Jeff Hostetler [Fri, 25 Mar 2022 18:03:11 +0000 (18:03 +0000)]
fsmonitor--daemon: use a cookie file to sync with file system
Teach fsmonitor--daemon client threads to create a cookie file
inside the .git directory and then wait until FS events for the
cookie are observed by the FS listener thread.
This helps address the racy nature of file system events by
blocking the client response until the kernel has drained any
event backlog.
This is especially important on MacOS where kernel events are
only issued with a limited frequency. See the `latency` argument
of `FSeventStreamCreate()`. The kernel only signals every `latency`
seconds, but does not guarantee that the kernel queue is completely
drained, so we may have to wait more than one interval. If we
increase the latency, the system is more likely to drop events.
We avoid these issues by having each client thread create a unique
cookie file and then wait until it is seen in the event stream.
Co-authored-by: Kevin Willford <Kevin.Willford@microsoft.com> Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:03:10 +0000 (18:03 +0000)]
fsmonitor--daemon: periodically truncate list of modified files
Teach fsmonitor--daemon to periodically truncate the list of
modified files to save some memory.
Clients will ask for the set of changes relative to a token that they
found in the FSMN index extension in the index. (This token is like a
point in time, but different). Clients will then update the index to
contain the response token (so that subsequent commands will be
relative to this new token).
Therefore, the daemon can gradually truncate the in-memory list of
changed paths as they become obsolete (older than the previous token).
Since we may have multiple clients making concurrent requests with a
skew of tokens and clients may be racing to the talk to the daemon,
we lazily truncate the list.
We introduce a 5 minute delay and truncate batches 5 minutes after
they are considered obsolete.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:03:08 +0000 (18:03 +0000)]
t/perf/p7519: speed up test on Windows
Change p7519 to use `test_seq` and `xargs` rather than a `for` loop
to touch thousands of files. This takes minutes off of test runs
on Windows because of process creation overhead.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:03:06 +0000 (18:03 +0000)]
t/helper/test-chmtime: skip directories on Windows
Teach `test-tool.exe chmtime` to ignore errors when setting the mtime
on a directory on Windows.
NEEDSWORK: The Windows version of `utime()` (aka `mingw_utime()`) does
not properly handle directories because it uses `_wopen()`. It should
be converted to using `CreateFileW()` and backup semantics at a minimum.
Since I'm already in the middle of a large patch series, I did not want
to destabilize other callers of `utime()` right now. The problem has
only been observed in the t/perf/p7519 test when the test repo contains
an empty directory on disk.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:03:05 +0000 (18:03 +0000)]
t/perf: avoid copying builtin fsmonitor files into test repo
Do not copy any of the various fsmonitor--daemon files from the .git
directory of the (GIT_PREF_REPO or GIT_PERF_LARGE_REPO) source repo
into the test's trash directory.
When perf tests start, they copy the contents of the source repo into
the test's trash directory. If fsmonitor is running in the source repo,
there may be control files, such as the IPC socket and/or fsmonitor
cookie files. These should not be copied into the test repo.
Unix domain sockets cannot be copied in the manner used by the test
setup, so if present, the test setup fails.
Cookie files are harmless, but we should avoid them.
The builtin fsmonitor keeps all such control files/sockets in
.git/fsmonitor--daemon*, so it is simple to exclude them.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:03:02 +0000 (18:03 +0000)]
help: include fsmonitor--daemon feature flag in version info
Add the "feature: fsmonitor--daemon" message to the output of
`git version --build-options`.
The builtin FSMonitor is only available on certain platforms and
even then only when certain Makefile flags are enabled, so print
a message in the verbose version output when it is available.
This can be used by test scripts for prereq testing. Granted, tests
could just try `git fsmonitor--daemon status` and look for a 128 exit
code or grep for a "not supported" message on stderr, but these
methods are rather obscure.
The main advantage is that the feature message will automatically
appear in bug reports and other support requests.
This concept was also used during the development of Scalar for
similar reasons.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to respond to IPC requests from client
Git processes and respond with a list of modified pathnames
relative to the provided token.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:03:00 +0000 (18:03 +0000)]
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
Implement file system event listener on MacOS using FSEvent,
CoreFoundation, and CoreServices.
Co-authored-by: Kevin Willford <Kevin.Willford@microsoft.com> Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:59 +0000 (18:02 +0000)]
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
Include MacOS system declarations to allow us to use FSEvent and
CoreFoundation APIs. We need different versions of the declarations
for GCC vs. clang because of compiler and header file conflicts.
While it is quite possible to #include Apple's CoreServices.h when
compiling C source code with clang, trying to build it with GCC
currently fails with this error:
In file included
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/Security.framework/Headers/AuthSession.h:32,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/Security.framework/Headers/Security.h:42,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Frameworks/...
...OSServices.framework/Headers/CSIdentity.h:43,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Frameworks/...
...OSServices.framework/Headers/OSServices.h:29,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Frameworks/...
