec0ceb814a1cdcacff32fef32b4f7b..431e8cb5df84e94a612f4b0655ee9cb4261486d2 100644 (file)
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -136,13 +136,22 @@ allOf:
           items:
             - description: port a
             - description: port b
-      required:
-        - qcom,4ln-config-sel
     else:
       properties:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
+    then:
+      required:
+        - qcom,4ln-config-sel
+
   - if:
       properties:
         compatible: