From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Wed, 10 Jun 2026 15:19:50 +0000 (+0300)
Subject: dt-bindings: phy: lynx-10g: initial document
X-Git-Url: http://git.ipfire.org/index.cgi?a=commitdiff_plain;h=a7dc4e95d31c6bc674b24697aacadf7c6f1cbe6a;p=thirdparty%2Fkernel%2Flinux.git

dt-bindings: phy: lynx-10g: initial document

Add a schema for the 10G Lynx SerDes. This is very similar to the modern
form of the 28G Lynx SerDes, which is very much the intention.

There is intentionally no generic fsl,lynx-10g compatible string due to
the hardware inability to report its capabilities, despite having a
common register map.

We allow both forms of #phy-cells = <1> in the top-level provider
and #phy-cells = <0> in the per-lane provider for more flexibility to
consumers, and because the kernel code is shared with the 28G Lynx which
already has that support for compatibility reasons.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260610151952.2141019-15-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---

diff --git a/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml b/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml
new file mode 100644
index 0000000000000..2e7d0abfa71ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,lynx-10g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Lynx 10G SerDes PHY
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+
+description:
+  The 10G Lynx is a multi-protocol SerDes block which handles networking, PCIe,
+  SATA and other high-speed interfaces. It is present on most QorIQ and
+  Layerscape SoCs. The register map is common, but the integration is
+  SoC-specific, with the differences consisting in register endianness, the
+  number of lanes, protocol converters available per lane and their location in
+  the PCCR registers. Some SoCs have multiple SerDes blocks and those differ in
+  their protocol capabilities per lane.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1028a-serdes
+      - fsl,ls1046a-serdes1
+      - fsl,ls1046a-serdes2
+      - fsl,ls1088a-serdes1
+      - fsl,ls1088a-serdes2
+      - fsl,ls2088a-serdes1
+      - fsl,ls2088a-serdes2
+
+  reg:
+    maxItems: 1
+
+  big-endian: true
+
+  "#phy-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^phy@[0-7]$":
+    type: object
+    description: SerDes lane (single RX/TX differential pair)
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+        description: Lane index as seen in register map
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1028a-serdes
+              - fsl,ls1046a-serdes1
+              - fsl,ls1046a-serdes2
+              - fsl,ls1088a-serdes1
+              - fsl,ls1088a-serdes2
+    then:
+      patternProperties:
+        "^phy@[0-7]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1046a-serdes1
+            - fsl,ls1046a-serdes2
+    then:
+      required:
+        - big-endian
+    else:
+      properties:
+        big-endian: false
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      serdes@1ea0000 {
+        compatible = "fsl,ls1028a-serdes";
+        reg = <0x0 0x1ea0000 0x0 0xffff>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #phy-cells = <1>;
+
+        phy@0 {
+          reg = <0>;
+          #phy-cells = <0>;
+        };
+
+        phy@1 {
+          reg = <1>;
+          #phy-cells = <0>;
+        };
+
+        phy@2 {
+          reg = <2>;
+          #phy-cells = <0>;
+        };
+
+        phy@3 {
+          reg = <3>;
+          #phy-cells = <0>;
+        };
+      };
+    };