...LaunchServices.framework/Headers/IconsCore.h:23,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Frameworks/...
...LaunchServices.framework/Headers/LaunchServices.h:23,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Headers/CoreServices.h:45,
The underlying reason is that GCC (rightfully) objects that an `enum`
value such as `kAuthorizationExternalFormLength` is not a constant
(because it is not, the preprocessor has no knowledge of it, only the
actual C compiler does) and can therefore not be used to define the size
of a C array.
This is a known problem and tracked in GCC's bug tracker:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93082
In the meantime, let's not block things and go the slightly ugly route
of declaring/defining the FSEvents constants, data structures and
functions that we need, so that we can avoid above-mentioned issue.
Let's do this _only_ for GCC, though, so that the CI/PR builds (which
build both with clang and with GCC) can guarantee that we _are_ using
the correct data types.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:58 +0000 (18:02 +0000)]
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
Teach the win32 backend to register a watch on the working tree
root directory (recursively). Also watch the <gitdir> if it is
not inside the working tree. And to collect path change notifications
into batches and publish.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to build a list of changed paths and associate
them with a token-id. This will be used by the platform-specific
backends to accumulate changed paths in response to filesystem events.
The platform-specific file system listener thread receives file system
events containing one or more changed pathnames (with whatever
bucketing or grouping that is convenient for the file system). These
paths are accumulated (without locking) by the file system layer into
a `fsmonitor_batch`.
When the file system layer has drained the kernel event queue, it will
"publish" them to our token queue and make them visible to concurrent
client worker threads. The token layer is free to combine and/or de-dup
paths within these batches for efficient presentation to clients.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:55 +0000 (18:02 +0000)]
fsmonitor--daemon: add pathname classification
Teach fsmonitor--daemon to classify relative and absolute
pathnames and decide how they should be handled. This will
be used by the platform-specific backend to respond to each
filesystem event.
When we register for filesystem notifications on a directory,
we get events for everything (recursively) in the directory.
We want to report to clients changes to tracked and untracked
paths within the working directory proper. We do not want to
report changes within the .git directory, for example.
This classification will be used in a later commit by the
different backends to classify paths as events are received.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:54 +0000 (18:02 +0000)]
fsmonitor--daemon: implement 'start' command
Implement 'git fsmonitor--daemon start' command. This command starts
an instance of 'git fsmonitor--daemon run' in the background using
the new 'start_bg_command()' function.
We avoid the fork-and-call technique on Unix systems in favor of a
fork-and-exec technique. This gives us more uniform Trace2 child-*
events. It also makes our usage more consistent with Windows usage.
On Windows, teach 'git fsmonitor--daemon run' to optionally call
'FreeConsole()' to release handles to the inherited Win32 console
(despite being passed invalid handles for stdin/out/err). Without
this, command prompts and powershell terminal windows could hang
in "exit" until the last background child process exited or released
their Win32 console handle. (This was not seen with git-bash shells
because they don't have a Win32 console attached to them.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:53 +0000 (18:02 +0000)]
fsmonitor--daemon: implement 'run' command
Implement `run` command to try to begin listening for file system events.
This version defines the thread structure with a single fsmonitor_fs_listen
thread to watch for file system events and a simple IPC thread pool to
watch for connection from Git clients over a well-known named pipe or
Unix domain socket.
This commit does not actually do anything yet because the platform
backends are still just stubs.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:50 +0000 (18:02 +0000)]
fsmonitor--daemon: implement 'stop' and 'status' commands
Implement `stop` and `status` client commands to control and query the
status of a `fsmonitor--daemon` server process (and implicitly start a
server process if necessary).
Later commits will implement the actual server and monitor the file
system.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:49 +0000 (18:02 +0000)]
fsmonitor--daemon: add a built-in fsmonitor daemon
Create a built-in file system monitoring daemon that can be used by
the existing `fsmonitor` feature (protocol API and index extension)
to improve the performance of various Git commands, such as `status`.
The `fsmonitor--daemon` feature builds upon the `Simple IPC` API and
provides an alternative to hook access to existing fsmonitors such
as `watchman`.
This commit merely adds the new command without any functionality.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:47 +0000 (18:02 +0000)]
fsmonitor: use IPC to query the builtin FSMonitor daemon
Use simple IPC to directly communicate with the new builtin file
system monitor daemon when `core.fsmonitor` is set to true.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Fri, 25 Mar 2022 18:02:46 +0000 (18:02 +0000)]
fsmonitor: config settings are repository-specific
Move fsmonitor config settings to a new and opaque
`struct fsmonitor_settings` structure. Add a lazily-loaded pointer
to this into `struct repo_settings`
Create an `enum fsmonitor_mode` type in `struct fsmonitor_settings` to
represent the state of fsmonitor. This lets us represent which, if
any, fsmonitor provider (hook or IPC) is enabled.
Create `fsm_settings__get_*()` getters to lazily look up fsmonitor-
related config settings.
Get rid of the `core_fsmonitor` global variable. Move the code to
lookup the existing `core.fsmonitor` config value into the fsmonitor
settings.
Create a hook pathname variable in `struct fsmonitor-settings` and
only set it when in hook mode.
Extend the definition of `core.fsmonitor` to be either a boolean
or a hook pathname. When true, the builtin FSMonitor is used.
When false or unset, no FSMonitor (neither builtin nor hook) is
used.
The existing `core_fsmonitor` global variable was used to store the
pathname to the fsmonitor hook *and* it was used as a boolean to see
if fsmonitor was enabled. This dual usage and global visibility leads
to confusion when we add the IPC-based provider. So lets hide the
details in fsmonitor-settings.c and let it decide which provider to
use in the case of multiple settings. This avoids cluttering up
repo-settings.c with these private details.
A future commit in builtin-fsmonitor series will add the ability to
disqualify worktrees for various reasons, such as being mounted from a
remote volume, where fsmonitor should not be started. Having the
config settings hidden in fsmonitor-settings.c allows such worktree
restrictions to override the config values used.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of test_subcommand_inexact() was originally
introduced in e4d0c11c0 (repack: respect kept objects with '--write-midx
-b', 2021-12-20) with the intention to allow finding a subcommand based
on an initial set of arguments. The inexactness was intended as a way to
allow flexible options beyond that initial set, as opposed to
test_subcommand() which requires that the full list of options is
provided in its entirety.
The implementation began by copying test_subcommand() and replaced the
repeated argument 'printf' statement to append ".*" instead of "," to
each argument. This caused it to be more flexible than initially
intended.
The previous change deleted the only use of test_subcommand_inexact, so
instead of editing the helper, delete it.
Helped-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Fri, 25 Mar 2022 19:02:46 +0000 (19:02 +0000)]
t7700: check post-condition in kept-pack test
The '--write-midx -b packs non-kept objects' test in t7700-repack.sh
uses test_subcommand_inexact to check that 'git repack' properly adds
the '--honor-pack-keep' flag to the 'git pack-objects' subcommand.
However, the test_subcommand_inexact helper is more flexible than
initially designed, and this instance is the only one that makes use of
it: there are additional arguments between 'git pack-objects' and the
'--honor-pack-keep' flag. In order to make test_subcommand_inexact more
strict, we need to fix this instance.
This test checks that 'git repack --write-midx -a -b -d' will create a
new pack-file that does not contain the objects within the kept pack.
This behavior is possible because of the multi-pack-index bitmap that
will bitmap objects against multiple packs. Without --write-midx, the
objects in the kept pack would be duplicated so the resulting pack is
closed under reachability and bitmaps can be created against it. This is
discussed in more detail in e4d0c11c0 (repack: respect kept objects with
'--write-midx -b', 2021-12-20) which also introduced this instance of
test_subcommand_inexact.
To better verify the intended post-conditions while also removing this
instance of test_subcommand_inexact, rewrite the test to check the list
of packed objects in the kept pack and the list of the objects in the
newly-repacked pack-file _other_ than the kept pack. These lists should
be disjoint.
Be sure to include a non-kept pack-file and loose objects to be extra
careful that this is properly behaving with kept packs and not just
avoiding repacking all pack-files.
Co-authored-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: have --immediate emit valid TAP on failure
Change the "--immediate" option so that it emits valid TAP on
failure. Before this it would omit the required plan at the end,
e.g. under SANITIZE=leak we'd show a "No plan found in TAP output"
error from "prove":
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Parse errors: No plan found in TAP output
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.18 cusr 0.06 csys = 0.27 CPU)
Result: FAIL
Now we'll emit output that doesn't result in TAP parsing failures:
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Junio C Hamano [Thu, 24 Mar 2022 17:33:10 +0000 (10:33 -0700)]
reset: show --no-refresh in the short-help
In the short help output from "git reset -h", the recently added
"--[no-]refresh" option is shown like so:
--refresh skip refreshing the index after reset
which explains what happens when the option is given in the negative
form, i.e. "--no-refresh". We could rephrase the explanation to
read "refresh the index after reset (default)" to hint that the user
can say "--no-refresh" to override the default, but listing the
"--no-refresh" form in the list of options would be more helpful.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk> Acked-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.34:
Git 2.34.2
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.33:
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.32:
Git 2.32.1
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.31:
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.30:
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
Fix `GIT_CEILING_DIRECTORIES` with `C:\` and the likes
When determining the length of the longest ancestor of a given path with
respect to to e.g. `GIT_CEILING_DIRECTORIES`, we special-case the root
directory by returning 0 (i.e. we pretend that the path `/` does not end
in a slash by virtually stripping it).
That is the correct behavior because when normalizing paths, the root
directory is special: all other directory paths have their trailing
slash stripped, but not the root directory's path (because it would
become the empty string, which is not a legal path).
However, this special-casing of the root directory in
`longest_ancestor_length()` completely forgets about Windows-style root
directories, e.g. `C:\`. These _also_ get normalized with a trailing
slash (because `C:` would actually refer to the current directory on
that drive, not necessarily to its root directory).
In fc56c7b34b (mingw: accomodate t0060-path-utils for MSYS2,
2016-01-27), we almost got it right. We noticed that
`longest_ancestor_length()` expects a slash _after_ the matched prefix,
and if the prefix already ends in a slash, the normalized path won't
ever match and -1 is returned.
But then that commit went astray: The correct fix is not to adjust the
_tests_ to expect an incorrect -1 when that function is fed a prefix
that ends in a slash, but instead to treat such a prefix as if the
trailing slash had been removed.
Likewise, that function needs to handle the case where it is fed a path
that ends in a slash (not only a prefix that ends in a slash): if it
matches the prefix (plus trailing slash), we still need to verify that
the path does not end there, otherwise the prefix is not actually an
ancestor of the path but identical to it (and we need to return -1 in
that case).
With these two adjustments, we no longer need to play games in t0060
where we only add `$rootoff` if the passed prefix is different from the
MSYS2 pseudo root, instead we also add it for the MSYS2 pseudo root
itself. We do have to be careful to skip that logic entirely for Windows
paths, though, because they do are not subject to that MSYS2 pseudo root
treatment.
This patch fixes the scenario where a user has set
`GIT_CEILING_DIRECTORIES=C:\`, which would be ignored otherwise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Continue the work started in 33d7bdd6459 (builtin/reflog.c: use
parse-options api for expire, delete subcommands, 2022-01-06) and
convert the cmd_reflog() function itself to use the parse_options()
API.
Let's also add a test which would fail if we forgot
PARSE_OPT_NO_INTERNAL_HELP here, as well as making sure that we'll
still pass through "--" by supplying PARSE_OPT_KEEP_DASHDASH. For that
test we need to change "test_commit()" to accept files starting with
"--".
The "git reflog -h" usage will now show the usage for all of the
sub-commands, rather than a terse summary which wasn't
correct (e.g. "git reflog exists" is not a valid command). See my 8757b35d443 (commit-graph: define common usage with a macro,
2021-08-23) for prior art.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Wed, 23 Mar 2022 18:18:00 +0000 (18:18 +0000)]
reset: remove 'reset.refresh' config option
Remove the 'reset.refresh' option, requiring that users explicitly specify
'--no-refresh' if they want to skip refreshing the index.
The 'reset.refresh' option was introduced in 101cee42dd (reset: introduce
--[no-]refresh option to --mixed, 2022-03-11) as a replacement for the
refresh-skipping behavior originally controlled by 'reset.quiet'.
Although 'reset.refresh=false' functionally served the same purpose as
'reset.quiet=true', it exposed [1] the fact that the existence of a global
"skip refresh" option could potentially cause problems for users. Allowing a
global config option to avoid refreshing the index forces scripts using 'git
reset --mixed' to defensively use '--refresh' if index refresh is expected;
if that option is missing, behavior of a script could vary from user-to-user
without explanation.
Furthermore, globally disabling index refresh in 'reset --mixed' was
initially devised as a passive performance improvement; since the
introduction of the option, other changes have been made to Git (e.g., the
sparse index) with a greater potential performance impact without
sacrificing index correctness. Therefore, we can more aggressively err on
the side of correctness and limit the cases of skipping index refresh to
only when a user specifies the '--no-refresh' option.
Victoria Dye [Wed, 23 Mar 2022 18:17:59 +0000 (18:17 +0000)]
reset: remove 'reset.quiet' config option
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Wed, 23 Mar 2022 18:17:58 +0000 (18:17 +0000)]
reset: do not make '--quiet' disable index refresh
Update '--quiet' to no longer implicitly skip refreshing the index in a
mixed reset. Users now have the ability to explicitly disable refreshing the
index with the '--no-refresh' option, so they no longer need to use
'--quiet' to do so. Moreover, we explicitly remove the refresh-skipping
behavior from '--quiet' because it is completely unrelated to the stated
purpose of the option: "Be quiet, only report errors."
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize away strbuf_expand() call with a hardcoded formatting logic
specific for the default format in the --batch and --batch-check
options of "git cat-file".
* jc/cat-file-batch-default-format-optim:
cat-file: skip expanding default format
Junio C Hamano [Wed, 23 Mar 2022 21:09:29 +0000 (14:09 -0700)]
Merge branch 'jk/name-rev-w-genno'
"git name-rev" learned to use the generation numbers when setting
the lower bound of searching commits used to explain the revision,
when available, instead of committer time.
* jk/name-rev-w-genno:
name-rev: use generation numbers if available
Get rid of one use of __asm__() GCC extension that does not help us
much these days, which has an added advantage of not having to
worry about -pedantic complaining.
* bc/block-sha1-without-gcc-asm-extension:
block-sha1: remove use of obsolete x86 assembly
Junio C Hamano [Wed, 23 Mar 2022 21:09:28 +0000 (14:09 -0700)]
Merge branch 'gc/submodule-update-part1'
Rewrite of "git submodule update" in C (early part).
* gc/submodule-update-part1:
submodule--helper update-clone: check for --filter and --init
submodule update: add tests for --filter
submodule--helper: remove ensure-core-worktree
submodule--helper update-clone: learn --init
submodule--helper: allow setting superprefix for init_submodule()
submodule--helper: refactor get_submodule_displaypath()
submodule--helper run-update-procedure: learn --remote
submodule--helper: don't use bitfield indirection for parse_options()
submodule--helper: get remote names from any repository
submodule--helper run-update-procedure: remove --suboid
submodule--helper: reorganize code for sh to C conversion
submodule--helper: remove update-module-mode
submodule tests: test for init and update failure output
Derrick Stolee [Tue, 22 Mar 2022 17:28:39 +0000 (17:28 +0000)]
bundle: output hash information in 'verify'
The previous change moved the 'filter' capability to the end of the 'git
bundle verify' output. Now, add the 'object-format' capability to the
output, when it exists.
This change makes 'git bundle verify' output the hash used in all cases,
even if the capability is not in the bundle. This means that v2 bundles
will always output that they use "sha1". This might look noisy to some
users, but it does simplify the implementation and the test strategy for
this feature.
Since 'verify' ends early when a prerequisite commit is missing, we need
to insert this hash message carefully into our expected test output
throughout t6020.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 22 Mar 2022 17:28:38 +0000 (17:28 +0000)]
bundle: move capabilities to end of 'verify'
The 'filter' capability was added in 105c6f14a (bundle: parse filter
capability, 2022-03-09), but was added in a strange place in the 'git
bundle verify' output.
The tests for this show output like the following:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle records a complete history.
This looks very odd if we have a thin bundle that contains boundary
commits instead of a complete history:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle requires these 2 refs:
<COMMIT3>
<COMMIT4>
This separation between tip refs and boundary refs is unfortunate. Move
the filter capability output to the end of the output. Update the
documentation to match.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 22 Mar 2022 17:28:36 +0000 (17:28 +0000)]
pack-objects: move revs out of get_object_list()
We intend to parse the --filter option directly into revs.filter, but we
first need to move the 'revs' variable out of get_object_list() and pass
it as a pointer instead. This change only deals with the issues of
making that work.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 22 Mar 2022 17:28:35 +0000 (17:28 +0000)]
list-objects-filter: remove CL_ARG__FILTER
We have established the command-line interface for the --[no-]filter
options for a while now, so we do not need a helper to make this
editable in the future.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Justin Donnelly [Sun, 27 Feb 2022 19:57:12 +0000 (19:57 +0000)]
git-prompt: put upstream comments together
Commit 6d158cba28 (bash completion: Support "divergence from upstream"
messages in __git_ps1, 2010-06-17) introduced support for indicating
divergence from upstream in the PS1 prompt. The comments at the top of
git-prompt.sh that were introduced with that commit are several
paragraphs long. Over the years, other comments have been inserted in
between the paragraphs relating to divergence from upstream.
This commit puts the comments relating to divergence from upstream back
together.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com> Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Justin Donnelly [Sun, 27 Feb 2022 19:57:11 +0000 (19:57 +0000)]
git-prompt: make long upstream state indicator consistent
Use a pipe as a separator before long upstream state indicator. This is
consistent with long state indicators for sparse and in-progress
operations (e.g. merge).
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are long state indicators, they appear after short
state indicators if there are any, or after the branch name if there are
no short state indicators. Each long state indicator begins with a pipe
(`|`) as a separator.
Justin Donnelly [Sun, 27 Feb 2022 19:57:10 +0000 (19:57 +0000)]
git-prompt: make upstream state indicator location consistent
Make upstream state indicator location more consistent with similar
state indicators (e.g. sparse). Group the short upstream state indicator
(`=`, `<`, `>`, or `<>`) with other short state indicators immediately
after the branch name. Previously short and long upstream state
indicators appeared after all other state indicators.
Use a separator (`SP` or `GIT_PS1_STATESEPARATOR`) between branch name
and short upstream state indicator. Previously the short upstream state
indicator would sometimes appear directly adjacent to the branch name
instead of being separated.
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are short state indicators, they appear together
after the branch name and separated from it by `SP` or
`GIT_PS1_STATESEPARATOR`.
Before/after examples with short upstream state indicator:
| Before | After |
| ---------------- | ---------------- |
| (main=) | (main =) |
| (main|SPARSE=) | (main =|SPARSE) |
| (main %|SPARSE=) | (main %=|SPARSE) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com> Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Justin Donnelly [Sun, 27 Feb 2022 19:57:09 +0000 (19:57 +0000)]
git-prompt: rename `upstream` to `upstream_type`
In `__git_ps1_show_upstream` rename the variable `upstream` to
`upstream_type`. This allows `__git_ps1_show_upstream` to reference a
variable named `upstream` that is declared `local` in `__git_ps1`, which
calls `__git_ps1_show_upstream`.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com> Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
hooks: fix "invoked hook" regression in a8cc5943338
Fix a regression in a8cc5943338 (hooks: fix an obscure TOCTOU "did we
just run a hook?" race, 2022-03-07): The "invoked_hook" variable
passed to run_commit_hook() wasn't passed forward to run_hooks_opt(),
as push_to_checkout() in that commit correctly did.
Whether we ran the code contingent on having run the hook or not was
thus undefined, but in practice on most (all?) modern platforms we'd
have run it (almost?) all the time, since stack variables will get
initialized to some random value, which most of the time isn't "0".
This bug was revealed by running e.g. "t5537-fetch-shallow.sh" with
the --valgrind option. Unfortunately running the whole test suite with
--valgrind is really slow, so we didn't have a CI job that spotted
this. The --valgrind output was:
==31275== Conditional jump or move depends on uninitialised value(s)
==31275== at 0x43C63F: prepare_to_commit (commit.c:1058)
==31275== by 0x4396A5: cmd_commit (commit.c:1722)
==31275== by 0x407C8A: run_builtin (git.c:465)
==31275== by 0x406741: handle_builtin (git.c:718)
==31275== by 0x407665: run_argv (git.c:785)
==31275== by 0x406500: cmd_main (git.c:916)
==31275== by 0x510839: main (common-main.c:56)
==31275== Uninitialised value was created by a stack allocation
==31275== at 0x43B344: prepare_to_commit (commit.c:719)
Reported-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the various if/else in the callbacks for the "fast path" a lot
easier to read by just using common functions for the parts that are
common, and have per-format callbacks for those parts that are
different.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-tree: detect and error on --name-only --name-status
The --name-only and --name-status options are synonyms, but let's
detect and error if both are provided.
In addition let's add explicit --format tests for the combination of
these various options.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --format option to ls-tree. It has an existing default output,
and then --long and --name-only options to emit the default output
along with the objectsize and, or to only emit object paths.
Rather than add --type-only, --object-only etc. we can just support a
--format using a strbuf_expand() similar to "for-each-ref
--format". We might still add such options in the future for
convenience.
The --format implementation is slower than the existing code, but this
change does not cause any performance regressions. We'll leave the
existing show_tree() unchanged, and only run show_tree_fmt() in if
a --format different than the hardcoded built-in ones corresponding to
the existing modes is provided.
I.e. something like the "--long" output would be much slower with
this, mainly due to how we need to allocate various things to do with
quote.c instead of spewing the output directly to stdout.
The new option of '--format' comes from Ævar Arnfjörð Bjarmasonn's
idea and suggestion, this commit makes modifications in terms of the
original discussion on community [1].
In [1] there was a "GIT_TEST_LS_TREE_FORMAT_BACKEND" variable to
ensure that we had test coverage for passing tests that would
otherwise use show_tree() through show_tree_fmt(), and thus that the
formatting mechanism could handle all the same cases as the
non-formatting options.
Somewhere in subsequent re-rolls of that we seem to have drifted away
from what the goal of these tests should be. We're trying to ensure
correctness of show_tree_fmt(). We can't tell if we "hit [the]
fast-path" here, and instead of having an explicit test for that, we
can just add it to something our "test_ls_tree_format" tests for.
Here is the statistics about performance tests:
1. Default format (hitten the builtin formats):
"git ls-tree <tree-ish>" vs "--format='%(mode) %(type) %(object)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r HEAD
Time (mean ± σ): 105.2 ms ± 3.3 ms [User: 84.3 ms, System: 20.8 ms]
Range (min … max): 99.2 ms … 113.2 ms 28 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD
Time (mean ± σ): 106.4 ms ± 2.7 ms [User: 86.1 ms, System: 20.2 ms]
Range (min … max): 100.2 ms … 110.5 ms 29 runs
2. Default format includes object size (hitten the builtin formats):
"git ls-tree -l <tree-ish>" vs "--format='%(mode) %(type) %(object) %(size:padded)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r -l HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r -l HEAD
Time (mean ± σ): 335.1 ms ± 6.5 ms [User: 304.6 ms, System: 30.4 ms]
Range (min … max): 327.5 ms … 348.4 ms 10 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD
Time (mean ± σ): 337.2 ms ± 8.2 ms [User: 309.2 ms, System: 27.9 ms]
Range (min … max): 328.8 ms … 349.4 ms 10 runs
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teng Long [Wed, 23 Mar 2022 09:13:13 +0000 (17:13 +0800)]
ls-tree: support --object-only option for "git-ls-tree"
'--object-only' is an alias for '--format=%(objectname)'. It cannot
be used together other format-altering options like '--name-only',
'--long' or '--format', they are mutually exclusive.
The "--name-only" option outputs <filepath> only. Likewise, <objectName>
is another high frequency used field, so implement '--object-only' option
will bring intuitive and clear semantics for this scenario. Using
'--format=%(objectname)' we can achieve a similar effect, but the former
is with a lower learning cost(without knowing the format requirement
of '--format' option).
Even so, if a user is prefer to use "--format=%(objectname)", this is entirely
welcome because they are not only equivalent in function, but also have almost
identical performance. The reason is this commit also add the specific of
"--format=%(objectname)" to the current fast-pathes (builtin formats) to
avoid running unnecessary parsing mechanisms.
The following performance benchmarks are based on torvalds/linux.git:
When hit the fast-path:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --object-only HEAD
Time (mean ± σ): 83.6 ms ± 2.0 ms [User: 59.4 ms, System: 24.1 ms]
Range (min … max): 80.4 ms … 87.2 ms 35 runs
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(objectname)' HEAD
Time (mean ± σ): 84.1 ms ± 1.8 ms [User: 61.7 ms, System: 22.3 ms]
Range (min … max): 80.9 ms … 87.5 ms 35 runs
But for a customized format, it will be slower:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='oid: %(objectname)' HEAD
Time (mean ± σ): 96.5 ms ± 2.5 ms [User: 72.9 ms, System: 23.5 ms]
Range (min … max): 93.1 ms … 104.1 ms 31 runs
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A convenient way to pad strings is to use something like
`strbuf_addf(&buf, "%20s", "Hello, world!")`.
However, the Coccinelle rule that forbids a format `"%s"` with a
constant string argument cast too wide a net, and also forbade such
padding.
The original rule was introduced by commit:
28c23cd4c39 (strbuf.cocci: suggest strbuf_addbuf() to add one strbuf to an other, 2019-01-25)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"show_tree_data" is a struct that packages the necessary fields for
"show_tree()". This commit is a pre-prepared commit for supporting
"--format" option and it does not affect any existing functionality.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teng Long [Wed, 23 Mar 2022 09:13:09 +0000 (17:13 +0800)]
ls-tree: slightly refactor `show_tree()`
This is a non-functional change, we introduce an enum "ls_tree_cmdmode"
then use it to mark which columns to output.
This has the advantage of making the show_tree logic simpler and more
readable, as well as making it easier to extend new options (for example,
if we want to add a "--object-only" option, we just need to add a similar
"short-circuit logic in "show_tree()").
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teng Long [Wed, 23 Mar 2022 09:13:08 +0000 (17:13 +0800)]
ls-tree: fix "--name-only" and "--long" combined use bug
If we execute "git ls-tree" with combined "--name-only" and "--long"
, only the pathname will be printed, the size is omitted (the original
discoverer was Peff in [1]).
This commit fix this issue by using `OPT_CMDMODE()` instead to make both
of them mutually exclusive.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teng Long [Wed, 23 Mar 2022 09:13:07 +0000 (17:13 +0800)]
ls-tree: simplify nesting if/else logic in "show_tree()"
Use the object_type() function to determine the object type from the
"mode" passed to us by read_tree(), instead of doing so with the S_*()
macros.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyronetengb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teng Long [Wed, 23 Mar 2022 09:13:06 +0000 (17:13 +0800)]
ls-tree: rename "retval" to "recurse" in "show_tree()"
The variable which "show_tree()" return is named "retval", a name that's
a little hard to understand. The commit rename "retval" to "recurse"
which is a more meaningful name than before in the context. We do not
need to take a look at "read_tree_at()" in "tree.c" to make sure what
does "retval" mean.
Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
The "struct strbuf"'s "len" member is a "size_t", not an "int", so
let's change our corresponding types accordingly. This also changes
the "len" and "speclen" variables, which are likewise used to store
the return value of strlen(), which returns "size_t", not "int".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-tree: use "enum object_type", not {blob,tree,commit}_type
Change the ls-tree.c code to use type_name() on the enum instead of
using the string constants. This doesn't matter either way for
performance, but makes this a bit easier to read as we'll no longer
need a strcmp() here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove code added in f35a6d3bce7 (Teach core object handling functions
about gitlinks, 2007-04-09), later patched in 7d0b18a4da1 (Add output
flushing before fork(), 2008-08-04), and then finally ending up in its
current form in d3bee161fef (tree.c: allow read_tree_recursive() to
traverse gitlink entries, 2009-01-25). All while being commented-out!
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --name-status synonym for --name-only added in c639a5548a5 (ls-tree: --name-only, 2005-12-01) had no tests, let's
make sure it works the same way as its sibling.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 21 Mar 2022 22:14:24 +0000 (15:14 -0700)]
Merge branch 'pw/single-key-interactive'
The single-key interactive operation used by "git add -p" has been
made more robust.
* pw/single-key-interactive:
add -p: disable stdin buffering when interactive.singlekey is set
terminal: set VMIN and VTIME in non-canonical mode
terminal: pop signal handler when terminal is restored
terminal: always reset terminal when reading without echo
The method to trigger malloc check used in our tests no longer work
with newer versions of glibc.
* ep/test-malloc-check-with-glibc-2.34:
test-lib: declare local variables as local
test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34
* sm/no-git-in-upstream-of-pipe-in-tests:
t0030-t0050: avoid pipes with Git on LHS
t0001-t0028: avoid pipes with Git on LHS
t0003: avoid pipes with Git on LHS
Kirill Frolov [Mon, 21 Mar 2022 12:43:22 +0000 (12:43 +0000)]
git-p4: fix issue with multiple perforce remotes
Single perforce branch might be sync'ed multiple times with different
revision numbers, so it will be seen to Git as complete different
commits. This can be done by the following command:
git p4 sync --branch=NAME //perforce/path...
It is assumed, that this command applied multiple times and
peforce repository changes between command invocations.
In such situation, git p4 will see multiple perforce branches with
same name and different revision numbers. The problem is that to make
a shelve, git-p4 script will try to find "origin" branch, if not
specified in command line explicitly. And previously script selected
any branch with same name and don't mention particular revision number.
Later this may cause failure of the command "git diff-tree -r $rev^ $rev",
so shelve can't be created (due to wrong origin branch/commit).
This commit fixes the heuristic by which git p4 selects origin branch:
first it tries to select branch with same perforce path and perforce
revision, and if it fails, then selects branch with only same perforce
path (ignoring perforce revision number).
Signed-off-by: Kirill Frolov <k.frolov@samsung.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the use of a non-existing variable added in my 0b6d0bc9246 (Makefiles: add and use wildcard "mkdir -p" template,
2022-03-03) to use the hardcoded whitespace padding for "QUIET" rules
instead. The wspfx_SQ was left from an earlier (rebased out) commit
preceding 0b6d0bc9246[1].
setup_git_directory(): add an owner check for the top-level directory
It poses a security risk to search for a git directory outside of the
directories owned by the current user.
For example, it is common e.g. in computer pools of educational
institutes to have a "scratch" space: a mounted disk with plenty of
space that is regularly swiped where any authenticated user can create
a directory to do their work. Merely navigating to such a space with a
Git-enabled `PS1` when there is a maliciously-crafted `/scratch/.git/`
can lead to a compromised account.
The same holds true in multi-user setups running Windows, as `C:\` is
writable to every authenticated user by default.
To plug this vulnerability, we stop Git from accepting top-level
directories owned by someone other than the current user. We avoid
looking at the ownership of each and every directories between the
current and the top-level one (if there are any between) to avoid
introducing a performance bottleneck.
This new default behavior is obviously incompatible with the concept of
shared repositories, where we expect the top-level directory to be owned
by only one of its legitimate users. To re-enable that use case, we add
support for adding exceptions from the new default behavior via the
config setting `safe.directory`.
The `safe.directory` config setting is only respected in the system and
global configs, not from repository configs or via the command-line, and
can have multiple values to allow for multiple shared repositories.
We are particularly careful to provide a helpful message to any user
trying to use a shared repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add a function to determine whether a path is owned by the current user
This function will be used in the next commit to prevent
`setup_git_directory()` from discovering a repository in a directory
that is owned by someone other than the current user.
Note: We cannot simply use `st.st_uid` on Windows just like we do on
Linux and other Unix-like platforms: according to
https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/stat-functions
this field is always zero on Windows (because Windows' idea of a user ID
does not fit into a single numerical value). Therefore, we have to do
something a little involved to replicate the same functionality there.
Also note: On Windows, a user's home directory is not actually owned by
said user, but by the administrator. For all practical purposes, it is
under the user's control, though, therefore we pretend that it is owned
by the user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
John Cai [Fri, 18 Mar 2022 13:54:03 +0000 (13:54 +0000)]
rebase: set REF_HEAD_DETACH in checkout_up_to_date()
"git rebase A B" where B is not a commit should behave as if the
HEAD got detached at B and then the detached HEAD got rebased on top
of A. A bug however overwrites the current branch to point at B,
when B is a descendant of A (i.e. the rebase ends up being a
fast-forward). See [1] for the original bug report.
The callstack from checkout_up_to_date() is the following:
When B is not a valid branch but an oid, rebase sets the head_name
of rebase_options to NULL. This value gets passed down this call
chain through the branch member of reset_head_opts also getting set
to NULL all the way to update_refs().
Then update_refs() checks ropts.branch to decide whether or not to switch
branches. If ropts.branch is NULL, it calls update_ref() to update HEAD.
At this point however, from rebase's point of view, we want a detached
HEAD. But, since checkout_up_to_date() does not set the RESET_HEAD_DETACH
flag, the update_ref() call will deference HEAD and update the branch its
pointing to. We want the HEAD detached at B instead.
Fix this bug by adding the RESET_HEAD_DETACH flag in
checkout_up_to_date if B is not a valid branch, so that once
reset_head() calls update_refs(), it calls update_ref() with
REF_NO_DEREF which updates HEAD directly intead of deferencing it
and updating the branch that HEAD points to.
projects / thirdparty / git.git / log
